diff options
Diffstat (limited to 'keyboards')
637 files changed, 57586 insertions, 0 deletions
diff --git a/keyboards/alps64/Makefile b/keyboards/alps64/Makefile new file mode 100644 index 000000000..d8325e6c8 --- /dev/null +++ b/keyboards/alps64/Makefile @@ -0,0 +1,70 @@ + + +# Target file name (without extension). + +# project specific files +SRC = led.c + +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/alps64/alps64.c b/keyboards/alps64/alps64.c new file mode 100644 index 000000000..472d1d445 --- /dev/null +++ b/keyboards/alps64/alps64.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "quantum.h" + +#define LED_ON() do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0) +#define LED_OFF() do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0) +#define LED_TGL() do { DDRC |= (1<<5); PINC |= (1<<5); } while (0) + + +void matrix_init_kb(void) { + LED_ON(); + _delay_ms(500); + LED_OFF(); + + matrix_init_user(); +}
\ No newline at end of file diff --git a/keyboards/alps64/alps64.h b/keyboards/alps64/alps64.h new file mode 100644 index 000000000..f265c3358 --- /dev/null +++ b/keyboards/alps64/alps64.h @@ -0,0 +1,40 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef ALPS64_H +#define ALPS64_H + +#include "quantum.h" + +/* Alps64 keymap definition macro */ +#define KEYMAP( \ + K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ + K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ + K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ + K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ + K30, K40, K50, K60, K70, K00, K10, K20 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \ +} + +#endif diff --git a/keyboards/alps64/config.h b/keyboards/alps64/config.h new file mode 100644 index 000000000..858a82ecd --- /dev/null +++ b/keyboards/alps64/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TMK +#define PRODUCT Alps64 +#define DESCRIPTION TMK keyboard firmware for Alps64 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, C2 } +#define UNUSED_PINS + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/alps64/keymaps/default/keymap.c b/keyboards/alps64/keymaps/default/keymap.c new file mode 100644 index 000000000..2c45dc7f3 --- /dev/null +++ b/keyboards/alps64/keymaps/default/keymap.c @@ -0,0 +1,12 @@ +#include "alps64.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + KEYMAP( \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,ESC, \ + LCTL,LGUI,LALT, SPC, APP, RALT,RGUI,RCTL), +}; +const uint16_t PROGMEM fn_actions[] = {}; diff --git a/keyboards/alps64/led.c b/keyboards/alps64/led.c new file mode 100644 index 000000000..d20c51aab --- /dev/null +++ b/keyboards/alps64/led.c @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + DDRC |= (1<<5); + PORTC |= (1<<5); + } else { + // Hi-Z + DDRC &= ~(1<<5); + PORTC &= ~(1<<5); + } +} diff --git a/keyboards/alps64/matrix.c b/keyboards/alps64/matrix.c new file mode 100644 index 000000000..b3508850d --- /dev/null +++ b/keyboards/alps64/matrix.c @@ -0,0 +1,199 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + //debug + debug_matrix = true; + LED_ON(); + _delay_ms(500); + LED_OFF(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_quantum(); + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 + * pin: B0 B1 B2 B3 B4 B5 B6 B7 + */ +static void init_cols(void) +{ + // Input with pull-up(DDR:0, PORT:1) + DDRB &= ~0b11111111; + PORTB |= 0b11111111; +} + +/* Returns status of switches(1:on, 0:off) */ +static matrix_row_t read_cols(void) +{ + // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1) + return ~PINB; +} + +/* Row pin configuration + * row: 0 1 2 3 4 5 6 7 + * pin: D0 D1 D2 D3 D4 D5 D6 C2 + */ +static void unselect_rows(void) +{ + // Hi-Z(DDR:0, PORT:0) to unselect + DDRD &= ~0b01111111; + PORTD &= ~0b01111111; + DDRC &= ~0b00000100; + PORTC &= ~0b00000100; +} + + +static void select_row(uint8_t row) +{ + // Output low(DDR:1, PORT:0) to select + switch (row) { + case 0: + DDRD |= (1<<0); + PORTD &= ~(1<<0); + break; + case 1: + DDRD |= (1<<1); + PORTD &= ~(1<<1); + break; + case 2: + DDRD |= (1<<2); + PORTD &= ~(1<<2); + break; + case 3: + DDRD |= (1<<3); + PORTD &= ~(1<<3); + break; + case 4: + DDRD |= (1<<4); + PORTD &= ~(1<<4); + break; + case 5: + DDRD |= (1<<5); + PORTD &= ~(1<<5); + break; + case 6: + DDRD |= (1<<6); + PORTD &= ~(1<<6); + break; + case 7: + DDRC |= (1<<2); + PORTC &= ~(1<<2); + break; + } +} diff --git a/keyboards/alps64/readme.md b/keyboards/alps64/readme.md new file mode 100644 index 000000000..1798b193a --- /dev/null +++ b/keyboards/alps64/readme.md @@ -0,0 +1,4 @@ +Alps64 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile new file mode 100644 index 000000000..09fcf3e7a --- /dev/null +++ b/keyboards/arrow_pad/Makefile @@ -0,0 +1,74 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/arrow_pad/arrow_pad.c b/keyboards/arrow_pad/arrow_pad.c new file mode 100644 index 000000000..381934aa8 --- /dev/null +++ b/keyboards/arrow_pad/arrow_pad.c @@ -0,0 +1 @@ +#include "arrow_pad.h"
\ No newline at end of file diff --git a/keyboards/arrow_pad/arrow_pad.h b/keyboards/arrow_pad/arrow_pad.h new file mode 100644 index 000000000..62882b9b5 --- /dev/null +++ b/keyboards/arrow_pad/arrow_pad.h @@ -0,0 +1,13 @@ +#ifndef ARROW_PAD_H +#define ARROW_PAD_H + +#include "quantum.h" +#include "matrix.h" +#include "keymap.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif +#include <avr/io.h> +#include <stddef.h> + +#endif diff --git a/keyboards/arrow_pad/config.h b/keyboards/arrow_pad/config.h new file mode 100644 index 000000000..3d8d8709a --- /dev/null +++ b/keyboards/arrow_pad/config.h @@ -0,0 +1,160 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x4096 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nobody +#define PRODUCT GoldPad +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/arrow_pad/keymaps/default/keymap.c b/keyboards/arrow_pad/keymaps/default/keymap.c new file mode 100644 index 000000000..5647f75af --- /dev/null +++ b/keyboards/arrow_pad/keymaps/default/keymap.c @@ -0,0 +1,163 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "arrow_pad.h" +#include "led.h" + +// This is the 21-key keypad to 2x11 element matrix mapping +#define KEYMAP( \ + KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ + KM_NUM, KM_FSL, KM_AST, KM_MIN, \ + KM___7, KM___8, KM___9, KM_EQU, \ + KM___4, KM___5, KM___6, KM_PLS, \ + KM___1, KM___2, KM___3, ___ENT, \ + KM___0, _____0, KM_DOT, KM_ENT \ +) { \ + { KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \ + { KM_NUM, KM_FSL, KM_AST, KM_MIN }, \ + { KM___7, KM___8, KM___9, KM_EQU }, \ + { KM___4, KM___5, KM___6, KM_PLS }, \ + { KM___1, KM___2, KM___3, KC_NO }, \ + { KM___0, KC_NO, KM_DOT, KM_ENT } \ +} + +#define LAYER_BASE 0 +#define LAYER_EDIT 1 +#define LAYER_FUNCTION 2 + +#define MACRO_COPY_CUT 0 +#define MACRO_SHIFT_CONTROL 1 +#define MACRO_CONTROL_ALT 2 + +#define M_COPY KC_FN5 +#define M_SHFCT KC_FN6 +#define M_CTALT KC_FN7 + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[LAYER_BASE] = KEYMAP( \ + KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PEQL, \ + KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_P1, KC_P2, KC_P3, XXXXXXX, \ + KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), + +[LAYER_EDIT] = KEYMAP( \ + KC_ESC, KC_TAB, KC_SPC, _______, \ + KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ + KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ + KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ + KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ + KC_BSPC, KC_PENT, KC_DEL, M_SHFCT), + +[LAYER_FUNCTION] = KEYMAP( \ + KC_FN2, KC_FN3, KC_FN4, _______, \ + KC_FN1, _______, _______, _______, \ + _______, _______, _______, _______, \ + _______, _______, _______, _______, \ + _______, _______, _______, XXXXXXX, \ + RESET, _______, _______, _______ ), + +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), + [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), + [2] = ACTION_BACKLIGHT_TOGGLE(), + [3] = ACTION_BACKLIGHT_INCREASE(), + [4] = ACTION_BACKLIGHT_DECREASE(), + [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), + [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), + [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), + +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + + case MACRO_COPY_CUT: + if (record->event.pressed) { + register_code(KC_LCTL); + if (record->tap.count == 1) { + register_code(KC_C); + unregister_code(KC_C); + } + else if (record->tap.count == 2) { + register_code(KC_X); + unregister_code(KC_X); + } + unregister_code(KC_LCTL); + } + break; + + case MACRO_SHIFT_CONTROL: + if (record->event.pressed) { + if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); + if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count == 3) register_code(KC_PENT);; + } + else { + unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); + unregister_code(KC_PENT); + } + break; + + case MACRO_CONTROL_ALT: + if (record->event.pressed) { + if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); + } + else { + unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); + } + break; + } + + return MACRO_NONE; +} + +void led_set_user(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + DDRD |= (1<<6); + PORTD |= (1<<6); + } else { + // Hi-Z + DDRD &= ~(1<<6); + PORTD &= ~(1<<6); + } + if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // output low + DDRC |= (1<<7); + PORTC |= ~(1<<7); + } else { + // Hi-Z + DDRC &= ~(1<<7); + PORTC &= ~(1<<7); + } +}
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_21/Makefile b/keyboards/arrow_pad/keymaps/pad_21/Makefile new file mode 100644 index 000000000..af51976a8 --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_21/Makefile @@ -0,0 +1,17 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_21/config.h b/keyboards/arrow_pad/keymaps/pad_21/config.h new file mode 100644 index 000000000..a095e8737 --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_21/config.h @@ -0,0 +1,158 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x4097 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nobody +#define PRODUCT Arrow Pad 21 +#define DESCRIPTION 21-Key QMK Assistant + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D3, D5 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/arrow_pad/keymaps/pad_21/keymap.c new file mode 100644 index 000000000..28917a5d9 --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_21/keymap.c @@ -0,0 +1,160 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "arrow_pad.h" +#include "led.h" + +// This is the 21-key keypad to 2x11 element matrix mapping +#define KEYMAP( \ + KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ + KM_NUM, KM_FSL, KM_AST, KM_MIN, \ + KM___7, KM___8, KM___9, ___PLS, \ + KM___4, KM___5, KM___6, KM_PLS, \ + KM___1, KM___2, KM___3, ___ENT, \ + KM___0, _____0, KM_DOT, KM_ENT \ +) { \ + { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \ + { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \ +} + + +#define LAYER_BASE 0 +#define LAYER_EDIT 1 +#define LAYER_FUNCTION 2 + +#define MACRO_COPY_CUT 0 +#define MACRO_SHIFT_CONTROL 1 +#define MACRO_CONTROL_ALT 2 + +#define M_COPY KC_FN5 +#define M_SHFCT KC_FN6 +#define M_CTALT KC_FN7 + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[LAYER_BASE] = KEYMAP( \ + KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, XXXXXXX, \ + KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_P1, KC_P2, KC_P3, XXXXXXX, \ + KC_P0, XXXXXXX, KC_PDOT, KC_PENT ), + +[LAYER_EDIT] = KEYMAP( \ + KC_ESC, KC_TAB, KC_SPC, _______, \ + KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ + KC_HOME, KC_UP, KC_PGUP, XXXXXXX, \ + KC_LEFT, M_COPY, KC_RGHT, M_CTALT, \ + KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ + KC_BSPC, XXXXXXX, KC_DEL, M_SHFCT), + +[LAYER_FUNCTION] = KEYMAP( \ + KC_FN2, KC_FN3, KC_FN4, _______, \ + KC_FN1, _______, _______, _______, \ + _______, _______, _______, XXXXXXX, \ + _______, _______, _______, _______, \ + _______, _______, _______, XXXXXXX, \ + RESET, XXXXXXX, _______, _______ ), + +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), + [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), + [2] = ACTION_BACKLIGHT_TOGGLE(), + [3] = ACTION_BACKLIGHT_INCREASE(), + [4] = ACTION_BACKLIGHT_DECREASE(), + [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), + [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), + [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), + +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + + case MACRO_COPY_CUT: + if (record->event.pressed) { + register_code(KC_LCTL); + if (record->tap.count == 1) { + register_code(KC_C); + unregister_code(KC_C); + } + else if (record->tap.count == 2) { + register_code(KC_X); + unregister_code(KC_X); + } + unregister_code(KC_LCTL); + } + break; + + case MACRO_SHIFT_CONTROL: + if (record->event.pressed) { + if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); + if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count == 3) register_code(KC_PENT);; + } + else { + unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); + unregister_code(KC_PENT); + } + break; + + case MACRO_CONTROL_ALT: + if (record->event.pressed) { + if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); + } + else { + unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); + } + break; + } + + return MACRO_NONE; +} + +void led_set_user(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + DDRD |= (1<<6); + PORTD |= (1<<6); + } else { + // Hi-Z + DDRD &= ~(1<<6); + PORTD &= ~(1<<6); + } + if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // output low + DDRC |= (1<<7); + PORTC |= ~(1<<7); + } else { + // Hi-Z + DDRC &= ~(1<<7); + PORTC &= ~(1<<7); + } +}
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_24/Makefile b/keyboards/arrow_pad/keymaps/pad_24/Makefile new file mode 100644 index 000000000..e31bfe1af --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_24/Makefile @@ -0,0 +1,17 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_24/config.h b/keyboards/arrow_pad/keymaps/pad_24/config.h new file mode 100644 index 000000000..e940acaa0 --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_24/config.h @@ -0,0 +1,160 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x4096 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nobody +#define PRODUCT Arrow Pad 24 +#define DESCRIPTION 24-Key QMK Assistant + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/arrow_pad/keymaps/pad_24/keymap.c new file mode 100644 index 000000000..5647f75af --- /dev/null +++ b/keyboards/arrow_pad/keymaps/pad_24/keymap.c @@ -0,0 +1,163 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "arrow_pad.h" +#include "led.h" + +// This is the 21-key keypad to 2x11 element matrix mapping +#define KEYMAP( \ + KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ + KM_NUM, KM_FSL, KM_AST, KM_MIN, \ + KM___7, KM___8, KM___9, KM_EQU, \ + KM___4, KM___5, KM___6, KM_PLS, \ + KM___1, KM___2, KM___3, ___ENT, \ + KM___0, _____0, KM_DOT, KM_ENT \ +) { \ + { KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \ + { KM_NUM, KM_FSL, KM_AST, KM_MIN }, \ + { KM___7, KM___8, KM___9, KM_EQU }, \ + { KM___4, KM___5, KM___6, KM_PLS }, \ + { KM___1, KM___2, KM___3, KC_NO }, \ + { KM___0, KC_NO, KM_DOT, KM_ENT } \ +} + +#define LAYER_BASE 0 +#define LAYER_EDIT 1 +#define LAYER_FUNCTION 2 + +#define MACRO_COPY_CUT 0 +#define MACRO_SHIFT_CONTROL 1 +#define MACRO_CONTROL_ALT 2 + +#define M_COPY KC_FN5 +#define M_SHFCT KC_FN6 +#define M_CTALT KC_FN7 + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[LAYER_BASE] = KEYMAP( \ + KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PEQL, \ + KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_P1, KC_P2, KC_P3, XXXXXXX, \ + KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), + +[LAYER_EDIT] = KEYMAP( \ + KC_ESC, KC_TAB, KC_SPC, _______, \ + KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ + KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ + KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ + KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ + KC_BSPC, KC_PENT, KC_DEL, M_SHFCT), + +[LAYER_FUNCTION] = KEYMAP( \ + KC_FN2, KC_FN3, KC_FN4, _______, \ + KC_FN1, _______, _______, _______, \ + _______, _______, _______, _______, \ + _______, _______, _______, _______, \ + _______, _______, _______, XXXXXXX, \ + RESET, _______, _______, _______ ), + +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), + [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), + [2] = ACTION_BACKLIGHT_TOGGLE(), + [3] = ACTION_BACKLIGHT_INCREASE(), + [4] = ACTION_BACKLIGHT_DECREASE(), + [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), + [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), + [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), + +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + + case MACRO_COPY_CUT: + if (record->event.pressed) { + register_code(KC_LCTL); + if (record->tap.count == 1) { + register_code(KC_C); + unregister_code(KC_C); + } + else if (record->tap.count == 2) { + register_code(KC_X); + unregister_code(KC_X); + } + unregister_code(KC_LCTL); + } + break; + + case MACRO_SHIFT_CONTROL: + if (record->event.pressed) { + if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); + if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count == 3) register_code(KC_PENT);; + } + else { + unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); + unregister_code(KC_PENT); + } + break; + + case MACRO_CONTROL_ALT: + if (record->event.pressed) { + if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); + if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); + } + else { + unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); + } + break; + } + + return MACRO_NONE; +} + +void led_set_user(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + DDRD |= (1<<6); + PORTD |= (1<<6); + } else { + // Hi-Z + DDRD &= ~(1<<6); + PORTD &= ~(1<<6); + } + if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // output low + DDRC |= (1<<7); + PORTC |= ~(1<<7); + } else { + // Hi-Z + DDRC &= ~(1<<7); + PORTC &= ~(1<<7); + } +}
\ No newline at end of file diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md new file mode 100644 index 000000000..5aa44cce5 --- /dev/null +++ b/keyboards/arrow_pad/readme.md @@ -0,0 +1,24 @@ +arrow_pad keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/atomic/Makefile b/keyboards/atomic/Makefile new file mode 100644 index 000000000..08e9205cb --- /dev/null +++ b/keyboards/atomic/Makefile @@ -0,0 +1,73 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/atomic/atomic.c b/keyboards/atomic/atomic.c new file mode 100644 index 000000000..6f393315e --- /dev/null +++ b/keyboards/atomic/atomic.c @@ -0,0 +1,15 @@ +#include "atomic.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); + + // Turn status LED on + DDRE |= (1<<6); + PORTE |= (1<<6); + + matrix_init_user(); +}
\ No newline at end of file diff --git a/keyboards/atomic/atomic.h b/keyboards/atomic/atomic.h new file mode 100644 index 000000000..88e11fadf --- /dev/null +++ b/keyboards/atomic/atomic.h @@ -0,0 +1,27 @@ +#ifndef ATOMIC_H +#define ATOMIC_H + +#include "quantum.h" +#include <stddef.h> +#include <avr/io.h> +#include <avr/interrupt.h> + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP_SEMI_STANDARD( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D, K3E }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/atomic/config.h b/keyboards/atomic/config.h new file mode 100644 index 000000000..9c40f54e7 --- /dev/null +++ b/keyboards/atomic/config.h @@ -0,0 +1,160 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Atomic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D5, B5, B6, C6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atomic/keymaps/abienz.c b/keyboards/atomic/keymaps/abienz.c new file mode 100644 index 000000000..589a64dc4 --- /dev/null +++ b/keyboards/atomic/keymaps/abienz.c @@ -0,0 +1,36 @@ +#include "atomic.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Colemak */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO }, + { KC_TAB, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_BSPC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT, KC_ENT, KC_NO, KC_PGUP }, + { KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, KC_RSFT, KC_NO, KC_UP, KC_PGDN }, + { KC_LCTL, KC_LGUI, KC_NO, KC_LALT, FUNC(1), KC_SPC, KC_NO, KC_RALT, FUNC(2), KC_RGUI, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, + }, + [1] = { /* function */ + { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_NO }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_SLEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MPLY }, + { KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, FUNC(1), KC_TRNS, KC_NO, KC_TRNS, FUNC(2), KC_TRNS, KC_NO, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT }, + } +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), + [2] = ACTION_LAYER_MOMENTARY(1), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return MACRODOWN(TYPE(KC_T), END); + break; + } + return MACRO_NONE; +}; + diff --git a/keyboards/atomic/keymaps/default/keymap.c b/keyboards/atomic/keymaps/default/keymap.c new file mode 100644 index 000000000..0ede363a1 --- /dev/null +++ b/keyboards/atomic/keymaps/default/keymap.c @@ -0,0 +1,234 @@ +#include "atomic.h" + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define ___T___ KC_TRNS +#define XXXXXXX KC_NO + +// Layer shorthand +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _LW 3 +#define _RS 4 +#define _FN 5 + +/* ROW 1 OPTIONS + * .--------------------------------------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + * .- 2u ------------. + * | KEY . XXXXXX | + * '-----------------' + */ + +/* ROW 2 OPTIONS + * .--------------------------------------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + * .- 2u ------------. .- 2u ------------. + * | KEY . XXXXXX | | KEY . XXXXXX | + * '-----------------' '-----------------' + */ + +/* ROW 3 OPTIONS + * .--------------------------------------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + * .- 2u ------------. .- 2u ------------. + * | KEY . XXXXXX | | X | + * '-----------------' '-----------------' + * .- 2u ------------. + * | X | + * '-----------------' + */ + +/* ROW 4 OPTIONS + * .--------------------------------------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + * .- 2u ------------. + * | KEY . XXXXXX | + * '-----------------' + * .- 2u ------------. .- 2u ------------. + * | KEY . XXXXXX | | KEY . XXXXXX | + * '-----------------' '-----------------' + * .- 2u ------------. + * | KEY . XXXXXX | + * '-----------------' + */ + +/* ROW 5 OPTIONS + * .--------------------------------------------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + * .- 1.25u --+ 1.25u ------- 1.25u +--- 1.25u --- 2u -------------- 1.25u ---- 1.25u ------ 1.25u +---- 1.25u . + * | X | X | X | X | X | X | X | X | X | + * '-----------------------------------------------------------------------------------------------------------' + * .- 2u ------------. + * | X | + * '-----------------' + * .--------------------- 6.25u ----------------------------. + * | X | + * '--------------------------------------------------------' + * .----------------------- 6.25u ---------------------------- 1.25u ---- 1.25u ---- 1.25u ------ 1.25u +-- 1.25u --. + * | X | X | X | X | X | X | + * '----------------------------------------------------------------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_QW] = { /* QWERTY */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* COLEMAK - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_CM] = { /* COLEMAK */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* DVORAK - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | ' | , | . | P | Y | F | G | C | R | L | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | ESC | A | O | E | U | I | D | H | T | N | S | / | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_DV] = { /* DVORAK */ + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* LOWERED + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | XXXXXX . | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | XXXXXX . | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_LW] = { /* LOWERED */ + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, _______, KC_INS }, + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, ___T___, ___T___, _______ }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, + +/* RAISED + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | XXXXXX . | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | XXXXXX . | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_RS] = { /* RAISED */ + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, KC_INS }, + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, ___T___, ___T___, _______ }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, + +/* FUNCTION + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | | QWERTY | COLEMK | DVORAK | | | | | | | XXXXXX . | MOUS U | WHEEL- | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | XXXXXX . MS BT1 | | | | | | MOUS L | MOUS D | MOUS R | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_FN] = { /* FUNCTION */ + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { _______, _______, DF(_QW), DF(_CM), DF(_DV), _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atomic/keymaps/michelle.c b/keyboards/atomic/keymaps/michelle.c new file mode 100644 index 000000000..2364c46a1 --- /dev/null +++ b/keyboards/atomic/keymaps/michelle.c @@ -0,0 +1,183 @@ +#include "atomic.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Dvorak */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_NO }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_INS, KC_DEL }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ + { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_NO, KC_PGUP }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_NO, KC_UP, KC_PGDN }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LCTL, MO(1), KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, MO(2), KC_LEFT, KC_DOWN, KC_RGHT }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ +// │ X │ X │ X │ X │ X │ X │ X │ X │ X │ +// └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌───────────────────── 6.25u ────────────────────────────┐ +// │ X │ +// └────────────────────────────────────────────────────────┘ +// ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ +// │ X │ X │ X │ X │ X │ X │ +// └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ + }, + [1] = { /* Qwerty + F keys */ + { KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_NO }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_INS, KC_DEL }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ + { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_NO, KC_PGUP }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP, KC_PGDN }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LCTL, KC_TRNS, KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ +// │ X │ X │ X │ X │ X │ X │ X │ X │ X │ +// └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌───────────────────── 6.25u ────────────────────────────┐ +// │ X │ +// └────────────────────────────────────────────────────────┘ +// ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ +// │ X │ X │ X │ X │ X │ X │ +// └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ + }, + [2] = { /* Numpad + qwerty shortcut keys */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_NO }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_P4, KC_P5, KC_P6, KC_L, KC_SLSH, KC_EQL, KC_INS, KC_DEL }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ + { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_P1, KC_P2, KC_P3, KC_S, KC_MINS, KC_ENT, KC_NO, KC_PGUP }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_X, KC_B, KC_P0, KC_P0, KC_PENT, KC_Z, KC_RSFT, KC_NO, KC_UP, KC_PGDN }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ +// │ X │ │ X │ +// └─────────────────┘ └─────────────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ + { KC_LCTL, KC_TRNS, KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }, +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ +// │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +// └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ +// ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ +// │ X │ X │ X │ X │ X │ X │ X │ X │ X │ +// └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ +// ┌─ 2u ────────────┐ +// │ X │ +// └─────────────────┘ +// ┌───────────────────── 6.25u ────────────────────────────┐ +// │ X │ +// └────────────────────────────────────────────────────────┘ +// ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ +// │ X │ X │ X │ X │ X │ X │ +// └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ + }, +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + return MACRODOWN(TYPE(KC_T), END); + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atomic/keymaps/pvc/Makefile b/keyboards/atomic/keymaps/pvc/Makefile new file mode 100644 index 000000000..278407e6c --- /dev/null +++ b/keyboards/atomic/keymaps/pvc/Makefile @@ -0,0 +1,15 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h new file mode 100644 index 000000000..70353323b --- /dev/null +++ b/keyboards/atomic/keymaps/pvc/config.h @@ -0,0 +1,169 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0419 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Atomic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D5, B5, B6, B3 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// Enable Keyboard Locking via magic key +#define KEYBOARD_LOCK_ENABLE + + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +//#define VIBRATO_ENABLE +//#define VIBRATO_STRENGTH_ENABLE + +#endif diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c new file mode 100644 index 000000000..f16ec8a6e --- /dev/null +++ b/keyboards/atomic/keymaps/pvc/keymap.c @@ -0,0 +1,578 @@ +#include "atomic.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "led.h" + +#ifdef AUDIO_ENABLE + #include "audio.h" + #include "song_list.h" +#endif + +#define LAYER_QWERTY 0 +#define LAYER_COLEMAK 1 +#define LAYER_DVORAK 2 +#define LAYER_UPPER 3 +#define LAYER_LOWER 4 +#define LAYER_FUNCTION 5 +#define LAYER_MOUSE 6 +#define LAYER_ADJUST 7 + +#define MACRO_QWERTY 0 +#define MACRO_COLEMAK 1 +#define MACRO_DVORAK 2 +#define MACRO_UPPER 3 +#define MACRO_LOWER 4 +#define MACRO_FUNCTION 5 +#define MACRO_MOUSE 6 +#define MACRO_TIMBRE_1 7 +#define MACRO_TIMBRE_2 8 +#define MACRO_TIMBRE_3 9 +#define MACRO_TIMBRE_4 10 +#define MACRO_TEMPO_U 11 +#define MACRO_TEMPO_D 12 +#define MACRO_TONE_DEFAULT 13 +#define MACRO_MUSIC_TOGGLE 14 +#define MACRO_AUDIO_TOGGLE 16 +#define MACRO_INC_VOICE 18 +#define MACRO_DEC_VOICE 19 +#define MACRO_BACKLIGHT 20 +#define MACRO_BREATH_TOGGLE 21 +#define MACRO_BREATH_SPEED_INC 23 +#define MACRO_BREATH_SPEED_DEC 24 +#define MACRO_BREATH_DEFAULT 25 + +#define M_QWRTY M(MACRO_QWERTY) +#define M_COLMK M(MACRO_COLEMAK) +#define M_DVORK M(MACRO_DVORAK) +#define M_UPPER M(MACRO_UPPER) +#define M_LOWER M(MACRO_LOWER) +#define M_FUNCT M(MACRO_FUNCTION) +#define M_MOUSE M(MACRO_MOUSE) +#define TIMBR_1 M(MACRO_TIMBRE_1) +#define TIMBR_2 M(MACRO_TIMBRE_2) +#define TIMBR_3 M(MACRO_TIMBRE_3) +#define TIMBR_4 M(MACRO_TIMBRE_4) +#define TMPO_UP M(MACRO_TEMPO_U) +#define TMPO_DN M(MACRO_TEMPO_D) +#define TMPO_DF M(MACRO_TONE_DEFAULT) +#define M_BACKL M(MACRO_BACKLIGHT) +#define M_BRTOG M(MACRO_BREATH_TOGGLE) +#define M_BSPDU M(MACRO_BREATH_SPEED_INC) +#define M_BSPDD M(MACRO_BREATH_SPEED_DEC) +#define M_BDFLT M(MACRO_BREATH_DEFAULT) + + +#define VC_UP M(MACRO_INC_VOICE) +#define VC_DOWN M(MACRO_DEC_VOICE) + + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define OS_SHFT KC_FN0 + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define ________________ _______, _______ +#define XXXXXXXXXXXXXXXX XXXXXXX, XXXXXXX + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [LAYER_QWERTY] = { // QWERTY + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, + }, + + /* COLEMAK + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | BACKSP | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [LAYER_COLEMAK] = { // COLEMAK + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, +}, + +/* DVORAK + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | ' | , | . | P | Y | F | G | C | R | L | / | = | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAPS | A | O | E | U | I | D | H | T | N | S | - | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | XXXXXX . SPACE | LOWER | SHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [LAYER_DVORAK] = { // DVORAK + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL }, + { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* UPPER + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | PRINT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | / | * | | NUM LK | SCR LK | XXXXXX . PAUSE | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | F1 | F2 | F3 | F4 | | | 7 | 8 | 9 | - | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | F5 | F6 | F7 | F8 | | | 4 | 5 | 6 | + | | XXXXXX . | HOME | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | F9 | F10 | F11 | F12 | | | 1 | 2 | 3 | ENTER | XXXXXX . | | END | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | 0 | | RALT | . | ENTER | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [LAYER_UPPER] = { // UPPER + { KC_PSCR, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PAUS }, + { _______, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS }, + { KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, ________________, KC_HOME }, + { _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, ________________, _______, KC_END }, + { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______ }, + }, + +/* LOWER + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | $ | { | [ | ( | % | # | ) | ] | } | @ | | | | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | | ^ | * | + | - | ; | : | _ | ' | " | ` | | XXXXXX . | HOME | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | | | | & | ! | ~ | / | \ | = | < | > | ? | XXXXXX . | | END | + * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| + * | | | | | | | | | | | | | | | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [LAYER_LOWER] = { // LOWER + { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ________________ }, + { _______, KC_DLR, KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT, _______, _______, _______, KC_INS }, + { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT, KC_GRV, _______, ________________, KC_HOME }, + { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL, KC_LT, KC_GT, KC_QUES, ________________, _______, KC_END }, + { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, + + [LAYER_FUNCTION] = { // FUNCTION + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ________________ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______, KC_PAUS }, + { KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_PSCR }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_VOLU, KC_MUTE }, + { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT }, + }, + +#ifdef MOUSEKEY_ENABLE + + [LAYER_MOUSE] = { // MOUSE + { _______, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, KC_WH_U }, + { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, + }, + +#endif + + [LAYER_ADJUST] = { // ADJUST + { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, _______, MU_TOG, AU_TOG, ________________ }, + { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, + { _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, _______, ________________, MUV_IN, _______ }, + { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, MUV_DE, _______ }, + }, + + +/* + [LAYER_EMPTY] = { // LAYER + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______, _______ }, + { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______ }, + }, +*/ + +}; + +#ifdef AUDIO_ENABLE + +float tone_my_startup[][2] = SONG(ODE_TO_JOY); +float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE); +float tone_music_on[][2] = SONG(DOE_A_DEER); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); +float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND); +float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND); +float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND); + +#endif /* AUDIO_ENABLE */ + +void persistant_default_layer_set(uint16_t default_layer) +{ + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_ONESHOT(MOD_LSFT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + + // MACRODOWN only works in this function + switch(id) + { + + case MACRO_BREATH_TOGGLE: + if (record->event.pressed) + { + breathing_toggle(); + } + break; + + case MACRO_BREATH_SPEED_INC: + if (record->event.pressed) + { + breathing_speed_inc(1); + } + break; + + case MACRO_BREATH_SPEED_DEC: + if (record->event.pressed) + { + breathing_speed_dec(1); + } + break; + + case MACRO_BREATH_DEFAULT: + if (record->event.pressed) + { + breathing_defaults(); + } + break; + + case MACRO_QWERTY: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_QWERTY); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_COLEMAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_COLEMAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_DVORAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_DVORAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_UPPER: + if (record->event.pressed) + { + layer_on(LAYER_UPPER); + breathing_speed_set(2); + breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_UPPER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_LOWER: + if (record->event.pressed) + { + layer_on(LAYER_LOWER); + breathing_speed_set(2); + breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_LOWER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_FUNCTION: + if (record->event.pressed) + { + breathing_speed_set(3); + breathing_enable(); + layer_on(LAYER_FUNCTION); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(LAYER_FUNCTION); + } + break; + +#ifdef MOUSEKEY_ENABLE + + case MACRO_MOUSE: + if (record->event.pressed) + { + layer_invert(LAYER_MOUSE); + } + break; + +#endif /* MOUSEKEY_ENABLE */ + +#ifdef AUDIO_ENABLE + + case MACRO_TIMBRE_1: + if (record->event.pressed) set_timbre(TIMBRE_12); + break; + + case MACRO_TIMBRE_2: + if (record->event.pressed) set_timbre(TIMBRE_25); + break; + + case MACRO_TIMBRE_3: + if (record->event.pressed) set_timbre(TIMBRE_50); + break; + + case MACRO_TIMBRE_4: + if (record->event.pressed) set_timbre(TIMBRE_75); + break; + + case MACRO_TEMPO_U: + if (record->event.pressed) increase_tempo(10); + break; + + case MACRO_TEMPO_D: + if (record->event.pressed) decrease_tempo(10); + break; + + case MACRO_TONE_DEFAULT: + if (record->event.pressed) + { + set_timbre(TIMBRE_DEFAULT); + set_tempo(TEMPO_DEFAULT); + } + break; + +/* + case MACRO_AUDIO_TOGGLE: + if (record->event.pressed) + { + if (is_audio_on()) + { + audio_off(); + } + else + { + audio_on(); + PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO); + } + } + break; + + case MACRO_MUSIC_TOGGLE: + if (record->event.pressed) + { + if (IS_LAYER_ON(LAYER_MUSIC)) + { + layer_off(LAYER_MUSIC); + stop_all_notes(); + } + else + { + PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO); + layer_on(LAYER_MUSIC); + } + } + break; + case MACRO_INC_VOICE: + if (record->event.pressed) + { + #ifdef AUDIO_ENABLE + voice_iterate(); + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); + #endif + } + break; + + case MACRO_DEC_VOICE: + if (record->event.pressed) + { + #ifdef AUDIO_ENABLE + voice_deiterate(); + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); + #endif + } + break; +*/ + +#endif /* AUDIO_ENABLE */ + +#ifdef BACKLIGHT_ENABLE + case MACRO_BACKLIGHT: + if (record->event.pressed) + { + backlight_step(); + } +#endif + + default: + break; + + } + return MACRO_NONE; +}; + + +#ifdef AUDIO_ENABLE + +void matrix_init_user(void) +{ + set_voice(default_voice); + startup_user(); + println("Matrix Init"); +} + +void led_set_user(uint8_t usb_led) +{ + static uint8_t old_usb_led = 0; + + _delay_ms(10); // gets rid of tick + + if (!is_playing_notes()) + { + if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning on... + PLAY_NOTE_ARRAY(tone_caps_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning off... + PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LK LED is turning on... + PLAY_NOTE_ARRAY(tone_numlk_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LED is turning off... + PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LK LED is turning on... + PLAY_NOTE_ARRAY(tone_scroll_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LED is turning off... + PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO); + } + } + + old_usb_led = usb_led; +} + + +void startup_user() +{ + _delay_ms(10); // gets rid of tick + PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO); + _delay_ms(2000); + stop_all_notes(); +} + +void audio_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO); +} + +void music_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); +} + +#endif /* AUDIO_ENABLE */
\ No newline at end of file diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md new file mode 100644 index 000000000..ab1e7ba1f --- /dev/null +++ b/keyboards/atomic/readme.md @@ -0,0 +1,25 @@ +Atomic keyboard firmware +====================== +DIY/Assembled ortholinear 60% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/atomic folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile new file mode 100644 index 000000000..95ee1d4d7 --- /dev/null +++ b/keyboards/atreus/Makefile @@ -0,0 +1,88 @@ + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +ifndef QUANTUM_DIR + include ../../Makefile +endif + +USB ?= /dev/cu.usbmodem1411 + +upload: build + $(ATRUES_UPLOAD_COMMAND) +
\ No newline at end of file diff --git a/keyboards/atreus/atreus.c b/keyboards/atreus/atreus.c new file mode 100644 index 000000000..263ec8732 --- /dev/null +++ b/keyboards/atreus/atreus.c @@ -0,0 +1 @@ +#include "atreus.h"
\ No newline at end of file diff --git a/keyboards/atreus/atreus.h b/keyboards/atreus/atreus.h new file mode 100644 index 000000000..f841c3519 --- /dev/null +++ b/keyboards/atreus/atreus.h @@ -0,0 +1,25 @@ +#ifndef ATREUS_H +#define ATREUS_H + +#include "quantum.h" +#include "matrix.h" +#include "backlight.h" +#include <stddef.h> + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k35, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b } \ +} + +#endif diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h new file mode 100644 index 000000000..624d90188 --- /dev/null +++ b/keyboards/atreus/config.h @@ -0,0 +1,88 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Technomancy +#define PRODUCT Atreus +#define DESCRIPTION q.m.k. keyboard firmware for Atreus + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#if defined(ATREUS_ASTAR) +# define MATRIX_ROW_PINS { D0, D1, D3, D2 } +# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } +# define UNUSED_PINS +#elif defined(ATREUS_TEENSY2) +# define MATRIX_ROW_PINS { D0, D1, D2, D3 } +# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } +# define UNUSED_PINS +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c new file mode 100644 index 000000000..1c4280ff5 --- /dev/null +++ b/keyboards/atreus/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _RS 1 +#define _LW 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN }, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH }, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT } +}, +[_RS] = { /* [> RAISE <] */ + {KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR}, + {KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS}, + {KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_LALT, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS}, + {TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL} +}, +[_LW] = { /* [> LOWER <] */ + {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10}, + {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET} +}}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/gerb/keymap.c b/keyboards/atreus/keymaps/gerb/keymap.c new file mode 100644 index 000000000..1ba3942e3 --- /dev/null +++ b/keyboards/atreus/keymaps/gerb/keymap.c @@ -0,0 +1,66 @@ +// This is the personal keymap of Chris Gerber (@gerbercj). I haven't worked out the kinks +// with the Colemak and Dvorak support yet, but everything else works nicely. + +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _L1 3 +#define _L2 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT } + }, + [_CM] = { /* Colemak */ + {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT } + }, + [_DV] = { /* Dvorak */ + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, + {KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LALT, KC_B, KC_M, KC_W, KC_V, KC_Z }, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_ENT } + }, + [_L1] = { /* LAYER 1 */ + {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_VOLU, KC_7, KC_8, KC_9, KC_LBRC}, + {KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_VOLD, KC_4, KC_5, KC_6, KC_RBRC}, + {KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, KC_MINS, KC_LALT, KC_MUTE, KC_1, KC_2, KC_3, KC_BSLS}, + {TG(_L2), KC_APP, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL } + }, + [_L2] = { /* LAYER 2 */ + {KC_TRNS, KC_WH_L, KC_MS_U, KC_WH_R, KC_WH_U, KC_NO, DF(_QW), KC_F7, KC_F8, KC_F9, KC_F10 }, + {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_NO, DF(_CM), KC_F6, KC_F5, KC_F6, KC_F11 }, + {KC_BTN4, KC_BTN1, KC_BTN2, KC_BTN3, KC_BTN4, KC_LALT, DF(_DV), KC_F1, KC_F2, KC_F3, KC_F12 }, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md new file mode 100644 index 000000000..734f58f0f --- /dev/null +++ b/keyboards/atreus/readme.md @@ -0,0 +1,186 @@ +atreus keyboard firmware +====================== + +## Quantum MK Firmware + +You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. + + BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + MIDI_ENABLE = yes # MIDI controls + # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // + BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + +## Atreus specific information + +These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands. + +If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use. + +## Quick aliases to common actions + +Your keymap can include shortcuts to common operations (called "function actions" in tmk). + +### Switching and toggling layers + +`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. + +`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). + +`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. + +### Fun with modifier keys + +* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias +* `RSFT(kc)` - applies right Shift to *kc* +* `LCTL(kc)` - applies left Control to *kc* +* `RCTL(kc)` - applies right Control to *kc* +* `LALT(kc)` - applies left Alt to *kc* +* `RALT(kc)` - applies right Alt to *kc* +* `LGUI(kc)` - applies left GUI (command/win) to *kc* +* `RGUI(kc)` - applies right GUI (command/win) to *kc* + +You can also chain these, like this: + + LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. + +The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. + + KC_TILD ~ + KC_EXLM ! + KC_AT @ + KC_HASH # + KC_DLR $ + KC_PERC % + KC_CIRC ^ + KC_AMPR & + KC_ASTR * + KC_LPRN ( + KC_RPRN ) + KC_UNDS _ + KC_PLUS + + KC_LCBR { + KC_RCBR } + KC_PIPE | + KC_COLN : + +`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. + +These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): + + * MOD_LCTL + * MOD_LSFT + * MOD_LALT + * MOD_LGUI + +These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. + +We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: + + * `CTL_T(kc)` - is LCTL when held and *kc* when tapped + * `SFT_T(kc)` - is LSFT when held and *kc* when tapped + * `ALT_T(kc)` - is LALT when held and *kc* when tapped + * `GUI_T(kc)` - is LGUI when held and *kc* when tapped + * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) + +### Temporarily setting the default layer + +`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. + +### Remember: These are just aliases + +These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). + +Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. + +## Macro shortcuts: Send a whole string when pressing just one key + +Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). + +```c +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. +{ + switch(id) { + case 0: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes + } + break; + } + return MACRO_NONE; +}; +``` +A macro can include the following commands: + +* I() change interval of stroke in milliseconds. +* D() press key. +* U() release key. +* T() type key(press and release). +* W() wait (milliseconds). +* END end mark. + +So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. + +Note: Using macros to have your keyboard send passwords for you is a bad idea. + +### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) + +Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: + + #include "keymap_<layout>.h" + +Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: + + * `CM_*` for all of the Colemak-equivalent characters + * `DV_*` for all of the Dvorak-equivalent characters + +These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. + +To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. + +## Additional language support + +In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). + +## Unicode support + +You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. + +## Other firmware shortcut keycodes + +* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) +* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things +* `BL_ON` - turns the backlight on +* `BL_OFF` - turns the backlight off +* `BL_<n>` - sets the backlight to level *n* +* `BL_INC` - increments the backlight level by one +* `BL_DEC` - decrements the backlight level by one +* `BL_TOGG` - toggles the backlight +* `BL_STEP` - steps through the backlight levels + +Enable the backlight from the Makefile. + +## MIDI functionalty + +This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. + +## Bluetooth functionality + +This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/bantam44/Makefile b/keyboards/bantam44/Makefile new file mode 100644 index 000000000..03893dbf8 --- /dev/null +++ b/keyboards/bantam44/Makefile @@ -0,0 +1,72 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif + diff --git a/keyboards/bantam44/bantam44.c b/keyboards/bantam44/bantam44.c new file mode 100644 index 000000000..f995308ae --- /dev/null +++ b/keyboards/bantam44/bantam44.c @@ -0,0 +1 @@ +#include "bantam44.h"
\ No newline at end of file diff --git a/keyboards/bantam44/bantam44.h b/keyboards/bantam44/bantam44.h new file mode 100644 index 000000000..3c0117434 --- /dev/null +++ b/keyboards/bantam44/bantam44.h @@ -0,0 +1,23 @@ +#ifndef BANTAM44_H +#define BANTAM44_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, K2A }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37, K38 }, \ +} + +#endif diff --git a/keyboards/bantam44/config.h b/keyboards/bantam44/config.h new file mode 100644 index 000000000..a55f62999 --- /dev/null +++ b/keyboards/bantam44/config.h @@ -0,0 +1,82 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bantam Keyboards +#define PRODUCT Bantam44 +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#define MATRIX_ROW_PINS { F0, D6, D4, D5 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/bantam44/keymaps/default/keymap.c b/keyboards/bantam44/keymaps/default/keymap.c new file mode 100644 index 000000000..ed795eee1 --- /dev/null +++ b/keyboards/bantam44/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +#include "bantam44.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Base */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, MO(1), KC_NO, KC_SPC, KC_NO, MO(2), KC_SCLN, KC_QUOT, KC_SLSH } + }, + [1] = { /* LOWER */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT }, + {KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_END, KC_PGDN, KC_EXLM } + }, + [2] = { /* RAISE */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT }, + {KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO, KC_ENT }, + {KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT } + } +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function +{ + return MACRO_NONE; +};
\ No newline at end of file diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md new file mode 100644 index 000000000..89d7f9d05 --- /dev/null +++ b/keyboards/bantam44/readme.md @@ -0,0 +1,24 @@ +Bantam44 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile new file mode 100644 index 000000000..d9f2b8b83 --- /dev/null +++ b/keyboards/chibios_test/Makefile @@ -0,0 +1,14 @@ +SUBPROJECT_DEFAULT = stm32_f072_onekey + +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c new file mode 100644 index 000000000..31319ef57 --- /dev/null +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c @@ -0,0 +1,49 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+ {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+ {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+ {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+ {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+ {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h new file mode 100644 index 000000000..7253e7782 --- /dev/null +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h @@ -0,0 +1,166 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOC_LED 13
+#define GPIOD_OSC_IN 0
+#define GPIOD_OSC_OUT 1
+
+/* In case your board has a "USB enable" hardware
+ controlled by a pin, define it here. (It could be just
+ a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC 10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2 - Alternate output (USART2 TX).
+ * PA3 - Normal input (USART2 RX).
+ * PA9 - Alternate output (USART1 TX).
+ * PA10 - Normal input (USART1 RX).
+ */
+#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10 - Push Pull output (USB switch).
+ */
+#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13 - Push Pull output (LED).
+ */
+#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0 - Normal input (XTAL).
+ * PD1 - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+ have a 1.5k resistor connected on one end to the D+ line
+ and on the other end to some pin. Or even a slightly more
+ complicated "USB enable" circuit, controlled by a pin.
+ That should go here.
+
+ However on some boards (e.g. one that I have), there's no
+ such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk new file mode 100644 index 000000000..d692c0ee4 --- /dev/null +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png Binary files differnew file mode 100644 index 000000000..c44a7d9eb --- /dev/null +++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png diff --git a/keyboards/chibios_test/boards/maple_mini_mapping.png b/keyboards/chibios_test/boards/maple_mini_mapping.png Binary files differnew file mode 100644 index 000000000..12cfa81db --- /dev/null +++ b/keyboards/chibios_test/boards/maple_mini_mapping.png diff --git a/keyboards/chibios_test/chibios_test.c b/keyboards/chibios_test/chibios_test.c new file mode 100644 index 000000000..efe2d4a5d --- /dev/null +++ b/keyboards/chibios_test/chibios_test.c @@ -0,0 +1 @@ +#include "chibios_test.h" diff --git a/keyboards/chibios_test/chibios_test.h b/keyboards/chibios_test/chibios_test.h new file mode 100644 index 000000000..25b031771 --- /dev/null +++ b/keyboards/chibios_test/chibios_test.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ +#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ + +#include "quantum.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */ diff --git a/keyboards/chibios_test/config.h b/keyboards/chibios_test/config.h new file mode 100644 index 000000000..c32a77b37 --- /dev/null +++ b/keyboards/chibios_test/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER "QMK" +#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' +#define PRODUCT "ChibiOS QMK test" +#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' +#define DESCRIPTION "QMK keyboard firmware test for ChibiOS" + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 1 +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/chibios_test/keymaps/default/keymap.c b/keyboards/chibios_test/keymaps/default/keymap.c new file mode 100644 index 000000000..a362e2ccf --- /dev/null +++ b/keyboards/chibios_test/keymaps/default/keymap.c @@ -0,0 +1,25 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "chibios_test.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + {{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET +}; + +const uint16_t fn_actions[] = { +}; diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld new file mode 100644 index 000000000..fb141f888 --- /dev/null +++ b/keyboards/chibios_test/ld/MKL26Z64.ld @@ -0,0 +1,105 @@ +/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+ flash0 : org = 0x00000000, len = 0x100
+ flash1 : org = 0x00000400, len = 0x10
+ flash2 : org = 0x00000410, len = 62k - 0x410
+ flash3 : org = 0x0000F800, len = 2k
+ flash4 : org = 0x00000000, len = 0
+ flash5 : org = 0x00000000, len = 0
+ flash6 : org = 0x00000000, len = 0
+ flash7 : org = 0x00000000, len = 0
+ ram0 : org = 0x1FFFF800, len = 8k
+ ram1 : org = 0x00000000, len = 0
+ ram2 : org = 0x00000000, len = 0
+ ram3 : org = 0x00000000, len = 0
+ ram4 : org = 0x00000000, len = 0
+ ram5 : org = 0x00000000, len = 0
+ ram6 : org = 0x00000000, len = 0
+ ram7 : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+ .cfmprotect : ALIGN(4) SUBALIGN(4)
+ {
+ KEEP(*(.cfmconfig))
+ } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__ = LENGTH(flash3);
+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld new file mode 100644 index 000000000..00613328e --- /dev/null +++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld @@ -0,0 +1,88 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * #define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+ flash0 : org = 0x08002000, len = 128k - 0x2000
+ flash1 : org = 0x00000000, len = 0
+ flash2 : org = 0x00000000, len = 0
+ flash3 : org = 0x00000000, len = 0
+ flash4 : org = 0x00000000, len = 0
+ flash5 : org = 0x00000000, len = 0
+ flash6 : org = 0x00000000, len = 0
+ flash7 : org = 0x00000000, len = 0
+ ram0 : org = 0x20000000, len = 20k
+ ram1 : org = 0x00000000, len = 0
+ ram2 : org = 0x00000000, len = 0
+ ram3 : org = 0x00000000, len = 0
+ ram4 : org = 0x00000000, len = 0
+ ram5 : org = 0x00000000, len = 0
+ ram6 : org = 0x00000000, len = 0
+ ram7 : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile new file mode 100644 index 000000000..eae38c4b2 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile @@ -0,0 +1,41 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F0xx +# linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F072xB +# startup code to use +# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f0xx +# it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = ST_STM32F072B_DISCOVERY +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m0 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + +# Build Options +# comment out to disable the options. +# +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h new file mode 100644 index 000000000..02c48c4e6 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here (page 175): + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f072_onekey/chconf.h b/keyboards/chibios_test/stm32_f072_onekey/chconf.h new file mode 100644 index 000000000..99fa8ce39 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE FALSE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP FALSE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS FALSE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/config.h b/keyboards/chibios_test/stm32_f072_onekey/config.h new file mode 100644 index 000000000..bbaf0dc4b --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/config.h @@ -0,0 +1,7 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ + +#include "../config.h" + + +#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/halconf.h b/keyboards/chibios_test/stm32_f072_onekey/halconf.h new file mode 100644 index 000000000..1a450d632 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/led.c b/keyboards/chibios_test/stm32_f072_onekey/led.c new file mode 100644 index 000000000..18edb8ba8 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/led.c @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + (void)usb_led; + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOC, GPIOC_LED_GREEN); + } else { + // Hi-Z + palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_INPUT); + } +} diff --git a/keyboards/chibios_test/stm32_f072_onekey/matrix.c b/keyboards/chibios_test/stm32_f072_onekey/matrix.c new file mode 100644 index 000000000..a05b38cd4 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/matrix.c @@ -0,0 +1,163 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * scan matrix + */ +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "wait.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0) +#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0) +#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0) + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + //debug + debug_matrix = true; + LED_ON(); + wait_ms(500); + LED_OFF(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + wait_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +/* Column pin configuration + */ +static void init_cols(void) +{ + // don't need pullup/down, since it's pulled down in hardware + palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT); +} + +/* Returns status of switches(1:on, 0:off) */ +static matrix_row_t read_cols(void) +{ + return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0)); + // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) +} + +/* Row pin configuration + */ +static void unselect_rows(void) +{ + // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z +} + +static void select_row(uint8_t row) +{ + (void)row; + // Output low to select + // switch (row) { + // case 0: + // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL); + // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW); + // break; + // } +} diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h new file mode 100644 index 000000000..3d877aaa2 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h @@ -0,0 +1,171 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c new file mode 100644 index 000000000..820d062ff --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c @@ -0,0 +1 @@ +#include "stm32_f072_onekey.h" diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h new file mode 100644 index 000000000..0455ad342 --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h @@ -0,0 +1,5 @@ +#ifndef STM32_F072_ONEKEY_H +#define STM32_F072_ONEKEY_H +#include "chibios_test.h" +#endif + diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile new file mode 100644 index 000000000..307ca5b19 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile @@ -0,0 +1,52 @@ +# project specific files +SRC = matrix.c \ + led.c + +# GENERIC STM32F103C8T6 board - stm32duino bootloader +OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 +MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = GENERIC_STM32_F103 + +# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) +# OPT_DEFS = +# MCU_LDSCRIPT = STM32F103x8 +# BOARD = GENERIC_STM32_F103 + +# MAPLE MINI +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 +# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader +# BOARD = MAPLEMINI_STM32_F103 + +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F1xx +# linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# startup code to use +# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f1xx +# it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m3 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h new file mode 100644 index 000000000..0f45203cb --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h @@ -0,0 +1,10 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here (page 175): + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ + +// STM32F103* does NOT have an USB bootloader in ROM (only serial), +// so setting anything here does not make much sense +// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f103_onekey/chconf.h b/keyboards/chibios_test/stm32_f103_onekey/chconf.h new file mode 100644 index 000000000..dfb1f9dfb --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 2000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS FALSE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/config.h b/keyboards/chibios_test/stm32_f103_onekey/config.h new file mode 100644 index 000000000..de0b906f3 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/config.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ + +#include "../config.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/flash.sh b/keyboards/chibios_test/stm32_f103_onekey/flash.sh new file mode 100755 index 000000000..15501dfa5 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/flash.sh @@ -0,0 +1,2 @@ +#!/bin/bash +Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin diff --git a/keyboards/chibios_test/stm32_f103_onekey/halconf.h b/keyboards/chibios_test/stm32_f103_onekey/halconf.h new file mode 100644 index 000000000..1a450d632 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/led.c b/keyboards/chibios_test/stm32_f103_onekey/led.c new file mode 100644 index 000000000..f5c55f7d9 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/led.c @@ -0,0 +1,43 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + /* generic STM32F103C8T6 board */ +#ifdef BOARD_GENERIC_STM32_F103 + palClearPad(GPIOC, 13); +#endif + /* Maple Mini */ +#ifdef BOARD_MAPLEMINI_STM32_F103 + palSetPad(GPIOB, 1); +#endif + } else { + /* generic STM32F103C8T6 board */ +#ifdef BOARD_GENERIC_STM32_F103 + palSetPad(GPIOC, 13); +#endif + /* Maple Mini */ +#ifdef BOARD_MAPLEMINI_STM32_F103 + palClearPad(GPIOB,1); +#endif + } +} diff --git a/keyboards/chibios_test/stm32_f103_onekey/matrix.c b/keyboards/chibios_test/stm32_f103_onekey/matrix.c new file mode 100644 index 000000000..ea9d8d057 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/matrix.c @@ -0,0 +1,177 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * scan matrix + */ +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "wait.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +/* generic STM32F103C8T6 board */ +#ifdef BOARD_GENERIC_STM32_F103 +#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0) +#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0) +#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0) +#endif + +/* Maple Mini */ +#ifdef BOARD_MAPLEMINI_STM32_F103 +#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0) +#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0) +#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0) +#endif + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + //debug + debug_matrix = true; + LED_ON(); + wait_ms(500); + LED_OFF(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + wait_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +/* Column pin configuration + */ +static void init_cols(void) +{ +#ifdef BOARD_MAPLEMINI_STM32_F103 + // don't need pullup/down, since it's pulled down in hardware + palSetPadMode(GPIOB, 8, PAL_MODE_INPUT); +#else + palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN); +#endif +} + +/* Returns status of switches(1:on, 0:off) */ +static matrix_row_t read_cols(void) +{ + return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0)); + // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) +} + +/* Row pin configuration + */ +static void unselect_rows(void) +{ + // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z +} + +static void select_row(uint8_t row) +{ + (void)row; + // Output low to select + // switch (row) { + // case 0: + // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL); + // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW); + // break; + // } +} diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h new file mode 100644 index 000000000..626332a6a --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h @@ -0,0 +1,209 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED FALSE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_IRQ_PRIORITY 6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY 15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c new file mode 100644 index 000000000..7fa99bb28 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c @@ -0,0 +1 @@ +#include "stm32_f103_onekey.h" diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h new file mode 100644 index 000000000..89a62b2bb --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h @@ -0,0 +1,4 @@ +#ifndef STM32_F103_ONEKEY_H +#define STM32_F103_ONEKEY_H +#include "chibios_test.h" +#endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile new file mode 100644 index 000000000..43ea9d82d --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile @@ -0,0 +1,49 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = KL2x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MKL26Z64 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = kl2x + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_LC + +# Cortex version +# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 +MCU = cortex-m0plus + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 new file mode 100644 index 000000000..dbf12c363 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 @@ -0,0 +1,77 @@ +# Target file name (without extension). +PROJECT = ch + +# Directory common source files exist +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) +endif + +CONFIG_H = config.h + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MK20DX128 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x5 + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_3 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover + +include $(TMK_DIR)/tool/chibios/common.mk +include $(TMK_DIR)/tool/chibios/chibios.mk diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 new file mode 100644 index 000000000..41bfa41a0 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 @@ -0,0 +1,77 @@ +# Target file name (without extension). +PROJECT = ch + +# Directory common source files exist +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) +endif + +CONFIG_H = config.h + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MK20DX256 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x7 + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover + +include $(TMK_DIR)/tool/chibios/common.mk +include $(TMK_DIR)/tool/chibios/chibios.mk diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h new file mode 100644 index 000000000..cb36996c3 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h @@ -0,0 +1,524 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/config.h b/keyboards/chibios_test/teensy_lc_onekey/config.h new file mode 100644 index 000000000..d9eb05d2a --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/config.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ + +#include "../config.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h new file mode 100644 index 000000000..b1d2cd550 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h @@ -0,0 +1,187 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/instructions.md b/keyboards/chibios_test/teensy_lc_onekey/instructions.md new file mode 100644 index 000000000..16886a015 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/instructions.md @@ -0,0 +1,82 @@ +# Teensy LC, 3.0, 3.1, 3.2 support + +These ARM Teensies are now supported through [ChibiOS](http://chibios.org). + +You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting. + +Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `tmk_core/tool/chibios/chibios` (so that the file `tmk_core/tool/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `tmk_core/tool/chibios/chibios-contrib`. + +(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.) + +(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.) + +This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`. + +For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`. + +## About this onekey example + +It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`. + +## Credits + +TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard). + +The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions. + +## Features that are not implemented yet + +Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome). + +# Matrix programming notes + +The notes below explain what commands can be used to examine and set the status of Teensy pins. + +## ChibiOS pin manipulation basics + +### Pins + +Each pin sits on a "port", each of which comprises at most 32 individual pins. +So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number. + +Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number. + +### Mode + +A MCU pin can be in several modes. The basic command to set a pin mode is + + palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP); + +The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW). + +### Setting + +Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by + + palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn); + +or set LOW by + + palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn); + +Toggling can be done with + + palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn); + +Alternatively, you can use + + palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit); + +where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`). + +### Reading + +Reading pin status is done with + + palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn); + +The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`). + +### Further docs + +All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html). diff --git a/keyboards/chibios_test/teensy_lc_onekey/led.c b/keyboards/chibios_test/teensy_lc_onekey/led.c new file mode 100644 index 000000000..dfa60c107 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/led.c @@ -0,0 +1,32 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output high + palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + } else { + // Hi-Z + palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT); + } +} diff --git a/keyboards/chibios_test/teensy_lc_onekey/matrix.c b/keyboards/chibios_test/teensy_lc_onekey/matrix.c new file mode 100644 index 000000000..7dab04f02 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/matrix.c @@ -0,0 +1,163 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * scan matrix + */ +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "wait.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0) +#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) +#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + //debug + debug_matrix = true; + LED_ON(); + wait_ms(500); + LED_OFF(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + wait_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +/* Column pin configuration + */ +static void init_cols(void) +{ + // internal pull-up + palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP); +} + +/* Returns status of switches(1:on, 0:off) */ +static matrix_row_t read_cols(void) +{ + return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0)); + // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) +} + +/* Row pin configuration + */ +static void unselect_rows(void) +{ + palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z +} + +static void select_row(uint8_t row) +{ + (void)row; + // Output low to select + switch (row) { + case 0: + palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5); + break; + } +} diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h new file mode 100644 index 000000000..c63659019 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h @@ -0,0 +1,55 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY 96000000UL
+#define KINETIS_SYSCLK_FREQUENCY 48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c new file mode 100644 index 000000000..b6c432793 --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c @@ -0,0 +1 @@ +#include "teensy_lc_onekey.h" diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h new file mode 100644 index 000000000..ea1c84e2f --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h @@ -0,0 +1,4 @@ +#ifndef TEENSY_LC_ONEKEY_H +#define TEENSY_LC_ONEKEY_H +#include "chibios_test.h" +#endif diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile new file mode 100644 index 000000000..ccc01ea9a --- /dev/null +++ b/keyboards/clueboard/Makefile @@ -0,0 +1,109 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +SUBPROJECT_DEFAULT = rev2 + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/clueboard/clueboard.c b/keyboards/clueboard/clueboard.c new file mode 100644 index 000000000..3435202ba --- /dev/null +++ b/keyboards/clueboard/clueboard.c @@ -0,0 +1 @@ +#include "clueboard.h" diff --git a/keyboards/clueboard/clueboard.h b/keyboards/clueboard/clueboard.h new file mode 100644 index 000000000..4f2a3c1df --- /dev/null +++ b/keyboards/clueboard/clueboard.h @@ -0,0 +1,13 @@ +#ifndef CLUEBOARD_H +#define CLUEBOARD_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2.h" +#endif + +#include "quantum.h" + +#endif diff --git a/keyboards/clueboard/config.h b/keyboards/clueboard/config.h new file mode 100644 index 000000000..ceac80795 --- /dev/null +++ b/keyboards/clueboard/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define MANUFACTURER Clueboard +#define PRODUCT Clueboard +#define DESCRIPTION QMK keyboard firmware for Clueboard + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2/config.h" +#endif + +#endif diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c new file mode 100644 index 000000000..896bc7ebc --- /dev/null +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -0,0 +1,116 @@ +#include "clueboard.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,--------------------------------------------------------------------------. ,----. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| + * |--------------------------------------------------------------------------| |----| + * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| + * |--------------------------------------------------------------------------| `----' + * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| + * |-----------------------------------------------------------------------------. + * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| + * |------------------------------------------------------------------------|----|----. + * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| + * `----------------------------------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,--------------------------------------------------------------------------. ,----. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| + * |--------------------------------------------------------------------------| |----| + * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |PGUP| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HOME|PGDN| END| + * `----------------------------------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _RS: Reset layer + * ,--------------------------------------------------------------------------. ,----. + * | | | | | | | | | | | | | | | | | | + * |--------------------------------------------------------------------------| |----| + * | | | | |RESET| | | | | | | | | | | | + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL| | | | + * `----------------------------------------------------------------------------------' + */ +[_RS] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), + #else + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/max/Makefile b/keyboards/clueboard/keymaps/max/Makefile new file mode 100644 index 000000000..950dadf84 --- /dev/null +++ b/keyboards/clueboard/keymaps/max/Makefile @@ -0,0 +1,49 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/clueboard/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c new file mode 100644 index 000000000..193809840 --- /dev/null +++ b/keyboards/clueboard/keymaps/max/keymap.c @@ -0,0 +1,85 @@ +#include "clueboard.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,--------------------------------------------------------------------------. ,----. + * | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp| + * |--------------------------------------------------------------------------| |----| + * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn| + * |--------------------------------------------------------------------------| `----' + * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| + * |-----------------------------------------------------------------------------. + * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up| + * |------------------------------------------------------------------------|----|----. + * | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght| + * `----------------------------------------------------------------------------------' + */ +[_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,--------------------------------------------------------------------------. ,----. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| + * |--------------------------------------------------------------------------| |----| + * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |PGUP| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HOME|PGDN| END| + * `----------------------------------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + + /* Keymap _RS: Reset/Underlight layer + * ,--------------------------------------------------------------------------. ,----. + * | | | | | | | | | | | | | | | | | | + * |--------------------------------------------------------------------------| |----| + * | | | | |RESET| | | | | | | | | | | | + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL| | | | + * `----------------------------------------------------------------------------------' + */ +[_RS] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/*enum function_id { +};*/ + +const uint16_t PROGMEM fn_actions[] = { +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + } +} diff --git a/keyboards/clueboard/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c new file mode 100644 index 000000000..df6f054e0 --- /dev/null +++ b/keyboards/clueboard/keymaps/skully/keymap.c @@ -0,0 +1,108 @@ +#include "clueboard.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,--------------------------------------------------------------------------. ,----. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| + * |--------------------------------------------------------------------------| |----| + * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| + * |--------------------------------------------------------------------------| `----' + * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| + * |-----------------------------------------------------------------------------. + * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| + * |------------------------------------------------------------------------|----|----. + * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| + * `----------------------------------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,--------------------------------------------------------------------------. ,----. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| + * |--------------------------------------------------------------------------| |----| + * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |PGUP| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HOME|PGDN| END| + * `----------------------------------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ + KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), + + /* Keymap _RS: Reset layer + * ,--------------------------------------------------------------------------. ,----. + * | | | | | | | | | | | | | | | | | | + * |--------------------------------------------------------------------------| |----| + * | | | | |RESET| | | | | | | | | | | | + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL| | | | + * `----------------------------------------------------------------------------------' + */ +[_RS] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md new file mode 100644 index 000000000..aa301f020 --- /dev/null +++ b/keyboards/clueboard/readme.md @@ -0,0 +1,4 @@ +Clueboard keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile new file mode 100644 index 000000000..80a942d06 --- /dev/null +++ b/keyboards/clueboard/rev1/Makefile @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h new file mode 100644 index 000000000..8c9497232 --- /dev/null +++ b/keyboards/clueboard/rev1/config.h @@ -0,0 +1,36 @@ +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define PRODUCT_ID 0x2301 +#define DEVICE_VER 0x0003 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +// ROWS: Top to bottom, COLS: Left to right +/* Column pin configuration +* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 +* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1 +*/ +#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } +/* Row pin configuration +* row: 0 1 2 3 4 +* pin: D1 D0 D2 D5 D3 +*/ +#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 } +#define UNUSED_PINS + +/* Underlight configuration + */ +#define RGB_DI_PIN B2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +#endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev1/rev1.c b/keyboards/clueboard/rev1/rev1.c new file mode 100644 index 000000000..90fc6956c --- /dev/null +++ b/keyboards/clueboard/rev1/rev1.c @@ -0,0 +1,17 @@ +#include "rev1.h" + +void led_init_ports() { + // * Set our LED pins as output + DDRF |= (1<<0); +} + +void led_set_kb(uint8_t usb_led) { + DDRF |= (1<<0); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTF |= (1<<0); + } else { + // Turn capslock off + PORTF &= ~(1<<0); + } +} diff --git a/keyboards/clueboard/rev1/rev1.h b/keyboards/clueboard/rev1/rev1.h new file mode 100644 index 000000000..abdfd079b --- /dev/null +++ b/keyboards/clueboard/rev1/rev1.h @@ -0,0 +1,47 @@ +#ifndef REV1_H +#define REV1_H + +#include "../clueboard.h" + +/* Clueboard matrix layout + * ,-----------------------------------------------------------. ,---. + * | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| | 0F| + * |-----------------------------------------------------------| |---| + * | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| | 1F| + * |-----------------------------------------------------------| `---' + * | 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C| 2D| + * |------------------------------------------------------------. + * | 30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C| 3D|3E| + * |------------------------------------------------------------------. + * | 40| 41| 42| 43| 45| 46| 49| 4A| 4B| 4C| 4D| 4E| 4F| + * `------------------------------------------------------------------' + * ,-----------------------------------------------------------. ,---. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| + * |-----------------------------------------------------------| |---| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| + * |-----------------------------------------------------------| `---' + * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| + * |--------------------------------------------------------------. + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| + * |------------------------------------------------------------------. + * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| + * `------------------------------------------------------------------' + */ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k45, k46, k49, k4A, k4B, k4C, k4D, k4E, k4F \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E, k4F } \ +} + +#endif diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile new file mode 100644 index 000000000..cea967b79 --- /dev/null +++ b/keyboards/clueboard/rev2/Makefile @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h new file mode 100644 index 000000000..02982ff29 --- /dev/null +++ b/keyboards/clueboard/rev2/config.h @@ -0,0 +1,39 @@ +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define PRODUCT_ID 0x2320 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +// ROWS: Top to bottom, COLS: Left to right +/* Row pin configuration +* row: 0 1 2 3 4 5 6 7 8 9 +* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 +*/ +#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 + * pin: F0 F1 F4 F5 F6 F7 E6 B1 + */ +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } +#define UNUSED_PINS + + /* Backlight configuration + */ +#define BACKLIGHT_LEVELS 1 + +/* Underlight configuration + */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev2/rev2.c b/keyboards/clueboard/rev2/rev2.c new file mode 100644 index 000000000..1a35b87b8 --- /dev/null +++ b/keyboards/clueboard/rev2/rev2.c @@ -0,0 +1,63 @@ +#include "rev2.h" +#include <avr/io.h> +#include "backlight.h" +#include "print.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); + + // JTAG disable for PORT F. write JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); +} + + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +void backlight_init_ports(void) { + print("init_backlight_pin()\n"); + // Set our LED pins as output + DDRD |= (1<<6); // Esc + DDRB |= (1<<7); // Page Up + DDRD |= (1<<4); // Arrows + + // Set our LED pins low + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows +} + +void backlight_set(uint8_t level) { + if ( level == 0 ) { + // Turn off light + PORTD |= (1<<6); // Esc + PORTB |= (1<<7); // Page Up + PORTD |= (1<<4); // Arrows + } else { + // Turn on light + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows + } +} + +void led_init_ports() { + // * Set our LED pins as output + DDRB |= (1<<4); +} + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1<<4); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB |= (1<<4); + } else { + // Turn capslock off + PORTB &= ~(1<<4); + } +} diff --git a/keyboards/clueboard/rev2/rev2.h b/keyboards/clueboard/rev2/rev2.h new file mode 100644 index 000000000..2e9cb9dc2 --- /dev/null +++ b/keyboards/clueboard/rev2/rev2.h @@ -0,0 +1,52 @@ +#ifndef REV2_H +#define REV2_H + +#include "../clueboard.h" + +/* Clueboard matrix layout + * ,-----------------------------------------------------------. ,---. + * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57| + * |-----------------------------------------------------------| |---| + * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| + * |-----------------------------------------------------------| `---' + * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| + * |------------------------------------------------------------. + * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| + * |------------------------------------------------------------------. + * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| + * `------------------------------------------------------------------' + * ,-----------------------------------------------------------. ,---. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| + * |-----------------------------------------------------------| |---| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| + * |-----------------------------------------------------------| `---' + * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| + * |--------------------------------------------------------------. + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| + * |------------------------------------------------------------------. + * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| + * `------------------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ + k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ + k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, k55, k56, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ + { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ +} + +#endif diff --git a/keyboards/clueboard2/Makefile b/keyboards/clueboard2/Makefile new file mode 100644 index 000000000..e9367a90d --- /dev/null +++ b/keyboards/clueboard2/Makefile @@ -0,0 +1,71 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/clueboard2/clueboard2.c b/keyboards/clueboard2/clueboard2.c new file mode 100644 index 000000000..d78ffed9b --- /dev/null +++ b/keyboards/clueboard2/clueboard2.c @@ -0,0 +1,63 @@ +#include "clueboard2.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); + + // JTAG disable for PORT F. write JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); +}; + +void led_init_ports() { + // * Set our LED pins as output + DDRB |= (1<<4); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB |= (1<<4); + } else { + // Turn capslock off + PORTB &= ~(1<<4); + } +} + +/* Clueboard 2.0 LED locations: + * + * Capslock: B4, pull high to turn on + * LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH + * Page Up: B7, pull high to turn on + * Escape: D6, pull high to turn on + * Arrows: D4, pull high to turn on + */ + +void backlight_init_ports(void) { + print("init_backlight_pin()\n"); + // Set our LED pins as output + DDRD |= (1<<6); // Esc + DDRB |= (1<<7); // Page Up + DDRD |= (1<<4); // Arrows + + // Set our LED pins low + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows +} + +void backlight_set(uint8_t level) { + if ( level == 0 ) { + // Turn off light + PORTD |= (1<<6); // Esc + PORTB |= (1<<7); // Page Up + PORTD |= (1<<4); // Arrows + } else { + // Turn on light + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows + } +} diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile new file mode 100644 index 000000000..a331ff4dc --- /dev/null +++ b/keyboards/cluepad/Makefile @@ -0,0 +1,70 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality +RGBLIGHT_ENABLE ?= yes +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/cluepad/cluepad.c b/keyboards/cluepad/cluepad.c new file mode 100644 index 000000000..1867b617f --- /dev/null +++ b/keyboards/cluepad/cluepad.c @@ -0,0 +1,60 @@ +#include "cluepad.h" + +int pwm_level; + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + + // JTAG disable for PORT F. write JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); +}; + +void led_set_kb(uint8_t usb_led) +{ + print("led_set\n"); +} + +void backlight_init_ports(void) +{ + // Set C7 to output + DDRC |= (1<<7); + + // Initialize the timer + TC4H = 0x03; + OCR4C = 0xFF; + TCCR4A = 0b10000010; + TCCR4B = 0b00000001; +} + +void backlight_set(uint8_t level) +{ + // Determine the PWM level + switch (level) + { + case 0: + // 33% + pwm_level = 0x54; + break; + case 1: + // 66% + pwm_level = 0xA8; + break; + case 2: + // 100% + pwm_level = 0xFF; + break; + case 3: + // 0% + pwm_level = 0x00; + break; + default: + xprintf("Unknown level: %d\n", level); + } + + // Write the PWM level to the timer + TC4H = pwm_level >> 8; + OCR4A = 0xFF & pwm_level; +} diff --git a/keyboards/cluepad/cluepad.h b/keyboards/cluepad/cluepad.h new file mode 100644 index 000000000..5e4a5999e --- /dev/null +++ b/keyboards/cluepad/cluepad.h @@ -0,0 +1,36 @@ +#ifndef CLUEPAD_H +#define CLUEPAD_H + +#include "quantum.h" + + +/* Cluepad matrix layout + * .-------------------. + * |NLCK| /| *| -| + * |-------------------| + * | 7| 8| 9| | + * |--------------| | + * | 4| 5| 6| +| + * |-------------------| + * | 1| 2| 3| | + * |--------------| | + * | 0| .| Ent| + * '-------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k33, \ + k40, k42 \ +) { \ + { k00, k01, k02, k03, }, \ + { k10, k11, k12, k13, }, \ + { k20, k21, k22, KC_NO, }, \ + { k30, k31, k32, k33, }, \ + { k40, KC_NO, k42, KC_NO } \ +} + +#endif diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h new file mode 100644 index 000000000..bae05fade --- /dev/null +++ b/keyboards/cluepad/config.h @@ -0,0 +1,100 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2312 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Clueboard +#define PRODUCT Cluepad with RGB Underlighting +#define DESCRIPTION QMK keyboard firmware for Cluepad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +// ROWS: Top to bottom, COLS: Left to right +/* Row pin configuration +* row: 0 1 2 3 4 +* pin: +*/ +#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 } +/* Column pin configuration + * col: 0 1 2 3 + * pin: F4 E6 B1 D2 + */ +#define MATRIX_COL_PINS { F4, E6, B1, D2 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Number of backlighting levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Underlight configuration + */ +#define RGB_DI_PIN F6 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 4 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* Debug forcibly enabled */ +#define ALWAYS_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/cluepad/keymaps/default/keymap.c b/keyboards/cluepad/keymaps/default/keymap.c new file mode 100644 index 000000000..66827fe48 --- /dev/null +++ b/keyboards/cluepad/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +#include "cluepad.h" + +#include "backlight.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * .-------------------. + * |NL F| /| *| -| + * |-------------------| + * | 7| 8| 9| | + * |--------------| | + * | 4| 5| 6| +| + * |-------------------| + * | 1| 2| 3| | + * |--------------| | + * | 0| .| Ent| + * '-------------------' + */ +[_BL] = KEYMAP( + LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_PDOT), + + /* Keymap _FL: Function Layer + * .-------------------. + * |NL F| | | Fn0| + * |-------------------| + * | | Fn4| | | + * |--------------| | + * | Fn3|BL_S| Fn2| Fn6| + * |-------------------| + * | | Fn5| | | + * |--------------| | + * | Fn1| | Fn7| + * '-------------------' + */ +[_FL] = KEYMAP( + LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, RGB_TOG, \ + KC_TRNS, RGB_SAI, KC_TRNS, RGB_VAI, \ + RGB_HUD, BL_STEP, RGB_HUI, \ + KC_TRNS, RGB_SAD, KC_TRNS, RGB_VAD, \ + RGB_MOD, KC_TRNS) +}; + +/*enum function_id { +};*/ + +const uint16_t PROGMEM fn_actions[] = { +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + } +} + diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md new file mode 100644 index 000000000..8450340f2 --- /dev/null +++ b/keyboards/cluepad/readme.md @@ -0,0 +1,4 @@ +Cluepad number pad firmware +====================== + +TODO: to be updated. diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile new file mode 100644 index 000000000..05fb588d1 --- /dev/null +++ b/keyboards/ergodox/Makefile @@ -0,0 +1,34 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- +SUBPROJECT_DEFAULT = ez + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h new file mode 100644 index 000000000..edc60caae --- /dev/null +++ b/keyboards/ergodox/config.h @@ -0,0 +1,36 @@ +#ifndef KEYBOARDS_ERGODOX_CONFIG_H_ +#define KEYBOARDS_ERGODOX_CONFIG_H_ + +#define MOUSEKEY_DELAY 100 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 3 +#define MOUSEKEY_TIME_TO_MAX 10 + +#define TAPPING_TOGGLE 1 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ + keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ +) + +#ifdef SUBPROJECT_ez + #include "ez/config.h" +#endif +#ifdef SUBPROJECT_infinity + #include "infinity/config.h" +#endif + + +#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox/ergodox.c b/keyboards/ergodox/ergodox.c new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/keyboards/ergodox/ergodox.c diff --git a/keyboards/ergodox/ergodox.h b/keyboards/ergodox/ergodox.h new file mode 100644 index 000000000..f8ec8b5bf --- /dev/null +++ b/keyboards/ergodox/ergodox.h @@ -0,0 +1,10 @@ +#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_ +#define KEYBOARDS_ERGODOX_ERGODOX_H_ +#ifdef SUBPROJECT_ez + #include "ez.h" +#endif +#ifdef SUBPROJECT_infinity + #include "infinity.h" +#endif + +#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */ diff --git a/keyboards/ergodox/ez/190hotfix.sh b/keyboards/ergodox/ez/190hotfix.sh new file mode 100755 index 000000000..bdc3adce2 --- /dev/null +++ b/keyboards/ergodox/ez/190hotfix.sh @@ -0,0 +1,19 @@ +#!/bin/bash +#a tool to fix broken keymaps as a result of pull request #190 +#changing the declaration of matrix_scan_user() and matrix_init_user() +# +#This script will save a copy of the specified keymap as keymap.c.bak +#and then create a new keymap.c with the definion corrected. +#this script must be run from the ergodox_ez directory +if [ $# -ne 1 ]; then + echo $0: usage: ./190hotfix keymap_name + exit 1 +fi + +echo Saving backup as ./keymaps/$1/keymap.c.bak ... +mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak + +echo Modifying ./keymaps/$1/keymap.c ... +cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c + +echo Complete! diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile new file mode 100644 index 000000000..37e554b30 --- /dev/null +++ b/keyboards/ergodox/ez/Makefile @@ -0,0 +1,76 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make = Make software. +# +# make clean = Clean out built project files. +# +# That's pretty much all you need. To compile, always go make clean, +# followed by make. +# +# For advanced users only: +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +#---------------------------------------------------------------------------- + +# # project specific files +SRC = twimaster.c \ + matrix.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h new file mode 100644 index 000000000..084a044ee --- /dev/null +++ b/keyboards/ergodox/ez/config.h @@ -0,0 +1,65 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef ERGODOX_EZ_CONFIG_H +#define ERGODOX_EZ_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1307 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ErgoDox EZ +#define PRODUCT ErgoDox EZ +#define DESCRIPTION QMK keyboard firmware for Ergodox EZ + +/* key matrix size */ +#define MATRIX_ROWS 14 +#define MATRIX_COLS 6 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_HI 255 + + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +//#define DEBUG_MATRIX_SCAN_RATE + +#endif diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c new file mode 100644 index 000000000..e7afc9859 --- /dev/null +++ b/keyboards/ergodox/ez/ez.c @@ -0,0 +1,85 @@ +#include "ez.h" +#include "i2cmaster.h" + +bool i2c_initialized = 0; +uint8_t mcp23018_status = 0x20; + +void matrix_init_kb(void) { + // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") + TCCR1A = 0b10101001; // set and configure fast PWM + TCCR1B = 0b00001001; // set and configure fast PWM + + // (tied to Vcc for hardware convenience) + DDRB &= ~(1<<4); // set B(4) as input + PORTB &= ~(1<<4); // set B(4) internal pull-up disabled + + // unused pins - C7, D4, D5, D7, E6 + // set as input with internal pull-ip enabled + DDRC &= ~(1<<7); + DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRE &= ~(1<<6); + PORTC |= (1<<7); + PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTE |= (1<<6); + + ergodox_blink_all_leds(); + + matrix_init_user(); +} + +void ergodox_blink_all_leds(void) +{ + ergodox_led_all_off(); + ergodox_led_all_set(LED_BRIGHTNESS_HI); + ergodox_right_led_1_on(); + _delay_ms(50); + ergodox_right_led_2_on(); + _delay_ms(50); + ergodox_right_led_3_on(); + _delay_ms(50); + ergodox_right_led_1_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_3_off(); + //ergodox_led_all_on(); + //_delay_ms(333); + ergodox_led_all_off(); +} + +uint8_t init_mcp23018(void) { + mcp23018_status = 0x20; + + // I2C subsystem + if (i2c_initialized == 0) { + i2c_init(); // on pins D(1,0) + i2c_initialized++; + _delay_ms(1000); + } + + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; + i2c_stop(); + + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; + +out: + i2c_stop(); + + return mcp23018_status; +} + + diff --git a/keyboards/ergodox/ez/ez.h b/keyboards/ergodox/ez/ez.h new file mode 100644 index 000000000..db4ec867b --- /dev/null +++ b/keyboards/ergodox/ez/ez.h @@ -0,0 +1,122 @@ +#ifndef ERGODOX_EZ_H +#define ERGODOX_EZ_H + +#include "quantum.h" +#include <stdint.h> +#include <stdbool.h> +#include "i2cmaster.h" +#include <util/delay.h> + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define CPU_16MHz 0x00 + +// I2C aliases and register addresses (see "mcp23018.md") +#define I2C_ADDR 0b0100000 +#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) +#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPPUB 0x0D +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define GPIOB 0x13 +#define OLATA 0x14 // output latch register +#define OLATB 0x15 + +extern uint8_t mcp23018_status; + +void init_ergodox(void); +void ergodox_blink_all_leds(void); +uint8_t init_mcp23018(void); +uint8_t ergodox_left_leds_update(void); + +#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_HI 255 + + +inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); } +inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); } +inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); } +inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); } +inline void ergodox_right_led_on(uint8_t led) { DDRB |= (1<<(led+4)); PORTB |= (1<<(led+4)); } + +inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); } +inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); } +inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); } +inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); } +inline void ergodox_right_led_off(uint8_t led) { DDRB &= ~(1<<(led+4)); PORTB &= ~(1<<(led+4)); } + +inline void ergodox_led_all_on(void) +{ + ergodox_board_led_on(); + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); +} + +inline void ergodox_led_all_off(void) +{ + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +} + +inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; } +inline void ergodox_right_led_2_set(uint8_t n) { OCR1B = n; } +inline void ergodox_right_led_3_set(uint8_t n) { OCR1C = n; } +inline void ergodox_right_led_set(uint8_t led, uint8_t n) { + (led == 1) ? (OCR1A = n) : + (led == 2) ? (OCR1B = n) : + (OCR1C = n); +} + +inline void ergodox_led_all_set(uint8_t n) +{ + ergodox_right_led_1_set(n); + ergodox_right_led_2_set(n); + ergodox_right_led_3_set(n); +} + +#define KEYMAP( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k10, k20, k30, k40, KC_NO }, \ + { k01, k11, k21, k31, k41, k51 }, \ + { k02, k12, k22, k32, k42, k52 }, \ + { k03, k13, k23, k33, k43, k53 }, \ + { k04, k14, k24, k34, k44, k54 }, \ + { k05, k15, k25, k35, KC_NO, k55 }, \ + { k06, k16, KC_NO, k36, KC_NO, k56 }, \ + \ + { k07, k17, KC_NO, k37,KC_NO, k57 }, \ + { k08, k18, k28, k38,KC_NO, k58 }, \ + { k09, k19, k29, k39, k49, k59 }, \ + { k0A, k1A, k2A, k3A, k4A, k5A }, \ + { k0B, k1B, k2B, k3B, k4B, k5B }, \ + { k0C, k1C, k2C, k3C, k4C, k5C }, \ + { k0D, k1D, k2D, k3D, k4D, KC_NO } \ + } + +#endif diff --git a/keyboards/ergodox/ez/i2cmaster.h b/keyboards/ergodox/ez/i2cmaster.h new file mode 100644 index 000000000..3917b9e6c --- /dev/null +++ b/keyboards/ergodox/ez/i2cmaster.h @@ -0,0 +1,178 @@ +#ifndef _I2CMASTER_H +#define _I2CMASTER_H 1 +/************************************************************************* +* Title: C include file for the I2C master interface +* (i2cmaster.S or twimaster.c) +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device +* Usage: see Doxygen manual +**************************************************************************/ + +#ifdef DOXYGEN +/** + @defgroup pfleury_ic2master I2C Master library + @code #include <i2cmaster.h> @endcode + + @brief I2C (TWI) Master Software Library + + Basic routines for communicating with I2C slave devices. This single master + implementation is limited to one bus master on the I2C bus. + + This I2c library is implemented as a compact assembler software implementation of the I2C protocol + which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). + Since the API for these two implementations is exactly the same, an application can be linked either against the + software I2C implementation or the hardware I2C implementation. + + Use 4.7k pull-up resistor on the SDA and SCL pin. + + Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module + i2cmaster.S to your target when using the software I2C implementation ! + + Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. + + @note + The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted + to GNU assembler and AVR-GCC C call interface. + Replaced the incorrect quarter period delays found in AVR300 with + half period delays. + + @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury + + @par API Usage Example + The following code shows typical usage of this library, see example test_i2cmaster.c + + @code + + #include <i2cmaster.h> + + + #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet + + int main(void) + { + unsigned char ret; + + i2c_init(); // initialize I2C library + + // write 0x75 to EEPROM address 5 (Byte Write) + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + i2c_write(0x05); // write address = 5 + i2c_write(0x75); // write value 0x75 to EEPROM + i2c_stop(); // set stop conditon = release bus + + + // read previously written value back from EEPROM address 5 + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + + i2c_write(0x05); // write address = 5 + i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode + + ret = i2c_readNak(); // read one byte from EEPROM + i2c_stop(); + + for(;;); + } + @endcode + +*/ +#endif /* DOXYGEN */ + +/**@{*/ + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 +#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" +#endif + +#include <avr/io.h> + +/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_READ 1 + +/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_WRITE 0 + + +/** + @brief initialize the I2C master interace. Need to be called only once + @param void + @return none + */ +extern void i2c_init(void); + + +/** + @brief Terminates the data transfer and releases the I2C bus + @param void + @return none + */ +extern void i2c_stop(void); + + +/** + @brief Issues a start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_start(unsigned char addr); + + +/** + @brief Issues a repeated start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_rep_start(unsigned char addr); + + +/** + @brief Issues a start condition and sends address and transfer direction + + If device is busy, use ack polling to wait until device ready + @param addr address and transfer direction of I2C device + @return none + */ +extern void i2c_start_wait(unsigned char addr); + + +/** + @brief Send one byte to I2C device + @param data byte to be transfered + @retval 0 write successful + @retval 1 write failed + */ +extern unsigned char i2c_write(unsigned char data); + + +/** + @brief read one byte from the I2C device, request more data from device + @return byte read from I2C device + */ +extern unsigned char i2c_readAck(void); + +/** + @brief read one byte from the I2C device, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_readNak(void); + +/** + @brief read one byte from the I2C device + + Implemented as a macro, which calls either i2c_readAck or i2c_readNak + + @param ack 1 send ack, request more data from device<br> + 0 send nak, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_read(unsigned char ack); +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + + +/**@}*/ +#endif diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c new file mode 100644 index 000000000..a19bab90b --- /dev/null +++ b/keyboards/ergodox/ez/matrix.c @@ -0,0 +1,382 @@ +/* + +Note for ErgoDox EZ customizers: Here be dragons! +This is not a file you want to be messing with. +All of the interesting stuff for you is under keymaps/ :) +Love, Erez + +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "ez.h" +#include "i2cmaster.h" +#ifdef DEBUG_MATRIX_SCAN_RATE +#include "timer.h" +#endif + +/* + * This constant define not debouncing time in msecs, but amount of matrix + * scan loops which should be made to get stable debounced results. + * + * On Ergodox matrix scan rate is relatively low, because of slow I2C. + * Now it's only 317 scans/second, or about 3.15 msec/scan. + * According to Cherry specs, debouncing time is 5 msec. + * + * And so, there is no sense to have DEBOUNCE higher than 2. + */ + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +static uint8_t mcp23018_reset_loop; + +#ifdef DEBUG_MATRIX_SCAN_RATE +uint32_t matrix_timer; +uint32_t matrix_scan_count; +#endif + + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + + mcp23018_status = init_mcp23018(); + + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif + + matrix_init_kb(); + +} + +void matrix_power_up(void) { + mcp23018_status = init_mcp23018(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif + +} + +uint8_t matrix_scan(void) +{ + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + ergodox_blink_all_leds(); + } + } + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_scan_count++; + + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); + + matrix_timer = timer_now; + matrix_scan_count = 0; + } +#endif + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(i); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + wait_us(1); + // this should be wait_ms(1) but has been left as-is at EZ's request + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * + * Teensy + * col: 0 1 2 3 4 5 + * pin: F0 F1 F4 F5 F6 F7 + * + * MCP23018 + * col: 0 1 2 3 4 5 + * pin: B5 B4 B3 B2 B1 B0 + */ +static void init_cols(void) +{ + // init on mcp23018 + // not needed, already done as part of init_mcp23018() + + // init on teensy + // Input with pull-up(DDR:0, PORT:1) + DDRF &= ~(1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0); + PORTF |= (1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0); +} + +static matrix_row_t read_cols(uint8_t row) +{ + if (row < 7) { + if (mcp23018_status) { // if there was an error + return 0; + } else { + uint8_t data = 0; + mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out; + data = i2c_readNak(); + data = ~data; + out: + i2c_stop(); + return data; + } + } else { + // read from teensy + return + (PINF&(1<<0) ? 0 : (1<<0)) | + (PINF&(1<<1) ? 0 : (1<<1)) | + (PINF&(1<<4) ? 0 : (1<<2)) | + (PINF&(1<<5) ? 0 : (1<<3)) | + (PINF&(1<<6) ? 0 : (1<<4)) | + (PINF&(1<<7) ? 0 : (1<<5)) ; + } +} + +/* Row pin configuration + * + * Teensy + * row: 7 8 9 10 11 12 13 + * pin: B0 B1 B2 B3 D2 D3 C6 + * + * MCP23018 + * row: 0 1 2 3 4 5 6 + * pin: A0 A1 A2 A3 A4 A5 A6 + */ +static void unselect_rows(void) +{ + // unselect on mcp23018 + if (mcp23018_status) { // if there was an error + // do nothing + } else { + // set all rows hi-Z : 1 + mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out; + mcp23018_status = i2c_write( 0xFF + & ~(0<<7) + ); if (mcp23018_status) goto out; + out: + i2c_stop(); + } + + // unselect on teensy + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); + PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); + DDRD &= ~(1<<2 | 1<<3); + PORTD &= ~(1<<2 | 1<<3); + DDRC &= ~(1<<6); + PORTC &= ~(1<<6); +} + +static void select_row(uint8_t row) +{ + if (row < 7) { + // select on mcp23018 + if (mcp23018_status) { // if there was an error + // do nothing + } else { + // set active row low : 0 + // set other rows hi-Z : 1 + mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out; + mcp23018_status = i2c_write( 0xFF & ~(1<<row) + & ~(0<<7) + ); if (mcp23018_status) goto out; + out: + i2c_stop(); + } + } else { + // select on teensy + // Output low(DDR:1, PORT:0) to select + switch (row) { + case 7: + DDRB |= (1<<0); + PORTB &= ~(1<<0); + break; + case 8: + DDRB |= (1<<1); + PORTB &= ~(1<<1); + break; + case 9: + DDRB |= (1<<2); + PORTB &= ~(1<<2); + break; + case 10: + DDRB |= (1<<3); + PORTB &= ~(1<<3); + break; + case 11: + DDRD |= (1<<2); + PORTD &= ~(1<<3); + break; + case 12: + DDRD |= (1<<3); + PORTD &= ~(1<<3); + break; + case 13: + DDRC |= (1<<6); + PORTC &= ~(1<<6); + break; + } + } +} + diff --git a/keyboards/ergodox/ez/twimaster.c b/keyboards/ergodox/ez/twimaster.c new file mode 100644 index 000000000..f91c08e6e --- /dev/null +++ b/keyboards/ergodox/ez/twimaster.c @@ -0,0 +1,208 @@ +/************************************************************************* +* Title: I2C master library using hardware TWI interface +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device with hardware TWI +* Usage: API compatible with I2C Software Library i2cmaster.h +**************************************************************************/ +#include <inttypes.h> +#include <compat/twi.h> + +#include <i2cmaster.h> + + +/* define CPU frequency in Mhz here if not defined in Makefile */ +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +/* I2C clock in Hz */ +#define SCL_CLOCK 400000L + + +/************************************************************************* + Initialization of the I2C bus interface. Need to be called only once +*************************************************************************/ +void i2c_init(void) +{ + /* initialize TWI clock + * minimal values in Bit Rate Register (TWBR) and minimal Prescaler + * bits in the TWI Status Register should give us maximal possible + * I2C bus speed - about 444 kHz + * + * for more details, see 20.5.2 in ATmega16/32 secification + */ + + TWSR = 0; /* no prescaler */ + TWBR = 10; /* must be >= 10 for stable operation */ + +}/* i2c_init */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + return 0 = device accessible, 1= failed to access device +*************************************************************************/ +unsigned char i2c_start(unsigned char address) +{ + uint8_t twst; + + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) return 1; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed and ACK/NACK has been received + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1; + + return 0; + +}/* i2c_start */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + If device is busy, use ack polling to wait until device is ready + + Input: address and transfer direction of I2C device +*************************************************************************/ +void i2c_start_wait(unsigned char address) +{ + uint8_t twst; + + + while ( 1 ) + { + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) continue; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) ) + { + /* device busy, send stop condition to terminate write operation */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + + continue; + } + //if( twst != TW_MT_SLA_ACK) return 1; + break; + } + +}/* i2c_start_wait */ + + +/************************************************************************* + Issues a repeated start condition and sends address and transfer direction + + Input: address and transfer direction of I2C device + + Return: 0 device accessible + 1 failed to access device +*************************************************************************/ +unsigned char i2c_rep_start(unsigned char address) +{ + return i2c_start( address ); + +}/* i2c_rep_start */ + + +/************************************************************************* + Terminates the data transfer and releases the I2C bus +*************************************************************************/ +void i2c_stop(void) +{ + /* send stop condition */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + +}/* i2c_stop */ + + +/************************************************************************* + Send one byte to I2C device + + Input: byte to be transfered + Return: 0 write successful + 1 write failed +*************************************************************************/ +unsigned char i2c_write( unsigned char data ) +{ + uint8_t twst; + + // send data to the previously addressed device + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits + twst = TW_STATUS & 0xF8; + if( twst != TW_MT_DATA_ACK) return 1; + return 0; + +}/* i2c_write */ + + +/************************************************************************* + Read one byte from the I2C device, request more data from device + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readAck(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readAck */ + + +/************************************************************************* + Read one byte from the I2C device, read is followed by a stop condition + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readNak(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readNak */ diff --git a/keyboards/ergodox/ez/util/compile_keymap.py b/keyboards/ergodox/ez/util/compile_keymap.py new file mode 100644 index 000000000..7076a6ecb --- /dev/null +++ b/keyboards/ergodox/ez/util/compile_keymap.py @@ -0,0 +1,710 @@ +#!/usr/bin/env python +# -*- coding: utf-8 -*- +"""Compiler for keymap.c files + +This scrip will generate a keymap.c file from a simple +markdown file with a specific layout. + +Usage: + python compile_keymap.py INPUT_PATH [OUTPUT_PATH] +""" +from __future__ import division +from __future__ import print_function +from __future__ import absolute_import +from __future__ import unicode_literals + +import os +import io +import re +import sys +import json +import unicodedata +import collections +import itertools as it + +PY2 = sys.version_info.major == 2 + +if PY2: + chr = unichr + + +KEYBOARD_LAYOUTS = { + # These map positions in the parsed layout to + # positions in the KEYMAP MATRIX + 'ergodox_ez': [ + [ 0, 1, 2, 3, 4, 5, 6], [38, 39, 40, 41, 42, 43, 44], + [ 7, 8, 9, 10, 11, 12, 13], [45, 46, 47, 48, 49, 50, 51], + [14, 15, 16, 17, 18, 19 ], [ 52, 53, 54, 55, 56, 57], + [20, 21, 22, 23, 24, 25, 26], [58, 59, 60, 61, 62, 63, 64], + [27, 28, 29, 30, 31 ], [ 65, 66, 67, 68, 69], + [ 32, 33], [70, 71 ], + [ 34], [72 ], + [ 35, 36, 37], [73, 74, 75 ], + ] +} + +ROW_INDENTS = { + 'ergodox_ez': [0, 0, 0, 0, 0, 1, 0, 0, 0, 2, 5, 0, 6, 0, 4, 0] +} + +BLANK_LAYOUTS = [ +# Compact Layout +""" +.------------------------------------.------------------------------------. +| | | | | | | | | | | | | | | +!-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! +| | | | | | | | | | | | | | | +!-----+----+----+----x----x----! ! !----x----x----+----+----+-----! +| | | | | | |-----!-----! | | | | | | +!-----+----+----+----x----x----! ! !----x----x----+----+----+-----! +| | | | | | | | | | | | | | | +'-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' +""", + +# Wide Layout +""" +.---------------------------------------------. .---------------------------------------------. +| | | | | | | | ! | | | | | | | +!-------+-----+-----+-----+-----+-------------! !-------+-----+-----+-----+-----+-----+-------! +| | | | | | | | ! | | | | | | | +!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------! +| | | | | | |-------! !-------! | | | | | | +!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------! +| | | | | | | | ! | | | | | | | +'-------+-----+-----+-----+-----+-------------' '-------------+-----+-----+-----+-----+-------' + | | | | | | ! | | | | | + '------------------------------' '------------------------------' + .---------------. .---------------. + | | | ! | | + .-------+-------+-------! !-------+-------+-------. + ! ! | | ! | ! ! + ! ! !-------! !-------! ! ! + | | | | ! | | | + '-----------------------' '-----------------------' +""", +] + + +DEFAULT_CONFIG = { + "keymaps_includes": [ + "keymap_common.h", + ], + 'filler': "-+.'!:x", + 'separator': "|", + 'default_key_prefix': ["KC_"], +} + + +SECTIONS = [ + 'layout_config', + 'layers', +] + + +# Markdown Parsing + +ONELINE_COMMENT_RE = re.compile(r""" + ^ # comment must be at the start of the line + \s* # arbitrary whitespace + // # start of the comment + (.*) # the comment + $ # until the end of line +""", re.MULTILINE | re.VERBOSE +) + +INLINE_COMMENT_RE = re.compile(r""" + ([\,\"\[\]\{\}\d]) # anythig that might end a expression + \s+ # comment must be preceded by whitespace + // # start of the comment + \s # and succeded by whitespace + (?:[^\"\]\}\{\[]*) # the comment (except things which might be json) + $ # until the end of line +""", re.MULTILINE | re.VERBOSE) + +TRAILING_COMMA_RE = re.compile(r""" + , # the comma + (?:\s*) # arbitrary whitespace + $ # only works if the trailing comma is followed by newline + (\s*) # arbitrary whitespace + ([\]\}]) # end of an array or object +""", re.MULTILINE | re.VERBOSE) + + +def loads(raw_data): + if isinstance(raw_data, bytes): + raw_data = raw_data.decode('utf-8') + + raw_data = ONELINE_COMMENT_RE.sub(r"", raw_data) + raw_data = INLINE_COMMENT_RE.sub(r"\1", raw_data) + raw_data = TRAILING_COMMA_RE.sub(r"\1\2", raw_data) + return json.loads(raw_data) + + +def parse_config(path): + def reset_section(): + section.update({ + 'name': section.get('name', ""), + 'sub_name': "", + 'start_line': -1, + 'end_line': -1, + 'code_lines': [], + }) + + def start_section(line_index, line): + end_section() + if line.startswith("# "): + name = line[2:] + elif line.startswith("## "): + name = line[3:] + else: + name = "" + + name = name.strip().replace(" ", "_").lower() + if name in SECTIONS: + section['name'] = name + else: + section['sub_name'] = name + section['start_line'] = line_index + + def end_section(): + if section['start_line'] >= 0: + if section['name'] == 'layout_config': + config.update(loads("\n".join( + section['code_lines'] + ))) + elif section['sub_name'].startswith('layer'): + layer_name = section['sub_name'] + config['layer_lines'][layer_name] = section['code_lines'] + + reset_section() + + def amend_section(line_index, line): + section['end_line'] = line_index + section['code_lines'].append(line) + + config = DEFAULT_CONFIG.copy() + config.update({ + 'layer_lines': collections.OrderedDict(), + 'macro_ids': {'UM'}, + 'unicode_macros': {}, + }) + + section = {} + reset_section() + + with io.open(path, encoding="utf-8") as fh: + for i, line in enumerate(fh): + if line.startswith("#"): + start_section(i, line) + elif line.startswith(" "): + amend_section(i, line[4:]) + else: + # TODO: maybe parse description + pass + + end_section() + assert 'layout' in config + return config + +# header file parsing + +IF0_RE = re.compile(r""" + ^ + #if 0 + $.*? + #endif +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +COMMENT_RE = re.compile(r""" + /\* + .*? + \*/" +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +def read_header_file(path): + with io.open(path, encoding="utf-8") as fh: + data = fh.read() + data, _ = COMMENT_RE.subn("", data) + data, _ = IF0_RE.subn("", data) + return data + + +def regex_partial(re_str_fmt, flags): + def partial(*args, **kwargs): + re_str = re_str_fmt.format(*args, **kwargs) + return re.compile(re_str, flags) + return partial + + +KEYDEF_REP = regex_partial(r""" + #define + \s + ( + (?:{}) # the prefixes + (?:\w+) # the key name + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +ENUM_RE = re.compile(r""" + ( + enum + \s\w+\s + \{ + .*? # the enum content + \} + ; + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +ENUM_KEY_REP = regex_partial(r""" + ( + {} # the prefixes + \w+ # the key name + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +def parse_keydefs(config, data): + prefix_options = "|".join(config['key_prefixes']) + keydef_re = KEYDEF_REP(prefix_options) + enum_key_re = ENUM_KEY_REP(prefix_options) + for match in keydef_re.finditer(data): + yield match.groups()[0] + + for enum_match in ENUM_RE.finditer(data): + enum = enum_match.groups()[0] + for key_match in enum_key_re.finditer(enum): + yield key_match.groups()[0] + + +def parse_valid_keys(config, out_path): + basepath = os.path.abspath(os.path.join(os.path.dirname(out_path))) + dirpaths = [] + subpaths = [] + while len(subpaths) < 6: + path = os.path.join(basepath, *subpaths) + dirpaths.append(path) + dirpaths.append(os.path.join(path, "tmk_core", "common")) + dirpaths.append(os.path.join(path, "quantum")) + subpaths.append('..') + + includes = set(config['keymaps_includes']) + includes.add("keycode.h") + + valid_keycodes = set() + for dirpath, include in it.product(dirpaths, includes): + include_path = os.path.join(dirpath, include) + if os.path.exists(include_path): + header_data = read_header_file(include_path) + valid_keycodes.update( + parse_keydefs(config, header_data) + ) + return valid_keycodes + + +# Keymap Parsing + +def iter_raw_codes(layer_lines, filler, separator): + filler_re = re.compile("[" + filler + " ]") + for line in layer_lines: + line, _ = filler_re.subn("", line.strip()) + if not line: + continue + codes = line.split(separator) + for code in codes[1:-1]: + yield code + + +def iter_indexed_codes(raw_codes, key_indexes): + key_rows = {} + key_indexes_flat = [] + + for row_index, key_indexes in enumerate(key_indexes): + for key_index in key_indexes: + key_rows[key_index] = row_index + key_indexes_flat.extend(key_indexes) + assert len(raw_codes) == len(key_indexes_flat) + for raw_code, key_index in zip(raw_codes, key_indexes_flat): + # we keep track of the row mostly for layout purposes + yield raw_code, key_index, key_rows[key_index] + + +LAYER_CHANGE_RE = re.compile(r""" + (DF|TG|MO)\(\d+\) +""", re.VERBOSE) + + +MACRO_RE = re.compile(r""" + M\(\w+\) +""", re.VERBOSE) + + +UNICODE_RE = re.compile(r""" + U[0-9A-F]{4} +""", re.VERBOSE) + + +NON_CODE = re.compile(r""" + ^[^A-Z0-9_]$ +""", re.VERBOSE) + + +def parse_uni_code(raw_code): + macro_id = "UC_" + ( + unicodedata.name(raw_code) + .replace(" ", "_") + .replace("-", "_") + ) + code = "M({})".format(macro_id) + uc_hex = "{:04X}".format(ord(raw_code)) + return code, macro_id, uc_hex + + +def parse_key_code(raw_code, key_prefixes, valid_keycodes): + if raw_code in valid_keycodes: + return raw_code + + for prefix in key_prefixes: + code = prefix + raw_code + if code in valid_keycodes: + return code + + +def parse_code(raw_code, key_prefixes, valid_keycodes): + if not raw_code: + return 'KC_TRNS', None, None + + if LAYER_CHANGE_RE.match(raw_code): + return raw_code, None, None + + if MACRO_RE.match(raw_code): + macro_id = raw_code[2:-1] + return raw_code, macro_id, None + + if UNICODE_RE.match(raw_code): + hex_code = raw_code[1:] + return parse_uni_code(chr(int(hex_code, 16))) + + if NON_CODE.match(raw_code): + return parse_uni_code(raw_code) + + code = parse_key_code(raw_code, key_prefixes, valid_keycodes) + return code, None, None + + +def parse_keymap(config, key_indexes, layer_lines, valid_keycodes): + keymap = {} + raw_codes = list(iter_raw_codes( + layer_lines, config['filler'], config['separator'] + )) + indexed_codes = iter_indexed_codes(raw_codes, key_indexes) + key_prefixes = config['key_prefixes'] + for raw_code, key_index, row_index in indexed_codes: + code, macro_id, uc_hex = parse_code( + raw_code, key_prefixes, valid_keycodes + ) + # TODO: line numbers for invalid codes + err_msg = "Could not parse key '{}' on row {}".format( + raw_code, row_index + ) + assert code is not None, err_msg + # print(repr(raw_code), repr(code), macro_id, uc_hex) + if macro_id: + config['macro_ids'].add(macro_id) + if uc_hex: + config['unicode_macros'][macro_id] = uc_hex + keymap[key_index] = (code, row_index) + return keymap + + +def parse_keymaps(config, valid_keycodes): + keymaps = collections.OrderedDict() + key_indexes = config.get( + 'key_indexes', KEYBOARD_LAYOUTS[config['layout']] + ) + # TODO: maybe validate key_indexes + + for layer_name, layer_lines, in config['layer_lines'].items(): + keymaps[layer_name] = parse_keymap( + config, key_indexes, layer_lines, valid_keycodes + ) + return keymaps + +# keymap.c output + +USERCODE = """ +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case L1: + ergodox_right_led_1_on(); + break; + case L2: + ergodox_right_led_2_on(); + break; + case L3: + ergodox_right_led_3_on(); + break; + case L4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case L5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + // case L6: + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + // case L7: + // ergodox_right_led_1_on(); + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + default: + ergodox_board_led_off(); + break; + } +}; +""" + +MACROCODE = """ +#define UC_MODE_WIN 0 +#define UC_MODE_LINUX 1 +#define UC_MODE_OSX 2 + +// TODO: allow default mode to be configured +static uint16_t unicode_mode = UC_MODE_WIN; + +uint16_t hextokeycode(uint8_t hex) {{ + if (hex == 0x0) {{ + return KC_P0; + }} + if (hex < 0xA) {{ + return KC_P1 + (hex - 0x1); + }} + return KC_A + (hex - 0xA); +}} + +void unicode_action_function(uint16_t hi, uint16_t lo) {{ + switch (unicode_mode) {{ + case UC_MODE_WIN: + register_code(KC_LALT); + + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LALT); + break; + case UC_MODE_LINUX: + register_code(KC_LCTL); + register_code(KC_LSFT); + + register_code(KC_U); + unregister_code(KC_U); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LCTL); + unregister_code(KC_LSFT); + break; + case UC_MODE_OSX: + break; + }} +}} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {{ + if (!record->event.pressed) {{ + return MACRO_NONE; + }} + // MACRODOWN only works in this function + switch(id) {{ + case UM: + unicode_mode = (unicode_mode + 1) % 2; + break; +{macro_cases} +{unicode_macro_cases} + default: + break; + }} + return MACRO_NONE; +}}; +""" + + +UNICODE_MACRO_TEMPLATE = """ +case {macro_id}: + unicode_action_function(0x{hi:02x}, 0x{lo:02x}); + break; +""".strip() + + +def unicode_macro_cases(config): + for macro_id, uc_hex in config['unicode_macros'].items(): + hi = int(uc_hex, 16) >> 8 + lo = int(uc_hex, 16) & 0xFF + unimacro_keys = ", ".join( + "T({})".format( + "KP_" + digit if digit.isdigit() else digit + ) for digit in uc_hex + ) + yield UNICODE_MACRO_TEMPLATE.format( + macro_id=macro_id, hi=hi, lo=lo + ) + + +def iter_keymap_lines(keymap, row_indents=None): + col_widths = {} + col = 0 + # first pass, figure out the column widths + prev_row_index = None + for code, row_index in keymap.values(): + if row_index != prev_row_index: + col = 0 + if row_indents: + col = row_indents[row_index] + col_widths[col] = max(len(code), col_widths.get(col, 0)) + prev_row_index = row_index + col += 1 + + # second pass, yield the cell values + col = 0 + prev_row_index = None + for key_index in sorted(keymap): + code, row_index = keymap[key_index] + if row_index != prev_row_index: + col = 0 + yield "\n" + if row_indents: + for indent_col in range(row_indents[row_index]): + pad = " " * (col_widths[indent_col] - 4) + yield (" /*-*/" + pad) + col = row_indents[row_index] + else: + yield pad + yield " {}".format(code) + if key_index < len(keymap) - 1: + yield "," + # This will be yielded on the next iteration when + # we know that we're not at the end of a line. + pad = " " * (col_widths[col] - len(code)) + prev_row_index = row_index + col += 1 + + +def iter_keymap_parts(config, keymaps): + # includes + for include_path in config['keymaps_includes']: + yield '#include "{}"\n'.format(include_path) + + yield "\n" + + # definitions + for i, macro_id in enumerate(sorted(config['macro_ids'])): + yield "#define {} {}\n".format(macro_id, i) + + yield "\n" + + for i, layer_name in enumerate(config['layer_lines']): + yield '#define L{0:<3} {0:<5} // {1}\n'.format(i, layer_name) + + yield "\n" + + # keymaps + yield "const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n" + + for i, layer_name in enumerate(config['layer_lines']): + # comment + layer_lines = config['layer_lines'][layer_name] + prefixed_lines = " * " + " * ".join(layer_lines) + yield "/*\n{} */\n".format(prefixed_lines) + + # keymap codes + keymap = keymaps[layer_name] + row_indents = ROW_INDENTS.get(config['layout']) + keymap_lines = "".join(iter_keymap_lines(keymap, row_indents)) + yield "[L{0}] = KEYMAP({1}\n),\n".format(i, keymap_lines) + + yield "};\n\n" + + # no idea what this is for + yield "const uint16_t PROGMEM fn_actions[] = {};\n" + + # macros + yield MACROCODE.format( + macro_cases="", + unicode_macro_cases="\n".join(unicode_macro_cases(config)), + ) + + # TODO: dynamically create blinking lights + yield USERCODE + + +def main(argv=sys.argv[1:]): + if not argv or '-h' in argv or '--help' in argv: + print(__doc__) + return 0 + + in_path = os.path.abspath(argv[0]) + if not os.path.exists(in_path): + print("No such file '{}'".format(in_path)) + return 1 + + if len(argv) > 1: + out_path = os.path.abspath(argv[1]) + else: + dirname = os.path.dirname(in_path) + out_path = os.path.join(dirname, "keymap.c") + + config = parse_config(in_path) + valid_keys = parse_valid_keys(config, out_path) + keymaps = parse_keymaps(config, valid_keys) + + with io.open(out_path, mode="w", encoding="utf-8") as fh: + for part in iter_keymap_parts(config, keymaps): + fh.write(part) + + +if __name__ == '__main__': + sys.exit(main()) diff --git a/keyboards/ergodox/ez/util/readme.md b/keyboards/ergodox/ez/util/readme.md new file mode 100644 index 000000000..26c5e5d99 --- /dev/null +++ b/keyboards/ergodox/ez/util/readme.md @@ -0,0 +1,3 @@ +# ErgoDox EZ Utilities + +The Python script in this directory, by [mbarkhau](https://github.com/mbarkhau) allows you to write out a basic ErgoDox EZ keymap using Markdown notation, and then transpile it to C, which you can then compile. It's experimental, but if you're not comfortable using C, it's a nice option. diff --git a/keyboards/ergodox/infinity/MEMO.txt b/keyboards/ergodox/infinity/MEMO.txt new file mode 100644 index 000000000..e2886aa00 --- /dev/null +++ b/keyboards/ergodox/infinity/MEMO.txt @@ -0,0 +1,385 @@ +flabbergast's TMK/ChibiOS port +============================== +2015/10/16 + + +Build +----- +$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git + +$ cd tmk_keyboard +$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios +or +$ cd tmk_keyboard/tmk_core/tool/chibios +$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios + +$ cd tmk_keyboard/keyboard/infinity_chibios +$ make + + + + +Chibios Configuration +--------------------- +halconf.h: for HAL configuration + placed in project directory + read in chibios/os/hal/hal.mk + included in chibios/os/hal/include/hal.h +mcuconf.h: for MCU configuration + placed in project directory + included in halconf.h + + +Chibios Term +------------ +PAL = Port Abstraction Layer + palWritePad + palReadPad + palSetPad + chibios/os/hal/include/pal.h + +LLD = Low Level Driver + + +Makefile +-------- + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = KL2x + + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <this_dir>/ld/ + MCU_LDSCRIPT = MKL26Z64 + + # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP = kl2x + + # Board: it should exist either in <chibios>/os/hal/boards/ + # or <this_dir>/boards + BOARD = PJRC_TEENSY_LC + + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + +halconf.h +--------- + + +mcuconf.h +--------- + + +chconf.h +-------- + + +ld script +--------- +--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900 ++++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900 +@@ -27,7 +27,8 @@ + { + flash0 : org = 0x00000000, len = 0xc0 + flashcfg : org = 0x00000400, len = 0x10 +- flash : org = 0x00000410, len = 64k - 0x410 ++ flash : org = 0x00000410, len = 62k - 0x410 ++ eeprom_emu : org = 0x0000F800, len = 2k + ram : org = 0x1FFFF800, len = 8k + } + +@@ -35,6 +36,10 @@ + __ram_size__ = LENGTH(ram); + __ram_end__ = __ram_start__ + __ram_size__; + ++__eeprom_workarea_start__ = ORIGIN(eeprom_emu); ++__eeprom_workarea_size__ = LENGTH(eeprom_emu); ++__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; ++ + SECTIONS + { + . = 0; + + + +Configuration/Startup for Infinity 60% +-------------------------------------- +Configuration: + + +Clock: +Inifinity + FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz + Clock dividor: + SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock + SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock + SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock + Internal reference clock: + MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL + MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable + FLL multipilication: + MCG_C4[DMX32] = 1 + MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz + +chibios/os/hal/ports/KINETIS/K20x/hal_lld.c + k20x_clock_init(): called in __early_init() defined in board.c + disable watchdog and configure clock + + configurable macros: + KINETIS_NO_INIT: whether init or not + KINETIS_MCG_MODE: clock mode + KINETIS_MCG_MODE_FEI + KINETIS_MCG_MODE_PEE + hal/ports/KINETIS/K20x/hal_lld.h + + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h + PALConfig pal_default_config + boardInit() + __early_init() + macro definitions for board infos, freq and mcu type + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c + +USB + + +Startup +------- + common/ports/ARMCMx/GCC/crt0_v[67]m.s + Reset_Handler: startup code + common/ports/ARMCMx/GCC/crt1.c + __core_init(): weak + __early_init(): weak + __late_init(): weak + __default_exit(): weak + called from Reset_Handler of crt0 + common/ports/ARMCMx/GCC/vector.c + common/ports/ARMCMx/GCC/ld/*.ld + +chibios/os/common/ports/ARMCMx/compilers/GCC/ +├── crt0_v6m.s +├── crt0_v7m.s +├── crt1.c +├── ld +│ ├── MK20DX128BLDR3.ld +│ ├── MK20DX128BLDR4.ld +│ ├── MK20DX128.ld +│ ├── MK20DX256.ld +│ ├── MKL25Z128.ld +│ ├── MKL26Z128.ld +│ ├── MKL26Z64.ld +│ └── STM32L476xG.ld +├── mk +│ ├── startup_k20x5.mk +│ ├── startup_k20x7.mk +│ ├── startup_k20x.mk +│ ├── startup_kl2x.mk +│ └── startup_stm32l4xx.mk +├── rules.ld +├── rules.mk +└── vectors.c + +chibios/os/hal/ +├── boards +│ ├── FREESCALE_FREEDOM_K20D50M +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── MCHCK_K20 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_3 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_3_1 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_LC +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── readme.txt +│ ├── simulator +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── ST_NUCLEO_F030R8 +│ │ ├── board.c +│ │ ├── board.h +│ │ ├── board.mk +│ │ └── cfg +│ │ └── board.chcfg +├── hal.mk +├── include +│ ├── adc.h +│ ├── can.h +│ ├── dac.h +│ ├── ext.h +│ ├── gpt.h +│ ├── hal_channels.h +│ ├── hal_files.h +│ ├── hal.h +│ ├── hal_ioblock.h +│ ├── hal_mmcsd.h +│ ├── hal_queues.h +│ ├── hal_streams.h +│ ├── i2c.h +│ ├── i2s.h +│ ├── icu.h +│ ├── mac.h +│ ├── mii.h +│ ├── mmc_spi.h +│ ├── pal.h +│ ├── pwm.h +│ ├── rtc.h +│ ├── sdc.h +│ ├── serial.h +│ ├── serial_usb.h +│ ├── spi.h +│ ├── st.h +│ ├── uart.h +│ └── usb.h +├── lib +│ └── streams +│ ├── chprintf.c +│ ├── chprintf.h +│ ├── memstreams.c +│ ├── memstreams.h +│ ├── nullstreams.c +│ └── nullstreams.h +├── osal +│ ├── nil +│ │ ├── osal.c +│ │ ├── osal.h +│ │ └── osal.mk +│ ├── os-less +│ │ └── ARMCMx +│ │ ├── osal.c +│ │ ├── osal.h +│ │ └── osal.mk +│ └── rt +│ ├── osal.c +│ ├── osal.h +│ └── osal.mk +├── ports +│ ├── AVR +│ ├── common +│ │ └── ARMCMx +│ │ ├── mpu.h +│ │ ├── nvic.c +│ │ └── nvic.h +│ ├── KINETIS +│ │ ├── K20x +│ │ │ ├── hal_lld.c +│ │ │ ├── hal_lld.h +│ │ │ ├── kinetis_registry.h +│ │ │ ├── platform.dox +│ │ │ ├── platform.mk +│ │ │ ├── pwm_lld.c +│ │ │ ├── pwm_lld.h +│ │ │ ├── spi_lld.c +│ │ │ └── spi_lld.h +│ │ ├── KL2x +│ │ │ ├── hal_lld.c +│ │ │ ├── hal_lld.h +│ │ │ ├── kinetis_registry.h +│ │ │ ├── platform.mk +│ │ │ ├── pwm_lld.c +│ │ │ └── pwm_lld.h +│ │ ├── LLD +│ │ │ ├── adc_lld.c +│ │ │ ├── adc_lld.h +│ │ │ ├── ext_lld.c +│ │ │ ├── ext_lld.h +│ │ │ ├── gpt_lld.c +│ │ │ ├── gpt_lld.h +│ │ │ ├── i2c_lld.c +│ │ │ ├── i2c_lld.h +│ │ │ ├── pal_lld.c +│ │ │ ├── pal_lld.h +│ │ │ ├── serial_lld.c +│ │ │ ├── serial_lld.h +│ │ │ ├── st_lld.c +│ │ │ ├── st_lld.h +│ │ │ ├── usb_lld.c +│ │ │ └── usb_lld.h +│ │ └── README.md +│ ├── LPC +│ ├── simulator +│ └── STM32 +├── src +│ ├── adc.c +│ ├── can.c +│ ├── dac.c +│ ├── ext.c +│ ├── gpt.c +│ ├── hal.c +│ ├── hal_mmcsd.c +│ ├── hal_queues.c +│ ├── i2c.c +│ ├── i2s.c +│ ├── icu.c +│ ├── mac.c +│ ├── mmc_spi.c +│ ├── pal.c +│ ├── pwm.c +│ ├── rtc.c +│ ├── sdc.c +│ ├── serial.c +│ ├── serial_usb.c +│ ├── spi.c +│ ├── st.c +│ ├── uart.c +│ └── usb.c +└── templates + ├── adc_lld.c + ├── adc_lld.h + ├── can_lld.c + ├── can_lld.h + ├── dac_lld.c + ├── dac_lld.h + ├── ext_lld.c + ├── ext_lld.h + ├── gpt_lld.c + ├── gpt_lld.h + ├── halconf.h + ├── hal_lld.c + ├── hal_lld.h + ├── i2c_lld.c + ├── i2c_lld.h + ├── i2s_lld.c + ├── i2s_lld.h + ├── icu_lld.c + ├── icu_lld.h + ├── mac_lld.c + ├── mac_lld.h + ├── mcuconf.h + ├── osal + │ ├── osal.c + │ ├── osal.h + │ └── osal.mk + ├── pal_lld.c + ├── pal_lld.h + ├── platform.mk + ├── pwm_lld.c + ├── pwm_lld.h + ├── rtc_lld.c + ├── rtc_lld.h + ├── sdc_lld.c + ├── sdc_lld.h + ├── serial_lld.c + ├── serial_lld.h + ├── spi_lld.c + ├── spi_lld.h + ├── st_lld.c + ├── st_lld.h + ├── uart_lld.c + ├── uart_lld.h + ├── usb_lld.c + └── usb_lld.h diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile new file mode 100644 index 000000000..ccb735a48 --- /dev/null +++ b/keyboards/ergodox/infinity/Makefile @@ -0,0 +1,77 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity 60% +# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox +MCU_STARTUP = k20x7 + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +#BOARD = MCHCK_K20 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 + +# Build Options +# comment out to disable the options. +# +CUSTOM_MATRIX ?= yes # Custom matrix file +SERIAL_LINK_ENABLE = yes +VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile +LCD_ENABLE ?= yes +LED_ENABLE ?= yes +LCD_BACKLIGHT_ENABLE ?= yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +ifdef LCD_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk +endif + +ifdef LED_ENABLE +include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +endif diff --git a/keyboards/ergodox/infinity/bootloader_defs.h b/keyboards/ergodox/infinity/bootloader_defs.h new file mode 100644 index 000000000..c67153be6 --- /dev/null +++ b/keyboards/ergodox/infinity/bootloader_defs.h @@ -0,0 +1 @@ +#define KIIBOHD_BOOTLOADER diff --git a/keyboards/ergodox/infinity/chconf.h b/keyboards/ergodox/infinity/chconf.h new file mode 100644 index 000000000..d59c35eb6 --- /dev/null +++ b/keyboards/ergodox/infinity/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h new file mode 100644 index 000000000..9e264083b --- /dev/null +++ b/keyboards/ergodox/infinity/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef INFINITY_ERGODOX_CONFIG_H +#define INFINITY_ERGODOX_CONFIG_H + +#include "../config.h" + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER "TMK" +#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00' +#define PRODUCT "Infinity keyboard/TMK" +#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' + +/* key matrix size */ +#define MATRIX_ROWS 18 +#define MATRIX_COLS 5 +#define LOCAL_MATRIX_ROWS 9 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_HI 255 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define SERIAL_LINK_BAUD 562500 +#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) +// The visualizer needs gfx thread priorities +#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h new file mode 100644 index 000000000..2ea73f1fb --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h @@ -0,0 +1,113 @@ +/* +Copyright 2016 Fred Sundvik <fsundvik@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +#define GDISP_SCREEN_WIDTH 7 +#define GDISP_SCREEN_HEIGHT 7 + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0x3F, 0x00, /* C5-1 -> C5-16 */ + 0x00, 0x00, /* C6-1 -> C6-16 */ + 0x00, 0x00, /* C7-1 -> C7-16 */ + 0x00, 0x00, /* C8-1 -> C8-16 */ + 0x00, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 45 44 43 42 41 40 39 + { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, +// 52 51 50 49 48 47 46 + { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, +// 58 57 56 55 54 53 N/A + { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, +// 67 66 65 64 63 62 61 + { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, +// 76 75 74 73 72 60 59 + { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, +// N/A N/A N/A N/A N/A N/A 68 + { NA, NA, NA, NA, NA, NA, LA(5, 4) }, +// N/A N/A N/A N/A 71 70 69 + { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk new file mode 100644 index 000000000..f32d0d868 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/IS31FL3731C +GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c new file mode 100644 index 000000000..1d21f0c49 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c @@ -0,0 +1,333 @@ +/* +Copyright 2016 Fred Sundvik <fsundvik@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX +#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_IS31FL3731C.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 9 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 16 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#define IS31_ADDR_DEFAULT 0x74 + +#define IS31_REG_CONFIG 0x00 +// bits in reg +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 +// D2:D0 bits are starting frame for autoplay mode + +#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode + +#define IS31_REG_AUTOPLAYCTRL1 0x02 +// D6:D4 number of loops (000=infty) +// D2:D0 number of frames to be used + +#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) + +#define IS31_REG_DISPLAYOPT 0x05 +#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames +#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 +// D2:D0 bits blink period time (*0.27s) + +#define IS31_REG_AUDIOSYNC 0x06 +#define IS31_REG_AUDIOSYNC_ENABLE 0x1 + +#define IS31_REG_FRAMESTATE 0x07 + +#define IS31_REG_BREATHCTRL1 0x08 +// D6:D4 fade out time (26ms*2^i) +// D2:D0 fade in time (26ms*2^i) + +#define IS31_REG_BREATHCTRL2 0x09 +#define IS31_REG_BREATHCTRL2_ENABLE 0x10 +// D2:D0 extinguish time (3.5ms*2^i) + +#define IS31_REG_SHUTDOWN 0x0A +#define IS31_REG_SHUTDOWN_OFF 0x0 +#define IS31_REG_SHUTDOWN_ON 0x1 + +#define IS31_REG_AGCCTRL 0x0B +#define IS31_REG_ADCRATE 0x0C + +#define IS31_COMMANDREGISTER 0xFD +#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define IS31_FUNCTIONREG_SIZE 0xD + +#define IS31_FRAME_SIZE 0xB4 + +#define IS31_PWM_REG 0x24 +#define IS31_PWM_SIZE 0x90 + +#define IS31_LED_MASK_SIZE 0x12 +#define IS31_SCREEN_WIDTH 16 + +#define IS31 + +//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm +const unsigned char cie[256] = { + 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, + 3, 4, 4, 4, 4, 4, 4, 5, 5, 5, + 5, 5, 6, 6, 6, 6, 6, 7, 7, 7, + 7, 8, 8, 8, 8, 9, 9, 9, 10, 10, + 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, + 13, 14, 14, 15, 15, 15, 16, 16, 17, 17, + 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, + 22, 23, 23, 24, 24, 25, 25, 26, 26, 27, + 28, 28, 29, 29, 30, 31, 31, 32, 32, 33, + 34, 34, 35, 36, 37, 37, 38, 39, 39, 40, + 41, 42, 43, 43, 44, 45, 46, 47, 47, 48, + 49, 50, 51, 52, 53, 54, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 70, 71, 72, 73, 74, 75, 76, 77, 79, + 80, 81, 82, 83, 85, 86, 87, 88, 90, 91, + 92, 94, 95, 96, 98, 99, 100, 102, 103, 105, + 106, 108, 109, 110, 112, 113, 115, 116, 118, 120, + 121, 123, 124, 126, 128, 129, 131, 132, 134, 136, + 138, 139, 141, 143, 145, 146, 148, 150, 152, 154, + 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, + 175, 177, 179, 181, 183, 185, 187, 189, 191, 193, + 196, 198, 200, 202, 204, 207, 209, 211, 214, 216, + 218, 220, 223, 225, 228, 230, 232, 235, 237, 240, + 242, 245, 247, 250, 252, 255, +}; + + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + uint8_t write_buffer_offset; + uint8_t write_buffer[IS31_FRAME_SIZE]; + uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; + uint8_t page; +}__attribute__((__packed__)) PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +static GFXINLINE void write_page(GDisplay* g, uint8_t page) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = IS31_COMMANDREGISTER; + tx[1] = page; + write_data(g, tx, 2); +} + +static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = reg; + tx[1] = data; + write_page(g, page); + write_data(g, tx, 2); +} + +static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { + PRIV(g)->write_buffer_offset = offset; + write_page(g, page); + write_data(g, (uint8_t*)PRIV(g), length + 1); +} + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + __builtin_memset(PRIV(g), 0, sizeof(PrivData)); + PRIV(g)->page = 0; + + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); + + // zero function page, all registers (assuming full_page is all zeroes) + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + set_hardware_shutdown(g, false); + gfxSleepMilliseconds(10); + // software shutdown + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + // zero function page, all registers + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + gfxSleepMilliseconds(10); + + + // zero all LED registers on all 8 pages, and enable the mask + __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); + for(uint8_t i=0; i<8; i++) { + write_ram(g, i, 0, IS31_FRAME_SIZE); + gfxSleepMilliseconds(1); + } + + // software shutdown disable (i.e. turn stuff on) + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + gfxSleepMilliseconds(10); + + // Finish Init + post_init_board(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOn; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { + for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { + PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src]; + ++src; + } + } + write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); + gfxSleepMilliseconds(1); + write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + break; + case powerOn: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h new file mode 100644 index 000000000..bb28ad775 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h @@ -0,0 +1,36 @@ +/* +Copyright 2016 Fred Sundvik <fsundvik@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk new file mode 100644 index 000000000..16c3f80f5 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/emulator_lcd +GFXSRC += drivers/gdisp/emulator_lcd/emulator_lcd.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c new file mode 100644 index 000000000..babfe2b36 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c @@ -0,0 +1,10 @@ +#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LCD_ERGODOX +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO +#define GDISP_SCREEN_WIDTH 128 +#define GDISP_SCREEN_HEIGHT 32 +#define ROTATE_180_IS_FLIP + +#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk new file mode 100644 index 000000000..255434432 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/emulator_led +GFXSRC += drivers/gdisp/emulator_led/emulator_led.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c new file mode 100644 index 000000000..b0ebcdc47 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c @@ -0,0 +1,10 @@ +#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LED_ERGODOX +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO +#define GDISP_SCREEN_WIDTH 7 +#define GDISP_SCREEN_HEIGHT 7 +#define ROTATE_180_IS_FLIP + +#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h new file mode 100644 index 000000000..290571ce5 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h @@ -0,0 +1,127 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#include "print.h" + +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 +#define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC +#define ST7565_PAGE_ORDER 0,1,2,3 +/* + * Custom page order for several LCD boards, e.g. HEM12864-99 + * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 + */ + +#define ST7565_GPIOPORT GPIOC +#define ST7565_PORT PORTC +#define ST7565_A0_PIN 7 +#define ST7565_RST_PIN 8 +#define ST7565_MOSI_PIN 6 +#define ST7565_SLCK_PIN 5 +#define ST7565_SS_PIN 4 + +#define palSetPadModeRaw(portname, bits) \ + ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits + +#define palSetPadModeNamed(portname, portmode) \ + palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) + +#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) +// DSPI Clock and Transfer Attributes +// Frame Size: 8 bits +// MSB First +// CLK Low by default +static const SPIConfig spi1config = { + NULL, + /* HW dependent part.*/ + ST7565_GPIOPORT, + ST7565_SS_PIN, + SPIx_CTARn_FMSZ(7) + | SPIx_CTARn_ASC(7) + | SPIx_CTARn_DT(7) + | SPIx_CTARn_CSSCK(7) + | SPIx_CTARn_PBR(0) + | SPIx_CTARn_BR(7) + //SPI_CR1_BR_0 +}; + +static bool_t st7565_is_data_mode = 1; + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + st7565_is_data_mode = 1; + palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + palSetPadModeRaw(MOSI, ST7565_SPI_MODE); + palSetPadModeRaw(SLCK, ST7565_SPI_MODE); + palSetPadModeRaw(SS, ST7565_SPI_MODE); + + spiInit(); + spiStart(&SPID1, &spi1config); + spiSelect(&SPID1); +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } + else { + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } +} + +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); +} + +static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { + (void) g; + if (st7565_is_data_mode) { + // The sleeps need to be at lest 10 vs 25 ns respectively + // So let's sleep two ticks, one tick might not be enough + // if we are at the end of the tick + chThdSleep(2); + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); + chThdSleep(2); + st7565_is_data_mode = 0; + } + spiSend(&SPID1, 1, &cmd); +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + if (!st7565_is_data_mode) { + // The sleeps need to be at lest 10 vs 25 ns respectively + // So let's sleep two ticks, one tick might not be enough + // if we are at the end of the tick + chThdSleep(2); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + chThdSleep(2); + st7565_is_data_mode = 1; + } + spiSend(&SPID1, length, data); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk new file mode 100644 index 000000000..889a1a031 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/st7565ergodox +GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c new file mode 100644 index 000000000..c33aea81a --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c @@ -0,0 +1,292 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX +#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_ST7565.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 32 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 128 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#include "drivers/gdisp/st7565ergodox/st7565.h" + +/*===========================================================================*/ +/* Driver config defaults for backward compatibility. */ +/*===========================================================================*/ +#ifndef ST7565_LCD_BIAS + #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 +#endif +#ifndef ST7565_ADC + #define ST7565_ADC ST7565_ADC_NORMAL +#endif +#ifndef ST7565_COM_SCAN + #define ST7565_COM_SCAN ST7565_COM_SCAN_INC +#endif +#ifndef ST7565_PAGE_ORDER + #define ST7565_PAGE_ORDER 0,1,2,3 +#endif + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + bool_t buffer2; + uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; +}PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) +#define RAM(g) (PRIV(g)->ram) +#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } +#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } + +// Some common routines and macros +#define delay(us) gfxSleepMicroseconds(us) +#define delay_ms(ms) gfxSleepMilliseconds(ms) + +#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) +#define xybit(y) (1<<((y)&7)) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/* + * As this controller can't update on a pixel boundary we need to maintain the + * the entire display surface in memory so that we can do the necessary bit + * operations. Fortunately it is a small display in monochrome. + * 64 * 128 / 8 = 1024 bytes. + */ + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + PRIV(g)->buffer2 = false; + + // Initialise the board interface + init_board(g); + + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_OFF); + write_cmd(g, ST7565_LCD_BIAS); + write_cmd(g, ST7565_ADC); + write_cmd(g, ST7565_COM_SCAN); + + write_cmd(g, ST7565_START_LINE | 0); + + write_cmd(g, ST7565_RESISTOR_RATIO | 0x6); + + // turn on voltage converter (VC=1, VR=0, VF=0) + write_cmd(g, ST7565_POWER_CONTROL | 0x04); + delay_ms(50); + + // turn on voltage regulator (VC=1, VR=1, VF=0) + write_cmd(g, ST7565_POWER_CONTROL | 0x06); + delay_ms(50); + + // turn on voltage follower (VC=1, VR=1, VF=1) + write_cmd(g, ST7565_POWER_CONTROL | 0x07); + delay_ms(50); + + write_cmd(g, 0xE2); + write_cmd(g, ST7565_COM_SCAN); + write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101); + //write_cmd2(g, ST7565_CONTRAST, 0); + write_cmd(g, ST7565_DISPLAY_ON); + write_cmd(g, ST7565_ALLON_NORMAL); + write_cmd(g, ST7565_INVERT_DISPLAY); + + write_cmd(g, ST7565_RMW); + + // Finish Init + post_init_board(g); + + // Release the bus + release_bus(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOn; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + unsigned p; + + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + acquire_bus(g); + unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); + for (p = 0; p < 4; p++) { + write_cmd(g, ST7565_PAGE | (p + dstOffset)); + write_cmd(g, ST7565_COLUMN_MSB | 0); + write_cmd(g, ST7565_COLUMN_LSB | 0); + write_cmd(g, ST7565_RMW); + write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); + } + unsigned line = (PRIV(g)->buffer2 ? 32 : 0); + write_cmd(g, ST7565_START_LINE | line); + PRIV(g)->buffer2 = !PRIV(g)->buffer2; + release_bus(g); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + if (gdispColor2Native(g->p.color) != Black) + RAM(g)[xyaddr(x, y)] |= xybit(y); + else + RAM(g)[xyaddr(x, y)] &= ~xybit(y); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_OFF); + release_bus(g); + break; + case powerOn: + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_ON); + release_bus(g); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + if ((unsigned)g->p.ptr > 100) + g->p.ptr = (void *)100; + acquire_bus(g); + write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F); + release_bus(g); + g->g.Contrast = (unsigned)g->p.ptr; + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h new file mode 100644 index 000000000..48587b9e1 --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h new file mode 100644 index 000000000..48636b33d --- /dev/null +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _ST7565_H +#define _ST7565_H + +#define ST7565_CONTRAST 0x81 +#define ST7565_ALLON_NORMAL 0xA4 +#define ST7565_ALLON 0xA5 +#define ST7565_POSITIVE_DISPLAY 0xA6 +#define ST7565_INVERT_DISPLAY 0xA7 +#define ST7565_DISPLAY_OFF 0xAE +#define ST7565_DISPLAY_ON 0xAF + +#define ST7565_LCD_BIAS_7 0xA3 +#define ST7565_LCD_BIAS_9 0xA2 + +#define ST7565_ADC_NORMAL 0xA0 +#define ST7565_ADC_REVERSE 0xA1 + +#define ST7565_COM_SCAN_INC 0xC0 +#define ST7565_COM_SCAN_DEC 0xC8 + +#define ST7565_START_LINE 0x40 +#define ST7565_PAGE 0xB0 +#define ST7565_COLUMN_MSB 0x10 +#define ST7565_COLUMN_LSB 0x00 +#define ST7565_RMW 0xE0 + +#define ST7565_RESISTOR_RATIO 0x20 +#define ST7565_POWER_CONTROL 0x28 + +#endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h new file mode 100644 index 000000000..8caa577b7 --- /dev/null +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -0,0 +1,331 @@ +/** + * This file has a different license to the rest of the uGFX system. + * You can copy, modify and distribute this file as you see fit. + * You do not need to publish your source modifications to this file. + * The only thing you are not permitted to do is to relicense it + * under a different license. + */ + +/** + * Copy this file into your project directory and rename it as gfxconf.h + * Edit your copy to turn on the uGFX features you want to use. + * The values below are the defaults. + * + * Only remove the comments from lines where you want to change the + * default value. This allows definitions to be included from + * driver makefiles when required and provides the best future + * compatibility for your project. + * + * Please use spaces instead of tabs in this file. + */ + +#ifndef _GFXCONF_H +#define _GFXCONF_H + + +/////////////////////////////////////////////////////////////////////////// +// GOS - One of these must be defined, preferably in your Makefile // +/////////////////////////////////////////////////////////////////////////// +//#define GFX_USE_OS_CHIBIOS TRUE +//#define GFX_USE_OS_FREERTOS FALSE +// #define GFX_FREERTOS_USE_TRACE FALSE +//#define GFX_USE_OS_WIN32 FALSE +//#define GFX_USE_OS_LINUX FALSE +//#define GFX_USE_OS_OSX FALSE +//#define GFX_USE_OS_ECOS FALSE +//#define GFX_USE_OS_RAWRTOS FALSE +//#define GFX_USE_OS_ARDUINO FALSE +//#define GFX_USE_OS_KEIL FALSE +//#define GFX_USE_OS_CMSIS FALSE +//#define GFX_USE_OS_RAW32 FALSE +// #define INTERRUPTS_OFF() optional_code +// #define INTERRUPTS_ON() optional_code +// These are not defined by default for some reason +#define GOS_NEED_X_THREADS FALSE +#define GOS_NEED_X_HEAP FALSE + +// Options that (should where relevant) apply to all operating systems + #define GFX_NO_INLINE FALSE +// #define GFX_COMPILER GFX_COMPILER_UNKNOWN +// #define GFX_CPU GFX_CPU_UNKNOWN +// #define GFX_OS_HEAP_SIZE 0 +// #define GFX_OS_NO_INIT FALSE +// #define GFX_OS_INIT_NO_WARNING FALSE +// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine +// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine +// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine + + +/////////////////////////////////////////////////////////////////////////// +// GDISP // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GDISP TRUE + +//#define GDISP_NEED_AUTOFLUSH FALSE +//#define GDISP_NEED_TIMERFLUSH FALSE +//#define GDISP_NEED_VALIDATION TRUE +//#define GDISP_NEED_CLIP TRUE +#define GDISP_NEED_CIRCLE TRUE +#define GDISP_NEED_ELLIPSE TRUE +#define GDISP_NEED_ARC TRUE +#define GDISP_NEED_ARCSECTORS TRUE +#define GDISP_NEED_CONVEX_POLYGON TRUE +//#define GDISP_NEED_SCROLL FALSE +#define GDISP_NEED_PIXELREAD TRUE +#define GDISP_NEED_CONTROL TRUE +//#define GDISP_NEED_QUERY FALSE +//#define GDISP_NEED_MULTITHREAD FALSE +//#define GDISP_NEED_STREAMING FALSE +#define GDISP_NEED_TEXT TRUE +// #define GDISP_NEED_TEXT_WORDWRAP FALSE +// #define GDISP_NEED_ANTIALIAS FALSE +// #define GDISP_NEED_UTF8 FALSE + #define GDISP_NEED_TEXT_KERNING TRUE +// #define GDISP_INCLUDE_FONT_UI1 FALSE +// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. +// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE + #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE +// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE +// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE + #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE +// #define GDISP_INCLUDE_USER_FONTS FALSE + +//#define GDISP_NEED_IMAGE FALSE +// #define GDISP_NEED_IMAGE_NATIVE FALSE +// #define GDISP_NEED_IMAGE_GIF FALSE +// #define GDISP_NEED_IMAGE_BMP FALSE +// #define GDISP_NEED_IMAGE_BMP_1 FALSE +// #define GDISP_NEED_IMAGE_BMP_4 FALSE +// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_8 FALSE +// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_16 FALSE +// #define GDISP_NEED_IMAGE_BMP_24 FALSE +// #define GDISP_NEED_IMAGE_BMP_32 FALSE +// #define GDISP_NEED_IMAGE_JPG FALSE +// #define GDISP_NEED_IMAGE_PNG FALSE +// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE +#ifdef EMULATOR +#define GDISP_NEED_PIXMAP TRUE +#endif +// #define GDISP_NEED_PIXMAP_IMAGE FALSE + +//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. +//#define GDISP_LINEBUF_SIZE 128 +//#define GDISP_STARTUP_COLOR Black +#define GDISP_NEED_STARTUP_LOGO FALSE + +//#define GDISP_TOTAL_DISPLAYS 2 + +#ifndef EMULATOR +#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX +#else +#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX +#endif + + #ifdef GDISP_DRIVER_LIST + // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability + #define GDISP_HARDWARE_STREAM_WRITE FALSE + #define GDISP_HARDWARE_STREAM_READ FALSE + #define GDISP_HARDWARE_STREAM_POS FALSE + #define GDISP_HARDWARE_DRAWPIXEL TRUE + #define GDISP_HARDWARE_CLEARS FALSE + #define GDISP_HARDWARE_FILLS FALSE + #define GDISP_HARDWARE_BITFILLS FALSE + #define GDISP_HARDWARE_SCROLL FALSE + #define GDISP_HARDWARE_PIXELREAD TRUE + #define GDISP_HARDWARE_CONTROL TRUE + #define GDISP_HARDWARE_QUERY FALSE + #define GDISP_HARDWARE_CLIP FALSE + + #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 + #endif + +// The custom format is not defined for some reason, so define it as error +// so we don't get compiler warnings +#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR + +#define GDISP_USE_GFXNET FALSE +// #define GDISP_GFXNET_PORT 13001 +// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE +// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE +// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GWIN // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GWIN FALSE + +//#define GWIN_NEED_WINDOWMANAGER FALSE +// #define GWIN_REDRAW_IMMEDIATE FALSE +// #define GWIN_REDRAW_SINGLEOP FALSE +// #define GWIN_NEED_FLASHING FALSE +// #define GWIN_FLASHING_PERIOD 250 + +//#define GWIN_NEED_CONSOLE FALSE +// #define GWIN_CONSOLE_USE_HISTORY FALSE +// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE +// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE +// #define GWIN_CONSOLE_ESCSEQ FALSE +// #define GWIN_CONSOLE_USE_BASESTREAM FALSE +// #define GWIN_CONSOLE_USE_FLOAT FALSE +//#define GWIN_NEED_GRAPH FALSE +//#define GWIN_NEED_GL3D FALSE + +//#define GWIN_NEED_WIDGET FALSE +//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 +// #define GWIN_NEED_LABEL FALSE +// #define GWIN_LABEL_ATTRIBUTE FALSE +// #define GWIN_NEED_BUTTON FALSE +// #define GWIN_BUTTON_LAZY_RELEASE FALSE +// #define GWIN_NEED_SLIDER FALSE +// #define GWIN_SLIDER_NOSNAP FALSE +// #define GWIN_SLIDER_DEAD_BAND 5 +// #define GWIN_SLIDER_TOGGLE_INC 20 +// #define GWIN_NEED_CHECKBOX FALSE +// #define GWIN_NEED_IMAGE FALSE +// #define GWIN_NEED_IMAGE_ANIMATION FALSE +// #define GWIN_NEED_RADIO FALSE +// #define GWIN_NEED_LIST FALSE +// #define GWIN_NEED_LIST_IMAGES FALSE +// #define GWIN_NEED_PROGRESSBAR FALSE +// #define GWIN_PROGRESSBAR_AUTO FALSE +// #define GWIN_NEED_KEYBOARD FALSE +// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 +// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE +// #define GWIN_NEED_TEXTEDIT FALSE +// #define GWIN_FLAT_STYLING FALSE +// #define GWIN_WIDGET_TAGS FALSE + +//#define GWIN_NEED_CONTAINERS FALSE +// #define GWIN_NEED_CONTAINER FALSE +// #define GWIN_NEED_FRAME FALSE +// #define GWIN_NEED_TABSET FALSE +// #define GWIN_TABSET_TABHEIGHT 18 + + +/////////////////////////////////////////////////////////////////////////// +// GEVENT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GEVENT TRUE + +//#define GEVENT_ASSERT_NO_RESOURCE FALSE +//#define GEVENT_MAXIMUM_SIZE 32 +//#define GEVENT_MAX_SOURCE_LISTENERS 32 + + +/////////////////////////////////////////////////////////////////////////// +// GTIMER // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GTIMER FALSE + +//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY +//#define GTIMER_THREAD_WORKAREA_SIZE 2048 + + +/////////////////////////////////////////////////////////////////////////// +// GQUEUE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GQUEUE FALSE + +//#define GQUEUE_NEED_ASYNC FALSE +//#define GQUEUE_NEED_GSYNC FALSE +//#define GQUEUE_NEED_FSYNC FALSE +//#define GQUEUE_NEED_BUFFERS FALSE + +/////////////////////////////////////////////////////////////////////////// +// GINPUT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GINPUT FALSE + +//#define GINPUT_NEED_MOUSE FALSE +// #define GINPUT_TOUCH_STARTRAW FALSE +// #define GINPUT_TOUCH_NOTOUCH FALSE +// #define GINPUT_TOUCH_NOCALIBRATE FALSE +// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE +// #define GINPUT_MOUSE_POLL_PERIOD 25 +// #define GINPUT_MOUSE_CLICK_TIME 300 +// #define GINPUT_TOUCH_CXTCLICK_TIME 700 +// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE +// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE +// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 +//#define GINPUT_NEED_KEYBOARD FALSE +// #define GINPUT_KEYBOARD_POLL_PERIOD 200 +// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 +// #define GKEYBOARD_LAYOUT_OFF FALSE +// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE +//#define GINPUT_NEED_TOGGLE FALSE +//#define GINPUT_NEED_DIAL FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GFILE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GFILE FALSE + +//#define GFILE_NEED_PRINTG FALSE +//#define GFILE_NEED_SCANG FALSE +//#define GFILE_NEED_STRINGS FALSE +//#define GFILE_NEED_FILELISTS FALSE +//#define GFILE_NEED_STDIO FALSE +//#define GFILE_NEED_NOAUTOMOUNT FALSE +//#define GFILE_NEED_NOAUTOSYNC FALSE + +//#define GFILE_NEED_MEMFS FALSE +//#define GFILE_NEED_ROMFS FALSE +//#define GFILE_NEED_RAMFS FALSE +//#define GFILE_NEED_FATFS FALSE +//#define GFILE_NEED_NATIVEFS FALSE +//#define GFILE_NEED_CHBIOSFS FALSE + +//#define GFILE_ALLOW_FLOATS FALSE +//#define GFILE_ALLOW_DEVICESPECIFIC FALSE +//#define GFILE_MAX_GFILES 3 + +/////////////////////////////////////////////////////////////////////////// +// GADC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GADC FALSE + +//#define GADC_MAX_LOWSPEED_DEVICES 4 + + +/////////////////////////////////////////////////////////////////////////// +// GAUDIO // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GAUDIO FALSE +// There seems to be a bug in the ugfx code, the wrong define is used +// So define it in order to avoid warnings +#define GFX_USE_GAUDIN GFX_USE_GAUDIO +// #define GAUDIO_NEED_PLAY FALSE +// #define GAUDIO_NEED_RECORD FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GMISC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GMISC TRUE + +//#define GMISC_NEED_ARRAYOPS FALSE +//#define GMISC_NEED_FASTTRIG FALSE +//#define GMISC_NEED_FIXEDTRIG FALSE +//#define GMISC_NEED_INVSQRT FALSE +// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE +// #define GMISC_INVSQRT_REAL_SLOW FALSE +#define GMISC_NEED_MATRIXFLOAT2D TRUE +#define GMISC_NEED_MATRIXFIXED2D FALSE + +#endif /* _GFXCONF_H */ diff --git a/keyboards/ergodox/infinity/halconf.h b/keyboards/ergodox/infinity/halconf.h new file mode 100644 index 000000000..55dd5e88d --- /dev/null +++ b/keyboards/ergodox/infinity/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 128 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c new file mode 100644 index 000000000..f89e046d0 --- /dev/null +++ b/keyboards/ergodox/infinity/infinity.c @@ -0,0 +1,132 @@ +#include "infinity.h" +#include "ch.h" +#include "hal.h" +#include "serial_link/system/serial_link.h" +#ifdef VISUALIZER_ENABLE +#include "lcd_backlight.h" +#endif + +void init_serial_link_hal(void) { + PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); + PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); + PORTE->PCR[0] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(3); + PORTE->PCR[1] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(3); +} + +#define RED_PIN 1 +#define GREEN_PIN 2 +#define BLUE_PIN 3 +#define CHANNEL_RED FTM0->CHANNEL[0] +#define CHANNEL_GREEN FTM0->CHANNEL[1] +#define CHANNEL_BLUE FTM0->CHANNEL[2] + +#define RGB_PORT PORTC +#define RGB_PORT_GPIO GPIOC + +// Base FTM clock selection (72 MHz system clock) +// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period +// Higher pre-scalar will use the most power (also look the best) +// Pre-scalar calculations +// 0 - 72 MHz -> 549 Hz +// 1 - 36 MHz -> 275 Hz +// 2 - 18 MHz -> 137 Hz +// 3 - 9 MHz -> 69 Hz (Slightly visible flicker) +// 4 - 4 500 kHz -> 34 Hz (Visible flickering) +// 5 - 2 250 kHz -> 17 Hz +// 6 - 1 125 kHz -> 9 Hz +// 7 - 562 500 Hz -> 4 Hz +// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced +// Which will reduce the brightness range +#define PRESCALAR_DEFINE 0 +#ifdef VISUALIZER_ENABLE +void lcd_backlight_hal_init(void) { + // Setup Backlight + SIM->SCGC6 |= SIM_SCGC6_FTM0; + FTM0->CNT = 0; // Reset counter + + // PWM Period + // 16-bit maximum + FTM0->MOD = 0xFFFF; + + // Set FTM to PWM output - Edge Aligned, Low-true pulses +#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) + CHANNEL_RED.CnSC = CNSC_MODE; + CHANNEL_GREEN.CnSC = CNSC_MODE; + CHANNEL_BLUE.CnSC = CNSC_MODE; + + // System clock, /w prescalar setting + FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); + + CHANNEL_RED.CnV = 0; + CHANNEL_GREEN.CnV = 0; + CHANNEL_BLUE.CnV = 0; + + RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); + RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); + RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); + +#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) + RGB_PORT->PCR[RED_PIN] = RGB_MODE; + RGB_PORT->PCR[GREEN_PIN] = RGB_MODE; + RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; +} + +void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { + CHANNEL_RED.CnV = r; + CHANNEL_GREEN.CnV = g; + CHANNEL_BLUE.CnV = b; +} +#endif + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +void ergodox_board_led_on(void){ +} + +void ergodox_right_led_1_on(void){ +} + +void ergodox_right_led_2_on(void){ +} + +void ergodox_right_led_3_on(void){ +} + +void ergodox_right_led_on(uint8_t led){ +} + +void ergodox_board_led_off(void){ +} + +void ergodox_right_led_1_off(void){ +} + +void ergodox_right_led_2_off(void){ +} + +void ergodox_right_led_3_off(void){ +} + +void ergodox_right_led_off(uint8_t led){ +} diff --git a/keyboards/ergodox/infinity/infinity.h b/keyboards/ergodox/infinity/infinity.h new file mode 100644 index 000000000..fec9e565c --- /dev/null +++ b/keyboards/ergodox/infinity/infinity.h @@ -0,0 +1,110 @@ +#ifndef KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ +#define KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ + +#include "quantum.h" + +void ergodox_board_led_on(void); +void ergodox_right_led_1_on(void); +void ergodox_right_led_2_on(void); +void ergodox_right_led_3_on(void); +void ergodox_right_led_on(uint8_t led); + +void ergodox_board_led_off(void); +void ergodox_right_led_1_off(void); +void ergodox_right_led_2_off(void); +void ergodox_right_led_3_off(void); +void ergodox_right_led_off(uint8_t led); + +inline void ergodox_led_all_on(void) +{ + ergodox_board_led_on(); + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); +} + +inline void ergodox_led_all_off(void) +{ + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +} + +inline void ergodox_right_led_1_set(uint8_t n){ + if (n) { + ergodox_right_led_1_on(); + } else { + ergodox_right_led_1_off(); + } +} + +inline void ergodox_right_led_2_set(uint8_t n){ + if (n) { + ergodox_right_led_2_on(); + } else { + ergodox_right_led_2_off(); + } +} + +inline void ergodox_right_led_3_set(uint8_t n){ + if (n) { + ergodox_right_led_3_on(); + } else { + ergodox_right_led_3_off(); + } +} + +inline void ergodox_right_led_set(uint8_t led, uint8_t n){ + if (n) { + ergodox_right_led_on(led); + } else { + ergodox_right_led_off(led); + } +} + +inline void ergodox_led_all_set(uint8_t n) { + ergodox_right_led_1_set(n); + ergodox_right_led_2_set(n); + ergodox_right_led_3_set(n); +} + +#define KEYMAP( \ + A80, A70, A60, A50, A40, A30, A20, \ + A81, A71, A61, A51, A41, A31, A21, \ + A82, A72, A62, A52, A42, A32, \ + A83, A73, A63, A53, A43, A33, A23, \ + A84, A74, A64, A54, A44, \ + A13, A03, \ + A04, \ + A34, A24, A14, \ + B20, B30, B40, B50, B60, B70, B80, \ + B21, B31, B41, B51, B61, B71, B81, \ + B32, B42, B52, B62, B72, B82, \ + B23, B33, B43, B53, B63, B73, B83, \ + B44, B54, B64, B74, B84, \ + B03, B13, \ + B04, \ + B14, B24, B34 \ +) { \ + { KC_NO, KC_NO, KC_NO, A03, A04 }, \ + { KC_NO, KC_NO, KC_NO, A13, A14 }, \ + { A20, A21, KC_NO, A23, A24 }, \ + { A30, A31, A32, A33, A34 }, \ + { A40, A41, A42, A43, A44 }, \ + { A50, A51, A52, A53, A54 }, \ + { A60, A61, A62, A63, A64 }, \ + { A70, A71, A72, A73, A74 }, \ + { A80, A81, A82, A83, A84 }, \ + { KC_NO, KC_NO, KC_NO, B03, B04 }, \ + { KC_NO, KC_NO, KC_NO, B13, B14 }, \ + { B20, B21, KC_NO, B23, B24 }, \ + { B30, B31, B32, B33, B34 }, \ + { B40, B41, B42, B43, B44 }, \ + { B50, B51, B52, B53, B54 }, \ + { B60, B61, B62, B63, B64 }, \ + { B70, B71, B72, B73, B74 }, \ + { B80, B81, B82, B83, B84 } \ +} + +#endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */ diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c new file mode 100644 index 000000000..77195bb35 --- /dev/null +++ b/keyboards/ergodox/infinity/led.c @@ -0,0 +1,49 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) { +// The LCD backlight functionality conflicts with this simple +// red backlight +#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) + // PTC1: LCD Backlight Red(0:on/1:off) + GPIOC->PDDR |= (1<<1); + PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + GPIOC->PCOR |= (1<<1); + } else { + GPIOC->PSOR |= (1<<1); + } +#elif !defined(LCD_BACKLIGHT_ENABLE) + (void)usb_led; + GPIOC->PDDR |= (1<<1); + PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<1); + GPIOC->PDDR |= (1<<2); + PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<2); + GPIOC->PDDR |= (1<<3); + PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<3); +#else + (void)usb_led; +#endif +} diff --git a/keyboards/ergodox/infinity/matrix.c b/keyboards/ergodox/infinity/matrix.c new file mode 100644 index 000000000..1fda90484 --- /dev/null +++ b/keyboards/ergodox/infinity/matrix.c @@ -0,0 +1,172 @@ +/* +Copyright 2016 Fred Sundvik <fsundvik@gmail.com> +Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "matrix.h" + + +/* + * Infinity ErgoDox Pinusage: + * Column pins are input with internal pull-down. Row pins are output and strobe with high. + * Key is high or 1 when it turns on. + * + * col: { PTD1, PTD4, PTD5, PTD6, PTD7 } + * row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC9, PTC10, PTC11, PTD0 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[LOCAL_MATRIX_ROWS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + + +void matrix_init(void) +{ + /* Column(sense) */ + palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); + + /* Row(strobe) */ + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); + + memset(matrix, 0, MATRIX_ROWS); + memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { + matrix_row_t data = 0; + + // strobe row + switch (row) { + case 0: palSetPad(GPIOB, 2); break; + case 1: palSetPad(GPIOB, 3); break; + case 2: palSetPad(GPIOB, 18); break; + case 3: palSetPad(GPIOB, 19); break; + case 4: palSetPad(GPIOC, 0); break; + case 5: palSetPad(GPIOC, 9); break; + case 6: palSetPad(GPIOC, 10); break; + case 7: palSetPad(GPIOC, 11); break; + case 8: palSetPad(GPIOD, 0); break; + } + + // need wait to settle pin state + // if you wait too short, or have a too high update rate + // the keyboard might freeze, or there might not be enough + // processing power to update the LCD screen properly. + // 20us, or two ticks at 100000Hz seems to be OK + wait_us(20); + + // read col data: { PTD1, PTD4, PTD5, PTD6, PTD7 } + data = ((palReadPort(GPIOD) & 0xF0) >> 3) | + ((palReadPort(GPIOD) & 0x02) >> 1); + + // un-strobe row + switch (row) { + case 0: palClearPad(GPIOB, 2); break; + case 1: palClearPad(GPIOB, 3); break; + case 2: palClearPad(GPIOB, 18); break; + case 3: palClearPad(GPIOB, 19); break; + case 4: palClearPad(GPIOC, 0); break; + case 5: palClearPad(GPIOC, 9); break; + case 6: palClearPad(GPIOC, 10); break; + case 7: palClearPad(GPIOC, 11); break; + case 8: palClearPad(GPIOD, 0); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + uint8_t offset = 0; +#ifdef MASTER_IS_ON_RIGHT + if (is_serial_link_master()) { + offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS; + } +#endif + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { + matrix[offset + row] = matrix_debouncing[row]; + } + debouncing = false; + } + matrix_scan_quantum(); + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + xprintf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + xprintf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1<<col)) + xprintf("1"); + else + xprintf("0"); + } + xprintf("\n"); + } +} + +void matrix_set_remote(matrix_row_t* rows, uint8_t index) { + uint8_t offset = 0; +#ifdef MASTER_IS_ON_RIGHT + offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2); +#else + offset = LOCAL_MATRIX_ROWS * (index + 1); +#endif + for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { + matrix[offset + row] = rows[row]; + } +} diff --git a/keyboards/ergodox/infinity/mcuconf.h b/keyboards/ergodox/infinity/mcuconf.h new file mode 100644 index 000000000..f6730b99c --- /dev/null +++ b/keyboards/ergodox/infinity/mcuconf.h @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ + +#define K20x7 + +/* Select the MCU clocking mode below by enabling the appropriate block. */ + +#define KINETIS_NO_INIT FALSE + +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 72000000UL +#define KINETIS_SYSCLK_FREQUENCY 72000000UL +#define KINETIS_BUSCLK_FREQUENCY 36000000UL +#define KINETIS_FLASHCLK_FREQUENCY 24000000UL + +#if 0 +/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 +#define KINETIS_CLKDIV1_OUTDIV2 1 +#define KINETIS_CLKDIV1_OUTDIV4 2 +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE +#define KINETIS_SERIAL_USE_UART1 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* Need to redefine this, since the default is for K20x */ +/* This is for Teensy LC; you should comment it out (or change to 5) + * for Teensy 3.x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * SPI driver system settings. + */ +#define KINETIS_SPI_USE_SPI0 TRUE + +#define KINETIS_I2C_USE_I2C0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/ergodox/keymaps/ab/Makefile b/keyboards/ergodox/keymaps/ab/Makefile new file mode 100644 index 000000000..b673c5ce5 --- /dev/null +++ b/keyboards/ergodox/keymaps/ab/Makefile @@ -0,0 +1,9 @@ +# Having a file like this allows you to override Makefile definitions +# for your own particular keymap + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/ab/keyboard-layout.json b/keyboards/ergodox/keymaps/ab/keyboard-layout.json new file mode 100644 index 000000000..e2badad4d --- /dev/null +++ b/keyboards/ergodox/keymaps/ab/keyboard-layout.json @@ -0,0 +1,387 @@ +[ + { + "name": "Beginner's Keymap for Ergodox-EZ", + "author": "Anand Babu Periasamy" + }, + [ + { + "x": 3.5 + }, + "#\n3\n\n\nF3", + { + "x": 10.5 + }, + ")\n0\n\n\nF10" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "@\n2\n\n\nF2", + { + "x": 1 + }, + "$\n4\n\n\nF4", + { + "x": 8.5 + }, + "(\n9\n\n\nF9", + { + "x": 1 + }, + "_\n-\n\n\nF11" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "%\n5\n\n\nF5", + "^\n6\n\n\nF6", + { + "x": 4.5 + }, + "&\n7\n\n\nF7", + "*\n8\n\n\nF8" + ], + [ + { + "y": -0.875, + "w": 1.5 + }, + "~\n`\n\n\nEsc", + "!\n1\n\n\nF1", + { + "x": 14.5 + }, + "+\n=\n\n\nF12", + { + "a": 7, + "w": 1.5 + }, + "Backspace\n\n\n\nBackspace" + ], + [ + { + "y": -0.375, + "x": 3.5 + }, + "E\n\n\n\n<i class=\"fa fa-caret-up\" aria-hidden=\"true\"></i>", + { + "x": 10.5 + }, + "I" + ], + [ + { + "y": -0.8799999999999999, + "x": 2.5 + }, + "W" + ], + [ + { + "y": -0.9950000000000001, + "x": 4.5, + "a": 4 + }, + "R", + { + "x": 8.5, + "a": 7 + }, + "U", + { + "x": 1 + }, + "O" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "T", + { + "h": 1.5 + }, + "<i class=\"fa fa-chevron-circle-left\" aria-hidden=\"true\"></i>", + { + "x": 4.5, + "h": 1.5 + }, + "<i class=\"fa fa-chevron-circle-right\" aria-hidden=\"true\"></i>", + "Y" + ], + [ + { + "y": -0.875, + "a": 6, + "w": 1.5 + }, + "Tab", + { + "a": 7 + }, + "Q", + { + "x": 14.5 + }, + "P", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "a": 7 + }, + "D\n\n\n\n<i class=\"fa fa-caret-down\" aria-hidden=\"true\"></i>", + { + "x": 10.5 + }, + "K" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "S\n\n\n\n<i class=\"fa fa-caret-left\" aria-hidden=\"true\"></i>", + { + "x": 1, + "c": "#c4bcbc" + }, + "F\n\n\n\n<i class=\"fa fa-caret-right\" aria-hidden=\"true\"></i>", + { + "x": 8.5 + }, + "J", + { + "x": 1, + "c": "#cccccc" + }, + "L" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "G", + { + "x": 6.5 + }, + "H" + ], + [ + { + "y": -0.875, + "a": 4, + "fa": [ + 0, + 0, + 0, + 2 + ], + "w": 1.5 + }, + "\n\n\nCtrl\n\n\nCaps", + { + "a": 7 + }, + "A", + { + "x": 14.5, + "a": 4 + }, + ":\n;", + { + "a": 7, + "w": 1.5 + }, + "Enter" + ], + [ + { + "y": -0.625, + "x": 6.5, + "h": 1.5 + }, + "PgDn", + { + "x": 4.5, + "h": 1.5 + }, + "PgUp" + ], + [ + { + "y": -0.75, + "x": 3.5 + }, + "C\n\n\n\n<i class=\"fa fa-hand-o-up\" aria-hidden=\"true\"></i>", + { + "x": 10.5, + "a": 4 + }, + "<\n," + ], + [ + { + "y": -0.875, + "x": 2.5, + "a": 7 + }, + "X\n\n\n\n<i class=\"fa fa-hand-o-left\" aria-hidden=\"true\"></i>", + { + "x": 1 + }, + "V\n\n\n\n<i class=\"fa fa-hand-o-right\" aria-hidden=\"true\"></i>", + { + "x": 8.5 + }, + "M", + { + "x": 1, + "a": 4 + }, + ">\n." + ], + [ + { + "y": -0.875, + "x": 5.5, + "a": 7 + }, + "B", + { + "x": 6.5 + }, + "N" + ], + [ + { + "y": -0.875, + "w": 1.5 + }, + "Shift", + "Z", + { + "x": 14.5, + "a": 4 + }, + "?\n/", + { + "w": 1.5 + }, + "\"\n'" + ], + [ + { + "y": -0.375, + "x": 3.5, + "a": 7 + }, + "Alt\n\n\n\n<i class=\"fa fa-search-minus\" aria-hidden=\"true\"></i>", + { + "x": 10.5 + }, + "<i class=\"fa fa-long-arrow-down\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-down'></i>" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "<i class='fa fa-linux'></i>\n\n\n\n<i class=\"fa fa-search\" aria-hidden=\"true\"></i>", + { + "x": 1 + }, + "Alt\n\n\n\n<i class=\"fa fa-search-plus\" aria-hidden=\"true\"></i>", + { + "x": 8.5 + }, + "<i class=\"fa fa-long-arrow-left\" aria-hidden=\"true\"></i>\n\n\n\n<i class=\"fa fa-undo\" aria-hidden=\"true\"></i>", + { + "x": 1 + }, + "<i class=\"fa fa-long-arrow-up\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-up'></i>" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "Ctrl\n\n\n\n<i class='fa fa-download'></i>", + "Esc", + { + "x": 14.5 + }, + "<i class=\"fa fa-long-arrow-right\" aria-hidden=\"true\"></i>\n\n\n\n<i class='fa fa-volume-off'></i>", + "Fn" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1 + }, + "<i class=\"fa fa-clone\" aria-hidden=\"true\"></i>", + "(" + ], + [ + { + "h": 2 + }, + "Space", + { + "h": 2 + }, + "Del", + "[" + ], + [ + { + "x": 2 + }, + "{" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3 + }, + ")", + "<i class=\"fa fa-paste\" aria-hidden=\"true\"></i>" + ], + [ + { + "x": -3 + }, + "]", + { + "h": 2 + }, + "Enter", + { + "h": 2 + }, + "<i class=\"fa fa-chevron-left\" aria-hidden=\"true\"></i>" + ], + [ + { + "x": -3 + }, + "}" + ] +]
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/ab/keyboard-layout.png b/keyboards/ergodox/keymaps/ab/keyboard-layout.png Binary files differnew file mode 100644 index 000000000..740684461 --- /dev/null +++ b/keyboards/ergodox/keymaps/ab/keyboard-layout.png diff --git a/keyboards/ergodox/keymaps/ab/keymap.c b/keyboards/ergodox/keymaps/ab/keymap.c new file mode 100644 index 000000000..7938c9da3 --- /dev/null +++ b/keyboards/ergodox/keymaps/ab/keymap.c @@ -0,0 +1,155 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define FN1 1 // media layer + +#define CAPS_CTL CTL_T(KC_CAPS) // Caps on tap, Ctrl on hold. +#define COPY LCTL(KC_V) // C-c Copy +#define PASTE LCTL(KC_V) // C-v Paste +#define ZM_NRM LCTL(KC_0) // C-0 Zoom Normal +#define ZM_OUT LCTL(KC_MINS) // C-- Zoom Out +#define ZM_IN LCTL(KC_PLUS) // C-+ Zoom In +#define EM_UNDO LCTL(KC_UNDS) // C-_ Emacs Undo + +#define _MOB 1 // Mobile# +#define _CUS1 2 // Custom macro 1 +#define _CUS2 3 // Custom macro 2 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | - | = | BSpace | + * |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | Fwd | | Back | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Caps/Ctl| A | S | D | F | G |------| |------| H | J | K | L | ; | Enter | + * |--------+------+------+------+------+------| PgDn | | PgUp |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | ' | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Ctrl | Esc | LGui | Alt | Alt | | Left | Dn | Up | Right| Fn | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Copy | ( | | ) | Paste| + * ,------|------+------| |------+------+------. + * | | | [ | | ] | | | + * |Space | Del |------| |------| Enter|BSpace| + * | | | { | | } | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* + [BASE] = KEYMAP( // layer 0 : default + // Left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_WBAK, + CAPS_CTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGDN, + KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, KC_LALT, + COPY, KC_LCBR, + KC_LPRN, + KC_SPC, KC_DEL, KC_LBRC, + // Right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_WFWD, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_PGUP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, TG(FN1), + KC_RCBR, PASTE, + KC_RPRN, + KC_RBRC, KC_ENT, KC_BSPC), +/* Keymap 1: Fn Keys, media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | BSpace | + * |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | LClk | MClk | RClk | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Teensy| | ZmNrm| ZmOut| ZmIn | | Undo |VolDn |VolUp | Mute | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------+------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// FN1 Layer + [FN1] = KEYMAP( + // Left hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN3, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, ZM_NRM, ZM_OUT, ZM_IN, + KC_TRNS, KC_TRNS, + KC_TRNS, + RESET, KC_TRNS, KC_TRNS, + // Right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, M(_MOB), KC_TRNS, M(_CUS1),M(_CUS2),KC_TRNS, KC_TRNS, + EM_UNDO, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case _MOB: // Your mobile# here. + return MACRODOWN(T(1), T(2), T(3), T(MINS), + T(1), T(2), T(3), T(MINS), + T(1), T(2), T(3), T(4), + END); + case _CUS1: // Your custom macro 1 + return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(SPC), END); + case _CUS2: // Your custom macro 2 + return MACRODOWN(T(L), T(S), T(SPC), T(MINS), T(L), T(ENT), END); + }; + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/ab/readme.md b/keyboards/ergodox/keymaps/ab/readme.md new file mode 100644 index 000000000..6b1ac2be3 --- /dev/null +++ b/keyboards/ergodox/keymaps/ab/readme.md @@ -0,0 +1,21 @@ +# Beginner's keymap for Ergodox-EZ +Beginner's keymap emulates standard QWERTY keyboard for beginners. Once you get comfortable with the Ergodox-EZ, you may fork this keymap and customize it for your own needs or find a suitable one from the community contributed keymaps. + + + +#### Pros +* Easier to switch between regular keyboards and Ergodox-EZ. +* Easy on beginners. It has everything you need for your day to day usage. + +#### Cons +* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/jackhumbert/qmk_firmware/blob/master/keyboards/ergodox_ez/keymaps/default/readme.md) +* While multiple layers are possible, beginner's keymap only uses one additional layer for mouse, function and volume keys. + +#### Notes +* Ideally number key [6] should have started from the right-hand side of the keyboard. Doing so breaks the familiar QWERTY layout. +* Quote key ['] should have been placed between [:] and [Enter]. Due to lack of key space, it is placed below [Enter]. +* Double [Alt] keys are placed adjacent to each other for convenience. +* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. +* Additional bracket keys are placed in the center of the keyboard for programmer's convenience. + + diff --git a/keyboards/ergodox/keymaps/adnw_k_o_y/keymap.c b/keyboards/ergodox/keymaps/adnw_k_o_y/keymap.c new file mode 100644 index 000000000..31ae4262b --- /dev/null +++ b/keyboards/ergodox/keymaps/adnw_k_o_y/keymap.c @@ -0,0 +1,185 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | K | . | O | , | Y | L1 | | L1 | V | G | C | L | ß | Z | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | H | A | E | I | U |------| |------| D | T | R | N | S | F | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |X/Ctrl| Q | Ä | Ü | Ö | | | | B | P | W | M | J | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Enter |------| |------| Tab |RShift| + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, DE_K, DE_DOT, DE_O, DE_COMM,DE_Y, TG(SYMB), + KC_BSPC, DE_H, DE_A, DE_E, DE_I, DE_U, + KC_LSFT, CTL_T(DE_X), DE_Q, DE_AE, DE_UE, DE_OE, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_ENT ,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), DE_V, DE_G, DE_C, DE_L, DE_SS, DE_Z, + DE_D, DE_T, DE_R, DE_N, LT(MDIA, DE_S), GUI_T(KC_F), + MEH_T(KC_NO),KC_B, KC_P, KC_W, KC_M, CTL_T(KC_J), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_RSFT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/adnw_k_o_y/readme.md b/keyboards/ergodox/keymaps/adnw_k_o_y/readme.md new file mode 100644 index 000000000..f0dd3815c --- /dev/null +++ b/keyboards/ergodox/keymaps/adnw_k_o_y/readme.md @@ -0,0 +1,7 @@ +# Basic implementation for k.o,y variant of the adnw layout + +adnw is a layout optimised for usage with german and english language +k.o,y is a variant of this layout +http://www.adnw.de/index.php?n=Main.SeitlicheNachbaranschl%C3%A4ge + +The os must use the de_DE layout diff --git a/keyboards/ergodox/keymaps/alexjj/keymap.c b/keyboards/ergodox/keymaps/alexjj/keymap.c new file mode 100644 index 000000000..ac954ba5b --- /dev/null +++ b/keyboards/ergodox/keymaps/alexjj/keymap.c @@ -0,0 +1,238 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define UNIC 3 // unicode entry layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | 1! | 2@ | 3# | 4$ | 5% | 6^ | | 7& | 8* | 9( | 0) | -_ | += | BkSp | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | { | | } | Y | U | I | O | P | |\ | + * |--------+------+------+------+------+------| [ | | ] |------+------+------+------+------+--------| + * | Win | A | S | D | F | G |------| |------| H | J | K | L | :; | '" | + * |--------+------+------+------+------+------| Home | | End |------+------+------+------+------+--------| + * | LShift |Z/Alt | X | C | V | B | | | | N | M | , | . | Alt | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | COPY | PASTE| Left | Right| | Down | Up |Hyper | `~ | RCtrl | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * Hyper = Ctrl+Super+Alt+Shift | ~L3 | F5 | | F2 | ~L2 | + * ,------|------|------| |------+------+------. + * | | | PgUp | | Ins | | | + * | Enter| BkSp |------| |------| ~L1 |Space | + * | | | PgDn | | Del | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, ALT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_HOME, + KC_LCTRL, LCTL(KC_C), LCTL(KC_V), KC_LEFT,KC_RGHT, + KC_FN3, KC_F5, + KC_PGUP, + KC_ENT,KC_BSPC,KC_PGDN, + // right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, + KC_END, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_DOWN,KC_UP, ALL_T(KC_NO),KC_GRV, KC_RCTRL, + KC_F2, KC_FN2, + KC_INS, + KC_DELT,KC_FN1, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 |PrintScr| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | £ | | | | | | . | 0 | = |Alt+F4| + * `----------------------------------' `----------------------------------' + * ↑ ,-------------. ,-------------. + * THERE! | | | | | | + * ,------|------|------| |------+------+------. + * CAD = Ctrl + Alt + Delete | | | | | | | | + * | | |------| |------| | | + * | | | | | CAD | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,M(3),KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_TRNS, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, LALT(KC_F4), + KC_TRNS, KC_TRNS, + KC_TRNS, + LCTL(LALT(KC_DEL)), KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | TEENSY | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolDn |VolUp | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +/* Keymap 3: Unicode Entry + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Alt | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | + | + | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Alt | | | E | | | | | | | 7 | 8 | 9 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Alt | A | | D | F | |------| |------| | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Alt | | | C | | B | | | | | 1 | 2 | 3 | + | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Alt | Alt | Alt | | | | 0 | 0 | 0 | + | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * WINDOWS ONLY SETUP!! | ~L3 | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | Alt | Alt |------| |------| Alt | Alt | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[UNIC] = KEYMAP( // layer 3 : Unicode Entry + // left hand + KC_LALT, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_P6, + KC_LALT, KC_TRNS, KC_TRNS, KC_E, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LALT, KC_A, KC_TRNS, KC_D, KC_F, KC_TRNS, + KC_LALT, KC_TRNS, KC_TRNS, KC_C, KC_TRNS, KC_B, KC_TRNS, + KC_LALT, KC_LALT, KC_LALT, KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_LALT,KC_LALT, KC_TRNS, + // right hand + KC_P7, KC_P8, KC_P9, KC_P0, KC_PPLS,KC_PPLS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TRNS, + KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_TRNS, + KC_P0, KC_P0, KC_P0, KC_PPLS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS,KC_LALT, KC_LALT + ), +}; + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_LAYER_TAP_TOGGLE(MDIA), // FN2 - Momentary Layer 2 (Media) + [3] = ACTION_LAYER_TAP_TOGGLE(UNIC) // FN3 - Momentary Layer 3 (Unicode entry) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + case 3: // this would trigger when you hit a key mapped as M(3) + if (record->event.pressed) { + return MACRO( I(255), D(LALT), T(P1), T(P5), T(P6), U(LALT), END ); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/alexjj/readme.md b/keyboards/ergodox/keymaps/alexjj/readme.md new file mode 100644 index 000000000..239e32d39 --- /dev/null +++ b/keyboards/ergodox/keymaps/alexjj/readme.md @@ -0,0 +1,179 @@ +Englishman in New York +=========================== + +:microphone: :tea: + +About +------ + +After using the massdrop configurator to get the basics, I wanted to add a +little extra to my ergodox. Notably the Hyper hotkey, the press and hold, +and a way to have my beloved £ :pound: symbol available<sup>[1](#unicode)</sup>. Why not switch to a GB +layout? Well the computers I use are US keymap'd and I can't always change +that. Plus I've got used to 2/@ and 3/# and moving to the ergodox was hard +enough. :sweat_smile: + +I started from the default and edited from there as I needed. It's somewhat +similar to a regular layout, particularly R1 and shift/controls. I ended up +with a few keys that were blank, so I'm testing out some shortcuts. Alt+F4 for +quitting things in Windows, is one example, but I felt it was better placed on +the 1st layer - in case of fat fingers. + +Layout +------- + + + +### Base Layer + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| ESC | 1! | 2@ | 3# | 4$ | 5% | 6^ | | 7& | 8* | 9( | 0) | -_ | += | BkSp | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | E | R | T | { | | } | Y | U | I | O | P | |\ | +|--------+------+------+------+------+------| [ | | ] |------+------+------+------+------+--------| +| Win | A | S | D | F | G |------| |------| H | J | K | L | :; | '" | +|--------+------+------+------+------+------| Home | | End |------+------+------+------+------+--------| +| LShift |Z/Alt | X | C | V | B | | | | N | M | , | . | Alt | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | COPY | PASTE| Left | Right| | Down | Up |Hyper | `~ | RCtrl | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + Hyper = Ctrl+Super+Alt+Shift | ~L3 | F5 | | F2 | ~L2 | + ,------|------|------| |------+------+------. + | | | PgUp | | Ins | | | + | Enter| BkSp |------| |------| ~L1 |Space | + | | | PgDn | | Del | | | + `--------------------' `--------------------' +``` + +### Symbol Layer + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 |PrintScr| +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | £ | | | | | | . | 0 | = |Alt+F4| + `----------------------------------' `----------------------------------' + ↑ ,-------------. ,-------------. + THERE! | | | | | | + ,------|------|------| |------+------+------. + CAD = Ctrl + Alt + Delete | | | | | | | | + | | |------| |------| | | + | | | | | CAD | | | + `--------------------' `--------------------' +``` +### Media Layer + +Not touched this, not used either. + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| TEENSY | | | | | | | | | | | | | | | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | | | MsUp | | | | | | | | | | | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | | | | | | | | | Prev | Next | | | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | Lclk | Rclk | |VolDn |VolUp | Mute | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | |Brwser| + | | |------| |------| |Back | + | | | | | | | | + `--------------------' `--------------------' +``` +### Unicode Layer + +Used to enter/test unicode input on Windows. All numbers are numpad keys. + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| Alt | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | + | + | | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Alt | | | E | | | | | | | 7 | 8 | 9 | + | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| Alt | A | | D | F | |------| |------| | 4 | 5 | 6 | + | | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| Alt | | | C | | B | | | | | 1 | 2 | 3 | + | | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | Alt | Alt | Alt | | | | 0 | 0 | 0 | + | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + WINDOWS ONLY SETUP!! | ~L3 | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | Alt | Alt |------| |------| Alt | Alt | + | | | | | | | | + `--------------------' `--------------------' +``` + + +Usage +------ + +~L1 / L2 / L3 will momentarily switch to a layer if held and another key is pressed. +If pressed and released will remain on layer until pressed again. + +### Unicode + +This layout is for Windows only. To enter a character Press and Hold Alt, type + and hex code then release Alt. + +Changelog +----------- + +### [0.2.1] - 2016-04-05 + +* Changed £ to alt code in Windows. Windows sucks at unicode. + +### [0.2.0] - 2016-03-27 + +* Added unicode layer +* Moved Copy/Paste to left hand side +* Switched Enter and Space (again) +* Added L3 (unicode layer) toggle +* Removed Press and Hold for Alt on right hand size (/) +* Swapped Volume Up/Down to match arrows +* Tried fixing £ macro +* Removed * in the matrix function things (upstream change) + +### [0.1.1] - 2016-03-23 + +* Changed £ input to a macro + + +### [0.1.0] - 2016-03-22 + +After actually using the keyboard, I've made some changes: + +* Swapped Enter and Space +* Moved backspace to thumb keys (top right still remains) +* Added Ctrl+Alt+Delete +* Added Teensy Reset on 2nd layer +* Switched Up and Down +* Changed copy/paste to be Ctrl+c and Ctrl+v as KC_COPY/PASTE didn't work (in Windows) +* Moved ~L2 to replace +L1 after learning how the function works (notes above) +* Hopefully fixed GBP symbol (unicode enabled in MakeFile) + +### [0.0.1] - 2016-03-21 + +First version + + +Issues +------- + +Space for feedback and notes for future improvements + +---- +<sup><a name="unicode">1</a></sup>: For Windows only, and you have to edit the [registry](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input). diff --git a/keyboards/ergodox/keymaps/alexjj/rl-layout.jpg b/keyboards/ergodox/keymaps/alexjj/rl-layout.jpg Binary files differnew file mode 100644 index 000000000..e4e92bf46 --- /dev/null +++ b/keyboards/ergodox/keymaps/alexjj/rl-layout.jpg diff --git a/keyboards/ergodox/keymaps/algernon/COPYING b/keyboards/ergodox/keymaps/algernon/COPYING new file mode 100644 index 000000000..94a9ed024 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + <program> Copyright (C) <year> <name of author> + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +<http://www.gnu.org/licenses/>. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile new file mode 100644 index 000000000..6bf3976b9 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/Makefile @@ -0,0 +1,35 @@ +BOOTMAGIC_ENABLE=no +COMMAND_ENABLE=no +SLEEP_LED_ENABLE=no +UNICODE_ENABLE=no +FORCE_NKRO ?= yes +DEBUG_ENABLE = no +CONSOLE_ENABLE = no +TAP_DANCE_ENABLE = yes +KEYLOGGER_ENABLE ?= yes + +ifeq (${FORCE_NKRO},yes) +OPT_DEFS += -DFORCE_NKRO +endif + +ifeq (${KEYLOGGER_ENABLE},yes) +OPT_DEFS += -DKEYLOGGER_ENABLE +CONSOLE_ENABLE = yes +endif + +KEYMAP_VERSION = $(shell \ + if [ -d "${KEYMAP_PATH}/.git" ]; then \ + cd "${KEYMAP_PATH}" && git describe --abbrev=6 --dirty --always --tags --match 'v*' 2>/dev/null; \ + else echo QMK; fi) + +KEYMAP_BRANCH = $(shell \ + if [ -d "${KEYMAP_PATH}/.git" ]; then \ + cd "${KEYMAP_PATH}"; \ + fi; \ + git rev-parse --abbrev-ref HEAD 2>/dev/null) + +OPT_DEFS += -DKEYMAP_VERSION=\"$(KEYMAP_VERSION)\\\#$(KEYMAP_BRANCH)\" + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/algernon/config.h b/keyboards/ergodox/keymaps/algernon/config.h new file mode 100644 index 000000000..9bb1025be --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/config.h @@ -0,0 +1,27 @@ +#ifndef CONFIG_ALGERNON_H +#define CONFIG_ALGERNON_H + +#include "../../config.h" + +#undef MOUSEKEY_TIME_TO_MAX +#undef MOUSEKEY_MAX_SPEED + +#define MOUSEKEY_TIME_TO_MAX 1 +#define MOUSEKEY_MAX_SPEED 2 + +#undef MOUSEKEY_DELAY +#define MOUSEKEY_DELAY 0 + +#undef MOUSEKEY_WHEEL_DELAY +#define MOUSEKEY_WHEEL_DELAY 0 + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 3000 + +#undef LOCKING_SUPPORT_ENABLE +#undef LOCKING_RESYNC_ENABLE + +#undef LEADER_TIMEOUT +#define LEADER_TIMEOUT 1000 + +#endif diff --git a/keyboards/ergodox/keymaps/algernon/images/adore-layer.png b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png Binary files differnew file mode 100644 index 000000000..3df68ea53 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/adore-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/base-layer.png b/keyboards/ergodox/keymaps/algernon/images/base-layer.png Binary files differnew file mode 100644 index 000000000..7b25a05b3 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/base-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/heatmap.png b/keyboards/ergodox/keymaps/algernon/images/heatmap.png Binary files differnew file mode 100644 index 000000000..356035e0a --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/heatmap.png diff --git a/keyboards/ergodox/keymaps/algernon/images/hun-layer.png b/keyboards/ergodox/keymaps/algernon/images/hun-layer.png Binary files differnew file mode 100644 index 000000000..104a9544d --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/hun-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/nav-n-media-layer.png b/keyboards/ergodox/keymaps/algernon/images/nav-n-media-layer.png Binary files differnew file mode 100644 index 000000000..16d29e124 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/nav-n-media-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png Binary files differnew file mode 100644 index 000000000..698d11e5f --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/one-handed-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/images/steno-layer.png b/keyboards/ergodox/keymaps/algernon/images/steno-layer.png Binary files differnew file mode 100644 index 000000000..fe3c03c93 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/images/steno-layer.png diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c new file mode 100644 index 000000000..6a14ef467 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -0,0 +1,1217 @@ +/*
+ * algernon's ErgoDox EZ layout, please see the readme.md file!
+ */
+
+#include "ergodox.h"
+#include "led.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "action_util.h"
+#include "mousekey.h"
+#include "timer.h"
+#include "keymap_plover.h"
+#include "eeconfig.h"
+#include "wait.h"
+
+/* Layers */
+
+enum {
+ BASE = 0,
+ ADORE,
+ ARRW,
+ APPSEL,
+ HUN,
+ NMDIA,
+ OHLFT,
+ OHRGT,
+ PLVR,
+};
+
+/* Macros */
+
+enum {
+ NONE = 0,
+ // Buttons that do extra stuff
+ A_GUI,
+ A_PLVR,
+ A_ESC,
+ A_MPN,
+
+ // Function / number keys
+ KF_1, // 1, F1
+ KF_2, // 2, F2
+ KF_3, // ...
+ KF_4,
+ KF_5,
+ KF_6,
+ KF_7,
+ KF_8,
+ KF_9,
+ KF_10,
+ KF_11, // =, F11
+
+ // Application select keys
+ APP_SLK, // Slack
+ APP_EMCS, // Emacs
+ APP_TERM, // Terminal
+ APP_CHRM, // Chrome
+ APP_MSIC, // Music
+
+ // Diagonal mouse movement
+ A_MUL,
+ A_MUR,
+ A_MDL,
+ A_MDR,
+
+ // Hungarian layer keys
+ HU_AA, // Á
+ HU_OO, // Ó
+ HU_EE, // É
+ HU_UU, // Ú
+ HU_II, // Í
+ HU_OE, // Ö
+ HU_UE, // Ü
+ HU_OEE, // Ő
+ HU_UEE, // Ű
+
+ // One-handed layout specials
+ OH_BSSPC,
+ OH_ENTSFT,
+ OH_BASE,
+ OH_LEFT,
+ OH_RIGHT,
+};
+
+/* Fn keys */
+
+enum {
+ F_BSE = 0,
+ F_HUN,
+ F_GUI,
+ F_SFT,
+ F_ALT,
+ F_CTRL
+};
+
+/* Custom keycodes */
+
+enum {
+ CT_CLN = 0,
+ CT_MNS,
+ CT_TA,
+};
+
+/* States & timers */
+
+uint16_t gui_timer = 0;
+
+uint16_t kf_timers[12];
+
+uint16_t oh_base_timer = 0;
+uint16_t oh_bsspc_timer = 0;
+uint16_t oh_entsft_timer = 0;
+
+#define OH_BLINK_INTERVAL 500
+
+uint8_t oh_left_blink = 0;
+uint16_t oh_left_blink_timer = 0;
+uint8_t oh_right_blink = 0;
+uint16_t oh_right_blink_timer = 0;
+
+#if KEYLOGGER_ENABLE
+bool log_enable = false;
+#endif
+
+bool time_travel = false;
+
+/* The Keymap */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Keymap 0: Base Layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | Next/Prev | ' | , | . | P | Y | [ | | ] | F | G | C | R | L | \ |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow |
+ * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------|
+ * | Play/Pause| / | Q | J | K | X | | | | B | M | W | V | Z | Stop |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | : | | - | | | | |
+ * `-----------------------------------' `-----------------------------------'
+ * ,-------------. ,-------------.
+ * | LAlt | GUI | | MDIA | 1HND |
+ * ,------|------|------| |------+------+------.
+ * | | | Ctrl | | LEAD | | |
+ * |Backsp|LShift|------| |------| Enter| Space|
+ * | | | ESC | | HUN | | |
+ * `--------------------' `--------------------'
+ */
+[BASE] = KEYMAP(
+// left hand
+ KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
+,M(A_MPN) ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC
+,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I
+,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN
+,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN)
+
+ ,F(F_ALT),F(F_GUI)
+ ,F(F_CTRL)
+ ,KC_BSPC,F(F_SFT),M(A_ESC)
+
+ // right hand
+ ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
+ ,KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS
+ ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL
+ ,KC_RPRN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_MSTP
+ ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,OSL(NMDIA),M(OH_LEFT)
+ ,KC_LEAD
+ ,F(F_HUN) ,KC_ENT ,KC_SPC
+ ),
+
+/* Keymap 1: Adore layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 | Plvr | | Apps | 6 F6 | 7 F7 | 8 F8 | 9 F9 | 0 F10| F11 |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | Next/Prev | , | . | L | W | M | [ | | ] | F | H | C | P | Y | \ |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = / Arrow |
+ * |-----------+------+------+------+------+------| ( | | ) |------+------+------+------+------+-----------|
+ * | Play/Pause| / | Z | ' | K | X | | | | B | G | V | J | Q | Stop |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | : | | - | | | | |
+ * `-----------------------------------' `-----------------------------------'
+ * ,-------------. ,-------------.
+ * | LAlt | GUI | | MDIA | 1HND |
+ * ,------|------|------| |------+------+------.
+ * | | | Ctrl | | LEAD | | |
+ * |Backsp|LShift|------| |------| Enter| Space|
+ * | | | ESC | | HUN | | |
+ * `--------------------' `--------------------'
+ */
+[ADORE] = KEYMAP(
+// left hand
+ KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
+,M(A_MPN) ,KC_COMM ,KC_DOT ,KC_L ,KC_W ,KC_M ,KC_LBRC
+,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U
+,KC_MPLY ,KC_SLSH ,KC_Z ,KC_QUOT,KC_K ,KC_X ,KC_LPRN
+,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN)
+
+ ,F(F_ALT),F(F_GUI)
+ ,F(F_CTRL)
+ ,KC_BSPC,F(F_SFT),M(A_ESC)
+
+ // right hand
+ ,KC_APP ,M(KF_6),M(KF_7) ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
+ ,KC_RBRC ,KC_F ,KC_H ,KC_C ,KC_P ,KC_Y ,KC_BSLS
+ ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL
+ ,KC_RPRN ,KC_B ,KC_G ,KC_V ,KC_J ,KC_Q ,KC_MSTP
+ ,TD(CT_MNS),KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,OSL(NMDIA),M(OH_LEFT)
+ ,KC_LEAD
+ ,F(F_HUN) ,KC_ENT ,KC_SPC
+ ),
+
+/* Keymap 2: Arrow layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | | | | | | | | | | | | | | | |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | | | | | | | | | | | Home | Up | End | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | | | | | |------| |------| | Left | Down | Rght | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | | | | | | | | | | | | | | |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | | | | | | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * | | | | | | | |
+ * | | |------| |------| PgUp | PgDn |
+ * | | | | | | | |
+ * `--------------------' `--------------------'
+ */
+
+[ARRW] = KEYMAP(
+// left hand
+ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ // right hand
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,KC_TRNS ,KC_PGUP ,KC_PGDN
+ ),
+
+/* Keymap 3: Application select layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | |Music |Slack |Emacs |Term |Chrome| | | | | | | | | |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | | | | | | | | | | | | | | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | | | | | |------| |------| | | | | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | | | | | | | | | | | | | | |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | | | | | | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * | | | | | | | |
+ * | | |------| |------| | |
+ * | | | | | | | |
+ * `--------------------' `--------------------'
+ */
+
+[APPSEL] = KEYMAP(
+// left hand
+ KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ // right hand
+ ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,KC_TRNS ,KC_TRNS ,KC_TRNS
+ ),
+
+
+/* Keymap 4: Hungarian Layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | | | | | | | | | | | | | | | |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | | | Ő | | Ű | | | | | | | | | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | Á | Ó | É | Ú | Í |------| |------| | | | | | |
+ * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
+ * | | | Ö | | Ü | | | | | | | | | | |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | | | | | | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * | | | | | | | |
+ * | | |------| |------| | |
+ * | | | | | BASE | | |
+ * `--------------------' `--------------------'
+ */
+
+[HUN] = KEYMAP(
+// left hand
+ KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+,KC_NO ,KC_NO ,M(HU_OEE),KC_NO ,M(HU_UEE),KC_NO ,KC_NO
+,KC_NO ,M(HU_AA),M(HU_OO) ,M(HU_EE),M(HU_UU) ,M(HU_II)
+,KC_NO ,KC_NO ,M(HU_OE) ,KC_NO ,M(HU_UE) ,KC_NO ,KC_NO
+,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,KC_NO ,KC_NO
+ ,KC_NO
+ ,KC_NO ,KC_TRNS ,KC_TRNS
+
+ // right hand
+ ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,KC_NO ,KC_NO
+ ,KC_NO
+ ,F(F_BSE),KC_TRNS ,KC_TRNS
+ ),
+
+/* Keymap 5: Navigation & Media layer
+ *
+ * ,-----------------------------------------------------. ,-----------------------------------------------------.
+ * | MS Slow | | | | | |ScrLCK| |ScrLCK| | | | | | |
+ * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------|
+ * | MS Normal | | Home | Up | PgUp | | | |Scroll| |MsUpL | MsUp |MsUpR | |PrintScreen|
+ * |-----------+------+------+------+------+------| | | Up |------+------+------+------+------+-----------|
+ * | MS Fast | | Left | Down | Right| |------| |------| |MsLeft| MsDn |MsRght| | |
+ * |-----------+------+------+------+------+------| | |Scroll|------+------+------+------+------+-----------|
+ * | Play/Pause| | End | Down | PgDn | | | | Down | |MsDnL | MsDn |MsDnR | | Stop |
+ * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
+ * | | | | | | | | | | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | Mute | VlUp | | BASE | MClk |
+ * ,------|------|------| |------+------+------.
+ * | | | VlDn | | Prev |Left |Right |
+ * | SPC | Enter|------| |------| Click| Click|
+ * | | | ESC | | Next | | |
+ * `--------------------' `--------------------'
+ */
+[NMDIA] = KEYMAP(
+// left hand
+ KC_ACL0 ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LGUI(KC_L)
+,KC_ACL1 ,KC_NO ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_NO
+,KC_ACL2 ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO
+,KC_MPLY ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_NO
+,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_MUTE ,KC_VOLU
+ ,KC_VOLD
+ ,KC_SPC,KC_ENTER,M(A_ESC)
+
+ // right hand
+ ,LGUI(KC_L),KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_WH_U ,KC_NO ,M(A_MUL),KC_MS_U ,M(A_MUR),KC_NO ,KC_PSCR
+ ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO
+ ,KC_WH_D ,KC_NO ,M(A_MDL),KC_MS_D ,M(A_MDR),KC_NO ,KC_MSTP
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,KC_TRNS ,KC_MS_BTN3
+ ,KC_MPRV
+ ,KC_MNXT ,KC_BTN1 ,KC_BTN2
+ ),
+
+/* Keymap 6: One-handed, left side
+ *
+ * ,-----------------------------------------------------.
+ * | `~ | 1 F1 | 2 F2 | 3 F3 | 4 F4 | 5 F5 |A BSE|
+ * |-----------+------+------+------+------+-------------|
+ * | Tab | ' | , | . | P | Y | [ |
+ * |-----------+------+------+------+------+------| |
+ * | - | A | O | E | U | I |------|
+ * |-----------+------+------+------+------+------| ( |
+ * | Play/Pause| ; | Q | J | K | X | |
+ * `-----------+------+------+------+------+-------------'
+ * | Home | End | Down | Up | ESC |
+ * `-----------------------------------'
+ * ,-------------.
+ * | LAlt | GUI |
+ * ,------|------|------|
+ * |BackSp|LShift| Ctrl |
+ * | | |------|
+ * |Space |Enter |OTHER |
+ * `--------------------'
+ */
+[OHLFT] = KEYMAP(
+// left hand
+ KC_GRV ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,M(OH_BASE)
+,KC_TAB ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC
+,KC_MINS ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I
+,KC_MPLY ,KC_SCLN ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_LPRN
+,KC_HOME ,KC_END ,KC_DOWN ,KC_UP ,M(A_ESC)
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_RIGHT)
+
+ // right hand
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,KC_NO ,KC_NO
+ ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO
+ ),
+
+/* Keymap 7: One-handed, right side
+ *
+ * ,-----------------------------------------------------.
+ * | = F11 | 0 F10| 9 F9 | 8 F8 | 7 F7 | 6 F6 |A BSE|
+ * |-----------+------+------+------+------+-------------|
+ * | / | L | R | C | G | F | ] |
+ * |-----------+------+------+------+------+------| |
+ * | \ | S | N | T | H | D |------|
+ * |-----------+------+------+------+------+------| ) |
+ * | Stop | Z | V | W | M | B | |
+ * `-----------+------+------+------+------+-------------'
+ * | PgDn | PgUp | Right| Left | ESC |
+ * `-----------------------------------'
+ * ,-------------.
+ * | LAlt | GUI |
+ * ,------|------|------|
+ * |BackSp|LShift| Ctrl |
+ * | | |------|
+ * |Space |Enter |OTHER |
+ * `--------------------'
+ */
+[OHRGT] = KEYMAP(
+// left hand
+ M(KF_11) ,M(KF_10) ,M(KF_9) ,M(KF_8) ,M(KF_7) ,M(KF_6) ,M(OH_BASE)
+,KC_SLSH ,KC_L ,KC_R ,KC_C ,KC_G ,KC_F ,KC_RBRC
+,KC_BSLS ,KC_S ,KC_N ,KC_T ,KC_H ,KC_D
+,KC_MSTP ,KC_Z ,KC_V ,KC_W ,KC_M ,KC_B ,KC_RPRN
+,KC_PGDN ,KC_PGUP ,KC_RGHT ,KC_LEFT ,M(A_ESC)
+
+ ,KC_TRNS ,KC_TRNS
+ ,KC_TRNS
+ ,M(OH_BSSPC),M(OH_ENTSFT),M(OH_LEFT)
+
+ // right hand
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO
+
+ ,KC_NO ,KC_NO
+ ,KC_NO
+ ,KC_NO ,KC_NO ,KC_NO
+ ),
+
+/* Keymap 8: Steno for Plover
+ *
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | | | | | | | BASE | | | | | | | | |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | | # | # | # | # | # | # | | # | # | # | # | # | # | # |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | | | T | P | H | |------| |------| | F | P | L | T | D |
+ * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------|
+ * | | | K | W | R | | | | | | R | B | G | S | Z |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ * | | | | | | | | | | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * | | | | | | | |
+ * | A | O |------| |------| E | U |
+ * | | | | | | | |
+ * `--------------------' `--------------------'
+ */
+
+[PLVR] = KEYMAP(
+// left hand
+KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR),
+KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM,
+KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR,
+KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR,
+KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO,
+ KC_NO,
+ PV_A, PV_O, KC_NO,
+
+ // right hand
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM,
+ PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD,
+ PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ,
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO,
+ KC_NO,
+ KC_NO,PV_E, PV_U
+ ),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS)
+ ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS)
+ ,[F_GUI] = ACTION_MACRO_TAP(A_GUI)
+ ,[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT)
+ ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT)
+ ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
+};
+
+void toggle_steno(int pressed)
+{
+ uint8_t layer = biton32(layer_state);
+
+ if (pressed) {
+ if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR);
+
+ register_code(PV_LP);
+ register_code(PV_LH);
+ register_code(PV_LR);
+ register_code(PV_O);
+ register_code(PV_RL);
+ register_code(PV_RG);
+ } else {
+ unregister_code(PV_LP);
+ unregister_code(PV_LH);
+ unregister_code(PV_LR);
+ unregister_code(PV_O);
+ unregister_code(PV_RL);
+ unregister_code(PV_RG);
+ }
+}
+
+macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char)
+{
+ uint8_t need_shift = 0;
+ uint8_t hold_shift = 0;
+
+ if (!record->event.pressed)
+ return MACRO_NONE;
+
+ layer_off (HUN);
+
+ if (keyboard_report->mods & MOD_BIT (KC_LSFT)) {
+ hold_shift = 1;
+ need_shift = 1;
+ unregister_code (KC_LSFT);
+ }
+ if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) {
+ need_shift = 1;
+ hold_shift = 0;
+ unregister_code (KC_LSFT);
+ }
+
+ clear_oneshot_mods ();
+
+ register_code (KC_RALT);
+ unregister_code (KC_RALT);
+ if (accent == (KC_DQT)) {
+ register_code (KC_RSFT);
+ }
+ register_code (accent);
+ unregister_code (accent);
+ if (need_shift && accent != (KC_DQT)) {
+ register_code (KC_RSFT);
+ } else if (accent == (KC_DQT) && !need_shift) {
+ unregister_code (KC_RSFT);
+ }
+ register_code (hun_char);
+ unregister_code (hun_char);
+ if (need_shift || accent == (KC_DQT))
+ unregister_code (KC_RSFT);
+ if (hold_shift)
+ register_code (KC_LSFT);
+
+ return MACRO_NONE;
+}
+
+void ang_handle_kf (keyrecord_t *record, uint8_t id)
+{
+ uint8_t code = id - KF_1;
+
+ if (record->event.pressed) {
+ kf_timers[code] = timer_read ();
+ } else {
+ uint8_t kc;
+
+ if (timer_elapsed (kf_timers[code]) > TAPPING_TERM) {
+ // Long press
+ kc = KC_F1 + code;
+ } else {
+ if (id == KF_11)
+ kc = KC_EQL;
+ else
+ kc = KC_1 + code;
+ }
+
+ register_code (kc);
+ unregister_code (kc);
+ }
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch(id) {
+ case A_ESC:
+ if (record->event.pressed) {
+ if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) {
+ clear_oneshot_mods ();
+ } else {
+ register_code (KC_ESC);
+ }
+ layer_off (HUN);
+ } else {
+ unregister_code (KC_ESC);
+ }
+ break;
+
+ case A_MPN:
+ if (record->event.pressed) {
+ if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
+ ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
+ int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out());
+
+ if (oneshot)
+ clear_oneshot_mods ();
+ unregister_code (KC_LSFT);
+
+ register_code (KC_MPRV);
+ unregister_code (KC_MPRV);
+
+ if (!oneshot)
+ register_code (KC_LSFT);
+ } else {
+ return MACRO (T(MNXT), END);
+ }
+ }
+ break;
+
+ /* Hungarian layer */
+ case HU_AA:
+ return ang_do_hun (record, KC_QUOT, KC_A);
+ case HU_OO:
+ return ang_do_hun (record, KC_QUOT, KC_O);
+ case HU_EE:
+ return ang_do_hun (record, KC_QUOT, KC_E);
+ case HU_UU:
+ return ang_do_hun (record, KC_QUOT, KC_U);
+ case HU_II:
+ return ang_do_hun (record, KC_QUOT, KC_I);
+ case HU_OE:
+ return ang_do_hun (record, KC_DQT, KC_O);
+ case HU_UE:
+ return ang_do_hun (record, KC_DQT, KC_U);
+ case HU_OEE:
+ return ang_do_hun (record, KC_EQL, KC_O);
+ case HU_UEE:
+ return ang_do_hun (record, KC_EQL, KC_U);
+
+ /* Mouse movement */
+ case A_MUL:
+ if (record->event.pressed) {
+ mousekey_on(KC_MS_UP);
+ mousekey_on(KC_MS_LEFT);
+ } else {
+ mousekey_off(KC_MS_UP);
+ mousekey_off(KC_MS_LEFT);
+ }
+ mousekey_send();
+ break;
+
+ case A_MUR:
+ if (record->event.pressed) {
+ mousekey_on(KC_MS_UP);
+ mousekey_on(KC_MS_RIGHT);
+ } else {
+ mousekey_off(KC_MS_UP);
+ mousekey_off(KC_MS_RIGHT);
+ }
+ mousekey_send();
+ break;
+
+ case A_MDL:
+ if (record->event.pressed) {
+ mousekey_on(KC_MS_DOWN);
+ mousekey_on(KC_MS_LEFT);
+ } else {
+ mousekey_off(KC_MS_DOWN);
+ mousekey_off(KC_MS_LEFT);
+ }
+ mousekey_send();
+ break;
+
+ case A_MDR:
+ if (record->event.pressed) {
+ mousekey_on(KC_MS_DOWN);
+ mousekey_on(KC_MS_RIGHT);
+ } else {
+ mousekey_off(KC_MS_DOWN);
+ mousekey_off(KC_MS_RIGHT);
+ }
+ mousekey_send();
+ break;
+
+ /* Plover base */
+ case A_PLVR:
+ toggle_steno(record->event.pressed);
+ break;
+
+ /* GUI & AppSel */
+ case A_GUI:
+ if (record->event.pressed) {
+ register_code (KC_LGUI);
+ if (record->tap.count && !record->tap.interrupted) {
+ if (record->tap.count >= 2) {
+ register_code (KC_W);
+ layer_on (APPSEL);
+ set_oneshot_layer (APPSEL, ONESHOT_START);
+ }
+ } else {
+ record->tap.count = 0;
+ }
+ gui_timer = 0;
+ } else {
+ if (record->tap.count >= 2)
+ {
+ unregister_code (KC_W);
+ clear_oneshot_layer_state (ONESHOT_PRESSED);
+ }
+ gui_timer = timer_read ();
+ }
+ break;
+
+ case APP_SLK:
+ return MACRODOWN(T(S), T(L), T(A), T(C), T(K), T(ENT), END);
+
+ case APP_EMCS:
+ return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(ENT), END);
+
+ case APP_TERM:
+ return MACRODOWN(T(T), T(E), T(R), T(M), T(ENT), END);
+
+ case APP_CHRM:
+ return MACRODOWN(T(C), T(H), T(R), T(O), T(M), T(ENT), END);
+
+ case APP_MSIC:
+ return MACRODOWN(T(R), T(H), T(Y), T(T), T(H), T(M), T(B), T(O), T(X), T(ENT), END);
+
+ /* Function keys */
+ case KF_1 ... KF_11:
+ ang_handle_kf (record, id);
+ break;
+
+ /* 1HAND layout */
+ case OH_BASE:
+ if (record->event.pressed) {
+ oh_base_timer = timer_read ();
+ } else {
+ if (timer_elapsed (oh_base_timer) > TAPPING_TERM) {
+ layer_clear ();
+ } else {
+ return MACRO (T(APP), END);
+ }
+ }
+ break;
+
+ case OH_BSSPC:
+ if (record->event.pressed) {
+ oh_bsspc_timer = timer_read ();
+ } else {
+ if (timer_elapsed (oh_bsspc_timer) > TAPPING_TERM) {
+ return MACRO (T(BSPC), END);
+ } else {
+ return MACRO (T(SPC), END);
+ }
+ }
+ break;
+
+ case OH_ENTSFT:
+ if (record->event.pressed) {
+ oh_entsft_timer = timer_read ();
+ } else {
+ if (timer_elapsed (oh_entsft_timer) > TAPPING_TERM) {
+ if (keyboard_report->mods & MOD_BIT(KC_LSFT))
+ unregister_code (KC_LSFT);
+ else
+ register_code (KC_LSFT);
+ } else {
+ return MACRO (T(ENT), END);
+ }
+ }
+ break;
+
+ case OH_LEFT:
+ if (record->event.pressed) {
+ layer_move (OHLFT);
+ oh_left_blink = 1;
+ oh_left_blink_timer = timer_read ();
+ ergodox_right_led_1_on ();
+ }
+ break;
+
+ case OH_RIGHT:
+ if (record->event.pressed) {
+ layer_move (OHRGT);
+ oh_right_blink = 1;
+ oh_right_blink_timer = timer_read ();
+ ergodox_right_led_3_on ();
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+uint8_t is_adore = 0;
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+ uint8_t dl;
+
+ ergodox_led_all_on();
+ for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
+ ergodox_led_all_set (i);
+ wait_ms (5);
+ }
+ wait_ms(1000);
+ for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
+ ergodox_led_all_set (i);
+ wait_ms (10);
+ }
+ ergodox_led_all_off();
+
+ if (!eeconfig_is_enabled())
+ eeconfig_init();
+ dl = eeconfig_read_default_layer ();
+ if (dl == (1UL << ADORE))
+ is_adore = 1;
+};
+
+LEADER_EXTERNS();
+
+void ang_do_unicode (void) {
+ register_code (KC_RCTL);
+ register_code (KC_RSFT);
+ register_code (KC_U);
+ unregister_code (KC_U);
+ unregister_code (KC_RSFT);
+ unregister_code (KC_RCTL);
+ wait_ms (100);
+}
+
+void ang_tap (uint16_t codes[]) {
+ for (int i = 0; codes[i] != 0; i++) {
+ register_code (codes[i]);
+ unregister_code (codes[i]);
+ wait_ms (50);
+ }
+}
+
+#define TAP_ONCE(code) \
+ register_code (code); \
+ unregister_code (code)
+
+void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code (KC_RSFT);
+ register_code (KC_SCLN);
+ } else if (state->count == 2) {
+ register_code (KC_SCLN);
+ }
+}
+
+void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_SCLN);
+ unregister_code (KC_RSFT);
+ } else if (state->count == 2) {
+ unregister_code (KC_SCLN);
+ }
+}
+
+void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code (KC_MINS);
+ } else if (state->count == 2) {
+ register_code (KC_RSFT);
+ register_code (KC_MINS);
+ }
+}
+
+void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_MINS);
+ } else if (state->count == 2) {
+ unregister_code (KC_RSFT);
+ unregister_code (KC_MINS);
+ }
+}
+
+typedef struct {
+ bool layer_toggle;
+ bool sticky;
+ bool finished_once;
+} td_ta_state_t;
+
+void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) {
+ td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+ if (td_ta->finished_once) {
+ return;
+ }
+
+ if (td_ta->sticky) {
+ td_ta->sticky = false;
+ td_ta->layer_toggle = false;
+ layer_off (ARRW);
+ return;
+ }
+
+ td_ta->finished_once = true;
+ if (state->count == 1 && !state->pressed) {
+ register_code (KC_TAB);
+ td_ta->sticky = false;
+ td_ta->layer_toggle = false;
+ } else {
+ td_ta->layer_toggle = true;
+ layer_on (ARRW);
+ td_ta->sticky = (state->count == 2);
+ }
+}
+
+void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
+ td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+ if (!td_ta->layer_toggle)
+ unregister_code (KC_TAB);
+ if (!td_ta->sticky)
+ layer_off (ARRW);
+
+ td_ta->finished_once = false;
+}
+
+const qk_tap_dance_action_t tap_dance_actions[] = {
+ [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
+ ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
+ ,[CT_TA] = {
+ .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset },
+ .user_data = (void *)&((td_ta_state_t) { false, false, false })
+ }
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+ uint8_t layer = biton32(layer_state);
+
+ if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM)
+ unregister_code (KC_LGUI);
+
+ if (layer != OHLFT)
+ oh_left_blink = 0;
+ if (layer != OHRGT)
+ oh_right_blink = 0;
+
+ if (layer == HUN) {
+ ergodox_right_led_2_on();
+ ergodox_right_led_3_on();
+ } else if (layer == NMDIA) {
+ ergodox_right_led_1_on();
+ ergodox_right_led_2_on();
+ } else if (layer == PLVR) {
+ ergodox_right_led_1_on ();
+ ergodox_right_led_2_on ();
+ ergodox_right_led_3_on ();
+ } else if (layer == ADORE) {
+ ergodox_right_led_1_on ();
+ ergodox_right_led_2_on ();
+ ergodox_right_led_3_on ();
+
+ ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
+ }
+
+ if (layer == OHLFT || layer == OHRGT) {
+ ergodox_right_led_2_on();
+
+ if (oh_left_blink) {
+ if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL) {
+ if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) == 0)
+ ergodox_right_led_1_off ();
+ }
+ if (timer_elapsed (oh_left_blink_timer) > OH_BLINK_INTERVAL * 2) {
+ ergodox_right_led_1_on ();
+ oh_left_blink_timer = timer_read ();
+ }
+ }
+
+ if (oh_right_blink) {
+ if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL) {
+ if ((keyboard_report->mods & MOD_BIT(KC_LCTRL)) == 0)
+ ergodox_right_led_3_off ();
+ }
+ if (timer_elapsed (oh_right_blink_timer) > OH_BLINK_INTERVAL * 2) {
+ ergodox_right_led_3_on ();
+ oh_right_blink_timer = timer_read ();
+ }
+ }
+ }
+
+ if (keyboard_report->mods & MOD_BIT(KC_LSFT) ||
+ ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) {
+ ergodox_right_led_1_set (LED_BRIGHTNESS_HI);
+ ergodox_right_led_1_on ();
+ } else {
+ ergodox_right_led_1_set (LED_BRIGHTNESS_LO);
+ if (layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
+ ergodox_right_led_1_off ();
+ }
+
+ if (keyboard_report->mods & MOD_BIT(KC_LALT) ||
+ ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) {
+ ergodox_right_led_2_set (LED_BRIGHTNESS_HI);
+ ergodox_right_led_2_on ();
+ } else {
+ ergodox_right_led_2_set (LED_BRIGHTNESS_LO);
+ if (layer != OHRGT && layer != HUN && layer != OHLFT && layer != NMDIA && layer != PLVR && layer != ADORE)
+ ergodox_right_led_2_off ();
+ }
+
+ if (keyboard_report->mods & MOD_BIT(KC_LCTRL) ||
+ ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) {
+ ergodox_right_led_3_set (LED_BRIGHTNESS_HI);
+ ergodox_right_led_3_on ();
+ } else {
+ ergodox_right_led_3_set (LED_BRIGHTNESS_LO);
+ if (layer != OHRGT && layer != HUN && layer != PLVR && layer != ADORE)
+ ergodox_right_led_3_off ();
+ }
+
+ LEADER_DICTIONARY() {
+ leading = false;
+ leader_end ();
+
+#if KEYLOGGER_ENABLE
+ SEQ_ONE_KEY (KC_D) {
+ ergodox_led_all_on();
+ wait_ms(100);
+ ergodox_led_all_off();
+ log_enable = !log_enable;
+ }
+#endif
+
+ SEQ_ONE_KEY (KC_T) {
+ time_travel = !time_travel;
+ }
+
+ SEQ_ONE_KEY (KC_U) {
+ ang_do_unicode ();
+ }
+
+ SEQ_ONE_KEY (KC_V) {
+ SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" KEYMAP_VERSION ")");
+ }
+
+ SEQ_ONE_KEY (KC_L) {
+ /* λ */
+ ang_do_unicode ();
+
+ uint16_t codes[] = {KC_0, KC_3, KC_B, KC_B, KC_ENT, 0};
+ ang_tap (codes);
+ }
+
+ SEQ_ONE_KEY (KC_Y) {
+ uint16_t codes[] = {KC_BSLS, KC_O, KC_SLSH, 0};
+ ang_tap (codes);
+ }
+
+ SEQ_ONE_KEY (KC_S) {
+ ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
+ TAP_ONCE (KC_BSLS);
+ register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
+ ang_do_unicode (); TAP_ONCE (KC_3); TAP_ONCE (KC_0); TAP_ONCE (KC_C); TAP_ONCE (KC_4); TAP_ONCE (KC_SPC);
+ register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT);
+ TAP_ONCE (KC_SLSH);
+ ang_do_unicode (); TAP_ONCE (KC_A); TAP_ONCE (KC_F); TAP_ONCE (KC_SPC);
+ }
+
+ SEQ_TWO_KEYS (KC_W, KC_M) {
+ register_code (KC_LALT);
+ register_code (KC_F2);
+ unregister_code (KC_F2);
+ unregister_code (KC_LALT);
+
+ wait_ms (1000);
+
+ uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
+ ang_tap (codes);
+ register_code (KC_LGUI);
+ register_code (KC_UP);
+ unregister_code (KC_UP);
+ unregister_code (KC_LGUI);
+ }
+
+ SEQ_ONE_KEY (KC_A) {
+ if (is_adore == 0) {
+ default_layer_and (0);
+ default_layer_or ((1UL << ADORE));
+ eeconfig_update_default_layer ((1UL << ADORE));
+ is_adore = 1;
+
+ ergodox_led_all_off ();
+ ergodox_right_led_3_on ();
+ wait_ms (100);
+ ergodox_right_led_2_on ();
+ wait_ms (100);
+ ergodox_right_led_3_off ();
+ ergodox_right_led_1_on ();
+ wait_ms (100);
+ ergodox_right_led_2_off ();
+ wait_ms (100);
+ ergodox_right_led_1_off ();
+ } else {
+ is_adore = 0;
+ default_layer_and (0);
+ default_layer_or (1UL << BASE);
+ eeconfig_update_default_layer ((1UL << BASE));
+
+ ergodox_led_all_off ();
+ ergodox_right_led_1_on ();
+ wait_ms (100);
+ ergodox_right_led_2_on ();
+ wait_ms (100);
+ ergodox_right_led_1_off ();
+ ergodox_right_led_3_on ();
+ wait_ms (100);
+ ergodox_right_led_2_off ();
+ wait_ms (100);
+ ergodox_right_led_3_off ();
+ }
+ }
+ }
+}
+
+static uint16_t last4[4];
+
+bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+#if KEYLOGGER_ENABLE
+ uint8_t layer = biton32(layer_state);
+
+ if (log_enable && layer == BASE) {
+ xprintf ("KL: col=%d, row=%d\n", record->event.key.col,
+ record->event.key.row);
+ }
+#endif
+
+ if (time_travel && !record->event.pressed) {
+ uint8_t p;
+
+ // shift cache one to the left
+ for (p = 0; p < 3; p++) {
+ last4[p] = last4[p + 1];
+ }
+ last4[3] = keycode;
+
+ if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) {
+ uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0};
+ ang_tap (codes);
+ register_code (KC_RSFT);
+ register_code (KC_EQL);
+ unregister_code (KC_EQL);
+ unregister_code (KC_RSFT);
+
+ uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0};
+ ang_tap (codes2);
+
+ return false;
+ }
+ }
+
+ return true;
+}
diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md new file mode 100644 index 000000000..6fe177511 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/readme.md @@ -0,0 +1,198 @@ +<!-- -*- mode: markdown; fill-column: 8192 -*- --> + +algernon's layout +======================= + +This is an unconventional layout for the ErgoDox EZ. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. + + [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ + +Some of the things in the layout only work when one uses Spacemacs and GNOME under Linux. Your mileage may vary. + +## Table of Contents + +* [Layouts](#layouts) + - [Base layer](#base-layer) + - [ADORE layer](#adore-layer) + - [Hungarian layer](#hungarian-layer) + - [Navigation and media layer](#navigation-and-media-layer) + - [One-handed layer](#one-handed-layer) + - [Steno layer](#steno-layer) + - [LED states](#led-states) +* [Tools](#tools) + - [Heatmap](#heatmap) +* [Building](#building) + - [Using on Windows](#using-on-windows) +* [Changelog](#changelog) +* [License](#license) + +# Layouts + +## Base layer + +[](http://www.keyboard-layout-editor.com/#/gists/28f7eb305fdbff943613e1dc7aa9e82b) + +At its core, this is a Dvorak layout, with some minor changes. The more interesting parts are how certain keys behave: + +* The keys on the number row double as function keys, when held for a bit longer than an usual tap. This allows me to use the function keys without having to switch layers. +* The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. +* The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout. +* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. +* The **Media** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** keys are toggles. +* When holding any of the **Arrow** layer keys, the arrow layer activates while the layer key is held. Tapping the key produces the normal key. +* Tapping the `:` key once yields `:`, tapping it twice yields `;`. +* The **Lead** key allows me to type in a sequence of keys, and trigger some actions: + - `LEAD u` enters unicode input mode, by sending the GTK+ key sequence that does this. + - `LEAD l` uses the unicode input method to enter a `λ`. + - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` + - `LEAD y` types `\o/`. + - `LEAD w m` maximises the currently focused window. + - `LEAD a` makes the [ADORE layer](#adore-layer) the default. + - `LEAD v` prints the firmware version, the keyboard and the keymap. + - `LEAD d` toggles logging keypress positions to the HID console. + - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. + +## ADORE layer + +[](http://www.keyboard-layout-editor.com/#/gists/45681a17453d235925b6028dd83bf12a) + +While using the standard Dvorak layout, I encountered a number of inconveniences, and on this layer, I am playing with ideas to make the layout feel better. Initially, it was based on [Capewell-Dvorak][cpd], but that too, had shortcomings I was not happy with. So now this is something inbetween, with own observations thrown in. How it works out in the long run remains to be seen. + + [cpd]: http://www.michaelcapewell.com/projects/keyboard/layout_capewell-dvorak.htm + +Based on a week and a half of typing, the keys were rearranged, and the home row neatly spelled out **ADORE**, that gave the layout its name. + +## Hungarian layer + +[](http://www.keyboard-layout-editor.com/#/gists/b160f6ec90d58c127c114c89f66e9dc9) + +On this layer, the accented characters are at the same position as their base variant. For some, which can have other diatribes, the long one is on top, short's on bottom. Tapping any of the accented characters takes us back to the base layer. + +## Navigation and media layer + +[](http://www.keyboard-layout-editor.com/#/gists/c59c453f9fe1a3238ba1494e7e5c6892) + +This layer is primarily for navigating with the cursor or the mouse, and some media things. + +## One-handed layer + +[](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece) + +The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the `OTHER` key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half. + +The differences are as follows: + +* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier to tap. +* Most keys on the thumb cluster now have dual uses, and these do not change when switching sides: + - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held for longer than a normal tap. + - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap. +* The `Apps`/`BASE` key can be used to go back to the base layer, by long-tapping it. A short-tap will send the `App` key, as usual. + +## Steno layer + +[](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) + +This is to be used with [Plover](http://www.openstenoproject.org/plover/), nothing really fancy here. The **STENO** key toggles the layer on and off, and sends the toggle command to Plover too. + +## LED states + +The primary purpose of the LEDs is to show the modifier status, a secondary, to show which layer is active. Each modifier, `Shift`, `Alt` and `Control` each have their designated LEDs: the *red*, *green* and *blue*, respectively. When a modifier is in a one-shot state, the respective LED will turn on with a dimmer light. If the modifier is toggled on, the brightness of the LED turns full. + +For the layers, the following rules apply: + +* When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. +* When the [Hungarian layer](#hungarian-layer) is active, the *green* and *blue* LEDs are on. +* When the [Navigation and media layer](#navigation-and-media-layer) is active, the *red* and *green* ones are on. +* When the [One-handed layer](#one-handed-layer) is active, the *green* LED is on and bright, and either the *red* or the *blue* one is going to slowly blink, depending on the currently active side. +* For the [Steno layer](#steno-layer), all LEDs will be turned on. + +Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. + +# Tools + +## Heatmap + +When the keypress logging functionality is enabled (by `LEAD d`), the keyboard will output a line every time a key is pressed, containing the position of the key in the matrix. This allows one to collect this information, and build analytics over it, such as a heat map, including dead keys too. + +Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, simply point `tools/log-to-heatmap.py` to a base layout file (one is included in the `tools/` directory), and the key position log. The latter one can create by running `hid-listen`, and redirecting its output to a file. + + [kle]: http://www.keyboard-layout-editor.com/ + +The generated heatmap looks somewhat like this: + +  + +# Building + +To make my workflow easier, this layout is maintained in [its own repository][algernon:ez-layout]. To build it, you will need the [QMK][qmk] firmware checked out, and this repo either checked out to something like `keyboards/ergodox_ez/algernon-master`. One way to achieve that is this: + + [algernon:ez-layout]: https://github.com/algernon/ergodox-layout + [qmk]: https://github.com/jackhumbert/qmk_firmware + +``` +$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ cd qmk_firmware +$ git clone https://github.com/algernon/ergodox-layout.git \ + keyboards/ergodox_ez/keymaps/algernon-master +$ make KEYBOARD=ergodox_ez KEYMAP=algernon-master +``` + +From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware): + +``` +$ make KEYBOARD=ergodox_ez KEYMAP=algernon +``` + +## Using on Windows + +The keymap default to forcing NKRO, which seems to upset Windows, and except the modifiers, none of them work. If you experience this problem, recompile the firmware with `FORCE_NKRO=no` added to the `make` command line. + +# Changelog + +## v1.4 - 2016-07-29 + +* When toggling the key logging on or off, the LEDs will do a little dance. +* The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it. +* The `TAB`/`ARRW` key was turned into a tap-dance key, allowing one to toggle the **ARROW** layer on by double-tapping, and as such, avoid the need to hold the key. +* The `-`/`_` key was turned into a tap-dance key too. +* There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`. + +## v1.3 - 2016-07-06 + +* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs. +* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are. +* The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now. +* Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot. + +## v1.2 - 2016-06-22 + +* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows). +* The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. +* The `=` and `\` keys were swapped, `=` moved to the home row, on both the [base](#base-layer) and the **experimental** layers. +* The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access. +* The **Emacs** layer is gone, replaced by a simplified [navigation and media](#navigation-and-media-layer) layer. +* `LEAD v` types the firmware version, and the keymap version. +* On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. +* The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers. + +## v1.1 - 2016-06-14 + +* The keyboard starts in NKRO mode, bootmagic and other things are disabled. +* A [Steno](#steno-layer) layer was added, to be used with Plover. +* An **experimental** layer was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress. +* `LEAD y` types `\o/`. +* Some keys on the [Base](#base-layer) layer have been moved around: + - `?` moved to the left pinky, left of `Q`. + - `=` shifted one row down, but `F11` stayed where it was. + - `-` on the left half was replaced by `Tab`. + - `Tab`'s original position is taken by a `Media Next`/`Media Prev` key. + - `:` now inputs `;` when shifted. +* `ESC` cancels the [Hungarian](#hungarian-layer) layer too, not just modifiers. + +## v1.0 - 2016-05-26 + +Initial version. + +# License + +The layout, being a derivative of the original TMK firmware which is under the GPL-2+, this layout is under the GPL as well, but GPL-3+, rather than the older version. diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json new file mode 100644 index 000000000..544f61ce8 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json @@ -0,0 +1,533 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy <kbd@gergo.csillger.hu>", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 6 + }, + "<i class='mss mss-Unicode-Option-3'></i>", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 3, + "w": 1.5 + }, + "\n\n~\n`", + { + "t": "#0d0d0b" + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "L", + { + "x": 10.5 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 4 + }, + ">\n.", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "W", + { + "x": 8.5 + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "P" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "M", + { + "c": "#93c9b7", + "a": 4, + "h": 1.5 + }, + "{\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 6, + "w": 1.5 + }, + "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>", + { + "c": "#ffb2d2", + "a": 4, + "f": 3 + }, + "<\n,", + { + "x": 14.5, + "a": 6 + }, + "Y", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "I", + { + "x": 8.5, + "n": true + }, + "R", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "U", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "<i class='fa fa-arrows'></i>\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "a": 7, + "h": 1.5 + }, + "(", + { + "x": 4.5, + "h": 1.5 + }, + ")" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 10.5 + }, + "V" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "Z", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "K", + { + "x": 8.5 + }, + "G", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "J" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "X", + { + "x": 6.5 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5 + }, + "\n\n<i class='kb kb-Multimedia-Play-Pause'></i>", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 4, + "f": 3 + }, + "?\n/", + { + "x": 14.5, + "a": 6 + }, + "Q", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "w": 1.5 + }, + "<i class='kb kb-Multimedia-Stop'></i>" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": false, + "a": 5 + }, + ";\n:", + { + "x": 8.5 + }, + "_\n-", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n<i class='kb kb-logo-linux-debian fa-large'></i>" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>", + { + "h": 2 + }, + "<i class='fa fa-angle-double-up'></i>", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "1HAND" + ], + [ + { + "x": -3 + }, + "LEAD", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "<i class='kb kb-Return-2'></i>", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "HUN" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json b/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json new file mode 100644 index 000000000..148bb1f23 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/heatmap-base-layout.json @@ -0,0 +1,533 @@ +[ + { + "backcolor": "#ffffff", + "name": "ErgoDox - algernon's layout: Heatmap", + "author": "Gergely Nagy <kbd@gergo.csillger.hu>", + "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea", + "pcb": true, + "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" + }, + [ + { + "x": 3.5, + "c": "#a7d0db", + "fa": [ + 0, + 0, + 2 + ] + }, + "#\n3\nF3", + { + "x": 10.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4, + "fa": [ + 0, + 0, + 2 + ] + }, + "*\n8\nF8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "@\n2\nF2", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "$\n4\nF4", + { + "x": 8.5 + }, + "&\n7\nF7", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "(\n9\nF9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "%\n5\nF5", + { + "c": "#f9cd31", + "a": 7, + "f": 2 + }, + "STENO", + { + "x": 4.5, + "f": 6 + }, + "<i class='mss mss-Unicode-Option-3'></i>", + { + "c": "#7adabd", + "a": 4, + "f": 3, + "fa": [ + 0, + 0, + 2 + ] + }, + "^\n6\nF6" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "f": 3, + "w": 1.5 + }, + "\n\n~\n`", + { + "t": "#0d0d0b" + }, + "!\n1\nF1", + { + "x": 14.5 + }, + ")\n0\nF10", + { + "a": 7, + "w": 1.5 + }, + "F11" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 4 + }, + ">\n.", + { + "x": 10.5, + "a": 6 + }, + "C" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b", + "a": 4 + }, + "<\n,", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "a": 6 + }, + "P", + { + "x": 8.5 + }, + "G", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "R" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "Y", + { + "c": "#93c9b7", + "a": 4, + "h": 1.5 + }, + "{\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n]", + { + "c": "#7adabd", + "a": 6 + }, + "F" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "t": "#0d0d0b", + "f": 6, + "w": 1.5 + }, + "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>", + { + "c": "#ffb2d2", + "a": 4, + "f": 3 + }, + "\"\n'", + { + "x": 14.5, + "a": 6 + }, + "L", + { + "a": 4, + "w": 1.5 + }, + "|\n\\" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#a7d0db", + "t": "#000000", + "a": 6 + }, + "E", + { + "x": 10.5 + }, + "T" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "O", + { + "x": 1, + "c": "#7adabd", + "t": "#000000", + "n": true + }, + "U", + { + "x": 8.5, + "n": true + }, + "H", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "N" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "I", + { + "x": 6.5 + }, + "D" + ], + [ + { + "y": -0.875, + "c": "#ffb2d2", + "t": "#0d0d0b", + "fa": [ + 6 + ], + "w": 1.5 + }, + "<i class='fa fa-arrows'></i>\n\nTab", + { + "f": 3 + }, + "A", + { + "x": 14.5, + "f": 3 + }, + "S", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 6 + ], + "w": 1.5 + }, + "+\n=" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#93c9b7", + "t": "#000000", + "a": 7, + "h": 1.5 + }, + "(", + { + "x": 4.5, + "h": 1.5 + }, + ")" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#a7d0db", + "a": 6 + }, + "J", + { + "x": 10.5 + }, + "W" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "Q", + { + "x": 1, + "c": "#7adabd", + "t": "#000000" + }, + "K", + { + "x": 8.5 + }, + "M", + { + "x": 1, + "c": "#bfbad1", + "t": "#0d0d0b" + }, + "V" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#7adabd", + "t": "#000000" + }, + "X", + { + "x": 6.5 + }, + "B" + ], + [ + { + "y": -0.875, + "c": "#ffb07b", + "f": 9, + "w": 1.5 + }, + "\n\n<i class='kb kb-Multimedia-Play-Pause'></i>", + { + "c": "#ffb2d2", + "t": "#0d0d0b", + "a": 4, + "f": 3 + }, + "?\n/", + { + "x": 14.5, + "a": 6 + }, + "Z", + { + "c": "#ffb07b", + "t": "#000000", + "f": 9, + "w": 1.5 + }, + "<i class='kb kb-Multimedia-Stop'></i>" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#d9dae0", + "g": true, + "a": 7, + "f": 3 + }, + "", + { + "x": 10.5 + }, + "" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "", + { + "x": 1, + "c": "#d4872a", + "g": false, + "a": 5 + }, + ";\n:", + { + "x": 8.5 + }, + "_\n-", + { + "x": 1, + "c": "#d9dae0", + "g": true, + "a": 7 + }, + "" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "", + {}, + "", + { + "x": 14.5 + }, + "", + {}, + "" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#f9cd31", + "g": false + }, + "Alt", + { + "a": 4, + "fa": [ + 0, + 0, + 0, + 9 + ] + }, + "\n\n\n<i class='kb kb-logo-linux-debian fa-large'></i>" + ], + [ + { + "c": "#d4872a", + "a": 7, + "f": 9, + "h": 2 + }, + "<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>", + { + "h": 2 + }, + "<i class='fa fa-angle-double-up'></i>", + { + "c": "#f9cd31", + "f": 3 + }, + "Ctrl" + ], + [ + { + "x": 2, + "c": "#e26757" + }, + "ESC" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "MEDIA", + {}, + "1HAND" + ], + [ + { + "x": -3 + }, + "LEAD", + { + "c": "#d4872a", + "f": 9, + "h": 2 + }, + "<i class='kb kb-Return-2'></i>", + { + "f": 3, + "h": 2 + }, + "SPC" + ], + [ + { + "x": -3, + "c": "#f9cd31", + "f": 2 + }, + "HUN" + ] +] diff --git a/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py new file mode 100755 index 000000000..a13d12e81 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/log-to-heatmap.py @@ -0,0 +1,145 @@ +#! /usr/bin/env python +import json +import os +import sys +import re + +from math import floor + +cr_coord_map = [ + [ + # Row 0 + [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], + [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], + ], + [ + # Row 1 + [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], + [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], + ], + [ + # Row 2 + [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], + [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], + ], + [ + # Row 3 + [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], + [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], + ], + [ + # Row 4 + [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], + [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], + ], + [ + # Row 5 + [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], + [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], + ], +] + +def set_attr_at(j, b, n, attr, fn, val): + blk = j[b][n] + if attr in blk: + blk[attr] = fn(blk[attr], val) + else: + blk[attr] = fn(None, val) + +def coord(col, row): + return cr_coord_map[row][col] + +def set_attr(orig, new): + return new + +def set_bg(j, (b, n), color): + set_attr_at(j, b, n, "c", set_attr, color) + #set_attr_at(j, b, n, "g", set_attr, False) + +def _set_tap_info(o, count, cap): + ns = 4 - o.count ("\n") + return o + "\n" * ns + "%.02f%%" % (float(count) / float(cap) * 100) + +def set_tap_info(j, (b, n), count, cap): + j[b][n + 1] = _set_tap_info (j[b][n + 1], count, cap) + +def heatmap_color (v): + colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] + fb = 0 + if v <= 0: + idx1, idx2 = 0, 0 + elif v >= 1: + idx1, idx2 = len(colors) - 1, len(colors) - 1 + else: + val = v * (len(colors) - 1) + idx1 = int(floor(val)) + idx2 = idx1 + 1 + fb = val - float(idx1) + + r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] + g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] + b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] + + r, g, b = [x * 255 for x in r, g, b] + return "#%02x%02x%02x" % (r, g, b) + +# Load the keylog +def load_keylog(fname, restrict_row): + keylog = {} + total = 0 + with open(fname, "r") as f: + lines = f.readlines() + for line in lines: + m = re.search ('KL: col=(\d+), row=(\d+)', line) + if not m: + continue + (c, r) = (int(m.group (2)), int(m.group (1))) + if restrict_row != None and r != int(restrict_row): + continue + if (c, r) in keylog: + keylog[(c, r)] = keylog[(c, r)] + 1 + else: + keylog[(c, r)] = 1 + total = total + 1 + return total / 2, keylog + +def l_flat(s): + f = s.split("\n") + return ", ".join (f) + +def main(base_fn, log_fn, restrict_row = None): + + with open(base_fn, "r") as f: + layout = json.load (f) + + ## Reset colors + for row in cr_coord_map: + for col in row: + if col != []: + set_bg (layout, col, "#d9dae0") + #set_attr_at (layout, col[0], col[1], "g", set_attr, True) + + total, log = load_keylog (log_fn, restrict_row) + max_cnt = 0 + for (c, r) in log: + max_cnt = max(max_cnt, log[(c, r)]) + + # Create the heatmap + for (c, r) in log: + coords = coord(c, r) + b, n = coords + cap = max_cnt + v = float(log[(c, r)]) / cap + print >> sys.stderr, "%s => %d/%d => %f = %s" % (l_flat(layout[b][n+1]), log[(c,r)], cap, v, heatmap_color(v)) + set_bg (layout, coord(c, r), heatmap_color (v)) + set_tap_info (layout, coord (c, r), log[(c, r)], total) + + print json.dumps(layout) + +if __name__ == "__main__": + if len(sys.argv) < 3: + print """Log to Heatmap -- creates a heatmap out of keyboard logs + +Usage: log-to-heatmap.py base-layout.json logfile [row] >layout.json""" + sys.exit (1) + main(*sys.argv[1:]) diff --git a/keyboards/ergodox/keymaps/algernon/tools/max-focused b/keyboards/ergodox/keymaps/algernon/tools/max-focused new file mode 100755 index 000000000..4d5220aa8 --- /dev/null +++ b/keyboards/ergodox/keymaps/algernon/tools/max-focused @@ -0,0 +1,5 @@ +#! /bin/sh +WIN="$(xdotool getactivewindow)" +wmctrl -i -r ${WIN} -b remove,maximized_vert,maximized_horz +xdotool windowsize ${WIN} 100% 100% +wmctrl -i -r ${WIN} -b add,maximized_vert,maximized_horz diff --git a/keyboards/ergodox/keymaps/andrew_osx/keymap.c b/keyboards/ergodox/keymaps/andrew_osx/keymap.c new file mode 100644 index 000000000..750155d98 --- /dev/null +++ b/keyboards/ergodox/keymaps/andrew_osx/keymap.c @@ -0,0 +1,187 @@ +// Netable differences vs. the default firmware for the ErgoDox EZ: +// 1. The Cmd key is now on the right side, making Cmd+Space easier. +// 2. The media keys work on OSX (But not on Windows). +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | '" | | '" | 6 | 7 | 8 | 9 | 0 | BkSp | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | ~L1 | | ~L1 | Y | U | I | O | P | - | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Ctrl/Esc| A | S | D | F | G |------| |------| H | J | K | L |; / L2| / | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| Alt |AltShf| Left | Right| | Up | Down | [ | ] | L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Esc |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | ( | | { | | | + * | Space| LGui |------| |------| RGui |Enter | + * | | | ) | | } | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_QUOT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_FN1, + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_LALT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_LPRN, + KC_SPC,KC_LGUI,KC_RPRN, + // right hand + KC_QUOT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_FN1, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_BSLS, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, TG(1), + KC_ESC, CTL_T(KC_ESC), + KC_LCBR, + KC_RCBR,KC_RGUI, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/bepo/bepo.png b/keyboards/ergodox/keymaps/bepo/bepo.png Binary files differnew file mode 100644 index 000000000..3df7aa609 --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo/bepo.png diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c new file mode 100644 index 000000000..2d88fc10e --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -0,0 +1,311 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_bepo.h" + +#define BASE 0 // default layer +#define QWER 1 // qwerty compat layer +#define SQWER 2 // shifted qwerty compat layer +#define AQWER 3 // alted qwerty compat layer +#define FNAV 4 // function / navigation keys +#define NUM 5 // numeric keypad keys +#define MSE 6 // mouse keys + +#define KP_00 0 +#define CA_Fx 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | B |E_ACUT| P | O |E_GRAV|Backsp| |CapsLo| ^ | V | D | L | J | Z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | W | A | U | I | E | , |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | E_CIRC |A_GRAV| Y | X | . | K | | | | ' | Q | G | H | F | C_CEDIL| + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | L_Num| | CA_Fx| | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// Left hand +BP_DOLLAR, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, KC_DEL, +BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, +BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, +BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, +TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, + KC_ESC, MO(MSE), + MO(NUM), + KC_SPC, KC_LSHIFT, MO(FNAV), +// Right hand + KC_SLCK, BP_AT, BP_PLUS, BP_MINUS, BP_SLASH, BP_ASTR, BP_EQUAL, + KC_CAPSLOCK, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, + BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, + KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, + BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_NO, KC_INS, +M(CA_Fx), +MO(FNAV), KC_RSHIFT, KC_ENTER), +/* Keymap 1: QWERTY system compatibility layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | b | e | p | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | e | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e | a | y | x | . | k | | | | ' | q | g | h | f | c | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | L_Num| | | | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[QWER] = KEYMAP( +// Left hand +KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LPRN, KC_RPRN, KC_DEL, +KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, +KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, +KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, +KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, + KC_ESC, MO(MSE), + MO(NUM), + KC_SPC, MO(SQWER), MO(FNAV), +// Right hand + KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, + KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, + KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, + MO(AQWER), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_NO, KC_INS, +KC_TRNS, +MO(FNAV), MO(SQWER), KC_ENTER), +/* Keymap 2: QWERTY shifted system compatibility layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ` | B | E | P | O | E |Backsp| |CapsLo| ! | V | D | L | J | Z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | W | A | U | I | E | ; |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | L_Num| | | | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[SQWER] = KEYMAP( +// Left hand +KC_HASH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, +KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, +S(KC_W), S(KC_A), S(KC_U), S(KC_I), S(KC_E), KC_SCOLON, +S(KC_E), S(KC_A), S(KC_Y), S(KC_X), KC_COLON, S(KC_K), S(KC_TAB), +KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, +// Right hand + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_EXLM, S(KC_V), S(KC_D), S(KC_L), S(KC_J), S(KC_Z), + S(KC_C), S(KC_T), S(KC_S), S(KC_R), S(KC_N), S(KC_M), + KC_TRNS, S(KC_SLASH), S(KC_Q), S(KC_G), S(KC_H), S(KC_F), S(KC_C), + S(KC_RALT), S(KC_RCTL), S(KC_RGUI), KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS), +/* Keymap 3: QWERTY alted system compatibility layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | € | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | L_Num| | | | | + * | _ |LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AQWER] = KEYMAP( +// Left hand +KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, +KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, +KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, +KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, +KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, + KC_ESC, MO(MSE), + MO(NUM), + KC_UNDS, MO(SQWER), MO(FNAV), +// Right hand + KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, + KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, + KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, + KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_NO, KC_INS, +KC_TRNS, +MO(FNAV), MO(SQWER), KC_ENTER), +/* Keymap 4: function / navigation layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 |VolMut| | | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | |VolDwn| | | PgUp | Home | Up | End | F11 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| PgDn | Left | Down | Right| F12 | | + * |--------+------+------+------+------+------| VolUp| | |------+------+------+------+------+--------| + * | | Undo | Cut | Copy | Paste| | | | | | | | | | | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | | | | | | | | | | | | | | | | | | + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[FNAV] = KEYMAP( +// Left hand +KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MUTE, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_NO, KC_VOLD, +KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_TRNS, KC_TRNS, +// Right hand + KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NO, + KC_NO, KC_PGUP, KC_HOME, KC_UP, KC_END, KC_F11, KC_NO, + KC_PGDOWN, KC_LEFT, KC_DOWN, KC_RIGHT, KC_F12, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, +KC_NO, KC_NO, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_NO), +/* Keymap 5: numeric layer, sends keypad codes + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | + | - | / | * | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | 7 | 8 | 9 | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | 4 | 5 | 6 | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | 1 | 2 | 3 | | | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | | | | | | | | | | | | | 0 | 00 | . | | | + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | | | | | | + * | | |------| |------| | Enter| + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUM] = KEYMAP( +// Left hand +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, + KC_NO, KC_NO, + KC_TRNS, + KC_NO, KC_TRNS, KC_NO, +// Right hand + KC_NO, KC_NO, KC_KP_PLUS, KC_KP_MINUS, KC_KP_SLASH, KC_KP_ASTERISK, KC_NO, + KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_NO, KC_NO, + KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_NO, KC_NO, + KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_NO, KC_NO, + KC_KP_0, M(KP_00), KC_KP_COMMA, KC_NO, KC_NO, +KC_NO, KC_NO, +KC_NO, +KC_NO, KC_TRNS, KC_KP_ENTER), +/* Keymap 6: mouse layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | |LClick| Up |RClick| WhUp | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | Left | Down | Right|WhDown| | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | | | | | | | | | | | | | | | | | | + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[MSE] = KEYMAP( +// Left hand +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, + KC_NO, KC_TRNS, + KC_NO, + KC_NO, KC_TRNS, KC_NO, +// Right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_NO, + KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, +KC_NO, KC_NO, +KC_NO, +KC_NO, KC_TRNS, KC_NO) +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case KP_00: + if (record->event.pressed) { + return MACRO( T(KP_0), D(KP_0), END ); + } else { + return MACRO( U(KP_0), END ); + } + break; + case CA_Fx: + if (record->event.pressed) { + layer_on(FNAV); + return MACRO( D(LALT), D(LCTL), END ); + } else { + layer_off(FNAV); + return MACRO( U(LCTL), U(LALT), END ); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; diff --git a/keyboards/ergodox/keymaps/bepo/readme.md b/keyboards/ergodox/keymaps/bepo/readme.md new file mode 100644 index 000000000..4a18cd80f --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo/readme.md @@ -0,0 +1,34 @@ +# BEPO keymap for the ErgoDox + +This keymap has been made for the BEPO layout (http://bepo.fr), which is an ergonomic french keyboard layout based on Dvorak rules. As it's made for french people, the following of this readme will be in french. + +# Disposition BÉPO pour l'ErgoDox + +Cette keymap a été pensée pour la disposition BÉPO (http://bepo.fr), qui est une disposition de clavier francophone, ergonomique et libre, élaborée selon la méthode Dvorak. L'adaptation de cette disposition à l'ErgoDox a été réalisée en conservant les points forts du clavier TypeMatrix 2030 (très répandu dans la communauté bépo, avec un excellent rapport ergonomie / prix) voir en réglant certains de ses défauts (3 colonnes pour l'auriculaire droit et touche "Ê") et en apportant son lot de nouveautés (compatibilité avec les systèmes azerty et qwerty). + +Particularités +-------------- + +Touches de repos des pouces : "espace" à gauche et "entrée" à droite. + +Placement des touches de combinaison ("Shift", "Alt", "Ctrl"...) adapté aux pouces, et permettant de conserver chaque doigt pour les rangées de lettres auxquelles ils sont assignés sans avoir à changer la touche de combinaison de côté (exemple : "A" majuscule puis "M" majuscule avec les auriculaires et un seul appui d'une touche "Shift"). + +Les touches "Alt" et "Alt Gr" sont accessibles avec les pouces sur la rangée du bas comme sur la TypeMatrix 2030, avec une symétrie gauche / droite. + +Les touches "Ctrl" sont placées sur la même ligne que les touche "Alt" et "Alt Gr" comme sur un clavier clasique, elles sont accessibles aux pouces sur la rangée du bas (moins éloigné que le groupe de touches de pouces pour des petites mains). + +Les touches "Backspace" et "Delete" sont placées comme sur la TypeMatrix 2030, du côté gauche uniquement (pour laisser celles de la main droite servir de {caps,num,scroll}lock puisqu'elles ont des LED). + +La touche "Tab" est placée comme sur la TypeMatrix 2020. + +Meilleure symétrie et accessibilité que la TypeMatrix 2030 : les touches "W" et "%" ont dû être déplacées du côté gauche en raison du nombre de touches de l'ErgoDox, mais l'auriculaire droit ne gère maintenant que deux colonnes de touches au lieu de trois. La touche "Ê" redevient accessible sur la même rangée que les autres lettres, comme sur un clavier classique en disposition bépo. Les lettres, chiffres et symboles sont tous regroupés sur 4 lignes et 6 colonnes pour chaque main, et la première rangée de lettres à la main gauche conserve une identité visuelle "BÉPO". + +Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à F10 sont placées de façon logique par rapport aux chiffres 1 à 0. Cette même touche permet l'accès aux touches directionnelles sans déplacer la main droite. Les touches "Home" et "End" sont placées de la même façon que sur une TypeMatrix 2030 par rapport aux touches directionnelles. Les touches "Page Up" et "Page Down" sont également accessibles facilement sans déplacer la main droite. Les fonctions "VolUp" et "VolDown" sont placées comme sur la TypeMatrix 2030, avec la fonction "Mute" juste au dessus. Les fonctions "Undo", "Cut", "Copy" et "Paste" sont placées côte à côte comme elles le seraient sur un clavier QWERTY en combinaison avec la touche "Ctrl" (à l'emplacement des lettres "Z", "X", "C" et "V"). Par rapport au layout "SpaceFN", l'utilisation d'une touche de fonction dédiée au pouce permet de ne pas ajouter de latence, et la touche espace reste compatible avec les jeux (action au moment de l'appui et possibilité d'appui long). + +Touche de fonction permettant l'accès au pavé numérique comme sur la TypeMatrix 2030, mais sans avoir à déplacer la main droite : avec les doigts sur la rangée de repos, possibilité de saisir les chiffres "4", "5" et "6" comme sur un pavé numérique classique. Le double "0" de la TypeMatrix a été conservé, et gagne une possibilité de répétition en simples "0". + +L'appui sur une touche permet de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle. + +TODO : couche de compatibilité pour utiliser la disposition BÉPO sur un système configuré pour un clavier AZERTY. + +> Olivier Smedts <olivier@gid0.org> diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/Makefile b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile new file mode 100644 index 000000000..6c0a79b11 --- /dev/null +++ b/keyboards/ergodox/keymaps/coderkun_neo2/Makefile @@ -0,0 +1,2 @@ +SLEEP_LED_ENABLE = no +UNICODE_ENABLE = yes diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c new file mode 100644 index 000000000..2ac06eef8 --- /dev/null +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -0,0 +1,281 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "led.h" +#include "keymap_extras/keymap_neo2.h" + +// Layer names +#define BASE 0 // default layer +#define PMQ 1 // poor man’s QWERTZ +#define PMN 2 // poor man’s Neo +#define FMU 3 // FMU layer +#define NHL 4 // Neo’s software layer 4 rebuilt in Hardware + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Layer 0: default + * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ + * │ TAB │ 1 │ 2 │ 3 │ 4 │ 5 │ ` │ │ ´ │ 6 │ 7 │ 8 │ 9 │ 0 │ BKSPC │ + * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ + * │ Y │ X │ V │ L │ C │ W │ HOM │ │ END │ K │ H │ G │ F │ Q │ ß │ + * ├───────┼─────┼─────┼─────╆─────╅─────┤ E │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ + * │ Mod3 │ U │ I │ A │ E │ O ├─────┤ ├─────┤ S │ N │ R │ T │ D │ Mod3 │ + * ├───────┼─────┼─────┼─────╄─────╃─────┤ TL2 │ │ TL3 ├─────╄─────╃─────┼─────┼─────┼───────┤ + * │ LSHFT │ Ü │ Ö │ Ä │ P │ Z │ │ │ │ B │ M │ , │ . │ J │ Shift │ + * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ + * │ CTL │ ALT │ MO1 │ Win │ Mod4│ │ Mod4│ Win │ MO1 │ Alt │ CTL │ + * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ + * │ ← │ ↑ │ │ ↓ │ → │ + * ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐ + * │ │ │ ─ │ │ ─ │ │ │ + * │ SPC │ RTN ├─────┤ ├─────┤ RTN │ SPC │ + * │ │ │ HYP │ │ MEH │ │ │ + * └─────┴─────┴─────┘ └─────┴─────┴─────┘ + */ +[BASE] = KEYMAP( + // left hand + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, NEO_GRV, + NEO_Y, NEO_X, NEO_V, NEO_L, NEO_C, NEO_W, KC_HOME, + NEO_L1_L, NEO_U, NEO_I, NEO_A, NEO_E, NEO_O, + KC_LSFT, NEO_UE, NEO_OE, NEO_AE, NEO_P, NEO_Z, TG(PMQ), + KC_LCTL, KC_LALT,MO(FMU),KC_LGUI,NEO_L2_L, + KC_LEFT, KC_UP, + KC_MINS, + KC_SPC, KC_ENT, ALL_T(KC_NO), + // right hand + NEO_ACUT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_END, NEO_K, NEO_H, NEO_G, NEO_F, NEO_Q, NEO_SS, + NEO_S, NEO_N, NEO_R, NEO_T, NEO_D, NEO_L1_R, + TG(PMN), NEO_B, NEO_M, KC_COMM,KC_DOT, NEO_J, KC_RSFT, + NEO_L2_R,KC_RGUI,MO(FMU),KC_RALT,KC_RCTL, + KC_DOWN, KC_RGHT, + KC_MINS, + MEH_T(KC_NO),KC_ENT,KC_SPC + ), + +/* Layer 1: poor man’s QWERTZ + * based on kaimi’s layout + * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ + * │ TAB │ 1 │ 2 │ 3 │ 4 │ 5 │ ` │ │ ´ │ 6 │ 7 │ 8 │ 9 │ 0 │ BKSPC │ + * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ + * │ C │ P │ T │ F │ K │ L │ HOM │ │ END │ B │ A │ S │ G │ V │ Y │ + * ├───────┼─────┼─────┼─────╆─────╅─────┤ E │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ + * │ Mod3 │ D │ H │ Ö │ O │ I ├─────┤ ├─────┤ U │ - │ Z │ E │ X │ Mod3 │ + * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ + * │ LSHFT │ Ä │ Q │ R │ W │ N │ │ │ │ J │ M │ , │ . │ ẞ │ Shift │ + * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ + * │ CTL │ ALT │ MO1 │ Win │ MO4 │ │ M04 │ Win │ MO1 │ Alt │ CTL │ + * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ + * │ ← │ ↑ │ │ ↓ │ → │ + * ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐ + * │ │ │ ─ │ │ ─ │ │ │ + * │ SPC │ RTN ├─────┤ ├─────┤ RTN │ SPC │ + * │ │ │ HYP │ │ MEH │ │ │ + * └─────┴─────┴─────┘ └─────┴─────┴─────┘ + */ +[PMQ] = KEYMAP( + // left hand + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_EQL, + DE_C, DE_P, DE_T, DE_F, DE_K, DE_L, KC_HOME, + NEO_L1_L, DE_D, DE_H, DE_OE, DE_O, DE_I, + KC_LSFT, DE_AE, DE_Q, DE_R, DE_W, DE_N, KC_TRNS, + KC_LCTL, KC_LALT,MO(FMU),KC_LGUI,MO(NHL), + KC_LEFT, KC_UP, + KC_MINS, + KC_SPC, KC_ENT, ALL_T(KC_NO), + // right hand + DE_ACUT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_END, DE_B, DE_A, DE_S, DE_G, DE_V, DE_Y, + DE_U, DE_MINS,DE_Z, DE_E, DE_X, NEO_L1_R, + KC_TRNS, DE_J, DE_M, DE_COMM,DE_DOT, DE_SS, KC_RSFT, + MO(NHL),KC_RGUI,MO(FMU),KC_RALT,KC_RCTL, + KC_DOWN, KC_RGHT, + KC_MINS, + MEH_T(KC_NO),KC_ENT,KC_SPC + ), + +/* Layer 2: poor man’s Neo + * based on kaimi’s layout + * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ + * │ TAB │ 1 │ 2 │ 3 │ 4 │ 5 │ ` │ │ ´ │ 6 │ 7 │ 8 │ 9 │ 0 │ BKSPC │ + * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ + * │ Y │ X │ V │ L │ C │ W │ HOM │ │ END │ K │ H │ G │ F │ Q │ ß │ + * ├───────┼─────┼─────┼─────╆─────╅─────┤ E │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ + * │ Mod3 │ U │ I │ A │ E │ O ├─────┤ ├─────┤ S │ N │ R │ T │ D │ Mod3 │ + * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ + * │ LSHFT │ Ü │ Ö │ Ä │ P │ Z │ │ │ │ B │ M │ , │ . │ J │ Shift │ + * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ + * │ CTL │ ALT │ MO1 │ Win │ MO4 │ │ M04 │ Win │ MO1 │ Alt │ CTL │ + * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ + * │ ← │ ↑ │ │ ↓ │ → │ + * ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐ + * │ │ │ ─ │ │ ─ │ │ │ + * │ SPC │ RTN ├─────┤ ├─────┤ RTN │ SPC │ + * │ │ │ HYP │ │ MEH │ │ │ + * └─────┴─────┴─────┘ └─────┴─────┴─────┘ + */ +[PMN] = KEYMAP( + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_EQL, + DE_Y, DE_X, DE_V, DE_L, DE_C, DE_W, KC_HOME, + KC_NO, DE_U, DE_I, DE_A, DE_E, DE_O, + KC_LSFT, DE_UE, DE_OE, DE_AE, DE_P, DE_Z, KC_TRNS, + KC_LCTL, KC_LALT,MO(FMU),KC_LGUI,MO(NHL), + KC_LEFT, KC_UP, + KC_MINS, + KC_SPC, KC_ENT, ALL_T(KC_NO), + // right hand + DE_ACUT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_END, DE_K, DE_H, DE_G, DE_F, DE_Q, DE_SS, + DE_S, DE_N, DE_R, DE_T, DE_D, KC_NO, + KC_TRNS, DE_B, DE_M, KC_COMM,KC_DOT, DE_J, KC_RSFT, + MO(NHL),KC_RGUI,MO(FMU),KC_RALT,KC_RCTL, + KC_DOWN, KC_RGHT, + KC_MINS, + MEH_T(KC_NO),KC_ENT,KC_SPC + ), + +/* Layer 3: F-keys, Mouse and Unicode + * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ + * │ │ │ │ │ ✕ │ │ │ │ │ │ F9 │ F10 │ F11 │ F12 │ │ + * ├───────┼─────┼─────┼─────╆─────╅─────┤ │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ + * │ │ │ │ │ ✓ │ ├─────┤ ├─────┤ │ F5 │ F6 │ F7 │ F8 │ │ + * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ + * │ │ │ │ │ │ │ │ │ │ │ F1 │ F2 │ F3 │ F4 │ │ + * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ + * │ │ │(MO1)│ │(MO4)│ │(MO4)│ │(MO1)│ │ │ + * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ + * │ Ms← │ Ms↑ │ │ Ms↓ │ Ms→ │ + * ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐ + * │ │ │ MLC │ │ MRC │ │ │ + * │ │ ├─────┤ ├─────┤ │ │ + * │ │ │ │ │ │ │ │ + * └─────┴─────┴─────┘ └─────┴─────┴─────┘ + */ +[FMU] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2713),KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,UC(0x2715),KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_MS_L, KC_MS_U, + KC_BTN1, + KC_TRNS,KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS,KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS,KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_MS_D, KC_MS_R, + KC_BTN2, + KC_TRNS, KC_TRNS,KC_TRNS + ), + +/* Layer 4: Neo’s software layer 4 rebuilt in Hardware + * based on kaimi’s layout + * ┌───────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬───────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├───────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼───────┤ + * │ │ PgUp│ BSpc│ ↑ │ Del │ PgDn│ │ │ │ │ 7 │ 8 │ 9 │ + │ − │ + * ├───────┼─────┼─────┼─────╆─────╅─────┤ │ │ ├─────╆─────╅─────┼─────┼─────┼───────┤ + * │ │ Home│ ← │ ↓ │ → │ End ├─────┤ ├─────┤ │ 4 │ 5 │ 6 │ , │ . │ + * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│ │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤ + * │ │ Esc │ Tab │ Ins │ Ret │ Undo│ │ │ │ │ 1 │ 2 │ 3 │ │ │ + * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘ └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘ + * │ │ │(MO1)│ │(MO4)│ │(MO4)│ │(MO1)│ │ │ + * └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘ + * │ │ │ │ │ │ + * ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐ + * │ │ │ │ │ │ │ │ + * │ │ ├─────┤ ├─────┤ │ │ + * │ │ │ │ │ │ │ │ + * └─────┴─────┴─────┘ └─────┴─────┴─────┘ + */ +[NHL] = KEYMAP( + // left hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_PGUP,KC_BSPC,KC_UP, KC_DELT,KC_PGDN,KC_NO, + KC_NO, KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, + KC_NO, KC_ESC, KC_TAB, KC_INS, KC_ENT, KC_UNDO,KC_TRNS, + KC_NO, KC_NO, KC_TRNS,KC_NO, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_7, KC_8, KC_9, DE_PLUS,DE_MINS, + KC_NO, KC_4, KC_5, KC_6, KC_COMM,KC_DOT, + KC_TRNS, KC_NO, KC_1, KC_2, KC_3, KC_NO, KC_NO, + KC_TRNS,KC_NO, KC_TRNS,KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [BASE] = ACTION_FUNCTION(BASE), + [PMQ] = ACTION_FUNCTION(PMQ), + [PMN] = ACTION_FUNCTION(PMN), + [FMU] = ACTION_LAYER_TAP_TOGGLE(FMU), + [NHL] = ACTION_LAYER_TAP_TOGGLE(NHL) +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } + else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) +{ + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case FMU: + ergodox_right_led_1_on(); + break; + case PMQ: + ergodox_right_led_2_on(); + break; + case PMN: + ergodox_right_led_3_on(); + break; + default: + if(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) { + ergodox_led_all_set(LED_BRIGHTNESS_HI); + ergodox_right_led_1_on(); + } + else { + ergodox_board_led_off(); + } + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/readme.md b/keyboards/ergodox/keymaps/coderkun_neo2/readme.md new file mode 100644 index 000000000..2a4d3a535 --- /dev/null +++ b/keyboards/ergodox/keymaps/coderkun_neo2/readme.md @@ -0,0 +1,31 @@ +# coderkun’s Neo2 layout for the ErgoDox EZ + +The idea of this layout is to use it for [Neo2](http://www.neo-layout.org) but also provide layers to use QWERTZ with activated Neo driver and to use (basic) Neo when no driver is available (standard QWERTZ driver is active) (e. g. on other computers, in virtual machines) and to make heavily use of thumb keys. + +The main goal of the default layer is to provide a complete symmetric layout with each modifier equally placed for both hands (mirror, of course). + +It also features a layer for additional keys like F-keys (F1 – F12), some mouse keys and (hopefully in the near future) some useful Unicode symbols. + + +## Layers + +0. Default layer for Neo2 +1. Poor man’s QWERTZ +2. Poor man’s Neo +3. F-keys, mouse keys und Unicode symbols +4. Neo’s software layers 4 rebuilt in hardware + + +## Build + +1. Enable Unicode in Makefile + + ``` + UNICODE_ENABLE = yes + ``` +2. Build as usual + + ``` + make clean + make KEYMAP=coderkun_neo2 + ``` diff --git a/keyboards/ergodox/keymaps/colemak/keymap.c b/keyboards/ergodox/keymaps/colemak/keymap.c new file mode 100644 index 000000000..7ef81ab4b --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | F | P | G | L1 | | L1 | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | R | S | T | D |------| |------| H | N | E | I |O / L2| ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | K | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_H, KC_N, KC_E, KC_I, LT(MDIA, KC_O), KC_QUOT, + MEH_T(KC_NO),KC_K, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/colemak/readme.md b/keyboards/ergodox/keymaps/colemak/readme.md new file mode 100644 index 000000000..e28b2f085 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak/readme.md @@ -0,0 +1,4 @@ +# ErgoDox EZ Colemak Configuration + +Colemak layout with same layers as default ergodox ez keymap. + diff --git a/keyboards/ergodox/keymaps/colemak_osx_pc_no/keyboard-layout.png b/keyboards/ergodox/keymaps/colemak_osx_pc_no/keyboard-layout.png Binary files differnew file mode 100644 index 000000000..57df5a1f9 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_osx_pc_no/keyboard-layout.png diff --git a/keyboards/ergodox/keymaps/colemak_osx_pc_no/keymap.c b/keyboards/ergodox/keymaps/colemak_osx_pc_no/keymap.c new file mode 100644 index 000000000..eb0156c45 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_osx_pc_no/keymap.c @@ -0,0 +1,264 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_norwegian.h" + +#define BASE 0 // default layer +#define BASE_MAC 1 // default layer mac +#define NUMB_SYMB 2 // numbers and symbols +#define NUMB_SYMB_MAC 3 // numbers and symbols mac +#define FUNCTION 4 // function keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Keymap 0: Basic layer PC + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | [ | ] | { | } | * |Mac/PC| | ^ | $ | ( | ) | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ? | Q | W | F | P | G | " | | ' | J | L | U | Y | Å | Æ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | : | A | R | S | T | D |------| |------| H | N | E | I | O | Ø | + * |--------+------+------+------+------+------| ; | | = |------+------+------+------+------+--------| + * | ! | Z | X | C | V | B | | | | K | M | RIGHT| DOWN | UP | _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Func | Lclk | Rclk | TAB |,/CTRL| | LEFT | Esc | ` | # | Num | + * `----------------------------------' `----------------------------------' + * ,-------------. ,--------------. + * | & | | | |Insert| / | + * ,------|------|------| |------+-------+------. + * | | | + | | Del | | | + * | Shift| ./Spc|------| |------| Enter |Space| + * | | |-/Alt | | Bspc | | | + * `--------------------' `---------------------' + */ +[BASE] = KEYMAP( + // left hand + NO_BSLS, NO_LBRC, NO_RBRC, NO_LCBR, NO_RCBR, NO_ASTR, TG(1), + NO_QUES, KC_Q, KC_W, KC_F, KC_P, KC_G, NO_QUO2, + NO_COLN, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_EXLM, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_SCLN, + MO(4), KC_BTN1, KC_BTN2, KC_TAB,GUI_T(KC_COMMA), + NO_AMPR, NO_PIPE, + NO_PLUS, + KC_FN1,CTL_T(KC_DOT),ALT_T(NO_MINS), + // right hand + KC_FN5, NO_DLR, NO_LPRN, NO_RPRN ,KC_FN3, KC_FN4,NO_AT, + NO_APOS, KC_J, KC_L, KC_U, KC_Y, NO_AA, NO_AE , + KC_H, KC_N, KC_E, KC_I, KC_O, NO_OSLH, + NO_EQL, KC_K, KC_M, KC_RIGHT, KC_DOWN, KC_UP, NO_UNDS, + KC_LEFT, KC_ESC, KC_FN7, KC_HASH, MO(2), + KC_INSERT, NO_SLSH, + KC_DELT, + KC_BSPC,KC_ENT,KC_SPC + ), +/* Keymap 1: Basic layer MACS (Same as pc, except for cmd/ctrl, which are swapped) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | | | { | } | | | | | $ | | | < | > | @ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | ' |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Func | | | |,/Ctrl| | | | ` | | Num | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | |./Cmd |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[BASE_MAC] = KEYMAP( + NO_BSLS_MAC, KC_TRNS,KC_TRNS, NO_LCBR_MAC,NO_RCBR_MAC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CTL_T(KC_COMMA), + KC_TRNS, NO_PIPE_MAC, + KC_TRNS, + KC_TRNS,GUI_T(KC_DOT) , KC_TRNS, + // right hand + KC_TRNS, NO_DLR_MAC, KC_TRNS,KC_TRNS,KC_FN8, KC_FN9,NO_AT_MAC, + NO_APOS_MAC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, NO_GRV_MAC, KC_TRNS, MO(3), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Number ++ layer pc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | % | | | | | | ~ | ´ | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 3 | 2 | 1 | 0 | |------| |------| | 5 | 6 | 7 | 8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | 4 | | | | | | 9 | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_SYMB] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_PERC, KC_TRNS , KC_TRNS, + KC_TRNS, KC_3 , KC_2 , KC_1 , KC_0 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_FN2, KC_FN6 , KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_5, KC_6, KC_7, KC_8, KC_TRNS, + KC_TRNS, KC_HOME, KC_9, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 3: Number ++ layer mac. Some keys have to be repeated from the pc symbol layer, since transient keys inherit from the layer we jump from, not the layer above. + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | % | | | | | | ~ | ´ | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 3 | 2 | 1 | 0 | |------| |------| | 5 | 6 | 7 | 8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | 4 | | | | | | 9 | END | PGDWN| PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | HOME | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMB_SYMB_MAC] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_PERC, KC_TRNS , KC_TRNS, + KC_TRNS, KC_3 , KC_2 , KC_1 , KC_0 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, KC_TRNS , KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_FN2, KC_FN10, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_5, KC_6, KC_7, KC_8, KC_TRNS, + KC_TRNS, KC_HOME, KC_9, KC_END, KC_PGDN, KC_PGUP, KC_TRNS, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 4: Function layer mac + pc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F3 | F2 | F1 | | |------| |------| | F5 | F6 | F7 | F8 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | F4 | | | | | | F9 | F10 | F11 | F12 | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[FUNCTION] = KEYMAP( + KC_5, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_TRNS, + KC_TRNS, KC_F3 , KC_F2 , KC_F1 , KC_TRNS , KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F4, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, NO_TILD, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +) +}; + +enum macro_id { + TILDE_NO, LESS_NO, GRTR_NO, CIRC_NO, ACUT_NO, GRV_NO, LESS_NO_MAC, GRTR_NO_MAC, ACUT_NO_MAC +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [2] = ACTION_MACRO(TILDE_NO), // Completed ~ character(pc and mac), no space needed. + [3] = ACTION_MACRO(LESS_NO), // < completed on keypress down, to avoid shifting the next character if it is not released first. + [4] = ACTION_MACRO(GRTR_NO), // > completed on keypress down, to avoid shifting the next character if it is not released first. + [5] = ACTION_MACRO(CIRC_NO), // Completed ^ character, no space needed. + [6] = ACTION_MACRO(ACUT_NO), // Completed ´ character, no space needed. + [7] = ACTION_MACRO(GRV_NO), // Completed ` character, no space needed. + [8] = ACTION_MACRO(LESS_NO_MAC), // < completed on keypress down, to avoid same button problem when typing <> quickly + [9] = ACTION_MACRO(GRTR_NO_MAC), // > completed on keypress down, to avoid same button problem when typing <> quickly + [10] = ACTION_MACRO(ACUT_NO_MAC), // Completed ´ character, no space needed +}; + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case TILDE_NO: + return (event.pressed ? MACRO( D(RALT), T(RBRC), U(RALT), T(SPC), END ) : MACRO_NONE); + case LESS_NO: + return (event.pressed ? MACRO( T(NUBS), END ) : MACRO_NONE); + case GRTR_NO: + return (event.pressed ? MACRO( D(LSFT), T(NUBS), U(LSFT), END ) : MACRO_NONE); + case CIRC_NO: + return (event.pressed ? MACRO( D(LSFT), T(RBRC), U(LSFT), T(SPC), END ) : MACRO_NONE); + case ACUT_NO: + return (event.pressed ? MACRO( D(RALT), T(EQL), U(RALT), T(SPC), END ) : MACRO_NONE); + case GRV_NO: + return (event.pressed ? MACRO( D(LSFT), T(EQL), T(SPC), U(LSFT), END ) : MACRO_NONE); + case LESS_NO_MAC: + return (event.pressed ? MACRO( T(GRV), END ) : MACRO_NONE); + case GRTR_NO_MAC: + return (event.pressed ? MACRO( D(LSFT), T(GRV), U(LSFT), END ) : MACRO_NONE); + case ACUT_NO_MAC: + return (event.pressed ? MACRO( T(EQL), T(SPC), END ) : MACRO_NONE); + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/keymaps/colemak_osx_pc_no/readme.md b/keyboards/ergodox/keymaps/colemak_osx_pc_no/readme.md new file mode 100644 index 000000000..48f095cae --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_osx_pc_no/readme.md @@ -0,0 +1,23 @@ +# Norwegian Colemak setup with osx/pc toggle + +## Motivation +I wanted a Norwegian Colemak setup that worked in a similar way on both my Mac and PC. I also wanted it to translate from a standard Norwegian keyboard OS setup. + +## Overview +The setup is created to be programmer friendly. +- Most of the symbols used in code can be activated without using layers or shift key. +- You can reach the IDE/OS shortcut activators(Ctrl, Win/Cmd, Alt, Shift) with the thumb. +- Navigation is prioritized, arrows are right below the home row. + +## PC/Mac toggle +The default setup is for Norwegian keyboard setting(not colemak variants) on a PC(Windows or Linux). Use the Mac/PC toggle button to switch between OSX and PC setup. The settings will be reverted to PC setup each time you restart/connect the keyboard. + +## Layers +Numbers and function buttons are on their own layers. The easiest way to switch layers(at least with my hands) in this setup, is to push your hand right below the little finger, on the layer switches. You will then have all your fingers free to type numbers or press function buttons. + +## Shift-key +Tap for the next character to be shifted, hold down for regular shift functionality + +## Layout + + diff --git a/keyboards/ergodox/keymaps/csharp_dev/csharp_dev.png b/keyboards/ergodox/keymaps/csharp_dev/csharp_dev.png Binary files differnew file mode 100644 index 000000000..6fba568fc --- /dev/null +++ b/keyboards/ergodox/keymaps/csharp_dev/csharp_dev.png diff --git a/keyboards/ergodox/keymaps/csharp_dev/csharp_dev_legend.png b/keyboards/ergodox/keymaps/csharp_dev/csharp_dev_legend.png Binary files differnew file mode 100644 index 000000000..b0a1c513c --- /dev/null +++ b/keyboards/ergodox/keymaps/csharp_dev/csharp_dev_legend.png diff --git a/keyboards/ergodox/keymaps/csharp_dev/keymap.c b/keyboards/ergodox/keymaps/csharp_dev/keymap.c new file mode 100644 index 000000000..e0c66f487 --- /dev/null +++ b/keyboards/ergodox/keymaps/csharp_dev/keymap.c @@ -0,0 +1,239 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define FKEYS 1 // F keys + macros + +#define MACRO_PUBLIC 10 +#define MACRO_PRIVATE 11 + +#define MACRO_STATIC 12 +#define MACRO_CONST 13 + +#define MACRO_VOID 14 +#define MACRO_VAR 15 +#define MACRO_STRING 16 + +#define MACRO_INT 17 +#define MACRO_FLOAT 18 +#define MACRO_BOOL 19 + +#define MACRO_RETURN 20 +#define MACRO_NULL 21 +#define MACRO_BREAK 22 + +#define MACRO_TODO 23 +#define MACRO_NEW 24 +#define MACRO_PARENTHESE 25 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ( | 1 | 2 | 3 | 4 | 5 | " | | Save | 6 | 7 | 8 | 9 | 0 | [ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ) | Q | W | E | R | T |Bkspa | | Del | Y | U | I | O | P | ] | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | { | A | S | D | F | G |------| |------| H | J | K | L | _ | Redo | + * |--------+------+------+------+------+------| / | | ; |------+------+------+------+------+--------| + * | } |Z~Alt | X | C | V | B | | | | N | M | ' | ! | ? | Undo | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Tab~CL| < | > | | | & | | = | + | - | * | L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |. ~L1 | , | |Home |End~L1| + * ,------|------|------| |------+------+------. + * | | | Copy | | UP | | | + * | Enter| Space|------| |------| Space|Enter | + * | ~WIN | ~LSFT| Past | | DOWN | ~LSFT| ~WIN | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_LPRN, KC_1, KC_2, KC_3, KC_4, KC_5, LSFT(KC_QUOTE), + KC_RPRN, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPACE, + KC_LCBR, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_RCBR, ALT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_SLASH, + CTL_T(KC_TAB), LSFT(KC_COMMA),LSFT(KC_DOT),KC_PIPE,KC_AMPR, + LT(1,KC_DOT), KC_COMM, + LCTL(KC_C), + GUI_T(KC_ENTER),SFT_T(KC_SPACE),LCTL(KC_V), + // right hand + LCTL(KC_S) , KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRACKET, + KC_DELETE, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRACKET, + KC_H, KC_J, KC_K, KC_L, KC_UNDS,LCTL(KC_Y), + KC_SCOLON,KC_N, KC_M, KC_QUOTE ,KC_EXLM , LSFT(KC_SLASH), LCTL(KC_Z), + KC_EQUAL,KC_PLUS , KC_MINUS,KC_ASTR , TG(1), + KC_HOME, LT(1,KC_END), + KC_UP, + KC_DOWN,SFT_T(KC_SPACE), GUI_T(KC_ENTER) + ), + +/* Keymap 1: F keys + macros + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | F1 | F2 | F3 | F4 | F5 | ` | | Calc | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab |Public|Static|string|int |return| | | |//TODO| | | | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |Privat|Const |var |float |null |------| |------|new | | | | | | + * |--------+------+------+------+------+------| \ | | ~ |------+------+------+------+------+--------| + * | | | |void |bool |break;| | | |(); | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | WIN | Alt | | | | PgUp | PgDw | Ins | PtSc | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | Cut | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| Left | Right| + * | | | | | | | | + * `--------------------' `--------------------' + */ +// FKEYS + MACROS +[FKEYS] = KEYMAP( + // left hand + KC_ESCAPE,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_GRAVE, + KC_TAB,M(MACRO_PUBLIC),M(MACRO_STATIC), M(MACRO_STRING),M(MACRO_INT),M(MACRO_RETURN),KC_TRNS, + KC_TRNS,M(MACRO_PRIVATE),M(MACRO_CONST), M(MACRO_VAR),M(MACRO_FLOAT),M(MACRO_NULL), + KC_TRNS,KC_TRNS,KC_TRNS,M(MACRO_VOID),M(MACRO_BOOL),M(MACRO_BREAK),KC_BSLASH, + KC_TRNS,KC_LGUI,KC_LALT,KC_TRNS,KC_TRNS, + KC_TRNS,LCTL(KC_X), + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_CALCULATOR, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, M(MACRO_TODO), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, + M(MACRO_NEW), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TILD, M(MACRO_PARENTHESE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_PGUP,KC_PGDOWN, KC_INSERT, KC_PSCREEN, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_LEFT, KC_RIGHT +), + + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(FKEYS) // FN1 - Momentary Layer 1 +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case MACRO_PUBLIC: + if (record->event.pressed) { + return MACRO( T(P), T(U), T(B), T(L), T(I), T(C), T(SPACE),END); + } + break; + case MACRO_PRIVATE: + if (record->event.pressed) { + return MACRO( T(P), T(R), T(I), T(V), T(A), T(T), T(E), T(SPACE),END); + } + break; + case MACRO_STATIC: + if (record->event.pressed) { + return MACRO( T(S), T(T), T(A), T(T), T(I), T(C), T(SPACE), END); + } + break; + case MACRO_CONST: + if (record->event.pressed) { + return MACRO( T(C), T(O), T(N), T(S), T(T), T(SPACE), END); + } + break; + case MACRO_VOID: + if (record->event.pressed) { + return MACRO( T(V), T(O), T(I), T(D), T(SPACE), END); + } + break; + case MACRO_VAR: + if (record->event.pressed) { + return MACRO( T(V), T(A), T(R), T(SPACE), END); + } + break; + case MACRO_STRING: + if (record->event.pressed) { + return MACRO( T(S), T(T), T(R), T(I), T(N), T(G), T(SPACE), END); + } + break; + case MACRO_BOOL: + if (record->event.pressed) { + return MACRO( T(B), T(O), T(O), T(L), T(SPACE), END); + } + break; + case MACRO_INT: + if (record->event.pressed) { + return MACRO( T(I), T(N), T(T), T(SPACE), END); + } + break; + case MACRO_FLOAT: + if (record->event.pressed) { + return MACRO( T(F), T(L), T(O), T(A),T(T),T(SPACE), END); + } + break; + case MACRO_RETURN: + if (record->event.pressed) { + return MACRO( T(R), T(E), T(T), T(U),T(R),T(N), END); + } + break; + case MACRO_NULL: + if (record->event.pressed) { + return MACRO( T(N), T(U), T(L), T(L), END); + } + case MACRO_BREAK: + if (record->event.pressed) { + return MACRO( T(B), T(R), T(E), T(A), T(K), T(SCOLON), END); + } + break; + case MACRO_TODO: + if (record->event.pressed) { + return MACRO( T(SLASH), T(SLASH), D(LSHIFT) ,T(T), T(O), T(D), T(O),U(LSHIFT), T(SPACE),END); + } + break; + case MACRO_NEW: + if (record->event.pressed) { + return MACRO( T(N), T(E), T(W), T(SPACE), END); + } + break; + case MACRO_PARENTHESE: + if (record->event.pressed) { + return MACRO( D(LSHIFT),T(9), T(0),U(LSHIFT), T(SCOLON), END); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/csharp_dev/readme.md b/keyboards/ergodox/keymaps/csharp_dev/readme.md new file mode 100644 index 000000000..96af077ad --- /dev/null +++ b/keyboards/ergodox/keymaps/csharp_dev/readme.md @@ -0,0 +1,47 @@ +# ErgoDox EZ C# Developer configuration + +## Changelog + +* Feb 12, 2016 (V1): + * First version commit +* Mar 20, 2016 (V2): + * Removed "Classic QWERTY" layer, inverted GUI and SHIFT on Hold for Space and Enter + +## About +This layout was conceived in an attempt to optimise keyboard layout for developers (C# more specifically, but it can work with most of other languages), and limit the keys required to perform the most frequent actions. + +I came to the realization that my main tool as a developer, the qwerty keyboard was something that did not evolved at its core in almost 150 years. +There are a lot of reasons to this, and it would be a massive entreprise to change a standard so strongly anchored, but I wanted to give it a try and see how would look an input device dedicated to developers, more specifically a C# developer in my case. +The biggest flaw in standard QWERTY keyboards was that I always needed to perform key combination to access commonly used characters or actions. Think about it a minute, how many times a day do you press a modifier key such as Ctrl or Shift, it's insane and could be so easily optimized to require only one key press. + +Then I came across the ErgoDox EZ project, that allowed a full customization of its firmware, and a unique 2 parts design. + + + +## Layout design principles +* No key combination required for the most common input characters ( (),[],{},<> ... ) +* No key combination required for the most common actions (copy/paste/undo/save) +* Regroup characters by usage ( + - * = ...) +* Easy access to the most commonly used characters: ; / " . , +* Preregistered macro for the most common C# langage instructions: public / private / string / int / float ... + +## Why is it specific to C Sharp +I defined the characters priority based on their usage in C# language, most of this characters are also used in other coding languages but it may require some tweaking. +For example there is no direct access to ~ or $ keys which can be very common in some languages. +Note it is also specific to Windows environement as the shortcut used in action keys would not work on Mac Os + +## In usage +It was relatively easy to get used to the layout, but it's hard for me to define how easy it was as I was getting used to a blank Ergodox keyboard at the same time. +Still it's extremely satisfying to Save your file with just one easily accessible key or to have one big key to end your code line ( ; ) + +## Improvements +This layout was shared after a bunch of iterations and only once I was happy with it. +Still there are many way to improve or iterate on this: +* Make it language agnostic +* Check and compile language's keyboard's heatmaps to statistically define keys priority (e.g. https://dzone.com/articles/most-pressed-keys-various ) +* QWERTY is still not the most efficient typing layout, I would like to create a Dvorak based similar layout in a near futur + +## Issues +One of the issues encountered while creating this layout was that I did not find a way to have a key to send a modifier on hold, and a key combination while pressed (e.g. I can't set a Key to do Save (Ctrl + S) when pressed and Shift modifier when hold ) + + diff --git a/keyboards/ergodox/keymaps/dave/keymap.c b/keyboards/ergodox/keymaps/dave/keymap.c new file mode 100644 index 000000000..32c70097b --- /dev/null +++ b/keyboards/ergodox/keymaps/dave/keymap.c @@ -0,0 +1,199 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define PROG 1 // programming +#define NAVI 2 // navigation + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | | 6 | 7 | 8 | 9 | 0 | - | BkSpce | + * |--------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | Y | | G | Y | U | I | O | P | Enter | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCtrl | A | S | D | F | G |------| |------| H | J | K | L | ; | Enter | + * |--------+------+------+------+------+------| H | | B |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |`/Ctrl| \ | | | LAlt | | RAlt | [ | ] | |'/Ctrl| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | PrtS | PrtS | | CtAl | CtAl | + * ,------+------+------| |------+------+------. + * | | | L1 | | L1 | | | + * | Spce | ~L2 +------| |------+ ~L1 | Spce | + * | | | LGui | | RGui | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_H, + CTL_T(KC_GRV),KC_NUBS,KC_NO, KC_NO, KC_LALT, + KC_PSCREEN, KC_PSCREEN, + TO(PROG, ON_PRESS), + KC_SPC, MO(NAVI), KC_LGUI, + // right hand + KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, + KC_G, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENTER, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENTER, + KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_RALT,KC_LBRC,KC_RBRC,KC_NO, CTL_T(KC_QUOT), + MT(0x5, KC_NO), MT(0x5, KC_NO), + TO(PROG, ON_PRESS), + KC_RGUI, MO(PROG), KC_SPC + ), + +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | K/ | K* | K- | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | ( | ) | | | | | | | K7 | K8 | K9 | K+ | # | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | { | } | ` |------| |------| | K4 | K5 | K6 | K+ | ' | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | | K1 | K2 | K3 | K= | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | K0 | K0 | K. | K= | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | L2 | | L2 | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// PROGRAMMING +[PROG] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, + KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, + KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + TO(NAVI, ON_PRESS), + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_NO, KC_PSLS, KC_PAST, KC_PMNS, KC_EQUAL, + KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_NUHS, + KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS, + KC_P0, KC_P0, KC_PDOT, KC_PENT, KC_TRNS, + KC_TRNS, KC_TRNS, + TO(NAVI, ON_PRESS), + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Navigation and system keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Home | Up | End | Ins | PgUp | | | | | | Ins | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Left | Down | Rght | Del | PgDn |------| |------| | Back | Del | Fwrd | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Lclk | MsUp | Rclk | | | | | | | Prev | Play | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | MsLt | MsDn | MsRt | | |VolDn | Mute |VolUp | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | L0 | | L0 | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// NAVIGATION +[NAVI] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_HOME, KC_UP, KC_END, KC_INS, KC_PGUP, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DELT, KC_PGDN, + KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, + TO(BASE, ON_PRESS), + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_WBAK, KC_DELT, KC_WFWD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + TO(BASE, ON_PRESS), + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + //[1] = ACTION_LAYER_TAP_TOGGLE(PROG), // FN1 - Momentary Layer 1 (Symbols) + //[2] = ACTION_LAYER_TAP_TOGGLE(NAVI) // FN2 - Momentary Layer 2 (Navigation) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + /* leds is a static array holding the current brightness of each of the + * three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and + * -1s in the code below, and because wasting a byte really doesn't matter + * that much (no, it *doesn't*, stop whinging!). Note that because it's + * static it'll maintain state across invocations of this routine. + */ + static uint8_t leds[4]; + uint8_t led; + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + + /* Loop over each LED/layer */ + for (led = 1; led <= 3; ++led) { + /* If the current layer matches the current LED, increment its + * brightness by 1 up to a maximum of 255. If the current layer doesn't + * match, decrement its brightness by 1 down to a minimum of zero. + */ + leds[led] += (layer == led) ? + (leds[led] < 255 ? 1 : 0): + (leds[led] > 0 ? -1 : 0); + /* Set LED state according to the new brightness */ + if (leds[led]) { + ergodox_right_led_on(led); + ergodox_right_led_set(led, leds[led]); + } + else { + ergodox_right_led_off(led); + } + } + + +}; diff --git a/keyboards/ergodox/keymaps/dave/readme.md b/keyboards/ergodox/keymaps/dave/readme.md new file mode 100644 index 000000000..aa0f9bd19 --- /dev/null +++ b/keyboards/ergodox/keymaps/dave/readme.md @@ -0,0 +1,38 @@ +This keymap is my preferred layout (after a certain amount of experimentation). +The rationale behind the design is as follows: + +I grew up typing from a very early age and thus never learned the "correct" way +to touch type (essentially, I'm self-taught). As a, result my fingers don't +tend to stay on the "home keys" and occasionally my right hand wants to type +keys that are on the left of the keyboard, and vice versa. + +Hence, despite liking the idea of split keyboards in principle, I've never been +able to get on with them because the split simply doesn't work with my style of +typing. The Ergodox solves this neatly by virtue of having a few extra keys in +the "middle" of the keyboard which I can utilise for deliberate redundancy. +Thus in this keymap there are two "6" keys (one on the left, one on the right) +and likewise Y, H, G, and B are all duplicated to enable one-handed patterns +that I use frequently (e.g. "byobu" with the right hand, "yes" with the left, +etc.). + +I occasionally use the numeric pad for data entry, thus this is duplicated +under the natural home position of the right hand in layer 1 (activated by +holding one of the right thumb buttons), while the cursor keys are duplicated +under the classic WASD gaming layout of the left hand in layer 2 (activated by +holding one of the left thumb buttons). Various other useful keys also appear +in these layers (brackets and symbols for coding in layer 1, navigation and +F-keys in layer 2, etc.). + +Finally, modifier keys like Ctrl, Shift, and Alt, along with Backspace and +Enter are all in traditional locations in an effort to reuse existing muscle +memory as much as possible (keys like =, #, and ' are in layer 1). The layout +maps are in the comments of keymap_dave.c so I won't bother duplicating them +here. + +Oh, and the LEDs are rather pimped ... because I could! + +Anyway, although I'm sure this keymap won't be to many people's taste you might +find some interesting ideas in here for your own layouts. Do tweet me +(@waveform80) if you have any questions / suggestions / bugs. + +Dave. diff --git a/keyboards/ergodox/keymaps/default/default.png b/keyboards/ergodox/keymaps/default/default.png Binary files differnew file mode 100644 index 000000000..6575f7b5e --- /dev/null +++ b/keyboards/ergodox/keymaps/default/default.png diff --git a/keyboards/ergodox/keymaps/default/default_highres.png b/keyboards/ergodox/keymaps/default/default_highres.png Binary files differnew file mode 100644 index 000000000..7d9f045f4 --- /dev/null +++ b/keyboards/ergodox/keymaps/default/default_highres.png diff --git a/keyboards/ergodox/keymaps/default/keymap.c b/keyboards/ergodox/keymaps/default/keymap.c new file mode 100644 index 000000000..f1a83f4e7 --- /dev/null +++ b/keyboards/ergodox/keymaps/default/keymap.c @@ -0,0 +1,182 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/default/readme.md b/keyboards/ergodox/keymaps/default/readme.md new file mode 100644 index 000000000..8f6dba45e --- /dev/null +++ b/keyboards/ergodox/keymaps/default/readme.md @@ -0,0 +1,10 @@ +# ErgoDox EZ Default Configuration + +## Changelog + +* Feb 2, 2016 (V1.1): + * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). + +This is what we ship with out of the factory. :) The image says it all: + + diff --git a/keyboards/ergodox/keymaps/default_osx/default_osx_highres.png b/keyboards/ergodox/keymaps/default_osx/default_osx_highres.png Binary files differnew file mode 100644 index 000000000..04f46bbd5 --- /dev/null +++ b/keyboards/ergodox/keymaps/default_osx/default_osx_highres.png diff --git a/keyboards/ergodox/keymaps/default_osx/keymap.c b/keyboards/ergodox/keymaps/default_osx/keymap.c new file mode 100644 index 000000000..e9a242e07 --- /dev/null +++ b/keyboards/ergodox/keymaps/default_osx/keymap.c @@ -0,0 +1,187 @@ +// Netable differences vs. the default firmware for the ErgoDox EZ: +// 1. The Cmd key is now on the right side, making Cmd+Space easier. +// 2. The media keys work on OSX (But not on Windows). +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2| LGui | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_LGUI, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/default_osx/readme.md b/keyboards/ergodox/keymaps/default_osx/readme.md new file mode 100644 index 000000000..aa749aac9 --- /dev/null +++ b/keyboards/ergodox/keymaps/default_osx/readme.md @@ -0,0 +1,8 @@ +# The OSX Friendly Version of the Default Firmware + +So, I took the default firmware and just made a couple of tweaks that make it easier to use with OS X: + +1. The Cmd key is now on the right side, making Cmd+Space easier. +2. The media keys work on OSX (But not on Windows). + + diff --git a/keyboards/ergodox/keymaps/dragon788/keymap.c b/keyboards/ergodox/keymaps/dragon788/keymap.c new file mode 100644 index 000000000..d33bc6a25 --- /dev/null +++ b/keyboards/ergodox/keymaps/dragon788/keymap.c @@ -0,0 +1,229 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define PLVR 3 // Plover layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LGui | |Plover| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L2 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Esc/Ctrl| A | S | D | F | G |------| |------| H | J | K | L | ; | '"/Ctrl| + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | ~L1 | Grv | '" | Left |Rgt/L2| | Up/L2| Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | Home | | PgUp |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | End | | PgDn | | | + * |Backsp|Delete|------| |------| Enter |Space | + * | ace | | LAlt | |TabCtl| | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_FN1, KC_GRV, KC_QUOT,KC_LEFT, LT(MDIA, KC_RGHT), + KC_APP, KC_HOME, + KC_END, + KC_BSPC,KC_DELT,KC_LALT, + // right hand + TG(3), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(2), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTL_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + LT(MDIA, KC_UP), KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_PGUP, CTL_T(KC_ESC), + KC_PGDN, + CTL_T(KC_TAB),KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | Calc | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_CALC, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | Rclk | Lclk | | | | | | Lclk | Rclk | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft| MsUp |MsDown|MsRght|------| |------|MsLeft|MsDown| MsUp |MsRght| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | Prev | |VolUp | | + * ,------|------|------| |------+------+------. + * | | | Play | | Mute |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Fwd |Back | + * | | | Next | |VolDn | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MPRV, + KC_MPLY, + KC_BTN1, KC_BTN2, KC_MNXT, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_TRNS, + KC_MUTE, + KC_VOLD, KC_WBAK, KC_WFWD +), + +/* Keymap 4: Steno for Plover from https://github.com/shayneholmes/tmk_keyboard/commit/11290f8489013018f778627db725160c745e75bd + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | q | w | e | r | t |------| |------| y | u | i | o | p | [ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | a | s | d | f | g | | | | h | j | k | l | ; | ' | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | c | v |------| |------| n | m | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[PLVR] = KEYMAP( // layout: layer 4: Steno for Plover + // left hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, + KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_FN4, KC_NO, + KC_NO, + KC_C, KC_V, KC_NO, + // right hand + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_NO, KC_N, KC_M +), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/dvorak/dvorak.png b/keyboards/ergodox/keymaps/dvorak/dvorak.png Binary files differnew file mode 100644 index 000000000..cb8316309 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak/dvorak.png diff --git a/keyboards/ergodox/keymaps/dvorak/keymap.c b/keyboards/ergodox/keymaps/dvorak/keymap.c new file mode 100644 index 000000000..d3609c673 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |------| D | H | T | N |S / L2| - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, + MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout0.png b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout0.png Binary files differnew file mode 100644 index 000000000..6a36f9bfa --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout0.png diff --git a/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout1.png b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout1.png Binary files differnew file mode 100644 index 000000000..c6e6d913c --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout1.png diff --git a/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout2.png b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout2.png Binary files differnew file mode 100644 index 000000000..23f56ff4c --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keyboard-layout2.png diff --git a/keyboards/ergodox/keymaps/dvorak_intl_squisher/keymap.c b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keymap.c new file mode 100644 index 000000000..89eae5208 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_intl_squisher/keymap.c @@ -0,0 +1,185 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | BrBck| | Play | 6 | 7 | 8 | 9 | 0 | \ / L2 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Esc | ' | , | . | P | Y | Del | | Ins | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |------| D | H | T | N | S | - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| LAlt | LGui | Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | App | L1 | | L2 |PrntScr | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space| Tab |------| |------| AltShf |Enter | + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_WBAK, + KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_DELT, + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_LALT, KC_LGUI, KC_LEFT,KC_RGHT, + CTL_T(KC_APP), TG(1), + KC_HOME, + KC_SPC,KC_TAB,KC_END, + // right hand + KC_MPLY, KC_6, KC_7, KC_8, KC_9, KC_0, LT(MDIA, KC_BSLS), + KC_INS, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + TG(2), KC_PSCREEN, + KC_PGUP, + KC_PGDN,RALT(KC_RSFT), KC_ENT + ), +/* Keymap 1: Symbol & Media Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Prev | Next | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | |VolUp | | | + * | | |------| |------| Mute | | + * | | | | |VolDn | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MNXT, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_VOLU, + KC_VOLD, KC_MUTE, KC_TRNS +), +/* Keymap 2: QWERTY Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | A | S | D | F | G |------| |------| H | J | K | L | ; | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( // layer 0 : default + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, + KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_TRNS, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, + KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_TRNS, + KC_TRNS, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/dvorak_intl_squisher/readme.md b/keyboards/ergodox/keymaps/dvorak_intl_squisher/readme.md new file mode 100644 index 000000000..984106ff4 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_intl_squisher/readme.md @@ -0,0 +1,29 @@ +# ErgoDox EZ Dvorak International Squisher + +Dvorak layout adjusted with several (linux) applications in mind: + +* Easier Escape for VIM +* Windows/Super key for awesome WM +* Alt+Shift for international characters +* PrintScreen for sys-rq +* Insert for the X11 clip-board + +Major layer changes: + +* Common multimedia keys are integrated into layer 0, less common into layer 1 +* No mouse keys +* Layer 2 is qwerty (for easier gaming & less fortunate keyboard users) + +Known issues: + +* Alt+Shift does not work reliably (depends on the X11 kb layout? Not + entirely clear...) + + + + + +## Changelog + +* 2016-03-29 + * Initial release diff --git a/keyboards/ergodox/keymaps/dvorak_spanish/keymap.c b/keyboards/ergodox/keymaps/dvorak_spanish/keymap.c new file mode 100755 index 000000000..6d7adf907 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_spanish/keymap.c @@ -0,0 +1,284 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +/****************************************************************************************** + * SPANISH DVORAK LAYOUT (see http://djelibeibi.unex.es/dvorak/) + * Layer 1: auxiliary keys + * Layer 2: full qwerty layout + ****************************************************************************************** + * IMPORTANT: Software layout must be set to SPANISH QWERTY to work properly + *****************************************************************************************/ + +// LAYERS +#define BASE 0 // dvorak layout (default) +#define AUX 1 // auxiliary keys +#define QWERTY 2 // qwerty layout + +// MACROS +#define OBRACE 0 // key { or shift +#define CBRACE 1 // key } or shift +#define OBRACK 2 // key [ or left alt +#define CBRACK 3 // key ] or left alt +#define CAPS 4 // caps lock + +// LEDS +#define USB_LED_NUM_LOCK 0 +#define USB_LED_CAPS_LOCK 1 +#define USB_LED_SCROLL_LOCK 2 +#define USB_LED_COMPOSE 3 +#define USB_LED_KANA 4 + +// TIMERS +#define KEY_TAP_FAST 85 +#define KEY_TAP_SLOW 95 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base layer + * Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | 1 | 2 | 3 | 4 | 5 | <> | | ¡ | 6 | 7 | 8 | 9 | 0 | ' | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | F1/~L1 | . | , | Ñ | P | Y |MEH_T | | L1 | F | G | C | H | L |ALL_T/+ | + * |--------+------+------+------+------+------| DEL | | ~L1 |------+------+------+------+------+--------| + * |Esc/Ctrl| A | O | E | U | I |------| |------| D | R | T | N | S |'/RCtrl | + * |--------+------+------+------+------+------| LGUI | | RALT |------+------+------+------+------+--------| + * | {/LSft | - | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |[/LALT| HOME |PGDOWN| PGUP | END | | LEFT | DOWN | UP |RIGHT |]/LALT| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |F5/CAG|F6/~L1| |F7/~L1|F8/CAG| + * ,------|------|------| |------+--------+------. + * | | |F4/CA | |F11/CA| | | + * | ENTER| TAB |------| |------| BSPC | SPACE| + * | | |F3/SA | |F12/SA| | | + * `--------------------' `----------------------' + * CAG = CTRL-ALT-GUI + * CA = CTRL-ALT + * SA = SHIFT-ALT + * + */ +[BASE] = KEYMAP( + // left hand + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NONUS_BSLASH, + LT(AUX, KC_F1), KC_DOT, KC_COMM,KC_SCLN,KC_P, KC_Y, MEH_T(KC_DEL), + CTL_T(KC_ESC), KC_A, KC_O, KC_E, KC_U, KC_I, + M(OBRACE), KC_SLSH,KC_Q, KC_J, KC_K, KC_X, KC_LGUI, + M(OBRACK), KC_HOME,KC_PGDN,KC_PGUP,KC_END, + LCAG_T(KC_F5), LT(AUX, KC_F6), + MT((MOD_LALT | MOD_LCTL), KC_F4), + KC_ENT,KC_TAB,MT((MOD_LALT | MOD_LSFT), KC_F3), + // right hand + KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, + KC_FN1, KC_F, KC_G, KC_C, KC_H, KC_L, ALL_T(KC_RBRACKET), + KC_D, KC_R, KC_T, KC_N, KC_S, CTL_T(KC_QUOTE), + KC_RALT, KC_B, KC_M, KC_W, KC_V, KC_Z, M(CBRACE), + KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,M(CBRACK), + LT(AUX, KC_F7), LCAG_T(KC_F8), + MT((MOD_LALT | MOD_LCTL), KC_F11), + MT((MOD_LALT | MOD_LSFT), KC_F12),KC_BSPC, KC_SPC + ), +/* Keymap 1: Aux layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | SLEEP | PWR | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | < | > | MsUp | | | | | ~L0 | | 7 | 8 | 9 | * | `^ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | 4 | 5 | 6 | + | Ç | + * |--------+------+------+------+------+------| | |PSCR |------+------+------+------+------+--------| + * |CAPSLOCK| | | | | | | | | | 1 | 2 | 3 | / | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |CTRL-S|CTRL-Z|CTRL-X|CTRL-C|CTRL-V| | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | Play | + * ,------|------|------| |------+------+------. + * | | | | | VolUp| | | + * | Lclk | Rclk |------| |------| Prev | Next | + * | | | L2 | | VolDn| | | + * `--------------------' `--------------------' + */ +[AUX] = KEYMAP( + // left hand + KC_NO , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_SLEP, + KC_TRNS, KC_NONUS_BSLASH, LSFT(KC_NONUS_BSLASH), KC_MS_U, KC_NO, KC_NO, KC_NO, + KC_NO , KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO , + M(CAPS), KC_NO, KC_NO , KC_NO , KC_NO , KC_NO , KC_NO, + LCTL(KC_S), LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), + KC_NO , KC_TRNS, + KC_NO, + KC_BTN1, KC_BTN2, TG(QWERTY), + // right hand + KC_PWR, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_NO, KC_7, KC_8, KC_9, KC_PAST, KC_LBRACKET, + KC_NO, KC_4, KC_5, KC_6, KC_PPLS, KC_BSLASH, + KC_PSCR, KC_NO, KC_1, KC_2, KC_3, KC_PSLS, KC_NO, + KC_NO ,KC_DOT, KC_0, KC_PEQL, KC_NO, + KC_TRNS, KC_MPLY, + KC_VOLU, + KC_VOLD, KC_MPRV, KC_MNXT +), +/* Keymap 2: QWERTY layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | 1 | 2 | 3 | 4 | 5 | <> | | ¡ | 6 | 7 | 8 | 9 | 0 | ' | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TRANS | Q | W | E | R | T |MEH_T | | TRANS| Y | U | I | O | P |ALL_T/+ | + * |--------+------+------+------+------+------| DEL | | |------+------+------+------+------+--------| + * |Esc/Ctrl| A | S | D | F | G |------| |------| H | J | K | L | Ñ |'/RCtrl | + * |--------+------+------+------+------+------| LGUI | | RALT |------+------+------+------+------+--------| + * | {/LSft | Z | X | C | V | B | | | | N | M | , | . | - | }/RSft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |[/LALT| HOME |PGDOWN| PGUP | END | | LEFT | DOWN | UP |RIGHT |]/LALT| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |F5/CAG| TRANS| | TRANS|F8/CAG| + * ,------|------|------| |------+--------+------. + * | | |F4/CA | |F11/CA| | | + * | ENTER| TAB |------| |------| BSPC | SPACE| + * | | | TRANS| |F12/SA| | | + * `--------------------' `----------------------' + * CAG = CTRL-ALT-GUI + * CA = CTRL-ALT + * SA = SHIFT-ALT + * + */ +[QWERTY] = KEYMAP( + // left hand + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NONUS_BSLASH, + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, MEH_T(KC_DEL), + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + M(OBRACE), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, + M(OBRACK), KC_HOME,KC_PGDN,KC_PGUP,KC_END, + LCAG_T(KC_F5), KC_TRNS, + MT((MOD_LALT | MOD_LCTL), KC_F4), + KC_ENT,KC_TAB,KC_TRNS, + // right hand + KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, + KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, ALL_T(KC_RBRACKET), + KC_H, KC_J, KC_K, KC_L, KC_SCLN,CTL_T(KC_QUOTE), + KC_RALT, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,M(CBRACE), + KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,M(CBRACK), + KC_TRNS, LCAG_T(KC_F8), + MT((MOD_LALT | MOD_LCTL), KC_F11), + MT((MOD_LALT | MOD_LSFT), KC_F12),KC_BSPC, KC_SPC +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(AUX) // FN1 - Momentary Layer 1 (Aux) +}; + +static uint16_t key_timer; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case OBRACE: { + if (record->event.pressed) { + key_timer = timer_read(); + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + if (timer_elapsed(key_timer) < KEY_TAP_SLOW) { + register_code(KC_RALT); + register_code(KC_QUOTE); + unregister_code(KC_QUOTE); + unregister_code(KC_RALT); + } + } + break; + } + case CBRACE: { + if (record->event.pressed) { + key_timer = timer_read(); + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + if (timer_elapsed(key_timer) < KEY_TAP_SLOW) { + register_code(KC_RALT); + register_code(KC_BSLS); + unregister_code(KC_BSLS); + unregister_code(KC_RALT); + } + } + break; + } + case OBRACK: { + if (record->event.pressed) { + key_timer = timer_read(); + register_code(KC_LALT); + } else { + unregister_code(KC_LALT); + if (timer_elapsed(key_timer) < KEY_TAP_SLOW) { + register_code(KC_RALT); + register_code(KC_LBRACKET); + unregister_code(KC_LBRACKET); + unregister_code(KC_RALT); + } + } + break; + } + case CBRACK: { + if (record->event.pressed) { + key_timer = timer_read(); + register_code(KC_LALT); + } else { + unregister_code(KC_LALT); + if (timer_elapsed(key_timer) < KEY_TAP_SLOW) { + register_code(KC_RALT); + register_code(KC_RBRACKET); + unregister_code(KC_RBRACKET); + unregister_code(KC_RALT); + } + } + break; + } + case CAPS: { + if (record->event.pressed) { + register_code(KC_CAPSLOCK); + } else { + unregister_code(KC_CAPSLOCK); + } + break; + } + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + + // Turn the caps lock led on + if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + ergodox_right_led_1_on(); + } + +} + diff --git a/keyboards/ergodox/keymaps/dvorak_spanish/readme.md b/keyboards/ergodox/keymaps/dvorak_spanish/readme.md new file mode 100644 index 000000000..e075e3cd7 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_spanish/readme.md @@ -0,0 +1,99 @@ +# Ergodox Spanish Dvorak Layout + * See spanish dvorak layout [here](http://djelibeibi.unex.es/dvorak/) + * Software layout must be set to SPANISH QWERTY to work properly + +## Keymap Layers + - L0: spanish dvorak with some customizations (see layout below) + - L1: auxiliary keys (includes qwerty shortcuts, numpad...) + - L2: qwerty layout with customizations + + +### Keymap 0: Base layer +Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively + +<pre><code> + +,--------------------------------------------------. ,--------------------------------------------------. +| \ | 1 | 2 | 3 | 4 | 5 | <> | | ¡ | 6 | 7 | 8 | 9 | 0 | ' | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| F1/~L1 | . | , | Ñ | P | Y |MEH_T | | L1 | F | G | C | H | L |ALL_T/+ | +|--------+------+------+------+------+------| DEL | | ~L1 |------+------+------+------+------+--------| +|Esc/Ctrl| A | O | E | U | I |------| |------| D | R | T | N | S |'/RCtrl | +|--------+------+------+------+------+------| LGUI | | RALT |------+------+------+------+------+--------| +| {/LSft | - | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | +'--------+------+------+------+------+-------------' '-------------+------+------+------+------+--------' + |[/LALT| HOME |PGDOWN| PGUP | END | | LEFT | DOWN | UP |RIGHT |]/LALT| + '----------------------------------' '----------------------------------' + ,-------------. ,-------------. + |F5/CAG|F6/~L1| |F7/~L1|F8/CAG| + ,------|------|------| |------+--------+------. + | | |F4/CA | |F11/CA| | | + | ENTER| TAB |------| |------| BSPC | SPACE| + | | |F3/SA | |F12/SA| | | + '--------------------' '----------------------' + CAG = CTRL-ALT-GUI + CA = CTRL-ALT + SA = SHIFT-ALT + +</pre></code> + +### Keymap 1: Aux layer + +<pre><code> + +,--------------------------------------------------. ,--------------------------------------------------. +| | F1 | F2 | F3 | F4 | F5 | SLEEP| | PWR | F6 | F7 | F8 | F9 | F10 | F11 | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| | < | > | MsUp | | | | | ~L0 | | 7 | 8 | 9 | * | '^ | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | |MsLeft|MsDown|MsRght| |------| |------| | 4 | 5 | 6 | + | Ç | +|--------+------+------+------+------+------| | |PSCR |------+------+------+------+------+--------| +|CAPSLOCK| | | | | | | | | | 1 | 2 | 3 | / | | +'--------+------+------+------+------+-------------' '-------------+------+------+------+------+--------' + |CTRL-S|CTRL-Z|CTRL-X|CTRL-C|CTRL-V| | | . | 0 | = | | + '----------------------------------' '----------------------------------' + ,-------------. ,-------------. + | | | | | Play | + ,------|------|------| |------+------+------. + | | | | | VolUp| | | + | Lclk | Rclk |------| |------| Prev | Next | + | | | L2 | | VolDn| | | + '--------------------' '--------------------' + +</pre></code> + +### Keymap 2: QWERTY layer + +<pre><code> + +,--------------------------------------------------. ,--------------------------------------------------. +| \ | 1 | 2 | 3 | 4 | 5 | <> | | ¡ | 6 | 7 | 8 | 9 | 0 | ' | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| TRANS | Q | W | E | R | T |MEH_T | | TRANS| Y | U | I | O | P |ALL_T/+ | +|--------+------+------+------+------+------| DEL | | |------+------+------+------+------+--------| +|Esc/Ctrl| A | S | D | F | G |------| |------| H | J | K | L | Ñ |'/RCtrl | +|--------+------+------+------+------+------| LGUI | | RALT |------+------+------+------+------+--------| +| {/LSft | Z | X | C | V | B | | | | N | M | , | . | - | }/RSft | +'--------+------+------+------+------+-------------' '-------------+------+------+------+------+--------' + |[/LALT| HOME |PGDOWN| PGUP | END | | LEFT | DOWN | UP |RIGHT |]/LALT| + '----------------------------------' '----------------------------------' + ,-------------. ,-------------. + |F5/CAG| TRANS| | TRANS|F8/CAG| + ,------|------|------| |------+--------+------. + | | |F4/CA | |F11/CA| | | + | ENTER| TAB |------| |------| BSPC | SPACE| + | | | TRANS| |F12/SA| | | + '--------------------' '----------------------' + CAG = CTRL-ALT-GUI + CA = CTRL-ALT + SA = SHIFT-ALT + +</pre></code> + + +## Generation of .hex file +> [Download scripts from here](https://github.com/johgh/keyboard/tree/master/ergodox) + +> Execute install.sh and generate.sh scripts. + +> Flash with `teensy_loader` binary (should be installed from previous step) diff --git a/keyboards/ergodox/keymaps/emacs_osx_dk/default_highres.png b/keyboards/ergodox/keymaps/emacs_osx_dk/default_highres.png Binary files differnew file mode 100644 index 000000000..1d2583740 --- /dev/null +++ b/keyboards/ergodox/keymaps/emacs_osx_dk/default_highres.png diff --git a/keyboards/ergodox/keymaps/emacs_osx_dk/keymap.c b/keyboards/ergodox/keymaps/emacs_osx_dk/keymap.c new file mode 100644 index 000000000..e80f08d73 --- /dev/null +++ b/keyboards/ergodox/keymaps/emacs_osx_dk/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Grv | 1 | 2 | 3 | 4 | 5 | L1 | | L2 | 6 | 7 | 8 | 9 | 0 | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | - | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | \/LCtrl| A | S | D | F | G |------| |------| H | J | K | L | ; |'/RCtrl | + * |--------+------+------+------+------+------| RAlt | | RAlt |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | ~L1 | LCtrl| Left| Right| LAlt | | LAlt | Up | Down | RCtrl| ~L2 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Del | Ins | | Esc | App | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| LGui |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, TG(SYMB), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, + CTL_T(KC_BSLS), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_RALT, + MO(SYMB), KC_LCTRL, KC_LEFT,KC_RGHT,KC_LALT, + KC_DELT,KC_INS, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + TG(MDIA), KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTL_T(KC_QUOT), + KC_RALT, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_LALT,KC_UP, KC_DOWN,KC_RCTRL, MO(MDIA), + KC_ESC, KC_APP, + KC_PGUP, + KC_PGDN, KC_LGUI, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | 0 | . | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_0, KC_0, KC_DOT, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/emacs_osx_dk/readme.md b/keyboards/ergodox/keymaps/emacs_osx_dk/readme.md new file mode 100644 index 000000000..4839988d9 --- /dev/null +++ b/keyboards/ergodox/keymaps/emacs_osx_dk/readme.md @@ -0,0 +1,10 @@ +# ErgoDox EZ Emacs-OSX-DeadKeys Configuration + +Since I'm an Emacs user, ctrl keys are very important and gets a placement where the usual caps_lock is. There +are an extra pair of ctrls, just in case there where problems with the holding one's, but not as comfortable. + +Gui button takes a predominant place on the thumb cluster, as I'm using a mac os x and it relies heavily on it. + +Finally there is also two Right Alts to easily access to accented letters of the spanish alphabet. + + diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile new file mode 100644 index 000000000..b673c5ce5 --- /dev/null +++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile @@ -0,0 +1,9 @@ +# Having a file like this allows you to override Makefile definitions +# for your own particular keymap + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/erez_experimental/config.h b/keyboards/ergodox/keymaps/erez_experimental/config.h new file mode 100644 index 000000000..e5d7fe188 --- /dev/null +++ b/keyboards/ergodox/keymaps/erez_experimental/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 300 + +#undef LEADER_TIMEOUT +#define LEADER_TIMEOUT 300 + +#endif diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c new file mode 100644 index 000000000..47e40aa55 --- /dev/null +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -0,0 +1,199 @@ +#include <keymap_extras/keymap_colemak.h> +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | Alt/J| K | L |; / L2| LGui/' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * |LShift/(|Z/Ctrl| X | C | V | B | [ | | ] | N | M | , | . |//Ctrl|RShift/)| + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | -/L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Leader|------| |------| Tab/L1 |Enter | + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSPO, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_LBRC), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_LEAD,KC_END, + // right hand + KC_RGHT, KC_6,KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y,KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H,ALT_T(KC_J),KC_K, KC_L, LT(MDIA,KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_RBRC),KC_N,KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSPC, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, LT(SYMB,KC_MINS), + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,LT(SYMB, KC_TAB), KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 1 | 2 | 3 | 4 | 5 |------| |------| & | _ | - | ; | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 6 | 7 | 8 | 9 | 0 | | | | | | @ | = | % | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | |NxtTab|PrvTab| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS,LCTL(KC_PGUP), LCTL(KC_PGDN), + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, + KC_AMPR, KC_UNDS, KC_MINS, CM_SCLN, KC_PLUS, KC_TRNS, + KC_TRNS, KC_PIPE, KC_AT, KC_EQL, KC_PERC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | PgUp | Home | End | PgDn | |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_PGUP, KC_HOME, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_MACRO_TAP(0), // Eric Tang's Famous Macro! + [3] = ACTION_MACRO_TAP(1) // Eric Tang's Famous Macro! +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +LEADER_EXTERNS(); + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_ONE_KEY(KC_W) { + register_code(KC_LALT); + register_code(KC_F4); + unregister_code(KC_F4); + unregister_code(KC_LALT); + } + SEQ_ONE_KEY(KC_O) { + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(KC_O); + unregister_code(KC_O); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); + } + } +} + diff --git a/keyboards/ergodox/keymaps/erez_experimental/readme.md b/keyboards/ergodox/keymaps/erez_experimental/readme.md new file mode 100644 index 000000000..66acfa187 --- /dev/null +++ b/keyboards/ergodox/keymaps/erez_experimental/readme.md @@ -0,0 +1,51 @@ +# Erez's experimental layout + +This is my personal layout which I use to test out ideas which may or may not make it onto the default layout we ship with. It's based off the default layout, with various tweaks. + +Changelog: + +## May 24, 2016: + +* Implements Leader key example + * Leader, W sends Alt-F4 + * Leader, O sends Ctrl-shift-o (a shortcut I use in FrontApp) + +## May 8, 2016: + +* Makes bottom-right key send minus/underscore when tapped, L1 temporary toggle when held +* Tweaked the positions of the numbers on the symbol layer. Basically, 12345 are now directly under their number-row counterparts in layer 0. You can imagine pulling the number row down to the home row. And 67890 are directly under 12345 - so it's a matter of just adding 5 and going to the next row (1+5 = 6, 2+5 = 7 and so on). +* Tweaks media/nav layer + * Removes mouse control, as I don't use it + * Makes left home row keys PgUp, Home, End, PgDn + +## Apr 29, 2016: + +* Tweaks the Hyper and Meh key to send brackets when tapped +* Turns bottom-right key into a minus/underscore (easy to reach with the right pinky) + +## Apr 25, 2016: + +* Made it so that the right and left Shift keys send opening and closing parens ( ) when tapped + +## Feb 11, 2016: + +* Updated ASCII legend for thumb clusters +* Made it so outer left-hand thumb key is L1 momentary toggle +* Added % and @ to L1 +* Swapped positions for _ and - on L1 + +## Feb 5, 2016: + +* A whole new design for the symbol layer. Specifically: + * Put the minus, underscore, and semicolon right in the homerow for the right hand + * Parens are in better places for me + * The arrow keys now send Ctrl-PgUp and Ctrl-PgDn, for switching browser tabs with the arrows when in symbol layer + * Tab (right-hand outer thumb key) now does double duty to toggle symbol layer when held down + * Backspace (left-hand outer thumb key) now just toggles symbol layer (I wasn't using it as a backspace) + + +## Jan 19, 2016: + +* Made J into dual-action key (Alt when held down), to make Alt-tab more ergonomic. +* Made ' into dual-action key (Win/Cmd when held down). + diff --git a/keyboards/ergodox/keymaps/german-kinergo/keymap.c b/keyboards/ergodox/keymaps/german-kinergo/keymap.c new file mode 100644 index 000000000..971318d87 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-kinergo/keymap.c @@ -0,0 +1,210 @@ +// German keymap derived from "german", but more closely resembling the German layout of the Kinesis Ergo Elan. +// +// chschmitz, 2016-01-27 +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german.h" + +// Layer names +#define BASE 0 // default layer +#define SYMB 1 // symbol layer +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * X'es mark the spots where this is different from the "german" layout which it is based on. + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |X Esc X| 1 | 2 | 3 | 4 | 5 |X ` X| |XPRSCX| 6 | 7 | 8 | 9 | 0 | ß | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * |X Tab X| Q | W | E | R | T |X L1 X| |X L1 X| Z | U | I | O | P | Ü | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä/L2 | + * |--------+------+------+------+------+------|X L2 X| |X L2 X|------+------+------+------+------+--------| + * | LShift | Y | X | C | V | B | | | | N | M | , | . |X - X| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |XLGuiX|X ^ X|X < X|XLEFTX|XRIGHT| |XDownX|X Up X|X # X|X + X|XRGuiX| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |XCTRLX|XALTX | | Alt |Ctrl/Esc| + * ,------+------+------| |------+--------+------. + * |XXX |XXX | Home | | PgUp |XXX |XXX | + * | Bkspc|Del |------| |------| Enter | Space| + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, DE_ACUT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(1), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, MO(2), + KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT, + KC_LCTRL, KC_LALT, + KC_HOME, + KC_BSPC,KC_DELT,KC_END, + // right hand + KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + MO(1), DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, + KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE), + MO(2), KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, + KC_DOWN, KC_UP, DE_HASH, DE_PLUS, KC_RGUI, + KC_RALT, KC_RCTRL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), +// [BASE] = KEYMAP( // layer 0 : default +// // left hand +// KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, +// KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), +// KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, +// KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), +// LT(SYMB,DE_LESS),CTL_T(DE_HASH), DE_ACUT, DE_MINS, DE_PLUS, +// ALT_T(KC_APP), KC_LGUI, +// KC_HOME, +// KC_SPC,KC_BSPC,KC_END, +// // right hand +// KC_MNXT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, +// TG(2), DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, +// KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE), +// MEH_T(KC_NO),KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(DE_MINS), KC_RSFT, +// KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_FN1, +// KC_LALT,CTL_T(KC_ESC), +// KC_PGUP, +// KC_PGDN,KC_TAB, KC_ENT +// ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,DE_EXLM,DE_AT, DE_LCBR,DE_RCBR,DE_PIPE,KC_TRNS, + KC_TRNS,DE_HASH,DE_DLR, DE_LPRN,DE_RPRN,DE_GRV, + KC_TRNS,DE_PERC,DE_CIRC,DE_LBRC,DE_RBRC,DE_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, DE_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, DE_PLUS, KC_TRNS, + KC_TRNS, DE_AMPR, KC_1, KC_2, KC_3, DE_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, DE_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | |MsAcl0|MsAcl1|MsAcl2| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Back |Forwd | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11, + KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12, + KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case MDIA: + ergodox_right_led_2_on(); + break; + default: + ergodox_board_led_off(); + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/german-kinergo/layout-code.png b/keyboards/ergodox/keymaps/german-kinergo/layout-code.png Binary files differnew file mode 100644 index 000000000..a0ef551e1 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-kinergo/layout-code.png diff --git a/keyboards/ergodox/keymaps/german-kinergo/layout-media.png b/keyboards/ergodox/keymaps/german-kinergo/layout-media.png Binary files differnew file mode 100644 index 000000000..56aea1dca --- /dev/null +++ b/keyboards/ergodox/keymaps/german-kinergo/layout-media.png diff --git a/keyboards/ergodox/keymaps/german-kinergo/layout.png b/keyboards/ergodox/keymaps/german-kinergo/layout.png Binary files differnew file mode 100644 index 000000000..76a1aa5d7 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-kinergo/layout.png diff --git a/keyboards/ergodox/keymaps/german-kinergo/readme.md b/keyboards/ergodox/keymaps/german-kinergo/readme.md new file mode 100644 index 000000000..557d85a8a --- /dev/null +++ b/keyboards/ergodox/keymaps/german-kinergo/readme.md @@ -0,0 +1,35 @@ +# German Layout for the ErgoDox + +This layout is inspired by the "kinesis-qwerty-mod" from benblazak's +[ergodox-firmware](https://github.com/benblazak/ergodox-firmware), as well as by the "german" layout from the +[qmk_firmware](https://github.com/jackhumbert/qmk_firmware). +The goal was to have a layout that is pretty close to an ordinary German +keyboard, so I don't have to make adjustments on the operating system level +and I keep some of the muscle memory to use a regular keyboard. + +Modifications I made with regard to the aforementioned layouts: + +* The key layout is pretty close to the layout of a German Kinesis Ergo Elan. + The only exception I made is that I reversed the "up" and "down" cursor keys, + since that feels more natural to me. + +* All layer changes are "momentary", i.e. they only last as long as the respective key is pressed. + +* I sacrificed the Hyper and Meh keys, which I don't use, and put layer change keys in their place. + +* I added a PrintScreen key which I use quite regularly for screenshots. + +## Default Layer + + + +## Code Layer + + + +## Media Layer + + + +Christoph Schmitz <schm4704 at web dot de> +2016-01-28 diff --git a/keyboards/ergodox/keymaps/german-manuneo/compile_keymap.py b/keyboards/ergodox/keymaps/german-manuneo/compile_keymap.py new file mode 100644 index 000000000..7076a6ecb --- /dev/null +++ b/keyboards/ergodox/keymaps/german-manuneo/compile_keymap.py @@ -0,0 +1,710 @@ +#!/usr/bin/env python +# -*- coding: utf-8 -*- +"""Compiler for keymap.c files + +This scrip will generate a keymap.c file from a simple +markdown file with a specific layout. + +Usage: + python compile_keymap.py INPUT_PATH [OUTPUT_PATH] +""" +from __future__ import division +from __future__ import print_function +from __future__ import absolute_import +from __future__ import unicode_literals + +import os +import io +import re +import sys +import json +import unicodedata +import collections +import itertools as it + +PY2 = sys.version_info.major == 2 + +if PY2: + chr = unichr + + +KEYBOARD_LAYOUTS = { + # These map positions in the parsed layout to + # positions in the KEYMAP MATRIX + 'ergodox_ez': [ + [ 0, 1, 2, 3, 4, 5, 6], [38, 39, 40, 41, 42, 43, 44], + [ 7, 8, 9, 10, 11, 12, 13], [45, 46, 47, 48, 49, 50, 51], + [14, 15, 16, 17, 18, 19 ], [ 52, 53, 54, 55, 56, 57], + [20, 21, 22, 23, 24, 25, 26], [58, 59, 60, 61, 62, 63, 64], + [27, 28, 29, 30, 31 ], [ 65, 66, 67, 68, 69], + [ 32, 33], [70, 71 ], + [ 34], [72 ], + [ 35, 36, 37], [73, 74, 75 ], + ] +} + +ROW_INDENTS = { + 'ergodox_ez': [0, 0, 0, 0, 0, 1, 0, 0, 0, 2, 5, 0, 6, 0, 4, 0] +} + +BLANK_LAYOUTS = [ +# Compact Layout +""" +.------------------------------------.------------------------------------. +| | | | | | | | | | | | | | | +!-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! +| | | | | | | | | | | | | | | +!-----+----+----+----x----x----! ! !----x----x----+----+----+-----! +| | | | | | |-----!-----! | | | | | | +!-----+----+----+----x----x----! ! !----x----x----+----+----+-----! +| | | | | | | | | | | | | | | +'-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' +""", + +# Wide Layout +""" +.---------------------------------------------. .---------------------------------------------. +| | | | | | | | ! | | | | | | | +!-------+-----+-----+-----+-----+-------------! !-------+-----+-----+-----+-----+-----+-------! +| | | | | | | | ! | | | | | | | +!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------! +| | | | | | |-------! !-------! | | | | | | +!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------! +| | | | | | | | ! | | | | | | | +'-------+-----+-----+-----+-----+-------------' '-------------+-----+-----+-----+-----+-------' + | | | | | | ! | | | | | + '------------------------------' '------------------------------' + .---------------. .---------------. + | | | ! | | + .-------+-------+-------! !-------+-------+-------. + ! ! | | ! | ! ! + ! ! !-------! !-------! ! ! + | | | | ! | | | + '-----------------------' '-----------------------' +""", +] + + +DEFAULT_CONFIG = { + "keymaps_includes": [ + "keymap_common.h", + ], + 'filler': "-+.'!:x", + 'separator': "|", + 'default_key_prefix': ["KC_"], +} + + +SECTIONS = [ + 'layout_config', + 'layers', +] + + +# Markdown Parsing + +ONELINE_COMMENT_RE = re.compile(r""" + ^ # comment must be at the start of the line + \s* # arbitrary whitespace + // # start of the comment + (.*) # the comment + $ # until the end of line +""", re.MULTILINE | re.VERBOSE +) + +INLINE_COMMENT_RE = re.compile(r""" + ([\,\"\[\]\{\}\d]) # anythig that might end a expression + \s+ # comment must be preceded by whitespace + // # start of the comment + \s # and succeded by whitespace + (?:[^\"\]\}\{\[]*) # the comment (except things which might be json) + $ # until the end of line +""", re.MULTILINE | re.VERBOSE) + +TRAILING_COMMA_RE = re.compile(r""" + , # the comma + (?:\s*) # arbitrary whitespace + $ # only works if the trailing comma is followed by newline + (\s*) # arbitrary whitespace + ([\]\}]) # end of an array or object +""", re.MULTILINE | re.VERBOSE) + + +def loads(raw_data): + if isinstance(raw_data, bytes): + raw_data = raw_data.decode('utf-8') + + raw_data = ONELINE_COMMENT_RE.sub(r"", raw_data) + raw_data = INLINE_COMMENT_RE.sub(r"\1", raw_data) + raw_data = TRAILING_COMMA_RE.sub(r"\1\2", raw_data) + return json.loads(raw_data) + + +def parse_config(path): + def reset_section(): + section.update({ + 'name': section.get('name', ""), + 'sub_name': "", + 'start_line': -1, + 'end_line': -1, + 'code_lines': [], + }) + + def start_section(line_index, line): + end_section() + if line.startswith("# "): + name = line[2:] + elif line.startswith("## "): + name = line[3:] + else: + name = "" + + name = name.strip().replace(" ", "_").lower() + if name in SECTIONS: + section['name'] = name + else: + section['sub_name'] = name + section['start_line'] = line_index + + def end_section(): + if section['start_line'] >= 0: + if section['name'] == 'layout_config': + config.update(loads("\n".join( + section['code_lines'] + ))) + elif section['sub_name'].startswith('layer'): + layer_name = section['sub_name'] + config['layer_lines'][layer_name] = section['code_lines'] + + reset_section() + + def amend_section(line_index, line): + section['end_line'] = line_index + section['code_lines'].append(line) + + config = DEFAULT_CONFIG.copy() + config.update({ + 'layer_lines': collections.OrderedDict(), + 'macro_ids': {'UM'}, + 'unicode_macros': {}, + }) + + section = {} + reset_section() + + with io.open(path, encoding="utf-8") as fh: + for i, line in enumerate(fh): + if line.startswith("#"): + start_section(i, line) + elif line.startswith(" "): + amend_section(i, line[4:]) + else: + # TODO: maybe parse description + pass + + end_section() + assert 'layout' in config + return config + +# header file parsing + +IF0_RE = re.compile(r""" + ^ + #if 0 + $.*? + #endif +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +COMMENT_RE = re.compile(r""" + /\* + .*? + \*/" +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +def read_header_file(path): + with io.open(path, encoding="utf-8") as fh: + data = fh.read() + data, _ = COMMENT_RE.subn("", data) + data, _ = IF0_RE.subn("", data) + return data + + +def regex_partial(re_str_fmt, flags): + def partial(*args, **kwargs): + re_str = re_str_fmt.format(*args, **kwargs) + return re.compile(re_str, flags) + return partial + + +KEYDEF_REP = regex_partial(r""" + #define + \s + ( + (?:{}) # the prefixes + (?:\w+) # the key name + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +ENUM_RE = re.compile(r""" + ( + enum + \s\w+\s + \{ + .*? # the enum content + \} + ; + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +ENUM_KEY_REP = regex_partial(r""" + ( + {} # the prefixes + \w+ # the key name + ) # capture group end +""", re.MULTILINE | re.DOTALL | re.VERBOSE) + + +def parse_keydefs(config, data): + prefix_options = "|".join(config['key_prefixes']) + keydef_re = KEYDEF_REP(prefix_options) + enum_key_re = ENUM_KEY_REP(prefix_options) + for match in keydef_re.finditer(data): + yield match.groups()[0] + + for enum_match in ENUM_RE.finditer(data): + enum = enum_match.groups()[0] + for key_match in enum_key_re.finditer(enum): + yield key_match.groups()[0] + + +def parse_valid_keys(config, out_path): + basepath = os.path.abspath(os.path.join(os.path.dirname(out_path))) + dirpaths = [] + subpaths = [] + while len(subpaths) < 6: + path = os.path.join(basepath, *subpaths) + dirpaths.append(path) + dirpaths.append(os.path.join(path, "tmk_core", "common")) + dirpaths.append(os.path.join(path, "quantum")) + subpaths.append('..') + + includes = set(config['keymaps_includes']) + includes.add("keycode.h") + + valid_keycodes = set() + for dirpath, include in it.product(dirpaths, includes): + include_path = os.path.join(dirpath, include) + if os.path.exists(include_path): + header_data = read_header_file(include_path) + valid_keycodes.update( + parse_keydefs(config, header_data) + ) + return valid_keycodes + + +# Keymap Parsing + +def iter_raw_codes(layer_lines, filler, separator): + filler_re = re.compile("[" + filler + " ]") + for line in layer_lines: + line, _ = filler_re.subn("", line.strip()) + if not line: + continue + codes = line.split(separator) + for code in codes[1:-1]: + yield code + + +def iter_indexed_codes(raw_codes, key_indexes): + key_rows = {} + key_indexes_flat = [] + + for row_index, key_indexes in enumerate(key_indexes): + for key_index in key_indexes: + key_rows[key_index] = row_index + key_indexes_flat.extend(key_indexes) + assert len(raw_codes) == len(key_indexes_flat) + for raw_code, key_index in zip(raw_codes, key_indexes_flat): + # we keep track of the row mostly for layout purposes + yield raw_code, key_index, key_rows[key_index] + + +LAYER_CHANGE_RE = re.compile(r""" + (DF|TG|MO)\(\d+\) +""", re.VERBOSE) + + +MACRO_RE = re.compile(r""" + M\(\w+\) +""", re.VERBOSE) + + +UNICODE_RE = re.compile(r""" + U[0-9A-F]{4} +""", re.VERBOSE) + + +NON_CODE = re.compile(r""" + ^[^A-Z0-9_]$ +""", re.VERBOSE) + + +def parse_uni_code(raw_code): + macro_id = "UC_" + ( + unicodedata.name(raw_code) + .replace(" ", "_") + .replace("-", "_") + ) + code = "M({})".format(macro_id) + uc_hex = "{:04X}".format(ord(raw_code)) + return code, macro_id, uc_hex + + +def parse_key_code(raw_code, key_prefixes, valid_keycodes): + if raw_code in valid_keycodes: + return raw_code + + for prefix in key_prefixes: + code = prefix + raw_code + if code in valid_keycodes: + return code + + +def parse_code(raw_code, key_prefixes, valid_keycodes): + if not raw_code: + return 'KC_TRNS', None, None + + if LAYER_CHANGE_RE.match(raw_code): + return raw_code, None, None + + if MACRO_RE.match(raw_code): + macro_id = raw_code[2:-1] + return raw_code, macro_id, None + + if UNICODE_RE.match(raw_code): + hex_code = raw_code[1:] + return parse_uni_code(chr(int(hex_code, 16))) + + if NON_CODE.match(raw_code): + return parse_uni_code(raw_code) + + code = parse_key_code(raw_code, key_prefixes, valid_keycodes) + return code, None, None + + +def parse_keymap(config, key_indexes, layer_lines, valid_keycodes): + keymap = {} + raw_codes = list(iter_raw_codes( + layer_lines, config['filler'], config['separator'] + )) + indexed_codes = iter_indexed_codes(raw_codes, key_indexes) + key_prefixes = config['key_prefixes'] + for raw_code, key_index, row_index in indexed_codes: + code, macro_id, uc_hex = parse_code( + raw_code, key_prefixes, valid_keycodes + ) + # TODO: line numbers for invalid codes + err_msg = "Could not parse key '{}' on row {}".format( + raw_code, row_index + ) + assert code is not None, err_msg + # print(repr(raw_code), repr(code), macro_id, uc_hex) + if macro_id: + config['macro_ids'].add(macro_id) + if uc_hex: + config['unicode_macros'][macro_id] = uc_hex + keymap[key_index] = (code, row_index) + return keymap + + +def parse_keymaps(config, valid_keycodes): + keymaps = collections.OrderedDict() + key_indexes = config.get( + 'key_indexes', KEYBOARD_LAYOUTS[config['layout']] + ) + # TODO: maybe validate key_indexes + + for layer_name, layer_lines, in config['layer_lines'].items(): + keymaps[layer_name] = parse_keymap( + config, key_indexes, layer_lines, valid_keycodes + ) + return keymaps + +# keymap.c output + +USERCODE = """ +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case L1: + ergodox_right_led_1_on(); + break; + case L2: + ergodox_right_led_2_on(); + break; + case L3: + ergodox_right_led_3_on(); + break; + case L4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case L5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + // case L6: + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + // case L7: + // ergodox_right_led_1_on(); + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + default: + ergodox_board_led_off(); + break; + } +}; +""" + +MACROCODE = """ +#define UC_MODE_WIN 0 +#define UC_MODE_LINUX 1 +#define UC_MODE_OSX 2 + +// TODO: allow default mode to be configured +static uint16_t unicode_mode = UC_MODE_WIN; + +uint16_t hextokeycode(uint8_t hex) {{ + if (hex == 0x0) {{ + return KC_P0; + }} + if (hex < 0xA) {{ + return KC_P1 + (hex - 0x1); + }} + return KC_A + (hex - 0xA); +}} + +void unicode_action_function(uint16_t hi, uint16_t lo) {{ + switch (unicode_mode) {{ + case UC_MODE_WIN: + register_code(KC_LALT); + + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LALT); + break; + case UC_MODE_LINUX: + register_code(KC_LCTL); + register_code(KC_LSFT); + + register_code(KC_U); + unregister_code(KC_U); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LCTL); + unregister_code(KC_LSFT); + break; + case UC_MODE_OSX: + break; + }} +}} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {{ + if (!record->event.pressed) {{ + return MACRO_NONE; + }} + // MACRODOWN only works in this function + switch(id) {{ + case UM: + unicode_mode = (unicode_mode + 1) % 2; + break; +{macro_cases} +{unicode_macro_cases} + default: + break; + }} + return MACRO_NONE; +}}; +""" + + +UNICODE_MACRO_TEMPLATE = """ +case {macro_id}: + unicode_action_function(0x{hi:02x}, 0x{lo:02x}); + break; +""".strip() + + +def unicode_macro_cases(config): + for macro_id, uc_hex in config['unicode_macros'].items(): + hi = int(uc_hex, 16) >> 8 + lo = int(uc_hex, 16) & 0xFF + unimacro_keys = ", ".join( + "T({})".format( + "KP_" + digit if digit.isdigit() else digit + ) for digit in uc_hex + ) + yield UNICODE_MACRO_TEMPLATE.format( + macro_id=macro_id, hi=hi, lo=lo + ) + + +def iter_keymap_lines(keymap, row_indents=None): + col_widths = {} + col = 0 + # first pass, figure out the column widths + prev_row_index = None + for code, row_index in keymap.values(): + if row_index != prev_row_index: + col = 0 + if row_indents: + col = row_indents[row_index] + col_widths[col] = max(len(code), col_widths.get(col, 0)) + prev_row_index = row_index + col += 1 + + # second pass, yield the cell values + col = 0 + prev_row_index = None + for key_index in sorted(keymap): + code, row_index = keymap[key_index] + if row_index != prev_row_index: + col = 0 + yield "\n" + if row_indents: + for indent_col in range(row_indents[row_index]): + pad = " " * (col_widths[indent_col] - 4) + yield (" /*-*/" + pad) + col = row_indents[row_index] + else: + yield pad + yield " {}".format(code) + if key_index < len(keymap) - 1: + yield "," + # This will be yielded on the next iteration when + # we know that we're not at the end of a line. + pad = " " * (col_widths[col] - len(code)) + prev_row_index = row_index + col += 1 + + +def iter_keymap_parts(config, keymaps): + # includes + for include_path in config['keymaps_includes']: + yield '#include "{}"\n'.format(include_path) + + yield "\n" + + # definitions + for i, macro_id in enumerate(sorted(config['macro_ids'])): + yield "#define {} {}\n".format(macro_id, i) + + yield "\n" + + for i, layer_name in enumerate(config['layer_lines']): + yield '#define L{0:<3} {0:<5} // {1}\n'.format(i, layer_name) + + yield "\n" + + # keymaps + yield "const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n" + + for i, layer_name in enumerate(config['layer_lines']): + # comment + layer_lines = config['layer_lines'][layer_name] + prefixed_lines = " * " + " * ".join(layer_lines) + yield "/*\n{} */\n".format(prefixed_lines) + + # keymap codes + keymap = keymaps[layer_name] + row_indents = ROW_INDENTS.get(config['layout']) + keymap_lines = "".join(iter_keymap_lines(keymap, row_indents)) + yield "[L{0}] = KEYMAP({1}\n),\n".format(i, keymap_lines) + + yield "};\n\n" + + # no idea what this is for + yield "const uint16_t PROGMEM fn_actions[] = {};\n" + + # macros + yield MACROCODE.format( + macro_cases="", + unicode_macro_cases="\n".join(unicode_macro_cases(config)), + ) + + # TODO: dynamically create blinking lights + yield USERCODE + + +def main(argv=sys.argv[1:]): + if not argv or '-h' in argv or '--help' in argv: + print(__doc__) + return 0 + + in_path = os.path.abspath(argv[0]) + if not os.path.exists(in_path): + print("No such file '{}'".format(in_path)) + return 1 + + if len(argv) > 1: + out_path = os.path.abspath(argv[1]) + else: + dirname = os.path.dirname(in_path) + out_path = os.path.join(dirname, "keymap.c") + + config = parse_config(in_path) + valid_keys = parse_valid_keys(config, out_path) + keymaps = parse_keymaps(config, valid_keys) + + with io.open(out_path, mode="w", encoding="utf-8") as fh: + for part in iter_keymap_parts(config, keymaps): + fh.write(part) + + +if __name__ == '__main__': + sys.exit(main()) diff --git a/keyboards/ergodox/keymaps/german-manuneo/keymap.c b/keyboards/ergodox/keymaps/german-manuneo/keymap.c new file mode 100644 index 000000000..16e92bc23 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-manuneo/keymap.c @@ -0,0 +1,783 @@ +#include "ergodox.h" +#include "action_layer.h" +#include "keymap.h" +#include "keymap_german.h" + +#define UC_ASYMPTOTICALLY_EQUAL_TO 0 +#define UC_DIVISION_SIGN 1 +#define UC_DOWNWARDS_ARROW 2 +#define UC_ELEMENT_OF 3 +#define UC_EMPTY_SET 4 +#define UC_FOR_ALL 5 +#define UC_GREEK_CAPITAL_LETTER_ALPHA 6 +#define UC_GREEK_CAPITAL_LETTER_BETA 7 +#define UC_GREEK_CAPITAL_LETTER_CHI 8 +#define UC_GREEK_CAPITAL_LETTER_DELTA 9 +#define UC_GREEK_CAPITAL_LETTER_EPSILON 10 +#define UC_GREEK_CAPITAL_LETTER_ETA 11 +#define UC_GREEK_CAPITAL_LETTER_GAMMA 12 +#define UC_GREEK_CAPITAL_LETTER_IOTA 13 +#define UC_GREEK_CAPITAL_LETTER_KAPPA 14 +#define UC_GREEK_CAPITAL_LETTER_LAMDA 15 +#define UC_GREEK_CAPITAL_LETTER_MU 16 +#define UC_GREEK_CAPITAL_LETTER_NU 17 +#define UC_GREEK_CAPITAL_LETTER_OMEGA 18 +#define UC_GREEK_CAPITAL_LETTER_OMICRON 19 +#define UC_GREEK_CAPITAL_LETTER_PHI 20 +#define UC_GREEK_CAPITAL_LETTER_PI 21 +#define UC_GREEK_CAPITAL_LETTER_PSI 22 +#define UC_GREEK_CAPITAL_LETTER_RHO 23 +#define UC_GREEK_CAPITAL_LETTER_SIGMA 24 +#define UC_GREEK_CAPITAL_LETTER_TAU 25 +#define UC_GREEK_CAPITAL_LETTER_THETA 26 +#define UC_GREEK_CAPITAL_LETTER_UPSILON 27 +#define UC_GREEK_CAPITAL_LETTER_XI 28 +#define UC_GREEK_CAPITAL_LETTER_ZETA 29 +#define UC_GREEK_SMALL_LETTER_ALPHA 30 +#define UC_GREEK_SMALL_LETTER_BETA 31 +#define UC_GREEK_SMALL_LETTER_CHI 32 +#define UC_GREEK_SMALL_LETTER_DELTA 33 +#define UC_GREEK_SMALL_LETTER_EPSILON 34 +#define UC_GREEK_SMALL_LETTER_ETA 35 +#define UC_GREEK_SMALL_LETTER_FINAL_SIGMA 36 +#define UC_GREEK_SMALL_LETTER_GAMMA 37 +#define UC_GREEK_SMALL_LETTER_IOTA 38 +#define UC_GREEK_SMALL_LETTER_KAPPA 39 +#define UC_GREEK_SMALL_LETTER_LAMDA 40 +#define UC_GREEK_SMALL_LETTER_MU 41 +#define UC_GREEK_SMALL_LETTER_NU 42 +#define UC_GREEK_SMALL_LETTER_OMEGA 43 +#define UC_GREEK_SMALL_LETTER_OMICRON 44 +#define UC_GREEK_SMALL_LETTER_PHI 45 +#define UC_GREEK_SMALL_LETTER_PI 46 +#define UC_GREEK_SMALL_LETTER_PSI 47 +#define UC_GREEK_SMALL_LETTER_RHO 48 +#define UC_GREEK_SMALL_LETTER_SIGMA 49 +#define UC_GREEK_SMALL_LETTER_TAU 50 +#define UC_GREEK_SMALL_LETTER_THETA 51 +#define UC_GREEK_SMALL_LETTER_UPSILON 52 +#define UC_GREEK_SMALL_LETTER_XI 53 +#define UC_GREEK_SMALL_LETTER_ZETA 54 +#define UC_INFINITY 55 +#define UC_LEFTWARDS_ARROW 56 +#define UC_MULTIPLICATION_SIGN 57 +#define UC_NOT_AN_ELEMENT_OF 58 +#define UC_NOT_EQUAL_TO 59 +#define UC_PLUS_MINUS_SIGN 60 +#define UC_RIGHTWARDS_ARROW 61 +#define UC_SUBSCRIPT_EIGHT 62 +#define UC_SUBSCRIPT_FIVE 63 +#define UC_SUBSCRIPT_FOUR 64 +#define UC_SUBSCRIPT_NINE 65 +#define UC_SUBSCRIPT_ONE 66 +#define UC_SUBSCRIPT_SEVEN 67 +#define UC_SUBSCRIPT_SIX 68 +#define UC_SUBSCRIPT_THREE 69 +#define UC_SUBSCRIPT_TWO 70 +#define UC_SUBSCRIPT_ZERO 71 +#define UC_SUPERSCRIPT_EIGHT 72 +#define UC_SUPERSCRIPT_FIVE 73 +#define UC_SUPERSCRIPT_FOUR 74 +#define UC_SUPERSCRIPT_LATIN_SMALL_LETTER_N 75 +#define UC_SUPERSCRIPT_NINE 76 +#define UC_SUPERSCRIPT_ONE 77 +#define UC_SUPERSCRIPT_SEVEN 78 +#define UC_SUPERSCRIPT_SIX 79 +#define UC_SUPERSCRIPT_THREE 80 +#define UC_SUPERSCRIPT_TWO 81 +#define UC_SUPERSCRIPT_ZERO 82 +#define UC_THERE_DOES_NOT_EXIST 83 +#define UC_THERE_EXISTS 84 +#define UC_UPWARDS_ARROW 85 +#define UC_VULGAR_FRACTION_ONE_EIGHTH 86 +#define UC_VULGAR_FRACTION_ONE_FIFTH 87 +#define UC_VULGAR_FRACTION_ONE_HALF 88 +#define UC_VULGAR_FRACTION_ONE_QUARTER 89 +#define UC_VULGAR_FRACTION_ONE_SIXTH 90 +#define UC_VULGAR_FRACTION_ONE_THIRD 91 +#define UC_VULGAR_FRACTION_THREE_QUARTERS 92 +#define UC_VULGAR_FRACTION_TWO_THIRDS 93 +#define UM 94 + +#define L0 0 // layer_0 +#define L1 1 // layer_1 +#define L2 2 // layer_2 +#define L3 3 // layer_3 +#define L4 4 // layer_4 +#define L5 5 // layer_5 +#define L6 6 // layer_6 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * .------------------------------------.------------------------------------. + * |MO(5)| 1 | 2 | 3 | 4 | 5 |ACUT | GRV | 6 | 7 | 8 | 9 | 0 |CIRC | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * |MO(4)| X | P | F | W | G |HOME |TG(2)| H | J | K | L | Q | Z | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * |MO(1)| U | I | A | E | O |-----!-----! S | N | R | T | D | SS | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * |MO(3)| UE | OE | AE | C | V |END | TAB | B | M |COMM| DOT| UP | Y | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | |LGUI|LALT|LCTL| !RCTL|RALT|LEFT|DOWN|RGHT| + * '------------------------' '------------------------' + * .-----------. .-----------. + * |INS |TG(2)| !M(UM)|DELT | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | APP | ! PGUP| ! ! + * ! ! !-----! !-----! ! ! + * |BSPC |LSFT | ESC | ! PGDN|ENTER|SPACE| + * '-----------------' '-----------------' + */ +[L0] = KEYMAP( + MO(5), DE_1, DE_2, DE_3, DE_4, DE_5, DE_ACUT, + MO(4), DE_X, DE_P, DE_F, DE_W, DE_G, KC_HOME, + MO(1), DE_U, DE_I, DE_A, DE_E, DE_O, + MO(3), DE_UE, DE_OE, DE_AE, DE_C, DE_V, KC_END, + KC_TRNS, KC_TRNS, KC_LGUI, KC_LALT, KC_LCTL, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_INS, TG(2), + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_APP, + /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, KC_LSFT, KC_ESC, + DE_GRV, DE_6, DE_7, DE_8, DE_9, DE_0, DE_CIRC, + TG(2), DE_H, DE_J, DE_K, DE_L, DE_Q, DE_Z, + /*-*/ DE_S, DE_N, DE_R, DE_T, DE_D, DE_SS, + KC_TAB, DE_B, DE_M, DE_COMM, DE_DOT, KC_UP, DE_Y, + /*-*/ /*-*/ KC_RCTL, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT, + M(UM), KC_DELT, + KC_PGUP, + KC_PGDN, KC_ENTER, KC_SPACE +), +/* + * .------------------------------------.------------------------------------. + * | |EXLM|DQOT|PARA| | | | | | | | |RING| | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | |ASTR|PIPE|SLSH|LCBR|RCBR| | |HASH|LESS|MORE| |DQOT| | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | |UNDS|MINS|AMPR|LBRC|RBRC|-----!-----!DLR |LPRN|RPRN|TILD|QUOT| QST | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | |PLUS|EQL | | | | |BSLS|PERC|SCLN|COLN| ↑ | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | ← | ↓ | → | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L1] = KEYMAP( + KC_TRNS, DE_EXLM, DE_DQOT, DE_PARA, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, DE_ASTR, DE_PIPE, DE_SLSH, DE_LCBR, DE_RCBR, KC_TRNS, + KC_TRNS, DE_UNDS, DE_MINS, DE_AMPR, DE_LBRC, DE_RBRC, + KC_TRNS, KC_TRNS, DE_PLUS, DE_EQL, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DE_RING, KC_TRNS, + KC_TRNS, DE_HASH, DE_LESS, DE_MORE, KC_TRNS, DE_DQOT, KC_TRNS, + /*-*/ DE_DLR, DE_LPRN, DE_RPRN, DE_TILD, DE_QUOT, DE_QST, + KC_TRNS, DE_BSLS, DE_PERC, DE_SCLN, DE_COLN, M(UC_UPWARDS_ARROW), KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, M(UC_LEFTWARDS_ARROW), M(UC_DOWNWARDS_ARROW), M(UC_RIGHTWARDS_ARROW), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F11 | F12 | F6 | F7 | F8 | F9 |F10 |PEQL | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | | | | | | | | | P7 | P8 | P9 |PAST|PSLS | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | |-----!-----! | P4 | P5 | P6 |PMNS|PMNS | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | | | NLCK| | P1 | P2 | P3 |PPLS|PPLS | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! P0 |PCMM|PDOT|PENT|PENT| + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L2] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PEQL, + KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PAST, KC_PSLS, + /*-*/ KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_PMNS, + KC_NLCK, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PPLS, + /*-*/ /*-*/ KC_P0, KC_PCMM, KC_PDOT, KC_PENT, KC_PENT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | ¹ | ² | ³ | ⁴ | ⁵ | ∀ | | ⁶ | ⁷ | ⁸ | ⁹ | ⁰ | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | × | ½ | ÷ | ¼ | ⅕ | | | ⅙ | | ⅛ | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | ± | AT |EURO| ∅ |-----!-----! ∞ | ⁿ | ∃ | ∈ | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | ⅓ | ≠ | ⅔ | ¾ | ≃ | | |EXLM| | ∄ | ∉ | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L3] = KEYMAP( + KC_TRNS, M(UC_SUPERSCRIPT_ONE), M(UC_SUPERSCRIPT_TWO), M(UC_SUPERSCRIPT_THREE), M(UC_SUPERSCRIPT_FOUR), M(UC_SUPERSCRIPT_FIVE), M(UC_FOR_ALL), + KC_TRNS, M(UC_MULTIPLICATION_SIGN), M(UC_VULGAR_FRACTION_ONE_HALF), M(UC_DIVISION_SIGN), M(UC_VULGAR_FRACTION_ONE_QUARTER), M(UC_VULGAR_FRACTION_ONE_FIFTH), KC_TRNS, + KC_TRNS, KC_TRNS, M(UC_PLUS_MINUS_SIGN), DE_AT, DE_EURO, M(UC_EMPTY_SET), + KC_TRNS, M(UC_VULGAR_FRACTION_ONE_THIRD), M(UC_NOT_EQUAL_TO), M(UC_VULGAR_FRACTION_TWO_THIRDS), M(UC_VULGAR_FRACTION_THREE_QUARTERS), M(UC_ASYMPTOTICALLY_EQUAL_TO), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(UC_SUPERSCRIPT_SIX), M(UC_SUPERSCRIPT_SEVEN), M(UC_SUPERSCRIPT_EIGHT), M(UC_SUPERSCRIPT_NINE), M(UC_SUPERSCRIPT_ZERO), KC_TRNS, + KC_TRNS, M(UC_VULGAR_FRACTION_ONE_SIXTH), KC_TRNS, M(UC_VULGAR_FRACTION_ONE_EIGHTH), KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ M(UC_INFINITY), M(UC_SUPERSCRIPT_LATIN_SMALL_LETTER_N), M(UC_THERE_EXISTS), M(UC_ELEMENT_OF), KC_TRNS, KC_TRNS, + KC_TRNS, DE_EXLM, KC_TRNS, M(UC_THERE_DOES_NOT_EXIST), M(UC_NOT_AN_ELEMENT_OF), KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | ₁ | ₂ | ₃ | ₄ | ₅ | | | ₆ | ₇ | ₈ | ₉ | ₀ | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | χ | π | φ | ω | γ | | | η | ξ | κ | λ | | ζ | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | υ | ι | α | ε | ο |-----!-----! σ | ν | ρ | τ | δ | ς | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | θ | | | | | | β | μ | | | | ψ | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L4] = KEYMAP( + KC_TRNS, M(UC_SUBSCRIPT_ONE), M(UC_SUBSCRIPT_TWO), M(UC_SUBSCRIPT_THREE), M(UC_SUBSCRIPT_FOUR), M(UC_SUBSCRIPT_FIVE), KC_TRNS, + KC_TRNS, M(UC_GREEK_SMALL_LETTER_CHI), M(UC_GREEK_SMALL_LETTER_PI), M(UC_GREEK_SMALL_LETTER_PHI), M(UC_GREEK_SMALL_LETTER_OMEGA), M(UC_GREEK_SMALL_LETTER_GAMMA), KC_TRNS, + KC_TRNS, M(UC_GREEK_SMALL_LETTER_UPSILON), M(UC_GREEK_SMALL_LETTER_IOTA), M(UC_GREEK_SMALL_LETTER_ALPHA), M(UC_GREEK_SMALL_LETTER_EPSILON), M(UC_GREEK_SMALL_LETTER_OMICRON), + KC_TRNS, KC_TRNS, M(UC_GREEK_SMALL_LETTER_THETA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(UC_SUBSCRIPT_SIX), M(UC_SUBSCRIPT_SEVEN), M(UC_SUBSCRIPT_EIGHT), M(UC_SUBSCRIPT_NINE), M(UC_SUBSCRIPT_ZERO), KC_TRNS, + KC_TRNS, M(UC_GREEK_SMALL_LETTER_ETA), M(UC_GREEK_SMALL_LETTER_XI), M(UC_GREEK_SMALL_LETTER_KAPPA), M(UC_GREEK_SMALL_LETTER_LAMDA), KC_TRNS, M(UC_GREEK_SMALL_LETTER_ZETA), + /*-*/ M(UC_GREEK_SMALL_LETTER_SIGMA), M(UC_GREEK_SMALL_LETTER_NU), M(UC_GREEK_SMALL_LETTER_RHO), M(UC_GREEK_SMALL_LETTER_TAU), M(UC_GREEK_SMALL_LETTER_DELTA), M(UC_GREEK_SMALL_LETTER_FINAL_SIGMA), + KC_TRNS, M(UC_GREEK_SMALL_LETTER_BETA), M(UC_GREEK_SMALL_LETTER_MU), KC_TRNS, KC_TRNS, KC_TRNS, M(UC_GREEK_SMALL_LETTER_PSI), + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | Χ | Π | Φ | Ω | Γ | | | Η | Ξ | Κ | Λ | | Ζ | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | Υ | Ι | Α | Ε | Ο |-----!-----! Σ | Ν | Ρ | Τ | Δ | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | Θ | | | | | | Β | Μ | | | | Ψ | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L5] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_CHI), M(UC_GREEK_CAPITAL_LETTER_PI), M(UC_GREEK_CAPITAL_LETTER_PHI), M(UC_GREEK_CAPITAL_LETTER_OMEGA), M(UC_GREEK_CAPITAL_LETTER_GAMMA), KC_TRNS, + KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_UPSILON), M(UC_GREEK_CAPITAL_LETTER_IOTA), M(UC_GREEK_CAPITAL_LETTER_ALPHA), M(UC_GREEK_CAPITAL_LETTER_EPSILON), M(UC_GREEK_CAPITAL_LETTER_OMICRON), + KC_TRNS, KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_THETA), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_ETA), M(UC_GREEK_CAPITAL_LETTER_XI), M(UC_GREEK_CAPITAL_LETTER_KAPPA), M(UC_GREEK_CAPITAL_LETTER_LAMDA), KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_ZETA), + /*-*/ M(UC_GREEK_CAPITAL_LETTER_SIGMA), M(UC_GREEK_CAPITAL_LETTER_NU), M(UC_GREEK_CAPITAL_LETTER_RHO), M(UC_GREEK_CAPITAL_LETTER_TAU), M(UC_GREEK_CAPITAL_LETTER_DELTA), KC_TRNS, + KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_BETA), M(UC_GREEK_CAPITAL_LETTER_MU), KC_TRNS, KC_TRNS, KC_TRNS, M(UC_GREEK_CAPITAL_LETTER_PSI), + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | | | | | | | | | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | |-----!-----! | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | | | | | | | | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L6] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = {}; + +#define UC_MODE_WIN 0 +#define UC_MODE_LINUX 1 +#define UC_MODE_OSX 2 + +// TODO: allow default mode to be configured +static uint16_t unicode_mode = UC_MODE_WIN; + +uint16_t hextokeycode(uint8_t hex) { + if (hex == 0x0) { + return KC_P0; + } + if (hex < 0xA) { + return KC_P1 + (hex - 0x1); + } + return KC_A + (hex - 0xA); +} + +void unicode_action_function(uint16_t hi, uint16_t lo) { + switch (unicode_mode) { + case UC_MODE_WIN: + register_code(KC_LALT); + + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LALT); + break; + case UC_MODE_LINUX: + register_code(KC_LCTL); + register_code(KC_LSFT); + + register_code(KC_U); + unregister_code(KC_U); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LCTL); + unregister_code(KC_LSFT); + break; + case UC_MODE_OSX: + break; + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (!record->event.pressed) { + return MACRO_NONE; + } + // MACRODOWN only works in this function + switch(id) { + case UM: + unicode_mode = (unicode_mode + 1) % 2; + break; + +case UC_GREEK_SMALL_LETTER_OMICRON: + unicode_action_function(0x03, 0xbf); + break; +case UC_LEFTWARDS_ARROW: + unicode_action_function(0x21, 0x90); + break; +case UC_GREEK_CAPITAL_LETTER_RHO: + unicode_action_function(0x03, 0xa1); + break; +case UC_SUBSCRIPT_THREE: + unicode_action_function(0x20, 0x83); + break; +case UC_VULGAR_FRACTION_ONE_EIGHTH: + unicode_action_function(0x21, 0x5b); + break; +case UC_GREEK_SMALL_LETTER_LAMDA: + unicode_action_function(0x03, 0xbb); + break; +case UC_VULGAR_FRACTION_ONE_THIRD: + unicode_action_function(0x21, 0x53); + break; +case UC_GREEK_SMALL_LETTER_XI: + unicode_action_function(0x03, 0xbe); + break; +case UC_THERE_DOES_NOT_EXIST: + unicode_action_function(0x22, 0x04); + break; +case UC_SUPERSCRIPT_ONE: + unicode_action_function(0x00, 0xb9); + break; +case UC_GREEK_SMALL_LETTER_BETA: + unicode_action_function(0x03, 0xb2); + break; +case UC_SUBSCRIPT_FIVE: + unicode_action_function(0x20, 0x85); + break; +case UC_GREEK_CAPITAL_LETTER_IOTA: + unicode_action_function(0x03, 0x99); + break; +case UC_VULGAR_FRACTION_ONE_FIFTH: + unicode_action_function(0x21, 0x55); + break; +case UC_GREEK_SMALL_LETTER_PSI: + unicode_action_function(0x03, 0xc8); + break; +case UC_SUBSCRIPT_NINE: + unicode_action_function(0x20, 0x89); + break; +case UC_SUPERSCRIPT_FOUR: + unicode_action_function(0x20, 0x74); + break; +case UC_RIGHTWARDS_ARROW: + unicode_action_function(0x21, 0x92); + break; +case UC_SUPERSCRIPT_SIX: + unicode_action_function(0x20, 0x76); + break; +case UC_DOWNWARDS_ARROW: + unicode_action_function(0x21, 0x93); + break; +case UC_GREEK_SMALL_LETTER_PI: + unicode_action_function(0x03, 0xc0); + break; +case UC_SUPERSCRIPT_TWO: + unicode_action_function(0x00, 0xb2); + break; +case UC_GREEK_CAPITAL_LETTER_OMEGA: + unicode_action_function(0x03, 0xa9); + break; +case UC_GREEK_CAPITAL_LETTER_PSI: + unicode_action_function(0x03, 0xa8); + break; +case UC_SUBSCRIPT_FOUR: + unicode_action_function(0x20, 0x84); + break; +case UC_GREEK_CAPITAL_LETTER_NU: + unicode_action_function(0x03, 0x9d); + break; +case UC_DIVISION_SIGN: + unicode_action_function(0x00, 0xf7); + break; +case UC_GREEK_SMALL_LETTER_SIGMA: + unicode_action_function(0x03, 0xc3); + break; +case UC_GREEK_SMALL_LETTER_RHO: + unicode_action_function(0x03, 0xc1); + break; +case UC_VULGAR_FRACTION_ONE_SIXTH: + unicode_action_function(0x21, 0x59); + break; +case UC_GREEK_SMALL_LETTER_GAMMA: + unicode_action_function(0x03, 0xb3); + break; +case UC_VULGAR_FRACTION_TWO_THIRDS: + unicode_action_function(0x21, 0x54); + break; +case UC_GREEK_SMALL_LETTER_NU: + unicode_action_function(0x03, 0xbd); + break; +case UC_GREEK_SMALL_LETTER_ZETA: + unicode_action_function(0x03, 0xb6); + break; +case UC_GREEK_SMALL_LETTER_EPSILON: + unicode_action_function(0x03, 0xb5); + break; +case UC_GREEK_SMALL_LETTER_KAPPA: + unicode_action_function(0x03, 0xba); + break; +case UC_SUPERSCRIPT_SEVEN: + unicode_action_function(0x20, 0x77); + break; +case UC_GREEK_CAPITAL_LETTER_PI: + unicode_action_function(0x03, 0xa0); + break; +case UC_GREEK_SMALL_LETTER_FINAL_SIGMA: + unicode_action_function(0x03, 0xc2); + break; +case UC_GREEK_CAPITAL_LETTER_XI: + unicode_action_function(0x03, 0x9e); + break; +case UC_GREEK_SMALL_LETTER_THETA: + unicode_action_function(0x03, 0xb8); + break; +case UC_GREEK_SMALL_LETTER_ETA: + unicode_action_function(0x03, 0xb7); + break; +case UC_SUBSCRIPT_TWO: + unicode_action_function(0x20, 0x82); + break; +case UC_ASYMPTOTICALLY_EQUAL_TO: + unicode_action_function(0x22, 0x43); + break; +case UC_GREEK_SMALL_LETTER_ALPHA: + unicode_action_function(0x03, 0xb1); + break; +case UC_GREEK_CAPITAL_LETTER_PHI: + unicode_action_function(0x03, 0xa6); + break; +case UC_GREEK_SMALL_LETTER_PHI: + unicode_action_function(0x03, 0xc6); + break; +case UC_INFINITY: + unicode_action_function(0x22, 0x1e); + break; +case UC_GREEK_CAPITAL_LETTER_OMICRON: + unicode_action_function(0x03, 0x9f); + break; +case UC_ELEMENT_OF: + unicode_action_function(0x22, 0x08); + break; +case UC_MULTIPLICATION_SIGN: + unicode_action_function(0x00, 0xd7); + break; +case UC_SUBSCRIPT_ZERO: + unicode_action_function(0x20, 0x80); + break; +case UC_GREEK_CAPITAL_LETTER_SIGMA: + unicode_action_function(0x03, 0xa3); + break; +case UC_GREEK_SMALL_LETTER_OMEGA: + unicode_action_function(0x03, 0xc9); + break; +case UC_SUBSCRIPT_ONE: + unicode_action_function(0x20, 0x81); + break; +case UC_GREEK_CAPITAL_LETTER_ZETA: + unicode_action_function(0x03, 0x96); + break; +case UC_GREEK_SMALL_LETTER_TAU: + unicode_action_function(0x03, 0xc4); + break; +case UC_SUPERSCRIPT_FIVE: + unicode_action_function(0x20, 0x75); + break; +case UC_THERE_EXISTS: + unicode_action_function(0x22, 0x03); + break; +case UC_PLUS_MINUS_SIGN: + unicode_action_function(0x00, 0xb1); + break; +case UC_VULGAR_FRACTION_THREE_QUARTERS: + unicode_action_function(0x00, 0xbe); + break; +case UC_SUPERSCRIPT_THREE: + unicode_action_function(0x00, 0xb3); + break; +case UC_EMPTY_SET: + unicode_action_function(0x22, 0x05); + break; +case UC_UPWARDS_ARROW: + unicode_action_function(0x21, 0x91); + break; +case UC_SUPERSCRIPT_NINE: + unicode_action_function(0x20, 0x79); + break; +case UC_GREEK_SMALL_LETTER_DELTA: + unicode_action_function(0x03, 0xb4); + break; +case UC_GREEK_SMALL_LETTER_MU: + unicode_action_function(0x03, 0xbc); + break; +case UC_GREEK_CAPITAL_LETTER_KAPPA: + unicode_action_function(0x03, 0x9a); + break; +case UC_SUBSCRIPT_EIGHT: + unicode_action_function(0x20, 0x88); + break; +case UC_GREEK_CAPITAL_LETTER_ALPHA: + unicode_action_function(0x03, 0x91); + break; +case UC_SUBSCRIPT_SEVEN: + unicode_action_function(0x20, 0x87); + break; +case UC_GREEK_CAPITAL_LETTER_BETA: + unicode_action_function(0x03, 0x92); + break; +case UC_GREEK_CAPITAL_LETTER_ETA: + unicode_action_function(0x03, 0x97); + break; +case UC_SUPERSCRIPT_EIGHT: + unicode_action_function(0x20, 0x78); + break; +case UC_SUPERSCRIPT_ZERO: + unicode_action_function(0x20, 0x70); + break; +case UC_NOT_AN_ELEMENT_OF: + unicode_action_function(0x22, 0x09); + break; +case UC_GREEK_SMALL_LETTER_UPSILON: + unicode_action_function(0x03, 0xc5); + break; +case UC_NOT_EQUAL_TO: + unicode_action_function(0x22, 0x60); + break; +case UC_GREEK_CAPITAL_LETTER_CHI: + unicode_action_function(0x03, 0xa7); + break; +case UC_FOR_ALL: + unicode_action_function(0x22, 0x00); + break; +case UC_GREEK_CAPITAL_LETTER_TAU: + unicode_action_function(0x03, 0xa4); + break; +case UC_VULGAR_FRACTION_ONE_QUARTER: + unicode_action_function(0x00, 0xbc); + break; +case UC_GREEK_SMALL_LETTER_CHI: + unicode_action_function(0x03, 0xc7); + break; +case UC_GREEK_CAPITAL_LETTER_THETA: + unicode_action_function(0x03, 0x98); + break; +case UC_GREEK_SMALL_LETTER_IOTA: + unicode_action_function(0x03, 0xb9); + break; +case UC_GREEK_CAPITAL_LETTER_LAMDA: + unicode_action_function(0x03, 0x9b); + break; +case UC_SUPERSCRIPT_LATIN_SMALL_LETTER_N: + unicode_action_function(0x20, 0x7f); + break; +case UC_GREEK_CAPITAL_LETTER_UPSILON: + unicode_action_function(0x03, 0xa5); + break; +case UC_GREEK_CAPITAL_LETTER_MU: + unicode_action_function(0x03, 0x9c); + break; +case UC_GREEK_CAPITAL_LETTER_EPSILON: + unicode_action_function(0x03, 0x95); + break; +case UC_GREEK_CAPITAL_LETTER_GAMMA: + unicode_action_function(0x03, 0x93); + break; +case UC_SUBSCRIPT_SIX: + unicode_action_function(0x20, 0x86); + break; +case UC_GREEK_CAPITAL_LETTER_DELTA: + unicode_action_function(0x03, 0x94); + break; +case UC_VULGAR_FRACTION_ONE_HALF: + unicode_action_function(0x00, 0xbd); + break; + default: + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case L1: + ergodox_right_led_1_on(); + break; + case L2: + ergodox_right_led_2_on(); + break; + case L3: + ergodox_right_led_3_on(); + break; + case L4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case L5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + // case L6: + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + // case L7: + // ergodox_right_led_1_on(); + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + default: + ergodox_board_led_off(); + break; + } +}; diff --git a/keyboards/ergodox/keymaps/german-manuneo/keymap.md b/keyboards/ergodox/keymaps/german-manuneo/keymap.md new file mode 100644 index 000000000..837b25446 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-manuneo/keymap.md @@ -0,0 +1,188 @@ +# ManuNeo Ergodox Keyboard Layout + +Compile this file to a `keymap.c` file using `compile_keymap.py` + + python compile_keymap.py keymaps/german-manuneo/keymap.md + +Tested with python 2.7 and python 3.4 + + +# Layout Config + + { + "layout": "ergodox_ez", + "keymaps_includes": [ + "ergodox.h", + "action_layer.h", + "keymap_common.h", + "keymap_extras/keymap_german.h", + ], + "key_prefixes": ["DE_", "KC_"], + "macros": { + // TODO: implement macros + // "MUC": "", + }, + // TODO: implement default unicode mode + } + + +# Layers + + +## Layer 0 + + .------------------------------------.------------------------------------. + |MO(5)| 1 | 2 | 3 | 4 | 5 |ACUT | GRV | 6 | 7 | 8 | 9 | 0 |CIRC | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + |MO(4)| X | P | F | W | G |HOME |TG(2)| H | J | K | L | Q | Z | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |MO(1)| U | I | A | E | O |-----!-----! S | N | R | T | D | SS | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |MO(3)| UE | OE | AE | C | V |END | TAB | B | M |COMM| DOT| UP | Y | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | |LGUI|LALT|LCTL| !RCTL|RALT|LEFT|DOWN|RGHT| + '------------------------' '------------------------' + .-----------. .-----------. + |INS |TG(2)| !M(UM)|DELT | + .-----+-----+-----! !-----+-----+-----. + ! ! | APP | ! PGUP| ! ! + ! ! !-----! !-----! ! ! + |BSPC |LSFT | ESC | ! PGDN|ENTER|SPACE| + '-----------------' '-----------------' + + +## Layer 1 + + .------------------------------------.------------------------------------. + | |EXLM|DQOT|PARA| | | | | | | | |RING| | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | |ASTR|PIPE|SLSH|LCBR|RCBR| | |HASH|LESS|MORE| |DQOT| | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | |UNDS|MINS|AMPR|LBRC|RBRC|-----!-----!DLR |LPRN|RPRN|TILD|QUOT| QST | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | |PLUS|EQL | | | | |BSLS|PERC|SCLN|COLN| ↑ | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | ← | ↓ | → | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 2 + + .------------------------------------.------------------------------------. + | | F1 | F2 | F3 | F4 | F5 | F11 | F12 | F6 | F7 | F8 | F9 |F10 |PEQL | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | | | | | | | | | P7 | P8 | P9 |PAST|PSLS | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | |-----!-----! | P4 | P5 | P6 |PMNS|PMNS | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | | | NLCK| | P1 | P2 | P3 |PPLS|PPLS | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! P0 |PCMM|PDOT|PENT|PENT| + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + + +## Layer 3 + +http://symbolcodes.tlt.psu.edu/bylanguage/mathchart.html + + .------------------------------------.------------------------------------. + | | ¹ | ² | ³ | ⁴ | ⁵ | ∀ | | ⁶ | ⁷ | ⁸ | ⁹ | ⁰ | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | × | ½ | ÷ | ¼ | ⅕ | | | ⅙ | | ⅛ | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | ± | AT |EURO| ∅ |-----!-----! ∞ | ⁿ | ∃ | ∈ | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | ⅓ | ≠ | ⅔ | ¾ | ≃ | | |EXLM| | ∄ | ∉ | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 4 + + + .------------------------------------.------------------------------------. + | | ₁ | ₂ | ₃ | ₄ | ₅ | | | ₆ | ₇ | ₈ | ₉ | ₀ | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | χ | π | φ | ω | γ | | | η | ξ | κ | λ | | ζ | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | υ | ι | α | ε | ο |-----!-----! σ | ν | ρ | τ | δ | ς | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | θ | | | | | | β | μ | | | | ψ | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 5 + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | Χ | Π | Φ | Ω | Γ | | | Η | Ξ | Κ | Λ | | Ζ | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | Υ | Ι | Α | Ε | Ο |-----!-----! Σ | Ν | Ρ | Τ | Δ | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | Θ | | | | | | Β | Μ | | | | Ψ | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 6 + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | | | | | | | | | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | |-----!-----! | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | | | | | | | | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + diff --git a/keyboards/ergodox/keymaps/german/keymap.c b/keyboards/ergodox/keymaps/german/keymap.c new file mode 100644 index 000000000..9b2f6ffa2 --- /dev/null +++ b/keyboards/ergodox/keymaps/german/keymap.c @@ -0,0 +1,185 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german.h" + +// Layer names +#define BASE 0 // default layer +#define SYMB 1 // symbol layer +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ^ | 1 | 2 | 3 | 4 | 5 | Play | | Next | 6 | 7 | 8 | 9 | 0 | ß | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L2 | Z | U | I | O | P | Ü | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä/L2 | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift | Y | X | C | V | B | | | | N | M | , | . |-/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | </L1 |#/Ctrl| ´ | - | + | | Right| Down | Up | Left | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------+------+------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,DE_LESS),CTL_T(DE_HASH), DE_ACUT, DE_MINS, DE_PLUS, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_MNXT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(2), DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, + KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(DE_MINS), KC_RSFT, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_FN1, + KC_LALT,CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,DE_EXLM,DE_AT, DE_LCBR,DE_RCBR,DE_PIPE,KC_TRNS, + KC_TRNS,DE_HASH,DE_DLR, DE_LPRN,DE_RPRN,DE_GRV, + KC_TRNS,DE_PERC,DE_CIRC,DE_LBRC,DE_RBRC,DE_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, DE_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, DE_PLUS, KC_TRNS, + KC_TRNS, DE_AMPR, KC_1, KC_2, KC_3, DE_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, DE_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | |MsAcl0|MsAcl1|MsAcl2| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Back |Forwd | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11, + KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12, + KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case MDIA: + ergodox_right_led_2_on(); + break; + default: + ergodox_board_led_off(); + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/j3rn/keymap.c b/keyboards/ergodox/keymaps/j3rn/keymap.c new file mode 100644 index 000000000..43c8f30a3 --- /dev/null +++ b/keyboards/ergodox/keymaps/j3rn/keymap.c @@ -0,0 +1,187 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Grv | 1 | 2 | 3 | 4 | 5 | [ | | ] | 6 | 7 | 8 | 9 | 0 | BkSp | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | - | | = | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Ctrl/Esc|A / L2| S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | ~L1 | ~L2 |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | Home | | PgUp |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | End | | PgDn | | | + * |Space | LGui |------| |------| Tab |Enter | + * | | |Shift | | Alt | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MINS, + CTL_T(KC_ESC), LT(MDIA, KC_A),KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_FN1, KC_FN2, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + + ALT_T(KC_APP), KC_HOME, + KC_END, + KC_SPC, KC_LGUI, KC_LSHIFT, + // right hand + KC_RBRC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_EQL, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + + KC_PGUP, CTL_T(KC_ESC), + KC_PGDN, + KC_LALT, KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | Lclk | Rclk | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------|MsLeft|MsDown| MsUp |MsRght| | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, + KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_LAYER_TAP_TOGGLE(MDIA) // FN2 - Momentary Layer 2 (Media) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/j3rn/readme.md b/keyboards/ergodox/keymaps/j3rn/readme.md new file mode 100644 index 000000000..fc4b64042 --- /dev/null +++ b/keyboards/ergodox/keymaps/j3rn/readme.md @@ -0,0 +1,29 @@ +# J3RN's Mac-centric ErgoDox EZ keymap + +## Motivation + +Essentially, I wanted to switch to a layout that was less jarring than the default ErgoDox EZ layout, and did not require finger gymnastics to perform common OS X shortcuts (most of which involve the CMD (LGui) key). + +## How is it different from the default ErgoDox EZ layout? + +This layout more closely resembles that of the Mac keyboard, and has some other goodness baked in. Here is a rundown of what that means: + +### Mac-like changes + +- **The key to the left of "1" is "~" instead of "=".** +- **The key to the right of "0" is Backspace instead of "-"** (misleadingly labeled "delete" on the Mac's keyboard). There was no room to fit in "-" and "=" between "0" and Backspace, unfortunately. +- **The key to the left of "Q" is Tab instead of Delete.** +- **The rightmost big key on the left thumb is CMD (LGui) instead of Backspace.** + +### Other changes + +- **The button to the left of "A" is Ctrl/Esc instead of Backspace.** This is actually how I have the keyboard on my Macbook set up to be, since it's loads more convenient than a CAPS LOCK key. This is the Ctrl key I find myself using most. +- **Mouse uses Vim-style navigation**. To activate "Media mode," hold the 'a' key. This allows you to move the mouse around with hjkl just like in Vim. Additionally, right and left click are the conveniently placed 'i' and 'o' keys. +- **The key to the right of "5" and the key to left of "6" are "[" and "]", respectively, instead of Left and Right.** There is a more convenient set of Left and Right already present. Truth be told, I don't really use these keys, as they are a stretch to reach. +- **The Toggle L1 keys have been replaced by the otherwise displaced "-" and "=".** They are laid out, left-to-right, in the same order as on the Mac keyboard. Honestly, they are not terribly conveniently placed, and their placement might change in a later version. I found that I did not toggle L1 frequently at all, and found using the momentary keys to access L1 to fit my workflow better. +- **The "~"/L1 key in the bottom-left is now just momentary L1.** The "~" key was moved to the top-left as mentioned before, and I like to keep my multi-use keys to a minimum due to the latency for them to switch from "press" to "hold." +- **The Home and End buttons have been shifted up on the left thumb, and Shift inserted below them.** This makes doing Shift-5 and other such combinations less painful. +- **The Page Up and Page Down buttons have been shifted up on the right thumb, and Alt was moved from above them to below them.** I use Alt more than Page Up or Page Down (mostly in terminal applications), and thought that it deserved a more accessible location. + + +**I'm always open to feedback and/or suggestions!** diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c new file mode 100644 index 000000000..dda253fa4 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -0,0 +1,118 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +// TODO: Define layer names that make sense for the ErgoDox EZ. +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_NO, + KC_NO, KC_LCTL, KC_LALT,KC_LGUI, MO(2), + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_SPC,KC_END, + // right hand + KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, + KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, + MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, + KC_NO, KC_NO, + KC_PGUP, + KC_PGDN, KC_SPC,KC_SPC + ), +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_TRNS, KC_F12, KC_NO, KC_NO, KC_NO, RESET, KC_TRNS, + KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + KC_TRNS, KC_F12, KC_NO, KC_NO, KC_NO, RESET, KC_TRNS, + KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/jacobono/img/colemak-default-layer.png b/keyboards/ergodox/keymaps/jacobono/img/colemak-default-layer.png Binary files differnew file mode 100644 index 000000000..06f63c496 --- /dev/null +++ b/keyboards/ergodox/keymaps/jacobono/img/colemak-default-layer.png diff --git a/keyboards/ergodox/keymaps/jacobono/img/number-dpad-layer.png b/keyboards/ergodox/keymaps/jacobono/img/number-dpad-layer.png Binary files differnew file mode 100644 index 000000000..4dd718278 --- /dev/null +++ b/keyboards/ergodox/keymaps/jacobono/img/number-dpad-layer.png diff --git a/keyboards/ergodox/keymaps/jacobono/img/symbol-layer.png b/keyboards/ergodox/keymaps/jacobono/img/symbol-layer.png Binary files differnew file mode 100644 index 000000000..ee224cf0c --- /dev/null +++ b/keyboards/ergodox/keymaps/jacobono/img/symbol-layer.png diff --git a/keyboards/ergodox/keymaps/jacobono/keymap.c b/keyboards/ergodox/keymaps/jacobono/keymap.c new file mode 100644 index 000000000..dc7382bfe --- /dev/null +++ b/keyboards/ergodox/keymaps/jacobono/keymap.c @@ -0,0 +1,273 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define COLEMAK 0 // new colemak layout +#define QWERTY 1 // default layer +#define SYMB 2 // symbols +#define NUMPAD 3 // number pad +#define MDIA 4 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Basic COLEMAK layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | G | | | | J | L | U | Y | ; | TAB | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | R | S | T | D |------| |------| H | N | E | I | O | DEL | + * |--------+------+------+------+------+------| | LGUI(TAB)------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | K | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | L1 | | | UP |MO(L2)| |MO(L2)| Down | | ALT | RGUI | + * `----------------------------------' `------------------------------------' + * ,-------------. ,---------------. + * | LGUI | App | |Ctrl/Esc| Alt | + * ,------|------|------| |--------+--------+------. + * | | |QUKSL | | QUKSL | | | + * |Space |ENTER |------| |--------| ENTER |Space | + * | | |MO(L3)| | MO(L3) | | | + * `--------------------' `------------------------' + */ + + // If it accepts an argument (i.e, is a function), it doesn't need KC_. + // Otherwise, it needs KC_* + [COLEMAK] = KEYMAP( // layer 0 : Colemak layout default layer + // left hand + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_TRNS, + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_TRNS, + TG(QWERTY), KC_TRNS, KC_TRNS,KC_UP, MO(SYMB), + KC_LGUI, KC_APP, + LGUI(S(KC_SPC)), + KC_SPC,KC_ENT,MO(NUMPAD), + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, + KC_TRNS, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_TAB, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_DEL, + LGUI(KC_TAB), KC_K, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + MO(SYMB), KC_DOWN, KC_TRNS, KC_RALT, KC_RGUI, + CTL_T(KC_ESC), KC_LALT, + LGUI(S(KC_SPC)), + MO(NUMPAD), KC_ENT, KC_SPC), + + /* Keymap 1: Basic QWERTY layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | BkSp | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | DEL | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L0 | | L0 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Ctrl | A | S | D | F | G |------| |------| H | J | K | L |; / L4| CTRL | + * |--------+------+------+------+------+------| Alt | | Alt |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L3| '" |AltShf| Left |MO(L2)| |MO(L2)| Down | [ | ] | ~L3 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | Tab | BkSp | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space| LGUI |------| |------| RGUI |Enter | + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ + // If it accepts an argument (i.e, is a function), it doesn't need KC_. + // Otherwise, it needs KC_* + [QWERTY] = KEYMAP( // layer 1 + // left hand + KC_BSPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_LALT, + KC_TRNS, KC_QUOT, LALT(KC_LSFT), KC_LEFT, MO(SYMB), + KC_TAB, KC_DELT, + KC_HOME, + KC_SPC, KC_LGUI, KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, + KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), KC_RCTRL, + KC_RALT, KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + MO(SYMB), KC_DOWN, KC_LBRC, KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN, KC_RGUI, KC_ENT), + + + /* Keymap 2: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | @ | * | = | _ | | | | ~ | { | } | # | : | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | ! | + | - | " |------| |------| " | ( | ) | ' | ` | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | % | ^ | $ | & | | | | ; | [ | ] | \ | / | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ + // SYMBOL + [SYMB] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_TRNS, KC_AT, KC_ASTR, KC_EQL, KC_UNDS, KC_TRNS, + KC_TRNS, KC_PIPE, KC_EXLM, KC_PLUS, KC_MINS, S(KC_QUOTE), + KC_TRNS, KC_TRNS, KC_PERC, KC_CIRC, KC_DLR, KC_AMPR, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_TILD, KC_LCBR, KC_RCBR, KC_HASH, S(KC_SCLN), KC_F12, + S(KC_QUOTE),KC_LPRN, KC_RPRN, KC_QUOTE, KC_GRV, KC_TRNS, + KC_TRNS, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_SLSH, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap 3: Numpad Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | UP | | | | | | $ | 7 | 8 | 9 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | LEFT | DOWN | RIGHT| |------| |------| = | 4 | 5 | 6 | - | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | 1 | 2 | 3 | * | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | , | 0 | . | / | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ + // Numpad + [NUMPAD] = KEYMAP( + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RIGHT,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_DLR, KC_7, KC_8, KC_9, KC_PLUS, KC_TRNS, + KC_EQL, KC_4, KC_5, KC_6, KC_MINS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_ASTR, KC_TRNS, + KC_COMMA,KC_0, KC_DOT, KC_SLSH, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap 4: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ + // MEDIA AND MOUSE + KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/jacobono/readme.md b/keyboards/ergodox/keymaps/jacobono/readme.md new file mode 100644 index 000000000..48de0509f --- /dev/null +++ b/keyboards/ergodox/keymaps/jacobono/readme.md @@ -0,0 +1,34 @@ +# Default Layer # + +I'm using the colemak layer -- customized a bit to work a bit better when using spacemacs as my editor. + + + +## Special Keys ## + +`SC1` => `LGUI + TAB` + +`SC2` => `LGUI + SPACE + TAB` + +`L1` => Switch to QWERTY Layout + +`T(L2)` => Toggle Symbol Layer + +`T(L3)` => Toggle Number and D-Pad Layer + +# QWERTY # + +Nothing special here -- just need this layer tucked away for the `WASD`. Which is literally the only reason I use it. +Just have the same button to toggle back to colemak. + +# Symbol Layer # + + + +This is just putting matching closing symbols next to each other -- useful when editing lisp. + +# Number and D-Pad Layer # + +Just a basic number layer with a D-PAD on the other side. + + diff --git a/keyboards/ergodox/keymaps/jgarr/keymap.c b/keyboards/ergodox/keymaps/jgarr/keymap.c new file mode 100644 index 000000000..42d58421d --- /dev/null +++ b/keyboards/ergodox/keymaps/jgarr/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,-----------------------------------------------------. + * | Grv | 1 | 2 | 3 | 4 | 5 | Del | |Backspace| 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+------+-------------| |---------+------+------+------+------+------+--------| + * | Tab | ' | , | . | P | Y | L1 | | L1 | F | G | C | R | L | / | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Ctrl/Esc| A | O | E | U | I |------| |---------| D | H | T | N |S / L2| - | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |:/Ctrl| Q | J | K | X | | | | B | M | W | V |Z/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `----------------+------+------+------+------+--------' + * | Ctrl | LGui | Alt | Left | Right| | Up | Down | [ | ] | = | + * `----------------------------------' `----------------------------------' + * ,--------------. ,-------------. + * | AltShf| LGui | | Alt | ~L1 | + * ,------|-------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp |------| |------| Enter |Space | + * | |ace | End | | PgDn | | | + * `---------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, TG(1), + CTL_T(KC_ESC), KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, ALL_T(KC_NO), + KC_LCTL, KC_LGUI, KC_LALT, KC_LEFT, KC_RGHT, + LALT(KC_LSFT), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_BSPC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + TG(1), KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, LT(MDIA, KC_S), KC_MINS, + MEH_T(KC_NO),KC_B, KC_M, KC_W, KC_V, CTL_T(KC_Z), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_EQL, + KC_LALT, KC_FN1, + KC_PGUP, + KC_PGDN,KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/josh/keymap.c b/keyboards/ergodox/keymaps/josh/keymap.c new file mode 100644 index 000000000..488b21427 --- /dev/null +++ b/keyboards/ergodox/keymaps/josh/keymap.c @@ -0,0 +1,205 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +//macros +#define CTL_SFT_T 100 +#define CTL_SFT_G 101 +#define CTL_ALT_H 102 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | M 100| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * |TAB /Alt| Q | W | E | R | T | Meh | | Meh | Y | U | I | O | P |\ / ALT | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCTL | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / CTL | + * |--------+------+------+------+------+------| ~L1 | | ~L1 |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | WIN | ` | M 102| M 101|AltShf| |AltShf| Left | Down | Up | Right | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LALT | | Alt | CAPS | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Delete |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + ALT_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, ALL_T(KC_NO), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(SYMB), + KC_LGUI, KC_GRV, M(CTL_ALT_H),M(CTL_SFT_G),LALT(KC_LSFT), + CTL_T(KC_APP), KC_LALT, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + M(CTL_SFT_T),KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + MEH_T(KC_NO),KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),CTL_T(KC_QUOT), + MO(SYMB), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + LALT(KC_LSFT),KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, + KC_LALT, KC_CAPS, + KC_PGUP, + KC_PGDN,KC_DEL, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | CALC | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Left | Down | Up | Right| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_CALC, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN,KC_UP, KC_RIGHT,KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case CTL_SFT_T: + if (record->event.pressed) { + return MACRO(D(LCTL), D(LSFT), T(T), END); + } + return MACRO(U(LCTL), U(LSFT), END); + break; + case CTL_SFT_G: + if (record->event.pressed) { + return MACRO(D(LCTL), D(LSFT), T(G), END); + } + return MACRO(U(LCTL), U(LSFT), END); + break; + case CTL_ALT_H: + if (record->event.pressed) { + return MACRO(D(LCTL), D(LALT), T(H), END); + } + return MACRO(U(LCTL), U(LALT), END); + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/josh/readme.md b/keyboards/ergodox/keymaps/josh/readme.md new file mode 100644 index 000000000..cee19d47e --- /dev/null +++ b/keyboards/ergodox/keymaps/josh/readme.md @@ -0,0 +1,8 @@ +Layout is based on the default layout that comes on the ergodox infinity. Focused mostly on making ctl and alt easy to reach. I spend most my day working in Eclipse which has just so many 3 key shortcuts. + +* Removed numpad keys from symbol layer (I don't use them) +* Added arrow keys under h, j, k, l on symbol layer. vi movement keys! +* Added a few macros for eclipse hotkeys that I used all the time +* Added calc button on symbol layer +* tap vs hold on tab and \. Gives alt, ctl and shift on both sides of the keyboard + diff --git a/keyboards/ergodox/keymaps/kastyle/keymap.c b/keyboards/ergodox/keymaps/kastyle/keymap.c new file mode 100644 index 000000000..a92085003 --- /dev/null +++ b/keyboards/ergodox/keymaps/kastyle/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LGUI | | App | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCtrl | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,---------------. ,---------------. + * |Ctrl/Esc| Alt | | Alt |Ctrl/Esc| + * ,------|--------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * |Backsp| Del |------| |------| Enter | Space| + * | | | End | | PgDn | | | + * `----------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + CTL_T(KC_ESC), ALT_T(KC_APP), + KC_HOME, + KC_BSPC,KC_DEL,KC_END, + // right hand + KC_APP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/kines-ish/keymap.c b/keyboards/ergodox/keymaps/kines-ish/keymap.c new file mode 100644 index 000000000..83f5b0e2b --- /dev/null +++ b/keyboards/ergodox/keymaps/kines-ish/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Esc | Grv |Insert| Left | Right| | Up | Down | [ | ] | L2 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Ctrl | Alt | | LGui | Ctrl | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * |Backsp| Del |------| |------| Enter| Space| + * |ace | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_ESC, KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + KC_LCTL,KC_LALT, + KC_HOME, + KC_BSPC,KC_DEL,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN2, + KC_LGUI, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | PrScr | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ScrLk | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Pause | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_PSCR,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_SLCK,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_PAUS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/kines-ish/readme.md b/keyboards/ergodox/keymaps/kines-ish/readme.md new file mode 100644 index 000000000..5d39a0590 --- /dev/null +++ b/keyboards/ergodox/keymaps/kines-ish/readme.md @@ -0,0 +1,19 @@ +This keymap attempts to match the Kinesis Contoured (aka Advantage) default +layout as closely as possible. See +http://www.kinesis-ergo.com/wp-content/uploads/2013/06/advantage_layout_win.pdf + +Apart from the obvious mappings, this keymap also: + +* removes the dual-purpose momentary layer/normal keys: Z, /, and Grv; + because the author--coming from a Kinesis keyboard--finds the delays and + accidental modifiers to be more disconcerting than helpful. + +* puts Esc in the bottom left since there's no place for it in the top + left to match the Kinesis. + +* changes the bottom-right key into an L2 toggle since there's otherwise no + way to get to L2. + +* adds PrScr, ScrLk and Pause to the L1 keymap, down the left side, since + they're present on the Kinesis but not available in the default + ergodox_ez keymap. diff --git a/keyboards/ergodox/keymaps/maz/keymap.c b/keyboards/ergodox/keymaps/maz/keymap.c new file mode 100644 index 000000000..6378f874b --- /dev/null +++ b/keyboards/ergodox/keymaps/maz/keymap.c @@ -0,0 +1,229 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define ARRW 2 // arrow keys +#define MDIA 3 // media keys, including mouse + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | CAPS | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ESC | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | Grv | |*SYMB*|*ARRW*| |*MDIA*|*SYMB*| [ | ] | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | Space| Bksp |------| |------| Tab |Enter | + * | ctrl | gui | Alt | | Alt | gui | ctrl | + * `--------------------' `----------------------' + */ + // TODO: maybe look into changing the delay or whatever for the holding macros... not sure which way you would go with this. if the macro automatically kicks in if you hold it and press another button (no matter how long you held it for), then it wouldn't hurt to have a longer period i think... although if you hold a button and then decide not to, then you;ll register a space/bksp/etc. on accident. on the other hand, if it's too short of a delay, then you might be able to register spc/bksp/etc quickly enough, although i don't see this as big of an issue + // not sure if gui is meta key or super... it says meta on the basic keycodes page, and i think that's consitent with other shit, but you should really figure out how to program the keyboard to have meta and super separately instead of hacking your init.el to recognize alt as meta... because shit will get fucked up beteween awesome and emacs and other shit i'm guessing +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_TRNS, KC_GRV, KC_TRNS,MO(SYMB),MO(ARRW), + KC_TRNS, KC_TRNS, + KC_TRNS, + CTL_T(KC_SPC),GUI_T(KC_BSPC),KC_LALT, + // right hand + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_CAPSLOCK, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(MDIA), MO(SYMB), KC_LBRC,KC_RBRC, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_RALT,GUI_T(KC_TAB), CTL_T(KC_ENT) + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | . | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_DOT, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_TRNS, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Arrow keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | |PGDOWN| PGUP | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| LEFT | DOWN | UP |RIGHT | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | HOME | END | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[ARRW] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_PGDOWN, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 3: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | Lclk | Rclk | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |Mute |VolDn | VolUp| | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | Prev | Play | Next | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * |Brwser| | | | | | | + * |Back | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_WBAK, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/maz/readme.md b/keyboards/ergodox/keymaps/maz/readme.md new file mode 100644 index 000000000..000a8d000 --- /dev/null +++ b/keyboards/ergodox/keymaps/maz/readme.md @@ -0,0 +1,121 @@ +# Introduction + +## Motivation +I created this keymap in an attempt to optimize my typing experience in text editors (vim and emacs) and the command-line. + +More specifically, I wanted to have each modifier key controlled by the thumbs, the most powerful of the digits (I think). This cured me of emacs pinky, which had surprisingly grown quite quickly over the first two weeks of using emacs & emacs-like commands on the command-line. + +## Changes +There are some miscellaneous changes that I kind of forgot I made, such as moving the tilde key, but you can check out the visual layouts below, which I **have** kept up to date. +### Modifier Keys +The biggest changes from the ergodox ez default keymap are the modifiers on the thumb cluster. You must hold each key down for a certain amount of time (forgot where this is specified) in order for the modifier key to activate. + +### Layers +* an arrow layer (ARRW) has been created because the default arrow keys suck. Beware, these do use vim bindings because they're the best. +* the keys in the media layer have been moved around for a better experience (imo), especially with respect to the mouse +* the three layers (SYMB, MDIA, and ARRW) now have their own dedicated keys accessible by the thumbs in the basic layer +* caps lock has been put in place of the right-side `L1` toggle key because there was really no need to have two keys to toggle one layer, and caps lock is useful when writing queries +** unfortunatley, caps lock is not indicated by an LED, so be careful. I use caps lock just like I do insert in vim; for a short burst of text. I always turn off caps lock when I change my focus + +### Removal Of Keys +I also removed a bunch of unnecessary keys that I wasn't going to use anyway. You'll see such keys are blank in the basic layer. I will probably add some more keys in place of these, but I'm fine for now; I just didn't want the distraction of extra keys I barely use. + +## Caveats +### Thumb Cluster Range +I've heard many complaints about the thumb clusters. I agree that the three outter keys are almost impossible to reach. I am going to try to build [Matt Adereth's keyboard](https://github.com/adereth/dactyl-keyboard), which looks to have a better layout. However, I am able to comfortably use the three modifier keys mainly because: +* I use DCS keycaps with SA Row 3 keycaps where the Alt keys are +* I have relatively large hands (I guarantee you there's no problem - I guarantee you) + +### Dangerous positioning +I think it's quite dangerous to put something like control on the same key as enter. Alas, this is a risk I'm willing to accept, and so should you if you decide to use this keymap. I tend to avoid putting myself in situtations in which disaster could occur with one fell swoop of a keypress. + +# Keymap +## Keymap 0: Basic layer +``` +,--------------------------------------------------. ,--------------------------------------------------. +| = | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | - | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | E | R | T | L1 | | CAPS | Y | U | I | O | P | \ | +|--------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| ESC | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | +|--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| +| LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | Grv | |*SYMB*|*ARRW*| |*MDIA*|*SYMB*| [ | ] | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+--------+------. + | | | | | | | | + | Space| Bksp |------| |------| Tab |Enter | + | ctrl | gui | Alt | | Alt | gui | ctrl | + `--------------------' `----------------------' + +``` + +## Keymap 1: Symbol Layer +The only change here is the *dot* (`.