diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/jj40/backlight.c | 213 | ||||
| -rw-r--r-- | keyboards/jj40/backlight_custom.h | 15 | ||||
| -rw-r--r-- | keyboards/jj40/breathing_custom.h | 140 | ||||
| -rw-r--r-- | keyboards/jj40/config.h | 40 | ||||
| -rw-r--r-- | keyboards/jj40/i2c.c | 104 | ||||
| -rw-r--r-- | keyboards/jj40/i2c.h | 25 | ||||
| -rw-r--r-- | keyboards/jj40/jj40.c | 61 | ||||
| -rw-r--r-- | keyboards/jj40/jj40.h | 86 | ||||
| -rw-r--r-- | keyboards/jj40/keymaps/default/keymap.c | 59 | ||||
| -rw-r--r-- | keyboards/jj40/matrix.c | 112 | ||||
| -rw-r--r-- | keyboards/jj40/rules.mk | 44 |
11 files changed, 136 insertions, 763 deletions
diff --git a/keyboards/jj40/backlight.c b/keyboards/jj40/backlight.c deleted file mode 100644 index fbd241fa9..000000000 --- a/keyboards/jj40/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj40/backlight_custom.h b/keyboards/jj40/backlight_custom.h deleted file mode 100644 index 7210be840..000000000 --- a/keyboards/jj40/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj40/breathing_custom.h b/keyboards/jj40/breathing_custom.h deleted file mode 100644 index 71416b1b4..000000000 --- a/keyboards/jj40/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 67561b0b2..e88147ac8 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -1,51 +1,55 @@ /* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. - This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "config_common.h" +#pragma once -#ifndef CONFIG_H -#define CONFIG_H +#include "config_common.h" #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. -#define MANUFACTURER winkeyless.kr +#define MANUFACTURER Kprepublic #define PRODUCT jj40 /* matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 +#define MATRIX_ROW_PINS { B0, B1, B3, B4 } +#define MATRIX_COL_PINS { C4, C5, C6, C7, A4, A5, A6, A7, A3, A2, A1, A0 } /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work - -#define TAPPING_TOGGLE 3 - -#define NO_UART 1 +// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a /* RGB underglow */ -// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. -// The same pin is used on the JJ40, at least. +// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. #define RGBLED_NUM 5 -#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. #define RGBLIGHT_ANIMATIONS -#endif +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +#define NO_UART 1 + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jj40/i2c.c b/keyboards/jj40/i2c.c deleted file mode 100644 index c27f3e3d1..000000000 --- a/keyboards/jj40/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the start condition was successfully transmitted - if ((TWSR & 0xF8) != TW_START) { - return 1; - } - - // transmit address and wait - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return 1; - } - - return 0; -} - -void i2c_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); -} - -uint8_t i2c_write(uint8_t data) { - TWDR = data; - - // transmit data and wait - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - - return 0; -} - -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { - if (i2c_start(address)) { - return 1; - } - - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) { - return 1; - } - } - - i2c_stop(); - - return 0; -} diff --git a/keyboards/jj40/i2c.h b/keyboards/jj40/i2c.h deleted file mode 100644 index 27c9d3d05..000000000 --- a/keyboards/jj40/i2c.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/jj40/jj40.c b/keyboards/jj40/jj40.c index 51f5295f4..26cfa6c06 100644 --- a/keyboards/jj40/jj40.c +++ b/keyboards/jj40/jj40.c @@ -18,53 +18,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "jj40.h" -#include <avr/pgmspace.h> - -#include "action_layer.h" -#include "quantum.h" +#ifdef RGBLIGHT_ENABLE -#include "i2c.h" +#include <string.h> +#include "i2c_master.h" +#include "rgblight.h" -#include "backlight.h" -#include "backlight_custom.h" +extern rgblight_config_t rgblight_config; -// for keyboard subdirectory level init functions -// @Override void matrix_init_kb(void) { + i2c_init(); // call user level keymaps, if any matrix_init_user(); } - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - // custom RGB driver void rgblight_set(void) { if (!rgblight_config.enable) { - for (uint8_t i=0; i<RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } + memset(led, 0, 3 * RGBLED_NUM); } - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } bool rgb_init = false; @@ -72,26 +45,12 @@ bool rgb_init = false; void matrix_scan_kb(void) { // if LEDs were previously on before poweroff, turn them back on if (rgb_init == false && rgblight_config.enable) { - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); rgb_init = true; } rgblight_task(); -#else -void matrix_scan_kb(void) { -#endif matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__((weak)) // overridable -void matrix_init_user(void) { - } - -__attribute__((weak)) // overridable -void matrix_scan_user(void) { - -} +#endif diff --git a/keyboards/jj40/jj40.h b/keyboards/jj40/jj40.h index 731f2ff45..fce68eda5 100644 --- a/keyboards/jj40/jj40.h +++ b/keyboards/jj40/jj40.h @@ -15,80 +15,68 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H +#pragma once #include "quantum.h" -#include "quantum_keycodes.h" -#include "keycode.h" -#include "action.h" - -void matrix_init_user(void); // TODO port this to other PS2AVRGB boards - -#define XXX KC_NO +#define ___ KC_NO #define LAYOUT_ortho_4x12( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B } \ } #define LAYOUT_planck_mit( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K3X, K37, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K3X, XXX, K38, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K3X, ___, K37, K38, K39, K3A, K3B } \ } #define LAYOUT_planck_1x2uR( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K3X, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K36, K3X, XXX, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K35, K3X, ___, K38, K39, K3A, K3B } \ } #define LAYOUT_kc( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ - ) \ - LAYOUT_ortho_4x12( \ - KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \ - KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \ - KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \ - KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +LAYOUT_ortho_4x12( \ + KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \ + KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \ + KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \ + KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \ ) #define LAYOUT LAYOUT_planck_mit - #define LAYOUT_kc_ortho_4x12 LAYOUT_kc - -#endif +#define KC_LAYOUT_ortho_4x12 LAYOUT_kc diff --git a/keyboards/jj40/keymaps/default/keymap.c b/keyboards/jj40/keymaps/default/keymap.c index d84b01b15..47c6bada6 100644 --- a/keyboards/jj40/keymaps/default/keymap.c +++ b/keyboards/jj40/keymaps/default/keymap.c @@ -1,16 +1,30 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H - -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, +enum layers { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST, }; +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------. @@ -27,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - _______, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + _______, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ ), /* Lower @@ -64,10 +78,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, BL_TOGG, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ) }; -// Loop -void matrix_scan_user(void) { - // Empty -}; +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/jj40/matrix.c b/keyboards/jj40/matrix.c deleted file mode 100644 index 245813dfd..000000000 --- a/keyboards/jj40/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/delay.h> - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<<PIND7); - // all columns are pulled-up - PORTA = 0xFF; - PORTC |= (0b111111<<2); - PORTD |= (1<<PIND7); - - // initialize matrix state: all keys off - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0x00; - matrix_debouncing[row] = 0x00; - } - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index 697e17a01..3e496f97e 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -30,29 +30,29 @@ F_CPU = 12000000 # automatically (+60). See bootloader.mk for all options. BOOTLOADER = bootloadHID -# build options -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes - -BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes - -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -KEY_LOCK_ENABLE = yes - +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight.c +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex |