diff options
Diffstat (limited to 'keyboards')
| -rwxr-xr-x | keyboards/bm16s/bm16s.h | 15 | ||||
| -rwxr-xr-x | keyboards/bm16s/config.h | 46 | ||||
| -rw-r--r-- | keyboards/bm16s/info.json | 30 | ||||
| -rwxr-xr-x | keyboards/bm16s/keymaps/default/keymap.c | 16 | ||||
| -rwxr-xr-x | keyboards/bm16s/keymaps/media/keymap.c | 20 | ||||
| -rw-r--r-- | keyboards/bm16s/readme.md | 13 | ||||
| -rwxr-xr-x | keyboards/bm16s/rules.mk | 72 |
7 files changed, 212 insertions, 0 deletions
diff --git a/keyboards/bm16s/bm16s.h b/keyboards/bm16s/bm16s.h new file mode 100755 index 000000000..9aca8c0e3 --- /dev/null +++ b/keyboards/bm16s/bm16s.h @@ -0,0 +1,15 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} diff --git a/keyboards/bm16s/config.h b/keyboards/bm16s/config.h new file mode 100755 index 000000000..568e80b39 --- /dev/null +++ b/keyboards/bm16s/config.h @@ -0,0 +1,46 @@ +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KPrepublic +#define PRODUCT bm16s +#define DESCRIPTION KPrepublic bm16s + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D1, D0, D3, D2 } +#define MATRIX_COL_PINS { F7, F6, D4, D6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN + #define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLIGHT_ANIMATIONS + #define RGBLED_NUM 16 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/bm16s/info.json b/keyboards/bm16s/info.json new file mode 100644 index 000000000..706453561 --- /dev/null +++ b/keyboards/bm16s/info.json @@ -0,0 +1,30 @@ +{ + "keyboard_name": "bm16s", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x4": { + "key_count": 16, + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3} + ] + } + } + }
\ No newline at end of file diff --git a/keyboards/bm16s/keymaps/default/keymap.c b/keyboards/bm16s/keymaps/default/keymap.c new file mode 100755 index 000000000..9dd697a0d --- /dev/null +++ b/keyboards/bm16s/keymaps/default/keymap.c @@ -0,0 +1,16 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_4x4( + KC_KP_7, KC_KP_8, KC_KP_9, MO(1), \ + KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \ + KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT \ + ), + [1] = LAYOUT_ortho_4x4( + RESET, BL_STEP, _______, KC_VOLU, \ + BL_TOGG, BL_DEC, BL_INC, KC_VOLD, \ + RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \ + RGB_SAI, RGB_SAD, RGB_HUD, _______ \ + ), +};
\ No newline at end of file diff --git a/keyboards/bm16s/keymaps/media/keymap.c b/keyboards/bm16s/keymaps/media/keymap.c new file mode 100755 index 000000000..082879320 --- /dev/null +++ b/keyboards/bm16s/keymaps/media/keymap.c @@ -0,0 +1,20 @@ +#include QMK_KEYBOARD_H + +#define RGB_BRU RGB_VAI +#define RGB_BRD RGB_VAD + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_4x4( + KC_BRIU, _______, _______, KC_VOLU, \ + KC_BRID, _______, _______, KC_VOLD, \ + _______, _______, _______, KC_MUTE, \ + KC_MPRV, KC_MPLY, KC_MNXT, MO(1) \ + ), + [1] = LAYOUT_ortho_4x4( + RESET, _______, _______, _______, \ + RGB_SPD, RGB_BRU, RGB_SPI, _______, \ + RGB_RMOD, RGB_BRD, RGB_MOD, _______, \ + RGB_TOG, _______, _______, _______ \ + ), +};
\ No newline at end of file diff --git a/keyboards/bm16s/readme.md b/keyboards/bm16s/readme.md new file mode 100644 index 000000000..097a38008 --- /dev/null +++ b/keyboards/bm16s/readme.md @@ -0,0 +1,13 @@ +# bm16s + +A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches. + +Keyboard Maintainer: QMK Community +Hardware Supported: The PCBs, controllers supported +Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169) + +Make example for this keyboard (after setting up your build environment): + + make bm16s:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bm16s/rules.mk b/keyboards/bm16s/rules.mk new file mode 100755 index 000000000..f4f1dfd63 --- /dev/null +++ b/keyboards/bm16s/rules.mk @@ -0,0 +1,72 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes + +LAYOUTS = ortho_4x4
\ No newline at end of file |