`) character moving from next to `0` next to `+` in order to move the layer keys in the correct position +``` + ,--------------------------------------------------. ,--------------------------------------------------. + | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | . | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | 0 | = | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' +``` + +## Keymap 2: Arrow Layer +``` + ,--------------------------------------------------. ,--------------------------------------------------. + | | | | | | | | | | | | | | | | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | | | | | | | | | |PGDOWN| PGUP | | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | |------| |------| LEFT | DOWN | UP |RIGHT | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | | | | | | HOME | END | | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' +``` + +## Keymap 3: Media and mouse keys +``` + ,--------------------------------------------------. ,--------------------------------------------------. + | | | | | | | | | | | | | | | | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | | | MsUp | | | | | | | | | | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | |MsLeft|MsDown|MsRght| |------| |------| | Lclk | Rclk | | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | |Mute |VolDn | VolUp| | | | | | | | | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | Prev | Play | Next | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + |Brwser| | | | | | | + |Back | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' +``` diff --git a/keyboards/ergodox/keymaps/mpiechotka/keymap.c b/keyboards/ergodox/keymaps/mpiechotka/keymap.c new file mode 100644 index 000000000..67aca4479 --- /dev/null +++ b/keyboards/ergodox/keymaps/mpiechotka/keymap.c @@ -0,0 +1,276 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_colemak.h" + +enum { + BASE = 0, + BASE_CM, + SYMB, + MACR +}; + +enum { + LWIN = 1, + PC1, + PC2, + PC3, + PC4, + DL_BASE, + DL_BASE_CM, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0a: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | F | P | G | L1 | | L1 | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| = | | - |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | K | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LAlt | LGui | | LAlt | RAlt | + * ,------|------|------| |------+--------+------. + * | |Backsp| Home | | PgUp | | | + * | Space|ace/ |------| |------| Tab/ |Enter/| + * | /Shft|Ctrl | 1) | | 2) | Ctrl |Shift | + * `--------------------' `----------------------' + * + * 1) End/L1 + * 2) PgDown/L2 + */ +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(SYMB), + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_EQL, + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + KC_LALT, F(LWIN), + KC_HOME, + SFT_T(KC_SPC),CTL_T(KC_BSPC),LT(SYMB, KC_END), + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_MINS, KC_K, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, LT(SYMB,KC_NO), + KC_LALT, KC_RALT, + KC_PGUP, + LT(MACR,KC_PGDN),CTL_T(KC_TAB), SFT_T(KC_ENT) + ), +/* Keymap 0b: Basic layer (Colemak keycodes or QWERTY) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | F | P | G | L1 | | L1 | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc | A | R | S | T | D |------| |------| H | N | E | I | O | ' | + * |--------+------+------+------+------+------| = | | - |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | K | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LAlt | LGui | | LAlt | RAlt | + * ,------|------|------| |------+--------+------. + * | |Backsp| Home | | PgUp | | | + * | Space|ace/ |------| |------| Tab/ |Enter/| + * | /Shft|Ctrl | 1) | | 2) | Ctrl |Shift | + * `--------------------' `----------------------' + * + * 1) End/L1 + * 2) PgDown/L2 + */ +[BASE_CM] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, CM_Q, CM_W, CM_F, CM_P, CM_G, TG(SYMB), + KC_ESC, CM_A, CM_R, CM_S, CM_T, CM_D, + KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, KC_EQL, + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + KC_LALT, F(LWIN), + KC_HOME, + SFT_T(KC_SPC),CTL_T(KC_BSPC),LT(SYMB, KC_END), + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), CM_J, CM_L, CM_U, CM_Y, KC_P, /*CM_SCLN*/ KC_BSLS, + CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT, + KC_MINS, CM_K, CM_M, CM_COMM,CM_DOT, CTL_T(CM_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, LT(SYMB,KC_NO), + KC_LALT, KC_RALT, + KC_PGUP, + LT(MACR,KC_PGDN),CTL_T(KC_TAB), SFT_T(KC_ENT) + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Macros + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | DLa | DLb | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | PC1 | PC2 | PC3 | PC4 | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MACROS +[MACR] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, F(DL_BASE),F(DL_BASE_CM),KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, F(PC1), F(PC2), F(PC3), F(PC4), KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [LWIN] = ACTION_MACRO(LWIN), + [PC1] = ACTION_MACRO(PC1), + [PC2] = ACTION_MACRO(PC2), + [PC3] = ACTION_MACRO(PC3), + [PC4] = ACTION_MACRO(PC4), + [DL_BASE] = ACTION_DEFAULT_LAYER_SET(BASE), + [DL_BASE_CM] = ACTION_DEFAULT_LAYER_SET(BASE_CM) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + case LWIN: + if (record->event.pressed) { + register_code(KC_RSFT); + unregister_code(KC_RSFT); + register_code(KC_LGUI); + } else { + unregister_code(KC_LGUI); + } + break; + case PC1: + if (!record->event.pressed) { + return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(1), W(50), T(ENT), END); + } + break; + case PC2: + if (!record->event.pressed) { + return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(2), W(50), T(ENT), END); + } + break; + case PC3: + if (!record->event.pressed) { + return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(3), W(50), T(ENT), END); + } + break; + case PC4: + if (!record->event.pressed) { + return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(4), W(50), T(ENT), END); + } + break; + } + return MACRO_NONE; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case SYMB: + ergodox_right_led_1_on(); + break; + case MACR: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } +}; diff --git a/keyboards/ergodox/keymaps/mpiechotka/readme.md b/keyboards/ergodox/keymaps/mpiechotka/readme.md new file mode 100644 index 000000000..785400d1d --- /dev/null +++ b/keyboards/ergodox/keymaps/mpiechotka/readme.md @@ -0,0 +1,6 @@ +# ErgoDox EZ mpiechotka Configuration + +Modification of ErgoDox EZ Colemak layout with additional QWERTY/software Colemak layer and change of the special keys. + + + diff --git a/keyboards/ergodox/keymaps/msc/img/code_layer.png b/keyboards/ergodox/keymaps/msc/img/code_layer.png Binary files differnew file mode 100644 index 000000000..7b5efaae7 --- /dev/null +++ b/keyboards/ergodox/keymaps/msc/img/code_layer.png diff --git a/keyboards/ergodox/keymaps/msc/img/main_layer.png b/keyboards/ergodox/keymaps/msc/img/main_layer.png Binary files differnew file mode 100644 index 000000000..65f92dda1 --- /dev/null +++ b/keyboards/ergodox/keymaps/msc/img/main_layer.png diff --git a/keyboards/ergodox/keymaps/msc/img/media_layer.png b/keyboards/ergodox/keymaps/msc/img/media_layer.png Binary files differnew file mode 100644 index 000000000..a69799b07 --- /dev/null +++ b/keyboards/ergodox/keymaps/msc/img/media_layer.png diff --git a/keyboards/ergodox/keymaps/msc/keymap.c b/keyboards/ergodox/keymaps/msc/keymap.c new file mode 100644 index 000000000..c43aecf6b --- /dev/null +++ b/keyboards/ergodox/keymaps/msc/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L | ; |' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Cmd | Alt |AltShf| Left | Right| | Left | Down | Up |Right | L2 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LGUI,KC_LALT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN,GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, TG(MDIA), + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | Mute | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | Prev |VolDn |VolUp | Next | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | Lclk | Rclk |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/msc/readme.md b/keyboards/ergodox/keymaps/msc/readme.md new file mode 100644 index 000000000..0d14fcbd2 --- /dev/null +++ b/keyboards/ergodox/keymaps/msc/readme.md @@ -0,0 +1,32 @@ +# MSC Configuration + +### Based mostly on the ErgoDox EZ default layout with optimizations for coding on osx. + +#### Expecting the user to rely on Coder Layer this keymap removes some of the duplicate symbol keys in the lower portions of the board and replaces them with arrow keys and modifiers. The Media Layer is also updated to match the change in the arrow keys and the left and right click buttons are moved under the thumb position. The Media layer is now reached with toggle button in the lower right. + +### Main Layer + + + +### Code Layer + + + +### Media Layer + + + +## Changelog + +Version 1.0 + +- Changed the temp code layer key in the bottom right to toggle media layer +- Changed the temp media key to only be ";" +- Changed right hand bottom row to match vim home row nav directions +- Changed media keys to match arrow key changes +- Changed media left and right click to spacebar and backspace locations +- Changed bottom left to Cmd +- Changed single quote on left bottom row to alt + +#### Coming Soon: +- A new layer for Blender editing with a focus on left hand shortcut and a righthand num pad to control the view in Blender. diff --git a/keyboards/ergodox/keymaps/naps62/keymap.c b/keyboards/ergodox/keymaps/naps62/keymap.c new file mode 100644 index 000000000..9064053fc --- /dev/null +++ b/keyboards/ergodox/keymaps/naps62/keymap.c @@ -0,0 +1,187 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 ! | 2 @ | 3 # | 4 $ | 5 % | Lang | | Esc | 6 ^ | 7 & | 8 * | 9 ( | 0 ) | Bckspc | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L2 | | L2 | Y | U | I | O | P | \ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Ctrl | A | S | D | F | G |------| |------| H | J | K | L | ; : | ' " | + * |--------+------+------+------+------+------| L1 | | L1 |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , < | . > | / ? | - _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | L1 | ` ~ | ' " | \ | | L2 | | { | } | [ { | ] } | L1 | + * `----------------------------------' `----------------------------------' + * ,--------------. ,---------------. + * | Home | End | | PgUp |Insert | + * ,------|-------|------| |-------+-------+------. + * | | | LGui | | Del | | | + * | Space| Alt |------| |-------| Enter |Space | + * | | | LGui | | Bcsp | | | + * `---------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(KC_SPC), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(2), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), + MO(1), KC_GRV, KC_QUOT, KC_BSLS, MO(2), + + KC_HOME, KC_END, + KC_LGUI, + KC_SPC, KC_LALT, KC_LGUI, + + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + MO(2), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS, + KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, MO(1), + + KC_PGUP, KC_INS, + KC_DEL, + KC_BSPC, KC_ENT, KC_SPC +), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | = | . | 0 | - | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_EQL,KC_DOT, KC_0, KC_MINS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | |GuiUp | Expl | | Term | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |GuiLft|GuiDwn|GuiRgt| | |------| |------| Left | Down | Up |Right | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | |Browsr| | | | |VolDwn|VolUp | Mute | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | | Play | Prev | Next | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Fwd |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, LGUI(KC_W), LGUI(KC_E), KC_BTN1, LGUI(KC_T), KC_TRNS, + KC_TRNS, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), KC_MS_D, KC_MS_R, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, + KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/naps62/readme.md b/keyboards/ergodox/keymaps/naps62/readme.md new file mode 100644 index 000000000..14728e4cc --- /dev/null +++ b/keyboards/ergodox/keymaps/naps62/readme.md @@ -0,0 +1,29 @@ +# ErgoDox EZ naps62 Configuration + +## Motivation + +I wanted a layout that suited my Linux & Vim usage. I also didn't like the lack of efficient access to some of the more common special characters used in programming. + +## Key features / changes + +### Base Layer (L1) + +* **No `MT(mod, kc)` keys (modifier when pressed, key when tapped).** Those keys work with a global timeout. When a key press is shorter than the timeout, it's considered a tap, otherwise it's a hold. I couldn't find any particular timeout that would work for me. I need to use mods extremely fast, but also want the confort of using them more slowly in other occasions. So I gave up on this feature altogether. +* **Direct access to `{}[]`.** When programming, these are used extremely often. I was still getting used to the coder layer, and I prefer the arrows on the home row, so I used the bottom-right keys for this. +* **Layer keys everywhere.** I either use my little finger or my index finger to go to L1, whichever is more confortable in any given situation. L2 is not used while coding/writing, so I don't need an extremely-optimized access to it. +* **Lang key.** This is nothing more than `Super-Space` combo, which in my systems (both Linux & Windows) is the shortcut to change the keyboard language. I'm Portuguese, so I often cycle between US layout for coding, and PT layout for writing. +* **Special chars on the right-most column.** I only use Ctrl & Shift keys on the left side, so I used the right keys to include some of the more useful special characters as well. + +### Coder Layer (L2) + +* The `=` and `-` signs where nowhere to be found. `-` was already on the base layer, but it's still useful to have a fully-featured NumPad on the coder layer. + +### Media Layer (L3) + +* **Better media keys**. Why was Play/Pause so far away? And where was Mute? I put all my media keys close to each other, including the missing ones +* **Arrow keys on home row.** I use vim, so I'm always on my home row. I use this sometimes to get around, but not as often as to need them on the base row. I'm fine with them here +* I don't use mouse keys. They're still set up, and I made some changes as an experiment, but I mostly forgot they exist by now. + +## Author + +[Miguel Palhas](https://github.com/naps62) diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c new file mode 100644 index 000000000..bf0574ea2 --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -0,0 +1,454 @@ +#include "ergodox.h" +#include "led.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "mousekey.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols layer +#define MDIA 2 // media layer +#define SPEC 3 // special layer + +#define LCaps 10 // left caps-shift key +#define LSymb 11 // left symbol-shift key +#define LMdia 12 // left media-shift key +#define LSpec 13 // left special-shift key +#define RCaps 14 // right caps-shift key +#define RSymb 15 // right symbol-shift key +#define RMdia 16 // right media-shift key +#define RSpec 17 // right special-shift key + +#define MUL 20 // mouse up left +#define MUR 21 // mouse up right +#define MDL 22 // mouse down left +#define MDR 23 // mouse down right + +/* + * The Ordinary Layout for the Ergodox EZ keyboard, v4 + * + * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com + * + * No rights reserved. This software is in the public domain. + * Credit me if you are friendly but if you're a jerk don't bother. + * + * Details: readme.md + * https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/******* Base Layer ******************************************************************************************************** + * + * ,------------------------------------------------------. ,------------------------------------------------------. + * | Special `~ | 1 | 2 | 3 | 4 | 5 | ESC | | - | 6 | 7 | 8 | 9 | 0 | =+ Special | + * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| + * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | + * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| + * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | + * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| + * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | + * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Home | End | | Left | Right| + * ,------|------|------| |------+------+------. + * | | | PgUp | | Up | | | + * |Backsp| Del |------| |------| Enter| Space| + * | | | PgDn | | Down | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// left hand + F(LSpec),KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC +,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G +,M(LCaps) ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) +,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI + ,KC_HOME,KC_END + ,KC_PGUP + ,KC_BSPC,KC_DEL ,KC_PGDN + // right hand + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,M(RCaps) + ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_DOWN ,KC_ENT ,KC_SPC + ), + +/******* Symbols Layer ***************************************************************************************************** + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | + * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| + * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | LCtrl | Meh |Hyper | LAlt | LGui | |RGui/0|RAlt/.|Hypr/=|Meh/+ |RCtrl/Ent| + * `-----------------------------------' `-------------------------------------' + * ,-------------. ,-------------. + * | Left | Right| | Home | End | + * ,------|------|------| |------+------+------. + * | | | Up | | PgUp | | | + * |Space |Enter |------| |------|BackSp| Del | + * | | | Down | | PgDn | | | + * `--------------------' `--------------------' + */ +[SYMB] = KEYMAP( +// left hand + KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC +,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) +,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV +,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB +,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT ,KC_LGUI + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_SPC ,KC_ENT ,KC_DOWN + // right hand + ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS + ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS + ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS + ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS + ,GUI_T(KC_0),ALT_T(KC_DOT),ALL_T(KC_EQL),MEH_T(KC_PLUS),CTL_T(KC_ENT) + ,KC_HOME ,KC_END + ,KC_PGUP + ,KC_PGDN ,KC_BSPC ,KC_DEL +), + +/******* Media Layer ******************************************************************************************************* + * + * ,---------------------------------------------------------------. ,---------------------------------------------------------------. + * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | + * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| + * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | + * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| + * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | + * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| + * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | + * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' + * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| + * `---------------------------------------------' `---------------------------------------------' + * ,-------------. ,-------------. + * | Stop |Refrsh| | Prev | Next | + * ,------|------|------| |------+------+------. + * |Brwser|Brwser|Search| |VolUp | | | + * |Back | Fwd |------| |------| Stop | Play-| + * | | | Home | |VolDn | | Pause| + * `--------------------' `--------------------' + */ +[MDIA] = KEYMAP( +// left hand + KC_TRNS ,KC_F11 ,KC_F12 ,KC_F13 ,KC_F14 ,KC_F15 ,KC_ESC +,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U +,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD +,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D +,KC_LCTL ,KC_MEH ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 + ,KC_WSTP ,KC_WREF + ,KC_WSCH + ,KC_WBAK ,KC_NO ,KC_WHOM + // right hand + ,KC_NO ,KC_F16 ,KC_F17 ,KC_F18 ,KC_F19 ,KC_F20 ,KC_TRNS + ,KC_WH_U ,KC_PSCR ,KC_HOME ,KC_UP ,KC_PGUP ,KC_MAIL ,KC_TRNS + ,KC_NLCK ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_MYCM ,KC_TRNS + ,KC_WH_D ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_TRNS + ,GUI_T(KC_INS),ALT_T(KC_DEL),KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_MPRV ,KC_MNXT + ,KC_VOLU + ,KC_VOLD ,KC_MSTP ,KC_MPLY +), + +/******* Special Layer ***************************************************************************************************** + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | Esc | | | | | | | | | | | | Bspc | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | RShift | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[SPEC] = KEYMAP( +// left hand + KC_TRNS ,KC_ESC ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS,KC_TRNS ,KC_TRNS + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_BSPC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_RSFT + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + // the faux shift keys are implemented as macro taps + [LCaps] = ACTION_MACRO_TAP(LCaps) + ,[LSymb] = ACTION_MACRO_TAP(LSymb) + ,[LMdia] = ACTION_MACRO_TAP(LMdia) + ,[LSpec] = ACTION_MACRO_TAP(LSpec) + ,[RCaps] = ACTION_MACRO_TAP(RCaps) + ,[RSymb] = ACTION_MACRO_TAP(RSymb) + ,[RMdia] = ACTION_MACRO_TAP(RMdia) + ,[RSpec] = ACTION_MACRO_TAP(RSpec) +}; + +uint16_t caps_shift = 0; +uint16_t symb_shift = 0; +uint16_t mdia_shift = 0; + +bool symb_lock = false; +bool mdia_lock = false; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + // There are two shift keys for each layer so we increment a layer_shift var when one + // is pressed and decrement when one is released. If both are pressed at the same time + // then the layer is locked (or unlocked). The shift counts are bound between 0 and 2 + // only because sometimes rapid pressing led to irregular events; this way the states + // are self healing during use. + + case LCaps: // both caps-shift keys trigger Left Shift + case RCaps: // so they don't interfere with the magic combo + if (record->event.pressed && !record->tap.count) { + if(++caps_shift > 2) caps_shift = 2; + if(caps_shift == 2) { + register_code(KC_CAPS); + unregister_code(KC_CAPS); + } else if(caps_shift == 1) { + register_code(KC_LSFT); + } + } else { + if(--caps_shift < 0) caps_shift = 0; + if(caps_shift == 0) unregister_code(KC_LSFT); + } + break; + + case LSymb: + if (record->event.pressed) { + if(++symb_shift > 2) symb_shift = 2; + if(symb_shift == 2) { + symb_lock = !symb_lock; + } else if(symb_shift == 1) { + layer_on(SYMB); + } + } else { + if(--symb_shift < 0) symb_shift = 0; + if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB); + } + break; + + case LMdia: + if (record->event.pressed) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + register_code(KC_TAB); + } else { + if(++mdia_shift > 2) mdia_shift = 2; + if(mdia_shift == 2) { + mdia_lock = !mdia_lock; + } else if(mdia_shift == 1) { + layer_on(MDIA); + } + } + } else { + if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + unregister_code(KC_TAB); + } else { + if(--mdia_shift < 0) mdia_shift = 0; + if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); + } + } + break; + + case LSpec: + if (record->event.pressed) { + if (record->tap.count && !record->tap.interrupted) { + register_code(KC_GRV); + } else { + layer_on(SPEC); + } + } else { + if(record->tap.count && !record->tap.interrupted) { + unregister_code(KC_GRV); + } else { + layer_off(SPEC); + } + } + break; + + case RSymb: + if (record->event.pressed) { + if (record->tap.count && (!symb_shift) && (!symb_lock)) { + register_code(KC_QUOT); + } else { + if(++symb_shift > 2) symb_shift = 2; + if(symb_shift == 2) { + symb_lock = !symb_lock; + } else if(symb_shift == 1) { + layer_on(SYMB); + } + } + } else { + if(record->tap.count && symb_shift == 0) { + unregister_code(KC_QUOT); + } else { + if(--symb_shift < 0) symb_shift = 0; + if((!symb_shift) && (!symb_lock)) layer_off(SYMB); + } + } + break; + + case RMdia: + if (record->event.pressed) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + register_code(KC_BSLS); + } else { + if(++mdia_shift > 2) mdia_shift = 2; + if(mdia_shift == 2) { + mdia_lock = !mdia_lock; + } else if(mdia_shift == 1) { + layer_on(MDIA); + } + } + } else { + if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + unregister_code(KC_BSLS); + } else { + if(--mdia_shift < 0) mdia_shift = 0; + if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); + } + } + break; + + case RSpec: + if (record->event.pressed) { + if (record->tap.count && !record->tap.interrupted) { + register_code(KC_EQL); + } else { + layer_on(SPEC); + } + } else { + if(record->tap.count && !record->tap.interrupted) { + unregister_code(KC_EQL); + } else { + layer_off(SPEC); + } + } + break; + + // mouse diagonals + + case MUL: // mouse up left + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + mousekey_send(); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + mousekey_send(); + } + break; + + case MUR: // mouse up right + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + mousekey_send(); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + mousekey_send(); + } + break; + + case MDL: // mouse down left + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + mousekey_send(); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + mousekey_send(); + } + break; + + case MDR: // mouse down right + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + mousekey_send(); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + mousekey_send(); + } + break; + + default: + // none + break; + } + + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + // shift or caps lock turns on red light + if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { + ergodox_right_led_1_on(); + } else { + ergodox_right_led_1_off(); + } + + // Symbol layer turns on green light + if(layer_state & (1UL<<SYMB)) { + ergodox_right_led_2_on(); + } else { + ergodox_right_led_2_off(); + } + + // Media layer turns on blue light + if(layer_state & (1UL<<MDIA)) { + ergodox_right_led_3_on(); + } else { + ergodox_right_led_3_off(); + } +}; + diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png Binary files differnew file mode 100644 index 000000000..9c561a10a --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt new file mode 100644 index 000000000..25731ea2e --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt @@ -0,0 +1,27 @@ +[{x:3.5},"#\n3",{x:10.5},"*\n8"], +[{y:-0.875,x:2.5},"@\n2",{x:1},"$\n4",{x:8.5},"&\n7",{x:1},"(\n9"], +[{y:-0.875,x:5.5},"%\n5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc"},"_\n\n\n\n\n\n-","^\n6"], +[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#2277ff",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc"},"E",{x:10.5},"I"], +[{y:-0.875,x:2.5},"W",{x:1},"R",{x:8.5},"U",{x:1},"O"], +[{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"], +[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc"},"Q",{x:14.5},"P",{c:"#2277ff",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc"},"D",{x:10.5},"K"], +[{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"], +[{y:-0.875,x:5.5},"G",{x:6.5},"H"], +[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc"},"A",{x:14.5},":\n;",{c:"#2277ff",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#54d6de",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], +[{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"], +[{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."], +[{y:-0.875,x:5.5},"B",{x:6.5},"N"], +[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc"},"Z",{x:14.5},"?\n/",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"], +[{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"], +[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Home","End"], +[{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"], +[{x:2},"Page\n\n\n\n\n\nDown"], +[{r:-30,rx:13,y:-1,x:-3},"Left","Right"], +[{x:-3},"Up",{h:2},"Enter",{h:2},"Space"], +[{x:-3},"Down"] + diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png Binary files differnew file mode 100644 index 000000000..99e5ed80b --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt new file mode 100644 index 000000000..4eccc9f35 --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt @@ -0,0 +1,27 @@ +[{x:3.5,c:"#99de2a"},"F13",{x:10.5},"F18"], +[{y:-0.875,x:2.5},"F12",{x:1},"F14",{x:8.5},"F17",{x:1},"F19"], +[{y:-0.875,x:5.5},"F15",{c:"#ff4444"},"Esc",{x:4.5,c:"#737373",a:7},"",{c:"#99de2a",a:4},"F16"], +[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#ffb063"},"Home",{x:1},"Page\n\n\n\n\n\nUp"], +[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#e6e067"},"Print\n\n\n\n\n\nScreen"], +[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#e6e067",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#ff0000",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#ff8500",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"], +[{y:-0.875,x:5.5,c:"#e6e067"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"], +[{y:-0.875,c:"#2277ff",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#e6e067"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#2277ff",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ffb063",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"], +[{y:-0.75,x:3.5,c:"#ff8500"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"], +[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#ffb063"},"End",{x:1},"Page\n\n\n\n\n\nDown"], +[{y:-0.875,x:5.5,c:"#e6e067"},"Mute",{x:6.5,c:"#737373",a:7},""], +[{y:-0.875,c:"#2277ff",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",a:7},"",{x:14.5},"",{c:"#2277ff",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#ff8500"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#ffb063",fa:[0,0,0,1]},"Delete\n\n\nOption"], +[{y:-0.875,x:2.5,c:"#ff8500"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#ffb063"},"Insert\n\n\nCmd",{x:1,c:"#77aaff"},"Hyper"], +[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ccbb00"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], +[{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"], +[{x:2},"Home\n\n\nBrowser"], +[{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"], +[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nUp",{c:"#ccbb00",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"], +[{x:-3,c:"#e6e067"},"Vol\n\n\n\n\n\nDown"] + diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.png b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png Binary files differnew file mode 100644 index 000000000..6eecf447e --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt new file mode 100644 index 000000000..a08827c6d --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-special.txt @@ -0,0 +1,27 @@ +[{x:3.5,a:7},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], +[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], +[{y:-0.375,x:3.5},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{x:6.5},""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], +[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""], +[{y:-0.75,x:3.5},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{x:6.5},""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"], +[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.75,x:0.5},"","",{x:14.5},"",""], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""], +[{h:2},"",{h:2},"",""], +[{x:2},""], +[{r:-30,rx:13,y:-1,x:-3},"",""], +[{x:-3},"",{h:2},"",{h:2},""], +[{x:-3},""] + diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png Binary files differnew file mode 100644 index 000000000..e4de64a96 --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt new file mode 100644 index 000000000..e199f5c59 --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt @@ -0,0 +1,27 @@ +[{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"], +[{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"], +[{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"], +[{y:-0.875,c:"#2277ff",w:1.5},"Special\n\n\n\n\n\nShift",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#2277ff",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"], +[{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"], +[{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"], +[{y:-0.875,c:"#2277ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb"},"!",{x:14.5,c:"#89b087"},"/",{c:"#2277ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#bbddbb"},"(",{x:10.5,c:"#89b087"},"5"], +[{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], +[{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], +[{y:-0.875,c:"#000000",t:"#ff0000",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#54d6de",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], +[{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], +[{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], +[{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], +[{y:-0.875,c:"#2277ff",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb"},"%",{x:14.5,c:"#89b087"},"-",{c:"#2277ff",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#77aaff"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},".\n\n\nOption"], +[{y:-0.875,x:2.5,c:"#77aaff"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0\n\n\nCmd",{x:1},"=\n\n\nHyper"], +[{y:-0.75,x:0.5,c:"#77aaff"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+\n\n\nMeh","Enter\n\n\nCtrl"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#54d6de"},"Left","Right"], +[{h:2},"Space",{h:2},"Enter","Up"], +[{x:2},"Down"], +[{r:-30,rx:13,y:-1,x:-3},"Home","End"], +[{x:-3},"Page\n\n\n\n\n\nUp",{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete"], +[{x:-3},"Page\n\n\n\n\n\nDown"] + diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md new file mode 100644 index 000000000..6465cd79e --- /dev/null +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -0,0 +1,103 @@ +# The Ordinary Layout, a familiar and powerful layout # + +The Ordinary Layout is intended to be unremarkably mundane and remarkably useful. This layout maintains most key positions from common QWERTY keyboards, and it features enhanced Symbol and Media layers compared to the default Ergodox EZ layout. + +The Ordinary Layout is supposed to look mostly like a normal keyboard, except in the ways that the Ergodox key arrangement is unique. The thumbs are responsible for space, enter, plus both forward and backward delete; with only a couple exceptions, all other keys are in the same place they are found on traditional keyboards. + +Nicholas Keene +ordinarylayout@nicholaskeene.com +no rights reserved, use for any purposes, credit me if you are a nice person + +## The Base Layout ## + +* The light blue keys are modifiers: traditional Control, Option, and Command keys, plus Hyper and Meh +* The dark blue keys are Shift keys: Capitals Shift (traditional shift), Symbol Shift, and Media Shift; plus a Shift Lock key +* Several dark blue keys double for entry of characters which would typically be in those locations +* The turquoise keys are text navigation and manipulation +* The red keys is Escape and it is always found in that location no matter what + + + +This layout puts the modifier keys along the bottom of the keyboard where they are on most keyboards. They are in the regular order, with the addition of Hyper and Meh keys. The modifier keys are all in the same place on all layers, although some layers also assign symbols on those buttons. On the outside edges are the Shift keys. The traditional shift key is called Capitals Shift and it is in the normal location. Above that are Symbols Shift and Media Shift. Each Shift key momentarily switches the layout to that layer, and if you use the Shift Lock button you can lock the layout to that layer. + +Touch typists will also find tilde, tab, equals/plus, slash/pipe, and quote/double-quote sharing space on those Shift keys where they would probably be on a common keyboard. Other than the turquoise keys the only buttons which move to new locations are the Brackets and Dash and Escape. Most touch typists dont touch-type brackets or dash anyway so only Escape really requires retraining of muscle memory, and see below for the Special Escape Sequence. + +The four big turquoise keys are arranged differently than in the default Ergodox EZ layout. The Ordinary Layout here copies the design of the old Fingerworks TouchStream keyboard, but also reflects the natural presumptions of the author -- me! I type the space character with my right hand, and to me it makes sense for the two delete keys to be next to one another. + +The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. + +## The Symbols Layer ## + +* The light green keys are the eponymous symbols +* The bright green keys are F-Keys +* The dark green keys constitute a number pad +* The turquoise keys are the *reverse* of the turquoise keys on the base layer + + + +The Ergodox EZ ships with the "Coder Layer" which I like to call the Symbols layer. There are some significant improvements in The Ordinary Layout over the default layout. + +The symbol keys are mostly the same as on the default layout, which did a good job in this regard, but with a few enhancements: + +* Angle brackets on this layer mean that curly, square, and angle brackets are all available on different layers of the same two buttons. Also, they mean that all kinds of brackets, including parentheses, are available on both the Base and Symbols layers. +* The slash, backslash, and pipe characters are grouped together as a memory aid. +* The & and | symbols are juxtaposed as a memory aid + +The number pad area here, in green, includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads, because this layout does not use a Num Lock key to switch the buttons between numeric keycodes and navigational keycodes. See the explanation in The Media Layout section about navigation using these same buttons. + +Finally, consider the turquoise text-nav keys. Here in the Symbols layer, these are *reversed* from the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. + +## The Media Layer ## + +* The dark orange keys on the left move the mouse cursor +* The dark orange keys on the right move the text cursor +* The light orange keys are for scrolling and paging +* The bright green keys are more F-keys +* The dark yellow keys signal Web and Audio applications +* The light yellow keys signal the operating system +* The dark gray keys do nothing in case you bump them by accident + + + +This layer was inspired by the Media layer on the Ergodox EZ but takes it farther. The Fingerworks TouchStream keyboard had a very useful feature for controlling the text cursor easily and this layer does something similar. The left hand can move the mouse, the right hand moves the text cursor, in all four directions, in small or large increments. This greatly enhances navigation in text documents. + +Moreover, the orange keys on the right overlay the numberpad from the Symbols Layer, such that in the Media Layer the same keys can be used as if they were a number pad in navigational mode (Num Lock off). For instance, in traditional number pads the '3' key became 'Page Down', and so it is here. This means a user can do text navigation without moving either hand. + +Alas, the yellow keys have at best spotty success with common software. Good luck with those but don't expect too much. + +## Switching Between Layers ## + +In addition to Symbols and Media there is the Capitals layer which is exactly the same as pressing the shift key. Each layer is accessed by a shift key on each edge of the keyboard and corresponds to one of the three LEDs on the keyboard: Capitals (red), Symbols (green), Media (blue). The color of a layer illuminates when the layer is active. + +Shift buttons work in the expected way: press them and all of the keys switch to that layer; release them and the keys switch back to the base layer. If you press both of a pair of shift keys, the layer will lock on until you press both shift keys again. For instance, the widely and rightly loathed Caps Lock is engaged by pressing both Capitals Shift buttons. All the Shift keys work this way. + +Multiple layers can be turned on at once. The Capitals layer will affect characters on other layers to capitalize. Other layers, however, don't 'mix': Symbols blankets the base layout; Media blankets Symbols. + +## Special Sequences ## + + + +### Escape ### + +The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, whnich is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. + +The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. + +### Backspace ### + +At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence, using the 0 key, to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. + +### RShift ### + +The Ordinary Layout locks layers by pressing both of a pair of shift keys. This interferes with the QMK firmware magic sequence, which is LShift+RShift. To work around this, both of the Capitals Shift keys produce a *Left Shift* keystroke. If for some reason a person needs *Right Shift* they can find it by pressing a Special Shift key, then the Capitals Shift key on the right side of the keyboard. + +**** + +The Ordinary Layout for the Ergodox EZ keyboard, v4 + +Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com + +No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother. + +Details: readme.md + https://github.com/nrrkeene/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/ordinary diff --git a/keyboards/ergodox/keymaps/osx_de/keymap.c b/keyboards/ergodox/keymaps/osx_de/keymap.c new file mode 100644 index 000000000..e3b9e11f4 --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de/keymap.c @@ -0,0 +1,364 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german_osx.h" + +#define BASE 0 +#define SYMB 1 +#define MDIA 2 +#define SMLY 3 +#define NUMB 4 +#define EGOS 5 + +#define M_CTRL_CMDV 0 +#define M_CTRL_CMDC 1 +#define M_MEH_SH_ACUT 2 +#define M_LGUI_SHFT 3 +#define M_CTL_SFT_HASH 4 +#define M_DE_OSX_CIRC_CTRLCMD 5 +#define M_DE_OSX_PLUS_CTRLALT 6 +#define SM_SMILE 7 +#define SM_SMIRK 8 +#define SM_CRY 9 +#define SM_SAD 10 +#define SM_HEART 11 +#define SM_LAUGH 12 +#define SM_KISS 13 +#define SM_FROWN 14 +#define M_TOGGLE_5 15 + +//Layout keymap.c generated with ErgodoxLayoutGenerator V1.0BETA1 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[BASE]=KEYMAP( +//left half + KC_ESC, DE_OSX_1, DE_OSX_2, DE_OSX_3, DE_OSX_4, DE_OSX_5, M(M_CTL_SFT_HASH), + KC_TAB, DE_OSX_Q, DE_OSX_W, DE_OSX_E, DE_OSX_R, DE_OSX_T, KC_LGUI, + KC_LALT, DE_OSX_A, DE_OSX_S, DE_OSX_D, DE_OSX_F, DE_OSX_G, + KC_LSFT, CTL_T(DE_OSX_Y), DE_OSX_X, DE_OSX_C, DE_OSX_V, DE_OSX_B, KC_LALT, + LT(SYMB,DE_OSX_LESS), M(M_DE_OSX_CIRC_CTRLCMD), M(M_DE_OSX_PLUS_CTRLALT), KC_UP, KC_DOWN, + M(M_MEH_SH_ACUT), TG(MDIA), + KC_HOME, + KC_BSPC, KC_DEL, LT(SMLY,KC_END), + //right half + M(M_CTL_SFT_HASH), DE_OSX_6, DE_OSX_7, DE_OSX_8, DE_OSX_9, DE_OSX_0, DE_OSX_SS, + KC_RGUI, DE_OSX_Z, DE_OSX_U, DE_OSX_I, DE_OSX_O, DE_OSX_P, DE_OSX_UE, + DE_OSX_H, DE_OSX_J, DE_OSX_K, DE_OSX_L, DE_OSX_OE, ALT_T(DE_OSX_AE), + KC_RALT, DE_OSX_N, DE_OSX_M, DE_OSX_COMM, DE_OSX_DOT, CTL_T(DE_OSX_MINS), KC_RSFT, + KC_LEFT, KC_RIGHT, LGUI(KC_LSFT), LALT(KC_LSFT), LT(SYMB,DE_OSX_PLUS), + TG(NUMB), ALL_T(DE_OSX_ACUT), + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC), +[SYMB]=KEYMAP( +//left half + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, DE_OSX_LESS, DE_OSX_MORE, DE_OSX_EXLM, DE_OSX_QST, KC_TRNS, KC_TRNS, + KC_TRNS, DE_OSX_HASH, DE_OSX_DLR, DE_OSX_BSLS, DE_OSX_SLSH, KC_DOT, + KC_TRNS, KC_TRNS, DE_OSX_LESS, DE_OSX_PERC, DE_OSX_PIPE, DE_OSX_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_DEL, KC_TRNS, + //right half + M(M_TOGGLE_5), KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, LALT(LSFT(KC_7)), LALT(KC_5), LALT(KC_6), DE_OSX_LESS, DE_OSX_MORE, DE_OSX_EXLM, + DE_OSX_SLSH, DE_OSX_LPRN, DE_OSX_RPRN, LALT(KC_8), LALT(KC_9), DE_OSX_HASH, + KC_TRNS, DE_OSX_PIPE, DE_OSX_TILD, DE_OSX_CIRC, KC_UP, DE_OSX_MINS, LSFT(KC_4), + DE_OSX_QUOT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, + KC_F13, KC_F12, + KC_F14, + KC_F15, KC_TRNS, KC_TRNS), +[MDIA]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, + KC_TRNS, KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, KC_TRNS, KC_MPRV, KC_MNXT, KC_UP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK), +[SMLY]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + M(SM_SMILE), M(SM_SMIRK), M(SM_LAUGH), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(SM_FROWN), M(SM_SAD), M(SM_CRY), KC_TRNS, KC_TRNS, KC_TRNS, + M(SM_HEART), M(SM_KISS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +[NUMB]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, LSFT(KC_RBRC), KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_RBRC, DE_OSX_MINS, + KC_TRNS, LSFT(KC_6), KC_1, KC_2, KC_3, LSFT(KC_7), KC_TRNS, + KC_0, KC_DOT, KC_COMM, DE_OSX_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +[EGOS]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F1, KC_F2, + KC_F3, + KC_SPC, KC_LCTL, KC_F4, + //right half + M(M_TOGGLE_5), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +static uint16_t start; +switch(id) { +case M_TOGGLE_5: +//Macro: M_TOGGLE_5//----------------------- + if (record->event.pressed){ + layer_state ^= (1<<5); + layer_state &= (1<<5); + } + +break; +case M_CTRL_CMDC: +//Macro: M_CTRL_CMDC//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),END); + } else { + return MACRO(U(LCTRL),D(LGUI),T(C),U(LGUI),END); + } + } + +break; +case M_DE_OSX_PLUS_CTRLALT: +//Macro: M_DE_OSX_PLUS_CTRLALT//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),D(LALT),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LALT),END); + } else { + return MACRO(U(LCTRL),U(LALT),T(RBRC),END); + } + } + +break; +case SM_KISS: +//Macro: SM_KISS//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(DOT),U(LSFT),T(SLSH),D(LSFT),T(RBRC),U(LSFT),END); + } + +break; +case SM_FROWN: +//Macro: SM_FROWN//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(DOT),U(LSFT),T(SLSH),D(LALT),T(8),U(LALT),END); + } + +break; +case SM_CRY: +//Macro: SM_CRY//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(COMM),U(LSFT),T(SLSH),D(LSFT),T(8),U(LSFT),END); + } + +break; +case SM_SMILE: +//Macro: SM_SMILE//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(DOT),U(LSFT),T(SLSH),D(LSFT),T(9),U(LSFT),END); + } + +break; +case SM_SMIRK: +//Macro: SM_SMIRK//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(COMM),U(LSFT),T(SLSH),D(LSFT),T(9),U(LSFT),END); + } + +break; +case M_LGUI_SHFT: +//Macro: M_LGUI_SHFT//----------------------- +if (record->event.pressed){ + return MACRO(D(LGUI),D(LSFT),END); + }else{ + return MACRO(U(LGUI),U(LSFT),END); + } + +break; +case SM_HEART: +//Macro: SM_HEART//----------------------- +if (record->event.pressed) { + return MACRO(T(GRV),T(3),END); + } + +break; +case SM_LAUGH: +//Macro: SM_LAUGH//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(DOT),U(LSFT),T(SLSH),D(LSFT),T(D),U(LSFT),END); + } + +break; +case M_CTL_SFT_HASH: +//Macro: M_CTL_SFT_HASH//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),D(LSFT),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LSFT),END); + } else { + return MACRO(U(LCTRL),U(LSFT),T(BSLS),END); + } + } + +break; +case SM_SAD: +//Macro: SM_SAD//----------------------- +if (record->event.pressed) { + return MACRO(D(LSFT),T(DOT),U(LSFT),T(SLSH),D(LSFT),T(8),U(LSFT),END); + } + +break; +case M_DE_OSX_CIRC_CTRLCMD: +//Macro: M_DE_OSX_CIRC_CTRLCMD//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),D(LGUI),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LGUI),END); + } else { + return MACRO(U(LCTRL),U(LGUI),T(NUBS),END); + } + } + +break; +case M_CTRL_CMDV: +//Macro: M_CTRL_CMDV//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),END); + } else { + return MACRO(U(LCTRL),D(LGUI),T(V),U(LGUI),END); + } + } + +break; +case M_MEH_SH_ACUT: +//Macro: M_MEH_SH_ACUT//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(D(LCTRL),D(LSFT),D(LALT),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LSFT),U(LALT),END); + } else { + return MACRO(U(LCTRL),U(LALT),T(EQL),U(LSFT),END); + } + } + +break; +} +return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + +uint8_t layer = biton32(layer_state); + +ergodox_board_led_off(); +ergodox_right_led_1_off(); +ergodox_right_led_2_off(); +ergodox_right_led_3_off(); +switch (layer) { + + case SYMB: + ergodox_right_led_1_on(); + + + break; + case MDIA: + + ergodox_right_led_2_on(); + + break; + case SMLY: + + + ergodox_right_led_3_on(); + break; + case NUMB: + ergodox_right_led_1_on(); + + ergodox_right_led_3_on(); + break; + case EGOS: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; +default: +// none +break; +} + +}; + diff --git a/keyboards/ergodox/keymaps/osx_de/osx_de_highres.png b/keyboards/ergodox/keymaps/osx_de/osx_de_highres.png Binary files differnew file mode 100644 index 000000000..d442a992c --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de/osx_de_highres.png diff --git a/keyboards/ergodox/keymaps/osx_de/readme.md b/keyboards/ergodox/keymaps/osx_de/readme.md new file mode 100644 index 000000000..5011a9dd6 --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de/readme.md @@ -0,0 +1,41 @@ +#Ergodox EZ für OSX + +Dies ist nur ein kleiner Tweak der bestehenden firmware für das ErgoDox-EZ-Keyboard. Leider passte das layout nicht wirklich für OSX, deswegen habe ich einige Anpassungen gemacht. Dabei wurden folgende features umgesetzt: + +- Die Umlaute sollten an einigermassen sinnvollen Plätzen liegen +- der Umstieg sollte dadurch erleichtert werden, dass einige Tasten an ihren "normalen" Platz zurückgewandert sind. Z.B. ESC, Tab,... +- die Leertaste ist jetzt auf der rechten seite, neben Enter. Dafür hat der linke Daumen nun Backspace und Delete. +- die CMD- und Alt-Tasten sind in der Mitte einfach erreichbar. +- es gibt eine neue Layer die für Spiele genutzt werden kann (egosooter wie Counter Strike). Dort liegen die wichtigsten Tasten auf der linken Seite, im Daumenblock z.B. space und ctrl sowie die F-Tasten 1-4. Diese Layer ist über die Symbollayer erreichbar. +- Die Symbollayer wurde dahingehend angepasst, dass die klammern, etc nun auf beiden hälften der Tastatur zu finden sind +- der Zehnerblock wurde in eine eigene Layer umgezogen +- die Meh und Hyper-Tasten wurden in die Daumenblöcke umgezogen + +# Erstellt Mit Dem ErgodoxLayoutGenerator + +Der ErgodoxLayoutGenerator ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein. +Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar). + + + +------------------------------ + +# ErgoDox EZ for OSX + +This is only a little tweak of the existing default layout for the ErgoDox keyboard. Unfortunately the default layout did not work well with german OSX, so I created som adjustments. These were the features added and changed: + +- the umlaut-keys should be at their useful place more or less +- the switching should be made more easy so some other keys (like tab, esc) were moved to their default place +- the space key can now be used with both hands +- the CMD- and ALT-Keys moved to the middle, can be reached more easily. +- there is a new layer for using the cursor-keys, placed like on the default keyboard. This makes them useable for games also +- the symbollayer now has only symbols +- the number block was moved to a special layer +- meh and hyper went down to the thumb block + +# Created Using the ErgodoxLayoutGenerator + +The ErgodoxLayoutGenerator (ELG) is a little tool, which makes the creation and maintenance of keycaps a lot easier. It was written in Java and can be downloaded [here](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases). To use the tool, you need to have a current version of Oracles JDK installed. + +The documentation of the ELG can be viewed [here](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/). + diff --git a/keyboards/ergodox/keymaps/osx_de_adnw_koy/keymap.c b/keyboards/ergodox/keymaps/osx_de_adnw_koy/keymap.c new file mode 100644 index 000000000..6c4312a32 --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de_adnw_koy/keymap.c @@ -0,0 +1,174 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#include "keymap_neo2.h" +#include "keymap_uk.h" +#include "keymap_colemak.h" +#include "keymap_french_osx.h" +#include "keymap_nordic.h" +#include "keymap_dvorak.h" +#include "keymap_german.h" +#include "keymap_norwegian.h" +#include "keymap_fr_ch.h" +#include "keymap_german_osx.h" +#include "keymap_spanish.h" +#include "keymap_bepo.h" + +#define BASE 0 +#define SYMB 1 +#define MDIA 2 +#define QWERTZ 3 +#define NUMB 4 + +#define UNUSED 0 + +//Layout keymap.c generated with ErgodoxLayoutGenerator V1.0BETA1 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[BASE]=KEYMAP( +//left half + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LCTL, + KC_TAB, KC_K, KC_DOT, KC_O, KC_COMM, KC_Z, KC_LGUI, + TG(QWERTZ), KC_H, KC_A, KC_E, KC_I, KC_U, + KC_LSFT, CTL_T(KC_X), KC_Q, DE_AE, DE_UE, DE_OE, KC_LALT, + LT(SYMB,KC_GRV), DE_LESS, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + TG(MDIA), MEH_T(LSFT(DE_ACUT)), + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + //right half + KC_RCTL, KC_6, KC_7, KC_8, KC_9, KC_0, DE_OSX_MINS, + KC_RGUI, KC_V, KC_G, KC_C, KC_L, KC_MINS, KC_Y, + KC_D, KC_T, KC_R, KC_N, KC_S, LT(MDIA,KC_F), + KC_RALT, KC_B, KC_P, KC_W, KC_M, CTL_T(KC_J), KC_RSFT, + KC_UP, KC_DOWN, LGUI(KC_LSFT), KC_RBRC, LT(SYMB,KC_BSLS), + ALL_T(DE_ACUT), TG(NUMB), + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC), +[SYMB]=KEYMAP( +//left half + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_GRV, LSFT(KC_GRV), DE_EXLM, DE_QST, KC_TRNS, KC_TRNS, + KC_TRNS, DE_HASH, DE_DLR, LALT(LSFT(KC_7)), DE_SLSH, KC_DOT, + KC_TRNS, KC_TRNS, DE_LESS, DE_PERC, LALT(KC_7), LALT(KC_N), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_DEL, KC_TRNS, + //right half + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, LALT(LSFT(KC_7)), LALT(KC_5), LALT(KC_6), LALT(KC_7), DE_HASH, KC_F12, + DE_SLSH, DE_LPRN, DE_RPRN, LALT(KC_8), LALT(KC_9), KC_TRNS, + KC_TRNS, DE_AMPR, KC_GRV, LSFT(KC_GRV), DE_DQOT, DE_QUOT, DE_QST, + KC_TRNS, KC_DOT, KC_EXLM, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +[MDIA]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_WH_L, KC_WH_U, KC_WH_D, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MUTE, KC_MPRV, KC_MNXT, KC_UP, KC_TRNS, + KC_VOLU, KC_VOLD, KC_LEFT, KC_DOWN, KC_RIGHT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK), +[QWERTZ]=KEYMAP( +//left half + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(KC_V), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LGUI, + KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_LALT, + LT(SYMB,KC_GRV), DE_LESS, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + KC_TRNS, MEH_T(LSFT(DE_ACUT)), + KC_HOME, + KC_BSPC, KC_DEL, KC_END, + //right half + LGUI(KC_C), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_RGUI, KC_Y, KC_U, KC_I, KC_O, KC_P, DE_UE, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(MDIA,DE_AE), + KC_RALT, KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN, LGUI(KC_LSFT), KC_RBRC, LT(SYMB,KC_BSLS), + ALL_T(DE_ACUT), KC_TRNS, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC), +[NUMB]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, LSFT(KC_RBRC), KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_RBRC, KC_TRNS, + KC_TRNS, LSFT(KC_6), KC_1, KC_2, KC_3, LSFT(KC_7), KC_TRNS, + KC_0, KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +switch(id) { +case UNUSED: +//Macro: UNUSED//----------------------- + + + + + + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + + + +break; +} +return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + +uint8_t layer = biton32(layer_state); + +ergodox_board_led_off(); +ergodox_right_led_1_off(); +ergodox_right_led_2_off(); +ergodox_right_led_3_off(); +switch (layer) { + +default: +// none +break; +} + +}; + diff --git a/keyboards/ergodox/keymaps/osx_de_adnw_koy/osx_de_adnw_koy_highres.png b/keyboards/ergodox/keymaps/osx_de_adnw_koy/osx_de_adnw_koy_highres.png Binary files differnew file mode 100644 index 000000000..193aa339e --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de_adnw_koy/osx_de_adnw_koy_highres.png diff --git a/keyboards/ergodox/keymaps/osx_de_experimental/keymap.c b/keyboards/ergodox/keymaps/osx_de_experimental/keymap.c new file mode 100644 index 000000000..61b6a4fdb --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de_experimental/keymap.c @@ -0,0 +1,597 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_neo2.h" +#include "keymap_uk.h" +#include "keymap_colemak.h" +#include "keymap_nordic.h" +#include "keymap_dvorak.h" +#include "keymap_german.h" +#include "keymap_norwegian.h" +#include "keymap_fr_ch.h" +#include "keymap_german_osx.h" +#include "keymap_spanish.h" +#include "keymap_bepo.h" + + +/** +* This layout was generated using the ErgodoxLayoutGenerator (ELG). You can download it from https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases +* documentation about it can be found here https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/ +* Thanks to the team of Erez Zukerman for building the great Ergodox-EZ! +* +* use at own risk! +**/ + +#define BASE 0 +#define SYMB 1 +#define MDIA 2 +#define SMLY 3 +#define NUMB 4 +#define EGOS 5 + +#define SMLY_TOG_QUOT 0 + +#define M_TOGGLE_5 1 + +#define TGH_NUM 2 + +#define M_DE_OSX_PLUS_CTRLALT 3 + +#define SM_KISS 4 + +#define SM_FROWN 5 + +#define SM_CRY 6 + +#define SM_SMILE 7 + +#define SM_SMIRK 8 + +#define M_LGUI_SHFT 9 + +#define SM_HEART 10 + +#define TOG_HLD_MDIA 11 + +#define SM_LAUGH 12 + +#define SM_SAD 13 + +#define M_DE_OSX_CIRC_CTRLCMD 14 + +#define M_MEH_SH_ACUT 15 + + +//Layout keymap.c generated with ErgodoxLayoutGenerator V1.0BETA1 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/** +* Layer: BASE +* /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ +* | ESC | 1 | 2 | 3 | 4 | 5 | Hold or toggle | | Hold or toggle | 6 | 7 | 8 | 9 | 0 | ß | +* | | | | | | | Layer NUMB | | Layer MDIA | | | | | | | +* /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ +* | TAB | Q | W | E | R | T | Cmd | | Cmd | Z | U | I | O | P | Ü | +* | | | | | | | | | | | | | | | | +* /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/\-------------------\ \-------------------\/-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ +* | Alt | A | S | D | F | G | | H | J | K | L | Ö | Ä | +* | | | | | | | | | | | | | ALT | +* /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ /-------------------//-------------------//-------------------//-------------------//-------------------//-------------------//-------------------/ +* | Shift | Y | X | C | V | B | Alt | | Alt | N | M | , | . | - | Shift | +* | | Ctrl | | | | | | | | | | | | Ctrl | | +* \-------------------\\-------------------\\-------------------\\-------------------\\-------------------\\-------------------\\-------------------\ \-------------------\\-------------------\\-------------------\\-------------------\\-------------------\\-------------------\\-------------------\ +* +* +* /-------------------//-------------------//-------------------//-------------------//-------------------/ /-------------------//-------------------//-------------------//-------------------//-------------------/ +* | < | LongPress / Type | LongPress / Type | Shift+Ctrl | Type | | # | ACUT | CMD+Shift | ALT+Shift | + | +* | SYMB | DE_OSX_CIRC_CTRLCMD| DE_OSX_PLUS_CTRAlt | | Toggle SMLY | | Meh | Hyper | | | SYMB | +* \-------------------\\-------------------\\-------------------\\-------------------\/-------------------//-------------------/ /-------------------//-------------------/ \-------------------\\-------------------\\-------------------\\-------------------\\-------------------\ +* | HOME | END | | LEFT | RIGHT | +* | | | | | | +* \-------------------\/-------------------/ /-------------------/\-------------------\ +* | PGUP | | UP | +* | | | | +* /-------------------//-------------------//-------------------/ /-------------------//-------------------//-------------------/ +* | BSPC | DEL | PGDN | | DOWN | ENT | SPC | +* | | | | | | | | +* \-------------------\\-------------------\\-------------------\ \-------------------\\-------------------\\-------------------\ +* +* +**/ +[BASE]=KEYMAP( +//left half + KC_ESC, DE_OSX_1, DE_OSX_2, DE_OSX_3, DE_OSX_4, DE_OSX_5, M(TGH_NUM), + KC_TAB, DE_OSX_Q, DE_OSX_W, DE_OSX_E, DE_OSX_R, DE_OSX_T, KC_LGUI, + KC_LALT, DE_OSX_A, DE_OSX_S, DE_OSX_D, DE_OSX_F, DE_OSX_G, + KC_LSFT, CTL_T(DE_OSX_Y), DE_OSX_X, DE_OSX_C, DE_OSX_V, DE_OSX_B, KC_LALT, + LT(SYMB,DE_OSX_LESS), M(M_DE_OSX_CIRC_CTRLCMD), M(M_DE_OSX_PLUS_CTRLALT), LSFT(KC_LCTRL), M(SMLY_TOG_QUOT), + KC_HOME, KC_END, + KC_PGUP, + KC_BSPC, KC_DEL, KC_PGDN, + //right half + M(TOG_HLD_MDIA), DE_OSX_6, DE_OSX_7, DE_OSX_8, DE_OSX_9, DE_OSX_0, DE_OSX_SS, + KC_RGUI, DE_OSX_Z, DE_OSX_U, DE_OSX_I, DE_OSX_O, DE_OSX_P, DE_OSX_UE, + DE_OSX_H, DE_OSX_J, DE_OSX_K, DE_OSX_L, DE_OSX_OE, ALT_T(DE_OSX_AE), + KC_RALT, DE_OSX_N, DE_OSX_M, DE_OSX_COMM, DE_OSX_DOT, CTL_T(DE_OSX_MINS), KC_RSFT, + MEH_T(DE_OSX_HASH), ALL_T(DE_OSX_ACUT), LGUI(KC_LSFT), LALT(KC_LSFT), LT(SYMB,DE_OSX_PLUS), + KC_LEFT, KC_RIGHT, + KC_UP, + KC_DOWN, KC_ENT, KC_SPC), +/** +* Layer: SYMB +* /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ +* | APPLICATION| F1 | F2 | F3 | F4 | F5 | F5 | | F6 | F6 | F7 | F8 | F9 | F10 | F11 | +* | | | | | | | | | | | | | | | | +* /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ +* | | < | > | ! | ? | | | | | \ | [ | ] | < | > | ! | +* | | | | | | | | | | | | | | | | +* /-----------//-----------//-----------//-----------//-----------//-----------/\-----------\ \-----------\/-----------//-----------//-----------//-----------//-----------//-----------/ +* | | # | $ | \ | / | . | | / | ( | ) | { | } | # | +* | | | | | | | | | | | | | | +* /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ /-----------//-----------//-----------//-----------//-----------//-----------//-----------/ +* | | | < | % | | | ~ | | | | | | ~ | | | | | +* | | | | | | | | | | | | | | | | +* \-----------\\-----------\\-----------\\-----------\\-----------\\-----------\\-----------\ \-----------\\-----------\\-----------\\-----------\\-----------\\-----------\\-----------\ +* +* +* /-----------//-----------//-----------//-----------//-----------/ /-----------//-----------//-----------//-----------//-----------/ +* | | | | | | | ' | DQOT | | Toggle 5 | | +* | | | | | | | | | | | | +* \-----------\\-----------\\-----------\\-----------\/-----------//-----------/ /-----------//-----------/ \-----------\\-----------\\-----------\\-----------\\-----------\ +* | | | | F13 | F12 | +* | | | | | | +* \-----------\/-----------/ /-----------/\-----------\ +* | | | F14 | +* | | | | +* /-----------//-----------//-----------/ /-----------//-----------//-----------/ +* | | DEL | | | F15 | | | +* | | | | | | | | +* \-----------\\-----------\\-----------\ \-----------\\-----------\\-----------\ +* +* +**/ +[SYMB]=KEYMAP( +//left half + KC_APPLICATION, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, + KC_TRNS, DE_OSX_LESS, DE_OSX_MORE, DE_OSX_EXLM, DE_OSX_QST, KC_TRNS, KC_TRNS, + KC_TRNS, DE_OSX_HASH, DE_OSX_DLR, DE_OSX_BSLS, DE_OSX_SLSH, KC_DOT, + KC_TRNS, KC_TRNS, DE_OSX_LESS, DE_OSX_PERC, DE_OSX_PIPE, DE_OSX_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_DEL, KC_TRNS, + //right half + KC_F6, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, DE_OSX_BSLS, DE_OSX_LBRC, DE_OSX_RBRC, DE_OSX_LESS, DE_OSX_MORE, DE_OSX_EXLM, + DE_OSX_SLSH, DE_OSX_LPRN, DE_OSX_RPRN, DE_OSX_LCBR, DE_OSX_RCBR, DE_OSX_HASH, + KC_TRNS, DE_OSX_PIPE, DE_OSX_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + DE_OSX_QUOT, DE_OSX_DQOT, KC_TRNS, M(M_TOGGLE_5), KC_TRNS, + KC_F13, KC_F12, + KC_F14, + KC_F15, KC_TRNS, KC_TRNS), +/** +* Layer: MDIA +* /-----//-----//-----//-----//-----//-----//-----/ /-----//-----//-----//-----//-----//-----//-----/ +* | | | | | | | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* /-----//-----//-----//-----//-----//-----//-----/ /-----//-----//-----//-----//-----//-----//-----/ +* | | | BTN1 | U | BTN2 | U | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* /-----//-----//-----//-----//-----//-----/\-----\ \-----\/-----//-----//-----//-----//-----//-----/ +* | | | L | D | R | D | | | | | | | | +* | | | | | | | | | | | | | | +* /-----//-----//-----//-----//-----//-----//-----/ /-----//-----//-----//-----//-----//-----//-----/ +* | | | L | D | R | BTN3 | | | | | | | | UP | | +* | | | | | | | | | | | | | | | | +* \-----\\-----\\-----\\-----\\-----\\-----\\-----\ \-----\\-----\\-----\\-----\\-----\\-----\\-----\ +* +* +* /-----//-----//-----//-----//-----/ /-----//-----//-----//-----//-----/ +* | | | | | | | | | LEFT | DOWN | RIGHT| +* | | | | | | | | | | | | +* \-----\\-----\\-----\\-----\/-----//-----/ /-----//-----/ \-----\\-----\\-----\\-----\\-----\ +* | | | | MPRV | MNXT | +* | | | | | | +* \-----\/-----/ /-----/\-----\ +* | | | VOLU | +* | | | | +* /-----//-----//-----/ /-----//-----//-----/ +* | | | | | VOLD | MUTE | MPLY | +* | | | | | | | | +* \-----\\-----\\-----\ \-----\\-----\\-----\ +* +* +**/ +[MDIA]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, + KC_TRNS, KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, + KC_MPRV, KC_MNXT, + KC_VOLU, + KC_VOLD, KC_MUTE, KC_MPLY), +/** +* Layer: SMLY +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | Typing | Typing | Typing | | | | | +* | | | | | | | | | SM_SMILE| SM_SMIRK| SM_LAUGH| | | | | +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | | Typing | Typing | Typing | | | | +* | | | | | | | | | | SM_FROWN| SM_SAD | SM_CRY | | | | +* /--------//--------//--------//--------//--------//--------/\--------\ \--------\/--------//--------//--------//--------//--------//--------/ +* | | | | | | | | Typing | Typing | | | | | +* | | | | | | | | SM_HEART| SM_KISS | | | | | +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* \--------\\--------\\--------\\--------\\--------\\--------\\--------\ \--------\\--------\\--------\\--------\\--------\\--------\\--------\ +* +* +* /--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------/ +* | | | | | | | | | | | | +* | | | | | | | | | | | | +* \--------\\--------\\--------\\--------\/--------//--------/ /--------//--------/ \--------\\--------\\--------\\--------\\--------\ +* | | | | | | +* | | | | | | +* \--------\/--------/ /--------/\--------\ +* | | | | +* | | | | +* /--------//--------//--------/ /--------//--------//--------/ +* | | | | | | | | +* | | | | | | | | +* \--------\\--------\\--------\ \--------\\--------\\--------\ +* +* +**/ +[SMLY]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + M(SM_SMILE), M(SM_SMIRK), M(SM_LAUGH), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(SM_FROWN), M(SM_SAD), M(SM_CRY), KC_TRNS, KC_TRNS, KC_TRNS, + M(SM_HEART), M(SM_KISS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +/** +* Layer: NUMB +* /----//----//----//----//----//----//----/ /----//----//----//----//----//----//----/ +* | | | | | | | | | | F6 | F7 | F8 | F9 | F10 | F11 | +* | | | | | | | | | | | | | | | | +* /----//----//----//----//----//----//----/ /----//----//----//----//----//----//----/ +* | | | | UP | | | | | | / | 7 | 8 | 9 | * | F12 | +* | | | | | | | | | | | | | | | | +* /----//----//----//----//----//----/\----\ \----\/----//----//----//----//----//----/ +* | | | LEFT| DOWN| RGHT| | | / | 4 | 5 | 6 | + | - | +* | | | | | | | | | | | | | | +* /----//----//----//----//----//----//----/ /----//----//----//----//----//----//----/ +* | | | | | | | | | | % | 1 | 2 | 3 | | | +* | | | | | | | | | | | | | | | | +* \----\\----\\----\\----\\----\\----\\----\ \----\\----\\----\\----\\----\\----\\----\ +* +* +* /----//----//----//----//----/ /----//----//----//----//----/ +* | | | | | | | 0 | . | , | = | | +* | | | | | | | | | | | | +* \----\\----\\----\\----\/----//----/ /----//----/ \----\\----\\----\\----\\----\ +* | | | | | | +* | | | | | | +* \----\/----/ /----/\----\ +* | | | | +* | | | | +* /----//----//----/ /----//----//----/ +* | | | | | | | | +* | | | | | | | | +* \----\\----\\----\ \----\\----\\----\ +* +* +**/ +[NUMB]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + //right half + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, DE_OSX_SLSH, KC_7, KC_8, KC_9, DE_OSX_ASTR, KC_F12, + DE_OSX_SLSH, KC_4, KC_5, KC_6, DE_OSX_PLUS, DE_OSX_MINS, + KC_TRNS, DE_OSX_PERC, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, + KC_0, KC_DOT, KC_COMM, DE_OSX_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +/** +* Layer: EGOS +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* /--------//--------//--------//--------//--------//--------/\--------\ \--------\/--------//--------//--------//--------//--------//--------/ +* | Shift | | | | | | | | | | | | | +* | | | | | | | | | | | | | | +* /--------//--------//--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------//--------//--------/ +* | | | | | | | | | | | | | | | | +* | | | | | | | | | | | | | | | | +* \--------\\--------\\--------\\--------\\--------\\--------\\--------\ \--------\\--------\\--------\\--------\\--------\\--------\\--------\ +* +* +* /--------//--------//--------//--------//--------/ /--------//--------//--------//--------//--------/ +* | Ctrl | | | | | | | | | Toggle 5| | +* | | | | | | | | | | | | +* \--------\\--------\\--------\\--------\/--------//--------/ /--------//--------/ \--------\\--------\\--------\\--------\\--------\ +* | F1 | F2 | | | | +* | | | | | | +* \--------\/--------/ /--------/\--------\ +* | F3 | | | +* | | | | +* /--------//--------//--------/ /--------//--------//--------/ +* | SPC | Ctrl | F4 | | | | | +* | | | | | | | | +* \--------\\--------\\--------\ \--------\\--------\\--------\ +* +* +**/ +[EGOS]=KEYMAP( +//left half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F1, KC_F2, + KC_F3, + KC_SPC, KC_LCTL, KC_F4, + //right half + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, M(M_TOGGLE_5), KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +static uint16_t start; +switch(id) { +case SMLY_TOG_QUOT: +//Macro: SMLY_TOG_QUOT//----------------------- +if (record->event.pressed) { + start = timer_read(); + layer_state ^= (1<<SMLY); + layer_state &= (1<<SMLY); + return MACRO_NONE; } else { + layer_state ^= (1<<SMLY); + layer_state &= (1<<SMLY); + if (timer_elapsed(start) >150) { + return MACRO_NONE; + } else { + return MACRO(DOWN(KC_LSFT),TYPE(DE_OSX_HASH),UP(KC_LSFT),END); + } + } + +break; +case M_TOGGLE_5: +//Macro: M_TOGGLE_5//----------------------- + if (record->event.pressed){ + layer_state ^= (1<<5); + layer_state &= (1<<5); + } + +break; +case TGH_NUM: +//Macro: TGH_NUM//----------------------- +if (record->event.pressed){ + start = timer_read(); + layer_state ^=(1<<NUMB); + layer_state &=(1<<NUMB); + } else { + if (timer_elapsed(start) > 150) { + layer_state^=(1<<NUMB); + layer_state&=(1<<NUMB); + } + } +return MACRO_NONE; + +break; +case M_DE_OSX_PLUS_CTRLALT: +//Macro: M_DE_OSX_PLUS_CTRLALT//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(DOWN(KC_LCTRL),DOWN(KC_LALT),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LALT),END); + } else { + return MACRO(UP(KC_LCTRL),UP(KC_LALT),TYPE(KC_RBRC),END); + } + } + +break; +case SM_KISS: +//Macro: SM_KISS//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_DOT),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_RBRC),UP(KC_LSFT),END); + } + +break; +case SM_FROWN: +//Macro: SM_FROWN//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_DOT),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LALT),TYPE(KC_8),UP(KC_LALT),END); + } + +break; +case SM_CRY: +//Macro: SM_CRY//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_COMM),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_8),UP(KC_LSFT),END); + } + +break; +case SM_SMILE: +//Macro: SM_SMILE//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_DOT),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_9),UP(KC_LSFT),END); + } + +break; +case SM_SMIRK: +//Macro: SM_SMIRK//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_COMM),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_9),UP(KC_LSFT),END); + } + +break; +case M_LGUI_SHFT: +//Macro: M_LGUI_SHFT//----------------------- +if (record->event.pressed){ + return MACRO(DOWN(KC_LGUI),DOWN(KC_LSFT),END); + }else{ + return MACRO(UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),UP(KC_LGUI),UP(KC_LSFT),U(LGUI),U(LSFT),END); + } + +break; +case SM_HEART: +//Macro: SM_HEART//----------------------- +if (record->event.pressed) { + return MACRO(TYPE(KC_GRV),TYPE(KC_3),END); + } + +break; +case TOG_HLD_MDIA: +//Macro: TOG_HLD_MDIA//----------------------- +if (record->event.pressed){ + start = timer_read(); + layer_state ^=(1<<MDIA); + layer_state &=(1<<MDIA); + } else { + if (timer_elapsed(start) > 150) { + layer_state^=(1<<MDIA); + layer_state&=(1<<MDIA); + } + } +return MACRO_NONE; + +break; +case SM_LAUGH: +//Macro: SM_LAUGH//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_DOT),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_D),UP(KC_LSFT),END); + } + +break; +case SM_SAD: +//Macro: SM_SAD//----------------------- +if (record->event.pressed) { + return MACRO(DOWN(KC_LSFT),TYPE(KC_DOT),UP(KC_LSFT),TYPE(KC_SLSH),DOWN(KC_LSFT),TYPE(KC_8),UP(KC_LSFT),END); + } + +break; +case M_DE_OSX_CIRC_CTRLCMD: +//Macro: M_DE_OSX_CIRC_CTRLCMD//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(DOWN(KC_LCTRL),DOWN(KC_LGUI),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LGUI),END); + } else { + return MACRO(UP(KC_LCTRL),UP(KC_LGUI),TYPE(KC_NUBS),END); + } + } + +break; +case M_MEH_SH_ACUT: +//Macro: M_MEH_SH_ACUT//----------------------- +if (record->event.pressed) { + start = timer_read(); + return MACRO(DOWN(KC_LCTRL),DOWN(KC_LSFT),DOWN(KC_LALT),END); + } else { + if (timer_elapsed(start) >150) { + return MACRO(U(LCTRL),U(LSFT),U(LALT),END); + } else { + return MACRO(UP(KC_LCTRL),UP(KC_LALT),TYPE(DE_OSX_ACUT),UP(KC_LSFT),END); + } + } + +break; +} +return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + +uint8_t layer = biton32(layer_state); + +ergodox_board_led_off(); +ergodox_right_led_1_off(); +ergodox_right_led_2_off(); +ergodox_right_led_3_off(); +switch (layer) { + + case SYMB: + ergodox_right_led_1_on(); + + + break; + case MDIA: + + ergodox_right_led_2_on(); + + break; + case NUMB: + + + ergodox_right_led_3_on(); + break; + case EGOS: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; +default: +// none +break; +} + +}; + diff --git a/keyboards/ergodox/keymaps/osx_de_experimental/osx_de_experimental_highres.png b/keyboards/ergodox/keymaps/osx_de_experimental/osx_de_experimental_highres.png Binary files differnew file mode 100644 index 000000000..031d874a7 --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de_experimental/osx_de_experimental_highres.png diff --git a/keyboards/ergodox/keymaps/osx_de_experimental/readme.md b/keyboards/ergodox/keymaps/osx_de_experimental/readme.md new file mode 100644 index 000000000..e6a101841 --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_de_experimental/readme.md @@ -0,0 +1,22 @@ + +# Ergodox und Ergodox-EZ experimentelles Layout + +dieses layout ist experimentell und wird im Lufe der Zeit viele Änderungen und Verbesserungen durchlaufen. Falls diese sich als vorteilhaft erweisen, werden sie evtl. auch in das `osx_de` layout übernommen. + + + +# Erstellt Mit Dem ErgodoxLayoutGenerator + +Der ErgodoxLayoutGenerator (ELG) ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein. +Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar). +--------------------------------------------------------------------------------------------------------------------- + +# Ergodox and Ergodox-EZ experimental layout + +This is an experimental layout which will undergo heavy changes over time. If changes prove to be good, they might also move into the `osx_de` layout. + +Created Using the ErgodoxLayoutGenerator + +The ErgodoxLayoutGenerator (ELG) is a little tool, which makes the creation and maintenance of keycaps a lot easier. It was written in Java and can be downloaded [here](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases). To use the tool, you need to have a current version of Oracles JDK installed. + +The documentation of the ELG can be viewed [here](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/).
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/osx_fr/keymap.c b/keyboards/ergodox/keymaps/osx_fr/keymap.c new file mode 100644 index 000000000..7dee284fa --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_fr/keymap.c @@ -0,0 +1,187 @@ +// French AZERTY version of the default_osx file +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_french_osx.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | - | & | é | " | ' | ( | LEFT | | RIGHT| § | è | ! | ç | à | ) | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | A | Z | E | R | T | L1 | | L1 | Y | U | I | O | P | ` | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | Q | S | D | F | G |------| |------| H | J | K | L | M | LGui | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |W/Ctrl| X | C | V | B | | | | N | , |; / L2| : |=/Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | ù /L1| < |AltShf| Left | Right| | Up | Down | ^ | $ | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + FR_MINS, FR_AMP, FR_EACU, FR_QUOT, FR_APOS, FR_LPRN, KC_LEFT, + KC_DELT, FR_A, FR_Z, KC_E, KC_R, KC_T, TG(1), + KC_BSPC, FR_Q, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(FR_W), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,FR_UGRV), FR_LESS, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC, KC_BSPC, KC_END, + + // right hand + KC_RGHT, FR_SECT, FR_EGRV, FR_EXLM, FR_CCED, FR_AGRV, FR_RPRN, + TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, FR_GRV, + KC_H, KC_J, KC_K, KC_L, FR_M, KC_LGUI, + MEH_T(KC_NO), KC_N, FR_COMM, LT(MDIA, FR_SCLN), FR_COLN, CTL_T(FR_EQL), KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN, KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | , | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,FR_EXLM,FR_AT, FR_LCBR,FR_RCBR,FR_PIPE,KC_TRNS, + KC_TRNS,FR_HASH,FR_DLR, FR_LPRN,FR_RPRN,FR_GRV, + KC_TRNS,FR_PERC,FR_CIRC,FR_LBRC,FR_RBRC,FR_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, FR_7, FR_8, FR_9, FR_ASTR, KC_F12, + KC_DOWN, FR_4, FR_5, FR_6, FR_PLUS, KC_TRNS, + KC_TRNS, FR_AMP, FR_1, FR_2, FR_3, FR_BSLS, KC_TRNS, + KC_TRNS,FR_COMM, FR_0, FR_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/osx_kinesis_pnut/keymap.c b/keyboards/ergodox/keymaps/osx_kinesis_pnut/keymap.c new file mode 100644 index 000000000..11281df8a --- /dev/null +++ b/keyboards/ergodox/keymaps/osx_kinesis_pnut/keymap.c @@ -0,0 +1,191 @@ +// Netable differences vs. the default firmware for the ErgoDox EZ: +// 1. The Cmd key is now on the right side, making Cmd+Space easier. +// 2. The media keys work on OSX (But not on Windows). +// Wanted to map default layer of my EZ to my existing Kinesis Mapping. +// Only default layer was remapped all others layers are standard Ergodox EZ +// Very personal mapping of-course, but who knows a starting point for others. + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | CapsL | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ESC | A | S | D | F | G |------| |------| H | J | K | L |; / L2| '" | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |AltShf|Grv/L1| '" | Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LGui | App | | Ctrl/Esc | RGui | + * ,------|------|------| |------+--------+------. + * | | | Home | | = | | | + * | Backs|Delete|------| |------| Enter |Space | + * | pace | | End | | TAB | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_CAPSLOCK, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LALT(KC_LSFT), LT(SYMB,KC_GRV),KC_QUOT,KC_LEFT,KC_RGHT, + KC_LGUI, ALT_T(KC_APP), + KC_HOME, + KC_BSPC,KC_DELT,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOTE, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + CTL_T(KC_ESC), KC_LGUI, + KC_EQL, + KC_TAB, KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/plover/keymap.c b/keyboards/ergodox/keymaps/plover/keymap.c new file mode 100644 index 000000000..12b3aa212 --- /dev/null +++ b/keyboards/ergodox/keymaps/plover/keymap.c @@ -0,0 +1,228 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define PLVR 3 // Plover layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LGui | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | |Plover| Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | Home | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | End | | PgUp | | | + * |Backsp|Delete|------| |------| Enter |Space | + * | ace | | LAlt | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LGUI, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_HOME, + KC_END, + KC_BSPC,KC_DELT,KC_LALT, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(3), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT, + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------|MsLeft|MsDown| MsUp |MsRght| | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Fwd |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), + +/* Keymap 4: Steno for Plover from https://github.com/shayneholmes/tmk_keyboard/commit/11290f8489013018f778627db725160c745e75bd + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | q | w | e | r | t |------| |------| y | u | i | o | p | [ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | a | s | d | f | g | | | | h | j | k | l | ; | ' | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | c | v |------| |------| n | m | + * | | | | | | | | + * `--------------------' `--------------------' + */ + +[PLVR] = KEYMAP( // layout: layer 4: Steno for Plover + // left hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_FN4, KC_NO, + KC_NO, + KC_C, KC_V, KC_NO, + // right hand + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_NO, KC_N, KC_M +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/plums/keymap.c b/keyboards/ergodox/keymaps/plums/keymap.c new file mode 100644 index 000000000..2853455e3 --- /dev/null +++ b/keyboards/ergodox/keymaps/plums/keymap.c @@ -0,0 +1,229 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | F5 | |Hypr+M| 6 | 7 | 8 | 9 | 0 | Mute | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LGui | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| SYMB | | MDIA |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Ca/Ctl| { | ( | | | : | | - | = | ) | } |C`/Ctl| + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LGA | LAlt | | RAlt | Play | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * |Backsp| Esc |------| |------|Enter |Space | + * |ace | | End | | PgDn | | | + * `--------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, TG(SYMB), + F(0), KC_LCBR, KC_LPRN,KC_PIPE,KC_COLN, + LGUI(KC_LALT), KC_LALT, + KC_HOME, + KC_BSPC, KC_ESC, KC_END, + // right hand + HYPR(KC_M), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MUTE, + KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + TG(MDIA), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_MINS, KC_EQL, KC_RPRN, KC_RCBR, F(1), + KC_RALT, KC_MPLY, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | | | | | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Left | Down | Up | Right| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------|MsLeft|MsDown| MsUp |MsRght| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |VolUp |VolDn | Prev | Next | | | LClk | RClk | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MACRO_TAP(0), // FN0 - Ctrl + a (For screen/tmux) + [1] = ACTION_MACRO_TAP(1) // FN1 - Ctrl + ` (For quake style console) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. +{ + switch(id) { + case 0: + if (record->event.pressed) { + if (record->tap.count) { + if (record->tap.interrupted) { + record->tap.count = 0; + // hold press action + register_code(KC_LCTL); + } else { + // tap press action + return MACRO( D(LCTL), T(A), U(LCTL), END ); + } + } else { + // hold press action + register_code(KC_LCTL); + } + } else { + if (record->tap.count) { + // tap release action + } else { + // hold release action + unregister_code(KC_LCTL); + } + record->tap.count = 0; + } + break; + case 1: + if (record->event.pressed) { + if (record->tap.count) { + if (record->tap.interrupted) { + record->tap.count = 0; + // hold press action + register_code(KC_RCTL); + } else { + // tap press action + return MACRO( DOWN(KC_RCTL), TYPE(KC_GRV), UP(KC_RCTL), END ); + } + } else { + // hold press action + register_code(KC_RCTL); + } + } else { + if (record->tap.count) { + // tap release action + } else { + // hold release action + unregister_code(KC_RCTL); + } + record->tap.count = 0; + } + break; + } + return MACRO_NONE; +}; + + + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/plums/plums.png b/keyboards/ergodox/keymaps/plums/plums.png Binary files differnew file mode 100644 index 000000000..2f127c4ca --- /dev/null +++ b/keyboards/ergodox/keymaps/plums/plums.png diff --git a/keyboards/ergodox/keymaps/plums/readme.md b/keyboards/ergodox/keymaps/plums/readme.md new file mode 100644 index 000000000..b72329eef --- /dev/null +++ b/keyboards/ergodox/keymaps/plums/readme.md @@ -0,0 +1,11 @@ +# ErgoDox EZ Plums Configuration + +## Changelog + +* Apr 23, 2016 (v0.1.0): + * Shortcut for iTerm2 quake style dropdown (Ctrl+`) + * Shortcut for screen/tmux (Ctrl+a) + * Shortcut for shush (Hyper+m) + * Combo modifier for LGUI + LALT + + diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c new file mode 100644 index 000000000..24d0c4ecb --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/keymap.c @@ -0,0 +1,46 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, + CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, + // + /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_NO, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_MPLY, KC_MNXT, + KC_MPRV, + KC_RALT, KC_QUOT, KC_SPC + ) +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md new file mode 100644 index 000000000..80475ab21 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -0,0 +1,28 @@ +# Roman's Layout + +There is only one layer based on [Norman layout](https://normanlayout.info/). + +Looking for multiple-layer layouts? + +- [Symbols, arrows, plover, HJKL arrows](../romanzolotarev-norman-plover-osx-hjkl/) +- [Same with IJKL arrows](../romanzolotarev-norman-plover-osx/) + +[](http://www.keyboard-layout-editor.com/#/gists/9e89d54f1ea6eeeb7dab1b2d19d28195) + +## Functional Keys + +- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). +- Tap `F2` to copy screenshot to the clipboard. +- Hold `SHIFT` and tap `F2` to save screenshot as a file. +- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). + +## CTRL/ESC + +CTRL and ESC are frequently used in Vim. + +- Tap `CTRL/ESC` to send `ESC`. +- Hold `CTRL/ESC` to use as `CTRL`. + +## Activate N-rollover + +- Hold left `SHIFT` and right `SHIRT` and then tap `N`. diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/romanzolotarev-norman-osx.png b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/romanzolotarev-norman-osx.png Binary files differnew file mode 100644 index 000000000..4b9433be2 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/romanzolotarev-norman-osx.png diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/keymap.c new file mode 100644 index 000000000..9f41e5189 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/keymap.c @@ -0,0 +1,134 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 +#define SYMB 1 +#define PLVR 2 +#define ARRW 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F14, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, TG(PLVR), + CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_LALT, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_FN1, + // + /*-*/ KC_F15, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_BSLS, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_RALT, KC_F4, KC_F5, KC_F6, + KC_MPLY, KC_MNXT, + KC_MPRV, + KC_FN3, KC_QUOT, KC_SPC + ), + [SYMB] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + // + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + /*-*/ /*-*/ KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), + [PLVR] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_C, KC_V, KC_NO, + // + /*-*/ KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + /*-*/ KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, + /*-*/ /*-*/ KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + /*-*/ KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + /*-*/ /*-*/ /*-*/ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_NO, KC_N, KC_M + ), + [ARRW] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + // + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [SYMB] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Symbols Layer + [PLVR] = ACTION_LAYER_TAP_TOGGLE(PLVR), // FN2 - Momentary Plover Layer + [ARRW] = ACTION_LAYER_TAP_TOGGLE(ARRW), // FN3 - Momentary Arrows Layer +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case PLVR: + ergodox_right_led_2_on(); + break; + case ARRW: + ergodox_right_led_3_on(); + break; + default: + break; + } +}; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md new file mode 100644 index 000000000..16cebd091 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md @@ -0,0 +1,50 @@ +# Roman's Layout + +There are four layers: + +- **BASE** is [Norman layout](https://normanlayout.info/). +- **SYMB** for numbers and symbols. +- **PLVR** is optimized for [Plover](http://www.openstenoproject.org). +- **ARRW** for navigation (same fingers for arrows as HJKL on QWERTY). + +Looking for IJKL arrows? [Here we +go](../romanzolotarev-norman-plover-osx/). + +[](http://www.keyboard-layout-editor.com/#/gists/56ffedceb0668dda47c993e7271563e0) + +## Switching + +- Tap `SYMB` to toggle **SYMB**. +- Tap `ARRW` to toggle **ARRW**. +- Hold `SYMB` (or `ARRW`) to activate **SYMB** (or **ARRW**) while holding. +- Tap `PLVR` to toggle **PLVR**. + +## LEDs + +- Red: SYMB is on. +- Green: PLVR is on. +- Blue: ARRW is on. + +## Functional Keys + +- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). +- Tap `F2` to copy screenshot to the clipboard. +- Hold `SHIFT` and tap `F2` to save screenshot as a file. +- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). +- Tap `F14`, `F15` to adjust display brightness. + +**IMPORTANT**: If you have another keyboard connected via Bluetooth, then +`F14` and `F15` will not work. Turn off that Bluetooth keyboard. Re-plug +you ErgoDox. Enjoy! + +## CTRL/ESC + +Both of those keys are frequently used in Vim. + +- Tap `CTRL/ESC` to send `ESC`. +- Hold `CTRL/ESC` to use as `CTRL`. + +## Activate N-rollover + +- While in **BASE** hold left `SHIFT` and right `SHIRT` and then tap `N`. +- Then you can activate **PLVR** and use ErgoDox EZ for steno. diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/romanzolotarev-norman-plover-osx-hjkl.png b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/romanzolotarev-norman-plover-osx-hjkl.png Binary files differnew file mode 100644 index 000000000..cdc535f79 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx-hjkl/romanzolotarev-norman-plover-osx-hjkl.png diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/keymap.c new file mode 100644 index 000000000..563e24872 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/keymap.c @@ -0,0 +1,134 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 +#define SYMB 1 +#define PLVR 2 +#define ARRW 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F14, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, TG(PLVR), + CTL_T(KC_ESC), KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_LALT, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_FN1, + // + /*-*/ KC_F15, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ KC_BSLS, KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_RALT, KC_F4, KC_F5, KC_F6, + KC_MPLY, KC_MNXT, + KC_MPRV, + KC_FN3, KC_QUOT, KC_SPC + ), + [SYMB] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + // + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + /*-*/ /*-*/ KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), + [PLVR] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_C, KC_V, KC_NO, + // + /*-*/ KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + /*-*/ KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, + /*-*/ /*-*/ KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + /*-*/ KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + /*-*/ /*-*/ /*-*/ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_NO, KC_N, KC_M + ), + [ARRW] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + // + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [SYMB] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Symbols Layer + [PLVR] = ACTION_LAYER_TAP_TOGGLE(PLVR), // FN2 - Momentary Plover Layer + [ARRW] = ACTION_LAYER_TAP_TOGGLE(ARRW), // FN3 - Momentary Arrows Layer +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case PLVR: + ergodox_right_led_2_on(); + break; + case ARRW: + ergodox_right_led_3_on(); + break; + default: + break; + } +}; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/readme.md new file mode 100644 index 000000000..804c52a76 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/readme.md @@ -0,0 +1,50 @@ +# Roman's Layout + +There are four layers: + +- **BASE** is [Norman layout](https://normanlayout.info/). +- **SYMB** for numbers and symbols. +- **PLVR** is optimized for [Plover](http://www.openstenoproject.org). +- **ARRW** for navigation (same fingers for arrows as IJKL on QWERTY). + +Looking for HJKL arrows? [Here we +go](../romanzolotarev-norman-plover-osx-hjkl/). + +[](http://www.keyboard-layout-editor.com/#/gists/8ebcb701ecb763944417) + +## Switching + +- Tap `SYMB` to toggle **SYMB**. +- Tap `ARRW` to toggle **ARRW**. +- Hold `SYMB` (or `ARRW`) to activate **SYMB** (or **ARRW**) while holding. +- Tap `PLVR` to toggle **PLVR**. + +## LEDs + +- Red: SYMB is on. +- Green: PLVR is on. +- Blue: ARRW is on. + +## Functional Keys + +- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). +- Tap `F2` to copy screenshot to the clipboard. +- Hold `SHIFT` and tap `F2` to save screenshot as a file. +- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). +- Tap `F14`, `F15` to adjust display brightness. + +**IMPORTANT**: If you have another keyboard connected via Bluetooth, then +`F14` and `F15` will not work. Turn off that Bluetooth keyboard. Re-plug +you ErgoDox. Enjoy! + +## CTRL/ESC + +Both of those keys are frequently used in Vim. + +- Tap `CTRL/ESC` to send `ESC`. +- Hold `CTRL/ESC` to use as `CTRL`. + +## Activate N-rollover + +- While in **BASE** hold left `SHIFT` and right `SHIRT` and then tap `N`. +- Then you can activate **PLVR** and use ErgoDox EZ for steno. diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/romanzolotarev-norman-plover-osx.png b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/romanzolotarev-norman-plover-osx.png Binary files differnew file mode 100644 index 000000000..10b0752be --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-plover-osx/romanzolotarev-norman-plover-osx.png diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/keymap.c b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/keymap.c new file mode 100644 index 000000000..5569f5c74 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/keymap.c @@ -0,0 +1,74 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 +#define QWRT 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F5, + KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_E, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_LGUI, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_MUTE, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_BSPC, CTL_T(KC_ESC), KC_LALT, + // + /*-*/ KC_F6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + /*-*/ TG(QWRT), KC_J, KC_U, KC_R, KC_L, KC_SCLN, KC_MINS, + /*-*/ /*-*/ KC_Y, KC_N, KC_I, KC_O, KC_H, KC_ENT, + /*-*/ KC_RBRC, KC_P, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + /*-*/ /*-*/ /*-*/ KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_MPLY, KC_MNXT, + KC_MPRV, + KC_RALT, KC_QUOT, KC_SPC + ), + [QWRT] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_E, KC_R, KC_T, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_D, KC_F, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + // + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS, + /*-*/ /*-*/ KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS, + /*-*/ KC_TRNS, KC_N, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case QWRT: + ergodox_right_led_1_on(); + break; + default: + break; + } +}; diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/readme.md new file mode 100644 index 000000000..0e78c130b --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/readme.md @@ -0,0 +1,34 @@ +# Roman's Layout + +There are two layers: + +- **BASE** is [Norman layout](https://normanlayout.info/). +- **QWRT** is QWERTY. + +[](http://www.keyboard-layout-editor.com/#/gists/3b236f450da474dc506a5a80390c3cc7) + +## Switching + +- Tap `QWRT` to toggle **QWRT**. + +## LEDs + +- Red: QWRT is on. + +## Functional Keys + +- Tap `F1` to mute microphone via [Shush](http://mizage.com/shush/). +- Tap `F2` to copy screenshot to the clipboard. +- Hold `SHIFT` and tap `F2` to save screenshot as a file. +- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/). + +## CTRL/ESC + +Both CTRL and ESC are frequently used in Vim. + +- Tap `CTRL/ESC` to send `ESC`. +- Hold `CTRL/ESC` to use as `CTRL`. + +## Activate N-rollover + +- Hold left `SHIFT` and right `SHIRT` and then tap `N`. diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/romanzolotarev-norman-qwerty-osx.png b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/romanzolotarev-norman-qwerty-osx.png Binary files differnew file mode 100644 index 000000000..34762ecb7 --- /dev/null +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-qwerty-osx/romanzolotarev-norman-qwerty-osx.png diff --git a/keyboards/ergodox/keymaps/sneako/keymap.c b/keyboards/ergodox/keymaps/sneako/keymap.c new file mode 100644 index 000000000..08cadd685 --- /dev/null +++ b/keyboards/ergodox/keymaps/sneako/keymap.c @@ -0,0 +1,187 @@ +// Based on `default_osx` +// Replace left Bksp with Ctrl/Esc +// Remove the Ctrl from Z and / +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Ctrl/Esc| A | S | D | F | G |------| |------| H | J | K | L |; / L2| LGui | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/sneako/readme.md b/keyboards/ergodox/keymaps/sneako/readme.md new file mode 100644 index 000000000..8dd110ee6 --- /dev/null +++ b/keyboards/ergodox/keymaps/sneako/readme.md @@ -0,0 +1,6 @@ +# ergodox_keymap + +Based on the default Ergodox EZ firmware + +Replaced the left side Bksp with a Crtl/Esc, this really helps in vim. +Removed the Ctrls from the Z and / keys. diff --git a/keyboards/ergodox/keymaps/software_neo2/keymap.c b/keyboards/ergodox/keymaps/software_neo2/keymap.c new file mode 100644 index 000000000..41ace403d --- /dev/null +++ b/keyboards/ergodox/keymaps/software_neo2/keymap.c @@ -0,0 +1,139 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_neo2.h" + +// Layer names +#define BASE 0 // default layer +#define MDIA 1 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ^ | 1 | 2 | 3 | 4 | 5 | Play | | Next | 6 | 7 | 8 | 9 | 0 |BackSpce| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | X | V | L | C | W | L1 | | L1 | K | H | G | F | Q | ß | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | U | I | A | E | O |------| |------| S | N | R | T | D | Y | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Ü/Ctrl| Ö/C-S| Ä/Alt| P | Z | | | | B | M | , | . | J | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | L1 | Home | PgDn | PgUp | End | | Right| Down | Up | Left | Esc | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------+------+------| |------+--------+------. + * | | |NeoL2 | |NeoL2 | | | + * | Tab |Backsp|------| |------| Space |Enter | + * | |ace |NeoL1 | |NeoL1 | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, + KC_DELT, NEO_X, NEO_V, NEO_L, NEO_C, NEO_W, TG(1), + KC_CAPS, NEO_U, NEO_I, NEO_A, NEO_E, NEO_O, + KC_LSFT, CTL_T(NEO_UE), C_S_T(NEO_OE), ALT_T(NEO_AE), NEO_P, NEO_Z, ALL_T(KC_NO), + DE_LESS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, + ALT_T(KC_APP),KC_LGUI, + NEO_L2_L, + KC_TAB,KC_BSPC,NEO_L1_L, + // right hand + KC_MNXT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), NEO_K, NEO_H, NEO_G, NEO_F, NEO_Q, NEO_SS, + NEO_S, NEO_N, NEO_R, NEO_T, NEO_D, NEO_Y, + MEH_T(KC_NO),NEO_B, NEO_M, KC_COMM, KC_DOT, NEO_J, KC_RSFT, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_ESC, + KC_LALT,CTL_T(KC_ESC), + NEO_L2_R, + NEO_L1_R,KC_SPC, KC_ENT + ), +/* Keymap 1: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | |MsAcl0|MsAcl1|MsAcl2| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Back |Forwd | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11, + KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12, + KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), +}; + +const uint16_t PROGMEM fn_actions[] = { + /* [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) */ +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case MDIA: + ergodox_right_led_2_on(); + break; + default: + ergodox_board_led_off(); + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/supercoder/config.h b/keyboards/ergodox/keymaps/supercoder/config.h new file mode 100644 index 000000000..2de3599f8 --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/config.h @@ -0,0 +1,9 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H 1 + +#include "../../config.h" + +#undef LOCKING_SUPPORT_ENABLE +#undef LOCKING_RESYNC_ENABLE + +#endif diff --git a/keyboards/ergodox/keymaps/supercoder/images/layout.png b/keyboards/ergodox/keymaps/supercoder/images/layout.png Binary files differnew file mode 100644 index 000000000..c72958c6e --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/images/layout.png diff --git a/keyboards/ergodox/keymaps/supercoder/images/supercoder_2000.jpg b/keyboards/ergodox/keymaps/supercoder/images/supercoder_2000.jpg Binary files differnew file mode 100644 index 000000000..d690eaf02 --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/images/supercoder_2000.jpg diff --git a/keyboards/ergodox/keymaps/supercoder/keymap.c b/keyboards/ergodox/keymaps/supercoder/keymap.c new file mode 100644 index 000000000..775acf2c9 --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/keymap.c @@ -0,0 +1,75 @@ +/* + * SuperCoder 2000 layout + */ + +#include "ergodox.h" + +/* Layers */ + +#define SC2K 0 // default layer + +/* The Keymap */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Keymap 0: Base Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | 0 | 0 | 0 | 0 | 0 | 0 | 0 | | 1 | 1 | 1 | 1 | 1 | 1 | 1 | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | 0 | 0 | 0 | 0 | 0 | 0 | 0 | | 1 | 1 | 1 | 1 | 1 | 1 | 1 | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | 0 | 0 | 0 | 0 | 0 | 0 |------| |------| 1 | 1 | 1 | 1 | 1 | 1 | + * |-----------+------+------+------+------+------| 0 | | 1 |------+------+------+------+------+-----------| + * | 0 | 0 | 0 | 0 | 0 | 0 | | | | 1 | 1 | 1 | 1 | 1 | 1 | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | 0 | 0 | 0 | 0 | 0 | | 1 | 1 | 1 | 1 | 1 | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | DONE | DONE | | DONE | DONE | + * ,------|------|------| |------+------+------. + * | | | DONE | | DONE | | | + * | DONE | DONE |------| |------| DONE | DONE | + * | | | DONE | | DONE | | | + * `--------------------' `--------------------' + */ +[SC2K] = KEYMAP( + // left hand + KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 +,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 +,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 +,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 +,KC_0 ,KC_0 ,KC_0 ,KC_0 ,KC_0 + + ,KC_ENT ,KC_ENT + ,KC_ENT + ,KC_ENT ,KC_ENT ,KC_ENT + + // right hand + ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 + ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 + ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 + ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 + ,KC_1 ,KC_1 ,KC_1 ,KC_1 ,KC_1 + + ,KC_ENT ,KC_ENT + ,KC_ENT + ,KC_ENT ,KC_ENT ,KC_ENT + ), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +} diff --git a/keyboards/ergodox/keymaps/supercoder/makefile.mk b/keyboards/ergodox/keymaps/supercoder/makefile.mk new file mode 100644 index 000000000..41a195d9c --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/makefile.mk @@ -0,0 +1,6 @@ +BOOTMAGIC_ENABLE=no +COMMAND_ENABLE=no +SLEEP_LED_ENABLE=no +UNICODE_ENABLE=no +MOUSEKEY_ENABLE=no +EXTRAKEY_ENABLE=no diff --git a/keyboards/ergodox/keymaps/supercoder/readme.md b/keyboards/ergodox/keymaps/supercoder/readme.md new file mode 100644 index 000000000..8ef96eddf --- /dev/null +++ b/keyboards/ergodox/keymaps/supercoder/readme.md @@ -0,0 +1,29 @@ +SuperCoder 2000 layout for the ErgoDox +================================================== + + + +Ever found yourself in need of entering binary codes rapidly? Ever wanted to use +all ten fingers to do so? Ever felt your SuperCoder 2000 too limiting, by only +having three buttons? We heard you! With this layout for the ErgoDox EZ, you +will be able to tap in binary at an unparalleled speed and accuracy! Efficiency +never seen before! + +Behold the Ultimate SuperCoder 2000 layout! + + + +### To use it... + +To use this piece of top quality engineering, you can either +[download the hex file][hex] we have prepared for you, or you can compile it on +your own: + + [hex]: https://raw.githubusercontent.com/algernon/ergodox-supercoder/master/supercoder.hex + +``` +$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ cd qmk_firmware/keyboards/ergodox +$ git clone https://github.com/algernon/ergodox-supercoder.git keymaps/supercoder +$ make KEYMAP=supercoder +``` diff --git a/keyboards/ergodox/keymaps/techtomas/keymap.c b/keyboards/ergodox/keymaps/techtomas/keymap.c new file mode 100644 index 000000000..93d59d487 --- /dev/null +++ b/keyboards/ergodox/keymaps/techtomas/keymap.c @@ -0,0 +1,231 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define APP 2 // app layer +#define CNTL 3 // control layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | L2/` | 1 | 2 | 3 | 4 | 5 |CmdSpc| | - | 6 | 7 | 8 | 9 | 0 | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | MEH/Tab| Q | W | E | R | T | [ | | ] | Y | U | I | O | P | MEH/\ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Hyp/Esc | A | S | D | F | G |------| |------| H | J | K | L | L2/; | Hyp/' | + * |--------+------+------+------+------+------| Tab | | STab |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | L2// | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |L1/Lft|L3/Rht| LCtl | LAlt | LGui | | Rgui | Up | Dn | L3 | L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | LCtl | LGui | |AltGui|ShfGui| + * ,-------|------|------| |------+--------+------. + * | | |L1/Hom| |L2/PUp| | | + * | Backsp|Delete|------| |------| Enter | Space | + * | | |L3/End| |L1/PDn| | | + * `--------------------' `-----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + LT(APP,KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(KC_SPC), + MEH_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, + ALL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TAB, + LT(SYMB,KC_LEFT), LT(CNTL,KC_RIGHT), KC_LCTL, KC_LALT, KC_LGUI, + KC_LCTL, KC_LGUI, + LT(SYMB,KC_HOME), + KC_BSPC, KC_DELETE, LT(CNTL,KC_END), + // right hand + KC_MINS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, MEH_T(KC_BSLS), + KC_H, KC_J, KC_K, KC_L, LT(APP,KC_SCLN), ALL_T(KC_QUOT), + S(KC_TAB), KC_N, KC_M, KC_COMM, KC_DOT, LT(APP,KC_SLSH), KC_RSFT, + KC_RGUI, KC_UP, KC_DOWN, KC_FN3, KC_FN1, + LALT(KC_LGUI), S(KC_LGUI), + LT(APP,KC_PGUP), + LT(SYMB,KC_PGDN), KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | Tab | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | < | | > | : | 7 | 8 | 9 | / | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| ; | 4 | 5 | 6 | * | | + * |--------+------+------+------+------+------| F14 | | F15 |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | - | Entr | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | . | = | + | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,S(KC_COMM), + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_F14, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TAB, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + S(KC_DOT), KC_COLN, KC_7, KC_8, KC_9, KC_BSLS, KC_F12, + KC_SCLN, KC_4, KC_5, KC_6, KC_ASTR, KC_TRNS, + KC_F15, KC_AMPR, KC_1, KC_2, KC_3, KC_MINS, KC_ENT, + KC_0, KC_DOT, KC_EQL, KC_PLUS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: App Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | CmdQ | CmdW | | | | Stab | | Play | Prev | Next | | |PrtSc | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| VolDn|VolUp | | | | | + * |--------+------+------+------+------+------| | | Mute |------+------+------+------+------+--------| + * | | CmdZ | CmdX | CmdC | CmdY | CtrlC| | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Control +[APP] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LGUI(KC_Q), LGUI(KC_W), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_TAB), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LCTL(KC_C), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, + KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 3: Control Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Pwr | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| Lclk |------| |------| Lft | Down | Up | Right| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | Rclk | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Shift| | | Home | End | + * ,------|------|------| |------+------+------. + * | | | LAtl | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Control +[CNTL] = KEYMAP( + KC_PWR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LSFT, KC_TRNS, + KC_LALT, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_HOME, KC_END, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), + [2] = ACTION_LAYER_TAP_TOGGLE(APP), + [3] = ACTION_LAYER_TAP_TOGGLE(CNTL) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/techtomas/readme.md b/keyboards/ergodox/keymaps/techtomas/readme.md new file mode 100644 index 000000000..36e0591a8 --- /dev/null +++ b/keyboards/ergodox/keymaps/techtomas/readme.md @@ -0,0 +1,57 @@ +# Techtomas Configuration + +## Base Layer + +The base layer is a merge of what I liked with the default layout and the ordinary layout. The thumb cluster is more like the Kinesis advantage and the top row of the cluster is convient for use on the mac. + +* The Caps Lock postion handles [Hyper/Esc](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) +* The Tab key toggles MEH. +* The top vertical mods on the left and right are [ and ]. +* The bottom vertical mods on the left and right are tab and shift+tab +* The HYPER and MEH key are made in the same location on the right side of the board as well. Using Keyboard Maestro for OS X makes one-handed shortcuts very easy. +* Layer switching is focused around the thumb clusters plus some additional locations for convience. + +## Symbol Layer +The symbol layer can be tap/toggled with the bottom right key and also toggled on the thumb clusters. + +The bottom two vertical mods are set to F14 and F15 which is the default for changing screen brightness on the mac + +## App Layer +The app layer is used to control media playback and also some application shortcuts (OS X Focused). +It can be toggled on the left board in the top left corner (tilde/grave) or using your pinky on the right side of the board using either ; or /. +There is one additional toggle on the right thumb cluster for quick access to play and mute key combos. + +### Current App shortcuts defined +* Q = CMD+Q +* W = CMD+W +* Z = CMD+Z +* X = CMD+X +* C = CMD+C +* V = CMD+V +* B = CTRL+C +* P = Print Screen + +## Control Layer +The control layer is meant to help easily navigate and select text. It can also be stacked ontop of the Symbol layer when needed. + +The right arrow key and End key toggle the control layer on the left board. There is also a tap toggle for the layer in the same position on the right side of the board. + +On the left board you have mouse control with left & right click in the location of the G and B keys. +On the right board you have vim-style arrow keys using hjkl + +The left thumb cluster moves shift and alt within easy reach while holding the toggle (end). So far I've found this convient to navigate and skip around text when using the hjkl arrow keys. I found that it was easy to get the alt key stuck on depending on what key you released first so I added the PREVENT_STUCK_MODIFIERS to the config.h to help with that. + +## Changelog + +* May 4th, 2016 (v1.2): + * Moved layer toggles around to match my habbits of typing + * Enabled Prevent Stuck Modifers in my config.h (L3 + Alt on cluster would get stuck) + * Changed media layer to be more like an app layer with some quick shortcuts (mac centric) + * Moved around the base layer arrow keys so mod keys were more accesible + +* Apr 29, 2016 (V1.1): + * Added F14 and F15 to symbol layer + * Added control layer toggle to A key. + +* Apr 28, 2016 (V1.0): + * Modified config based on the default layout plus inspiration from the ordinary layout diff --git a/keyboards/ergodox/keymaps/teckinesis/keymap.c b/keyboards/ergodox/keymaps/teckinesis/keymap.c new file mode 100644 index 000000000..2837874f7 --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/keymap.c @@ -0,0 +1,455 @@ +#include "ergodox.h" +#include "led.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "mousekey.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols layer +#define MDIA 2 // media layer +#define SPEC 3 // special layer + +#define LCaps 10 // left caps-shift key +#define LSymb 11 // left symbol-shift key +#define LMdia 12 // left media-shift key +#define LSpec 13 // left special-shift key +#define RCaps 14 // right caps-shift key +#define RSymb 15 // right symbol-shift key +#define RMdia 16 // right media-shift key +#define RSpec 17 // right special-shift key + +#define MUL 20 // mouse up left +#define MUR 21 // mouse up right +#define MDL 22 // mouse down left +#define MDR 23 // mouse down right + +/* + * teckinesis layout for ErgoDox (EZ) + * + * Modifications from The Ordinary Layout v4 by Will Wolff-Myren willwm@gmail.com + * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com + * + * No rights reserved. This software is in the public domain. + * Credit me if you are friendly but if you're a jerk don't bother. + * + * Details: readme.md + * https://github.com/willwm/qmk_firmware/tree/master/keyboard/ergodox_ez/keymaps/teckinesis + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/******* Base Layer ******************************************************************************************************** + * + * ,------------------------------------------------------. ,------------------------------------------------------. + * | Special =+ | 1 | 2 | 3 | 4 | 5 | ESC | | ` | 6 | 7 | 8 | 9 | 0 | -_ Special | + * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| + * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | + * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| + * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | + * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| + * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | + * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' + * | LCtrl |Meh/\ |Hypr//| LAlt | LGui | | RGui | RAlt |Hypr/[|Meh/] | RCtrl | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Home | End | | Left | Right| + * ,------|------|------| |------+------+------. + * | | | PgUp | | Up | | | + * |Backsp| Del |------| |------| Enter| Space| + * | | | PgDn | | Down | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( +// left hand + F(LSpec),KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC +,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G +,M(LCaps) ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) +,KC_LCTL,MEH_T(KC_BSLS),ALL_T(KC_SLSH),KC_LALT,KC_LGUI + ,KC_HOME,KC_END + ,KC_PGUP + ,KC_BSPC,KC_DEL ,KC_PGDN + // right hand + ,KC_GRV ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,M(RCaps) + ,KC_RGUI,KC_RALT,ALL_T(KC_LBRC),MEH_T(KC_RBRC),KC_RCTL + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_DOWN ,KC_ENT ,KC_SPC + ), + +/******* Symbols Layer ***************************************************************************************************** + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | Esc | | - | F6 | F7 | F8 | F9 | F10 | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | + * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| + * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | LCtrl | Meh |Hyper | LAlt | LGui | |RGui/0|RAlt/.|Hypr/=|Meh/+ |RCtrl/Ent| + * `-----------------------------------' `-------------------------------------' + * ,-------------. ,-------------. + * | Left | Right| | Home | End | + * ,------|------|------| |------+------+------. + * | | | Up | | PgUp | | | + * |Space |Enter |------| |------|BackSp| Del | + * | | | Down | | PgDn | | | + * `--------------------' `--------------------' + */ +[SYMB] = KEYMAP( +// left hand + KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC +,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) +,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV +,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB +,KC_LCTL ,KC_MEH ,KC_HYPR ,KC_LALT ,KC_LGUI + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_SPC ,KC_ENT ,KC_DOWN + // right hand + ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS + ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS + ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS + ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS + ,GUI_T(KC_0),ALT_T(KC_DOT),ALL_T(KC_EQL),MEH_T(KC_PLUS),CTL_T(KC_ENT) + ,KC_HOME ,KC_END + ,KC_PGUP + ,KC_PGDN ,KC_BSPC ,KC_DEL +), + +/******* Media Layer ******************************************************************************************************* + * + * ,---------------------------------------------------------------. ,---------------------------------------------------------------. + * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | + * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| + * | | |MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | | | + * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| + * | | |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | | | + * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| + * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | + * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' + * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| + * `---------------------------------------------' `---------------------------------------------' + * ,-------------. ,-------------. + * | Stop |Refrsh| | Prev | Next | + * ,------|------|------| |------+------+------. + * |Brwser|Brwser|Search| |VolUp | | | + * |Back | Fwd |------| |------| Stop | Play-| + * | | | Home | |VolDn | | Pause| + * `--------------------' `--------------------' + */ +[MDIA] = KEYMAP( +// left hand + KC_TRNS ,KC_F11 ,KC_F12 ,KC_F13 ,KC_F14 ,KC_F15 ,KC_ESC +,KC_TRNS ,KC_NO ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U +,KC_TRNS ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD +,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D +,KC_LCTL ,KC_MEH ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 + ,KC_WSTP ,KC_WREF + ,KC_WSCH + ,KC_WBAK ,KC_NO ,KC_WHOM + // right hand + ,KC_NO ,KC_F16 ,KC_F17 ,KC_F18 ,KC_F19 ,KC_F20 ,KC_TRNS + ,KC_WH_U ,KC_PSCR ,KC_HOME ,KC_UP ,KC_PGUP ,KC_NO ,KC_TRNS + ,KC_NLCK ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_NO ,KC_TRNS + ,KC_WH_D ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_TRNS + ,GUI_T(KC_INS),ALT_T(KC_DEL),KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_MPRV ,KC_MNXT + ,KC_VOLU + ,KC_VOLD ,KC_MSTP ,KC_MPLY +), + +/******* Special Layer ***************************************************************************************************** + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | Esc | | | | | | | | | | | | Bspc | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | |------| |------| | | | | | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | | | | | | | | | | | | | | | RShift | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[SPEC] = KEYMAP( +// left hand + KC_TRNS ,KC_ESC ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS +,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS,KC_TRNS ,KC_TRNS + // right hand + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_BSPC ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_RSFT + ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS + + ,KC_TRNS ,KC_TRNS + ,KC_TRNS + ,KC_TRNS ,KC_TRNS ,KC_TRNS + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + // the faux shift keys are implemented as macro taps + [LCaps] = ACTION_MACRO_TAP(LCaps) + ,[LSymb] = ACTION_MACRO_TAP(LSymb) + ,[LMdia] = ACTION_MACRO_TAP(LMdia) + ,[LSpec] = ACTION_MACRO_TAP(LSpec) + ,[RCaps] = ACTION_MACRO_TAP(RCaps) + ,[RSymb] = ACTION_MACRO_TAP(RSymb) + ,[RMdia] = ACTION_MACRO_TAP(RMdia) + ,[RSpec] = ACTION_MACRO_TAP(RSpec) +}; + +uint16_t caps_shift = 0; +uint16_t symb_shift = 0; +uint16_t mdia_shift = 0; + +bool symb_lock = false; +bool mdia_lock = false; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + // There are two shift keys for each layer so we increment a layer_shift var when one + // is pressed and decrement when one is released. If both are pressed at the same time + // then the layer is locked (or unlocked). The shift counts are bound between 0 and 2 + // only because sometimes rapid pressing led to irregular events; this way the states + // are self healing during use. + + case LCaps: // both caps-shift keys trigger Left Shift + case RCaps: // so they don't interfere with the magic combo + if (record->event.pressed && !record->tap.count) { + if(++caps_shift > 2) caps_shift = 2; + if(caps_shift == 2) { + register_code(KC_CAPS); + unregister_code(KC_CAPS); + } else if(caps_shift == 1) { + register_code(KC_LSFT); + } + } else { + if(--caps_shift < 0) caps_shift = 0; + if(caps_shift == 0) unregister_code(KC_LSFT); + } + break; + + case LSymb: + if (record->event.pressed) { + if(++symb_shift > 2) symb_shift = 2; + if(symb_shift == 2) { + symb_lock = !symb_lock; + } else if(symb_shift == 1) { + layer_on(SYMB); + } + } else { + if(--symb_shift < 0) symb_shift = 0; + if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB); + } + break; + + case LMdia: + if (record->event.pressed) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + register_code(KC_TAB); + } else { + if(++mdia_shift > 2) mdia_shift = 2; + if(mdia_shift == 2) { + mdia_lock = !mdia_lock; + } else if(mdia_shift == 1) { + layer_on(MDIA); + } + } + } else { + if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + unregister_code(KC_TAB); + } else { + if(--mdia_shift < 0) mdia_shift = 0; + if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); + } + } + break; + + case LSpec: + if (record->event.pressed) { + if (record->tap.count && !record->tap.interrupted) { + register_code(KC_EQL); + } else { + layer_on(SPEC); + } + } else { + if(record->tap.count && !record->tap.interrupted) { + unregister_code(KC_EQL); + } else { + layer_off(SPEC); + } + } + break; + + case RSymb: + if (record->event.pressed) { + if (record->tap.count && (!symb_shift) && (!symb_lock)) { + register_code(KC_QUOT); + } else { + if(++symb_shift > 2) symb_shift = 2; + if(symb_shift == 2) { + symb_lock = !symb_lock; + } else if(symb_shift == 1) { + layer_on(SYMB); + } + } + } else { + if(record->tap.count && symb_shift == 0) { + unregister_code(KC_QUOT); + } else { + if(--symb_shift < 0) symb_shift = 0; + if((!symb_shift) && (!symb_lock)) layer_off(SYMB); + } + } + break; + + case RMdia: + if (record->event.pressed) { + if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { + register_code(KC_BSLS); + } else { + if(++mdia_shift > 2) mdia_shift = 2; + if(mdia_shift == 2) { + mdia_lock = !mdia_lock; + } else if(mdia_shift == 1) { + layer_on(MDIA); + } + } + } else { + if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { + unregister_code(KC_BSLS); + } else { + if(--mdia_shift < 0) mdia_shift = 0; + if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); + } + } + break; + + case RSpec: + if (record->event.pressed) { + if (record->tap.count && !record->tap.interrupted) { + register_code(KC_MINS); + } else { + layer_on(SPEC); + } + } else { + if(record->tap.count && !record->tap.interrupted) { + unregister_code(KC_MINS); + } else { + layer_off(SPEC); + } + } + break; + + // mouse diagonals + + case MUL: // mouse up left + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + mousekey_send(); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + mousekey_send(); + } + break; + + case MUR: // mouse up right + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + mousekey_send(); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + mousekey_send(); + } + break; + + case MDL: // mouse down left + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + mousekey_send(); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + mousekey_send(); + } + break; + + case MDR: // mouse down right + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + mousekey_send(); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + mousekey_send(); + } + break; + + default: + // none + break; + } + + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + // shift or caps lock turns on red light + if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) { + ergodox_right_led_1_on(); + } else { + ergodox_right_led_1_off(); + } + + // Symbol layer turns on green light + if(layer_state & (1UL<<SYMB)) { + ergodox_right_led_2_on(); + } else { + ergodox_right_led_2_off(); + } + + // Media layer turns on blue light + if(layer_state & (1UL<<MDIA)) { + ergodox_right_led_3_on(); + } else { + ergodox_right_led_3_off(); + } +}; + diff --git a/keyboards/ergodox/keymaps/teckinesis/ordinary-special.png b/keyboards/ergodox/keymaps/teckinesis/ordinary-special.png Binary files differnew file mode 100644 index 000000000..6eecf447e --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/ordinary-special.png diff --git a/keyboards/ergodox/keymaps/teckinesis/ordinary-special.txt b/keyboards/ergodox/keymaps/teckinesis/ordinary-special.txt new file mode 100644 index 000000000..a08827c6d --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/ordinary-special.txt @@ -0,0 +1,27 @@ +[{x:3.5,a:7},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""], +[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#54d6de"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"], +[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{h:1.5},"",{x:4.5,h:1.5},"",""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], +[{y:-0.375,x:3.5},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{x:6.5},""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{w:1.5},""], +[{y:-0.625,x:6.5,h:1.5},"",{x:4.5,h:1.5},""], +[{y:-0.75,x:3.5},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.875,x:5.5},"",{x:6.5},""], +[{y:-0.875,w:1.5},"","",{x:14.5},"",{c:"#2277ff",w:1.5},"RShift"], +[{y:-0.375,x:3.5,c:"#cccccc"},"",{x:10.5},""], +[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""], +[{y:-0.75,x:0.5},"","",{x:14.5},"",""], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""], +[{h:2},"",{h:2},"",""], +[{x:2},""], +[{r:-30,rx:13,y:-1,x:-3},"",""], +[{x:-3},"",{h:2},"",{h:2},""], +[{x:-3},""] + diff --git a/keyboards/ergodox/keymaps/teckinesis/readme.md b/keyboards/ergodox/keymaps/teckinesis/readme.md new file mode 100644 index 000000000..9494a4d4c --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/readme.md @@ -0,0 +1,45 @@ +# teckinesis Layout + +*A blend of TECK and Kinesis layouts, based on ["The Ordinary Layout" by Nicholas Keene](http://qmk.fm/keyboards/ergodox_ez/keymaps/ordinary/#the-ordinary-layout-a-familiar-and-powerful-layout)* + +I love "The Ordinary Layout", but I still use a [TECK](https://www.trulyergonomic.com/store/index.php) +at the office, and I found the transition back and forth to be a bit more difficult than I expected. + +This layout consists of only slight changes to "The Ordinary Layout" based on the layouts of the +[(original) TECK Model 209](https://www.trulyergonomic.com/store/layout-designer--configurator--reprogrammable--truly-ergonomic-mechanical-keyboard/#KTo7PD0+P0BBQkNERUw5394rNR4fICEi4yMkJSYnLS4xOBQaCBUXTBwYDBITLzDhBBYHCQorCw0ODzPl4B0bBhkFKhEQNjc05OPiSktOTSwoLFBSUU/mZQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAX2BhAFZXAAAAAAAAAAAAXF1eVAAAAAAAAAAAAABZWltVAAAAAAAAAAAAYgBjAAAAAAAAAAAAWFcAAAAAAACTAQAMAiMBAAwBigEADAIhAQAMAZQBAAwBkgEADAGDAQAMALYBAAwAzQEADAC1AQAMAOIBAAwA6gEADADpAQAMALhJAEYAAAAAAEitR64AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACk6Ozw9Pj9AQUJDREVMOd/eKzUeHyAhIuMjJCUmJy0uMTgUGggVF0wcGAwSEy8w4QQWBwkKKwsNDg8z5eMdGwYZBSoREDY3NOfg4kpLTk0sKCxQUlFP5uQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAF9gYQBWVwAAAAAAAAAAAFxdXlQAAAAAAAAAAAAAWVpbVQAAAAAAAAAAAGIAYwAAAAAAAAAAAFhXAAAAAAAAkwEADAIjAQAMAYoBAAwCIQEADAGUAQAMAZIBAAwBgwEADAC2AQAMAM0BAAwAtQEADADiAQAMAOoBAAwA6QEADAC4SQBGAAAAAABIrUeuAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=) and +the [Kinesis Advantage](http://www.kinesis-ergo.com/wp-content/uploads/2013/06/advantage_layout_win.pdf) + +## The Base Layout ## + +[teckinesis (Base Layer)](http://www.keyboard-layout-editor.com/#/gists/befd4c5800d92114aa9e50d4f7c0dfb0) + + +### Changes from The Ordinary Layout ### + +* Moved KC_MINS from the key left of the 6 to the RSpec key. +* Moved KC_EQL from RSpec to LSpec. +* Moved KC_GRV from LSpec to the key left of the 6. +* Mdded KC_BSLS to the left Meh key. +* Added KC_SLSH to the left Hyper key. +* Added KC_LBRC to the right Hyper key. +* Added KC_RBRC to the right Meh key. + +## The Symbols Layer ## + +[teckinesis (Symbols Layer)](http://www.keyboard-layout-editor.com/#/gists/e6ddc4e9e0d194b3e52ac0616238ab61) + + +### Changes from The Ordinary Layout ### + +* None. + +## The Media Layer ## + +[teckinesis (Media Layer)](http://www.keyboard-layout-editor.com/#/gists/41ff65e6a7c490211fd6702fb34d9908) + + +### Changes from The Ordinary Layout ### + +* Removed Power, Sleep, Mail, My Computer keys. +(I kept hitting these while using the mouse/cursor. =P) + diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.json b/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.json new file mode 100644 index 000000000..69fe28cf7 --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.json @@ -0,0 +1,434 @@ +[ + { + "name": "teckinesis (Base Layer)", + "author": "Will Wolff-Myren", + "notes": "# teckinesis Layout # \r\n\r\n*A blend of TECK and Kinesis layouts, based on [\"The Ordinary Layout\" by Nicholas Keene](http://qmk.fm/keyboards/ergodox_ez/keymaps/ordinary/#the-ordinary-layout-a-familiar-and-powerful-layout)*\r\n\r\n## The Base Layout ##\r\n\r\n\r\n\r\n## The Symbols Layer ##\r\n\r\n\r\n\r\n## The Media Layer ##\r\n\r\n(placeholder)\r\n", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea" + }, + [ + { + "x": 3.5 + }, + "#\n3", + { + "x": 10.5 + }, + "*\n8" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "@\n2", + { + "x": 1 + }, + "$\n4", + { + "x": 8.5 + }, + "&\n7", + { + "x": 1 + }, + "(\n9" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "%\n5", + { + "c": "#ff4444" + }, + "Esc", + { + "x": 4.5, + "c": "#cccccc" + }, + "~\n`", + "^\n6" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Special\n\n+\n\n\n\nShift\n=", + { + "c": "#cccccc" + }, + "!\n1", + { + "x": 14.5 + }, + ")\n0", + { + "c": "#2277ff", + "w": 1.5 + }, + "_\n\nSpecial\n\n\n\n-\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#cccccc" + }, + "E", + { + "x": 10.5 + }, + "I" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "W", + { + "x": 1 + }, + "R", + { + "x": 8.5 + }, + "U", + { + "x": 1 + }, + "O" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "T", + { + "h": 1.5 + }, + "{\n\n\n\n\n\n[", + { + "x": 4.5, + "h": 1.5 + }, + "}\n\n\n\n\n\n]", + "Y" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "fa": [ + 0, + 0, + 4 + ], + "w": 1.5 + }, + "Media\n\n<i class='kb kb-Line-Start-End'></i>\n\n\n\nShift", + { + "c": "#cccccc" + }, + "Q", + { + "x": 14.5 + }, + "P", + { + "c": "#2277ff", + "f": 3, + "w": 1.5 + }, + "|\n\\\nMedia\n\n\n\n\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#cccccc" + }, + "D", + { + "x": 10.5 + }, + "K" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "S", + { + "x": 1 + }, + "F", + { + "x": 8.5 + }, + "J", + { + "x": 1 + }, + "L" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "G", + { + "x": 6.5 + }, + "H" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Symbols\n\n\n\n\n\nShift", + { + "c": "#cccccc" + }, + "A", + { + "x": 14.5 + }, + ":\n;", + { + "c": "#2277ff", + "f": 3, + "w": 1.5 + }, + "\"\n'\nSymbols\n\n\n\n\nShift" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#54d6de", + "fa": [ + 0, + 0, + 4, + 1 + ], + "h": 1.5 + }, + "< Tab\n\n\nShift Tab", + { + "x": 4.5, + "h": 1.5 + }, + "Tab >\n\n\nTab" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#cccccc" + }, + "C", + { + "x": 10.5 + }, + "<\n," + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "X", + { + "x": 1 + }, + "V", + { + "x": 8.5 + }, + "M", + { + "x": 1 + }, + ">\n." + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "B", + { + "x": 6.5 + }, + "N" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Capitals\n\n\n\n\n\nShift", + { + "c": "#cccccc" + }, + "Z", + { + "x": 14.5 + }, + "?\n/", + { + "c": "#2277ff", + "f": 3, + "w": 1.5 + }, + "\n\nCapitals\n\n\n\n\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#77aaff", + "fa": [ + 5, + 0, + 4, + 1 + ] + }, + "<i class='mss mss-Unicode-Option-3'></i>\n\n\nLAlt", + { + "x": 10.5 + }, + "<i class='mss mss-Unicode-Option-3'></i>\n\n\nRAlt" + ], + [ + { + "y": -0.875, + "x": 2.5, + "fa": [ + 5, + 1 + ] + }, + "\nHyper\n?\n/", + { + "x": 1, + "fa": [ + 5, + 1, + 0, + 1 + ] + }, + "<i class='mss mss-Unicode-Command-3'></i>\n\n\nSuper", + { + "x": 8.5 + }, + "<i class='mss mss-Unicode-Command-3'></i>\n\n\nSuper", + { + "x": 1, + "fa": [ + 0, + 0, + 0, + 1 + ] + }, + "{\n[\n\nHyper" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "Ctrl\n\n\nLCtrl", + { + "f2": 1 + }, + "\nMeh\n|\n\\", + { + "x": 14.5, + "fa": [ + 0, + 0, + 1, + 1 + ] + }, + "}\n]\n\nMeh", + "Ctrl\n\n\nRCtrl" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#54d6de" + }, + "Home", + "End" + ], + [ + { + "h": 2 + }, + "< Del\n\n\nBackspace", + { + "h": 2 + }, + "Del >\n\n\nDelete", + "Page\n\n\n\n\n\nUp" + ], + [ + { + "x": 2 + }, + "Page\n\n\n\n\n\nDown" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3 + }, + "Left", + "Right" + ], + [ + { + "x": -3 + }, + "Up", + { + "h": 2 + }, + "Enter", + { + "h": 2 + }, + "Space" + ], + [ + { + "x": -3 + }, + "Down" + ] +]
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.png b/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.png Binary files differnew file mode 100644 index 000000000..7c4584e9f --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-base.png diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.json b/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.json new file mode 100644 index 000000000..65fe394e8 --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.json @@ -0,0 +1,436 @@ +[ + { + "name": "teckinesis (MediaLayer)", + "author": "Will Wolff-Myren", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea" + }, + [ + { + "x": 3.5, + "c": "#99de2a" + }, + "F13", + { + "x": 10.5 + }, + "F18" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "F12", + { + "x": 1 + }, + "F14", + { + "x": 8.5 + }, + "F17", + { + "x": 1 + }, + "F19" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "F15", + { + "c": "#ff4444" + }, + "Esc", + { + "x": 4.5 + }, + "Esc", + { + "c": "#99de2a" + }, + "F16" + ], + [ + { + "y": -0.875, + "x": 1.5 + }, + "F11", + { + "x": 14.5 + }, + "F20" + ], + [ + { + "y": -0.995, + "c": "#000000", + "t": "#ff0000", + "w": 1.5 + }, + "Media\n\n\n\n\n\nShift", + { + "x": 16.5, + "w": 1.5 + }, + "\n\nMedia\n\n\n\n\nShift" + ], + [ + { + "y": -0.3799999999999999, + "x": 3.5, + "c": "#ff8500", + "t": "#000000" + }, + "Mouse\n\n\n\n\n\nUp", + { + "x": 10.5 + }, + "Cursor\n\n\n\n\n\nUp" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "Mouse\n\n\n\n\n\nUpLeft", + { + "x": 1 + }, + "Mouse\n\n\n\n\n\nUpRgt", + { + "x": 8.5, + "c": "#ffb063" + }, + "Home", + { + "x": 1 + }, + "Page\n\n\n\n\n\nUp" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#e6e067" + }, + "Vol\n\n\n\n\n\nUp", + { + "c": "#ffb063", + "h": 1.5 + }, + "Scroll\n\n\n\n\n\nUp", + { + "x": 4.5, + "h": 1.5 + }, + "Scroll\n\n\n\n\n\nUp", + { + "c": "#e6e067" + }, + "Print\n\n\n\n\n\nScreen" + ], + [ + { + "y": -0.875, + "x": 1.5, + "c": "#737373", + "a": 7 + }, + "", + { + "x": 14.5 + }, + "" + ], + [ + { + "y": -0.9950000000000001, + "c": "#2277ff", + "a": 4, + "w": 1.5 + }, + "Symbols\n\n\n\n\n\nShift", + { + "x": 16.5, + "w": 1.5 + }, + "\n\nSymbols\n\n\n\n\nShift" + ], + [ + { + "y": -0.3799999999999999, + "x": 3.5, + "c": "#ff8500" + }, + "Mouse\n\n\n\n\n\nDown", + { + "x": 10.5 + }, + "Cursor\n\n\n\n\n\nDown" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "Mouse\n\n\n\n\n\nLeft", + { + "x": 1 + }, + "Mouse\n\n\n\n\n\nRight", + { + "x": 8.5 + }, + "Cursor\n\n\n\n\n\nLeft", + { + "x": 1 + }, + "Cursor\n\n\n\n\n\nRight" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#e6e067" + }, + "Vol\n\n\n\n\n\nDown", + { + "x": 6.5 + }, + "Num\n\n\n\n\n\nLock" + ], + [ + { + "y": -0.875, + "x": 1.5, + "c": "#737373", + "a": 7 + }, + "", + { + "x": 14.5 + }, + "" + ], + [ + { + "y": -0.9950000000000001, + "c": "#2277ff", + "a": 4, + "w": 1.5 + }, + "Capitals\n\n\n\n\n\nShift", + { + "x": 16.5, + "w": 1.5 + }, + "\n\nCapitals\n\n\n\n\nShift" + ], + [ + { + "y": -0.6299999999999999, + "x": 6.5, + "c": "#ffb063", + "h": 1.5 + }, + "Scroll\n\n\n\n\n\nDown", + { + "x": 4.5, + "h": 1.5 + }, + "Scroll\n\n\n\n\n\nDown" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#ff8500" + }, + "Mouse\n\n\n\n\n\nDown", + { + "x": 10.5 + }, + "Cursor\n\n\n\n\n\nDown" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "Mouse\n\n\n\n\n\nDnLeft", + { + "x": 1 + }, + "Mouse\n\n\n\n\n\nDnRgt", + { + "x": 8.5, + "c": "#ffb063" + }, + "End", + { + "x": 1 + }, + "Page\n\n\n\n\n\nDown" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#e6e067" + }, + "Mute", + { + "x": 6.5, + "c": "#737373", + "a": 7 + }, + "" + ], + [ + { + "y": -0.875, + "x": 1.5 + }, + "", + { + "x": 14.5 + }, + "" + ], + [ + { + "y": -0.9950000000000001, + "c": "#2277ff", + "a": 4, + "w": 1.5 + }, + "Ctrl", + { + "x": 16.5, + "w": 1.5 + }, + "Ctrl" + ], + [ + { + "y": -0.3799999999999999, + "x": 3.5, + "c": "#ff8500" + }, + "Middle\n\n\n\n\n\nClick", + { + "x": 10.5, + "c": "#ffb063", + "fa": [ + 0, + 0, + 0, + 1 + ] + }, + "Delete\n\n\nOption" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#ff8500" + }, + "Left\n\n\n\n\n\nClick", + { + "x": 1 + }, + "Right\n\n\n\n\n\nClick", + { + "x": 8.5, + "c": "#ffb063" + }, + "Insert\n\n\nCmd", + { + "x": 1, + "c": "#77aaff" + }, + "Hyper" + ], + [ + { + "y": -0.75, + "x": 0.5 + }, + "Alt\n\n\nLAlt", + "Meh", + { + "x": 14.5 + }, + "Meh", + "Alt\n\n\nRAlt" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#ccbb00" + }, + "Stop\n\n\nBrowser", + "Reload\n\n\nBrowser" + ], + [ + { + "h": 2 + }, + "< Web\n\n\nBrowser", + { + "h": 2 + }, + "Web >\n\n\nBrowser", + "Search\n\n\nBrowser" + ], + [ + { + "x": 2 + }, + "Home\n\n\nBrowser" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3 + }, + "Prev\n\n\nAudio\n\n\nTrack", + "Next\n\n\nAudio\n\n\nTrack" + ], + [ + { + "x": -3, + "c": "#e6e067" + }, + "Vol\n\n\n\n\n\nUp", + { + "c": "#ccbb00", + "h": 2 + }, + "Stop\n\n\nAudio", + { + "h": 2 + }, + "Play\n\n\nAudio\n\n\nPause" + ], + [ + { + "x": -3, + "c": "#e6e067" + }, + "Vol\n\n\n\n\n\nDown" + ] +]
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.png b/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.png Binary files differnew file mode 100644 index 000000000..cc51605f9 --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-media.png diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.json b/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.json new file mode 100644 index 000000000..439d0128e --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.json @@ -0,0 +1,422 @@ +[ + { + "name": "teckinesis (Symbol Layer)", + "author": "Will Wolff-Myren", + "switchMount": "cherry", + "switchBrand": "gateron", + "switchType": "KS-3-Tea" + }, + [ + { + "x": 3.5, + "c": "#99de2a" + }, + "F3", + { + "x": 10.5 + }, + "F8" + ], + [ + { + "y": -0.875, + "x": 2.5 + }, + "F2", + { + "x": 1 + }, + "F4", + { + "x": 8.5 + }, + "F7", + { + "x": 1 + }, + "F9" + ], + [ + { + "y": -0.875, + "x": 5.5 + }, + "F5", + { + "c": "#ff4444" + }, + "Esc", + { + "x": 4.5, + "c": "#bbddbb" + }, + "_\n\n\n\n\n\n-", + { + "c": "#99de2a" + }, + "F6" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Special\n\n\n\n\n\nShift", + { + "c": "#99de2a" + }, + "F1", + { + "x": 14.5 + }, + "F10", + { + "c": "#2277ff", + "w": 1.5 + }, + "\n\nSpecial\n\n\n\n\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#bbddbb" + }, + "{", + { + "x": 10.5, + "c": "#89b087" + }, + "8" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bbddbb" + }, + "@", + { + "x": 1 + }, + "}", + { + "x": 8.5, + "c": "#89b087" + }, + "7", + { + "x": 1 + }, + "9" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#bbddbb" + }, + "&", + { + "h": 1.5 + }, + "<", + { + "x": 4.5, + "h": 1.5 + }, + ">", + "|" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Media\n\n\n\n\n\nShift", + { + "c": "#bbddbb" + }, + "!", + { + "x": 14.5, + "c": "#89b087" + }, + "/", + { + "c": "#2277ff", + "w": 1.5 + }, + "\n\nMedia\n\n\n\n\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#bbddbb" + }, + "(", + { + "x": 10.5, + "c": "#89b087" + }, + "5" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bbddbb" + }, + "$", + { + "x": 1 + }, + ")", + { + "x": 8.5, + "c": "#89b087" + }, + "4", + { + "x": 1 + }, + "6" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#bbddbb" + }, + "`", + { + "x": 6.5 + }, + "/" + ], + [ + { + "y": -0.875, + "c": "#000000", + "t": "#ff0000", + "w": 1.5 + }, + "Symbols\n\n\n\n\n\nShift", + { + "c": "#bbddbb", + "t": "#000000" + }, + "#", + { + "x": 14.5, + "c": "#89b087" + }, + "*", + { + "c": "#000000", + "t": "#ff0000", + "w": 1.5 + }, + "\n\nSymbols\n\n\n\n\nShift" + ], + [ + { + "y": -0.625, + "x": 6.5, + "c": "#54d6de", + "t": "#000000", + "fa": [ + 0, + 0, + 0, + 1 + ], + "h": 1.5 + }, + "Tab >\n\n\nTab", + { + "x": 4.5, + "h": 1.5 + }, + "< Tab\n\n\nShift Tab" + ], + [ + { + "y": -0.75, + "x": 3.5, + "c": "#bbddbb" + }, + "[", + { + "x": 10.5, + "c": "#89b087" + }, + "2" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#bbddbb" + }, + "^", + { + "x": 1 + }, + "]", + { + "x": 8.5, + "c": "#89b087" + }, + "1", + { + "x": 1 + }, + "3" + ], + [ + { + "y": -0.875, + "x": 5.5, + "c": "#bbddbb" + }, + "~", + { + "x": 6.5 + }, + "\\" + ], + [ + { + "y": -0.875, + "c": "#2277ff", + "w": 1.5 + }, + "Capitals\n\n\n\n\n\nShift", + { + "c": "#bbddbb" + }, + "%", + { + "x": 14.5, + "c": "#89b087" + }, + "-", + { + "c": "#2277ff", + "w": 1.5 + }, + "\n\nCapitals\n\n\n\n\nShift" + ], + [ + { + "y": -0.375, + "x": 3.5, + "c": "#77aaff" + }, + "<i class='mss mss-Unicode-Option-3'></i>\n\n\nLAlt", + { + "x": 10.5, + "c": "#89b087" + }, + ".\n\n\nOption" + ], + [ + { + "y": -0.875, + "x": 2.5, + "c": "#77aaff" + }, + "Hyper", + { + "x": 1 + }, + "<i class='mss mss-Unicode-Command-3'></i>\n\n\nSuper", + { + "x": 8.5, + "c": "#89b087" + }, + "0\n\n\nCmd", + { + "x": 1 + }, + "=\n\n\nHyper" + ], + [ + { + "y": -0.75, + "x": 0.5, + "c": "#77aaff" + }, + "Ctrl\n\n\nLCtrl", + "Meh", + { + "x": 14.5, + "c": "#89b087" + }, + "+\n\n\nMeh", + "Enter\n\n\nCtrl" + ], + [ + { + "r": 30, + "rx": 6.5, + "ry": 4.25, + "y": -1, + "x": 1, + "c": "#54d6de" + }, + "Left", + "Right" + ], + [ + { + "h": 2 + }, + "Space", + { + "h": 2 + }, + "Enter", + "Up" + ], + [ + { + "x": 2 + }, + "Down" + ], + [ + { + "r": -30, + "rx": 13, + "y": -1, + "x": -3 + }, + "Home", + "End" + ], + [ + { + "x": -3 + }, + "Page\n\n\n\n\n\nUp", + { + "h": 2 + }, + "< Del\n\n\nBackspace", + { + "h": 2 + }, + "Del >\n\n\nDelete" + ], + [ + { + "x": -3 + }, + "Page\n\n\n\n\n\nDown" + ] +]
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.png b/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.png Binary files differnew file mode 100644 index 000000000..7ca86cf47 --- /dev/null +++ b/keyboards/ergodox/keymaps/teckinesis/teckinesis-symbol.png diff --git a/keyboards/ergodox/keymaps/tkuichooseyou/README.md b/keyboards/ergodox/keymaps/tkuichooseyou/README.md new file mode 100644 index 000000000..ab02fac2c --- /dev/null +++ b/keyboards/ergodox/keymaps/tkuichooseyou/README.md @@ -0,0 +1,13 @@ +# Based on Default OSX +I'm a vim and OSX user + +- Moved Hyper and Meh up, replaced with CMD + - Because I'm used to having symmetrical CMD keys on both hands +- Changed left delete to Tab to match OSX +- Changed left Backspace to CTRL/ESC for vim +- Changed top left and top right arrow to `CMD+{` and `CMD+}` + - Useful for switching tabs in Safari, Xcode, etc. +- Remove the Ctrl from Z and / +- Remove CMD from right quote +- Changed right Alt to Delete + diff --git a/keyboards/ergodox/keymaps/tkuichooseyou/compiled.hex b/keyboards/ergodox/keymaps/tkuichooseyou/compiled.hex new file mode 100644 index 000000000..a8cf4527a --- /dev/null +++ b/keyboards/ergodox/keymaps/tkuichooseyou/compiled.hex @@ -0,0 +1,1137 @@ +:100000000C947B020C94C2020C94C2020C94C202A7
+:100010000C94C2020C94C2020C94C2020C94C20250
+:100020000C94C2020C94C2020C94F70D0C94C90EED
+:100030000C94C2020C94C2020C94C2020C94C20230
+:100040000C94C2020C9486210C94C2020C94C2023D
+:100050000C94C2020C94681C0C94C2020C94C20250
+:100060000C94C2020C94C2020C94C2020C94C20200
+:100070000C94C2020C94C2020C94C2020C94C202F0
+:100080000C94C2020C94C2020C94C2020C94C202E0
+:100090000C94C2020C94C2020C94C2020C94C202D0
+:1000A0000C94C2020C94C2020C94C202360F580F78
+:1000B0004610580F46109D0FC00F461015102810FF
+:1000C000F712F712261326135C137C13AD14AD142C
+:1000D0008713AD14371437149E14AD14AD14A71440
+:1000E0004414441444144414441444144414441450
+:1000F0004414441444144414441444144414441440
+:10010000561463146A1471147B140000F0A12E00BD
+:100110002B002961E100354100001E00140004009D
+:100120001D0034004D001F001A0016001B00E104E2
+:100130002A00200008000700060050002C002100C3
+:100140001500090019004F004A00220017000A009C
+:100150000500000065642F0A006F0000E300000046
+:10016000E300300A00670000E30000004C002300B9
+:100170001C000B00110000002961240018000D0074
+:10018000100052004B0025000C000E0036005100FC
+:100190002800260012000F0037002F002B00270038
+:1001A00013003342380030004E002D00310034007F
+:1001B000E500C10000000100010001000100010094
+:1001C00000003A001E0220022202010001003B0052
+:1001D0001F0221022302010001003C002F0226021F
+:1001E0002F00010001003D00300227023000010015
+:1001F00001003E003102350035020000010001001F
+:1002000001000000010000000100010001000000E9
+:100210000100000001003F005200510024020000D4
+:1002200001004000240021001E00010001004100E7
+:10023000250022001F003700010042002600230095
+:10024000200027000100430025022E0231002E006D
+:100250000100440045000100010001000000010010
+:100260000100010001000100000001000100010087
+:1002700001000100010001000100F2000100010085
+:1002800001000100F000F1000100F4000100010094
+:100290000100F3000100F500010001000100010070
+:1002A0000100000001000100010000000100000049
+:1002B0000100010001000000010000000100010038
+:1002C0000100010001000000010001000100010027
+:1002D0000100A9000100010001000100AC00AA001A
+:1002E000B600010001000100AB00A8000100010000
+:1002F0000100010001000100010001000100AE0049
+:1003000001000100000016034500720067006F0045
+:1003100044006F007800200045005A0000001603DA
+:100320004500720067006F0044006F0078002000F5
+:1003300045005A0000000403090409026D0004018D
+:1003400000A0FA09040000010301010009211101C4
+:1003500000012240000705810308000A090401008A
+:100360000103010200092111010001224D000705CE
+:10037000820308000A0904020001030000000921A9
+:10038000110100012236000705830308000A090451
+:1003900003000103000000092111010001223900BE
+:1003A000070584031000011201100100000008ED90
+:1003B000FE071301000102000105010906A1010564
+:1003C0000719E029E7150025019508750181020547
+:1003D000081901290595057501910295017503918B
+:1003E0000105071900297715002501957875018108
+:1003F00002C005010980A101850216010026B7008F
+:100400001A01002AB700751095018100C0050C097A
+:1004100001A1018503160100269C021A01002A9CF5
+:1004200002751095018100C005010902A1010901B1
+:10043000A10005091901290515002501950575017A
+:10044000810295017503810105010930093115818A
+:10045000257F95027508810609381581257F95014C
+:1004600075088106050C0A38021581257F950175EE
+:10047000088106C0C005010906A101050719E02988
+:10048000E715002501950875018102950175088120
+:100490000105081901290595057501910295017558
+:1004A0000391010507190029FF150026FF00950695
+:1004B00075088100C000000000000000000000007E
+:1004C000010204060A0F17202C3A4A5D71879DB37A
+:1004D000C7DAE9F5FCFFFCF5E9DAC7B39D87715D82
+:1004E0004A3A2C20170F0A060402010000000000FF
+:1004F00000000000000011241FBECFEFDAE0DEBFD5
+:10050000CDBF04B603FE27C0809101029091020284
+:10051000A0910302B09104028730904BA740B04BEA
+:10052000D1F4109201021092020210920302109272
+:10053000040214BE84B7877F84BF0FB6F894A895D1
+:1005400080916000886180936000109260000FBE0F
+:10055000E0E0FFE3099511E0A0E0B1E0E6EBF6E4AE
+:1005600002C005900D92A433B107D9F712E0A4E3BD
+:10057000B1E001C01D92A130B107E1F70E943C0B30
+:100580000C9459230C9400001092B9008AE08093D7
+:10059000B800089594EA9093BC009091BC0097FF36
+:1005A000FCCF9091B900987F983021F0903111F0F4
+:1005B00081E008958093BB0084E88093BC00809123
+:1005C000BC0087FFFCCF8091B900887F883111F093
+:1005D000803471F780E0089584E98093BC008091B5
+:1005E000BC0084FDFCCF08958093BB0084E8809319
+:1005F000BC008091BC0087FFFCCF9091B900987F30
+:1006000081E0983209F480E0089584E88093BC008A
+:100610008091BC0087FFFCCF8091BB00089580B320
+:100620008C7080BB81B3836F81BB08958091010181
+:10063000811115C080E40E94CA02809301018111DA
+:100640000CC082E10E94F40280930101811105C077
+:100650008FEF0E94F402809301010E94EC0284B1AA
+:10066000807F84B985B1807F85B98AB1837F8AB95B
+:100670008BB1837F8BB93E98469808950E94E00421
+:10068000809301010E9416030E940F03A5E3B1E0CD
+:10069000E3E4F1E08EE08E0F11921D928E13FCCFF9
+:1006A0000C94CA040E94E004809301010E94160386
+:1006B0000E940F03A5E3B1E0E3E4F1E08EE08E0FCA
+:1006C00011921D928E13FCCF0895BF92CF92DF92AC
+:1006D000EF92FF920F931F93CF93DF9380910101CD
+:1006E000882379F0809134018F5F809334018111E8
+:1006F00008C00E94E00480930101811102C00E94A1
+:10070000720405E311E0C0E0D0E0DD24D39482E080
+:10071000C82EEE24E394F12CC730D10500F580916A
+:100720000101811164C080E40E94CA02809301012A
+:10073000811112C082E10E94F402809301018111B3
+:100740000BC0C7010C2E01C0880F0A94EAF78095F0
+:100750000E94F402809301010E94EC0248C0CA305A
+:10076000A1F028F4C83059F0C93061F005C0CC3090
+:1007700089F070F0CD3089F0209A289810C0219A25
+:1007800029980DC0229A2A980AC0239A2B9807C04C
+:10079000529A01C0539A5B9802C03E9A469890EADA
+:1007A0009A95F1F79FB1799902C082E001C080E08B
+:1007B00091709D25982B7C9902C084E001C080E057
+:1007C000892B7D9902C038E001C030E0832B7E99EF
+:1007D00002C020E101C020E0822B9FB19095991FBB
+:1007E0009927991F9295990F907E892B0FC0809120
+:1007F0000101811149C080E40E94CA028093010175
+:10080000882379F1B12C0E94EC028B2DF8019081A4
+:10081000981719F08083C09200010E941603219658
+:100820000F5F1F4FCE30D10509F076CF80910001C8
+:10083000882361F1815080930001882339F08FE98A
+:100840009FE00197F1F700C0000020C0A3E4B1E0F1
+:10085000E5E3F1E0CF01825F91919D938E13FCCF90
+:1008600015C083E10E94F402809301018111CACF77
+:1008700081E40E94CA02809301018111C3CF0E94CA
+:100880000503B82EB094BFCF80E0C0CF0E947004A3
+:1008900081E0DF91CF911F910F91FF90EF90DF905A
+:1008A000CF90BF900895E82FF0E0ED5BFE4F808180
+:1008B000089508950F931F93CF93DF93C3E4D1E07E
+:1008C00010E00C2F025F899190E00E948C1B180FA2
+:1008D0000C13F9CF812FDF91CF911F910F910895C4
+:1008E0000C94400556985E9825982D9826982E9839
+:1008F00027982F988FEF90E090938900809388003D
+:1009000090938B0080938A0090938D0080938C004D
+:10091000259A2D9A2FEF80E792E021508040904059
+:10092000E1F700C00000269A2E9A2FEF80E792E0B0
+:10093000215080409040E1F700C00000279A2F9A94
+:100940002FEF80E792E0215080409040E1F700C017
+:10095000000025982D982FEF80E792E021508040ED
+:100960009040E1F700C0000026982E982FEF80E716
+:1009700092E0215080409040E1F700C000002798AD
+:100980002F9856985E9825982D9826982E982798F7
+:100990002F98089589EA8093800089E080938100F0
+:1009A00024982C983F988AB18F748AB96E98479A88
+:1009B0008BB1806B8BB9769A0E9472040C943F05C0
+:1009C00080E2809301018091510181110EC00E944B
+:1009D000C40281E0809351012FEF83ED90E3215019
+:1009E00080409040E1F700C0000080E40E94CA020D
+:1009F0008093010181112EC00E94F40280930101B5
+:100A0000811128C00E94F40280930101811122C04B
+:100A10008FE30E94F4028093010181111BC00E94A8
+:100A2000EC0280E40E94CA0280930101811112C08D
+:100A30008CE00E94F4028093010181110BC00E949E
+:100A4000F40280930101811105C08FE30E94F4023A
+:100A5000809301010E94EC028091010108956111CF
+:100A60000BC0FC018281882321F085EE0E949B113E
+:100A700003C085EE0E94631280E090E0089508951F
+:100A80006091C2017091C3018091C4019091C50130
+:100A90000E94981B56985E9825982D9826982E9817
+:100AA00027982F98813019F0823021F00895259AE7
+:100AB0002D9A0895269A2E9A089581E0089581E04E
+:100AC00008950C945F050895282F882339F090E04D
+:100AD0002A3010F44D9608950697089587E290E025
+:100AE0000895AF92BF92DF92EF92FF920F931F9300
+:100AF000CF93DF938C01FC01C081D181CE010E9494
+:100B0000111ABE010E94E908EC01B8010E946105BA
+:100B1000882309F4D1C1F8018281882309F4C6C071
+:100B200080916201811127C0C431F0E7DF0709F02D
+:100B3000BDC10E94630581E0809362010E94321C66
+:100B400090936101809360011092550110925701BA
+:100B500010925601109259011092580110925B01A7
+:100B600010925A0110925D0110925C0110925F0187
+:100B700010925E01A1C180916001909161010E947B
+:100B80003E1C883C910570F480915501E82FF0E0FF
+:100B9000EE0FFF1FEA5AFE4FD183C0838F5F809311
+:100BA00055018AC1C13020E8D20708F451C0F801CC
+:100BB0008281882309F47EC05E01E894B7F88091B1
+:100BC0005401813079F050F08230C1F482EE0E94FD
+:100BD0009B1187E50E949B1187E50EC082EE0E9463
+:100BE0009B110CC080EE0E949B1181EE0E949B1114
+:100BF00088E10E949B1188E10E9463128CE0E82E3C
+:100C0000F12CC5010E2C02C0969587950A94E2F747
+:100C10008F700E946405D82E0E949B118D2D0E941A
+:100C20006312F4E0EF1AF1082CEFE2162FEFF20650
+:100C300041F780915401813029F010F0823041F465
+:100C400082EE04C080EE0E94631281EE0E94631265
+:100C5000C43180E7D80768F4C23090E7D90708F0BC
+:100C600046C0C115E0E7DE0771F0C130D047A1F101
+:100C70000CC1C33320E7D20709F4D8C0C433D0472E
+:100C800009F4EBC002C1F8018281882309F402C192
+:100C90000E941815FFEF24E38CE0F15020408040C3
+:100CA000E1F700C000000E948D1C06C1C13080E841
+:100CB000D80770F2C43120E7D20708F0B3C0C230C1
+:100CC00080E7D807A0F4C11590E7D90709F4E2C07E
+:100CD000C130D04709F0D9C0F8018281882309F4D6
+:100CE000D9C08091DF0181608093DF01E5C0F80108
+:100CF0008281882309F4CEC00E94E71C811102C0C2
+:100D00000E94CD1C0E94FA1C90E09093F301809306
+:100D1000F201C230F0E7DF0721F48091F201816037
+:100D20007AC0C33020E7D20721F48091F2018260BB
+:100D300072C0C43080E7D80721F48091F20184604A
+:100D40006AC0C53090E7D90719F48091F20127C035
+:100D5000C630E0E7DE0721F48091F20180615BC0DC
+:100D6000C730F0E7DF0721F48091F201806253C0C1
+:100D7000C83020E7D20721F48091F20180644BC093
+:100D8000C93080E7D80721F48091F201806843C020
+:100D9000CA3090E7D90729F48091F2018460886015
+:100DA0003AC0CB30E0E7DE0721F48091F2018E7F7C
+:100DB00032C0CC30F0E7DF0721F48091F2018D7F63
+:100DC0002AC0CD3020E7D20721F48091F2018B7F39
+:100DD00022C0CE3080E7D80719F48091F2011AC002
+:100DE0008091F201CF3090E7D90711F48F7E13C0C4
+:100DF000C031E0E7DE0711F48F7D0DC0C131F0E7AF
+:100E0000DF0711F48F7B07C0C231D04711F48F7711
+:100E100002C08B7F877F8093F2018091F2010E9454
+:100E2000FE1C4AC0C333F0E7DF07A1F4F80182815A
+:100E3000882321F01092520182E016C08091520165
+:100E4000811106C086E20E949B1186E20E94631215
+:100E500082E018C0C433D047C1F4F80182818823EE
+:100E600031F01092530180E20E94B21225C08091AD
+:100E70005301811106C087E20E949B1187E20E9404
+:100E8000631280E20E94B91217C081E08093520180
+:100E900080935301C801DF91CF911F910F91FF9073
+:100EA000EF90DF90BF90AF900C945D05C130F0E8FB
+:100EB000DF0708F081CECCCE80E0DF91CF911F918B
+:100EC0000F91FF90EF90DF90BF90AF90089526E0D4
+:100ED000729FF001112444E5849FE00DF11D11245F
+:100EE000E60FF11DEE0FFF1FE25FFE4F859194911B
+:100EF0000E94FB08811560E49607B0F5811570E348
+:100F0000970708F0DEC0803E9105D8F4803C91053B
+:100F100008F06CC0883A910578F4853A910508F09C
+:100F20006BC08130910509F452C108F40FC18430BF
+:100F3000910508F04CC10AC18B3B910508F467C0CC
+:100F400005C18F3F910509F048F4803F910508F0F5
+:100F5000ADC0883E910508F43AC1F8C0811520E281
+:100F6000920708F0A5C00895811543E5940790F411
+:100F7000811562E5960708F0C8C0811571E59707ED
+:100F800008F0BEC0811520E5920708F09DC09F7053
+:100F9000906A0895811545E59407D8F4811564E5B4
+:100FA000960708F0C8C0482F4695469570E2479FBF
+:100FB000A00111248370992721E030E0B90102C01B
+:100FC000660F771F8A95E2F7CB01842B952B9A68E1
+:100FD0000895811576E5970708F4B2C09C01305654
+:100FE0002115304108F0B2C09F70AEC0FC01EE0F79
+:100FF000FF1FE657F04062C0853A910509F4A9C089
+:10100000863A910509F0A8C082E890E40895883AEC
+:10101000910509F4A4C0893A910509F4A3C08A3A5C
+:10102000910509F4A2C08B3A910509F4A1C08C3A4C
+:10103000910509F4A0C08D3A910509F49FC0803B49
+:10104000910509F49EC08E3A910509F49DC08F3A2E
+:10105000910509F49CC0813B910509F49BC0823B3A
+:10106000910509F49AC0833B910509F499C0843B2A
+:10107000910509F498C0853B910509F497C0863B1A
+:10108000910509F496C0873B910509F495C0883B0A
+:10109000910509F494C0893B910509F493C08A3BFA
+:1010A000910509F492C080E094E408959065089554
+:1010B000FC01FF70EE0FFF1FE65FFE4F85919491DC
+:1010C00008959927906C0895482F437021E030E0EF
+:1010D00002C0220F331F4A95E2F73C68AC0164E07E
+:1010E000569547956A95E1F74370342B8F70869536
+:1010F000869560E2869FC0011124822B932B089570
+:10110000982F8827816F906A0895482F46954695B5
+:1011100070E2479FA00111248370992721E030E0FD
+:10112000B90102C0660F771F8A95E2F7CB01842BC5
+:10113000952B9C680895982F8827846F906A08954E
+:101140008F719927982F88279062089580E090E00A
+:10115000089581E890E4089583E890E4089582EE8C
+:1011600094E4089589EE94E408958AEE94E4089551
+:1011700085EB94E4089586EB94E4089587EB94E47A
+:1011800008958CEC94E408958DEC94E4089583E83C
+:1011900095E408958AE895E4089582E995E4089530
+:1011A00084E995E4089581E296E4089583E296E463
+:1011B000089584E296E4089585E296E4089586E22F
+:1011C00096E4089587E296E408958AE296E4089505
+:1011D000089596E0799FF001112494E5899FE00D30
+:1011E000F11D1124E60FF11DEE0FFF1FE25FFE4F10
+:1011F0008591949108958238910549F1B0F4813335
+:10120000910509F458C048F48932910509F44EC09B
+:101210008A32910509F454C008958533910509F483
+:1012200040C08933910599F00895833E910529F1D5
+:1012300038F4803E910591F0823E9105A1F0089529
+:10124000863E9105F9F0873E910531F10895209190
+:10125000F20120FD3AC021FD38C008958091F201CD
+:1012600080FD35C032C08091F20182FF32C0809192
+:10127000F20184FD30C083EE39C08091F20182FD1D
+:1012800028C0F5CF8091F20183FF27C08091F20141
+:1012900084FD21C087EE2AC08091F20183FD1DC02C
+:1012A000F5CF8091F20185FD1AC01BC08091F2013B
+:1012B00085FD17C014C08091F20186FD14C015C0D1
+:1012C0008091F20186FD11C00EC080EE0FC089E34F
+:1012D0000DC082EE0BC080E009C086EE07C089E237
+:1012E00005C085E303C08AE201C081E390E0089570
+:1012F00008950C947809809173010895CF93DF933A
+:1013000000D01F92CDB7DEB79C018091F8018430E8
+:1013100019F593E099833B832A839093E9008FEF3B
+:101320009091E800815095FD06C095ED9A95F1F7F2
+:1013300000008111F5CF8091E80085FF0DC040E0ED
+:1013400050E063E070E0CE0101960E94E70B8091CF
+:10135000E8008E778093E8000F900F900F90DF9158
+:10136000CF910895CF93DF9300D01F92CDB7DEB712
+:101370002091F801243021F522E029839B838A8380
+:1013800083E08093E9008FEF9091E800815095FD14
+:1013900006C095ED9A95F1F700008111F5CF809187
+:1013A000E80085FF0DC040E050E063E070E0CE0152
+:1013B00001960E94E70B8091E8008E778093E80009
+:1013C0000F900F900F90DF91CF9108952091F80129
+:1013D0002430F1F422E02093E9002FEF3091E8006F
+:1013E000215035FD06C035ED3A95F1F70000211189
+:1013F000F5CF2091E80025FF0BC040E050E065E00C
+:1014000070E00E94E70B8091E8008E778093E800FF
+:101410000895CF93DF93EC019091F801943009F097
+:1014200046C080910C018823D9F080910D0188235A
+:10143000B9F09093E9008FEF9091E800815095FD0D
+:1014400006C095E19A95F1F700008111F5CF8091E2
+:10145000E80085FF2CC040E050E060E170E017C07C
+:1014600081E08093E9008FEF9091E800815095FD35
+:1014700006C095ED9A95F1F700008111F5CF8091A6
+:10148000E80085FF14C040E050E068E070E0CE0165
+:101490000E94E70B8091E8008E778093E80080E15E
+:1014A000FE01A3E6B1E001900D928A95E1F7DF918C
+:1014B000CF9108958091F701811109C00E947C0DA0
+:1014C0000E94D90D8091E20084608093E20008952B
+:1014D0001092F701089508950C9473210E94231C23
+:1014E0000E9479210E947F100C94790942E061ECFE
+:1014F00081E00E94F60C42E061EC82E00E94F60C72
+:1015000042E061EC83E00E94F60C42E161EC84E091
+:101510000C94F60C8091FA01833009F455C030F434
+:10152000813071F0823009F48EC008958A3009F458
+:101530007AC08B3009F460C0893009F09CC020C0AB
+:101540008091F901813A09F096C08091E800877F87
+:101550008093E8008091FD019091FE01892B21F498
+:1015600060E183E691E003C060E080E090E070E03D
+:101570000E94320C8091E8008B778093E8000895F8
+:101580008091F901813209F076C08091FD0190913E
+:10159000FE01009719F0039709F06DC08091E800F3
+:1015A000877F8093E8008091E80082FD05C08091EC
+:1015B000F8018111F8CF5FC08091F1008093730131
+:1015C0008091E8008B7753C08091F901813A09F04E
+:1015D00052C08091FD019091FE01892B09F04BC012
+:1015E0008091E800877F8093E8008091E80080FF89
+:1015F000FCCF80910C0136C08091F9018132D9F580
+:101600008091FD019091FE01892BA9F58091E80060
+:10161000877F8093E8000E942B0D8091FB018093CF
+:101620000C010C9418158091F901813221F58091FB
+:10163000E800877F8093E8000E942B0D8091FC01D9
+:101640008093740108958091F901813AA1F4809109
+:10165000E800877F8093E8008091E80080FFFCCF5E
+:10166000809174018093F1008091E8008E778093DF
+:10167000E8000C942B0D089584B7877F84BF0FB6C4
+:10168000F894A89580916000886180936000109222
+:1016900060000FBE80E880936100109261000E949C
+:1016A000CE100E947C0D0E94D90D8091E2008460D2
+:1016B0008093E20078940E945F100E94D01082E034
+:1016C00091E00E947A100E9461218091F80185309A
+:1016D00069F40E94E81B8091F6018823B1F30E940F
+:1016E000151C882391F30E94D10BEFCF0E94D610D6
+:1016F000ECCF292F332723303105C9F064F4213092
+:10170000310581F02230310509F043C08DE690E0CB
+:101710002AE333E042C021323105F1F022323105B3
+:1017200041F137C082E190E027EA33E036C09927E3
+:101730008130910541F08230910541F0892B49F5C6
+:10174000E6E3F3E005C0EEE1F3E002C0E6E0F3E03B
+:10175000849190E09F0121C06430D8F4E62FF0E03E
+:10176000EE0FFF1FEE5DFE4F2081318189E090E09A
+:1017700014C0643070F470E0FB01EE0FFF1FE65EF2
+:10178000FE4F20813181FB01EA5EFE4F808190E0B7
+:1017900004C080E090E020E030E0FA013183208353
+:1017A000089580E189BD82E189BD09B400FEFDCFC5
+:1017B0008091D8008F7D8093D8008091E000826076
+:1017C0008093E0008091E00081FDFCCF0895CF92EE
+:1017D000DF92EF92FF920F931F93CF93DF93EC0171
+:1017E0008B016A010E944A0D811133C0C114D104DA
+:1017F00039F0F60180819181081B190BC80FD91FA0
+:10180000E12CF12C0115110519F18091E80085FDFD
+:1018100016C08091E8008E778093E800C114D1044F
+:1018200049F0F60180819181E80EF91EF182E08293
+:1018300085E00FC00E944A0D882321F30AC08991D8
+:101840008093F10001501109FFEFEF1AFF0ADACF80
+:1018500080E0DF91CF911F910F91FF90EF90DF908B
+:10186000CF9008952091FF0130910002261737078D
+:1018700048F06115710539F42091E8002E77209326
+:10188000E80001C0B90140E061157105A9F120919E
+:10189000F801222309F443C0253009F442C0209105
+:1018A000E80023FD40C02091E80022FD32C02091D5
+:1018B000E80020FFE9CF4091F3002091F20030E0F2
+:1018C000342BFC01CF016115710559F02830310529
+:1018D00040F481918093F100615071092F5F3F4F77
+:1018E000F1CF41E02830310509F040E02091E800D7
+:1018F0002E772093E800C8CF4111C9CF0AC080914C
+:10190000F801882361F0853061F08091E80083FD63
+:101910000AC08091E80082FFF2CF80E0089582E063
+:10192000089583E0089581E008952091FF013091AA
+:1019300000022617370748F06115710539F4209128
+:10194000E8002E772093E80001C0B901FC0120E0F7
+:101950006115710591F18091F801882309F440C067
+:10196000853009F43FC08091E80083FD3DC080913F
+:10197000E80082FD2FC08091E80080FFE9CF209130
+:10198000F3008091F20090E0922B6115710559F0FF
+:101990008830910540F424912093F10031966150F4
+:1019A00071090196F2CF21E0089709F020E08091BB
+:1019B000E8008E778093E800CBCF2111CCCF0AC00E
+:1019C0008091F801882361F0853061F08091E80012
+:1019D00083FD0AC08091E80082FFF2CF80E0089585
+:1019E00082E0089583E0089581E00895982F97306C
+:1019F00058F59093E900981739F07091EC00209118
+:101A0000ED005091F00003C0242F762F50E021FF0D
+:101A100019C03091EB003E7F3093EB003091ED0028
+:101A20003D7F3093ED003091EB0031603093EB005F
+:101A30007093EC002093ED005093F0002091EE00A5
+:101A400027FF07C09F5FD3CF8F708093E90081E0AD
+:101A5000089580E008958091F90187FF11C0809179
+:101A6000E80082FD05C08091F8018111F8CF11C016
+:101A70008091E8008B770BC08091F801882349F0B2
+:101A80008091E80080FFF8CF8091E8008E77809306
+:101A9000E80008952091E4003091E50095E640913A
+:101AA000EC00842F817040FF22C08091E80080FD0F
+:101AB0001CC08091F801882391F0853091F08091CD
+:101AC000EB0085FD10C04091E4005091E500421705
+:101AD000530729F39A01915011F784E0089582E0A9
+:101AE000089583E0089581E0089580E0089540918D
+:101AF000E80042FFDECF08950E94EA0D0E94F20D39
+:101B0000E0EEF0E0808181608083E8EDF0E08081AC
+:101B10008F77808319BCA7EDB0E08C918E7F8C937A
+:101B200080818F7E80831092F70108950F931F9319
+:101B3000CF93DF930E94EA0D0E94F20DC8EDD0E032
+:101B400088818F77888388818068888388818F7D6A
+:101B5000888319BC1092F8011092F4011092F601DA
+:101B60001092F50100EE10E0F80180818B7F8083F8
+:101B700088818160888342E060E080E00E94F60C0A
+:101B8000E1EEF0E080818E7F8083E2EEF0E0808104
+:101B900081608083808188608083F80180818E7F6E
+:101BA0008083888180618883DF91CF911F910F911D
+:101BB0000895E8EDF0E080818F7E8083E7EDF0E02E
+:101BC00080818160808384E082BF81E08093F7011F
+:101BD0000C94960DE8EDF0E080818E7F808310926A
+:101BE000E20008951092DA001092E10008951F9229
+:101BF0000F920FB60F9211242F933F934F935F9341
+:101C00006F937F938F939F93AF93BF93EF93FF93C4
+:101C10008091E10082FF0BC08091E20082FF07C04B
+:101C20008091E1008B7F8093E1000E945E108091A3
+:101C3000DA0080FF1FC08091D80080FF1BC0809118
+:101C4000DA008E7F8093DA008091D90080FF0DC08A
+:101C500080E189BD82E189BD09B400FEFDCF81E04C
+:101C60008093F8010E945A0A05C019BC1092F8012D
+:101C70000E94680A8091E10080FF19C08091E20013
+:101C800080FF15C08091E2008E7F8093E2008091FA
+:101C9000E20080618093E2008091D80080628093AE
+:101CA000D80019BC85E08093F8010E946C0A8091ED
+:101CB000E10084FF30C08091E20084FF2CC080E10D
+:101CC00089BD82E189BD09B400FEFDCF8091D800B5
+:101CD0008F7D8093D8008091E1008F7E8093E1001A
+:101CE0008091E2008F7E8093E2008091E20081602B
+:101CF0008093E2008091F401882311F084E007C012
+:101D00008091E30087FD02C081E001C083E0809301
+:101D1000F8010E946E0A8091E10083FF29C0809142
+:101D2000E20083FF25C08091E100877F8093E1007E
+:101D300082E08093F8011092F4018091E1008E7F9F
+:101D40008093E1008091E2008E7F8093E200809199
+:101D5000E20080618093E20042E060E080E00E9467
+:101D6000F60C8091F00088608093F0000E946B0A6E
+:101D7000FF91EF91BF91AF919F918F917F916F9163
+:101D80005F914F913F912F910F900FBE0F901F9039
+:101D900018951F920F920FB60F9211242F933F9315
+:101DA0004F935F936F937F938F939F93AF93BF9363
+:101DB000CF93DF93EF93FF93C091E900CF708091B1
+:101DC000EC00D82FD17080FDD0E81092E90080910E
+:101DD000F000877F8093F00078940E940D0F10929E
+:101DE000E9008091F00088608093F000CD2BCF70E7
+:101DF000C093E900FF91EF91DF91CF91BF91AF9137
+:101E00009F918F917F916F915F914F913F912F9112
+:101E10000F900FBE0F901F9018951F93CF93DF93D5
+:101E2000CDB7DEB7AA970FB6F894DEBF0FBECDBF11
+:101E3000E9EFF1E088E08E0F9091F10091938E131D
+:101E4000FBCF0E948A0A8091E80083FF1FC1809126
+:101E5000F9019091FA01492F50E04A30510508F0FC
+:101E600015C1FA01EA5AFF4F0C940A23803881F019
+:101E7000823809F00BC18091FD018F708093E900D9
+:101E80008091EB0085FB882780F91092E90006C05D
+:101E90008091F5019091F601911182609091E80096
+:101EA000977F9093E8008093F1001092F100C8C0F2
+:101EB000282F2D7F09F0EAC0882319F0823061F0C5
+:101EC000E5C08091FB01813009F0E0C0933009F05A
+:101ED00080E08093F6012BC08091FB01811127C027
+:101EE0008091FD018F7009F4D1C08093E9002091A9
+:101EF000EB0020FF1CC0933021F48091EB00806246
+:101F000014C09091EB0090619093EB0021E030E0E1
+:101F1000A90102C0440F551F8A95E2F74093EA00D9
+:101F20001092EA008091EB0088608093EB001092A1
+:101F3000E9008091E800877F86C08111A7C01091D9
+:101F4000FB011F778091E3008078812B8093E30071
+:101F50008091E800877F8093E8000E942B0D80919C
+:101F6000E80080FFFCCF8091E30080688093E3006D
+:101F7000111102C082E001C083E08093F80186C0A5
+:101F80008058823008F082C08091FB019091FC0162
+:101F90008C3D53E0950779F583E08A838AE2898353
+:101FA0004FB7F894DE01139620E03EE051E2E32FB4
+:101FB000F0E050935700E49120FF03C0E295EF70EA
+:101FC0003F5FEF708E2F90E0EA3010F0C79601C0AF
+:101FD000C0968D939D932F5F243149F74FBF809119
+:101FE000E800877F8093E8006AE270E0CE01019606
+:101FF0000E94320C14C0AE014F5F5F4F6091FD0133
+:102000000E94790BBC01892B09F440C09091E80033
+:10201000977F9093E80089819A810E94950C809126
+:10202000E8008B778093E80031C0803879F58091A3
+:10203000E800877F8093E8008091F4018093F100AD
+:102040008091E8008E778093E8000E942B0D1EC0DF
+:1020500081111CC09091FB019230C0F48091E80086
+:10206000877F8093E8009093F4010E942B0D80916C
+:10207000F401811106C08091E30087FD02C081E078
+:1020800001C084E08093F8010E94760A8091E80004
+:1020900083FF0AC08091E800877F8093E8008091E9
+:1020A000EB0080628093EB00AA960FB6F894DEBF37
+:1020B0000FBECDBFDF91CF911F9108950895CF93AB
+:1020C0008091F8018823A1F0C091E900CF70909130
+:1020D000EC00892F817090FD80E8C82B1092E900F8
+:1020E0008091E80083FD0E940D0FCF70C093E9003E
+:1020F000CF91089590937A01809379010895E091AA
+:102100007901F0917A01309721F00190F081E02D72
+:10211000099480E00895E0917901F0917A01309777
+:1021200021F00280F381E02D09940895E091790176
+:10213000F0917A01309721F00480F581E02D099427
+:10214000089520917701309178018217930771F0FB
+:102150009093780180937701E0917901F0917A0171
+:10216000309721F00680F781E02D099408952091A1
+:102170007501309176018217930771F09093760183
+:1021800080937501E0917901F0917A01309721F007
+:102190000084F185E02D0994089508950C94CD10E4
+:1021A0000E94291C0E943E030C94AF1C9F92AF9288
+:1021B000BF92CF92DF92EF92FF920F931F93CF9334
+:1021C000DF9300D000D000D0CDB7DEB70E9465030A
+:1021D0000DE010E0AA24A394B12C902E802F0E9431
+:1021E0005304980124583E4F6901F901F080F82604
+:1021F000A1F40150110988F78FEF89838A831B822C
+:102200000E94321C8160782F9D838C8349815A8182
+:102210006B818D810E946D112FC09091DF0191FF24
+:1022200004C08E830E9459048E8125E030E0A50110
+:10223000022E01C0440F0A94EAF7E42E4F21C1F0A8
+:1022400029839A828E2191E009F490E09B830E9479
+:10225000321C8160782F9D838C8349815A816B81E8
+:102260008D810E946D11F6018081E826E08204C014
+:1022700021503109E0F6BDCF0E947D1E10917B01F7
+:102280000E947F101817B9F00E947F1080937B0185
+:1022900026960FB6F894DEBF0FBECDBFDF91CF916B
+:1022A0001F910F91FF90EF90DF90CF90BF90AF9074
+:1022B0009F900C94790926960FB6F894DEBF0FBE56
+:1022C000CDBFDF91CF911F910F91FF90EF90DF90E5
+:1022D000CF90BF90AF909F900895CF93DF93CDB7ED
+:1022E000DEB72B970FB6F894DEBF0FBECDBF4F837E
+:1022F000588769877A878B87DE01119686E0FD0112
+:1023000011928A95E9F785E0FE01379601900D92CA
+:102310008A95E1F749815A816B817C818D819E810B
+:102320000E94B6172B960FB6F894DEBF0FBECDBF36
+:10233000DF91CF910895CF93882309F4C2C0C82FAD
+:10234000823859F40E947F1081FDBBC089E30E944E
+:10235000901A0E945D1B89E30CC0833879F40E94B7
+:102360007F1080FDAEC083E50E94901A0E945D1B25
+:1023700083E50E94D21ACF910C945D1B843859F4E6
+:102380000E947F1082FD9DC087E40E94901A0E94E7
+:102390005D1B87E4EECF8CEF8C0F813A48F48C2FD5
+:1023A0000E94C72081118DC08C2F0E94901AE3CF0C
+:1023B00080E28C0F883048F4C77081E001C0880F3C
+:1023C000CA95EAF70E94161BD6CF8BE58C0F833097
+:1023D00078F4C53A29F0C63A31F083E890E005C0B8
+:1023E00081E890E002C082E890E0CF910C94A110C7
+:1023F00088E58C0F833108F064C0C83A39F1C93AD6
+:1024000041F1CA3A49F1CB3A51F1CC3A59F1CD3ABE
+:1024100061F1C03B69F1CE3A71F1CF3A79F1C13B3C
+:1024200081F1C23B89F1C33B91F1C43B99F1C53BBA
+:10243000A1F1C63BA9F1C73BB1F1C83BB9F1C93B1A
+:10244000C1F1CA3BC9F180E090E038C082EE90E073
+:1024500035C089EE90E032C08AEE90E02FC085EB67
+:1024600090E02CC086EB90E029C087EB90E026C07E
+:102470008CEC90E023C08DEC90E020C083E891E0EC
+:102480001DC08AE891E01AC082E991E017C084E992
+:1024900091E014C081E292E011C083E292E00EC0AC
+:1024A00084E292E00BC085E292E008C086E292E00E
+:1024B00005C087E292E002C08AE292E0CF910C94DC
+:1024C000B710CF910895882309F44BC0823859F48E
+:1024D0000E947F1081FF45C089E30E94901A0E94EC
+:1024E0005D1B89E30CC0833871F40E947F1080FF6C
+:1024F00038C083E50E94901A0E945D1B83E50E940C
+:10250000D21A0C945D1B843859F40E947F1082FF0C
+:1025100028C087E40E94901A0E945D1B87E4EFCFD9
+:102520009CEF980F913A58F390E2980F983050F43E
+:10253000877091E001C0990F8A95EAF7892F0E9470
+:102540001C1BDFCF9BE5980F933020F480E090E0D8
+:102550000C94A110885A833120F480E090E00C9410
+:10256000B7100895882321F00E94161B0C945D1B60
+:102570000895882321F00E941C1B0C945D1B089574
+:102580007F928F929F92AF92BF92CF92DF92EF9203
+:10259000FF920F931F93CF93DF931F92CDB7DEB7B8
+:1025A0007C01C62E772EFC01058102950F701281E9
+:1025B00011110E94331B0E94891A882379F011237C
+:1025C00069F080E28C0D883048F082E00E94721A37
+:1025D0000E94891A91E0D82ED92601C0D12CE72D6E
+:1025E000E295EF70F0E0E05AFF4F0C940A23872D3C
+:1025F000807F072D0F70882311F00295007F112333
+:1026000089F0002309F490C180E28C0D883020F419
+:10261000802F0E94161B03C0802F0E94261B0E9441
+:102620005D1B82C18C2D0E946312002309F495C1A9
+:1026300080E28C0D883020F4802F0E941C1B03C088
+:10264000802F0E942C1B0E945D1B87C1972D907FBD
+:10265000872D8F70903211F08295807FCC2021F0F1
+:10266000F1E0CF16B1F01EC0112349F0002309F4A8
+:1026700014C1013009F011C10E94461B6EC1002334
+:1026800019F0013009F469C189830E94491B8981CD
+:102690000AC1112321F0023008F05FC1FEC0011110
+:1026A0005CC101C1112321F0002309F4F6C03CC133
+:1026B000002309F4F8C03EC1872D86958695837066
+:1026C00090E0009719F0019761F047C1112321F0C4
+:1026D0008C2D972D937002C080E090E00E94A11095
+:1026E0003CC1112321F08C2D972D937002C080E006
+:1026F00090E00E94B71031C18C2D112319F00E9477
+:10270000851D02C00E94ED1D0E94721E26C1872DEC
+:10271000837009F052C0111120C18C2D82958695CD
+:102720008770880F880F9C2D9F70892E912CA12C6B
+:10273000B12C082E04C0880C991CAA1CBB1C0A943E
+:10274000D2F7C4FE14C00FE010E020E030E0B90181
+:10275000A80104C0440F551F661F771F8A95D2F742
+:10276000CB01BA01609570958095909503C060E0AB
+:1027700070E0CB01272D26952695237030E022307E
+:10278000310569F02330310589F0682979298A29D2
+:102790009B292130310571F00E94FE18DEC06829A6
+:1027A00079298A299B290E941A19D7C00E94FE18EC
+:1027B000C501B4010E94E218D0C0112319F0872D81
+:1027C000817001C08695882309F4C7C08C2D82953D
+:1027D00086958770880F880F9C2D9F70892E912C6D
+:1027E000A12CB12C082E04C0880C991CAA1CBB1C5F
+:1027F0000A94D2F7C4FE14C00FE010E020E030E0ED
+:10280000B901A80104C0440F551F661F771F8A95A0
+:10281000D2F7CB01BA01609570958095909503C071
+:1028200060E070E0CB01272D269526952370422F7E
+:1028300050E04230510569F04330510589F0682974
+:1028400079298A299B294130510571F00E94D819B4
+:1028500084C0682979298A299B290E94F4197DC09E
+:102860000E94D819C501B4010E94BC1976C08C2DF4
+:1028700090E0FC01E05EF109E531F10508F050C09F
+:10288000E059FF4F0C940A230C2D0F70872D8F7188
+:10289000112331F00E945519802F0E94B2125DC0A1
+:1028A0000E947619802F0E94B91257C0112339F067
+:1028B000011153C0872D8F710E949B194EC00230A9
+:1028C00008F04BC0F7CF112339F0872D8F710E948C
+:1028D000551943C01123C9F3872D8F710E947619B2
+:1028E0003CC0112329F0872D8F710E94401935C0FB
+:1028F0000E94361932C0112351F0172D1F71812FFC
+:102900000E94551963E0812F0E94691A26C081E058
+:102910000E94721A023008F182E00E94721A1DC0F1
+:10292000112331F0002389F28C2D0E949B1115C0D8
+:10293000002391F28C2D0E9463120FC0472D4F701F
+:102940006C2DC7010E942F050E945A1806C0472D02
+:102950004F706C2DC7010E94E808DD20F9F00E943D
+:10296000651A80FD1BC0F70112820E945F1A0E9447
+:102970005519C7010E94DD140E945F1A0F90DF9164
+:10298000CF911F910F91FF90EF90DF90CF90BF906C
+:10299000AF909F908F907F900C9476190F90DF915D
+:1029A000CF911F910F91FF90EF90DF90CF90BF904C
+:1029B000AF909F908F907F9008950F931F93CF9328
+:1029C000DF93EC01888199812B813C81232BB9F025
+:1029D0009F3F11F48F3F99F0CE010E94710588232B
+:1029E00071F0688179818A810E945B1A8C010E9452
+:1029F000101A0E94D718B801CE010E94C012DF91B0
+:102A0000CF911F910F9108950E94331B0E94431B89
+:102A10000E94081B0E945D1B0E94231F0E94721EC1
+:102A200080E090E00E94A11080E090E00C94B7104C
+:102A30000E94231B0C9404150E94501A292F2295E2
+:102A40002F7030E02C3031054CF42A3031056CF415
+:102A50002250310922303105A8F407C02C3031054D
+:102A600069F02F30310551F00DC0803F69F018F446
+:102A7000803E40F409C0843F29F406C093FB8827B8
+:102A800080F9089580E0089581E00895CF93DF9361
+:102A900000D000D01F92CDB7DEB70F900F900F90EF
+:102AA0000F900F90DF91CF910895CF93DF9300D0D7
+:102AB00000D000D0CDB7DEB726960FB6F894DEBFB3
+:102AC0000FBECDBFDF91CF9108951F93CF93DF93BA
+:102AD000C0918A0116E080918B01C81799F0D0E06F
+:102AE0001C9FF0011D9FF00D1124E457FE4F408103
+:102AF000518162817381848195810E94551521964F
+:102B0000C770E9CFDF91CF911F9108954091BC012B
+:102B10005091BD016091BE017091BF018091C001D3
+:102B20009091C1010C9455158091C10182958F70CF
+:102B300009F054C08091BE01882309F44FC08091F0
+:102B40008A01A0918B016091BC017091BD014091FF
+:102B5000BF015091C001B6E08A1709F43FC090E070
+:102B600041155105C1F17F3F11F46F3FA1F1B89FAD
+:102B7000F001B99FF00D1124E457FE4F218172132B
+:102B80002AC02081621327C02281211124C0238101
+:102B900034812417350710F421503109241B350BDB
+:102BA000283C3105C0F42091C1012F702061209391
+:102BB000C10126E0289FF001299FF00D1124EF5656
+:102BC000FE4F80818F70806180838CEB91E00E944A
+:102BD000DD140C94651501968770BECF0895CF92D1
+:102BE000DF92EF92FF920F931F93CF93DF93CDB7B6
+:102BF000DEB762970FB6F894DEBF0FBECDBF8C0173
+:102C000085E0F801DE011D9601900D928A95E1F7AD
+:102C1000D8014C9111965C91119712966C91129774
+:102C20001396CD90DC9014973091BC017091BD014A
+:102C30008091BF019091C001009709F46BC17F3F63
+:102C400019F43F3F09F466C1E090BE01EE2009F49B
+:102C5000C0C02091C101C816D90628F0F601E81BB2
+:102C6000F90BCF0104C0809590958C0D9D1DFF241C
+:102C7000F394883C910578F0F12C207F09F0C6C0D0
+:102C80007C2DD98AC88A89890E9446158CEB91E0EF
+:102C90000E94DD14B1C0822F807F09F046C07513F9
+:102CA00014C0341312C0611110C02F702061209322
+:102CB000C1010E9486158CEB91E00E94DD14809189
+:102CC000C101D80115968C932EC0CD2819F15F3F14
+:102CD00011F44F3FF9F0F62E61111CC080918A016A
+:102CE00020918B0136E0821709F45AC090E0389F9A
+:102CF000F001399FF00D1124E457FE4F71815713F5
+:102D000006C07081471303C07281711103C0019620
+:102D10008770E9CFF62E662309F418C18091C101AE
+:102D200081608093C101F12C11C1751308C0341367
+:102D300006C0611104C08091C101D801C3C04D8794
+:102D40005E878D859E856A8B0E941C156A89882303
+:102D5000E1F16623D1F12091C101822F82958F701C
+:102D600090E0029774F08091BC019091BD0198872A
+:102D70008F831986DB86CA862C87CE0107960E9430
+:102D8000DD1486E0F801ACEBB1E001900D928A957C
+:102D9000E1F70E9494150E948615FF24F394D6C093
+:102DA0004D875E878D859E850E94501A292F22951A
+:102DB0002F7030E0223031050CF0BCC09F7009F05C
+:102DC000B6C0805E883008F4C1C0C8010E94DD141E
+:102DD000E4CFC816D90608F453C0F601E81BF90B76
+:102DE000CF01883C910508F450C0F12C7C2DD98A84
+:102DF000C88A89890E944615ECEBF1E086E0DF0184
+:102E00001D928A95E9F70E948615A0C0751314C01B
+:102E1000341312C0611110C08091C101F801858383
+:102E2000C8010E94DD1486E0ECEBF1E0DF011D92A9
+:102E30008A95E9F7FE2C8AC04D875E878D859E8531
+:102E40006A8B0E941C156A89882309F4BECF662309
+:102E500009F4BBCF2091C101822F82958F7090E041
+:102E600002970CF48ECF8091BC019091BD019A83A2
+:102E700089831B82DD82CC822E83CE0101967FCF97
+:102E8000809590958C0D9D1DACCFF62E662309F490
+:102E90009CCF75132EC034132CC02091C10120FD8E
+:102EA0001FC0822F82958F70D9F0D80115962C9370
+:102EB00015978F3049F08F5F982F9295907F822FD2
+:102EC0008F70892B15968C93C8010E94DD1486E0C3
+:102ED000F801ACEBB1E001900D928A95E1F793CF48
+:102EE00086E0F801ACEBB1E001900D928A95E1F734
+:102EF0002DC04D875E878D859E850E941C15811192
+:102F000040CF8091C10181608093C101C8010E94BE
+:102F1000DD141CC0662309F458CF4D875E878D856C
+:102F20009E850E941C15882309F44FCF2ACF81115A
+:102F300048CF0CC0243031050CF047CF9F7009F406
+:102F400040CFF8019581907F09F03BCF8F2D62969D
+:102F50000FB6F894DEBF0FBECDBFDF91CF911F91AA
+:102F60000F91FF90EF90DF90CF9008951F93CF9334
+:102F7000DF93CDB7DEB72C970FB6F894DEBF0FBE48
+:102F8000CDBF4F83588769877A878B879C87CE010F
+:102F900007960E94EF15882369F08F8198852A850E
+:102FA0003B85232BF1F19F3F09F063C08F3F09F070
+:102FB00060C037C086E0FE013796DE0111960190B1
+:102FC0000D928A95E1F76F817885EA85FB853097C8
+:102FD00041F17F3F11F46F3F21F120918B0130E0EF
+:102FE000C90101968770992740918A0150E08417A2
+:102FF000950709F447C069837A83FD83EC8396E0E3
+:10300000929FD001939FB00D1124A457BE4FFE0193
+:10301000319601900D929A95E1F780938B010E9471
+:10302000651516E080918A0190918B018917C1F195
+:10303000189FC001112484579E4F0E94EF158823CA
+:1030400079F1E0918A011E9FF0011124E457FE4FAF
+:103050004081518162817381848195810E945515DF
+:1030600080918A0190E001968770992780938A0168
+:10307000D9CF4F81588569857A858B859C850E943B
+:103080005515CFCF0E94181510928B0110928A010E
+:10309000ECEBF1E086E0DF011D928A95E9F7C1CF04
+:1030A0002C960FB6F894DEBF0FBECDBFDF91CF9147
+:1030B0001F910895EF92FF920F931F93CF93DF9389
+:1030C0008C01892B09F46CC0F12CEE24E394E80107
+:1030D0002196F8018491843740F4843008F051C07F
+:1030E000813081F0823019F15BC0853709F444C02A
+:1030F000A8F19CE7980F903708F052C08F770E9494
+:10310000631241C00E5F1F4FFE01C49180E28C0F1D
+:10311000883048F4C7708E2D01C0880FCA95EAF731
+:103120000E94361B14C08C2F0E949B112DC00E5F75
+:103130001F4FFE01C49180E28C0F883058F4C77095
+:103140008E2D01C0880FCA95EAF70E943C1B0E9491
+:103150005D1B1AC08C2F0E94631216C00E5F1F4F9A
+:10316000FE01C491CC2381F08FE99FE00197F1F734
+:1031700000C00000C150F6CF0E5F1F4FFE01F4905B
+:1031800003C00E949B118E018F2D882309F49FCFCD
+:10319000EFE9FFE03197F1F700C000008150F5CF73
+:1031A000DF91CF911F910F91FF90EF9008950895B7
+:1031B0006093C6017093C7018093C8019093C901C1
+:1031C0000C9404150F931F930091C6011091C70131
+:1031D0002091C8013091C901DC01CB01802B912BDA
+:1031E000A22BB32B8093C6019093C701A093C80173
+:1031F000B093C9011F910F910C9404150F931F9365
+:103200000091C6011091C7012091C8013091C901F8
+:10321000DC01CB0180239123A223B3238093C60139
+:103220009093C701A093C801B093C9011F910F915A
+:103230000C9404150F931F930091C6011091C701C0
+:103240002091C8013091C901DC01CB018027912771
+:10325000A227B3278093C6019093C701A093C8010A
+:10326000B093C9011F910F910C9404151092C201E3
+:103270001092C3011092C4011092C5010C94041560
+:1032800041E050E060E070E004C0440F551F661F4D
+:10329000771F8A95D2F74093C2015093C301609380
+:1032A000C4017093C5010C94041541E050E060E046
+:1032B00070E004C0440F551F661F771F8A95D2F730
+:1032C0008091C2019091C301A091C401B091C50148
+:1032D000482B592B6A2B7B2B4093C2015093C3017F
+:1032E0006093C4017093C5010C94041541E050E053
+:1032F00060E070E004C0440F551F661F771F8A9579
+:10330000D2F740955095609570958091C20190914B
+:10331000C301A091C401B091C501482359236A2378
+:103320007B234093C2015093C3016093C401709307
+:10333000C5010C94041541E050E060E070E004C069
+:10334000440F551F661F771F8A95D2F78091C201DF
+:103350009091C301A091C401B091C501482759279C
+:103360006A277B274093C2015093C3016093C40135
+:103370007093C5010C9404150F931F930091C20123
+:103380001091C3012091C4013091C501DC01CB0132
+:10339000802B912BA22BB32B8093C2019093C3015E
+:1033A000A093C401B093C5011F910F910C94041513
+:1033B0000F931F930091C2011091C3012091C4018A
+:1033C0003091C501DC01CB0180239123A223B323DB
+:1033D0008093C2019093C301A093C401B093C5012F
+:1033E0001F910F910C9404150F931F930091C2012C
+:1033F0001091C3012091C4013091C501DC01CB01C2
+:1034000080279127A227B3278093C2019093C301FD
+:10341000A093C401B093C5011F910F910C940415A2
+:103420000895CF92DF92EF92FF920F931F93CF9365
+:10343000DF938C01C090C601D090C701E090C80115
+:10344000F090C9018091C2019091C301A091C40183
+:10345000B091C501C82AD92AEA2AFB2ACFE1D0E0D7
+:10346000D701C6010C2E04C0B695A79597958795F0
+:103470000A94D2F780FF06C0B8018C2F0E9467071C
+:10348000019721F4219760F780E001C08C2FDF9134
+:10349000CF911F910F91FF90EF90DF90CF90089503
+:1034A000CF93DF93EC010E94111ABE010E946707BF
+:1034B000DF91CF910895CB010E94501A0895809119
+:1034C000CA0185958595859508958091CA01877073
+:1034D000089598E0899F90011124262B2093CA011A
+:1034E0000C9455192091CA01809582238093CA01BA
+:1034F000982F977069F430E0482F552747FD509575
+:103500002417350729F08595859585950C947619AE
+:1035100008959091CA01977081E009F480E00895C0
+:1035200090910C01992321F090910D01911109C006
+:1035300020910E0130910F01F90132969FEF40E08A
+:103540001FC0982F9695969596959F3050F5E091CF
+:103550000E01F0910F01E90FF11D877021E030E0BD
+:10356000A90102C0440F551F8A95E2F7CA01918153
+:10357000892B818308959F3F39F04F5F4E3041F092
+:1035800051915813F8CF0DC05111F7CF942FF5CFAB
+:103590009F3F39F0F901E90FF11D97FDFA958283FC
+:1035A0000895089590910C01992321F090910D01B7
+:1035B000911109C020910E0130910F01F90132964D
+:1035C000205F3F4F1FC0982F9695969596959F30F8
+:1035D000F0F4E0910E01F0910F01E90FF11D8770F9
+:1035E00021E030E0A90102C0440F551F8A95E2F79F
+:1035F000CA01809591818923818308953196E217CC
+:10360000F30729F090819813F9CF1082F7CF08952E
+:1036100081E090E0E0910E01F0910F01E80FF91FB9
+:103620001082019680319105A9F708959091DE01ED
+:10363000892B8093DE01089580959091DE01892386
+:103640008093DE0108951092DE0108959091DD01CE
+:10365000892B8093DD01089580959091DD01892368
+:103660008093DD0108951092DD0108959091DC01B1
+:10367000892B8093DC01089580959091DC0189234A
+:103680008093DC0108951092DC0108958093CB01B2
+:1036900008951092CB01089580910E0190910F0131
+:1036A000FC0131969C01205F3F4F80E09191911188
+:1036B0008F5FE217F307D1F70895E0910E01F091C3
+:1036C0000F018091DE018083E0910E01F0910F01E6
+:1036D00090818091DD01892B8083E0910E01F09132
+:1036E0000F0190818091DC01892B80838091CB0137
+:1036F000882361F0E0910E01F0910F019081892BF8
+:1037000080830E944C1B81111092CB0180910E018D
+:1037100090910F010C948B1020E0009739F0AC01D0
+:1037200041505109842395232F5FF7CF822F0895AD
+:10373000CF92DF92EF92FF926C01EE24FF24C1142E
+:10374000D104E104F10421F0C701B60120E101C078
+:1037500020E0C72ED82EE92EFF24C114D104E104A5
+:10376000F10419F0285FC701B6016B017C0154E038
+:10377000F694E794D794C7945A95D1F7C114D1041D
+:10378000E104F10419F02C5FC701B6016B017C0163
+:1037900042E0F694E794D794C7944A95D1F7C114C0
+:1037A000D104E104F10419F02E5FC701B601DC0178
+:1037B000CB01B695A79597958795892B8A2B8B2B4F
+:1037C00009F02F5F822FFF90EF90DF90CF90089548
+:1037D0008091F801843039F11092E00120E488E111
+:1037E00090E00FB6F894A895809360000FBE2093E8
+:1037F000600080E00E94790983B7817F846083BF85
+:1038000083B7816083BF7894889583B78E7F83BFA9
+:103810000FB6F894A895809160008861809360004D
+:10382000109260000FBE089508950E9452030E94F6
+:1038300065030E94141C0E945A0491E0811101C08A
+:1038400090E0892F08950E9418150E947F100C9413
+:10385000790982E084BD93E095BD9AEF97BD80938E
+:103860006E0008952FB7F8948091E1019091E201E4
+:10387000A091E301B091E4012FBF0895CF92DF92B0
+:10388000EF92FF920F931F932FB7F8944091E101AD
+:103890005091E2016091E3017091E4012FBF6A0150
+:1038A0007B01EE24FF248C0120E030E0C016D1061D
+:1038B000E206F30610F4415051099A01281B390B16
+:1038C000C9011F910F91FF90EF90DF90CF90089565
+:1038D0001F920F920FB60F9211248F939F93AF9365
+:1038E000BF938091E1019091E201A091E301B09139
+:1038F000E4010196A11DB11D8093E1019093E201C5
+:10390000A093E301B093E401BF91AF919F918F9198
+:103910000F900FBE0F901F9018950E947C0DF89489
+:103920002FEF87EA91E6215080409040E1F700C0F8
+:10393000000087E090EBDC0180930102909302028B
+:10394000A0930302B09304029CE088E10FB6F894C0
+:10395000A895809360000FBE90936000FFCF0E94F7
+:10396000E71C811102C00E94CD1C0E94F21C8093B2
+:10397000DF010E94FA1C90E09093F3018093F20122
+:1039800087FB882780F980930D010E94F61C682F21
+:1039900070E080E090E00C94D8186DEE7EEF80E04F
+:1039A00090E00E94432360E082E090E00E94322396
+:1039B00060E083E090E00E94322360E084E090E0E9
+:1039C0000E94322360E085E090E00C94322380E096
+:1039D00090E00E942C2321E08D3E9E4F09F020E0D4
+:1039E000822F089582E090E00C94242383E090E0FD
+:1039F0000C94242384E090E00C942423682F84E02A
+:103A000090E00C9432238091E70180FF0BC060911D
+:103A1000130185E0689FB001112475956795759530
+:103A200067952BC081FF09C06091130185E0689FF5
+:103A3000B00111247595679520C082FF07C0609181
+:103A4000130185E0689FB001112417C09091E8012F
+:103A50009923D1F060911201961788F720911301F4
+:103A600085E0289F90011124929FA001939F500D03
+:103A7000112470E0CA010E94F6226038710540F4FA
+:103A80006115710539F002C065E070E0862F089578
+:103A90008FE7089581E008958091E70180FF08C0D5
+:103AA0006091110170E0759567957595679521C0D6
+:103AB00081FF06C06091110170E07595679519C08E
+:103AC00082FF04C06091110170E010C09091E80184
+:103AD0009923C1F0609110019617A0F78091110110
+:103AE000899FC001112470E00E94F62260387105A0
+:103AF00028F46115710521F0862F08958FE7089548
+:103B000081E0089561E070E0F4CF803F21F40E94ED
+:103B1000031D819504C0813F29F40E94031D8093F9
+:103B2000EB010895823F21F40E94031D819504C09A
+:103B3000833F29F40E94031D8093EA010895893F81
+:103B400019F40E944C1D05C08A3F31F40E944C1D9F
+:103B500081958093EC0108958B3F21F40E944C1DC8
+:103B6000819504C08C3F29F40E944C1D8093ED0187
+:103B70000895843F21F48091E901816017C0853F59
+:103B800021F48091E901826011C0863F21F4809187
+:103B9000E90184600BC0873F21F48091E9018860CE
+:103BA00005C0883F31F48091E90180618093E9018B
+:103BB00008958D3F21F48091E70181600BC08E3F15
+:103BC00021F48091E701826005C08F3F29F4809144
+:103BD000E70184608093E7010895803F39F4809184
+:103BE000EB0187FF6CC01092EB0169C0813F29F4A3
+:103BF0008091EB011816BCF362C09091EA01823FFC
+:103C000029F497FF5CC01092EA0159C0833F19F470
+:103C10001916CCF354C0893F41F48091EC01181679
+:103C20000CF04DC01092EC014AC08A3F29F48091FB
+:103C3000EC0187FF44C0F6CF8B3F39F48091ED0152
+:103C400087FF3DC01092ED013AC08C3F29F480916E
+:103C5000ED011816BCF333C0843F21F48091E901D3
+:103C60008E7F17C0853F21F48091E9018D7F11C0BF
+:103C7000863F21F48091E9018B7F0BC0873F21F4BF
+:103C80008091E901877F05C0883F31F48091E90187
+:103C90008F7E8093E90113C08D3F21F48091E7016D
+:103CA0008E7F0BC08E3F21F48091E7018D7F05C090
+:103CB0008F3F29F48091E7018B7F8093E70180910A
+:103CC000EA0181110EC08091EB0181110AC080913F
+:103CD000EC01811106C08091ED01811102C01092AA
+:103CE000E801089589EE91E00E9496100E94321C2E
+:103CF0009093E6018093E50108951F93CF93DF939E
+:103D00008091E5019091E6010E943E1CAC019091EA
+:103D1000E801992321F02091140130E006C02091A0
+:103D200015018AE0289F900111244217530708F4D7
+:103D300086C08091EA01C091EB01D091EC01109115
+:103D4000ED01811107C0C11176C0D11174C01111EC
+:103D500072C075C09F3F19F09F5F9093E8011816DD
+:103D600024F40E94031D8093EA018091EA0187FFF9
+:103D700005C00E94031D81958093EA011C1624F45E
+:103D80000E94031D8093EB018091EB0187FF05C02A
+:103D90000E94031D81958093EB016091EA016623E7
+:103DA00039F1C091EB01CC2319F1772767FD7095AC
+:103DB000872F972F0E94FD2123E333E343E35FE343
+:103DC0000E9461220E94C5216093EA016C2F77272F
+:103DD00067FD7095872F972F0E94FD2123E333E322
+:103DE00043E35FE30E9461220E94C5216093EB01DF
+:103DF0001D1624F40E944C1D8093EC018091EC016F
+:103E000087FF05C00E944C1D81958093EC0111161F
+:103E100024F40E944C1D8093ED018091ED0187FFF9
+:103E200005C00E944C1D81958093ED01DF91CF91DB
+:103E30001F910C94721E9F3F09F08ECF96CFDF9199
+:103E4000CF911F910895E9EEF1E085E0DF011D9229
+:103E50008A95E9F71092E8011092E70108958330FE
+:103E600081F128F4813059F08230D1F00895853005
+:103E700009F449C0B8F1863009F456C0089580911C
+:103E80001501262F30E0280F311D2F3F310524F476
+:103E9000680F6093150108958FEF809315010895C1
+:103EA00080911401262F30E0280F311D2F3F31055E
+:103EB00024F4680F6093140108958FEF8093140128
+:103EC000089580911301262F30E0280F311D2F3FD8
+:103ED000310524F4680F6093130108958FEF8093E8
+:103EE0001301089580911201262F30E0280F311D13
+:103EF0002F3F310524F4680F6093120108958FEF6E
+:103F000080931201089580911101262F30E0280F2F
+:103F1000311D2F3F310524F4680F6093110108957E
+:103F20008FEF80931101089580911001262F30E0CA
+:103F3000280F311D2F3F310524F4680F60931001C5
+:103F400008958FEF809310010895833011F128F4C4
+:103F5000813049F0823091F00895853081F120F16F
+:103F60008630C1F1089580911501681720F4861BF1
+:103F70008093150108951092150108958091140100
+:103F8000681720F4861B8093140108951092140181
+:103F9000089580911301681720F4861B8093130104
+:103FA000089510921301089580911201681720F46A
+:103FB000861B80931201089510921201089580913A
+:103FC0001101681720F4861B809311010895109247
+:103FD0001101089580911001681720F4861B8093C9
+:103FE000100108951092100108950F931F938D31C1
+:103FF00009F471C008F045C0803109F485C008F5A6
+:10400000873009F46FC068F4863009F0ADC0809144
+:10401000DF01817F8E7F8093DF0181E08093EF015C
+:10402000A4C08B3009F49EC08E3009F09DC08091F1
+:10403000DF0182FB222720F991E0922790FB82F991
+:104040006CC0863109F48EC060F4813109F08CC0F7
+:104050000E94181590910D0181E0892780930D0130
+:1040600081C0893109F47EC08B3109F07DC0809117
+:10407000DF0181FB222720F991E0922790FB81F953
+:104080004CC0853309F466C048F4873209F462C035
+:1040900008F44FC0893209F45DC066C0833438F437
+:1040A0008A3308F044C0883309F45CC05DC08334AF
+:1040B00009F450C0883409F057C00E9418150FEF5A
+:1040C00013ED20E3015010402040E1F700C0000054
+:1040D0000E948D1C47C00E947F210E947F100E9479
+:1040E000790940C09091DF01892F8095817080FB14
+:1040F00090F929F0966098609093DF0136C0997F1F
+:10410000977F9093DF012EC08091DF0183FB2227F0
+:1041100020F991E0922790FB83F98093DF019923A6
+:1041200009F18091DF0181608093DF011BC0895319
+:1041300001C08D5141E050E060E070E08A019B01D8
+:1041400004C0000F111F221F331F8A95D2F7C90127
+:10415000B80104C061E070E080E090E00E94D818EF
+:104160000E94181581E001C080E01F910F91089511
+:1041700080E0089580E008958E518A3030F4E82F71
+:10418000F0E0E65DFE4F8081089580E00895CF93D2
+:10419000C82F8091EF01813079F018F08230E9F179
+:1041A00086C0E0910E01F0910F018081813169F0AC
+:1041B000823209F07EC009C0E0910E01F0910F013A
+:1041C0008081813111F0823261F48C2F0E94B820FD
+:1041D000811104C08C2F0E94F51F1DC081E090E06A
+:1041E0001AC08C2F0E94BA20811114C0C43179F0FA
+:1041F00048F4CB3079F0C03109F05FC082E08093A1
+:10420000EF0108C0C93219F0C83321F056C010922E
+:10421000EF0153C081E0817052C0C93281F110F5C5
+:10422000C43169F1A8F4C73009F045C08AE0809331
+:10423000150194E19093140193E0909313018093FE
+:10424000120188E08093110188E28093100133C04D
+:1042500082EE8C0F863078F58C2F0E94BC208093E4
+:10426000EE0129C0CE34E9F020F4CB3421F56AE028
+:1042700013C0C13579F0C235F1F461E00DC0809111
+:10428000EE01882319F01092EE0115C081E08093B1
+:10429000EF0115C061E006C08091EE010E942F1F62
+:1042A0000AC06AE08091EE010E94A51F04C010922E
+:1042B000EF0180E004C081E002C080E0ACCFCF918C
+:1042C0000895E1E8F0E080818860808380818160EA
+:1042D00080838FB7F89493E09093890090ED90934A
+:1042E00088008FBF0895EFE6F0E0808182608083D0
+:1042F0000895EFE6F0E080818D7F80830895EFE6FA
+:10430000F0E0908182E08927808308951F920F92C8
+:104310000FB60F9211242F933F934F935F936F9398
+:104320007F938F939F93AF93BF93EF93FF9380916E
+:10433000F0019091F10101969093F1018093F001C9
+:10434000811103C082E00E947909E091F101E695B4
+:10435000E695F0E0EB54FB4FE4918091F0018E1371
+:1043600003C080E00E947909FF91EF91BF91AF9166
+:104370009F918F917F916F915F914F913F912F917D
+:104380000F900FBE0F901F9018950E94CC2168943B
+:10439000B1110C945B2208950E94402288F09F572F
+:1043A00098F0B92F9927B751B0F0E1F0660F771F59
+:1043B000881F991F1AF0BA95C9F714C0B13091F04F
+:1043C0000E945A22B1E008950C945A22672F782F48
+:1043D0008827B85F39F0B93FCCF386957795679514
+:1043E000B395D9F73EF490958095709561957F4F80
+:1043F0008F4F9F4F0895E89409C097FB3EF4909526
+:104400008095709561957F4F8F4F9F4F9923A9F0AD
+:10441000F92F96E9BB279395F6958795779567953C
+:10442000B795F111F8CFFAF4BB0F11F460FF1BC080
+:104430006F5F7F4F8F4F9F4F16C0882311F096E913
+:1044400011C0772321F09EE8872F762F05C06623C1
+:1044500071F096E8862F70E060E02AF09A95660F7A
+:10446000771F881FDAF7880F9695879597F9089533
+:1044700057FD9058440F551F59F05F3F71F0479515
+:10448000880F97FB991F61F09F3F79F087950895FA
+:10449000121613061406551FF2CF4695F1DF08C019
+:1044A000161617061806991FF1CF86957105610536
+:1044B00008940895E894BB2766277727CB0197F9DE
+:1044C00008950E9474220C94E5220E94D72238F0AD
+:1044D0000E94DE2220F0952311F00C94CE220C9441
+:1044E000D42211240C945B220E94382270F3959FF1
+:1044F000C1F3950F50E0551F629FF001729FBB27DB
+:10450000F00DB11D639FAA27F00DB11DAA1F649F76
+:104510006627B00DA11D661F829F2227B00DA11D29
+:10452000621F739FB00DA11D621F839FA00D611DAF
+:10453000221F749F3327A00D611D231F849F600DD0
+:10454000211D822F762F6A2F11249F5750409AF0F9
+:10455000F1F088234AF0EE0FFF1FBB1F661F771F85
+:10456000881F91505040A9F79E3F510580F00C9450
+:10457000CE220C945B225F3FE4F3983ED4F3869501
+:1045800077956795B795F795E7959F5FC1F7FE2BF0
+:10459000880F911D9695879597F9089597F99F67CC
+:1045A00080E870E060E008959FEF80EC08950024BB
+:1045B0000A941616170618060906089500240A9488
+:1045C00012161306140605060895092E0394000C0E
+:1045D00011F4882352F0BB0F40F4BF2B11F460FF9D
+:1045E00004C06F5F7F4F8F4F9F4F089597FB072E3B
+:1045F00016F4009407D077FD09D00E94102307FC21
+:1046000005D03EF4909581959F4F089570956195E2
+:104610007F4F0895EE0FFF1F0590F491E02D099450
+:10462000AA1BBB1B51E107C0AA1FBB1FA617B707D8
+:1046300010F0A61BB70B881F991F5A95A9F78095F4
+:104640009095BC01CD010895F999FECF92BD81BD31
+:10465000F89A992780B50895A8E1B0E042E050E0CB
+:104660000C944B23262FF999FECF92BD81BDF89A69
+:10467000019700B4021631F020BD0FB6F894FA9AF3
+:10468000F99A0FBE08950196272F0E9433230C94A8
+:104690003223DC01CB01FC01F999FECF06C0F2BD4B
+:1046A000E1BDF89A319600B40D9241505040B8F7F0
+:0646B0000895F894FFCF0D
+:1046B60002207B09090AE609B2097E090101CC013B
+:1046C60028080A03140A404D363975042804F203F3
+:1046D600B9034C0365037E03970301020304050631
+:0446E60007080900B8
+:00000001FF
diff --git a/keyboards/ergodox/keymaps/tkuichooseyou/keymap.c b/keyboards/ergodox/keymaps/tkuichooseyou/keymap.c new file mode 100644 index 000000000..d1c779186 --- /dev/null +++ b/keyboards/ergodox/keymaps/tkuichooseyou/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 |CMD+{ | | CMD+}| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | Hyper| | Meh | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |Ctrl/Esc| A | S | D | F | G |------| |------| H | J | K | L |; / L2| LGui | + * |--------+------+------+------+------+------| LGui | | LGui |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Del |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, LGUI(LSFT(KC_LBRC)), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, ALL_T(KC_NO), + CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + LGUI(LSFT(KC_RBRC)), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + MEH_T(KC_NO), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_QUOT, + KC_LGUI, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_DELT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/tm2030/keymap.c b/keyboards/ergodox/keymaps/tm2030/keymap.c new file mode 100644 index 000000000..1d861ee7c --- /dev/null +++ b/keyboards/ergodox/keymaps/tm2030/keymap.c @@ -0,0 +1,242 @@ +/* TypeMatrix-2030-like keymap */ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "led.h" + +#define BASE 0 // default layer +#define DVRK 1 // Dvorak layer +#define NUMR 8 // numeric layer +#define FNLR 9 // fn layer + +#define MDBL0 1 +#define MFNLR 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | Del | | Del | 6 | 7 | 8 | 9 | 0 | ] | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T |Backsp| |Backsp| Y | U | I | O | P | [ | + * |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| + * | LShift | A | S | D | F | G |------| |------| H | J | K | L | ; | '/Shift| + * |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | \/Shift| + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | fn | LGui | Play |App/Alt| | RAlt | - | Home | = |End/Ctl| + * `-----------------------------------' `-----------------------------------' + * ,--------------. ,-------------. + * |Esc/Alt| num | | Left |Right | + * ,------+-------+------| |------+------+------. + * | | | PgUp | | Up | | | + * |Space |LShift |------| |------|RShift|Space | + * | | | PgDn | | Down | | | + * `---------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, + KC_LCTL, M(MFNLR), KC_LGUI,KC_MPLY,ALT_T(KC_APP), + + ALT_T(KC_ESC), TG(NUMR), + KC_PGUP, + KC_SPC, KC_LSFT, KC_PGDN, + + // right hand + KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, + KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, SFT_T(KC_QUOT), + KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_BSLS), + KC_RALT, KC_MINS, KC_HOME, KC_EQL, CTL_T(KC_END), + + KC_LEFT, KC_RGHT, + KC_UP, + KC_DOWN, KC_RSFT, KC_SPC + ), +/* Dvorak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | Del | | Del | 6 | 7 | 8 | 9 | 0 | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | ' | , | . | P | Y |Backsp| |Backsp| F | G | C | R | L | / | + * |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| + * | LShift | A | O | E | U | I |------| |------| D | H | T | N | S | -/Shift| + * |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| + * | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | \/Shift| + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | fn | LGui | Play |App/Alt| | RAlt | [ | Home | ] |End/Ctl| + * `-----------------------------------' `-----------------------------------' + * ,--------------. ,-------------. + * |Esc/Alt| num | | Left |Right | + * ,------+-------+------| |------+------+------. + * | | | PgUp | | Up | | | + * |Space |LShift |------| |------|RShift|Space | + * | | | PgDn | | Down | | | + * `---------------------' `--------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[DVRK] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DELT, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BSPC, + KC_LSFT, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_ENT, + KC_LCTL, M(MFNLR), KC_LGUI, KC_MPLY, ALT_T(KC_APP), + + ALT_T(KC_ESC), TG(NUMR), + KC_PGUP, + KC_SPC, KC_LSFT, KC_PGDN, + + // right hand + KC_DELT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_BSPC, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, KC_S, SFT_T(KC_MINS), + KC_ENT, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_BSLS), + KC_RALT, KC_LBRC, KC_HOME, KC_RBRC, CTL_T(KC_END), + + KC_LEFT, KC_RGHT, + KC_UP, + KC_DOWN, KC_RSFT, KC_SPC + ), +/* Numeric Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | 0 | 00 | . |Etr/Ctl| + * `----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | |n.lock|c.lock| + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[NUMR] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_TAB, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_UP, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LEFT, KC_DOWN, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_TRNS, KC_P0, M(MDBL0),KC_PDOT, CTL_T(KC_PENT), + + KC_NLCK, KC_CAPS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* fn layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | |VolUp | | | | | | | | Pause | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | Calc | Mail |Browsr|------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | cut | copy |paste | Mute |VolDn | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | Next | | | + * | Mute | |------| |------| | | + * | | | | | Prev | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[FNLR] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_MAIL, KC_WHOM, + KC_TRNS, KC_TRNS, LSFT(KC_DELT),LCTL(KC_INS),LSFT(KC_INS), KC_MUTE, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_MUTE, KC_TRNS, KC_TRNS, + // right hand + KC_INS, KC_EJCT, KC_PWR, KC_SLEP, KC_WAKE, KC_PSCR, KC_SLCK, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_MPRV, + KC_MNXT, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case MDBL0: + if (record->event.pressed) { + return MACRO( I(25), T(P0), T(P0), END ); + } + break; + case MFNLR: + layer_invert(NUMR); + layer_invert(FNLR); + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + // led 1: numeric layer + if (layer_state & (1 << NUMR)) { + ergodox_right_led_1_on(); + } + // led 2: Dvorak layer + if (default_layer_state == 1 << DVRK) { + ergodox_right_led_2_on(); + } + // led 3: caps lock + if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { + ergodox_right_led_3_on(); + } + +}; diff --git a/keyboards/ergodox/keymaps/tm2030/readme.md b/keyboards/ergodox/keymaps/tm2030/readme.md new file mode 100644 index 000000000..6cd794726 --- /dev/null +++ b/keyboards/ergodox/keymaps/tm2030/readme.md @@ -0,0 +1,136 @@ +# TypeMatrix™ 2030 inspired layout + +This is a [TypeMatrix™ 2030](http://typematrix.com/2030/features.php) inspired layout for the ErgoDox EZ. The _TypeMatrix_ is a nice small ergonomic keyboard with a matrix layout, and it provides several nice features like `enter`, `backspace` and `delete` at the center, bigger `shift` keys and international `cut`, `copy` and `paste` keys. + +The idea in this ErgoDox layout is to make it is as close as possible to the TM2030, such that it would be easy to switch between the TM and the ErgoDox. No _fancy_ features have been implemented, as this is intended to be a base for further customization if desired. Some keys have been duplicated in order to accomodate for most people. + +Most of the TM2030 features are supported except +* automatic window switching (alt-tab key, at the left of the space key) +* show desktop key (at the right of the space key) +* 102/106 modes + +Dvorak mode is even supported by pressing [`Magic`](/TMK_readme.md#magic-commands)+`1` (`Magic` is by default `LShift`+`RShift`) + +Some keys had to be moved around to fit into the ErgoDox, especially the `F1`-`F12` keys and the arrow keys. + +## Base Layer +This is the default layer, close to the TM with the following differences: + + - Top row (with the `F`-keys) and rightmost column (with application shortcuts) are removed, the corresponding keys are displaced elsewhere. + - Bottom-left keys are reorganized on a single row as: `Ctrl`, `fn`, `Gui`, `Play`, `App`/`Alt`. + - `shuffle` and `desktop` are not supported. + - `right-shift` is moved on `'`, `\` and on the right thumb (the latter is actually the only _true_ `right-shift`, and must be used in the `Magic` key combination). + - `right-ctrl` is moved on `End`. + - `]` is moved in place of the dash (`-`). + - Dash (`-`) and `=` are moved on bottom right row. + - Arrows and `PgUp`/`PgDn` are moved on the thumbs. + +``` +,--------------------------------------------------. ,--------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | Del | | Del | 6 | 7 | 8 | 9 | 0 | ] | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | E | R | T |Backsp| |Backsp| Y | U | I | O | P | [ | +|--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| +| LShift | A | S | D | F | G |------| |------| H | J | K | L | ; | '/Shift| +|--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| +| LShift | Z | X | C | V | B | | | | N | M | , | . | / | \/Shift| +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | fn | LGui | Play |App/Alt| | RAlt | - | Home | = |End/Ctl| + `-----------------------------------' `-----------------------------------' + ,--------------. ,-------------. + |Esc/Alt| num | | Left |Right | + ,------+-------+------| |------+------+------. + | | | PgUp | | Up | | | + |Space |LShift |------| |------|RShift|Space | + | | | PgDn | | Down | | | + `---------------------' `--------------------' +``` + +### Layer Switching +- Use `num` to toggle the Numeric Layer. +- Hold `fn` to temporarily activate the Numeric & Fn Layers. + +As on the original TM 2030, when `num` layer is activated, holding `fn` disables it but enables the other `fn` keys. + +## Dvorak Layer +Same as Layer 0 but with _Dvorak_ layout, to use with QWERTY OS layout. + +Enable Dvorak layout with [`Magic`](/TMK_readme.md#magic-commands)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`. + +The middle (green) led indicates when the Dvorak layer is activated. + + ,--------------------------------------------------. ,--------------------------------------------------. + | ` | 1 | 2 | 3 | 4 | 5 | Del | | Del | 6 | 7 | 8 | 9 | 0 | = | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Tab | ' | , | . | P | Y |Backsp| |Backsp| F | G | C | R | L | / | + |--------+------+------+------+------+------|ace | |ace |------+------+------+------+------+--------| + | LShift | A | O | E | U | I |------| |------| D | H | T | N | S | -/Shift| + |--------+------+------+------+------+------|Enter | |Enter |------+------+------+------+------+--------| + | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | \/Shift| + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | fn | LGui | Play |App/Alt| | RAlt | [ | Home | ] |End/Ctl| + `-----------------------------------' `-----------------------------------' + ,--------------. ,-------------. + |Esc/Alt| num | | Left |Right | + ,------+-------+------| |------+------+------. + | | | PgUp | | Up | | | + |Space |LShift |------| |------|RShift|Space | + | | | PgDn | | Down | | | + `---------------------' `--------------------' + +## Numeric Layer +Numeric layer close to the TM when toggling `num`, with the following differences: + +- Numpad is displaced by 1 to the top left. +- Arrows are displaced by 1 to the left. +- Provides access to `F1`-`F12`, `caps-lock` and `num-lock`. + +The numeric layer is indicated with the left (red) led. Caps-lock is indicated with the right (blue) led. + + ,--------------------------------------------------. ,--------------------------------------------------. + | | F1 | F2 | F3 | F4 | F5 | | | | | | Tab | / | * | - | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | F6 | F7 | F8 | F9 | F10 | | | | | Home | 7 | 8 | 9 | + | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | F11 | F12 | | | |------| |------| Up | End | 4 | 5 | 6 | + | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | | | | Left | Down | Right| 1 | 2 | 3 |KpEnter | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | 0 | 00 | . |Etr/Ctl| + `----------------------------------' `-----------------------------------' + ,-------------. ,-------------. + | | | |n.lock|c.lock| + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' + +## Fn Layer +Activated simultaneously with the Numeric layer when holding the `fn` key. As on the TM, it provides access to the following features: +- `cut`, `copy` and `paste` +- `volume up`, `volume down` and `mute` — as opposed to the TM, these are only on left hand +- `previous track` and `next track` +- `calculator`, `mail` and `browser home` +- `insert`, `power`, `sleep`, `wake`, `print screen`, `scroll-lock` and `pause` + +Note: the `eject` key does not work due to jackhumbert/qmk_firmware#82 + + ,--------------------------------------------------. ,--------------------------------------------------. + | | | | | | |Insert| |Insert|Eject |Power |Sleep | Wake |PrtScr|ScrollLk| + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | | | | | |VolUp | | | | | | | | Pause | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | Calc | Mail |Browsr|------| |------| | | | | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | cut | copy |paste | Mute |VolDn | | | | | | | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | Next | | | + | Mute | |------| |------| | | + | | | | | Prev | | | + `--------------------' `--------------------' diff --git a/keyboards/ergodox/keymaps/tonyabra_osx/keymap.c b/keyboards/ergodox/keymaps/tonyabra_osx/keymap.c new file mode 100644 index 000000000..2a15fcb8d --- /dev/null +++ b/keyboards/ergodox/keymaps/tonyabra_osx/keymap.c @@ -0,0 +1,184 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | = | | - | 6 | 7 | 8 | 9 | 0 | Enter | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L | ; | '" | + * |--------+------+------+------+------+------| LGui | | LGui |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | L1 | ` | { | } | '" | | Left | Up | Down | Right| L2 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Del | Alt | | Alt | Ctrl | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, + TG(SYMB), KC_GRV, KC_LBRC, KC_RBRC,KC_QUOT, + KC_DELT,KC_LALT, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_MINS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENT, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LGUI, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_LEFT,KC_UP, KC_DOWN,KC_RIGHT, TG(MDIA), + KC_RALT, KC_RCTL, + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/tonyabra_osx/readme.md b/keyboards/ergodox/keymaps/tonyabra_osx/readme.md new file mode 100644 index 000000000..f9d76efc2 --- /dev/null +++ b/keyboards/ergodox/keymaps/tonyabra_osx/readme.md @@ -0,0 +1,5 @@ +# ErgoDox EZ OS X Simplified Configuration + +This keyboard configuration replaces the hyper and meh keys with the command key. It also removes all of the meta keys that require a "hold" because I found that I hesitate when I type, which can accidentally fire those combinations. On the upper left of the left hand, I mimicked the Mac placement of tab and escape, and on the upper right of the right hand, I placed an additional enter key for convenience when breezing through prompts. + +This is my standard working configuration for now, but I can see myself tweaking it as I use it more. I highly recommend you do the same.
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/townk_osx/config.h b/keyboards/ergodox/keymaps/townk_osx/config.h new file mode 100644 index 000000000..72d3e9670 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/config.h @@ -0,0 +1,44 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "../../config.h" +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +//#define DEBUG_MATRIX_SCAN_RATE +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 3000 + +#endif diff --git a/keyboards/ergodox/keymaps/townk_osx/keymap.c b/keyboards/ergodox/keymaps/townk_osx/keymap.c new file mode 100644 index 000000000..5043d49a0 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/keymap.c @@ -0,0 +1,285 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "action_util.h" +#include "led.h" +#include "keymap.h" +#include "timer.h" + +/* + +# Why this Layout + +This layout was based on Kinesis layout and other ErgoDox user layouts +available. It's target to be used on a MacOS but I'm pretty sure it can be +addapted to Windows and/or Linux easily. + +## Function Key + +The `fn` key work almost like it would in any other keyboard with the exception +it has a semi-sticky behavior. What does that mean? + +Well, if you press the `fn` and release it, the keyboard will be put on the +_function layout_ and the next key stroke will be processed as if the `fn` key +was pressed. Aftwards, the leyout get back to _normal_. If you hold `fn` and +press any other key, when you release them, the keyboard leyout is back to +_normal_. + +While pressing the `fn` with the left hand and strikeing the other keys on the +right hand is farly easy, the same cannot being said for the other keys on the +left side. So, instead of trying to do contorcionism with my left hand, I +decided to do a semi-sticky version of `fn`. This way, I can press the `fn` +key with my pinky, release it and press the `1` key to issue an `F1` to the +operating system. + +## Key-Pad Key + +The `key pad` key is a layout switch key. If pressed, it will put the keyboard +on the _key pad layout_ and stay there until key is pressed again. + +This is used to make the keyboard behave mostly like a **num pad keyboard**. + +## Notes +- Regardless in which layout you are, keys from other layouts are not + accessible. This means that if you are on the _key pad layout_, the left hand + will be pretty much unusable. + Of course that like anything else, there are exceptions to this rule. + Modifiers should remain accessible throughout the layers. +- The _shift key_ is, like the _function key_, also configured to have a sticky + behavior. +- All sticky keys have a timeout of 3 seconds. + +*/ +#define BASE 0 +#define KEYPAD 1 +#define FN 2 + +#define MACRO_TMUX_ESC 10 +#define MACRO_TMUX_PASTE 11 +#define MACRO_OSX_COPY 12 +#define MACRO_OSX_PASTE 13 + +#define M_TESC M(MACRO_TMUX_ESC) +#define M_TPASTE M(MACRO_TMUX_PASTE) +#define M_OSXCPY M(MACRO_OSX_COPY) +#define M_OSXPST M(MACRO_OSX_PASTE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | `~ | 1 | 2 | 3 | 4 | 5 | ESC | | Pwr | 6 | 7 | 8 | 9 | 0 | - _ | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | Tab | Q | W | E | R | T | F16 | | F17 | Y | U | I | O | P | = + | + * |-----------+------+------+------+------+------| Meh | | Meh |------+------+------+------+------+-----------| + * | \ (Ctrl) | A | S | D | F | G |------| |------| H | J | K | L | ; | ' " (Ctrl)| + * |-----------+------+------+------+------+------| F18 | | F19 |------+------+------+------+------+-----------| + * | LShift | Z | X | C | V | B | Hyper| | Hyper| N | M | , | . | / | RShift | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | FN | KPAD |LCtrl | LAlt | LGui | | RGui | RAlt | RCtrl| KPAD | FN | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | M(0) | M(1) | | M(2) | M(3) | + * ,------|------|------| |------+------+------. + * | | | Home | | PgUp | | | + * |Backsp| Del |------| |------| Enter| Space| + * | | | End | | PgDn | | | + * `--------------------' `--------------------' + * + * M(0) = Ctrk+A Esc + * (this is used to issue the Esc key to the Tmux application) + * M(1) = Ctrk+A P + * (this is used to issue the Paste key to the Tmux application) + * M(2) = Cmd+C + * M(3) = Cmd+V + */ +[BASE]=KEYMAP(//left half + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MEH_T(KC_F16), + CTL_T(KC_BSLS), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_FN2, KC_Z, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_F18), + KC_FN1, TG(KEYPAD), KC_LCTRL, KC_LALT, KC_LGUI, + M_TESC, M_TPASTE, + KC_HOME, + KC_BSPC, KC_DELT, KC_END, + //right half + KC_POWER, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + MEH_T(KC_F17), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTL_T(KC_QUOT), + ALL_T(KC_F19), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_FN2, + KC_RGUI, KC_RALT, CTL_T(KC_LBRC), KC_FN3, KC_FN1, + M_OSXCPY, M_OSXPST, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC), + +/* Keymap 1: KeyPad Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | | LClk | RClk | MClk | | | | BTab | Clear| / | * | ^ | ( | | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | M.Accel 2 | |ScrlUp| U |ScrlDn| | | | Tab | 7 | 8 | 9 | + | ) | | + * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| + * | M.Accel 1 | | L | D | R | |------| |------| 4 | 5 | 6 | - | | | + * |-----------+------+------+------+------+------| | |Return|------+------+------+------+------+-----------| + * | M.Accel 0 | |ScrlL | |ScrlR | | | | | 1 | 2 | 3 | = | | | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | | XXXX | | | | | 0 | . | , | XXXX | | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | XXXX | | + * | | |------| |------| XXXX | | + * | | | | | | XXXX | | + * `--------------------' `--------------------' + */ +[KEYPAD]=KEYMAP(//left half + KC_NO, KC_NO, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, KC_NO, KC_NO, + KC_MS_ACCEL2, KC_NO, KC_MS_WH_UP, KC_MS_U, KC_MS_WH_DOWN, KC_NO, KC_NO, + KC_MS_ACCEL1, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, + KC_MS_ACCEL0, KC_NO, KC_MS_WH_LEFT, KC_NO, KC_MS_WH_RIGHT, KC_NO, KC_NO, + KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + //right half + LSFT(KC_TAB), KC_CLEAR, KC_KP_SLASH, KC_KP_ASTERISK, KC_CIRCUMFLEX, KC_LPRN, KC_NO, + KC_TAB, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, KC_RPRN, KC_NO, + KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, KC_NO, KC_NO, + KC_KP_ENTER, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_EQUAL, KC_NO, KC_NO, + KC_KP_0, KC_KP_DOT, KC_KP_COMMA, KC_TRNS, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_TRNS, KC_NO), + +/* Keymap 2: Functions Layer + * + * ,-----------------------------------------------------. ,-----------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | Vol. Up | + * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| + * | | Stop | Rw | Rec | FF | | XXXX | | XXXX | | | | | | Vol. Down | + * |-----------+------+------+------+------+------| XXXX | | XXXX |------+------+------+------+------+-----------| + * | CapsLock | Eject| Prev | Play | Next | |------| |------| Left | Down | Up | Right| | Mute | + * |-----------+------+------+------+------+------| XXXX | | XXXX |------+------+------+------+------+-----------| + * | L Shift | | | | | | XXXX | | XXXX | | | | | | R Shift | + * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' + * | XXXXX | | XXXX | XXXX | XXXX | | XXXX | XXXX | XXXX | | XXXXX | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + * + * XXX = These keys are transparent keys that, when pressed, they issue the key from the previous layer. + */ +[FN]=KEYMAP(//left half + KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_NO, KC_MEDIA_STOP, KC_MEDIA_REWIND, KC_MEDIA_SELECT, KC_MEDIA_FAST_FORWARD, KC_NO, KC_TRNS, + KC_CAPS, KC_MEDIA_EJECT, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_NO, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO, + //right half + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLU, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_NO, KC_MUTE, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO)}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_ONESHOT(FN), + [2] = ACTION_MODS_ONESHOT(MOD_LSFT), // Sticky shift light. Tap for the next keypress to be shifted. Hold for regular shift. + [3] = ACTION_LAYER_TAP_KEY(KEYPAD, KC_RBRC), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + switch(id) { + case MACRO_TMUX_ESC: + if (record->event.pressed) { + return MACRO(D(LCTRL), T(A), U(LCTRL), D(ESC), END); + } + return MACRO(U(ESC), END); + case MACRO_TMUX_PASTE: + if (record->event.pressed) { + return MACRO(D(LCTRL), T(A), U(LCTRL), D(P), END); + } + return MACRO(U(P), END); + case MACRO_OSX_COPY: + if (record->event.pressed) { + return MACRO(D(LGUI), D(C), END); + } + return MACRO(U(C), U(LGUI), END); + case MACRO_OSX_PASTE: + if (record->event.pressed) { + return MACRO(D(LGUI), D(V), END); + } + return MACRO(U(V), U(LGUI), END); + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +uint8_t current_layer = BASE; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_led_all_off(); + ergodox_led_all_set(LED_BRIGHTNESS_LO); + + switch (layer) { + case BASE: + current_layer = BASE; + break; + case KEYPAD: + current_layer = KEYPAD; + break; + default: + // none + break; + } + + // layer leds + if (current_layer == KEYPAD) { + ergodox_right_led_3_on(); + } + + // capslock + if (host_keyboard_leds() & (3<<USB_LED_CAPS_LOCK)) { + ergodox_right_led_1_on(); + } + + // Temporary leds + + // The function layer takes over other layers and we need to reflect that on the leds. + // If the current layer is the BASE, we simply turn on the FN led, but if the current + // layer is the KEYPAD, than we must turn it off before turning on the FN led. + if (layer == FN && !has_oneshot_layer_timed_out()) { + ergodox_right_led_3_off(); + ergodox_right_led_2_on(); + } + + // if the shifted is pressed I show the case led in a brighter color. This is nice to + // differenciate the shift from the capslock. + // Notice that I make sure that we're not using the shift on a chord shortcut (pressing + // shift togather with other modifiers). + if((keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) && // is shift pressed and there is no other + !(keyboard_report->mods & (~MOD_BIT(KC_LSFT) & ~MOD_BIT(KC_RSFT)))) || // modifier being pressed as well + (get_oneshot_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) && !has_oneshot_mods_timed_out())) { // or the one shot shift didn't timed out + ergodox_right_led_1_set(LED_BRIGHTNESS_HI); + ergodox_right_led_1_on(); + } +}; diff --git a/keyboards/ergodox/keymaps/townk_osx/makefile.mk b/keyboards/ergodox/keymaps/townk_osx/makefile.mk new file mode 100644 index 000000000..c06021b9f --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/makefile.mk @@ -0,0 +1,2 @@ +# I don't want my keyboard blinking lights when is suppose to be asleep. +SLEEP_LED_ENABLE = no
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/townk_osx/readme.md b/keyboards/ergodox/keymaps/townk_osx/readme.md new file mode 100644 index 000000000..c2853ca17 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/readme.md @@ -0,0 +1,77 @@ +# Townk's Keymap + +Trying to take care of an enjury on my arm I borrow an ergonomic keyboard from +a frient ([Kinesis Advantage](http://www.kinesis-ergo.com/shop/advantage-pro-for-pc-mac/)). + +I really enjoyed my time with it but there were some anoyancies: + +* The curvature on the keys bothered me since I'm a Vim user and using the + motion keys on my editor was awkard. +* I had to spend too much time remapping the keyboard to make some symbol keys + more accessible to me. +* The fact that my hands had to stay close to each other was a bit stressfull + to my sholders. + +After a long research I find out that Ergodox EZ would be perfect for my needs +and purchase one. Before the keyboard even got in my hands I started to think +on the layout I would use on it and soon enough I planed couple adjustments +from the Kinesis I was using so far. + +## The layout + +Here are the layout mapping in images so you can have a glimpse on it: + + + + + +Notice that, differently from the default behavior, my layer keys are not transparent +by default, which means that if you press any non-labeled white key, nothing will be +handled to the OS. + +### One shot keys + +It all started with the access to the function keys (F1, F2, F3...), since +those keys are located on a different layer I needed a way to press them with +minimal effort without disrupting my flow. + +For me, togglihg a layer to press a button and than toggle it back is a waste +of time (although I admit it's a single tap from what I have), so I decided to +do it as a one shot key. I could press it and the next pressed key would be +handled by the target layer which just after it delivers the key to the OS it +would get back to the previous layer. + +After setting up my layout to do just that I realized that occasionally I +would stop myseld on the middle of the process and the one shot layer would be +still triggered until I press any other key. So to prevent me from tapping +keys I don't want I added a timeout of 3 seconds for the one shot actions. + +Ultimately I tested the shift key as a one shot one and really like it, so +here you have it, all the one shot keys on my layout. + +## Glossary + +If you're not familiar with the Mac symbols used on some keys, here is a +reference to them: + +| Symbol | Description | +| :----: | ------------------- | +| ⌘ | Command | +| ⇪ | Caps Lock | +| ⇧ | Shift | +| ⌥ | Option (alt) | +| ⎋ | Esc | +| ⇥ | Tab forward | +| ⇤ | Tab backward | +| ⌃ | Control | +| ␣ | Space | +| ⌫ | Backspace | +| ⌦ | Delete | +| ⏎ | Enter | +| ⌤ | Return | +| ⌽ | Power on/off button | +| ↖ | Home | +| ↘ | End | +| ⇞ | Page up | +| ⇟ | Page down | +| ⌧ | Clear | diff --git a/keyboards/ergodox/keymaps/townk_osx/townk_osx_base.png b/keyboards/ergodox/keymaps/townk_osx/townk_osx_base.png Binary files differnew file mode 100644 index 000000000..f9bc8b443 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/townk_osx_base.png diff --git a/keyboards/ergodox/keymaps/townk_osx/townk_osx_fn.png b/keyboards/ergodox/keymaps/townk_osx/townk_osx_fn.png Binary files differnew file mode 100644 index 000000000..983b72348 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/townk_osx_fn.png diff --git a/keyboards/ergodox/keymaps/townk_osx/townk_osx_keypad.png b/keyboards/ergodox/keymaps/townk_osx/townk_osx_keypad.png Binary files differnew file mode 100644 index 000000000..8f04b4327 --- /dev/null +++ b/keyboards/ergodox/keymaps/townk_osx/townk_osx_keypad.png diff --git a/keyboards/ergodox/keymaps/twey/keymap.c b/keyboards/ergodox/keymaps/twey/keymap.c new file mode 100644 index 000000000..5deacd63f --- /dev/null +++ b/keyboards/ergodox/keymaps/twey/keymap.c @@ -0,0 +1,221 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_plover.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define STEN 2 // steno +#define MDIA 3 // media keys + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,---------------------------------------------------. ,---------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | STEN | | NONE | 6 | 7 | 8 | 9 | 0 | \ | + * |--------+------+------+------+-------+-------------| |-------+------+------+------+------+------+--------| + * | Del | ' | , | . | P | Y | Esc | | Caps | F | G | C | R | L | / | + * |--------+------+------+------+-------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | O | E | U | I |------| |-------| D | H | T | N | S | - | + * |--------+------+------+------+-------+------| Tab | | Enter |------+------+------+------+------+--------| + * | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | RShift | + * `--------+------+------+------+-------+-------------' `--------------+------+------+------+------+--------' + * | L1 | NONE | Grv | Left | Right | | Up | Down | [ | ] | L1 | + * `-----------------------------------' `----------------------------------' + * ,--------------. ,---------------. + * | PgUp | PgDn | | Home | End | + * ,------|-------|------| |-------+-------+------. + * | | | NONE | | AltGr | | | + * | Alt | Enter |------| |-------| Space | Ctrl | + * | | | Supr | | ~MDIA | | | + * `---------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, M(0), + KC_DELT, KC_QUOT, KC_COMM,KC_DOT, KC_P, KC_Y, KC_ESC, + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_TAB, + MO(SYMB), KC_NO, KC_GRV, KC_LEFT,KC_RGHT, + KC_PGUP,KC_PGDN, + KC_NO, + KC_LALT,KC_ENT ,KC_LGUI, + // right hand + KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + KC_CAPS, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + KC_ENT, KC_B, KC_M, KC_W, KC_V, KC_Z , KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, MO(SYMB), + KC_HOME, KC_END, + KC_RALT, + MO(MDIA),KC_SPC,KC_RCTL + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +[STEN] = KEYMAP( // layout: layer 2: Steno for Plover + // left hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_STAR, + KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, + KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, + KC_TRNS,KC_NO, KC_NO, KC_TRNS, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + PV_A, PV_O, KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + PV_STAR, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, + PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, + PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, + KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, + KC_NO, KC_NO, + KC_NO, + KC_TRNS,PV_E, PV_U +), + +/* Keymap 3: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | Back | | Frwd | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | Prev | Play | Next | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK, KC_TRNS, KC_WFWD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(MDIA) // FN1 - Momentary Layer 3 (Media) +}; + +void toggle_steno(int pressed) +{ + uint8_t layer = biton32(layer_state); + + if (pressed) { + if (layer != STEN) layer_on(STEN); else layer_off(STEN); + + register_code(PV_LP); + register_code(PV_LH); + register_code(PV_LR); + register_code(PV_O); + register_code(PV_RL); + register_code(PV_RG); + } else { + unregister_code(PV_LP); + unregister_code(PV_LH); + unregister_code(PV_LR); + unregister_code(PV_O); + unregister_code(PV_RL); + unregister_code(PV_RG); + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + toggle_steno(record->event.pressed); + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint32_t layer0 = layer_state & (1UL << 0), + layer1 = layer_state & (1UL << 1), + layer2 = layer_state & (1UL << 2), + layer3 = layer_state & (1UL << 3); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + + if (layer1) ergodox_right_led_1_on(); + if (layer2) ergodox_right_led_2_on(); + if (layer3) ergodox_right_led_3_on(); +}; diff --git a/keyboards/ergodox/keymaps/twey/readme.md b/keyboards/ergodox/keymaps/twey/readme.md new file mode 100644 index 000000000..979e4261e --- /dev/null +++ b/keyboards/ergodox/keymaps/twey/readme.md @@ -0,0 +1,17 @@ +# Twey's Home Configuration +## Layers +- Layer 0: Non-ANSI Dvorak layout, with modified modifiers — all + modifiers on thumb keys, as well as return and space. +- Layer 1: Default symbol layout. +- Layer 2: Plover-oriented stenography layer. +- Layer 3: Extended media/mouse layout. + +## Unusual features +The Plover key (top right key on the left half) also sends my Plover +‘toggle’ chord (SH-FT) when pressed, as well as toggling the steno +layer, so you can toggle between steno and typing modes with a single +keypress. + +If you want to use this feature, you'll need to add the +`commands.json` dictionary to your Plover dictionaries, or define the +toggle stroke (`PHROLG`) yourself. diff --git a/keyboards/ergodox/keymaps/workman_osx_mdw/keymap.c b/keyboards/ergodox/keymaps/workman_osx_mdw/keymap.c new file mode 100644 index 000000000..c05a1018d --- /dev/null +++ b/keyboards/ergodox/keymaps/workman_osx_mdw/keymap.c @@ -0,0 +1,366 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +// readme +// This keyboard layout is based on the [Workman Dead layout](https://github.com/ojbucao/Workman/tree/master/mac#workman-dead-for-programmers), which uses the comma as a dead key to trigger a second layer. +// Since I have more keys at my disposal on the ErgoDox, I moved the dead key to the bottom right. There are still a lot of +// blanks so still discovering what I like. +// If you aren't familiar with a dead key, the idea is that you tap the dead key which switches the layout. the next key you hit +// triggers the key you pressed AND switches the layout back to the original. For now I do this with a super kludgey macro and I +// look forward to learning about a more elegant way to do the same thing. Until then, this will have to do. + + +// TODO: Define layer names that make sense for the ErgoDox EZ. +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define DEAD 3 // dead version of the symbols layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | D | R | W | B | L1 | | L1 | J | F | U | P | ; | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Hyper | A | S | H | T | G |------| |------| Y | N | E | O | I | ' | + * |--------+------+------+------+------+------| | | Meh |------+------+------+------+------+--------| + * | LShift | Z | X | M | C | V | | | | K | L | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | CTRL | OPT | CMD | | Left | Down | Up | Right| L3 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * |Bckspc| Space|------| |------| Space |Enter | + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, TG(1), + ALL_T(KC_ESC), KC_A, KC_S, KC_H, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_NO, + KC_NO, KC_NO, KC_LCTL,KC_LALT,KC_LGUI, + KC_NO, KC_NO, + KC_HOME, + KC_BSPC,KC_SPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(1), KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSLS, + KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, + MEH_T(KC_NO),KC_K, KC_L, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, KC_FN4, + KC_NO, KC_NO, + KC_PGUP, + KC_PGDN,KC_SPC,KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | % | & | ? | + | @ | | | | $ | _ | [ | ] | ! | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | / | ( | = | 0 | { |------| |------| } | 1 | * | ) | - | " | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 6 | 7 | 8 | 9 | | | | | | \ | 2 | 3 | 4 | 5 | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_PERC, KC_AMPR, LSFT(KC_SLSH), LSFT(KC_EQL), KC_AT, KC_TRNS, + KC_TRNS, KC_SLSH, KC_LPRN, KC_EQL, KC_0, LSFT(KC_LBRC), + KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_PIPE, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_DLR, KC_UNDERSCORE, KC_LBRC, KC_RBRC, KC_EXLM, KC_F12, + KC_RCBR, KC_1, KC_ASTR, KC_RPRN, KC_MINS, KC_QUOT, + KC_TRNS, KC_SLSH, KC_2, KC_3, KC_4, KC_5, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +/* Keymap 4: Dead Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | % | & | ? | + | @ | | | | $ | _ | [ | ] | ! | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | / | ( | = | 0 | { |------| |------| } | 1 | * | ) | - | " | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | 6 | 7 | 8 | 9 | | | | | | \ | 2 | 3 | 4 | 5 | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[DEAD] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, M(100), M(101), M(102), M(103), M(104), KC_TRNS, + KC_TRNS, M(109), M(110), M(111), M(112), M(113), + KC_TRNS, M(120), M(121), M(122), M(123), M(124), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, M(105), M(106), M(107), M(108), M(130), KC_F12, + M(114), M(115), M(116), M(117), M(118), M(119), + KC_TRNS, M(125), M(126), M(127), M(128), M(129), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB), // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_LAYER_ON(BASE,0), // FN2 - Go back to the base layer + [3] = ACTION_LAYER_ON(DEAD,0), + [4] = ACTION_LAYER_TOGGLE(DEAD), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + case 100: + layer_clear(); + return MACRODOWN(D(LSFT), T(5), U(LSFT), T(FN4), END); + break; + case 101: + layer_clear(); + return MACRODOWN(D(LSFT), T(7), U(LSFT), T(FN4), END); + break; + case 102: + layer_clear(); + return MACRODOWN(D(LSFT), T(SLSH), U(LSFT), T(FN4), END); + break; + case 103: + layer_clear(); + return MACRODOWN(D(LSFT), T(EQL), U(LSFT), T(FN4), END); + break; + case 104: + layer_clear(); + return MACRODOWN(D(LSFT), T(2), U(LSFT), T(FN4), END); + break; + case 105: + layer_clear(); + return MACRODOWN(D(LSFT), T(4), U(LSFT), T(FN4), END); + break; + case 106: + layer_clear(); + return MACRODOWN(D(LSFT), T(MINS), U(LSFT), T(FN4), END); + break; + case 107: + layer_clear(); + return MACRODOWN(T(LBRC), T(FN4), END); + break; + case 108: + layer_clear(); + return MACRODOWN(T(RBRC), T(FN4), END); + break; + case 130: + layer_clear(); + return MACRODOWN(D(LSFT), T(1), U(LSFT), T(FN4), END); + break; + case 109: + layer_clear(); + return MACRODOWN(T(SLSH), T(FN4), END); + break; + case 110: + layer_clear(); + return MACRODOWN(D(LSFT), T(9), U(LSFT), T(FN4), END); + break; + case 111: + layer_clear(); + return MACRODOWN(T(EQL), T(FN4), END); + break; + case 112: + layer_clear(); + return MACRODOWN(T(0), T(FN4), END); + break; + case 113: + layer_clear(); + return MACRODOWN(D(LSFT), T(LBRC), U(LSFT), T(FN4), END); + break; + case 114: + layer_clear(); + return MACRODOWN(D(LSFT), T(RBRC), U(LSFT), T(FN4), END); + break; + case 115: + layer_clear(); + return MACRODOWN(T(1), T(FN4), END); + break; + case 116: + layer_clear(); + return MACRODOWN(D(LSFT), T(8), U(LSFT), T(FN4), END); + break; + case 117: + layer_clear(); + return MACRODOWN(D(LSFT), T(0), U(LSFT), T(FN4), END); + break; + case 118: + layer_clear(); + return MACRODOWN(T(MINS), T(FN4), END); + break; + case 119: + layer_clear(); + return MACRODOWN(D(LSFT), T(QUOT), U(LSFT), T(FN4), END); + break; + case 120: + layer_clear(); + return MACRODOWN(T(6), T(FN4), END); + break; + case 121: + layer_clear(); + return MACRODOWN(T(7), T(FN4), END); + break; + case 122: + layer_clear(); + return MACRODOWN(T(8), T(FN4), END); + break; + case 123: + layer_clear(); + return MACRODOWN(T(9), T(FN4), END); + break; + case 124: + layer_clear(); + return MACRODOWN(D(LSFT), T(BSLS), U(LSFT), T(FN4), END); + break; + case 125: + layer_clear(); + return MACRODOWN(T(BSLS), T(FN4), END); + break; + case 126: + layer_clear(); + return MACRODOWN(T(2), T(FN4), END); + break; + case 127: + layer_clear(); + return MACRODOWN(T(3), T(FN4), END); + break; + case 128: + layer_clear(); + return MACRODOWN(T(4), T(FN4), END); + break; + case 129: + layer_clear(); + return MACRODOWN(T(5), T(FN4), END); + break; + + default: + return MACRO_NONE; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/zweihander-osx/keymap.c b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c new file mode 100644 index 000000000..40b1d7d6d --- /dev/null +++ b/keyboards/ergodox/keymaps/zweihander-osx/keymap.c @@ -0,0 +1,233 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +#define SGWK 0 // "sagewick", ⌘S ⌘⇥ +#define SGWF 1 // "sagewick freshly", ⌘S ⌘⇥ ⌘R +#define BBED 2 // BBEdit +#define TMNL 3 // Terminal +#define SAFA 4 // Safari +#define ALFRED_LEAD_TIME 100 // time, in milliseconds, to let Alfred come to the fore and accept keyboard input + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | L1 | | L1 | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ⌦ | Q | W | E | R | T | ~L1 | | ~L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ⌫ | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' / L⌘ | + * |--------+------+------+------+------+------| L⌘ | | L⌘ |------+------+------+------+------+--------| + * | L⇧ | Z | X | C | V | B | | | | N | M | , | . | / / ⌃| R⇧ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | L⌃ | L⌥ | L⌘ | ← | → | | ↑ | ↓ | [ | ] | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | `~ | '" | | ⎋ | ⌫ | + * ,------|------|------| |------+--------+------. + * | | | PgUp | | PgDn | | | + * | | ⌫ |------| |------| ⇥ |Enter | + * | | | L⌥ | | L⌃ | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, TG(SYMB), + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, + KC_LCTL, KC_LALT, KC_LGUI,KC_LEFT,KC_RGHT, + KC_GRV, KC_QUOT, + KC_PGUP, + KC_SPC,KC_BSPC,KC_LALT, + // right hand + TG(SYMB), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + MO(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + KC_LGUI, KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_SPC , + KC_ESC, KC_BSPC, + KC_PGDN, + KC_LCTL, KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | [ | ] | { | } | " | | | | / | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | < | > | ( | ) | ' |------| |------| - | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | & | 1 | 2 | 3 | = | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | . | ← | → | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | Home | | | + * | | |------| |------| | | + * | | | | | End | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_LBRC,KC_RBRC,KC_LCBR,KC_RCBR,KC_DQUO,KC_TRNS, + KC_TRNS,KC_LABK,KC_RABK,KC_LPRN,KC_RPRN,KC_QUOT, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_SLSH, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_MINS, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_EQL, KC_TRNS, + KC_0, KC_DOT, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_HOME, + KC_END , KC_TRNS, KC_TRNS +), +/* Keymap 2: Media keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F14 | F15 | | | | | | ⌘Q | ⌘W | ⌘⇧` | ⌘` | | | Power | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | PgUp |⌘S⌘⇥⌘R| Term | | | | ⌘] | ⌥⌘↑ | ↑ | ⌥⌘↓ | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |Safari| PgDn | | |------| |------| ⌘[ | ← | ↓ | → | | ⏯ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | |BBEdit| | | |L⇧+Spc| Spc | ⏮ | ⏭ | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | Home | | End | | | + * | | |------| |------| ⌘C | ⌘V | + * | | | | | ⌘X | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_F14 , KC_F15 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, /* F14 dims screen, F15 brightens */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, M(SGWF), M(TMNL), KC_TRNS, + KC_TRNS, KC_TRNS, M(SAFA), KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(BBED), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_HOME, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + LGUI(KC_Q), LGUI(KC_W), LGUI(LSFT(KC_GRV)), LGUI(KC_GRV), KC_TRNS, KC_TRNS, KC_PWR, + KC_TRNS, LGUI(KC_RBRC), LGUI(LALT(KC_UP)), KC_UP , LGUI(LALT(KC_DOWN)), KC_TRNS, KC_TRNS, + LGUI(KC_LBRC), KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_MPLY, + KC_TRNS, LSFT(KC_SPC), KC_SPC , KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + LGUI(KC_X), LGUI(KC_C), LGUI(KC_V) +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case SGWK: + if (record->event.pressed) { + return MACRO( + I(10), + D(LGUI), T(S), U(LGUI), + D(LGUI), T(TAB), U(LGUI), + END); + } + break; + case SGWF: + if (record->event.pressed) { + return MACRO( + I(10), + D(LGUI), T(S), U(LGUI), + D(LGUI), T(TAB), U(LGUI), + D(LGUI), T(R), U(LGUI), + END); + } + break; + case BBED: + if (record->event.pressed) { + return MACRO( + I(10), + D(LALT), T(SPC), U(LALT), W(ALFRED_LEAD_TIME), + T(B), T(B), T(E), T(D), T(I), T(T), + T(ENT), + END); + } + break; + case TMNL: + if (record->event.pressed) { + return MACRO( + I(10), + D(LALT), T(SPC), U(LALT), W(ALFRED_LEAD_TIME), + T(T), T(E), T(R), T(M), T(I), T(N), T(A), T(L), + T(ENT), + END); + } + break; + case SAFA: + if (record->event.pressed) { + return MACRO( + I(10), + D(LALT), T(SPC), U(LALT), W(ALFRED_LEAD_TIME), + T(S), T(A), T(F), T(A), T(R), T(I), + T(ENT), + END); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown new file mode 100644 index 000000000..3b7f52941 --- /dev/null +++ b/keyboards/ergodox/keymaps/zweihander-osx/readme.markdown @@ -0,0 +1,45 @@ +# The Zweihander Layout + +NB: the backtick (\`) is special in Markdown. If I write ⌘\` in this readme, I mean “command-backtick”, not “command-backslash-backtick”. + +This layout is tuned for people who… + + +## use OS X + +This layout doesn’t make any concessions for Windows use. While it should work fine in Windows, I’m not about to devote precious keyboard space to Windows-specific shortcuts. + + +## mouse left-handed while doing other things with the right hand + +I tend to have my mouse in my left hand, but I like to use my other hand to make things go faster. I’ve added a bunch of buttons to the media layer to speed up browsing in Safari and Finder: + +- Close Window (⌘W) +- Back (⌘[) +- Forward (⌘]) +- Open and Close Parent Folder (⌥⌘↓) +- Go Up and Close Just-Left Folder (⌥⌘↑) +- Cycle through open windows in current application (⌘\` and ⌘⇧\`) +- Cycle through tabs in current window (⌥⇥ and ⌥⇧⇥) +- Space (page down in browsers; Quick Look in the Finder) +- Shift-Space (page up in web browsers) + +Because moving letter-by-letter is way slower than moving word-by-word, I added Option (⌥) to the bottommost button on the left side. This key can be held easily while holding ; (activate media layer) and pressing J and L to move left and right by word. + + +## use lots of modifier keys in OS X menu-item shortcuts + +I wanted to preserve the feel of a number of shortcuts that involve pressing lots of modifier keys at once; this is why the bottom left of the keyboard has shift, control, option, and command in the usual spaces. Further, some common shortcuts I press have a key on the right side of the keyboard. These shortcuts include: + +- Empty Trash Without Asking for Confirmation (⇧⌥⌘⌫) +- Shut Down Without Asking for Confirmation (⇧⌥⌘ power) + + +## use Emacs-style shortcuts + +I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the control key on the bottom left and I’m too quick on the draw for the control function on the / key to work reliably, so the bottommost thumb button on the right side is another control key. + + +## use spreadsheets + +All the common spreadsheet operations (+-*/=) are now on the right side of the symbol layer. There’s also a colon there for entering times and maybe IPv6 addresses. Not that I expect people to type IPv6 addresses into a spreadsheet, but, y’know. diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md new file mode 100644 index 000000000..9afa47410 --- /dev/null +++ b/keyboards/ergodox/readme.md @@ -0,0 +1,49 @@ +# Getting started + +There are two main ways you could customize the ErgoDox (EZ and Infinity) + +## The Easy Way: Use an existing firmware file and just flash it + +This does not work for Infinity ErgoDox yet, you need to compile the firmware according to the instructions below + +1. Download and install the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). Some Linux distributions already provide a binary (may be called `teensy-loader-cli`), so you may prefer to use this. +2. Find a firmware file you like. You can find a few of these in the keymaps subdirectory right here. The file you need ends with .hex, and you can look at its .c counterpart (or its PNG image) to see what you'll be getting. You can also use the [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) to create a firmware Hex file you like. +3. Download the firmware file +4. Connect the keyboard, press its Reset button (gently insert a paperclip into the hole in the top-right corner) and flash it using the Teensy loader you installed on step 1 and the firmware you downloaded. + +## More technical: compile an existing keymap, or create your own totally custom firmware by editing the source files. + +This requires a little bit of familiarity with coding. +If you are just compiling an existing keymap and don't want to create your own, you can skip step 4, 5 and 8. + +1. Go to https://github.com/jackhumbert/qmk_firmware and read the readme at the base of this repository, top to bottom. Then come back here :) +2. Clone the repository (download it) +3. Set up a build environment as per [the build guide](/doc/BUILD_GUIDE.md) + - Using a Mac and have homebrew? just run `brew tap osx-cross/avr && brew install avr-libc` +4. Copy `keyboards/ergodox/keymaps/default/keymap.c` into `keymaps/your_name/keymap.c` (for example, `keymaps/german/keymap.c`) +5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. See below for more tips on sharing your work. +6. Compile your firmware by running `make keymap=keymap_name`. For example, `make keymap=german`. This will result in a hex file, which will be called `ergodox_ez_keymap_name.hex`, e.g. `ergodox_ez_german.hex`. For **Infinity ErgoDox** you need to add `subproject=infinity` to the make command. +7. **ErgoDox EZ** - Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. If you prefer you can automatically flash the hex file after successful build by running `make teensy keymap=keymap_name`. + + **Infinity ErgoDox** - Flash the firmware by running `make dfu-util keymap=keymap_name subproject=infinity` +8. Submit your work as a pull request to this repository, so others can also use it. :) See below on specifics. + +Good luck! :) + +## Contributing your keymap + +The ErgoDox firmware is open-source, so it would be wonderful to have your contribution! Within a very short time after launching we already amassed almost 20 user-contributed keymaps, with all sorts of creative improvements and tweaks. This is very valuable for people who aren't comfortable coding, but do want to customize their ErgoDox. To make it easy for these people to use your layout, I recommend submitting your PR in the following format. + +1. All work goes inside your keymap subdirectory (`keymaps/german` in this example). +2. `keymap.c` - this is your actual keymap file; please update the ASCII comments in the file so they correspond with what you did. +3. `readme.md` - a readme file, which GitHub would display by default when people go to your directory. Explain what's different about your keymap, what you tweaked or how it works. No specific format to follow, just communicate what you did. :) +4. Any graphics you wish to add. This is absolutely not a must. If you feel like it, you can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to make something and grab a screenshot, but it's really not a must. If you do have graphics, your readme can just embed the graphic as a link, just like I did with the default layout. + + +## Finding the keycodes you need + +Let's say you want a certain key in your layout to send a colon; to figure out what keycode to use to make it do that, you're going to need `quantum/keymap_common.h`. + +That file contains a big list of all of the special, fancy keys (like, being able to send % on its own and whatnot). + +If you want to send a plain vanilla key, you can look up its code under `doc/keycode.txt`. That's where all the boring keys hang out. diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile new file mode 100644 index 000000000..39a9cc0ae --- /dev/null +++ b/keyboards/gh60/Makefile @@ -0,0 +1,74 @@ +
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes # Console for debug(+400)
+# COMMAND_ENABLE ?= yes # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+ifndef QUANTUM_DIR
+ include ../../Makefile
+endif
+
diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h new file mode 100644 index 000000000..4813c4e78 --- /dev/null +++ b/keyboards/gh60/config.h @@ -0,0 +1,161 @@ +/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+ #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c new file mode 100644 index 000000000..255d87de9 --- /dev/null +++ b/keyboards/gh60/gh60.c @@ -0,0 +1,25 @@ +#include "gh60.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ gh60_caps_led_on();
+ } else {
+ gh60_caps_led_off();
+ }
+
+ // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+ // gh60_esc_led_on();
+ // } else {
+ // gh60_esc_led_off();
+ // }
+
+ // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+ // gh60_fn_led_on();
+ // } else {
+ // gh60_fn_led_off();
+ // }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h new file mode 100644 index 000000000..ca30562a4 --- /dev/null +++ b/keyboards/gh60/gh60.h @@ -0,0 +1,74 @@ +#ifndef GH60_H
+#define GH60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* GH60 LEDs
+ * GPIO pads
+ * 0 F7 WASD LEDs
+ * 1 F6 ESC LED
+ * 2 F5 FN LED
+ * 3 F4 POKER Arrow LEDs
+ * B2 Capslock LED
+ * B0 not connected
+ */
+inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
+
+inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* GH60 keymap definition macro
+ * K2C, K31 and K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
+) KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
+ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
+ K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
+)
+
+#define KEYMAP_HHKB( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
+ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
+) KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
+ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
+)
+
+#endif
diff --git a/keyboards/gh60/gh60revc.jpg b/keyboards/gh60/gh60revc.jpg Binary files differnew file mode 100644 index 000000000..6c88ad244 --- /dev/null +++ b/keyboards/gh60/gh60revc.jpg diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c new file mode 100644 index 000000000..3622be41b --- /dev/null +++ b/keyboards/gh60/keymaps/default/keymap.c @@ -0,0 +1,69 @@ +#include "gh60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ + LSFT,FN1, Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, RSFT, \ + LCTL,LGUI,LALT, SPC, BSLS,RALT,RGUI,APP, RCTL), + /* 1: fn */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, \ + TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + /* 2: arrows */ + KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,LEFT,DOWN,RGHT), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [1] = ACTION_LAYER_TOGGLE(2), // toggle arrow overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +//Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + gh60_wasd_leds_on(); + gh60_fn_led_on(); + } else { + gh60_wasd_leds_off(); + gh60_fn_led_off(); + } + + if (layer & (1<<2)) { + gh60_poker_leds_on(); + gh60_esc_led_on(); + } else { + gh60_poker_leds_off(); + gh60_esc_led_off(); + } + +}; diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile new file mode 100644 index 000000000..2e69aee29 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile @@ -0,0 +1,112 @@ +#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes # Console for debug(+400)
+# COMMAND_ENABLE ?= yes # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
diff --git a/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg b/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg Binary files differnew file mode 100644 index 000000000..4ab8cc31a --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/WS2812-wiring.jpg diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h new file mode 100644 index 000000000..8272875ed --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -0,0 +1,190 @@ +/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+ #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ *
+ *
+ * #define ws2812_PORTREG PORTF
+ * #define ws2812_DDRREG DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14 // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG PORTF
+#define ws2812_DDRREG DDRF
+#define ws2812_pin PF4
+*/
+#define RGB_DI_PIN F4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c new file mode 100644 index 000000000..263eec4e5 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/keymap.c @@ -0,0 +1,226 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _BL 0 +#define _AL 1 +#define _FL 2 +#define _UL 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * Base layer, pretty standard ANSI layout. + * ,-----------------------------------------------------------. + * |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + [_BL] = KEYMAP( + FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \ + TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \ + FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \ + LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \ + LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), + + /* + * Locking arrow keys to WASD for when you need dedicated arrow keys + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Up | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |Left|Down|Rght| | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_AL] = KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + + + /* + * Primary function layer, mostly the same as the traditional Pok3r layout. + * ,-------------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-------------------------------------------------------------| + * | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | + * |-------------------------------------------------------------| + * | | | | | | |Home|Left|Down|Rght|Ins| | | + * |-------------------------------------------------------------| + * | |_UL| | | | | | | | | | | + * |-------------------------------------------------------------| + * | | | | | | | | | + * `-------------------------------------------------------------' + */ + [_FL] = KEYMAP( + GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \ + TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \ + TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + + /* + * Locking layer for controlling the underglow. + * + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |On|Mode| | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_UL] = KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay + [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay + [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer + [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay + [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow + [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode + [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [12] = ACTION_FUNCTION(SHIFT_ESC), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +// Layer LED indicators +// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster + uint32_t layer = layer_state; + if (layer & (1<<1)) { + gh60_wasd_leds_on(); + } else { + gh60_wasd_leds_off(); + } + + if (layer & (1<<2)) { + gh60_esc_led_on(); + } else { + gh60_esc_led_off(); + } +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + static uint8_t shift_esc_shift_mask; + // Shift + ESC = ~ + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}; diff --git a/keyboards/gh60/keymaps/robotmaxtron/readme.md b/keyboards/gh60/keymaps/robotmaxtron/readme.md new file mode 100644 index 000000000..3e2292500 --- /dev/null +++ b/keyboards/gh60/keymaps/robotmaxtron/readme.md @@ -0,0 +1,16 @@ +robotmaxtron's GH60 Layout +===================== + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard ANSI layout with Pok3r styled function layers +* ESC key led enables when on function layer +* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer +* Neopixel/WS2812 RGB Underglow Support + +## Reference Images +![Wiring Refererence] (WS2812-wiring.jpg) + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt new file mode 100644 index 000000000..3787f938e --- /dev/null +++ b/keyboards/gh60/pinout.txt @@ -0,0 +1,18 @@ + /* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
+ */
+
+ /* Row pin configuration
+ * row: 0 1 2 3 4
+ * pin: D0 D1 D2 D3 D5
+ */
+
+ GPIO pads
+ 0 F7 WASD LEDs
+ 1 F6 ESC LED
+ 2 F5 FN LED
+ 3 F4 POKER Arrow LEDs
+
+ B2 Capslock LED
+ B0 not connected
\ No newline at end of file diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md new file mode 100644 index 000000000..92302d507 --- /dev/null +++ b/keyboards/gh60/readme.md @@ -0,0 +1,60 @@ +## gh60 Rev C keyboard firmware
+
+
+
+ /* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
+ */
+
+ /* Row pin configuration
+ * row: 0 1 2 3 4
+ * pin: D0 D1 D2 D3 D5
+ */
+
+ GPIO pads
+ 0 F7 WASD LEDs
+ 1 F6 ESC LED
+ 2 F5 FN LED
+ 3 F4 POKER Arrow LEDs
+
+ B2 Capslock LED
+ B0 not connected
+
+Functions to controls LED clusters
+
+ gh60_caps_led_on()
+ gh60_poker_leds_on()
+ gh60_fn_led_on()
+ gh60_esc_led_on()
+ gh60_wasd_leds_on()
+
+ gh60_caps_led_off()
+ gh60_poker_leds_off()
+ gh60_fn_led_off()
+ gh60_esc_led_off()
+ gh60_wasd_leds_off()
+
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/handwired/CMD60/CMD60.c b/keyboards/handwired/CMD60/CMD60.c new file mode 100644 index 000000000..799848e34 --- /dev/null +++ b/keyboards/handwired/CMD60/CMD60.c @@ -0,0 +1,8 @@ +#include "CMD60.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/CMD60/CMD60.h b/keyboards/handwired/CMD60/CMD60.h new file mode 100644 index 000000000..f90871fc7 --- /dev/null +++ b/keyboards/handwired/CMD60/CMD60.h @@ -0,0 +1,20 @@ +#ifndef CMD60_H +#define CMD60_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO,K4A, K4B, K4C, K4D } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/CMD60/Makefile @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/CMD60/README.md b/keyboards/handwired/CMD60/README.md new file mode 100644 index 000000000..83e371543 --- /dev/null +++ b/keyboards/handwired/CMD60/README.md @@ -0,0 +1,35 @@ +CMD60 keyboard firmware +====================== + +##CMD60 + +This layout has been designed to optimize use of the left-hand, and it focussed specifically on programmers who work +with text editors like SublimeText and Atom. It utilizes the power of Space_fn, and features a caps lock swap for Fn2 +and enter key on tap. These features allow you to keep your right hand on the mouse more and should enable you to +achieve a higher level of productivity if you take the time to learn its function layers. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/handwired/CMD60 folder. +Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use +the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/handwired/CMD60/config.h b/keyboards/handwired/CMD60/config.h new file mode 100644 index 000000000..27eb400b8 --- /dev/null +++ b/keyboards/handwired/CMD60/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER cmd +#define PRODUCT CMD60 +#define DESCRIPTION Advanced Programming Keeb Layout + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, C6, D7, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/CMD60/keymaps/default/keymap.c b/keyboards/handwired/CMD60/keymaps/default/keymap.c new file mode 100644 index 000000000..9f9cbcd66 --- /dev/null +++ b/keyboards/handwired/CMD60/keymaps/default/keymap.c @@ -0,0 +1,66 @@ +#include "CMD60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* CMD60 - QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(3, KC_ENT), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, LT(2, KC_SPC), MO(3), MO(4), MO(5), TG(1) \ + ), + [1] = KEYMAP( /* CMD60 - GameMode */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_RSFT, \ + KC_TRNS, KC_NO, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [2] = KEYMAP( /* CMD60 - Arrows */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_BSPC, KC_UP, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_UP, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [3] = KEYMAP( /* CMD60 - Functions */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_AUDIO_MUTE, KC_BSPC, KC_PGUP, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_PAUSE, KC_SLCK, KC_PSCREEN, \ + KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_INSERT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [4] = KEYMAP( /* CMD60 - Mouse */ + KC_SYSTEM_SLEEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_WH_UP, KC_MS_BTN3, KC_MS_WH_DOWN, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [5] = KEYMAP( /* CMD60 - Media */ + KC_SYSTEM_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK, KC_MEDIA_PLAY_PAUSE, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WWW_BACK, KC_WWW_FORWARD, KC_NO, KC_NO, KC_WWW_REFRESH, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/handwired/Makefile b/keyboards/handwired/Makefile new file mode 100644 index 000000000..57493a47c --- /dev/null +++ b/keyboards/handwired/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/fivethirteen/Makefile b/keyboards/handwired/fivethirteen/Makefile new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/fivethirteen/Makefile @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/fivethirteen/README.md b/keyboards/handwired/fivethirteen/README.md new file mode 100644 index 000000000..b2e13cd6d --- /dev/null +++ b/keyboards/handwired/fivethirteen/README.md @@ -0,0 +1,28 @@ +fivethirteen keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/handwired/fivethirteen folder. +Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use +the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h new file mode 100644 index 000000000..76596342b --- /dev/null +++ b/keyboards/handwired/fivethirteen/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER rdg +#define PRODUCT fivethirteen +#define DESCRIPTION handwired 5x13 matrix keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F6, F7, B6, B5, B4 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, F0, D0, D1, D2, D3, C6, C7, D6, D7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/fivethirteen/fivethirteen.c b/keyboards/handwired/fivethirteen/fivethirteen.c new file mode 100644 index 000000000..4c16e72eb --- /dev/null +++ b/keyboards/handwired/fivethirteen/fivethirteen.c @@ -0,0 +1,8 @@ +#include "fivethirteen.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/fivethirteen/fivethirteen.h b/keyboards/handwired/fivethirteen/fivethirteen.h new file mode 100644 index 000000000..faa6de737 --- /dev/null +++ b/keyboards/handwired/fivethirteen/fivethirteen.h @@ -0,0 +1,21 @@ +#ifndef FIVETHIRTEEN_H +#define FIVETHIRTEEN_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, \ + k40, k41, k42, k43, k44, k46, k47, k48, k49, k410, k411, k412 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312 }, \ + { k40, k41, k42, k43, k44, KC_NO, k46, k47, k48, k49, k410, k411, k412 } \ +} + +#endif diff --git a/keyboards/handwired/fivethirteen/keymaps/default/keymap.c b/keyboards/handwired/fivethirteen/keymaps/default/keymap.c new file mode 100644 index 000000000..d718510d5 --- /dev/null +++ b/keyboards/handwired/fivethirteen/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +#include "fivethirteen.h" + +#define _______ KC_TRNS + +#define HDN 1 +#define OSY 2 +#define MOS 3 +#define CTL_ESC CTL_T(KC_ESC) +#define SFT_BSP SFT_T(KC_BSPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_BSLS, \ + MO(MOS), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC , SFT_BSP, MO(OSY), MO(HDN), KC_LEFT, KC_DOWN, KC_RGHT \ +), +[HDN] = KEYMAP( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, \ + _______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_ENT, _______, _______, _______, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, KC_HOME, KC_PGDN, KC_END \ +), +[OSY] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), +[MOS] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_BTN2, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_WH_D, KC_WH_U, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +}; diff --git a/keyboards/handwired/handwired.c b/keyboards/handwired/handwired.c new file mode 100644 index 000000000..feef8a919 --- /dev/null +++ b/keyboards/handwired/handwired.c @@ -0,0 +1 @@ +#include "handwired.h"
\ No newline at end of file diff --git a/keyboards/handwired/handwired.h b/keyboards/handwired/handwired.h new file mode 100644 index 000000000..7a4a4835e --- /dev/null +++ b/keyboards/handwired/handwired.h @@ -0,0 +1 @@ +#include "quantum.h"
\ No newline at end of file diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile new file mode 100644 index 000000000..c6d10856a --- /dev/null +++ b/keyboards/handwired/onekey/Makefile @@ -0,0 +1,65 @@ + + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/onekey/config.h b/keyboards/handwired/onekey/config.h new file mode 100644 index 000000000..c0a6b5839 --- /dev/null +++ b/keyboards/handwired/onekey/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +#define MANUFACTURER none +#define PRODUCT onekey +#define DESCRIPTION test board for qmk + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 1 + +#define MATRIX_COL_PINS { B0 } +#define MATRIX_ROW_PINS { D0 } +#define UNUSED_PINS + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/onekey/keymaps/default/keymap.c b/keyboards/handwired/onekey/keymaps/default/keymap.c new file mode 100644 index 000000000..756c4f51e --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/default/keymap.c @@ -0,0 +1,5 @@ +#include "onekey.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + { KC_A } +}; diff --git a/keyboards/handwired/onekey/onekey.c b/keyboards/handwired/onekey/onekey.c new file mode 100644 index 000000000..c79e0120e --- /dev/null +++ b/keyboards/handwired/onekey/onekey.c @@ -0,0 +1 @@ +#include "onekey.h"
\ No newline at end of file diff --git a/keyboards/handwired/onekey/onekey.h b/keyboards/handwired/onekey/onekey.h new file mode 100644 index 000000000..7a4a4835e --- /dev/null +++ b/keyboards/handwired/onekey/onekey.h @@ -0,0 +1 @@ +#include "quantum.h"
\ No newline at end of file diff --git a/keyboards/handwired/traveller/Makefile b/keyboards/handwired/traveller/Makefile new file mode 100644 index 000000000..12a4b71f4 --- /dev/null +++ b/keyboards/handwired/traveller/Makefile @@ -0,0 +1,89 @@ + +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# for avr upload +USB ?= /dev/cu.usbmodem1421 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER + ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# MCU name + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +upload: build + $(ATREUS_UPLOAD_COMMAND) + diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h new file mode 100644 index 000000000..2b82da447 --- /dev/null +++ b/keyboards/handwired/traveller/config.h @@ -0,0 +1,173 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT traveller +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D3, D2 } + // no I can't say why this order seemed like a good idea +#define MATRIX_COL_PINS { B5, D6, B7, B6, F6, B1, B3, F7, B4, E6, D7, C6, D4 } +#define UNUSED_PINS + +// LED stuff +#define RGB_DI_PIN B2 +//#define RBLIGHT_TIMER +#define RGBLED_NUM 1 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/traveller/keymaps/default/keymap.c b/keyboards/handwired/traveller/keymaps/default/keymap.c new file mode 100644 index 000000000..13d889ab8 --- /dev/null +++ b/keyboards/handwired/traveller/keymaps/default/keymap.c @@ -0,0 +1,305 @@ +#include "traveller.h" +#include "mousekey.h" +#include "action_layer.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +#define _QW 0 +#define _LW 1 +#define _HI 2 +#define _NAV 4 +#define _CUR 5 +#define _FKEYS 6 +#define _TRNS 8 + +// We do the same trick for functions +#define RGBLED_TOGGLE 10 +#define _HIOUT 15 +#define _LWOUT 16 +// Macros +#define MDL 4 +#define MDR 5 +#define MUR 6 +#define MUL 3 + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------. .-----------------------------------------. + * | NAV | ` ~ | W | E | R | T | | Y | U | I | O | - | = | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | S | D | F | G | | H | J | K | L | P | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + *|ctrl/esc| A | X | C | V | B |Ctrl /| N | M | , | . | ; | ' | + * |------+------+------+------+------+------+ // +------+------+------+------+------+------| + * | Shift| Z | Del | GUI | Low | Bspc |/Enter| Spc | Hi | GUI | Alt | / |Shift | + * `------------------------------------------------------------------------------------------' + * + */ +[_QW] = KEYMAP( + F(_NAV), KC_GRV, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_P, KC_BSLS, + CTL_T(KC_ESC), KC_A, KC_X, KC_C, KC_V, KC_B, KC_RCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_DEL, KC_LGUI, MO(_LW), KC_BSPC, KC_ENTER, KC_SPC, MO(_HI), KC_RGUI, KC_RALT, KC_SLSH, KC_RSFT + ), + +/* LOW - numbers, missing or awkward programming keys + Doubled 1 key allows lazy reach with ring finger. + * ,-----------------------------------------. .-----------------------------------------. + * | FKeys| 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 |Ctrl-alt-del| + * |------+------+------+------+------+------| +------+------+------+------+------+------| + * | Tab | 1 | ] | ( | ) | | | * | ( | ) | [ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + * | Caps | [ | | { | } | ` | /| # | { | } | | ] | | + * |------+------+------+------+------+------+ // +------+------+------+------+------+------| + * | Shift| | | | Low | |/ | | Hi | | | |Shift | + * `------------------------------------------------------------------------------------------' + * + */ + +[_LW] = KEYMAP( + F(_FKEYS), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, LCTL(LALT(KC_DEL)) , + KC_TRNS, KC_1, KC_RBRC, KC_LPRN, KC_RPRN, KC_NO, KC_ASTR, KC_LPRN, KC_RPRN, KC_LBRC, KC_NO, KC_NO, + KC_CAPS, KC_LBRC, KC_NO, KC_LCBR, KC_RCBR, KC_TILD, KC_TRNS, KC_HASH, KC_LCBR, KC_RCBR, KC_NO, KC_RBRC, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +/* HI - Punctuation, shell and +url ://@.com row on bottom, && is opposite || ^$ are in regex order: ^.*$ +Right hand nav keys work pretty well chorded with the Right hand Hi Key + * ,-----------------------------------------. .-----------------------------------------. + * |FKEYS | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | ! | & | "|" | $ | % | | Vol+| Mute| | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + * | CAPS | ^ | : | . | * | - | /| Vol-| Play | PgUp | Home | Up | End | + * |------+------+------+------+------+------+ // +------+------+------+------+------+------| + * | | / | | | Low | |/ | | Hi | PgDn | Left| Down | Right | + * `------------------------------------------------------------------------------------------' + * + */ + +[_HI] = KEYMAP( + F(_FKEYS), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, + KC_TRNS, KC_EXLM, KC_AMPR, KC_PIPE, KC_DLR, KC_PERC, KC_VOLU, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_NO, + KC_CAPS, KC_CIRC, KC_COLN, KC_DOT, KC_ASTR, KC_MINS, KC_TRNS, KC_VOLD, KC_PPLS, KC_PGUP, KC_HOME, KC_UP, KC_END, + KC_TRNS, KC_SLSH, KC_TRNS, KC_TRNS, F(_LW), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RIGHT +), + +/* NAV - mouse & navigation +//gui left and right are line home/end, or fore & back in browser +// Mouse buttons are reversed for comfort - bigger stretch is to the right button. + + * ,-----------------------------------------. .-----------------------------------------. +* | NAV | | | Up | |Gui-> | | MwU | MS_UL| MS_U |MS_UR | |Ms Norm| +* |------+------+------+------+------+------| |------+------+------+------+------+--------| +* | |Gui<- | Left | Down |Right | C^E | | BTN3 | MS_L |MS Up | MS_R | |Ms Fast | +* |------+------+------+------+------+------|------|------+------+------+------+------+--------| +* | | C^A | GUI X| GUI C| GUI_V| |Enter/| MWD | M_DL |MS Dwn|MS_DR | Up |Ms Slow | +* |------+------+------+------+------+------+ // +------+------+------+------+------+------| +* | | GuiZ | | | Low | |/ButnR|ButnL | Hi | | Left | Down | Right | +* `------------------------------------------------------------------------------------------' +*/ + +[_NAV] = KEYMAP( + F(_NAV), KC_NO, KC_NO, KC_UP, KC_NO, RGUI(KC_RIGHT), KC_WH_U, M(MUL), KC_MS_U, M(MUR), KC_NO, KC_ACL2, + KC_TRNS, RGUI(KC_LEFT), KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E), KC_BTN3, KC_MS_L, KC_MS_U, KC_MS_R, KC_NO, KC_ACL1, + KC_TRNS, LCTL(KC_A), LGUI(KC_X),RGUI(KC_C), RGUI(KC_V),KC_NO, KC_ENTER, KC_WH_D, M(MDL), KC_MS_D, M(MDR), KC_UP, KC_ACL0, + KC_TRNS, RGUI(KC_Z), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT +), + +/* FKEYS - Funtion keys & mac stuff + * ,-----------------------------------------. .-----------------------------------------. + * | FKEYS| F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | Ctrl | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | F11 | F12 | F13 | F14 | F15 | Alt | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + * |Qwerty| | | | | | /| | | | | | Del | + * |------+------+------+------+------+------+ // +------+------+------+------+------+------| + * | . |RGBTog| . | | LO | Bspc |/ | | HI | | | | | + * `------------------------------------------------------------------------------------------' + * + */ + +[_FKEYS] = KEYMAP( + F(_FKEYS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_RCTL, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_LALT , + F(_QW), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, + KC_TRNS, F(RGBLED_TOGGLE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + + +/* TRNS - skeleton for laters + * ,-----------------------------------------. .-----------------------------------------. + * | . | . | . | . | . | . | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | . | . | . | . | . | . | | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + * | . | . | . | . | . | . | /| | | | . | ; | " | + * |------+------+------+------+------+------+ // +------+------+------+------+------+------| + * | . | . | . | GUI | LO | . |/ | Spc | HI | GUI | M0 | / |LSFT | + * `------------------------------------------------------------------------------------------' + * + */ + +[_TRNS] = { + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + } + + +}; + + +const uint16_t PROGMEM fn_actions[] = { + [_QW] = ACTION_LAYER_ON(_QW,ON_RELEASE), // return to QWERTY layer + [_LW] = ACTION_LAYER_TAP_TOGGLE(_LW), // Turn on LW when holding, or tap 3 times to switch + [_HI] = ACTION_LAYER_TAP_TOGGLE(_HI), // Turn on LW when holding, or tap 3 times to switch + [_NAV] = ACTION_LAYER_TOGGLE(_NAV), + [_FKEYS] = ACTION_LAYER_TOGGLE(_FKEYS), + [_LWOUT] = ACTION_LAYER_OFF(_LW,ON_RELEASE), + [_HIOUT] = ACTION_LAYER_OFF(_HI,ON_RELEASE), + + // Functions + [RGBLED_TOGGLE] = ACTION_FUNCTION(RGBLED_TOGGLE), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + + // from algernon's ErgoDox EZ layout, + case MUL: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case MUR: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case MDL: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case MDR: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + + } + return MACRO_NONE; +}; + + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + } +} + + + +void LayerLEDSet(uint8_t layr) { + + switch (layr) { + case _QW: + rgblight_setrgb(0,20, 0); // dim green + break; + case _LW: + // deep purple + rgblight_setrgb(20,0,35); + break; + case _HI: + // light blue + rgblight_setrgb(0,20,20); + break; + case _NAV: + // Yellowy orange + rgblight_setrgb(25,20,0); // brighter + break; + case _FKEYS: + // RED + rgblight_setrgb(20,0,0); // brighter + break; + default: + rgblight_setrgb(20,2,20);//error + break; + } + + return; + +} + +void matrix_init_user(void) { +} + +// Bleah globals need to be initialized. +uint8_t old_layer=_QW; + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + if (old_layer != layer) { + LayerLEDSet(layer); + old_layer=layer; + } +} + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} + + diff --git a/keyboards/handwired/traveller/keymaps/default/readme.md b/keyboards/handwired/traveller/keymaps/default/readme.md new file mode 100644 index 000000000..7ddc40b3c --- /dev/null +++ b/keyboards/handwired/traveller/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The default keymap for handwired/traveller +this is a kitchen sink build diff --git a/keyboards/handwired/traveller/readme.md b/keyboards/handwired/traveller/readme.md new file mode 100644 index 000000000..646844b1d --- /dev/null +++ b/keyboards/handwired/traveller/readme.md @@ -0,0 +1,35 @@ +traveler keyboard firmware +====================== + +## Traveller Specific Info ## +The traveller is a varient on the atreus keyboard. +Like the Atreus, it is designed to be a good compromise between size and ergonomics. + +key differences are +- an additional column for each pinky +- an RGB LED in the center to show the current layer +- more finger stagger, splay angle and contoured keycaps (F2 profile for space key). + +You can make your own traveller keyboard by using the openscad tools from the atreus repository, and adding a hole for the LED to shine through. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent README.md](/README.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboard/traveler folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/traveller/traveller.c b/keyboards/handwired/traveller/traveller.c new file mode 100644 index 000000000..9d2534130 --- /dev/null +++ b/keyboards/handwired/traveller/traveller.c @@ -0,0 +1,61 @@ +#include "traveller.h" + +__attribute__ ((weak)) +void matrix_init_user(void) { + // leave this function blank - it can be defined in a keymap file +}; + +__attribute__ ((weak)) +void matrix_scan_user(void) { + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void process_action_user(keyrecord_t *record) { + // leave this function blank - it can be defined in a keymap file +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + // leave this function blank - it can be defined in a keymap file +} + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + +#ifdef RGBLIGHT_ENABLE + rgblight_init(); + rgblight_mode(1); // solid, no timer + rgblight_setrgb(0,20,0);// dim green, happens to be same as _QW +#endif + +// Turn status LED on + DDRC |= (1<<7); + PORTC |= (1<<7); + + matrix_init_user(); +} + + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + + diff --git a/keyboards/handwired/traveller/traveller.h b/keyboards/handwired/traveller/traveller.h new file mode 100644 index 000000000..972a1a94a --- /dev/null +++ b/keyboards/handwired/traveller/traveller.h @@ -0,0 +1,32 @@ +#ifndef TRAVELLER_H +#define TRAVELLER_H + +#include "quantum.h" +#include "led.h" + +#ifdef RGBLIGHT_ENABLE + #include "rgblight.h" +#endif +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + + + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, KC_NO, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k17, k18, k19, k1a, k1b, k1c }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c } \ +} + +#endif diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile new file mode 100644 index 000000000..6fe973e1e --- /dev/null +++ b/keyboards/hhkb/Makefile @@ -0,0 +1,90 @@ + + +# project specific files +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# as per original hasu settings +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + + + +ifndef QUANTUM_DIR + include ../../Makefile +endif + +ifneq (, $(findstring yes, $(HHKB_JP))) + OPT_DEFS += -DHHKB_JP +endif + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) +debug-off: all diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h new file mode 100644 index 000000000..3f0528b4b --- /dev/null +++ b/keyboards/hhkb/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0104 +#define MANUFACTURER q.m.k +#define PRODUCT HHKB mod +#define DESCRIPTION q.m.k keyboard firmware for HHKB + +/* key matrix size */ +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif +#define MATRIX_COLS 8 + +#define TAPPING_TERM 200 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. +*/ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/hhkb/hhkb.c b/keyboards/hhkb/hhkb.c new file mode 100644 index 000000000..a9d35123f --- /dev/null +++ b/keyboards/hhkb/hhkb.c @@ -0,0 +1 @@ +#include "hhkb.h"
\ No newline at end of file diff --git a/keyboards/hhkb/hhkb.h b/keyboards/hhkb/hhkb.h new file mode 100644 index 000000000..e95125efc --- /dev/null +++ b/keyboards/hhkb/hhkb.h @@ -0,0 +1,51 @@ +#ifndef HHKB_H +#define HHKB_H + +#include "quantum.h" + +#define KEYMAP( \ + K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ + K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ + K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ + K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ + K35, K36, K37, K57, K56) \ + \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO }, \ + { K50, K51, K52, K53, K54, K55, K56, K57 }, \ + { K60, K61, K62, K63, K64, K65, K66, KC_NO }, \ + { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ +} + + +#define KEYMAP_JP( \ + K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ + K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ + K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ + K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ + K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4) \ +{ \ + { KC_NO, KC_NO, K02, K03, K04, K05, K06, KC_NO }, \ + { KC_NO, KC_NO, K12, K13, K14, K15, K16, KC_NO }, \ + { KC_NO, KC_NO, K22, K23, K24, K25, K26, KC_NO }, \ + { KC_NO, KC_NO, K32, KC_NO, K34, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K52, K53, KC_NO, K55, K56, KC_NO }, \ + { KC_NO, KC_NO, K62, K63, K64, K65, K66, KC_NO }, \ + { KC_NO, KC_NO, K72, K73, K74, K75, K76, KC_NO }, \ + { KC_NO, KC_NO, K82, K83, K84, K85, K86, KC_NO }, \ + { KC_NO, KC_NO, K92, K93, K94, K95, K96, KC_NO }, \ + { KC_NO, KC_NO, KA2, KA3, KC_NO, KA5, KA6, KC_NO }, \ + { KC_NO, KC_NO, KB2, KB3, KB4, KB5, KB6, KC_NO }, \ + { KC_NO, KC_NO, KC2, KC_NO, KC4, KC5, KC6, KC_NO }, \ + { KC_NO, KC_NO, KD2, KD3, KD4, KD5, KD6, KC_NO }, \ + { KC_NO, KC_NO, KE2, KE3, KE4, KE5, KE6, KC_NO }, \ + { KC_NO, KC_NO, KF2, KF3, KF4, KF5, KF6, KC_NO } \ +} + + +#endif diff --git a/keyboards/hhkb/hhkb_avr.h b/keyboards/hhkb/hhkb_avr.h new file mode 100644 index 000000000..7ea6322c7 --- /dev/null +++ b/keyboards/hhkb/hhkb_avr.h @@ -0,0 +1,167 @@ +#ifndef HHKB_AVR_H +#define HHKB_AVR_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> + + +// Timer resolution check +#if (1000000/TIMER_RAW_FREQ > 20) +# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." +#endif + + +/* + * HHKB Matrix I/O + * + * row: HC4051[A,B,C] selects scan row0-7 + * row-ext: [En0,En1] row extention for JP + * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) + * key: on: 0/off: 1 + * prev: hysteresis control: assert(1) when previous key state is on + */ + + +#if defined(__AVR_ATmega32U4__) +/* + * For TMK HHKB alt controller(ATMega32U4) + * + * row: PB0-2 + * col: PB3-5,6 + * key: PD7(pull-uped) + * prev: PB7 + * power: PD4(L:off/H:on) + * row-ext: PC6,7 for HHKB JP(active low) + */ +static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } +static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } +static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } +static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } +static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } +#ifdef HHKB_POWER_SAVING +static inline void KEY_POWER_ON(void) { + DDRB = 0xFF; PORTB = 0x40; // change pins output + DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on + /* Without this wait you will miss or get false key events. */ + _delay_ms(5); // wait for powering up +} +static inline void KEY_POWER_OFF(void) { + /* input with pull-up consumes less than without it when pin is open. */ + DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up + DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off +} +static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } +#else +static inline void KEY_POWER_ON(void) {} +static inline void KEY_POWER_OFF(void) {} +static inline bool KEY_POWER_STATE(void) { return true; } +#endif +static inline void KEY_INIT(void) +{ + /* row,col,prev: output */ + DDRB = 0xFF; + PORTB = 0x40; // unable + /* key: input with pull-up */ + DDRD &= ~0x80; + PORTD |= 0x80; +#ifdef HHKB_JP + /* row extention for HHKB JP */ + DDRC |= (1<<6|1<<7); + PORTC |= (1<<6|1<<7); +#endif + KEY_UNABLE(); + KEY_PREV_OFF(); + + KEY_POWER_OFF(); +} +static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) +{ + PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); +#ifdef HHKB_JP + if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6); + else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7); +#endif +} + + +#elif defined(__AVR_AT90USB1286__) +/* + * For Teensy++(AT90USB1286) + * + * HHKB pro HHKB pro2 + * row: PB0-2 (6-8) (5-7) + * col: PB3-5,6 (9-12) (8-11) + * key: PE6(pull-uped) (4) (3) + * prev: PE7 (5) (4) + * + * TODO: convert into 'staitc inline' function + */ +#define KEY_INIT() do { \ + DDRB |= 0x7F; \ + DDRE |= (1<<7); \ + DDRE &= ~(1<<6); \ + PORTE |= (1<<6); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PINE & (1<<6)) +#define KEY_PREV_ON() (PORTE |= (1<<7)) +#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() +#define KEY_POWER_STATE() true + + +#else +# error "define code for matrix scan" +#endif + + +#if 0 +// For ATMega328P with V-USB +// +// #elif defined(__AVR_ATmega328P__) +// Ports for V-USB +// key: PB0(pull-uped) +// prev: PB1 +// row: PB2-4 +// col: PC0-2,3 +// power: PB5(Low:on/Hi-z:off) +#define KEY_INIT() do { \ + DDRB |= 0x3E; \ + DDRB &= ~(1<<0); \ + PORTB |= 1<<0; \ + DDRC |= 0x0F; \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) do { \ + PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ + PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ +} while (0) +#define KEY_ENABLE() (PORTC &= ~(1<<3)) +#define KEY_UNABLE() (PORTC |= (1<<3)) +#define KEY_STATE() (PINB & (1<<0)) +#define KEY_PREV_ON() (PORTB |= (1<<1)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) +// Power supply switching +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTB &= ~(1<<5); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + DDRB &= ~0x3F; \ + PORTB &= ~0x3F; \ + DDRC &= ~0x0F; \ + PORTC &= ~0x0F; \ +} while (0) +#endif + +#endif diff --git a/keyboards/hhkb/keymaps/default/keymap.c b/keyboards/hhkb/keymaps/default/keymap.c new file mode 100644 index 000000000..bd5dd8372 --- /dev/null +++ b/keyboards/hhkb/keymaps/default/keymap.c @@ -0,0 +1,78 @@ +/* -*- eval: (turn-on-orgtbl); -*- + * default HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define HHKB 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* BASE Level: Default Layer + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + + |------+------+-----------------------+------+------| + | LAlt | LGUI | ******* Space ******* | RGUI | RAlt | + |------+------+-----------------------+------+------| + */ + + [BASE] = KEYMAP( // default layer + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_LALT, KC_LGUI, /* */ KC_SPC, KC_RGUI, KC_RALT), + + + + /* Layer HHKB: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + + */ + + [HHKB] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile new file mode 100644 index 000000000..92986292a --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/jp/keymap.c b/keyboards/hhkb/keymaps/jp/keymap.c new file mode 100644 index 000000000..8525adce5 --- /dev/null +++ b/keyboards/hhkb/keymaps/jp/keymap.c @@ -0,0 +1,58 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + + +/* Layer 0: HHKB JP + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +/* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + * |------------------------------------------------------` | + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | | + * |-----------------------------------------------------------| + * | || | | | | | | | | || | | | + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/hhkb/keymaps/lxol/keymap.c b/keyboards/hhkb/keymaps/lxol/keymap.c new file mode 100644 index 000000000..ccf1e0704 --- /dev/null +++ b/keyboards/hhkb/keymaps/lxol/keymap.c @@ -0,0 +1,208 @@ +/* -*- eval: (turn-on-orgtbl); -*- + * lxol HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define WIN 1 +#define HHKB 2 +#define RGUILEV 3 +#define LGUILEV 4 +#define RALTLEV 5 +#define LALTLEV 6 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0: Default Layer + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | L | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [BASE] = KEYMAP( // layer 0 : default + + + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, LT(LALTLEV,KC_A), LT(LGUILEV,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT(RGUILEV,KC_L), LT(RALTLEV,KC_SCLN), KC_QUOT, KC_FN0, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT), + + + + /* Layer 1: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |---+---+---+---+---| + | | | | | | + |---+---+---+---+---| + */ + + [HHKB] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + + /* Layer LGUI: All keys with RGUI modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [RGUILEV] = KEYMAP( // Right GUI layer by KC_L + + RGUI(KC_ESC), RGUI(KC_1), RGUI(KC_2), RGUI(KC_3), RGUI(KC_4), RGUI(KC_5), RGUI(KC_6), RGUI(KC_7), RGUI(KC_8), RGUI(KC_9), RGUI(KC_0), RGUI(KC_MINS), RGUI(KC_EQL), RGUI(KC_BSLS), RGUI(KC_GRV), \ + RGUI(KC_TAB), RGUI(KC_Q), RGUI(KC_W), RGUI(KC_E), RGUI(KC_R), RGUI(KC_T), RGUI(KC_Y), RGUI(KC_U), RGUI(KC_I), RGUI(KC_O), RGUI(KC_P), RGUI(KC_LBRC), RGUI(KC_RBRC), RGUI(KC_BSPC), \ + RGUI(KC_LCTL), RGUI(KC_A), RGUI(KC_S), RGUI(KC_D), RGUI(KC_F), RGUI(KC_G), RGUI(KC_H), RGUI(KC_J), RGUI(KC_K), KC_TRNS, KC_TRNS, RGUI(KC_QUOT), KC_FN0, \ + RGUI(KC_LSFT), RGUI(KC_Z), RGUI(KC_X), RGUI(KC_C), RGUI(KC_V), RGUI(KC_B), RGUI(KC_N), RGUI(KC_M), RGUI(KC_COMM), RGUI(KC_DOT), RGUI(KC_SLSH), RGUI(KC_RSFT), KC_TRNS, \ + KC_LALT, KC_LGUI, RGUI(KC_SPC), KC_RGUI, KC_RALT), + + /* Layer LGUI: All keys with LGUI modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | LGUI | RAlt | + |------+------+-------+------+------| + */ + + [LGUILEV] = KEYMAP( // Right GUI layer by KC_L + + LGUI(KC_ESC), LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), LGUI(KC_MINS), LGUI(KC_EQL), LGUI(KC_BSLS), LGUI(KC_GRV), \ + LGUI(KC_TAB), LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), LGUI(KC_BSPC), \ + LGUI(KC_LCTL), KC_TRNS, KC_TRNS, LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), LGUI(KC_SCLN), LGUI(KC_QUOT), KC_FN0, \ + KC_LSFT, LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), KC_RSFT, KC_TRNS, \ + KC_LALT, KC_LGUI, LGUI(KC_SPC), KC_LGUI, KC_RALT), + + /* Layer LALT: All keys with RALT modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | RGUI | RAlt | + |------+------+-------+------+------| + */ + + [RALTLEV] = KEYMAP( // Right ALT layer by KC_L + + RALT(KC_ESC), RALT(KC_1), RALT(KC_2), RALT(KC_3), RALT(KC_4), RALT(KC_5), RALT(KC_6), RALT(KC_7), RALT(KC_8), RALT(KC_9), RALT(KC_0), RALT(KC_MINS), RALT(KC_EQL), RALT(KC_BSLS), RALT(KC_GRV), \ + RALT(KC_TAB), RALT(KC_Q), RALT(KC_W), RALT(KC_E), RALT(KC_R), RALT(KC_T), RALT(KC_Y), RALT(KC_U), RALT(KC_I), RALT(KC_O), RALT(KC_P), RALT(KC_LBRC), RALT(KC_RBRC), RALT(KC_BSPC), \ + RALT(KC_LCTL), RALT(KC_A), RALT(KC_S), RALT(KC_D), RALT(KC_F), RALT(KC_G), RALT(KC_H), RALT(KC_J), RALT(KC_K), KC_TRNS, KC_TRNS, RALT(KC_QUOT), KC_FN0, \ + RALT(KC_LSFT), RALT(KC_Z), RALT(KC_X), RALT(KC_C), RALT(KC_V), RALT(KC_B), RALT(KC_N), RALT(KC_M), RALT(KC_COMM), RALT(KC_DOT), RALT(KC_SLSH), RALT(KC_RSFT), KC_TRNS, \ + KC_LALT, KC_LGUI, RALT(KC_SPC), KC_RGUI, KC_RALT), + + /* Layer LALT: All keys with LALT modifier + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | Fn2 | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+-----+-------+----------+-------+---| + + |------+------+-------+------+------| + | LAlt | LGUI | Space | LGUI | RAlt | + |------+------+-------+------+------| + */ + + [LALTLEV] = KEYMAP( // Right ALT layer by KC_L + + LALT(KC_ESC), LALT(KC_1), LALT(KC_2), LALT(KC_3), LALT(KC_4), LALT(KC_5), LALT(KC_6), LALT(KC_7), LALT(KC_8), LALT(KC_9), LALT(KC_0), LALT(KC_MINS), LALT(KC_EQL), LALT(KC_BSLS), LALT(KC_GRV), \ + LALT(KC_TAB), LALT(KC_Q), LALT(KC_W), LALT(KC_E), LALT(KC_R), LALT(KC_T), LALT(KC_Y), LALT(KC_U), LALT(KC_I), LALT(KC_O), LALT(KC_P), LALT(KC_LBRC), LALT(KC_RBRC), LALT(KC_BSPC), \ + LALT(KC_LCTL), KC_TRNS, KC_TRNS, LALT(KC_D), LALT(KC_F), LALT(KC_G), LALT(KC_H), LALT(KC_J), LALT(KC_K), LALT(KC_L), LALT(KC_SCLN), LALT(KC_QUOT), KC_FN0, \ + KC_LSFT, LALT(KC_Z), LALT(KC_X), LALT(KC_C), LALT(KC_V), LALT(KC_B), LALT(KC_N), LALT(KC_M), LALT(KC_COMM), LALT(KC_DOT), LALT(KC_SLSH), KC_RSFT, KC_TRNS, \ + KC_LALT, KC_LGUI, LALT(KC_SPC), KC_LGUI, KC_RALT), + + + /* Layer WIN: Win layer + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Contro | A | S | D | F | G | H | J | K | L | ; | ' | RCtl/Ent | | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |--------+---+---+---+---+---+---+---+---+---+---+-------+----------+-------+---| + + |------+------+-------+------+------| + | LGui | LAlt | Space | RGui | Ralt | + |------+------+-------+------+------| + */ + + [WIN] = KEYMAP( // BASE level with swapped GUI/ALT + + + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, LT(LGUILEV,KC_A), LT(LALTLEV,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT(RALTLEV,KC_L), LT(RGUILEV,KC_SCLN), KC_QUOT, KC_FN0, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), \ + KC_RGUI, KC_RALT, KC_SPC, KC_RALT, KC_RGUI)}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT) // RControl with tap Enter* +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile new file mode 100644 index 000000000..92986292a --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile @@ -0,0 +1 @@ +HHKB_JP=yes diff --git a/keyboards/hhkb/keymaps/rdg_jp/keymap.c b/keyboards/hhkb/keymaps/rdg_jp/keymap.c new file mode 100644 index 000000000..700ba3a0b --- /dev/null +++ b/keyboards/hhkb/keymaps/rdg_jp/keymap.c @@ -0,0 +1,65 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + ZER, + HDN, + OSY +}; + + +#define CTL_ESC CTL_T(KC_ESC) +#define SFT_BSP SFT_T(KC_BSPC) + +#define SCRNS3 LGUI(LCTL(LSFT(KC_3))) +#define SCRNS4 LGUI(LCTL(LSFT(KC_4))) + + +/* hhkb jp ~ layout + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [ZER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, + MO(HDN), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC, SFT_BSP, MO(HDN), MO(OSY), KC_NO, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [HDN] = KEYMAP_JP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, + _______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, KC_ENT, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [OSY] = KEYMAP_JP( + _______, _______, _______, SCRNS3, SCRNS4, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/hhkb/matrix.c b/keyboards/hhkb/matrix.c new file mode 100644 index 000000000..666b6f595 --- /dev/null +++ b/keyboards/hhkb/matrix.c @@ -0,0 +1,215 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "timer.h" +#include "matrix.h" +#include "hhkb_avr.h" +#include <avr/wdt.h> +#include "suspend.h" +#include "lufa.h" + + +// matrix power saving +#define MATRIX_POWER_SAVE 10000 +static uint32_t matrix_last_modified = 0; + +// matrix state buffer(1:on, 0:off) +static matrix_row_t *matrix; +static matrix_row_t *matrix_prev; +static matrix_row_t _matrix0[MATRIX_ROWS]; +static matrix_row_t _matrix1[MATRIX_ROWS]; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ +#ifdef DEBUG + debug_enable = true; + debug_keyboard = true; +#endif + + KEY_INIT(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; + matrix = _matrix0; + matrix_prev = _matrix1; +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +uint8_t matrix_scan(void) +{ + uint8_t *tmp; + + tmp = matrix_prev; + matrix_prev = matrix; + matrix = tmp; + + // power on + if (!KEY_POWER_STATE()) KEY_POWER_ON(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + KEY_SELECT(row, col); + _delay_us(5); + + // Not sure this is needed. This just emulates HHKB controller's behaviour. + if (matrix_prev[row] & (1<<col)) { + KEY_PREV_ON(); + } + _delay_us(10); + + // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE. + // If V-USB interrupts in this section we could lose 40us or so + // and would read invalid value from KEY_STATE. + uint8_t last = TIMER_RAW; + + KEY_ENABLE(); + + // Wait for KEY_STATE outputs its value. + // 1us was ok on one HHKB, but not worked on another. + // no wait doesn't work on Teensy++ with pro(1us works) + // no wait does work on tmk PCB(8MHz) with pro2 + // 1us wait does work on both of above + // 1us wait doesn't work on tmk(16MHz) + // 5us wait does work on tmk(16MHz) + // 5us wait does work on tmk(16MHz/2) + // 5us wait does work on tmk(8MHz) + // 10us wait does work on Teensy++ with pro + // 10us wait does work on 328p+iwrap with pro + // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan) + _delay_us(5); + + if (KEY_STATE()) { + matrix[row] &= ~(1<<col); + } else { + matrix[row] |= (1<<col); + } + + // Ignore if this code region execution time elapses more than 20us. + // MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us] + // MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b) + if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) { + matrix[row] = matrix_prev[row]; + } + + _delay_us(5); + KEY_PREV_OFF(); + KEY_UNABLE(); + + // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. + // This takes 25us or more to make sure KEY_STATE returns to idle state. +#ifdef HHKB_JP + // Looks like JP needs faster scan due to its twice larger matrix + // or it can drop keys in fast key typing + _delay_us(30); +#else + _delay_us(75); +#endif + } + if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32(); + } + // power off + if (KEY_POWER_STATE() && + (USB_DeviceState == DEVICE_STATE_Suspended || + USB_DeviceState == DEVICE_STATE_Unattached ) && + timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) { + KEY_POWER_OFF(); + suspend_power_down(); + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix[i] != matrix_prev[i]) + return true; + } + return false; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (int8_t r = MATRIX_ROWS - 1; r >= 0; --r) { + count += bitpop16(matrix_get_row(r)); + } + return count; +} + +void matrix_power_up(void) { + KEY_POWER_ON(); +} +void matrix_power_down(void) { + KEY_POWER_OFF(); +} diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md new file mode 100644 index 000000000..39d49b32a --- /dev/null +++ b/keyboards/hhkb/readme.md @@ -0,0 +1,180 @@ +hhkb_qmk keyboard firmware +====================== + +## Quantum MK Firmware + +You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. + + BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + MIDI_ENABLE = yes # MIDI controls + # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // + BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + +## Quick aliases to common actions + +Your keymap can include shortcuts to common operations (called "function actions" in tmk). + +### Switching and toggling layers + +`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. + +`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). + +`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. + +### Fun with modifier keys + +* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias +* `RSFT(kc)` - applies right Shift to *kc* +* `LCTL(kc)` - applies left Control to *kc* +* `RCTL(kc)` - applies right Control to *kc* +* `LALT(kc)` - applies left Alt to *kc* +* `RALT(kc)` - applies right Alt to *kc* +* `LGUI(kc)` - applies left GUI (command/win) to *kc* +* `RGUI(kc)` - applies right GUI (command/win) to *kc* + +You can also chain these, like this: + + LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. + +The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. + + KC_TILD ~ + KC_EXLM ! + KC_AT @ + KC_HASH # + KC_DLR $ + KC_PERC % + KC_CIRC ^ + KC_AMPR & + KC_ASTR * + KC_LPRN ( + KC_RPRN ) + KC_UNDS _ + KC_PLUS + + KC_LCBR { + KC_RCBR } + KC_PIPE | + KC_COLN : + +`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. + +These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): + + * MOD_LCTL + * MOD_LSFT + * MOD_LALT + * MOD_LGUI + +These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. + +We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: + + * `CTL_T(kc)` - is LCTL when held and *kc* when tapped + * `SFT_T(kc)` - is LSFT when held and *kc* when tapped + * `ALT_T(kc)` - is LALT when held and *kc* when tapped + * `GUI_T(kc)` - is LGUI when held and *kc* when tapped + * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) + +### Temporarily setting the default layer + +`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. + +### Remember: These are just aliases + +These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). + +Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. + +## Macro shortcuts: Send a whole string when pressing just one key + +Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). + +```c +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. +{ + switch(id) { + case 0: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes + } + break; + } + return MACRO_NONE; +}; +``` +A macro can include the following commands: + +* I() change interval of stroke in milliseconds. +* D() press key. +* U() release key. +* T() type key(press and release). +* W() wait (milliseconds). +* END end mark. + +So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. + +Note: Using macros to have your keyboard send passwords for you is a bad idea. + +### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) + +Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: + + #include "keymap_<layout>.h" + +Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: + + * `CM_*` for all of the Colemak-equivalent characters + * `DV_*` for all of the Dvorak-equivalent characters + +These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. + +To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. + +## Additional language support + +In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). + +## Unicode support + +You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. + +## Other firmware shortcut keycodes + +* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) +* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things +* `BL_ON` - turns the backlight on +* `BL_OFF` - turns the backlight off +* `BL_<n>` - sets the backlight to level *n* +* `BL_INC` - increments the backlight level by one +* `BL_DEC` - decrements the backlight level by one +* `BL_TOGG` - toggles the backlight +* `BL_STEP` - steps through the backlight levels + +Enable the backlight from the Makefile. + +## MIDI functionalty + +This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. + +## Bluetooth functionality + +This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/infinity_chibios/MEMO.txt b/keyboards/infinity_chibios/MEMO.txt new file mode 100644 index 000000000..e2886aa00 --- /dev/null +++ b/keyboards/infinity_chibios/MEMO.txt @@ -0,0 +1,385 @@ +flabbergast's TMK/ChibiOS port +============================== +2015/10/16 + + +Build +----- +$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git + +$ cd tmk_keyboard +$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios +or +$ cd tmk_keyboard/tmk_core/tool/chibios +$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios + +$ cd tmk_keyboard/keyboard/infinity_chibios +$ make + + + + +Chibios Configuration +--------------------- +halconf.h: for HAL configuration + placed in project directory + read in chibios/os/hal/hal.mk + included in chibios/os/hal/include/hal.h +mcuconf.h: for MCU configuration + placed in project directory + included in halconf.h + + +Chibios Term +------------ +PAL = Port Abstraction Layer + palWritePad + palReadPad + palSetPad + chibios/os/hal/include/pal.h + +LLD = Low Level Driver + + +Makefile +-------- + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = KL2x + + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <this_dir>/ld/ + MCU_LDSCRIPT = MKL26Z64 + + # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP = kl2x + + # Board: it should exist either in <chibios>/os/hal/boards/ + # or <this_dir>/boards + BOARD = PJRC_TEENSY_LC + + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + +halconf.h +--------- + + +mcuconf.h +--------- + + +chconf.h +-------- + + +ld script +--------- +--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900 ++++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900 +@@ -27,7 +27,8 @@ + { + flash0 : org = 0x00000000, len = 0xc0 + flashcfg : org = 0x00000400, len = 0x10 +- flash : org = 0x00000410, len = 64k - 0x410 ++ flash : org = 0x00000410, len = 62k - 0x410 ++ eeprom_emu : org = 0x0000F800, len = 2k + ram : org = 0x1FFFF800, len = 8k + } + +@@ -35,6 +36,10 @@ + __ram_size__ = LENGTH(ram); + __ram_end__ = __ram_start__ + __ram_size__; + ++__eeprom_workarea_start__ = ORIGIN(eeprom_emu); ++__eeprom_workarea_size__ = LENGTH(eeprom_emu); ++__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; ++ + SECTIONS + { + . = 0; + + + +Configuration/Startup for Infinity 60% +-------------------------------------- +Configuration: + + +Clock: +Inifinity + FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz + Clock dividor: + SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock + SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock + SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock + Internal reference clock: + MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL + MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable + FLL multipilication: + MCG_C4[DMX32] = 1 + MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz + +chibios/os/hal/ports/KINETIS/K20x/hal_lld.c + k20x_clock_init(): called in __early_init() defined in board.c + disable watchdog and configure clock + + configurable macros: + KINETIS_NO_INIT: whether init or not + KINETIS_MCG_MODE: clock mode + KINETIS_MCG_MODE_FEI + KINETIS_MCG_MODE_PEE + hal/ports/KINETIS/K20x/hal_lld.h + + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h + PALConfig pal_default_config + boardInit() + __early_init() + macro definitions for board infos, freq and mcu type + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c + +USB + + +Startup +------- + common/ports/ARMCMx/GCC/crt0_v[67]m.s + Reset_Handler: startup code + common/ports/ARMCMx/GCC/crt1.c + __core_init(): weak + __early_init(): weak + __late_init(): weak + __default_exit(): weak + called from Reset_Handler of crt0 + common/ports/ARMCMx/GCC/vector.c + common/ports/ARMCMx/GCC/ld/*.ld + +chibios/os/common/ports/ARMCMx/compilers/GCC/ +├── crt0_v6m.s +├── crt0_v7m.s +├── crt1.c +├── ld +│ ├── MK20DX128BLDR3.ld +│ ├── MK20DX128BLDR4.ld +│ ├── MK20DX128.ld +│ ├── MK20DX256.ld +│ ├── MKL25Z128.ld +│ ├── MKL26Z128.ld +│ ├── MKL26Z64.ld +│ └── STM32L476xG.ld +├── mk +│ ├── startup_k20x5.mk +│ ├── startup_k20x7.mk +│ ├── startup_k20x.mk +│ ├── startup_kl2x.mk +│ └── startup_stm32l4xx.mk +├── rules.ld +├── rules.mk +└── vectors.c + +chibios/os/hal/ +├── boards +│ ├── FREESCALE_FREEDOM_K20D50M +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── MCHCK_K20 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_3 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_3_1 +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── PJRC_TEENSY_LC +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── readme.txt +│ ├── simulator +│ │ ├── board.c +│ │ ├── board.h +│ │ └── board.mk +│ ├── ST_NUCLEO_F030R8 +│ │ ├── board.c +│ │ ├── board.h +│ │ ├── board.mk +│ │ └── cfg +│ │ └── board.chcfg +├── hal.mk +├── include +│ ├── adc.h +│ ├── can.h +│ ├── dac.h +│ ├── ext.h +│ ├── gpt.h +│ ├── hal_channels.h +│ ├── hal_files.h +│ ├── hal.h +│ ├── hal_ioblock.h +│ ├── hal_mmcsd.h +│ ├── hal_queues.h +│ ├── hal_streams.h +│ ├── i2c.h +│ ├── i2s.h +│ ├── icu.h +│ ├── mac.h +│ ├── mii.h +│ ├── mmc_spi.h +│ ├── pal.h +│ ├── pwm.h +│ ├── rtc.h +│ ├── sdc.h +│ ├── serial.h +│ ├── serial_usb.h +│ ├── spi.h +│ ├── st.h +│ ├── uart.h +│ └── usb.h +├── lib +│ └── streams +│ ├── chprintf.c +│ ├── chprintf.h +│ ├── memstreams.c +│ ├── memstreams.h +│ ├── nullstreams.c +│ └── nullstreams.h +├── osal +│ ├── nil +│ │ ├── osal.c +│ │ ├── osal.h +│ │ └── osal.mk +│ ├── os-less +│ │ └── ARMCMx +│ │ ├── osal.c +│ │ ├── osal.h +│ │ └── osal.mk +│ └── rt +│ ├── osal.c +│ ├── osal.h +│ └── osal.mk +├── ports +│ ├── AVR +│ ├── common +│ │ └── ARMCMx +│ │ ├── mpu.h +│ │ ├── nvic.c +│ │ └── nvic.h +│ ├── KINETIS +│ │ ├── K20x +│ │ │ ├── hal_lld.c +│ │ │ ├── hal_lld.h +│ │ │ ├── kinetis_registry.h +│ │ │ ├── platform.dox +│ │ │ ├── platform.mk +│ │ │ ├── pwm_lld.c +│ │ │ ├── pwm_lld.h +│ │ │ ├── spi_lld.c +│ │ │ └── spi_lld.h +│ │ ├── KL2x +│ │ │ ├── hal_lld.c +│ │ │ ├── hal_lld.h +│ │ │ ├── kinetis_registry.h +│ │ │ ├── platform.mk +│ │ │ ├── pwm_lld.c +│ │ │ └── pwm_lld.h +│ │ ├── LLD +│ │ │ ├── adc_lld.c +│ │ │ ├── adc_lld.h +│ │ │ ├── ext_lld.c +│ │ │ ├── ext_lld.h +│ │ │ ├── gpt_lld.c +│ │ │ ├── gpt_lld.h +│ │ │ ├── i2c_lld.c +│ │ │ ├── i2c_lld.h +│ │ │ ├── pal_lld.c +│ │ │ ├── pal_lld.h +│ │ │ ├── serial_lld.c +│ │ │ ├── serial_lld.h +│ │ │ ├── st_lld.c +│ │ │ ├── st_lld.h +│ │ │ ├── usb_lld.c +│ │ │ └── usb_lld.h +│ │ └── README.md +│ ├── LPC +│ ├── simulator +│ └── STM32 +├── src +│ ├── adc.c +│ ├── can.c +│ ├── dac.c +│ ├── ext.c +│ ├── gpt.c +│ ├── hal.c +│ ├── hal_mmcsd.c +│ ├── hal_queues.c +│ ├── i2c.c +│ ├── i2s.c +│ ├── icu.c +│ ├── mac.c +│ ├── mmc_spi.c +│ ├── pal.c +│ ├── pwm.c +│ ├── rtc.c +│ ├── sdc.c +│ ├── serial.c +│ ├── serial_usb.c +│ ├── spi.c +│ ├── st.c +│ ├── uart.c +│ └── usb.c +└── templates + ├── adc_lld.c + ├── adc_lld.h + ├── can_lld.c + ├── can_lld.h + ├── dac_lld.c + ├── dac_lld.h + ├── ext_lld.c + ├── ext_lld.h + ├── gpt_lld.c + ├── gpt_lld.h + ├── halconf.h + ├── hal_lld.c + ├── hal_lld.h + ├── i2c_lld.c + ├── i2c_lld.h + ├── i2s_lld.c + ├── i2s_lld.h + ├── icu_lld.c + ├── icu_lld.h + ├── mac_lld.c + ├── mac_lld.h + ├── mcuconf.h + ├── osal + │ ├── osal.c + │ ├── osal.h + │ └── osal.mk + ├── pal_lld.c + ├── pal_lld.h + ├── platform.mk + ├── pwm_lld.c + ├── pwm_lld.h + ├── rtc_lld.c + ├── rtc_lld.h + ├── sdc_lld.c + ├── sdc_lld.h + ├── serial_lld.c + ├── serial_lld.h + ├── spi_lld.c + ├── spi_lld.h + ├── st_lld.c + ├── st_lld.h + ├── uart_lld.c + ├── uart_lld.h + ├── usb_lld.c + └── usb_lld.h diff --git a/keyboards/infinity_chibios/Makefile b/keyboards/infinity_chibios/Makefile new file mode 100644 index 000000000..649b43e64 --- /dev/null +++ b/keyboards/infinity_chibios/Makefile @@ -0,0 +1,70 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX128BLDR4 + +# Startup code to use +# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity KB +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x5 + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +BOARD = MCHCK_K20 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/infinity_chibios/bootloader_defs.h b/keyboards/infinity_chibios/bootloader_defs.h new file mode 100644 index 000000000..c67153be6 --- /dev/null +++ b/keyboards/infinity_chibios/bootloader_defs.h @@ -0,0 +1 @@ +#define KIIBOHD_BOOTLOADER diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity_chibios/chconf.h new file mode 100644 index 000000000..b886c383b --- /dev/null +++ b/keyboards/infinity_chibios/chconf.h @@ -0,0 +1,524 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/config.h b/keyboards/infinity_chibios/config.h new file mode 100644 index 000000000..cb9022205 --- /dev/null +++ b/keyboards/infinity_chibios/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER "TMK" +#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' +#define PRODUCT "Infinity keyboard/TMK" +#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' + +/* key matrix size */ +#define MATRIX_ROWS 9 +#define MATRIX_COLS 7 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Keymap for Infiity prototype */ +#define INFINITY_PROTOTYPE + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity_chibios/halconf.h new file mode 100644 index 000000000..53538de14 --- /dev/null +++ b/keyboards/infinity_chibios/halconf.h @@ -0,0 +1,353 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/infinity_chibios.c b/keyboards/infinity_chibios/infinity_chibios.c new file mode 100644 index 000000000..845eda01b --- /dev/null +++ b/keyboards/infinity_chibios/infinity_chibios.c @@ -0,0 +1,17 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "infinity_chibios.h" diff --git a/keyboards/infinity_chibios/infinity_chibios.h b/keyboards/infinity_chibios/infinity_chibios.h new file mode 100644 index 000000000..a44c68b82 --- /dev/null +++ b/keyboards/infinity_chibios/infinity_chibios.h @@ -0,0 +1,66 @@ +/* +Copyright 2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include "quantum.h" + +#ifdef INFINITY_PROTOTYPE + +/* Infinity prototype */ +#define KEYMAP( \ + K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \ + K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \ + K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \ + K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \ + K06, K16, K26, K36, K46, K56, K66, K76 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \ + { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \ +} + +#else + +/* Infinity production */ +#define KEYMAP( \ + K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \ + K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \ + K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \ + K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \ + K16, K26, K36, K46, K56, K66, K76, K86 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \ + { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \ +} + +#endif + +#endif diff --git a/keyboards/infinity_chibios/keymaps/default/keymap.c b/keyboards/infinity_chibios/keymaps/default/keymap.c new file mode 100644 index 000000000..2acf72849 --- /dev/null +++ b/keyboards/infinity_chibios/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +#include "infinity_chibios.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| + * |-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [0] = + KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS, GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, \ + NO, LGUI,LALT, SPC, RALT,RGUI,NO, NO), + + /* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| + * |-----------------------------------------------------------| + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | + * `-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [1] = + KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \ + TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS), +}; + +const uint16_t fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; + diff --git a/keyboards/infinity_chibios/keymaps/hasu/keymap.c b/keyboards/infinity_chibios/keymaps/hasu/keymap.c new file mode 100644 index 000000000..e9a212f0e --- /dev/null +++ b/keyboards/infinity_chibios/keymaps/hasu/keymap.c @@ -0,0 +1,199 @@ +#include "infinity_chibios.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| + * |-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [0] = + KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ + LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ + FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ + NO, LGUI,LALT, FN4, FN5, RGUI,NO, NO), + + /* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| + * |-----------------------------------------------------------| + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | + * `-----------------------------------------------------------' + * | |Gui|Alt | Space |Alt |Gui| | | + * `-----------------------------------------------------------' + */ + [1] = + KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS,BSPC, \ + LCTL,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ + LSFT,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ + TRNS,LGUI,LALT, TRNS, RALT,RGUI,TRNS,TRNS), + + /* Layer 2: Vi mode[Slash] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| + * |-----------------------------------------------------------| + * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | + * `-----------------------------------------------------------' + * |Gui|Alt | Space |Alt |Gui| + * `-------------------------------------------' + */ + [2] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ + LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \ + TRNS,LGUI,LALT, SPC, RALT,RGUI,TRNS,TRNS), + + /* Layer 3: Mouse mode(IJKL)[Semicolon] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + [3] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,FN9, FN10,FN8, \ + LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ + TRNS,LGUI,LALT, BTN1, TRNS,TRNS,TRNS,TRNS), + + /* Layer 4: Mouse mode(IJKL)[Space] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + [4] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,BTN4,BTN5,FN8, \ + LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \ + TRNS,LGUI,LALT, TRNS, TRNS,TRNS,TRNS,TRNS), + +}; + +/* id for user defined functions */ +enum function_id { + LSHIFT_LPAREN, +}; + +enum macro_id { + HELLO, + VOLUP, + ALT_TAB, +}; + +/* + * Fn action definition + */ +const uint16_t fn_actions[] = { + [0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) + [1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps) + [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* + [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* + [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space + [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL) + [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter + [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift + [8] = ACTION_MACRO(ALT_TAB), // Application switching + [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT), + [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT), +}; + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case HELLO: + return (record->event.pressed ? + MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) : + MACRO_NONE ); + case VOLUP: + return (record->event.pressed ? + MACRO( D(VOLU), U(VOLU), END ) : + MACRO_NONE ); + case ALT_TAB: + return (record->event.pressed ? + MACRO( D(LALT), D(TAB), END ) : + MACRO( U(TAB), END )); + } + return MACRO_NONE; +} + + + +/* + * user defined action function + */ +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (record->event.pressed) dprint("P"); else dprint("R"); + dprintf("%d", record->tap.count); + if (record->tap.interrupted) dprint("i"); + dprint("\n"); + + switch (id) { + case LSHIFT_LPAREN: + // Shift parentheses example: LShft + tap '(' + // http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses + // http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899 + if (record->event.pressed) { + if (record->tap.count > 0 && !record->tap.interrupted) { + if (record->tap.interrupted) { + dprint("tap interrupted\n"); + register_mods(MOD_BIT(KC_LSHIFT)); + } + } else { + register_mods(MOD_BIT(KC_LSHIFT)); + } + } else { + if (record->tap.count > 0 && !(record->tap.interrupted)) { + add_weak_mods(MOD_BIT(KC_LSHIFT)); + send_keyboard_report(); + register_code(KC_9); + unregister_code(KC_9); + del_weak_mods(MOD_BIT(KC_LSHIFT)); + send_keyboard_report(); + record->tap.count = 0; // ad hoc: cancel tap + } else { + unregister_mods(MOD_BIT(KC_LSHIFT)); + } + } + break; + } +} diff --git a/keyboards/infinity_chibios/led.c b/keyboards/infinity_chibios/led.c new file mode 100644 index 000000000..aed66c7c0 --- /dev/null +++ b/keyboards/infinity_chibios/led.c @@ -0,0 +1,24 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) { +} diff --git a/keyboards/infinity_chibios/matrix.c b/keyboards/infinity_chibios/matrix.c new file mode 100644 index 000000000..2c68ea83a --- /dev/null +++ b/keyboards/infinity_chibios/matrix.c @@ -0,0 +1,128 @@ +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "print.h" +#include "matrix.h" + + +/* + * Infinity Pinusage: + * Column pins are input with internal pull-down. Row pins are output and strobe with high. + * Key is high or 1 when it turns on. + * + * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 } + * row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + + +void matrix_init(void) +{ + /* Column(sense) */ + palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 2, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 3, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); + + /* Row(strobe) */ + palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); + + memset(matrix, 0, MATRIX_ROWS); + memset(matrix_debouncing, 0, MATRIX_ROWS); +} + +uint8_t matrix_scan(void) +{ + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t data = 0; + + // strobe row + switch (row) { + case 0: palSetPad(GPIOB, 0); break; + case 1: palSetPad(GPIOB, 1); break; + case 2: palSetPad(GPIOB, 2); break; + case 3: palSetPad(GPIOB, 3); break; + case 4: palSetPad(GPIOB, 16); break; + case 5: palSetPad(GPIOB, 17); break; + case 6: palSetPad(GPIOC, 4); break; + case 7: palSetPad(GPIOC, 5); break; + case 8: palSetPad(GPIOD, 0); break; + } + + wait_us(1); // need wait to settle pin state + + // read col data + data = (palReadPort(GPIOD)>>1); + + // un-strobe row + switch (row) { + case 0: palClearPad(GPIOB, 0); break; + case 1: palClearPad(GPIOB, 1); break; + case 2: palClearPad(GPIOB, 2); break; + case 3: palClearPad(GPIOB, 3); break; + case 4: palClearPad(GPIOB, 16); break; + case 5: palClearPad(GPIOB, 17); break; + case 6: palClearPad(GPIOC, 4); break; + case 7: palClearPad(GPIOC, 5); break; + case 8: palClearPad(GPIOD, 0); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = matrix_debouncing[row]; + } + debouncing = false; + } + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + xprintf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + xprintf("%02X: "); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1<<col)) + xprintf("1"); + else + xprintf("0"); + } + xprintf("\n"); + } +} diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity_chibios/mcuconf.h new file mode 100644 index 000000000..66b6ce25d --- /dev/null +++ b/keyboards/infinity_chibios/mcuconf.h @@ -0,0 +1,55 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1
+#define KINETIS_CLKDIV1_OUTDIV2 1
+#define KINETIS_CLKDIV1_OUTDIV4 2
+#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile new file mode 100644 index 000000000..75d544f16 --- /dev/null +++ b/keyboards/jd45/Makefile @@ -0,0 +1,71 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/jd45/config.h b/keyboards/jd45/config.h new file mode 100644 index 000000000..ee989b7b4 --- /dev/null +++ b/keyboards/jd45/config.h @@ -0,0 +1,82 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT JD45 +#define DESCRIPTION q.m.k. keyboard firmware for JD45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +#define NO_DEBUG + +/* disable print */ +#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/jd45/jd45.c b/keyboards/jd45/jd45.c new file mode 100644 index 000000000..00c581047 --- /dev/null +++ b/keyboards/jd45/jd45.c @@ -0,0 +1 @@ +#include "jd45.h"
\ No newline at end of file diff --git a/keyboards/jd45/jd45.h b/keyboards/jd45/jd45.h new file mode 100644 index 000000000..04ac6649e --- /dev/null +++ b/keyboards/jd45/jd45.h @@ -0,0 +1,20 @@ +#ifndef JD45_H +#define JD45_H + +#include "quantum.h" + +/* JD45 keymap definition macro + */ +#define KEYMAP( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \ + K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \ + K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \ + K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \ +) { \ + { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \ + { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO }, \ + { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO }, \ + { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K43, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO } \ +} + +#endif diff --git a/keyboards/jd45/keymaps/default/keymap.c b/keyboards/jd45/keymaps/default/keymap.c new file mode 100644 index 000000000..95abb1505 --- /dev/null +++ b/keyboards/jd45/keymaps/default/keymap.c @@ -0,0 +1,17 @@ +#include "jd45.h" + +/* this keymap is to provide a basic keyboard layout for testing the matrix + * for more practical and complicated keymap refer to other keymaps in the same folder + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, QUOT, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + PAUSE, LCTL, LALT, DEL, SPC, DEL, LEFT, UP, DOWN, RIGHT ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/jd45/keymaps/justin/keymap.c b/keyboards/jd45/keymaps/justin/keymap.c new file mode 100644 index 000000000..c278abba5 --- /dev/null +++ b/keyboards/jd45/keymaps/justin/keymap.c @@ -0,0 +1,86 @@ +#include "jd45.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, F, P, G, J, L, U, Y, SCLN, QUOT, BSPC, + FN8, A, R, S, T, D, H, N, E, I, O, ENT, + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, FN6, + FN4, LGUI, FN7, FN2, FN1, SPC, FN5, RALT, FN3, FN0 ), +[1] = KEYMAP( + TRNS, FN10, FN11, FN12, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, DEL, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGUP, LEFT, RGHT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, END, PGDN, DOWN, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ), +[2] = KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS, + TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ), +[3] = KEYMAP( + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ), +[4] = KEYMAP( + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS, + TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ), +}; + +enum macro_id { + PSWD1, + PSWD2, + PSWD3, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_MINS), + [1] = ACTION_LAYER_MOMENTARY(1), // FN1 + [2] = ACTION_LAYER_MOMENTARY(2), // FN2 + [3] = ACTION_LAYER_MOMENTARY(3), // FN3 + [4] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_GRV), + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RGUI), + [6] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_CAPS), + [7] = ACTION_LAYER_MODS(4, MOD_LSFT), // FN4 + [8] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB), + + [10] = ACTION_MACRO(PSWD1), + [11] = ACTION_MACRO(PSWD2), + [12] = ACTION_MACRO(PSWD3), + + [29] = ACTION_BACKLIGHT_TOGGLE(), + [30] = ACTION_BACKLIGHT_INCREASE(), + [31] = ACTION_BACKLIGHT_DECREASE() + +}; + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case PSWD1: + return (record->event.pressed ? + MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) : + MACRO_NONE ); + case PSWD2: + return (record->event.pressed ? + MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) : + MACRO_NONE ); + case PSWD3: + return (record->event.pressed ? + MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) : + MACRO_NONE ); + //case VOLUP: + // return (record->event.pressed ? + // MACRO( D(VOLU), U(VOLU), END ) : + // MACRO_NONE ); + //case ALT_TAB: + // return (record->event.pressed ? + // MACRO( D(LALT), D(TAB), END ) : + // MACRO( U(TAB), END )); + } + return MACRO_NONE; +} diff --git a/keyboards/jd45/readme.md b/keyboards/jd45/readme.md new file mode 100644 index 000000000..2822666e8 --- /dev/null +++ b/keyboards/jd45/readme.md @@ -0,0 +1,4 @@ +JD45 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile new file mode 100644 index 000000000..b00a488b9 --- /dev/null +++ b/keyboards/kc60/Makefile @@ -0,0 +1,76 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + + +ifndef QUANTUM_DIR + include ../../Makefile +endif + diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h new file mode 100644 index 000000000..c4a9b9ff8 --- /dev/null +++ b/keyboards/kc60/config.h @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT kc60v2 +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0 +// Pins for rows include: D0 D1 F6 F7 D5 +// KC60 Version 2 +#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/kc60/kc60.c b/keyboards/kc60/kc60.c new file mode 100644 index 000000000..746ac634a --- /dev/null +++ b/keyboards/kc60/kc60.c @@ -0,0 +1 @@ +#include "kc60.h" diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h new file mode 100644 index 000000000..34eab4b2a --- /dev/null +++ b/keyboards/kc60/kc60.h @@ -0,0 +1,23 @@ +#ifndef KC60_H +#define KC60_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a multi-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO,K4A, K4B, K4C, K4D } \ +} + +#endif diff --git a/keyboards/kc60/keymaps/default/keymap.c b/keyboards/kc60/keymaps/default/keymap.c new file mode 100644 index 000000000..6f8352c69 --- /dev/null +++ b/keyboards/kc60/keymaps/default/keymap.c @@ -0,0 +1,24 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, RESET \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c new file mode 100644 index 000000000..99e95c232 --- /dev/null +++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c @@ -0,0 +1,42 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * Toggles between colemak and qwerty by tapping the bottom right key. + * Holding capslock key gives a layer like the KBParadise v60. + */ + [0] = KEYMAP( /* Basic Colemak */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(2), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, DF(1) \ + ), + [1] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, DF(0) \ + ), + [2] = KEYMAP( /* KBP v60-like arrows, media keys, etc */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, BL_INC, BL_DEC, BL_STEP, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, DEBUG, RESET, KC_TRNS, KC_NO \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/stanleylai/Makefile b/keyboards/kc60/keymaps/stanleylai/Makefile new file mode 100644 index 000000000..b8b2beda4 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/stanleylai/base_layer.png b/keyboards/kc60/keymaps/stanleylai/base_layer.png Binary files differnew file mode 100644 index 000000000..97235c6af --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/base_layer.png diff --git a/keyboards/kc60/keymaps/stanleylai/config.h b/keyboards/kc60/keymaps/stanleylai/config.h new file mode 100644 index 000000000..b5024a6d0 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/config.h @@ -0,0 +1,3 @@ +// Use configs from WS2812 enabled Keymap + +#include "../ws2812/config.h" diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c new file mode 100644 index 000000000..057c73bf4 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/keymap.c @@ -0,0 +1,86 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RGBL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// See base_layer.png and rgb_layer.png for layout reference + +// Base Default Layer +// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions. +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, MO(_FL), KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT), + +// Function layer +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_NO, KC_MPRV,KC_UP, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_MUTE,KC_VOLD,KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, LT(_RGBL, KC_PGUP),\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_TRNS,KC_HOME, KC_PGDN, KC_END), + +// RGB Layer +[_RGBL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + #else + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/kc60/keymaps/stanleylai/readme.md b/keyboards/kc60/keymaps/stanleylai/readme.md new file mode 100644 index 000000000..1db72610d --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/readme.md @@ -0,0 +1,26 @@ +Stanley Lai's Split Right Shift with Dedicated Arrow Keys +====================== + + + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Keymap Notes +- Keymap setup with split Right Shift in mind. +- Right-side modifiers are setup as dedicated arrow keys + +### Base Layer Reference +- Fn Layer indicated on keycap front legends. +- Tapping Caps Lock key toggles Caps. Holding it down momentarily switches us to the Fn Layer. +- Holding down "Fn" and "Page Down" momentarily switches us to the RGB Layer. Tapping "Page Down" behaves as expected. + + +### RGB Layer Reference + + +## WS2812 Support +By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference. + +### Build +To build this keymap, simply run `make KEYMAP=stanleylai`. diff --git a/keyboards/kc60/keymaps/stanleylai/rgb_layer.png b/keyboards/kc60/keymaps/stanleylai/rgb_layer.png Binary files differnew file mode 100644 index 000000000..2bba028bb --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/rgb_layer.png diff --git a/keyboards/kc60/keymaps/wigguno/Makefile b/keyboards/kc60/keymaps/wigguno/Makefile new file mode 100644 index 000000000..0d7d918d8 --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/Makefile @@ -0,0 +1,24 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c new file mode 100644 index 000000000..50b1d0f98 --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/keymap.c @@ -0,0 +1,62 @@ +// This keymap was designed to close to the default kc60 layout, with some useful changes, such as adding media keys. +// It also moves the reset key off the base layer, as in the default kc60 layout for this firmware. +// I have swapped FN and RGUI as my rainbow keyset has them in the opposite order. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Basic QWERTY + * ,-----------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |FN |Gui |Ctrl | + * `-----------------------------------------------------------' + */ + [0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL \ + ), + + /* + * ,-----------------------------------------------------------. + * | ` |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del | + * |-----------------------------------------------------------| + * | | | Up| | | | | | | | PS| | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| |BL-|BL+| | | | | | | + * |-----------------------------------------------------------| + * | |Prv| PP|Nxt| | | | |Hom|End| | | + * |-----------------------------------------------------------| + * | Rst| | | BL | | | | | + * `-----------------------------------------------------------' + * PS = Print Screen + * PP = Play/Pause + */ + [1] = KEYMAP( /* Function Layer */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DELETE, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, \ + RESET, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/wigguno/readme.md b/keyboards/kc60/keymaps/wigguno/readme.md new file mode 100644 index 000000000..55a9f60c7 --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/readme.md @@ -0,0 +1,14 @@ +Wigguno's KC60 Layout +====================== + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Changes from default QMK layout +The default QMK layout for KC60 does not have a function layer. It also has the bootloader-mode reset key bound. This keymap fixes both of these by adding a sensible function layer (including moving the reset key onto it, far away from the FN key). + +### Changes from the default KC60 layout +The default KC60 layout is good, but it was missing media keys. I've added previous, play/pause and next. I've also removed some of the keys from the function layer I didn't use. + +### Build +To enable NKRO you must be in the keymaps/wigguno directory when running make. diff --git a/keyboards/kc60/keymaps/ws2812/Makefile b/keyboards/kc60/keymaps/ws2812/Makefile new file mode 100644 index 000000000..891c44416 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h new file mode 100644 index 000000000..2f39ea8e5 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -0,0 +1,9 @@ +#include "../../config.h" + +/* WS2812B RGB Underglow LED */ +#define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg +#define RGBLIGHT_TIMER +#define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c new file mode 100644 index 000000000..1c0574df0 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/keymap.c @@ -0,0 +1,98 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL), KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * |~ |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | |UP | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | |LFT|DWN|RGT| | | | | | | | | + * |-----------------------------------------------------------| + * | |FN1|FN2|FN3|FN4|FN5|FN6|FN7|FN8| | | | + * |-----------------------------------------------------------| + * | | | | | | | |RSET| + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/kc60/keymaps/ws2812/readme.md b/keyboards/kc60/keymaps/ws2812/readme.md new file mode 100644 index 000000000..5588fd2d9 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/readme.md @@ -0,0 +1,21 @@ +KC60 with WS2812 RGB Underglow +====================== + + + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## WS2812 Support +By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](ws2812_wiring.jpg) for wiring reference. + +### Build +To build this keymap with WS2812 enabled, simply run `make KEYMAP=ws2812`. + +### Reference Images + + + + +### Additional Credits +Keymap based on work by [TerryMatthews](https://github.com/TerryMathews) for GH60 Satan. diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg Binary files differnew file mode 100644 index 000000000..5c62cfded --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg Binary files differnew file mode 100644 index 000000000..2eab21433 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg Binary files differnew file mode 100644 index 000000000..159d63904 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg Binary files differnew file mode 100644 index 000000000..61b749b66 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md new file mode 100644 index 000000000..acc0df68d --- /dev/null +++ b/keyboards/kc60/readme.md @@ -0,0 +1,27 @@ +KC60 (version 2.0) keyboard firmware +====================== + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building +Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. + +## WS2812 Support + + +Build with WS2812 Support by running `make KEYMAP=ws2812`. diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile new file mode 100644 index 000000000..ca077e636 --- /dev/null +++ b/keyboards/kinesis/Makefile @@ -0,0 +1,79 @@ + +## Project specific files + +SRC= matrix.c + +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming +CUSTOM_MATRIX=yes # need to do our own thing with the matrix + +ifndef QUANTUM_DIR + include ../../Makefile +endif + + diff --git a/keyboards/kinesis/config.h b/keyboards/kinesis/config.h new file mode 100644 index 000000000..8f1fdbdb6 --- /dev/null +++ b/keyboards/kinesis/config.h @@ -0,0 +1,174 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT kinesis-advantage +#define DESCRIPTION A custom keyboard + +// Mouse +#define MOUSEKEY_DELAY 20 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 4 +#define MOUSEKEY_TIME_TO_MAX 20 +#define MOUSEKEY_WHEEL_MAX_SPEED 1 +#define MOUSEKEY_WHEEL_DELTA 1 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 1 + +/* key matrix size */ +#define MATRIX_ROWS 16 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +//Passed through the port multipler, so 4 pins =16 +#define MATRIX_ROW_PINS { F0,F1, F2, F3 } + +// May be upside down. +#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/kinesis/docs/kicad/kinesis-cache.lib b/keyboards/kinesis/docs/kicad/kinesis-cache.lib new file mode 100644 index 000000000..f798d39d6 --- /dev/null +++ b/keyboards/kinesis/docs/kicad/kinesis-cache.lib @@ -0,0 +1,232 @@ +EESchema-LIBRARY Version 2.3 Date: Wednesday, November 12, 2014 'pmt' 10:15:19 pm +#encoding utf-8 +# +# AT90S4414-P +# +DEF AT90S4414-P IC 0 40 Y Y 1 F N +F0 "IC" -850 1880 40 H V L BNN +F1 "AT90S4414-P" 450 -1950 40 H V L BNN +F2 "DIL40" 0 0 30 H V C CIN +F3 "~" 0 0 60 H V C CNN +ALIAS AT90S8515-P +$FPLIST + 40DIP-ELL600 + 40dip600 +$ENDFPLIST +DRAW +S -850 1850 850 -1850 0 1 10 f +X (T0)PB0 1 1000 700 150 L 40 40 1 1 B +X (T1)PB1 2 1000 600 150 L 40 40 1 1 B +X (AIN0)PB2 3 1000 500 150 L 40 40 1 1 B +X (AIN1)PB3 4 1000 400 150 L 40 40 1 1 B +X (~SS~)PB4 5 1000 300 150 L 40 40 1 1 B +X (MOSI)PB5 6 1000 200 150 L 40 40 1 1 B +X (MISO)PB6 7 1000 100 150 L 40 40 1 1 B +X (SCK)PB7 8 1000 0 150 L 40 40 1 1 B +X ~RESET 9 -1000 1700 150 R 40 40 1 1 I +X (RXD)PD0 10 1000 -1000 150 L 40 40 1 1 B +X GND 20 0 -2000 150 U 40 40 1 1 W +X ALE 30 1000 850 150 L 40 40 1 1 O +X VCC 40 0 2000 150 D 40 40 1 1 W +X (TXD)PD1 11 1000 -1100 150 L 40 40 1 1 B +X (A8)PC0 21 1000 -150 150 L 40 40 1 1 B +X ICP 31 -1000 -1400 150 R 40 40 1 1 I +X (INT0)PD2 12 1000 -1200 150 L 40 40 1 1 B +X (A9)PC1 22 1000 -250 150 L 40 40 1 1 B +X (AD7)PA7 32 1000 1000 150 L 40 40 1 1 B +X (INT1)PD3 13 1000 -1300 150 L 40 40 1 1 B +X (A10)PC2 23 1000 -350 150 L 40 40 1 1 B +X (AD6)PA6 33 1000 1100 150 L 40 40 1 1 B +X PD4 14 1000 -1400 150 L 40 40 1 1 B +X (A11)PC3 24 1000 -450 150 L 40 40 1 1 B +X (AD5)PA5 34 1000 1200 150 L 40 40 1 1 B +X (OC1A)PD5 15 1000 -1500 150 L 40 40 1 1 B +X (A12)PC4 25 1000 -550 150 L 40 40 1 1 B +X (AD4)PA4 35 1000 1300 150 L 40 40 1 1 B +X (~WR~)PD6 16 1000 -1600 150 L 40 40 1 1 B +X (A13)PC5 26 1000 -650 150 L 40 40 1 1 B +X (AD3)PA3 36 1000 1400 150 L 40 40 1 1 B +X (~RD~)PD7 17 1000 -1700 150 L 40 40 1 1 B +X (A14)PC6 27 1000 -750 150 L 40 40 1 1 B +X (AD2)PA2 37 1000 1500 150 L 40 40 1 1 B +X XTAL2 18 -1000 1200 150 R 40 40 1 1 B +X (A15)PC7 28 1000 -850 150 L 40 40 1 1 B +X (AD1)PA1 38 1000 1600 150 L 40 40 1 1 B +X XTAL1 19 -1000 800 150 R 40 40 1 1 B +X OC1B 29 -1000 -1500 150 R 40 40 1 1 W +X (AD0)PA0 39 1000 1700 150 L 40 40 1 1 B +ENDDRAW +ENDDEF +# +# ATMEGA16U4-A +# +DEF ATMEGA16U4-A U 0 40 Y Y 1 F N +F0 "U" -950 1700 40 H V C CNN +F1 "ATMEGA16U4-A" 700 -1500 40 H V C CNN +F2 "TQFP44" 0 0 35 H V C CIN +F3 "~" 1100 1100 60 H V C CNN +ALIAS ATMEGA16U4RC-A ATMEGA32U4-A ATMEGA32U4RC-A +$FPLIST + TQFP44 +$ENDFPLIST +DRAW +S -1000 1650 950 -1450 0 1 10 f +X (INT6/AIN0)PE6 1 1100 -650 150 L 40 40 1 1 B +X UVCC 2 -450 1800 150 D 40 40 1 1 W +X D- 3 -1150 100 150 R 40 40 1 1 B +X D+ 4 -1150 200 150 R 40 40 1 1 B +X UGND 5 -400 -1600 150 U 40 40 1 1 P +X UCAP 6 -1150 -50 150 R 40 40 1 1 P +X VBUS 7 -1150 350 150 R 40 40 1 1 P +X (SS/PCINT0)PB0 8 1100 1550 150 L 40 40 1 1 B +X (SCLK/PCINT1)PB1 9 1100 1450 150 L 40 40 1 1 B +X (PDI/MOSI/PCINT2)PB2 10 1100 1350 150 L 40 40 1 1 B +X (RXD/INT2)PD2 20 1100 150 150 L 40 40 1 1 B +X (ADC13/OC1B/OC4B/PCINT13)PB6 30 1100 950 150 L 40 40 1 1 B +X (ADC1)PF1 40 1100 -950 150 L 40 40 1 1 B +X (PDO/MISO/PCINT3)PB3 11 1100 1250 150 L 40 40 1 1 B +X (TXD/INT3)PD3 21 1100 50 150 L 40 40 1 1 B +X (OC3A/~OC4A~)PC6 31 1100 650 150 L 40 40 1 1 B +X (ADC0)PF0 41 1100 -850 150 L 40 40 1 1 B +X (OC0A/OC1C/~RTS~/PCINT7)PB7 12 1100 850 150 L 40 40 1 1 B +X (XCK1/~CTS~)PD5 22 1100 -150 150 L 40 40 1 1 B +X (ICP3/CLK0/OC4A)PC7 32 1100 550 150 L 40 40 1 1 B +X AREF 42 -1150 -850 150 R 40 40 1 1 P +X ~RESET~ 13 -1150 1550 150 R 40 40 1 1 I +X GND 23 -50 -1600 150 U 40 40 1 1 W +X (~HWB~)PE2 33 1100 -550 150 L 40 40 1 1 B +X GND 43 150 -1600 150 U 40 40 1 1 W +X VCC 14 -200 1800 150 D 40 40 1 1 W +X AVCC 24 150 1800 150 D 40 40 1 1 W +X VCC 34 -100 1800 150 D 40 40 1 1 W +X AVCC 44 250 1800 150 D 40 40 1 1 W +X GND 15 -150 -1600 150 U 40 40 1 1 W +X (ICP2/ADC8)PD4 25 1100 -50 150 L 40 40 1 1 B +X GND 35 50 -1600 150 U 40 40 1 1 W +X XTAL2 16 -1150 950 150 R 40 40 1 1 O +X (T1/~OC4D~/ADC9)PD6 26 1100 -250 150 L 40 40 1 1 B +X (ADC7/TDI)PF7 36 1100 -1350 150 L 40 40 1 1 B +X XTAL1 17 -1150 1150 150 R 40 40 1 1 I +X (T0/OC4D/ADC10)PD7 27 1100 -350 150 L 40 40 1 1 B +X (ADC6/TDO)PF6 37 1100 -1250 150 L 40 40 1 1 B +X (OC0B/SCL/INT0)PD0 18 1100 350 150 L 40 40 1 1 B +X (ADC11/PCINT4)PB4 28 1100 1150 150 L 40 40 1 1 B +X (ADC5/TMS)PF5 38 1100 -1150 150 L 40 40 1 1 B +X (SDA/INT1)PD1 19 1100 250 150 L 40 40 1 1 B +X (ADC12/OC1A/~OC4B~/PCINT12)PB5 29 1100 1050 150 L 40 40 1 1 B +X (ADC4/TCK)PF4 39 1100 -1050 150 L 40 40 1 1 B +ENDDRAW +ENDDEF +# +# C +# +DEF C C 0 10 N Y 1 F N +F0 "C" 0 100 40 H V L CNN +F1 "C" 6 -85 40 H V L CNN +F2 "~" 38 -150 30 H V C CNN +F3 "~" 0 0 60 H V C CNN +$FPLIST + SM* + C? + C1-1 +$ENDFPLIST +DRAW +P 2 0 1 20 -80 -30 80 -30 N +P 2 0 1 20 -80 30 80 30 N +X ~ 1 0 200 170 D 40 40 1 1 P +X ~ 2 0 -200 170 U 40 40 1 1 P +ENDDRAW +ENDDEF +# +# CONN_7 +# +DEF CONN_7 P 0 40 Y N 1 F N +F0 "P" -30 0 60 V V C CNN +F1 "CONN_7" 70 0 60 V V C CNN +F2 "~" 0 0 60 H V C CNN +F3 "~" 0 0 60 H V C CNN +DRAW +S -100 350 150 -350 0 1 0 N +X P1 1 -350 300 250 R 50 50 1 1 P I +X P2 2 -350 200 250 R 50 50 1 1 P I +X P3 3 -350 100 250 R 50 50 1 1 P I +X P4 4 -350 0 250 R 50 50 1 1 P I +X P5 5 -350 -100 250 R 50 50 1 1 P I +X P6 6 -350 -200 250 R 50 50 1 1 P I +X P7 7 -350 -300 250 R 50 50 1 1 P I +ENDDRAW +ENDDEF +# +# GND +# +DEF ~GND #PWR 0 0 Y Y 1 F P +F0 "#PWR" 0 0 30 H I C CNN +F1 "GND" 0 -70 30 H I C CNN +F2 "~" 0 0 60 H V C CNN +F3 "~" 0 0 60 H V C CNN +DRAW +P 4 0 1 0 -50 0 0 -50 50 0 -50 0 N +X GND 1 0 0 0 U 30 30 1 1 W N +ENDDRAW +ENDDEF +# +# R +# +DEF R R 0 0 N Y 1 F N +F0 "R" 80 0 40 V V C CNN +F1 "R" 7 1 40 V V C CNN +F2 "~" -70 0 30 V V C CNN +F3 "~" 0 0 30 H V C CNN +$FPLIST + R? + SM0603 + SM0805 + R?-* + SM1206 +$ENDFPLIST +DRAW +S -40 150 40 -150 0 1 12 N +X ~ 1 0 250 100 D 60 60 1 1 P +X ~ 2 0 -250 100 U 60 60 1 1 P +ENDDRAW +ENDDEF +# +# USB-MINI-B +# +DEF USB-MINI-B CON 0 40 Y Y 1 F N +F0 "CON" -250 450 60 H V C CNN +F1 "USB-MINI-B" -50 -500 60 H V C CNN +F2 "~" 0 0 60 H V C CNN +F3 "~" 0 0 60 H V C CNN +$FPLIST + USB-Mini-B-Jack +$ENDFPLIST +DRAW +S -350 400 350 -400 0 1 0 N +X VBUS 1 -550 300 200 R 50 50 1 1 W +X D- 2 -550 150 200 R 50 50 1 1 B +X D+ 3 -550 0 200 R 50 50 1 1 B +X ID 4 -550 -150 200 R 50 50 1 1 B +X GND 5 -550 -300 200 R 50 50 1 1 W +X SHELL1 6 550 300 200 L 50 50 1 1 B +X SHELL2 7 550 150 200 L 50 50 1 1 B +X SHELL3 8 550 -150 200 L 50 50 1 1 B +X SHELL4 9 550 -300 200 L 50 50 1 1 B +ENDDRAW +ENDDEF +# +# VCC +# +DEF VCC #PWR 0 0 Y Y 1 F P +F0 "#PWR" 0 100 30 H I C CNN +F1 "VCC" 0 100 30 H V C CNN +F2 "~" 0 0 60 H V C CNN +F3 "~" 0 0 60 H V C CNN +DRAW +X VCC 1 0 0 0 U 20 20 0 0 W N +C 0 50 20 0 1 0 N +P 3 0 1 0 0 0 0 30 0 30 N +ENDDRAW +ENDDEF +# +#End Library diff --git a/keyboards/kinesis/docs/kicad/kinesis.pro b/keyboards/kinesis/docs/kicad/kinesis.pro new file mode 100644 index 000000000..9f130b509 --- /dev/null +++ b/keyboards/kinesis/docs/kicad/kinesis.pro @@ -0,0 +1,83 @@ +update=Wednesday, November 05, 2014 'pmt' 12:08:47 pm +version=1 +last_client=pcbnew +[cvpcb] +version=1 +NetIExt=net +[cvpcb/libraries] +EquName1=devcms +[general] +version=1 +[eeschema] +version=1 +PageLayoutDescrFile= +SubpartIdSeparator=0 +SubpartFirstId=65 +LibDir=../../../lib/kicad/library +NetFmtName= +RptD_X=0 +RptD_Y=100 +RptLab=1 +LabSize=60 +[eeschema/libraries] +LibName1=power +LibName2=device +LibName3=transistors +LibName4=conn +LibName5=linear +LibName6=regul +LibName7=74xx +LibName8=cmos4000 +LibName9=adc-dac +LibName10=memory +LibName11=xilinx +LibName12=special +LibName13=microcontrollers +LibName14=dsp +LibName15=microchip +LibName16=analog_switches +LibName17=motorola +LibName18=texas +LibName19=intel +LibName20=audio +LibName21=interface +LibName22=digital-audio +LibName23=philips +LibName24=display +LibName25=cypress +LibName26=siliconi +LibName27=opto +LibName28=atmel +LibName29=contrib +LibName30=valves +LibName31=custom +[pcbnew] +version=1 +LastNetListRead= +UseCmpFile=1 +PadDrill=1.016000000000 +PadDrillOvalY=1.016000000000 +PadSizeH=1.524000000000 +PadSizeV=1.524000000000 +PcbTextSizeV=1.500000000000 +PcbTextSizeH=1.500000000000 +PcbTextThickness=0.300000000000 +ModuleTextSizeV=1.000000000000 +ModuleTextSizeH=1.000000000000 +ModuleTextSizeThickness=0.150000000000 +SolderMaskClearance=0.000000000000 +SolderMaskMinWidth=0.000000000000 +DrawSegmentWidth=0.200000000000 +BoardOutlineThickness=0.100000000000 +ModuleOutlineThickness=0.150000000000 +[pcbnew/libraries] +LibDir=../../../lib/kicad/modules +LibName1=custom +LibName2=Sockets +LibName3=Connect +LibName4=Discret +LibName5=Divers +LibName6=Display +LibName7=LEDs +LibName8=SMD_Packages +LibName9=Sockets_DIP diff --git a/keyboards/kinesis/docs/kicad/kinesis.sch b/keyboards/kinesis/docs/kicad/kinesis.sch new file mode 100644 index 000000000..f75335aa0 --- /dev/null +++ b/keyboards/kinesis/docs/kicad/kinesis.sch @@ -0,0 +1,634 @@ +EESchema Schematic File Version 2 +LIBS:power +LIBS:device +LIBS:transistors +LIBS:conn +LIBS:linear +LIBS:regul +LIBS:74xx +LIBS:cmos4000 +LIBS:adc-dac +LIBS:memory +LIBS:xilinx +LIBS:special +LIBS:microcontrollers +LIBS:dsp +LIBS:microchip +LIBS:analog_switches +LIBS:motorola +LIBS:texas +LIBS:intel +LIBS:audio +LIBS:interface +LIBS:digital-audio +LIBS:philips +LIBS:display +LIBS:cypress +LIBS:siliconi +LIBS:opto +LIBS:atmel +LIBS:contrib +LIBS:valves +LIBS:custom +LIBS:kinesis-cache +EELAYER 27 0 +EELAYER END +$Descr A4 11693 8268 +encoding utf-8 +Sheet 1 1 +Title "" +Date "13 nov 2014" +Rev "" +Comp "" +Comment1 "" +Comment2 "" +Comment3 "" +Comment4 "" +$EndDescr +$Comp +L C C4 +U 1 1 545804FB +P 2850 4250 +F 0 "C4" H 2850 4350 40 0000 L CNN +F 1 "1uF" H 2856 4165 40 0000 L CNN +F 2 "~" H 2888 4100 30 0000 C CNN +F 3 "~" H 2850 4250 60 0000 C CNN + 1 2850 4250 + -1 0 0 1 +$EndComp +$Comp +L R R3 +U 1 1 545805E8 +P 2500 4000 +F 0 "R3" V 2580 4000 40 0000 C CNN +F 1 "22" V 2507 4001 40 0000 C CNN +F 2 "~" V 2430 4000 30 0000 C CNN +F 3 "~" H 2500 4000 30 0000 C CNN + 1 2500 4000 + 0 -1 -1 0 +$EndComp +$Comp +L R R2 +U 1 1 545805FA +P 2500 3800 +F 0 "R2" V 2580 3800 40 0000 C CNN +F 1 "22" V 2507 3801 40 0000 C CNN +F 2 "~" V 2430 3800 30 0000 C CNN +F 3 "~" H 2500 3800 30 0000 C CNN + 1 2500 3800 + 0 -1 -1 0 +$EndComp +Entry Wire Line + 6450 2450 6550 2550 +Entry Wire Line + 6450 2550 6550 2650 +Entry Wire Line + 6450 2650 6550 2750 +Entry Wire Line + 6450 2750 6550 2850 +Entry Wire Line + 6450 2950 6550 3050 +Entry Wire Line + 6450 3050 6550 3150 +Entry Wire Line + 6450 2850 6550 2950 +Entry Wire Line + 6450 3150 6550 3250 +Wire Wire Line + 10250 1800 10750 1800 +Entry Wire Line + 10750 1800 10850 1900 +Entry Wire Line + 10750 1900 10850 2000 +Entry Wire Line + 10750 2000 10850 2100 +Entry Wire Line + 10750 2800 10850 2900 +Entry Wire Line + 10750 2900 10850 3000 +Entry Wire Line + 10750 3000 10850 3100 +Entry Wire Line + 10750 3100 10850 3200 +Entry Wire Line + 10750 3200 10850 3300 +Entry Wire Line + 10750 3300 10850 3400 +$Comp +L AT90S8515-P IC2 +U 1 1 545A62EA +P 9250 3500 +F 0 "IC2" H 8400 5380 40 0000 L BNN +F 1 "AT90S8515-P" H 9700 1550 40 0000 L BNN +F 2 "DIL40" H 9250 3500 30 0000 C CIN +F 3 "" H 9250 3500 60 0000 C CNN + 1 9250 3500 + 1 0 0 -1 +$EndComp +NoConn ~ 10250 2650 +Entry Wire Line + 10750 3650 10850 3750 +Entry Wire Line + 10750 3750 10850 3850 +Entry Wire Line + 10750 3850 10850 3950 +Entry Wire Line + 10750 3950 10850 4050 +Entry Wire Line + 10750 4050 10850 4150 +Entry Wire Line + 10750 4150 10850 4250 +Entry Wire Line + 10750 4350 10850 4450 +Entry Wire Line + 10750 4250 10850 4350 +NoConn ~ 8250 4900 +NoConn ~ 8250 5000 +NoConn ~ 8250 1800 +Wire Wire Line + 10250 1900 10750 1900 +Wire Wire Line + 10250 2000 10750 2000 +Wire Wire Line + 10250 2100 10750 2100 +Wire Wire Line + 10250 2200 10750 2200 +Wire Wire Line + 10250 2300 10750 2300 +Wire Wire Line + 10250 2400 10750 2400 +Wire Wire Line + 10250 2500 10750 2500 +Text Label 10350 1800 0 60 ~ 0 +A +Text Label 10350 1900 0 60 ~ 0 +B +Text Label 10350 2000 0 60 ~ 0 +C +Text Label 10350 2100 0 60 ~ 0 +G +Wire Wire Line + 10250 2800 10750 2800 +Wire Wire Line + 10250 2900 10750 2900 +Wire Wire Line + 10250 3000 10750 3000 +Wire Wire Line + 10250 3100 10750 3100 +Wire Wire Line + 10250 3200 10750 3200 +Wire Wire Line + 10250 3300 10750 3300 +Wire Wire Line + 10250 3400 10750 3400 +Wire Wire Line + 10250 3500 10750 3500 +Text Label 10350 2800 0 60 ~ 0 +DL2 +Text Label 10350 2900 0 60 ~ 0 +DR1 +Text Label 10350 3000 0 60 ~ 0 +DR2 +Text Label 10350 3100 0 60 ~ 0 +DL1 +Text Label 10350 3400 0 60 ~ 0 +SCL +Text Label 10350 3500 0 60 ~ 0 +SDA +Wire Wire Line + 10250 3650 10750 3650 +Wire Wire Line + 10250 3750 10750 3750 +Wire Wire Line + 10250 3850 10750 3850 +Wire Wire Line + 10250 3950 10750 3950 +Wire Wire Line + 10250 4050 10750 4050 +Wire Wire Line + 10250 4150 10750 4150 +Wire Wire Line + 10250 4250 10750 4250 +Wire Wire Line + 10250 4350 10750 4350 +Text Label 10350 3650 0 60 ~ 0 +R1 +Text Label 10350 3750 0 60 ~ 0 +R2 +Text Label 10350 3850 0 60 ~ 0 +R3 +Text Label 10350 3950 0 60 ~ 0 +R4 +Text Label 10350 4050 0 60 ~ 0 +R5 +Text Label 10350 4150 0 60 ~ 0 +R6 +Text Label 10350 4250 0 60 ~ 0 +R7 +Text Label 10350 4350 0 60 ~ 0 +R8 +Wire Wire Line + 10250 4500 10750 4500 +Wire Wire Line + 10250 4600 10750 4600 +Wire Wire Line + 10250 4700 10750 4700 +Wire Wire Line + 10250 4800 10750 4800 +Wire Wire Line + 10250 4900 10750 4900 +Wire Wire Line + 10250 5000 10750 5000 +Wire Wire Line + 10250 5100 10750 5100 +Wire Wire Line + 10250 5200 10750 5200 +Text Label 10350 4600 0 60 ~ 0 +FS1 +Text Label 10350 5000 0 60 ~ 0 +FS3 +Text Label 10350 5200 0 60 ~ 0 +FS2 +$Comp +L GND #PWR01 +U 1 1 545A7377 +P 9250 5600 +F 0 "#PWR01" H 9250 5600 30 0001 C CNN +F 1 "GND" H 9250 5530 30 0001 C CNN +F 2 "" H 9250 5600 60 0000 C CNN +F 3 "" H 9250 5600 60 0000 C CNN + 1 9250 5600 + 1 0 0 -1 +$EndComp +Wire Wire Line + 9250 5500 9250 5600 +Text Label 10350 4700 0 60 ~ 0 +CLOCK +Text Label 10350 4800 0 60 ~ 0 +DATA +NoConn ~ 10750 4700 +NoConn ~ 10750 4800 +Text Label 10350 3200 0 60 ~ 0 +KP +Text Label 10350 3300 0 60 ~ 0 +PGM +Text Label 10350 2500 0 60 ~ 0 +BUZZ +NoConn ~ 8250 2300 +NoConn ~ 8250 2700 +$Comp +L GND #PWR02 +U 1 1 545A7565 +P 4750 5700 +F 0 "#PWR02" H 4750 5700 30 0001 C CNN +F 1 "GND" H 4750 5630 30 0001 C CNN +F 2 "" H 4750 5700 60 0000 C CNN +F 3 "" H 4750 5700 60 0000 C CNN + 1 4750 5700 + 1 0 0 -1 +$EndComp +Entry Wire Line + 6450 3650 6550 3750 +Entry Wire Line + 6450 3750 6550 3850 +Entry Wire Line + 6450 4150 6550 4250 +Entry Wire Line + 6450 4250 6550 4350 +Entry Wire Line + 6450 4050 6550 4150 +Entry Wire Line + 6450 4350 6550 4450 +NoConn ~ 3750 2850 +Wire Wire Line + 1200 2000 6450 2000 +NoConn ~ 3750 3050 +Wire Wire Line + 2750 3800 3750 3800 +Wire Wire Line + 2750 3900 3750 3900 +Wire Wire Line + 2750 3900 2750 4000 +Wire Bus Line + 6550 2100 6550 6050 +Wire Bus Line + 10850 1600 10850 6050 +Text Label 6050 4350 0 60 ~ 0 +DL1 +Text Label 6050 4250 0 60 ~ 0 +DR2 +Text Label 6050 4150 0 60 ~ 0 +DR1 +Text Label 6050 4050 0 60 ~ 0 +DL2 +Text Label 6050 2450 0 60 ~ 0 +R1 +Text Label 6050 2550 0 60 ~ 0 +R2 +Text Label 6050 2650 0 60 ~ 0 +R3 +Text Label 6050 2750 0 60 ~ 0 +R4 +Text Label 6050 2850 0 60 ~ 0 +R5 +Text Label 6050 2950 0 60 ~ 0 +R6 +Text Label 6050 3050 0 60 ~ 0 +R7 +Text Label 6050 3150 0 60 ~ 0 +R8 +Text Label 6050 5050 0 60 ~ 0 +A +Text Label 6050 5150 0 60 ~ 0 +B +Text Label 6050 5250 0 60 ~ 0 +C +Text Label 6050 5350 0 60 ~ 0 +G +Text Label 1300 3800 0 60 ~ 0 +D+ +Text Label 1300 4000 0 60 ~ 0 +D- +NoConn ~ 10750 2200 +NoConn ~ 10750 2300 +NoConn ~ 10750 2400 +Text Label 10350 4500 0 60 ~ 0 +GND +NoConn ~ 10750 4900 +NoConn ~ 10750 5100 +Text Label 6050 3450 0 60 ~ 0 +KP +Text Label 6050 3350 0 60 ~ 0 +PGM +$Comp +L ATMEGA32U4-A U1 +U 1 1 5462E0B1 +P 4900 4000 +F 0 "U1" H 3950 5700 40 0000 C CNN +F 1 "ATMEGA32U4-A" H 5600 2500 40 0000 C CNN +F 2 "TQFP44" H 4900 4000 35 0000 C CIN +F 3 "" H 6000 5100 60 0000 C CNN + 1 4900 4000 + 1 0 0 -1 +$EndComp +Wire Wire Line + 3750 4850 3750 5600 +Wire Wire Line + 4450 2200 5150 2200 +Connection ~ 4700 2200 +Connection ~ 4800 2200 +Connection ~ 5050 2200 +Connection ~ 4800 2000 +Wire Wire Line + 6000 2450 6450 2450 +Wire Wire Line + 6000 2550 6450 2550 +Wire Wire Line + 6000 2650 6450 2650 +Wire Wire Line + 6000 2750 6450 2750 +Wire Wire Line + 6000 2850 6450 2850 +Wire Wire Line + 6000 2950 6450 2950 +Wire Wire Line + 6000 3050 6450 3050 +Wire Wire Line + 6000 3150 6450 3150 +Wire Wire Line + 6000 5050 6450 5050 +Wire Wire Line + 6000 5150 6450 5150 +Wire Wire Line + 6000 5250 6450 5250 +Wire Wire Line + 6000 4050 6450 4050 +Wire Wire Line + 6000 4150 6450 4150 +Wire Wire Line + 6000 4250 6450 4250 +Wire Wire Line + 6000 4350 6450 4350 +Wire Wire Line + 6000 4550 6450 4550 +Entry Wire Line + 6450 3350 6550 3450 +Entry Wire Line + 6450 3450 6550 3550 +Entry Wire Line + 6450 5050 6550 5150 +Entry Wire Line + 6450 5150 6550 5250 +Entry Wire Line + 6450 5250 6550 5350 +Entry Wire Line + 6450 5350 6550 5450 +Entry Wire Line + 6450 4650 6550 4750 +Wire Wire Line + 6000 3350 6450 3350 +Wire Wire Line + 6000 3450 6450 3450 +Wire Wire Line + 1200 5600 6450 5600 +Connection ~ 4950 5600 +Connection ~ 4850 5600 +Wire Wire Line + 4750 5600 4750 5700 +Connection ~ 4750 5600 +Connection ~ 4500 5600 +Text Label 6050 4550 0 60 ~ 0 +HWB +Wire Wire Line + 6000 5350 6450 5350 +Wire Wire Line + 6000 3650 6450 3650 +Wire Wire Line + 6000 3750 6450 3750 +Text Label 6050 3650 0 60 ~ 0 +SCL +Text Label 6050 3750 0 60 ~ 0 +SDA +Wire Wire Line + 6000 3850 6450 3850 +Wire Wire Line + 6000 3950 6450 3950 +Wire Wire Line + 6000 4650 6450 4650 +Text Label 6050 4650 0 60 ~ 0 +BUZZ +NoConn ~ 10750 4600 +NoConn ~ 10750 5000 +NoConn ~ 10750 5200 +Entry Wire Line + 10750 3400 10850 3500 +Entry Wire Line + 10750 3500 10850 3600 +Entry Wire Line + 10750 4500 10850 4600 +Wire Wire Line + 2850 4050 3750 4050 +Text Label 2950 4050 0 60 ~ 0 +UCAP +Wire Wire Line + 6000 4850 6450 4850 +Wire Wire Line + 6000 4950 6450 4950 +NoConn ~ 6450 4850 +NoConn ~ 6450 4950 +NoConn ~ 6450 4550 +$Comp +L USB-MINI-B CON1 +U 1 1 546431C1 +P 2100 5050 +F 0 "CON1" H 1850 5500 60 0000 C CNN +F 1 "USB-MINI-B" H 2050 4550 60 0000 C CNN +F 2 "" H 2100 5050 60 0000 C CNN +F 3 "" H 2100 5050 60 0000 C CNN + 1 2100 5050 + 0 1 1 0 +$EndComp +$Comp +L VCC #PWR03 +U 1 1 54643698 +P 2400 4400 +F 0 "#PWR03" H 2400 4500 30 0001 C CNN +F 1 "VCC" H 2400 4500 30 0000 C CNN +F 2 "" H 2400 4400 60 0000 C CNN +F 3 "" H 2400 4400 60 0000 C CNN + 1 2400 4400 + 1 0 0 -1 +$EndComp +Text Notes 2600 2750 0 60 ~ 0 +Teensy 2.0\n(not fully drawn) +$Comp +L CONN_7 B7K-PH-K-S1 +U 1 1 54643939 +P 1950 6900 +F 0 "B7K-PH-K-S1" V 1920 6900 60 0000 C CNN +F 1 "CONN_7" V 2020 6900 60 0000 C CNN +F 2 "" H 1950 6900 60 0000 C CNN +F 3 "" H 1950 6900 60 0000 C CNN + 1 1950 6900 + 1 0 0 -1 +$EndComp +Connection ~ 3750 5600 +Connection ~ 2400 5600 +Connection ~ 2250 5600 +Connection ~ 1950 5600 +Wire Wire Line + 2400 4400 2400 4500 +Wire Wire Line + 2250 4000 2250 4500 +Wire Wire Line + 1200 3800 2250 3800 +Wire Wire Line + 2100 3800 2100 4500 +Wire Wire Line + 2850 4450 2850 5600 +Connection ~ 2850 5600 +Entry Wire Line + 1100 6800 1200 6900 +Entry Wire Line + 1100 6900 1200 7000 +Entry Wire Line + 1100 7000 1200 7100 +Entry Wire Line + 1100 6700 1200 6800 +Wire Wire Line + 1200 6600 1600 6600 +Wire Wire Line + 1200 6700 1600 6700 +Wire Wire Line + 1200 6800 1600 6800 +Wire Wire Line + 1200 6900 1600 6900 +Wire Wire Line + 1200 7000 1600 7000 +Wire Wire Line + 1200 7100 1600 7100 +Wire Wire Line + 1200 7200 1600 7200 +Text Label 1300 6600 0 60 ~ 0 +FS2 +Text Label 1300 6700 0 60 ~ 0 +FS1 +Text Label 1300 6800 0 60 ~ 0 +VCC +Text Label 1300 6900 0 60 ~ 0 +D- +Text Label 1300 7000 0 60 ~ 0 +D+ +Text Label 1300 7100 0 60 ~ 0 +GND +Text Label 1300 7200 0 60 ~ 0 +FS3 +NoConn ~ 3750 2450 +Wire Wire Line + 3600 2000 3600 3650 +Wire Wire Line + 3600 3650 3750 3650 +NoConn ~ 1950 4500 +Wire Bus Line + 1100 1900 1100 7100 +NoConn ~ 1200 6600 +NoConn ~ 1200 6700 +NoConn ~ 1200 7200 +Connection ~ 2100 3800 +Wire Wire Line + 1200 4000 2250 4000 +Entry Wire Line + 1100 3700 1200 3800 +Entry Wire Line + 1100 3900 1200 4000 +Text Label 10350 1500 0 60 ~ 0 +VCC +Entry Wire Line + 1100 1900 1200 2000 +Text Label 1250 2000 0 60 ~ 0 +VCC +Entry Wire Line + 1100 5500 1200 5600 +Connection ~ 1800 5600 +Text Label 1300 5600 0 60 ~ 0 +GND +Wire Wire Line + 9250 5500 10750 5500 +Entry Wire Line + 10750 5500 10850 5600 +Text Label 10350 5500 0 60 ~ 0 +GND +Wire Wire Line + 9250 1500 10750 1500 +Entry Wire Line + 10750 1500 10850 1600 +Connection ~ 3600 2000 +Wire Wire Line + 4800 2000 4800 2200 +Entry Wire Line + 6450 2000 6550 2100 +Text Label 6050 2000 0 60 ~ 0 +VCC +Connection ~ 5050 5600 +Entry Wire Line + 6450 5600 6550 5700 +Text Label 6050 5600 0 60 ~ 0 +GND +NoConn ~ 6450 3850 +NoConn ~ 6450 3950 +Wire Wire Line + 1800 4500 1500 4500 +Wire Wire Line + 1500 4500 1500 5600 +Connection ~ 1500 5600 +Entry Wire Line + 10750 2500 10850 2600 +Entry Wire Line + 10750 2100 10850 2200 +Text Notes 1000 5300 1 60 ~ 0 +Sacrificial USB cable from header to Teensy +Text Notes 7850 5950 0 60 ~ 0 +Ribbon cable between Teensy pins and socket +Wire Bus Line + 10850 6050 6550 6050 +$EndSCHEMATC diff --git a/keyboards/kinesis/docs/photos/P1050573.jpg b/keyboards/kinesis/docs/photos/P1050573.jpg Binary files differnew file mode 100644 index 000000000..027ab9efb --- /dev/null +++ b/keyboards/kinesis/docs/photos/P1050573.jpg diff --git a/keyboards/kinesis/docs/photos/P1050574.jpg b/keyboards/kinesis/docs/photos/P1050574.jpg Binary files differnew file mode 100644 index 000000000..d49c492b8 --- /dev/null +++ b/keyboards/kinesis/docs/photos/P1050574.jpg diff --git a/keyboards/kinesis/docs/photos/P1050575.jpg b/keyboards/kinesis/docs/photos/P1050575.jpg Binary files differnew file mode 100644 index 000000000..50cc9897c --- /dev/null +++ b/keyboards/kinesis/docs/photos/P1050575.jpg diff --git a/keyboards/kinesis/docs/readme.txt b/keyboards/kinesis/docs/readme.txt new file mode 100644 index 000000000..af33ac490 --- /dev/null +++ b/keyboards/kinesis/docs/readme.txt @@ -0,0 +1,52 @@ +This directory of documentation was copied from https://github.com/wjanssens/tmk_keyboard/tree/master/keyboard/kinesis +and is probably Copyright 2014 Warren Janssens <warren.janssens@gmail.com> +and probably released under GPL v2, which may be recovered at <http://www.gnu.org/licenses/>. + +Row configuration +PF0 A +PF1 B +PF2 C +PF3 G 0 = U4, 1 = U5 + +Column configuration + 4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7 + r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 +PB0 21 c1 f6 f8 f7 5 4 3 2 1 =+ +PB1 22 c2 f3 f5 f4 t r e w q TAB +PB2 23 c3 ESC f2 f1 g f d s a CL +PB3 24 c4 f9 f11 f10 b v c x z LS UP DN [{ ]} +PB4 25 c5 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_ +PB5 26 c6 PB PGM KPD y u i o p \ +PB6 27 c7 LC DL BS RC EN SP h j k l ;: '" +PB7 28 c8 RA PU PD n m ,< .> /? RS + */ + + +40 pin connector + + DL2 1 40 VCC + DR1 2 39 A + DR2 3 38 B + DL1 4 37 C + KPD 5 36 G + PGM 6 35 + SCL 7 34 + SDA 8 33 + RST 9 32 BUZZ + WP 10 31 EA + FS1 11 30 ALE + CLOCK 12 29 PSEN + DATA 13 28 r8 + 14 27 r7 + FS3 15 26 r6 + 16 25 r5 + FS2 17 24 r4 + XTAL1 18 23 r3 + XTAL2 19 22 r2 + GND 20 21 r1 + + +references: +https://github.com/chrisandreae/keyboard-firmware + + diff --git a/keyboards/kinesis/docs/schematic.png b/keyboards/kinesis/docs/schematic.png Binary files differnew file mode 100644 index 000000000..fa9405a1f --- /dev/null +++ b/keyboards/kinesis/docs/schematic.png diff --git a/keyboards/kinesis/keymaps/default/Makefile b/keyboards/kinesis/keymaps/default/Makefile new file mode 100644 index 000000000..9d3df5964 --- /dev/null +++ b/keyboards/kinesis/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kinesis/keymaps/default/config.h b/keyboards/kinesis/keymaps/default/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/kinesis/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/kinesis/keymaps/default/keymap.c b/keyboards/kinesis/keymaps/default/keymap.c new file mode 100644 index 000000000..3bf80699c --- /dev/null +++ b/keyboards/kinesis/keymaps/default/keymap.c @@ -0,0 +1,116 @@ +#include "kinesis.h" +#include "action_layer.h" + +#define QWERTY 0 // Base qerty +#define SYMB 1// Symbol layer + +// An almost entirely blank keymap. Test layers with the upper right hand key - 1 in normal mode, reset in layer 2. + + +/**************************************************************************************************** +* +* Keymap: Default Layer in Qwerty +* +* ,-------------------------------------------------------------------------------------------------------------------. +* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | PSCR | SLCK | PAUS | FN0 | BOOT | +* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| +* | =+ | 1! | 2@ | 3# | 4$ | 5% | | 6^ | 7& | 8* | 9( | 0) | -_ | +* |--------+------+------+------+------+------| +------+------+------+------+------+--------| +* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \| | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | Caps | A | S | D | F | G | | H | J | K | L | ;: | '" | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | Shift | Z | X | C | V | B | | N | M | ,. | .> | /? | Shift | +* `--------+------+------+------+------+------- `------+------+------+------+------+--------' +* | `~ | INS | Left | Right| | Up | Down | [{ | ]} | +* `---------------------------' `---------------------------' +* ,-------------. ,-------------. +* | Ctrl | Alt | | Gui | Ctrl | +* ,------|------|------| |------+------+------. +* | | | Home | | PgUp | | | +* | BkSp | Del |------| |------|Return| Space| +* | | | End | | PgDn | | | +* `--------------------' `--------------------' +*/ + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[QWERTY] = KEYMAP( + KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8, + KC_EQL, KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 , + KC_TAB, KC_Q ,KC_W ,KC_E ,KC_R ,KC_T , + KC_CAPS,KC_A ,KC_S ,KC_D ,KC_F ,KC_G , + KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B , + KC_GRV ,KC_INS ,KC_LEFT,KC_RGHT, + KC_LCTL,KC_LALT, + KC_HOME, + KC_BSPC,KC_DEL ,KC_END , + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1, + KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS, + KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, + KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, + KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT, + KC_UP ,KC_DOWN,KC_LBRC,KC_RBRC, + KC_RGUI,KC_RCTL, + KC_PGUP, + KC_PGDN,KC_ENTER ,KC_SPC + ), +[SYMB] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, RESET, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols) + + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kinesis/keymaps/default/readme.md b/keyboards/kinesis/keymaps/default/readme.md new file mode 100644 index 000000000..da033be1e --- /dev/null +++ b/keyboards/kinesis/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for kinesis-advantage diff --git a/keyboards/kinesis/keymaps/programmer/Makefile b/keyboards/kinesis/keymaps/programmer/Makefile new file mode 100644 index 000000000..9d3df5964 --- /dev/null +++ b/keyboards/kinesis/keymaps/programmer/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kinesis/keymaps/programmer/config.h b/keyboards/kinesis/keymaps/programmer/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/kinesis/keymaps/programmer/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/kinesis/keymaps/programmer/keymap.c b/keyboards/kinesis/keymaps/programmer/keymap.c new file mode 100644 index 000000000..83fb7bd5f --- /dev/null +++ b/keyboards/kinesis/keymaps/programmer/keymap.c @@ -0,0 +1,245 @@ +#include "kinesis.h" +#include "action_layer.h" +#include "mousekey.h" + +#define QWERTY 0 // Base qerty +#define SYMB 1// Symbol layer +#define MOUSE 2// + + + + +/* Macros */ +enum { + NONE = 0, + // Diagonal mouse movement + A_MUL, + A_MUR, + A_MDL, + A_MDR, +}; + + +// Borrowing very heavily from +// https://github.com/alvicstep/tmk_keyboard +/**************************************************************************************************** +* +* Keymap: Default Layer in Qwerty +* +* ,-------------------------------------------------------------------------------------------------------------------. +* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT | +* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| +* | =+ | 1! | 2@ | 3# | 4$ | 5% | | 6^ | 7& | 8* | 9( | 0) | -_ | +* |--------+------+------+------+------+------| +------+------+------+------+------+--------| +* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \| | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* |MouseFN1| A | S | D | F | G | | H | J | K | L | ;: | '" | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | Shift | Z | X | C | V | B | | N | M | ,. | .> | /? | Shift | +* `--------+------+------+------+------+------- `------+------+------+------+------+--------' +* | `~ | ESC |MOUSE1|MOUSE2| | [{ | ]} | ESC | GUI | +* `---------------------------' `---------------------------' +* ,-------------. ,-------------. +* | Ctrl | Alt | | Gui | Ctrl | +* ,------|------|------| |------+------+------. +* | | | Home | | PgUp | | | +* | BkSp | Del |------| |------|Return| Space| +* | | | End | | PgDn | | | +* `--------------------' `--------------------' +*/ + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[QWERTY] = KEYMAP( + KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8, + KC_EQL, KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 , + KC_TAB, KC_Q ,KC_W ,KC_E ,KC_R ,KC_T , + KC_FN1 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G , + KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B , + KC_GRV ,KC_ESC, KC_BTN1,KC_BTN2, + KC_LCTL,KC_LALT, + KC_HOME, + KC_BSPC,KC_DEL ,KC_FN0 , + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_FN0 ,KC_FN1 ,KC_FN2, KC_NO, RESET, + KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS, + KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, + KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, + KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT, + KC_LBRC,KC_RBRC, KC_ESC, KC_RGUI, + KC_RGUI,KC_RCTL, + KC_PGUP, + KC_PGDN,KC_ENTER ,KC_SPC + ), +[SYMB] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, KC_2, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), +/* Keymap: Movement and function layer +* +* ,-------------------------------------------------------------------------------------------------------------------. +* | Caps | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | Tada | bOOT | +* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| +* | =+ | ! | @ | # | $ | % | | ^ | & | * | ( | ) |MS Fast | +* |--------+------+------+------+------+------| +------+------+------+------+------+--------| +* | Tab | | | Up | |PgUp | | MwU |MS_UL | MS_U |MS_UR | | Ms Norm| +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* |MouseFN1| C^A | Left | Down |Right | C^E | | | MS_L |Mouse1| MS_R | |MS Slow | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | | GuiZ | GUI X| GUI C| GUI_V|PgDown| | MWD | MDown|MS Dwn|MS_DR | ? | | +* `--------+------+------+------+------+------- `------+------+------+------+------+--------' +* | `~ | ESC | < | > | | { | } | ESC | | +* `---------------------------' `---------------------------' +* ,-------------. ,-------------. +* | Ctrl | Alt | | Gui | Ctrl | +* ,------|------|------| |------+------+------. +* | | | Home | | PgUp | | | +* | BkSp | Del |------| |------|Mouse1|Mouse2| +* | | | End | | PgDn |LClick|Rclick| +* `--------------------' `--------------------' +*/ + + +[MOUSE] = KEYMAP( + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_EXLM ,KC_AT, KC_HASH, KC_DLR ,KC_PERC , + KC_TRNS, KC_NO, KC_NO, KC_UP, KC_NO, KC_PGUP, + KC_FN1, LCTL(KC_A),KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E), + KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN, + KC_TRNS, KC_TRNS, KC_LABK, KC_RABK, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0,RESET, + KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ACL2, + KC_WH_U, M(A_MUL), KC_MS_U, M(A_MUR), KC_NO, KC_ACL1, + KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_ACL0, + KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), KC_TRNS, KC_TRNS, + KC_LCBR, KC_RCBR, KC_ESC, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_BTN1, KC_BTN2 + ), + + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols) + [1] = ACTION_LAYER_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols) + [2] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols) + + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + + // from algernon's ErgoDox EZ layout, + case A_MUL: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MUR: + if (record->event.pressed) { + mousekey_on(KC_MS_UP); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_UP); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + + case A_MDL: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_LEFT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_LEFT); + } + mousekey_send(); + break; + + case A_MDR: + if (record->event.pressed) { + mousekey_on(KC_MS_DOWN); + mousekey_on(KC_MS_RIGHT); + } else { + mousekey_off(KC_MS_DOWN); + mousekey_off(KC_MS_RIGHT); + } + mousekey_send(); + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + + +} + +void matrix_scan_user(void) { + int8_t layer = biton32(layer_state); + + switch (layer) { + case 1: + all_led_off(); + break; + case 2: + if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) { + all_led_off(); + caps_lock_led_on(); + } + break; + case 0: + all_led_off(); + num_lock_led_on(); + break; + default: + break; + } + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kinesis/keymaps/programmer/readme.md b/keyboards/kinesis/keymaps/programmer/readme.md new file mode 100644 index 000000000..76356a687 --- /dev/null +++ b/keyboards/kinesis/keymaps/programmer/readme.md @@ -0,0 +1,2 @@ +# a programmer friendly keymap for the kinesis-advantage +# not really baked yet. diff --git a/keyboards/kinesis/kinesis.c b/keyboards/kinesis/kinesis.c new file mode 100644 index 000000000..1fee90e6f --- /dev/null +++ b/keyboards/kinesis/kinesis.c @@ -0,0 +1,106 @@ +#include "kinesis.h" + +// begin section origin https://github.com/alvicstep/tmk_keyboard + + +void all_led_off(void) +{ + PORTD = 0b11111111; +} + +void all_led_on(void) +{ + PORTD = 0b00000000; +} +void num_lock_led_on(void) +{ + PORTD = 0b11101111; +} + +void caps_lock_led_on(void) +{ + PORTD = 0b01111111; +} + +void scroll_lock_led_on(void) +{ + PORTD = 0b11011111; +} +void keypad_led_on(void) +{ + PORTD = 0b10111111; +} +void blink_all_leds(void) +{ + all_led_on(); + _delay_ms(500); + + all_led_off(); + _delay_ms(100); + + caps_lock_led_on(); + _delay_ms(100); + + num_lock_led_on(); + _delay_ms(100); + + scroll_lock_led_on(); + _delay_ms(100); + + keypad_led_on(); + _delay_ms(100); + + //back + + scroll_lock_led_on(); + _delay_ms(100); + + num_lock_led_on(); + _delay_ms(100); + + caps_lock_led_on(); + _delay_ms(100); + + all_led_off(); +} + +// End section origin https://github.com/alvicstep/tmk_keyboard + + void matrix_init_kb(void) { + blink_all_leds(); + matrix_init_user(); +} + + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + +//Copyright 2014 Warren Janssens <warren.janssens@gmail.com> + uint8_t leds = 0xF0; + if (usb_led & 1 << USB_LED_NUM_LOCK) + leds &= ~0x10; + if (usb_led & 1 << USB_LED_CAPS_LOCK) + leds &= ~0x80; + if (usb_led & 1 << USB_LED_SCROLL_LOCK) + leds &= ~0x20; + PORTD = (PORTD & 0x0F) | leds; + + led_set_user(usb_led); + +} + + diff --git a/keyboards/kinesis/kinesis.h b/keyboards/kinesis/kinesis.h new file mode 100644 index 000000000..c04fbda15 --- /dev/null +++ b/keyboards/kinesis/kinesis.h @@ -0,0 +1,67 @@ +#ifndef KINESIS_H +#define KINESIS_H + +#include "quantum.h" + + +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +#define KEYMAP( \ + k02,k22,k12,k01,k21,k11,k00,k20,k10, \ + k80,k70,k60,k50,k40,k30, \ + k81,k71,k61,k51,k41,k31, \ + k82,k72,k62,k52,k42,k32, \ + k83,k73,k63,k53,k43,k33, \ + k74,k64,k54,k34, \ + k36,k35, \ + k55, \ + k56,k46,k75, \ + k03,k23,k13,k04,k24,k14,k05,k85,k84, \ + k94,kA4,kB4,kD4,kE4,kF4, \ + k95,kA5,kB5,kD5,kE5,kF5, \ + k96,kA6,kB6,kD6,kE6,kF6, \ + k97,kA7,kB7,kD7,kE7,kF7, \ + k93,kB3,kD3,kE3, \ + k47,k66, \ + k67, \ + k87,k76,k86 \ +) { \ + { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \ + { k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \ + { k50, k51, k52, k53, k54, k55, k56, KC_NO }, \ + { k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO }, \ + { k80, k81, k82, k83, KC_NO ,KC_NO, k86, k87}, \ + { KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \ + { KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, k84, k85}, \ + { KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \ + { KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \ +} + + +/* 4y0 A 4y1 B 4y2 4y3 D 4y4 E 4y5 F 4y6 G 4y7 H 5y0 I 5y1 J 5y2 K 5y3 L 5y4 M 5y5 N 5y6 O 5y7 P */ + +/* + 0 1 2 3 4 5 6 7 8 9 A B C D E F + A B C D E F G H I J K L M N O P + 4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7 + r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 +0 PB0 21 c0 f6 f8 f7 5 4 3 2 1 =+ +1 PB1 22 c1 f3 f5 f4 t r e w q TAB +2 PB2 23 c2 ESC f2 f1 g f d s a CL +3 PB3 24 c3 f9 f11 f10 b v c x z LS UP DN [{ ]} +4 PB4 25 c4 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_ +5 PB5 26 c5 PB PGM KPD LA HM END y u i o p \ +6 PB6 27 c6 LC DEL BS RC ENT SP h j k l ;: '" +7 PB7 28 c7 RA PU PD n m ,< .> /? RS +*/ + + +#endif diff --git a/keyboards/kinesis/matrix.c b/keyboards/kinesis/matrix.c new file mode 100644 index 000000000..cb0d5ad7d --- /dev/null +++ b/keyboards/kinesis/matrix.c @@ -0,0 +1,228 @@ +/* +Copyright 2014 Warren Janssens <warren.janssens@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "led.h" +#include "config.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static uint8_t matrix[MATRIX_ROWS]; +static uint8_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_row(uint8_t row); +static void unselect_rows(void); +static void select_rows(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + //debug_enable = true; + + //dprint("matrix_init"); dprintln(); + // output high (leds) + DDRD = 0xFF; + PORTD = 0xFF; + + // output low (multiplexers) + DDRF = 0xFF; + PORTF = 0x00; + + // input with pullup (matrix) + DDRB = 0x00; + PORTB = 0xFF; + + // input with pullup (program and keypad buttons) + DDRC = 0x00; + PORTC = 0xFF; + + // initialize row and col + unselect_rows(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + +} + +uint8_t matrix_scan(void) +{ + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_rows(i); + uint8_t row = read_row(i); + if (matrix_debouncing[i] != row) { + matrix_debouncing[i] = row; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + matrix_scan_quantum(); + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static matrix_row_t read_row(uint8_t row) +{ + _delay_us(30); // without this wait read unstable value. + + //keypad and program buttons + if (row == 12) + { + return ~(PINC | 0b00111111); + } + return ~PINB; +} + +static void unselect_rows(void) +{ + // set A,B,C,G to 0 (F4 - F7) + PORTF &= 0x0F; +} + +static void select_rows(uint8_t row) +{ + // set A,B,C,G to row value + PORTF |= row << 4; +} + + +/* Row pin configuration +PF0 A +PF1 B +PF2 C +PF3 G 0 = U4, 1 = U5 + + 4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7 + r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 +PB0 21 c1 f6 f8 f7 5 4 3 2 1 =+ +PB1 22 c2 f3 f5 f4 t r e w q TAB +PB2 23 c3 ESC f2 f1 g f d s a CL +PB3 24 c4 f9 f11 f10 b v c x z LS UP DN [{ ]} +PB4 25 c5 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_ +PB5 26 c6 PB PGM KPD y u i o p \ +PB6 27 c7 LC DL BS RC EN SP h j k l ;: '" +PB7 28 c8 RA PU PD n m ,< .> /? RS + */ + + diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md new file mode 100644 index 000000000..a990f9cb9 --- /dev/null +++ b/keyboards/kinesis/readme.md @@ -0,0 +1,42 @@ +kinesis-advantage keyboard firmware +====================== + +## Kinesis specific information +This is a port of https://github.com/alvicstep/tmk_keyboard, +which is a fork of https://github.com/wjanssens/tmk_keyboard, +which is based on work from https://github.com/chrisandreae/keyboard-firmware + +If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. +I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. + +Not yet implemented: +- Kinesis EEProm reading or writing +- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7 + + + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile new file mode 100644 index 000000000..b9f07636b --- /dev/null +++ b/keyboards/lets_split/Makefile @@ -0,0 +1,78 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h new file mode 100644 index 000000000..ec99514aa --- /dev/null +++ b/keyboards/lets_split/config.h @@ -0,0 +1,97 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Wootpatoot +#define PRODUCT Lets Split +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { B5, B4, E6, D7 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } + +#define CATERINA_BOOTLOADER + +// #define USE_I2C + +// #define EE_HANDS + +#define I2C_MASTER_LEFT +// #define I2C_MASTER_RIGHT + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D4 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/eeprom-lefthand.eep b/keyboards/lets_split/eeprom-lefthand.eep new file mode 100644 index 000000000..a92200b12 --- /dev/null +++ b/keyboards/lets_split/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:080000000000000000000001F7
+:00000001FF
diff --git a/keyboards/lets_split/eeprom-righthand.eep b/keyboards/lets_split/eeprom-righthand.eep new file mode 100644 index 000000000..91a683170 --- /dev/null +++ b/keyboards/lets_split/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:080000000000000000000000F8
+:00000001FF
diff --git a/keyboards/lets_split/i2c.c b/keyboards/lets_split/i2c.c new file mode 100644 index 000000000..c72789403 --- /dev/null +++ b/keyboards/lets_split/i2c.c @@ -0,0 +1,159 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} diff --git a/keyboards/lets_split/i2c.h b/keyboards/lets_split/i2c.h new file mode 100644 index 000000000..08ce4b009 --- /dev/null +++ b/keyboards/lets_split/i2c.h @@ -0,0 +1,31 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + +#endif diff --git a/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png b/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png Binary files differnew file mode 100644 index 000000000..888294718 --- /dev/null +++ b/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png diff --git a/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png b/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png Binary files differnew file mode 100644 index 000000000..7621d38ed --- /dev/null +++ b/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c new file mode 100644 index 000000000..0d2d94b67 --- /dev/null +++ b/keyboards/lets_split/keymaps/default/keymap.c @@ -0,0 +1,214 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c new file mode 100644 index 000000000..574c116a7 --- /dev/null +++ b/keyboards/lets_split/lets_split.c @@ -0,0 +1,30 @@ +#include "lets_split.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h new file mode 100644 index 000000000..fe7ae0767 --- /dev/null +++ b/keyboards/lets_split/lets_split.h @@ -0,0 +1,25 @@ +#ifndef LETS_SPLIT_H +#define LETS_SPLIT_H + +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ + k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ + k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ + k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k40, k41, k42, k43, k44, k45 }, \ + { k50, k51, k52, k53, k54, k55 }, \ + { k60, k61, k62, k63, k64, k65 }, \ + { k70, k71, k72, k73, k74, k75 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/matrix.c b/keyboards/lets_split/matrix.c new file mode 100644 index 000000000..1d768c59b --- /dev/null +++ b/keyboards/lets_split/matrix.c @@ -0,0 +1,311 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "i2c.h" +#include "serial.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#ifndef USE_I2C +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + + matrix_scan_quantum(); + + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + for(int x = 0; x < MATRIX_COLS; x++) { + _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h new file mode 100644 index 000000000..09e219b7b --- /dev/null +++ b/keyboards/lets_split/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include <avr/pgmspace.h> + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t A0 = 18; +static const uint8_t A1 = 19; +static const uint8_t A2 = 20; +static const uint8_t A3 = 21; +static const uint8_t A4 = 22; +static const uint8_t A5 = 23; +static const uint8_t A6 = 24; // D4 +static const uint8_t A7 = 25; // D6 +static const uint8_t A8 = 26; // D8 +static const uint8_t A9 = 27; // D9 +static const uint8_t A10 = 28; // D10 +static const uint8_t A11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md new file mode 100644 index 000000000..73fdb0f78 --- /dev/null +++ b/keyboards/lets_split/readme.md @@ -0,0 +1,102 @@ +Let's Split +====== + +This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ + +Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 +based boards. + +Features +-------- + +Some features supported by the firmware: + +* Either half can connect to the computer via USB, or both halves can be used + independently. +* You only need 3 wires to connect the two halves. Two for VCC and GND and one + for serial communication. +* Optional support for I2C connection between the two halves if for some + reason you require a faster connection between the two halves. Note this + requires an extra wire between halves and pull-up resistors on the data lines. + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. +* 2 TRS sockets +* 1 TRS cable. + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- + +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Then wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + + + +The wiring for i2c: + + + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +Notes on Software Configuration +------------------------------- + +Configuring the firmware is similar to any other TMK project. One thing +to note is that `MATIX_ROWS` in `config.h` is the total number of rows between +the two halves, i.e. if your split keyboard has 4 rows in each half, then +`MATRIX_ROWS=8`. + +Also the current implementation assumes a maximum of 8 columns, but it would +not be very difficult to adapt it to support more if required. + + +Flashing +-------- + +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +make eeprom-left +``` +and similarly for right half +``` +make eeprom-right +``` + +After you have flashed the EEPROM for the first time, you then need to program +the flash memory: +``` +make program +``` +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout. Then if you connect the left +half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + diff --git a/keyboards/lets_split/serial.c b/keyboards/lets_split/serial.c new file mode 100644 index 000000000..f439c2f20 --- /dev/null +++ b/keyboards/lets_split/serial.c @@ -0,0 +1,225 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <stdbool.h> + +#include "serial.h" + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} diff --git a/keyboards/lets_split/serial.h b/keyboards/lets_split/serial.h new file mode 100644 index 000000000..15fe4db7b --- /dev/null +++ b/keyboards/lets_split/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include <stdbool.h> + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c new file mode 100644 index 000000000..65003a71a --- /dev/null +++ b/keyboards/lets_split/split_util.c @@ -0,0 +1,76 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "i2c.h" +#include "serial.h" +#include "keyboard.h" +#include "config.h" + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + #ifdef I2C_MASTER_RIGHT + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +void keyboard_slave_loop(void) { + matrix_init(); + + while (1) { + matrix_slave_scan(); + } +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); + + if (!has_usb()) { + keyboard_slave_loop(); + } +} diff --git a/keyboards/lets_split/split_util.h b/keyboards/lets_split/split_util.h new file mode 100644 index 000000000..6b896679c --- /dev/null +++ b/keyboards/lets_split/split_util.h @@ -0,0 +1,22 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +#endif diff --git a/keyboards/phantom/Makefile b/keyboards/phantom/Makefile new file mode 100644 index 000000000..3a71fd0ee --- /dev/null +++ b/keyboards/phantom/Makefile @@ -0,0 +1,74 @@ + + +SRC = led.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h new file mode 100644 index 000000000..983a1d73f --- /dev/null +++ b/keyboards/phantom/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER PHANTOM +#define PRODUCT PHANTOM RGB MOD +#define DESCRIPTION QMK keyboard firmware for PHANTOM TKL + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +// ROWS: Top to bottom, COLS: Left to right +/* Row pin configuration +*/ +#define MATRIX_ROW_PINS { B5, B4, B3, B2, B1, B0 } +/* Column pin configuration + */ +#define MATRIX_COL_PINS { D5, C7, C6, D4, D0, E6, F0, F1, F4, F5, F6, F7, D7, D6, D1, D2, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Underlight configuration + */ +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/phantom/keymaps/default/keymap.c b/keyboards/phantom/keymaps/default/keymap.c new file mode 100644 index 000000000..a4fc319ac --- /dev/null +++ b/keyboards/phantom/keymaps/default/keymap.c @@ -0,0 +1,102 @@ +#include "phantom.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| + * |-----------------------------------------------------------| |--------------| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| + * |-----------------------------------------------------------| |--------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn| + * |-----------------------------------------------------------| `--------------' + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| ,----. + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |-----------------------------------------------------------| ,-------------. + * |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig | + * `-----------------------------------------------------------' `-------------' + */ +[_BL] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | Reset | | | | | + * |-----------------------------------------------------------| |--------------| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| `--------------' + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------| ,----. + * | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | | + * |-----------------------------------------------------------| ,-------------. + * | | | | | | | | | | | | | + * `-----------------------------------------------------------' `-------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/phantom/led.c b/keyboards/phantom/led.c new file mode 100644 index 000000000..69dba7d40 --- /dev/null +++ b/keyboards/phantom/led.c @@ -0,0 +1,43 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<6); + DDRB |= (1<<7); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB |= (1<<6); + } else { + // Turn capslock off + PORTB &= ~(1<<6); + } + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { + // Turn scrolllock on + PORTB |= (1<<7); + } else { + // Turn scrolllock off + PORTB &= ~(1<<7); + } +} diff --git a/keyboards/phantom/phantom.c b/keyboards/phantom/phantom.c new file mode 100644 index 000000000..d53af491f --- /dev/null +++ b/keyboards/phantom/phantom.c @@ -0,0 +1,9 @@ +#include "phantom.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; diff --git a/keyboards/phantom/phantom.h b/keyboards/phantom/phantom.h new file mode 100644 index 000000000..420826bec --- /dev/null +++ b/keyboards/phantom/phantom.h @@ -0,0 +1,40 @@ +#ifndef PHANTOM_H +#define PHANTOM_H + +#include "quantum.h" + +/* Phantom matrix layout + * ,-----------------------------------------------------------------------------. + * |00 |02| 03| 04| 05| | 06| 07| 08| 09| | 0a|0b |0c |0d | |0e |0f |0g | + * |-----------------------------------------------------------| |--------------| + * | 01| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1d | |1e |1f |1g | + * |-----------------------------------------------------------| |--------------| + * |20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| | 2e | 2f | 2g | + * |-----------------------------------------------------------| `--------------' + * |30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| ,----. + * | 40 | 42| 43| 44| 45| 46| 47| 48| 49| 4a| 4b| 4d | | 4f | + * |-----------------------------------------------------------| ,-------------. + * | 50 | 51 | 52 | 57 |5a | 5b | 5c | 5d | | 5e| 5f | 5g | + * `-----------------------------------------------------------' `-------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \ + k01, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4f, \ + k50, k51, k52, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1d, k1e, k1f, k1g}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3d, k3d, k3d, k3d}, \ + {k40, k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4d, k4f, k4f, k4f}, \ + {k50, k51, k52, k57, k57, k57, k57, k57, k57, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g} \ +} + +#endif diff --git a/keyboards/phantom/pinout.jpg b/keyboards/phantom/pinout.jpg Binary files differnew file mode 100644 index 000000000..30b0b8bf4 --- /dev/null +++ b/keyboards/phantom/pinout.jpg diff --git a/keyboards/phantom/pinout.txt b/keyboards/phantom/pinout.txt new file mode 100644 index 000000000..36f044d15 --- /dev/null +++ b/keyboards/phantom/pinout.txt @@ -0,0 +1 @@ +For WS2812B LED strip support, connect DIN from strip to PE2 on Teensy (see reference image pinout.jpg)
\ No newline at end of file diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md new file mode 100644 index 000000000..190f738fa --- /dev/null +++ b/keyboards/phantom/readme.md @@ -0,0 +1,4 @@ +Phantom keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/planck/Makefile b/keyboards/planck/Makefile new file mode 100644 index 000000000..23944f92e --- /dev/null +++ b/keyboards/planck/Makefile @@ -0,0 +1,74 @@ + +SUBPROJECT_DEFAULT = rev4 + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h new file mode 100644 index 000000000..4dd1d22a9 --- /dev/null +++ b/keyboards/planck/config.h @@ -0,0 +1,88 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev3 + #include "rev3/config.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4/config.h" +#endif + +#endif diff --git a/keyboards/planck/keymaps/ab/Makefile b/keyboards/planck/keymaps/ab/Makefile new file mode 100644 index 000000000..44a030ba3 --- /dev/null +++ b/keyboards/planck/keymaps/ab/Makefile @@ -0,0 +1,63 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/ab/keyboard-layout.json b/keyboards/planck/keymaps/ab/keyboard-layout.json new file mode 100644 index 000000000..4e631a348 --- /dev/null +++ b/keyboards/planck/keymaps/ab/keyboard-layout.json @@ -0,0 +1,185 @@ +[ + { + "name": "AB's Practical Keymap for Planck", + "author": "Anand Babu Periasamy" + }, + [ + { + "fa": [ + 2, + 2, + 0, + 2 + ] + }, + "F1\n1\n\n!\n\n\n\n\n\nTab", + "F2\n2\n\n@\n\n\n\n\n\nQ", + "F3\n3\n\n#\n\n\n\n\n\nW", + "F4\n4\n\n$\n\n\n\n\n\nE", + "F5\n5\n\n%\n\n\n\n\n\nR", + "F6\n6\n\n^\n\n\n\n\n\nT", + "F7\n7\n\n&\n\n\n\n\n\nY", + "F8\n8\n\n*\n\n\n\n\n\nU", + "F9\n9\n\n(\n\n\n\n\n\nI", + "F10\n0\n\n)\n\n\n\n\n\nO", + "F11\n-\n\n_\n\n\n\n\n\nP", + "F12\n=\n\n+\n\n\n\n\n\n<i class=\"fa fa-chevron-circle-left\" aria-hidden=\"true\"></i>" + ], + [ + { + "a": 7, + "f": 3 + }, + "Ctrl", + { + "f": 3 + }, + "A", + { + "f": 3 + }, + "S", + { + "f": 3 + }, + "D", + { + "c": "#c4bcbc", + "a": 4, + "f": 3 + }, + "\n(\n\n\n\n\n\n\n\nF", + { + "c": "#cccccc", + "f": 3 + }, + "\n)\n\n\n\n\n\n\n\nG", + { + "f": 3 + }, + "\n{\n\n\n\n\n\n\n\nH", + { + "c": "#c4bcbc", + "f": 3 + }, + "\n}\n\n\n\n\n\n\n\nJ", + { + "c": "#cccccc", + "a": 7, + "f": 3 + }, + "K", + { + "f": 3 + }, + "L", + { + "a": 6, + "f": 3 + }, + ";\n\n:", + { + "a": 7, + "f": 3 + }, + "Enter" + ], + [ + { + "f": 3 + }, + "Shift", + { + "f": 3 + }, + "Z", + { + "f": 3 + }, + "X", + { + "f": 3 + }, + "C", + { + "a": 4, + "fa": [ + 0, + 2, + 0, + 2, + 0, + 0, + 0, + 0, + 0, + 2 + ] + }, + "\\\n[\n\n\n\n\n\n\n\nV", + "|\n]\n\n\n\n\n\n\n\nB", + "`\n'\n\n\n\n\n\n\n\nN", + "~\n\"\n\n\n\n\n\n\n\nM", + { + "a": 6 + }, + ",\n\n<", + ".\n\n>", + "/\n\n?", + { + "a": 7 + }, + "Shift\n\n\n\nEnter" + ], + [ + { + "a": 4, + "fa": [ + 2, + 2 + ] + }, + "<i class='fa fa-download'></i>\n<i class='fa fa-lightbulb-o'></i>\n\n\n\n\n\n\n\nCtrl", + "\n<i class=\"fa fa-search\" aria-hidden=\"true\"></i>\n\n\n\n\n\n\n\nEsc", + "\n<i class=\"fa fa-search-minus\" aria-hidden=\"true\"></i>\n\n\n\n\n\n\n\n<i class='fa fa-linux'></i>", + "\n<i class=\"fa fa-search-plus\" aria-hidden=\"true\"></i>\n\n\n\n\n\n\n\nAlt", + { + "a": 7, + "f": 3 + }, + "<i class='fa fa-sort-down'></i>", + { + "a": 4, + "fa": [ + 1, + 1 + ], + "w": 2 + }, + "PgUp\nPgDn\n\n\n\n\n\n\n\nSpace", + { + "a": 7, + "f": 3 + }, + "<i class='fa fa-sort-up'></i>", + { + "a": 4, + "fa": [ + 2 + ] + }, + "<i class=\"fa fa-undo\" aria-hidden=\"true\"></i>\n\n\n\n\n\n\n\n\n<i class=\"fa fa-long-arrow-left\" aria-hidden=\"true\"></i>", + { + "f": 3 + }, + "<i class='fa fa-volume-down'></i>\n\n\n\n\n\n\n\n\n<i class=\"fa fa-long-arrow-down\" aria-hidden=\"true\"></i>", + { + "f": 3 + }, + "<i class='fa fa-volume-up'></i>\n\n\n\n\n\n\n\n\n<i class=\"fa fa-long-arrow-up\" aria-hidden=\"true\"></i>", + { + "f": 3 + }, + "<i class='fa fa-volume-off'></i>\n\n\n\n\n\n\n\n\n<i class=\"fa fa-long-arrow-right\" aria-hidden=\"true\"></i>" + ] +]
\ No newline at end of file diff --git a/keyboards/planck/keymaps/ab/keyboard-layout.png b/keyboards/planck/keymaps/ab/keyboard-layout.png Binary files differnew file mode 100644 index 000000000..dcdbb726d --- /dev/null +++ b/keyboards/planck/keymaps/ab/keyboard-layout.png diff --git a/keyboards/planck/keymaps/ab/keyboard-photo.jpg b/keyboards/planck/keymaps/ab/keyboard-photo.jpg Binary files differnew file mode 100644 index 000000000..358cb6bca --- /dev/null +++ b/keyboards/planck/keymaps/ab/keyboard-photo.jpg diff --git a/keyboards/planck/keymaps/ab/keymap.c b/keyboards/planck/keymaps/ab/keymap.c new file mode 100644 index 000000000..8e1d28a65 --- /dev/null +++ b/keyboards/planck/keymaps/ab/keymap.c @@ -0,0 +1,132 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +extern keymap_config_t keymap_config; + +// Symbolic names for macro IDs. +#define _QWERTY 0 // QUERTY layer +#define _LOWER 1 // Lower layer +#define _RAISE 2 // Raise layer +#define _CUSTOM 3 // Custom layer (LOWER + RAISE) +#define _BL 4 // Backlight +#define _MOB 5 // Mobile# +#define _CUS1 6 // Custom macro 1 +#define _CUS2 7 // Custom macro 2 + +// Macro shortcuts. +#define QWERTY M(_LOWER) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define CUSTOM M(_CUSTOM) +#define BL M(_BL) +#define MOB M(_MOB) +#define CUS1 M(_CUS1) +#define CUS2 M(_CUS2) + +// Func macro definitions. +#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER +#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE +#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK) +#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift +#define ZM_NRM FUNC(4) // Zoom normal +#define ZM_IN FUNC(5) // Zoom out +#define ZM_OUT FUNC(6) // Zoom in +#define EM_UNDO FUNC(7) // Emacs Undo + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP), + [2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS), + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [4] = ACTION_MODS_KEY(MOD_LCTL, KC_0), + [5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), + [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS), + [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), + }; + +// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = { /* QWERTY */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_LOWER] = { /* LOWER */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {BL, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[_RAISE] = { /* RAISE */ + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, + {RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, EM_UNDO, KC_VOLD, KC_VOLU, KC_MUTE} +}, +[_CUSTOM] = { /* CUSTOM */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MOB, KC_TRNS, CUS1, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} +}; + +// Set a layer persistantly. +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Macro actions for each corresponding ID. +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _RAISE: // Raised layer. + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _LOWER: // Lowered layer. + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _BL: // Backlight + if (record->event.pressed) { + register_code(KC_RSFT); +#ifdef BACKLIGHT_ENABLE + backlight_step(); +#endif + } else { + unregister_code(KC_RSFT); + } + break; + case _MOB: // Your mobile# here. + return MACRODOWN(T(1), T(2), T(3), T(MINS), + T(1), T(2), T(3), T(MINS), + T(1), T(2), T(3), T(4), + END); + case _CUS1: // Your custom macro 1 + return MACRODOWN(T(E), T(M), T(A), T(C), T(S), T(SPC), END); + case _CUS2: // Your custom macro 2 + return MACRODOWN(T(L), T(S), T(SPC), T(MINS), T(L), T(ENT), END); + }; + return MACRO_NONE; +} diff --git a/keyboards/planck/keymaps/ab/readme.md b/keyboards/planck/keymaps/ab/readme.md new file mode 100644 index 000000000..d6280f074 --- /dev/null +++ b/keyboards/planck/keymaps/ab/readme.md @@ -0,0 +1,18 @@ +# Practical keymap for Planck Ortholinear 40% Mechanical Keyboard +A practical keymap that emulates standard QWERTY keyboard for Planck. Once you get comfortable with this keymap, you may fork and customize it for your own needs. + + + + +* Online keyboard layout editor: http://goo.gl/mlLAFZ + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=ab make dfu +``` +# Notes +* Simultaneous RAISE+LOWER enters CUSTOM layer. You may add your own macros and custom keys here. +* RAISE and LOWER also acts as PgUp and PgDn when tapped. +* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. +* Bracket keys are placed in the center of the keyboard for programmer's convenience. diff --git a/keyboards/planck/keymaps/alexey/Makefile b/keyboards/planck/keymaps/alexey/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/alexey/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/alexey/keymap.c b/keyboards/planck/keymaps/alexey/keymap.c new file mode 100644 index 000000000..f3cdf3d6e --- /dev/null +++ b/keyboards/planck/keymaps/alexey/keymap.c @@ -0,0 +1,51 @@ +#include "keymap.h" +#include "planck.h" +#include "backlight.h" + +#define _QW 0 +#define _LW 1 +#define _RS 2 + +// This layout tries to imitate the Atreus keyboard + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_LW)}, + {KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_TRNS}, + {M(0), KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_SPC, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT, KC_TRNS} +}, +[_RS] = { /* RAISE */ + {KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR, KC_TRNS}, + {KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS}, + {KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_EQL, KC_TRNS} +}, +[_LW] = { /* LOWER */ + {KC_TRNS, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_DELETE, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_TRNS, KC_F4, KC_F5, KC_F6, KC_F11, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_TRNS} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + backlight_step(); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + diff --git a/keyboards/planck/keymaps/angerthosenear/Makefile b/keyboards/planck/keymaps/angerthosenear/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/angerthosenear/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/angerthosenear/keymap.c b/keyboards/planck/keymaps/angerthosenear/keymap.c new file mode 100644 index 000000000..aa75a6771 --- /dev/null +++ b/keyboards/planck/keymaps/angerthosenear/keymap.c @@ -0,0 +1,39 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, + {KC_LCTL, KC_LGUI, KC_LALT, BL_STEP, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommodate for both spacebar wiring positions +}, +[1] = { /* WASD + NumPad */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_PMNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PAST, KC_PPLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PDOT, KC_PENT, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_SPC, KC_P0, FUNC(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_DEL}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; diff --git a/keyboards/planck/keymaps/austin/Makefile b/keyboards/planck/keymaps/austin/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/austin/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/austin/keymap.c b/keyboards/planck/keymaps/austin/keymap.c new file mode 100644 index 000000000..40f808654 --- /dev/null +++ b/keyboards/planck/keymaps/austin/keymap.c @@ -0,0 +1,39 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {BL_STEP, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LGUI, KC_LALT, KC_LCTL, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/basic/Makefile b/keyboards/planck/keymaps/basic/Makefile new file mode 100644 index 000000000..0c0632da0 --- /dev/null +++ b/keyboards/planck/keymaps/basic/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/basic/keymap.c b/keyboards/planck/keymaps/basic/keymap.c new file mode 100644 index 000000000..36a066e91 --- /dev/null +++ b/keyboards/planck/keymaps/basic/keymap.c @@ -0,0 +1,94 @@ +#include "planck.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[0] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_RSFT, KC_LCTL, KC_LALT, KC_LGUI, M(1), KC_SPC, KC_SPC, M(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Reset | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[1] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Reset | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[2] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 1: + if (record->event.pressed) { + layer_on(1); + } else { + layer_off(1); + } + break; + case 2: + if (record->event.pressed) { + layer_on(2); + } else { + layer_off(2); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/basic/readme.md b/keyboards/planck/keymaps/basic/readme.md new file mode 100644 index 000000000..3a4824b5b --- /dev/null +++ b/keyboards/planck/keymaps/basic/readme.md @@ -0,0 +1,2 @@ +# A more basic Planck Layout for copying + diff --git a/keyboards/planck/keymaps/bone2planck/Makefile b/keyboards/planck/keymaps/bone2planck/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/bone2planck/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c new file mode 100644 index 000000000..66cf9386d --- /dev/null +++ b/keyboards/planck/keymaps/bone2planck/keymap.c @@ -0,0 +1,156 @@ +#include "planck.h" +#ifdef BACKLIGHT_ENABLE +#include "backlight.h" +#endif +#include "keymap_german.h" + +#define _______ KC_TRNS + +/* This Layout tries to emulate the Bone2 Variant of Neo2, and is intended to be used with a German QWERTZ Softwarelayout. +It has "üäöß" as it is optimized for a mix of German & English. +My favourite features are the placement of the special characters often used for programming right on the home row +and the number & navigation block combo, so you never have to move your hands from their home position. + +Bone2 wiki page: http://wiki.neo-layout.org/wiki/Bone +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Bone2 +* ,-----------------------------------------------------------------------------------. +* | Q | J | D | U | A | X | P | H | L | M | W | ẞ | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* |M1/Tab| C | T | I | E | O | B | N | R | S | G |M1/Ent| //hold for M1, tap for Tab/Enter +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| F | V | Ü | Ä | Ö | Y | Z | , | . | K |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | M4 | M2 | Space | M2 | M4 | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ +[0] = { + { DE_Q, DE_J, DE_D, DE_U, DE_A, DE_X, DE_P, DE_H, DE_L, DE_M, DE_W, DE_SS }, + { LT(1,KC_TAB), DE_C, DE_T, DE_I, DE_E, DE_O, DE_B, DE_N, DE_R, DE_S, DE_G, LT(1,KC_ENT) }, + { KC_LSFT, DE_F, DE_V, DE_UE, DE_AE, DE_OE, DE_Y, DE_Z, DE_COMM, DE_DOT, DE_K, KC_LSFT }, + { KC_LGUI, KC_LCTL, KC_LALT, MO(4), MO(2), KC_SPC, KC_SPC, MO(2), MO(4), KC_NO, KC_RCTL, KC_ESC } +}, + +/* M1 Special Characters +very ergonomic placement for coding +* ,-----------------------------------------------------------------------------------. +* | ° | @ | _ | [ | ] | ^ | ! | < | > | = | & | ´ | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* |M1/Tab| \ | / | { | } | * | ? | ( | ) | - | : |M1/Ent| //hold for M1, tap for Tab/Enter +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| # | $ | | | ~ | € | + | % | " | ' | ; |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | M4 | M2 | Space | M2 | M4 | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ +[1] = { + { DE_RING, DE_AT, DE_UNDS, DE_LBRC, DE_RBRC, DE_CIRC, DE_EXLM, DE_LESS, DE_MORE, DE_EQL, DE_AMPR, DE_ACUT }, + { _______, DE_BSLS, DE_SLSH, DE_LCBR, DE_RCBR, DE_ASTR, DE_QST, DE_LPRN, DE_RPRN, DE_MINS, DE_COLN, _______ }, + { _______, DE_HASH, DE_DLR, DE_PIPE, DE_TILD, DE_EURO, DE_PLUS, DE_PERC, DE_DQOT, DE_QUOT, DE_SCLN, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } +}, + +/* Navigation & Number Blocks +very easy to get used to & intuituve placement +* ,-----------------------------------------------------------------------------------. +* | | PgUp | Bksp | Up | DEL | PgDn | | 7 | 8 | 9 | | | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* | Tab | Home | Lft | Down | Right| End | . | 4 | 5 | 6 | , | Enter| +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| | Tab | Ins | Enter| | 0 | 1 | 2 | 3 | ; |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | M3 | M2 | Space | M2 | M3 | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ +[2] = { + { KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_NO }, + { KC_TAB, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, DE_DOT, DE_4, DE_5, DE_6, DE_COMM, KC_ENT }, + { _______, KC_NO, KC_TAB, KC_INS, KC_ENT, KC_NO, DE_0, DE_1, DE_2, DE_3, DE_SCLN, _______ }, + { _______, _______, _______, MO(3), _______, _______, _______, _______, MO(3), _______, _______, _______ } +}, + +/* Flipped Navigation & Number Blocks for one handed use +accessed by sliding from M2 to M3 with thumb +* ,-----------------------------------------------------------------------------------. +* | | | 7 | 8 | 9 | | PgUp | Bksp | Up | DEL | PgDn | | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* | Tab | . | 4 | 5 | 6 | , | Home | Left | Down | Right| End | Enter| +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| 0 | 1 | 2 | 3 | ; | | Tab | Ins | Enter| |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | M3 | | Space | | M3 | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ + +[3] = { + { KC_NO, KC_NO, DE_7, DE_8, DE_9, KC_NO, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_NO }, + { _______, DE_DOT, DE_4, DE_5, DE_6, DE_COMM, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______ }, + { _______, DE_0, DE_1, DE_2, DE_3, DE_SCLN, KC_NO, KC_TAB, KC_INS, KC_ENT, KC_NO, _______ }, + { _______, _______, _______, _______, KC_NO, _______, _______, KC_NO, _______, _______, _______, _______ } +}, + + +/* Function & Media Keys +slide from m4 to m5 to access flipped version +* ,-----------------------------------------------------------------------------------. +* | | | Print|Scroll|Pause | | | F7 | F8 | F9 | F12 | | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* | | | Mute | Vol- | Vol+ | | ³ | F4 | F5 | F6 | F11 | | +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| | Prev | Play | Next | | ² | F1 | F2 | F3 | F10 |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | M4 | M5 | Space | M5 | M4 | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ +[4] = { + { KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_F12, KC_NO }, + { KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, DE_SQ3, KC_F4, KC_F5, KC_F6, KC_F11, KC_NO }, + { _______, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, DE_SQ2, KC_F1, KC_F2, KC_F3, KC_F10, _______ }, + { _______, _______, _______, _______, MO(5), _______, _______, MO(5), _______, _______, _______, _______ } +}, + + +/* flipped Function & Media Keys +* ,-----------------------------------------------------------------------------------. +* | | | F7 | F8 | F9 | | | Print|Scroll| Pause| | | +* |------+------+------+------+------+-------------+------+------+------+------+------| +* | | ³ | F4 | F5 | F6 | | | Mute | Vol- | Vol+ | | | +* |------+------+------+------+------+------|------+------+------+------+------+------| +* | Shift| ² | F1 | F2 | F3 | | | Prev | Play | Next | |Shift | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | GUI | Ctrl | Alt | | M5 | Space | M5 | | | Ctrl | Esc | +* `-----------------------------------------------------------------------------------' +*/ +[5] = { + { KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NO }, + { KC_NO, DE_SQ3, KC_F4, KC_F5, KC_F6, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO }, + { _______, DE_SQ2, KC_F1, KC_F2, KC_F3, KC_NO, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, _______ }, + { _______, _______, _______, KC_NO, _______, _______, _______, _______, KC_NO, _______, _______, _______ } +} +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); +#ifdef BACKLIGHT_ENABLE + backlight_step(); +#endif + } + else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/brandon/Makefile b/keyboards/planck/keymaps/brandon/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/brandon/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/brandon/keymap.c b/keyboards/planck/keymaps/brandon/keymap.c new file mode 100644 index 000000000..2b89f86db --- /dev/null +++ b/keyboards/planck/keymaps/brandon/keymap.c @@ -0,0 +1,134 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _TK 2 +#define _LW 3 +#define _RS 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ +/* MIT Layout (QWERTY layer) + * + * ,-----------------------------------------------------------------------. + * | esc | q | w | e | r | t | y | u | i | o | p | bspc| + * |-----------------------------------------------------------------------| + * | tab | a | s | d | f | g | h | j | k | l | ; | ' | + * |-----------------------------------------------------------------------| + * |shift| z | x | c | v | b | n | m | , | . | / |enter| + * |-----------------------------------------------------------------------| + * | ctl | alt | win | TK |lower| spc |raise|left |down | up |right| + * `-----------------------------------------------------------------------' + */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_LSFT, KC_ENT) }, + {KC_LCTL, KC_LALT, KC_LGUI, TG(_TK), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_CM] = { /* Colemak */ +/* MIT Layout (Colemak layer) + * + * ,-----------------------------------------------------------------------. + * | esc | q | w | f | p | g | j | l | u | y | ; | bspc| + * |-----------------------------------------------------------------------| + * | tab | a | r | s | t | d | h | n | e | i | o | ' | + * |-----------------------------------------------------------------------| + * |shift| z | x | c | v | b | k | m | , | . | / |enter| + * |-----------------------------------------------------------------------| + * | ctl | alt | win | TK |lower| spc |raise|left |down | up |right| + * `-----------------------------------------------------------------------' + */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_LSFT, KC_ENT)}, + {KC_LCTL, KC_LALT, KC_LGUI, TG(_TK), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ +/* MIT Layout (RAISE layer) + * + * ,-----------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | bspc| + * |-----------------------------------------------------------------------| + * | tab | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |-----------------------------------------------------------------------| + * |shift| F7 | F8 | F9 | F10 | F11 | F12 | QW | CM | BL | RST |enter| + * |-----------------------------------------------------------------------| + * | ctl | alt | win | del |lower| spc |raise|next |vold |volu |PLAY | + * `-----------------------------------------------------------------------' + */ + + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), M(0), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ +/* MIT Layout (Colemak layer) + * + * ,-----------------------------------------------------------------------. + * | esc | q | w | f | p | g | j | l | u | y | ; | bspc| + * |-----------------------------------------------------------------------| + * | tab | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |-----------------------------------------------------------------------| + * |shift| F7 | F8 | F9 | F10 | F11 | F12 | QW | CM | BL | RST |enter| + * |-----------------------------------------------------------------------| + * | ctl | alt | win | TK |lower| spc |raise|next |vold |volu |PLAY | + * `-----------------------------------------------------------------------' + */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), M(0), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_TK] = { /* Ten Key*/ +/* MIT Layout (Ten Key layer) + * + * ,-----------------------------------------------------------------------. + * | esc | F9 | F10 | F11 | F12 | PGUP| % | / | 7 | 8 | 9 | bspc| + * |-----------------------------------------------------------------------| + * | tab | F5 | F6 | F7 | F8 | PGDN| HOME| * | 4 | 5 | 6 | \ | + * |-----------------------------------------------------------------------| + * |shift| F1 | F2 | F3 | F4 | DEL | END | 0 | 1 | 2 | 3 |enter| + * |-----------------------------------------------------------------------| + * | ctl | alt | win | TK |lower| spc |raise|left |down | up |right| + * `-----------------------------------------------------------------------' + */ + {KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_PERC, KC_SLSH, KC_7, KC_8, KC_9, KC_BSPC}, + {KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_HOME, KC_ASTR, KC_4, KC_5, KC_6, KC_PIPE}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_END, KC_0, KC_1, KC_2, KC_3, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +} + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/callum/Makefile b/keyboards/planck/keymaps/callum/Makefile new file mode 100644 index 000000000..1d76966a6 --- /dev/null +++ b/keyboards/planck/keymaps/callum/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c new file mode 100644 index 000000000..a747dcb15 --- /dev/null +++ b/keyboards/planck/keymaps/callum/keymap.c @@ -0,0 +1,138 @@ +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BASE 0 +#define _MOVE 1 +#define _SYMB 2 +#define _FUNC 3 + +enum planck_keycodes { + BASE = SAFE_RANGE, + MOVE, + SYMB, + FUNC +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* BASE + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | - | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Bksp | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Func | GUI | Alt | Ctrl | Symb |Enter |Space | Move | GUI | Alt | Ctrl |Caps | + * `-----------------------------------------------------------------------------------' + */ +[_BASE] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {FUNC, KC_LGUI, KC_LALT, KC_LCTL, SYMB, KC_ENT, KC_SPC, MOVE, KC_RGUI, KC_RALT, KC_RCTL, KC_CAPS} +}, + +/* MOVE + * ,-----------------------------------------------------------------------------------. + * | Esc | | Home | Up | End | | | Home | Up | End | | Esc | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | | Left | Down |Right | | | Left | Down |Right | | Del | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | |Pg Up |Pg Dn | | |Pg Dn |Pg Up | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_MOVE] = { + {KC_ESC, _______, KC_HOME, KC_UP, KC_END, _______, _______, KC_HOME, KC_UP, KC_END, _______, KC_ESC}, + {KC_DEL, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_DEL}, + {_______, _______, _______, KC_PGUP, KC_PGDN, _______, _______, KC_PGDN, KC_PGUP, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* SYMB + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Esc | + * |-----------------------------------------------------------------------------------. + * | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | ~ | | | + | [ | { | } | ] | = | \ | ` | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_SYMB] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_ESC }, + {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {_______, KC_TILD, KC_PIPE, KC_PLUS, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_EQL, KC_BSLS, KC_GRV, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* FUNC + * ,-----------------------------------------------------------------------------------. + * | F12 | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | + * |-----------------------------------------------------------------------------------. + * | | Play | Prev | Next | BL+ | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | Mute | Vol- | Vol+ | BL- | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | |Reset | + * `-----------------------------------------------------------------------------------' + */ +[_FUNC] = { + {KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 }, + {_______, KC_MPLY, KC_MPRV, KC_MNXT, KC_PAUS, _______, _______, _______, _______, _______, _______, _______}, + {_______, KC_MUTE, KC_VOLD, KC_VOLU, KC_SLCK, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET } +} + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MOVE: + if (record->event.pressed) { + layer_on(_MOVE); + update_tri_layer(_MOVE, _SYMB, _FUNC); + } else { + layer_off(_MOVE); + update_tri_layer(_MOVE, _SYMB, _FUNC); + } + return false; + break; + case SYMB: + if (record->event.pressed) { + layer_on(_SYMB); + update_tri_layer(_MOVE, _SYMB, _FUNC); + } else { + layer_off(_SYMB); + update_tri_layer(_MOVE, _SYMB, _FUNC); + } + return false; + break; + case FUNC: + if (record->event.pressed) { + layer_on(_FUNC); + } else { + layer_off(_FUNC); + } + return false; + break; + } + return true; +} diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md new file mode 100644 index 000000000..d4f3449f1 --- /dev/null +++ b/keyboards/planck/keymaps/callum/readme.md @@ -0,0 +1,48 @@ +# callum’s planck layout + +This is a layout for the grid planck, built with a few ideals in mind. These ideals are just my opinion mind! The great thing about *qmk* is that we can all afford to have different opinions about what makes a good layout: + +- Minimal response times should be maintained. i.e. keys that react differently depending on whether they are tapped or held, keys that react differently if they are double tapped, etc. should be avoided --- since they inevitably send their keycode later than a normal key, interrupting the immediate feedback from the screen. Therefore we restrict ourselves to chording. +- The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible. +- There should be two of every modifier (one on each side), since otherwise certain long key combinations become hard to make. +- Backspace should be in the “capslock position” as God intended. +- The keyboard should be usable without any firmware changes on any operating system. In my case that means it should work on *Windows* and *Linux* without any software modifications, while I can change the behaviour slightly on *macOS* in software since that’s my home OS. The images reflect the intended use on *macOS* **after** minor software tweaks; which will be noted. + +We have four layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster etc, a `SYMB` layer, with numbers and symbols; and a `FUNC` layer, with function keys and media keys. + +## The `BASE` layer + + +This is the default layer; in [colemak](https://colemak.com). `esc` and `del` are conspicuously absent but are especially easy to reach from either of the other main layers (see below). The `backspace` location is standard colemak. The `caps` key is still on the `BASE` layer but only because I don’t really use the bottom corners so there’s nothing else I would rather put there. Having `enter` on a thumb means I can still have `quote` immediately to the right of `O`, something that would have annoyed me endlessly otherwise. `minus` is in the upper right because I had an extra space and it’s probably my next most used key that didn’t yet have a home. + +The `MOVE` and `SYMB` layers are reached by holding down the `move` and `symb` keys respectively. The `FUNC` layer is reached by holding down both the `move` and `symb` keys simultaneosly, *or* by holding down the `fn` key. The intended use is that whenever both hands are on the keyboard, the former method is used, and the latter is only used when, for example, reaching over to the keyboard with one hand to access the media controls. + +The `ctrl`, `alt`, `cmd` cluster is asymmetric around the centre so that at least one of each of the modifiers can be reached with the thumbs. The intended use is to always hit the left `cmd` and the right `ctrl`, unless an awkward key combination dictates otherwise. + +In firmware `ctrl` and `cmd`/`GUI` are swapped with respect to the image above --- I swap them to the illustrated location when using *macOS* and leave them be for *Windows* and *Linux*. (so that `cmd-z,x,c,v,...` becomes `ctrl-z,x,c,v,...` saving me some confusion) + +## The `MOVE` layer + + +This is fairly self explanatory. I almost exclusively use the right hand cluster so that movement is a one handed affair, but the left hand cluster is there if it’s needed. + +On *macOS* I recommend using [Karabiner](https://pqrs.org/osx/karabiner/) and ticking *Use PC Style Home/End #2* and *Use PC Style PageUp/PageDown* so that `home` and `end` jump you to the beginning and end of the line respectively and so that `pg up` and `pg dn` move the cursor instead of just scrolling. + +None of the modifiers are overwritten so that `shift-alt-arrows` etc work as expected. + +## The `SYMB` layer + + +The symbol layer has all the numbers and their usual corresponding symbols in the first two rows, with the symbols on the home row since I use them more frequently than the numbers. The third row contains all the remaining symbols, with brackets in the centre; then normally shifted symbols to the left, and non shifted to the right, in order of most to least used. + +`esc` and `del` are repeated here since I wanted to be able to reach either, one handed, with either hand. + +Again none of the modifiers are overwritten so that shortcuts involving numbers or symbols work as expected. + +## The `FUNC` layer + + +The only thing of note here is that `bl+` and `bl-` are short for *backlight up* and *backlight down* respectively, and in firmware are actually `KC_PAUS` and `KC_SLCK` respectively, since *macOS* interprets these as the backlight keys. + +## Other changes from the default +I have LEDs and sound disabled, simply because I have no need of them.
\ No newline at end of file diff --git a/keyboards/planck/keymaps/cbbrowne/Makefile b/keyboards/planck/keymaps/cbbrowne/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/cbbrowne/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h new file mode 100644 index 000000000..2d3df59bd --- /dev/null +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* cbbrowne user configuration */ + +#define randadd 53 +#define randmul 181 +#define randmod 167 + +#endif + + + diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c new file mode 100644 index 000000000..14a5be170 --- /dev/null +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -0,0 +1,173 @@ +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif +#include "config.h" +#include "quantum.h" + +/* Each layer is given a name to aid in readability, which is then + used in the keymap matrix below. The underscores do not denote + anything - you can have a layer called STUFF or any other name. + + Layer names don't all need to be of the same length, obviously, and + you could also skip them entirely and just use numbers, though that + means needing to manage the numbers. + + It is preferable to keep the symbols short so that a line worth of + key mappings fits compactly onto a line of code. */ + +/* This was originally based on planck/keymaps/default/default.c, and + then cbbrowne has revised things */ + +/* Things I did not like about the default mapping + + - I found control too hard to get to. I use it more than Tab, so + switched it there. + - Having dash on [lower-j] is a bit nonintuitive, but may be OK + - I'll bet I should switch ESC/TAB + - I'm suspicious that I want to shift M(0) from [4][1] to [4][2], + and shift ESC off the first column so KC_LCTL and KC_LALT can + be on the first column. + - I needed to swap ' and ENTER + + - All of the above are done :-) + + - Dropped out support for Dvorak and friends. They aren't + improvements to me +*/ + + +/* Some interesting things implemented + + - There is a macro that writes out "cbbrowne" to show that I could + - There is a (somewhat cruddy) linear congruential random number + generator. + - I would like to be seeding it with clock info to make it look + more random + - There are two macros that use the random number generators + - one, M_RANDDIGIT, generates a random digit based on state + of the random number generator + - the other, M_RANDLETTER, generates a random letter based on state + of the random number generator + - in both, note the use of register_code()/unregister_code() + to indicate the desired key + - I do indeed want a sweet number pad! +*/ + +/* Other things to do... + + - Need to think about what zsh and readline actions I use lots + - Ought to ensure that Control-Alt-Delete is convenient enough + - How about Alt-F1 thru Alt-F8? + - What's the keystroke to get from X to console these days? + - A layer for doing console switching would not be a bad idea +*/ + +enum layers { + _QW = 0, /* Qwerty mapping */ + _LW, /* Lower layer, where top line has symbols !@#$%^&*() */ + _RS, /* Raised layer, where top line has digits 1234567890 */ + _KP, /* Key pad */ +}; + +enum macro_id { + M_LED = 0, + M_USERNAME, + M_RANDDIGIT, + M_RANDLETTER, + M_VERSION +}; + +/* Note that Planck has dimensions 4 rows x 12 columns */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, + {KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, + {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_KP] = { /* Key Pad */ + {KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, + {KC_LCTL, M(M_RANDDIGIT), KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE}, + {KC_LSFT, M(M_RANDLETTER), KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER}, + {BL_STEP, M(M_LED), KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT} +} +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +/* This bit of logic seeds a wee linear congruential random number generator */ +/* lots of prime numbers everywhere... */ +static uint16_t random_value = 157; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + uint8_t clockbyte=0; + clockbyte = TCNT1 % 256; + uint8_t rval; + // MACRODOWN only works in this function + switch(id) { + case M_LED: + if (record->event.pressed) { + register_code(KC_RSFT); +#ifdef BACKLIGHT_ENABLE + backlight_step(); +#endif + } else { + unregister_code(KC_RSFT); + } + break; + case M_USERNAME: + if (record->event.pressed) { + SEND_STRING("cbbrowne"); + } + break; + case M_VERSION: + if (record->event.pressed) { + SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP "@" QMK_VERSION "@" QMK_BUILDDATE); + } + break; + case M_RANDDIGIT: + /* Generate, based on random number generator, a keystroke for + a numeric digit chosen at random */ + random_value = ((random_value + randadd) * randmul) % randmod; + if (record->event.pressed) { + /* Here, we mix the LCRNG with low bits from one of the system + clocks via XOR in the theory that this may be more random + than either separately */ + rval = (random_value ^ clockbyte) % 10; + /* Note that KC_1 thru KC_0 are a contiguous range */ + register_code (KC_1 + rval); + unregister_code (KC_1 + rval); + } + break; + case M_RANDLETTER: + /* Generate, based on random number generator, a keystroke for + a letter chosen at random */ + /* Here, we mix the LCRNG with low bits from one of the system + clocks via XOR in the theory that this may be more random + than either separately */ + random_value = ((random_value + randadd) * randmul) % randmod; + if (record->event.pressed) { + rval = (random_value ^ clockbyte) % 26; + register_code (KC_A + rval); + unregister_code (KC_A + rval); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/cbbrowne/readme.md b/keyboards/planck/keymaps/cbbrowne/readme.md new file mode 100644 index 000000000..c676dd2c1 --- /dev/null +++ b/keyboards/planck/keymaps/cbbrowne/readme.md @@ -0,0 +1,64 @@ +cbbrowne custom keyboard +============================== + +Due to cbbrowne@acm.org +Christopher Browne + +This was originally based on the default keyboard map, but I have been +doing sundry experimentation: + +1. Experiments +---------------------------------------- + + * To figure things out about the toolset + * I'm an Emacs guy, so will be needing a fair bit of tuning + * It made sense to mess around some with keyboard maps. + - I tried added Workman alongside Dvorak and Colemak + - Boy, oh boy, these don't help!!! + - I have done 30 years of learning of Emacs key mappings, and + these alternative keyboards massively mess me up + - I added a keypad, originally based on keymaps/numpad.c, but + mighty substantially revised, as that one seems to be rotated 90 + degrees from usual conventions for number pads + * The keypad layer also includes some sample "hacks" of cool things, + all using actions attached in using the function action_get_macro() + - Key [1][2] aka "q" types out my name, cbbrowne, as a fun example + of a key generating a bunch of keystrokes. The keystroke is + sufficiently inconvenient that it isn't terribly practical for me + to use it, but hey, it shows how others might use this facility + in a more useful context. + - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random + - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random + - Key [1][3] aka "e" spits out the keymap version number + +2. Some code structure ideas +--------------------------------------------------- + + Each layer is given a name to aid in readability, which is then + used in the keymap matrix below. The underscores do not denote + anything - you can have a layer called STUFF or any other name. + + Layer names don't all need to be of the same length, obviously, and + you could also skip them entirely and just use numbers, though that + means needing to manage the numbers. + + It is preferable to keep the symbols short so that a line worth of + key mappings fits compactly onto a line of code. It might be an + interesting idea to express the maps rotated 90%, so that you + only need to fit 4 symbols onto each line, rather than 12. + + I used enums to manage layer IDs and macro IDs so that I don't need + to care (beyond "start at 0", and arguably that's not needed) about + their values. + +3. Things I did not like about the default mapping +--------------------------------------------------------- + + * I found control too hard to get to. I use it more than Tab, so + switched it there. + * Having dash on [lower-j] is a bit nonintuitive, but may be OK + * I switched ESC/TAB/M(0) around + * I'm suspicious that I want to shift M(0) from [4][1] to [4][2], + and shift ESC off the first column so KC_LCTL and KC_LALT can + be on the first column. + * I needed to swap ' and ENTER diff --git a/keyboards/planck/keymaps/charlie/Makefile b/keyboards/planck/keymaps/charlie/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/charlie/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/charlie/keymap.c b/keyboards/planck/keymaps/charlie/keymap.c new file mode 100644 index 000000000..966c60d20 --- /dev/null +++ b/keyboards/planck/keymaps/charlie/keymap.c @@ -0,0 +1,54 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Native */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, FUNC(2)}, + {KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_TAB, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_DEL, KC_LCTL, KC_NO, KC_LSFT, KC_LALT, KC_SPC, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + [1] = { /* QWERTY->PHOTOSHOP */ + {KC_DELETE, KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, FUNC(1)}, + {KC_O, KC_G, KC_S, KC_U, KC_T, FUNC(27), KC_F21, KC_F10, KC_F11, KC_F7, KC_F8, KC_F9}, + {KC_TAB, FUNC(4), FUNC(5), FUNC(6), KC_F1, FUNC(7), KC_F18, KC_F19, KC_F23, KC_F20, KC_F22, FUNC(9)}, + {KC_COMM, KC_DOT, KC_R, FUNC(11), FUNC(3), KC_SPC, FUNC(12), KC_F2, FUNC(8), KC_F3, KC_F14} + }, + [2] = { /* 2: FUNC(3 PHOTOSHOP */ + {KC_ESC, FUNC(25), FUNC(26), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FUNC(19), FUNC(20), FUNC(21)}, + {KC_C, KC_NO, FUNC(22), FUNC(5), KC_NO, FUNC(23), KC_NO, KC_NO, KC_NO, KC_NO, FUNC(13), KC_NO}, + {FUNC(14), FUNC(15), FUNC(16), FUNC(17), FUNC(3), KC_SPC, FUNC(18), KC_NO, KC_NO, KC_F24, KC_NO} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout + [2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets + [3] = ACTION_LAYER_MOMENTARY(2), // Photoshop function layer + + [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK + [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse + [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M), // marquee select + [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC), // fill + [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X), // warp + [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12), // merge all new layer + [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), // zoom out + [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H), // RBG sliders + [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S), // save + [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5), // layer mask from transparancy + [14] = ACTION_MODS_KEY(MOD_LCTL, KC_F2), // stroke + [15] = ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_F2), // stroke layer + [16] = ACTION_MODS_KEY(MOD_LCTL, KC_0), // zoom 0 + [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H), // HSV sliders + [18] = ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_S), // save as + [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7), // gaussian blur + [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8), // motion blur + [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X), // liquify filter + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // prev layer blending + [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_BSPC), // KC_NOrmal layer blending + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // next layer blending + [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z), // step back + [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y), // step forward + [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R), // rasterize + +}; diff --git a/keyboards/planck/keymaps/daniel/Makefile b/keyboards/planck/keymaps/daniel/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/daniel/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/daniel/keymap.c b/keyboards/planck/keymaps/daniel/keymap.c new file mode 100644 index 000000000..3054d7974 --- /dev/null +++ b/keyboards/planck/keymaps/daniel/keymap.c @@ -0,0 +1,37 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {FUNC(3), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* RAISE */ + {KC_GRV, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_EQL}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, S(KC_MINS), KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[2] = { /* LOWER */ + {S(KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, S(KC_EQL)}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ENT}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +} +}; + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(2), // to LOWER + [3] = ACTION_LAYER_MOMENTARY(3) // to LOWER +}; diff --git a/keyboards/planck/keymaps/david/Makefile b/keyboards/planck/keymaps/david/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/david/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/david/keymap.c b/keyboards/planck/keymaps/david/keymap.c new file mode 100644 index 000000000..d8a46aa83 --- /dev/null +++ b/keyboards/planck/keymaps/david/keymap.c @@ -0,0 +1,38 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_ENT, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {M(10), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; diff --git a/keyboards/planck/keymaps/default/Makefile b/keyboards/planck/keymaps/default/Makefile new file mode 100644 index 000000000..0f4953888 --- /dev/null +++ b/keyboards/planck/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c new file mode 100644 index 000000000..5f71ae7d1 --- /dev/null +++ b/keyboards/planck/keymaps/default/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/default/readme.md b/keyboards/planck/keymaps/default/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/planck/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/planck/keymaps/dzobert/Makefile b/keyboards/planck/keymaps/dzobert/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/dzobert/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/dzobert/keymap.c b/keyboards/planck/keymaps/dzobert/keymap.c new file mode 100644 index 000000000..365649ed8 --- /dev/null +++ b/keyboards/planck/keymaps/dzobert/keymap.c @@ -0,0 +1,38 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TAB}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSPC}, + {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN4, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_TAB}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_BSPC}, + {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_DEL}, + {KC_TRNS, KC_GRV, KC_MINS, KC_EQL, KC_QUOT, S(KC_QUOT), S(KC_LBRC), S(KC_RBRC), KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_HOME, KC_PGUP, KC_PGDN, KC_END} +}, +[3] = { /* LOWER */ + {KC_POWER,KC_PSCR, KC_SLCK, KC_PAUSE, KC_NLCK, KC_EXECUTE, KC_MENU, KC_APP, KC_7, KC_8, KC_9, KC_KP_SLASH}, + {KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_CAPS, KC_CANCEL, KC_UNDO, KC_AGAIN, KC_4, KC_5, KC_6, KC_KP_ASTERISK}, + {KC_TRNS, KC_INSERT,KC_CUT, KC_COPY, KC_PASTE, KC_BSLS, KC_9, KC_0, KC_1, KC_2, KC_3, KC_KP_MINUS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_KP_DOT, KC_KP_ENTER, KC_KP_PLUS} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; diff --git a/keyboards/planck/keymaps/experimental/Makefile b/keyboards/planck/keymaps/experimental/Makefile new file mode 100644 index 000000000..877c4aed0 --- /dev/null +++ b/keyboards/planck/keymaps/experimental/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h new file mode 100644 index 000000000..52acd1905 --- /dev/null +++ b/keyboards/planck/keymaps/experimental/config.h @@ -0,0 +1,17 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define LEADER_TIMEOUT 300 +#define BACKLIGHT_BREATHING + + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#endif diff --git a/keyboards/planck/keymaps/experimental/keymap.c b/keyboards/planck/keymaps/experimental/keymap.c new file mode 100644 index 000000000..d9303fcae --- /dev/null +++ b/keyboards/planck/keymaps/experimental/keymap.c @@ -0,0 +1,431 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 10 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}, + {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL} +}, + +/* Qwerty + ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M |, | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {KC_LEAD, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUHS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + return false; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + return false; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + #ifdef BACKLIGHT_ENABLE + breathing_speed_set(2); + breathing_pulse(); + #endif + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + #ifdef BACKLIGHT_ENABLE + breathing_speed_set(2); + breathing_pulse(); + #endif + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + return false; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + return false; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + break; + return false; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + break; + return false; + + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + return false; + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + return false; + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + return false; + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + return false; + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + return false; + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + return false; + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + return false; + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + return false; + break; + + + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_ONE_KEY (KC_R) { + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + tap_random_base64(); + } + SEQ_ONE_KEY (KC_V) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + SEQ_ONE_KEY(KC_F) { + SEND_STRING("if yes\n\tpeanut butter\nelse\n\trice snacks"); + } + SEQ_TWO_KEYS(KC_A, KC_S) { + register_code(KC_H); + unregister_code(KC_H); + } + SEQ_THREE_KEYS(KC_A, KC_S, KC_D) { + register_code(KC_LGUI); + register_code(KC_S); + unregister_code(KC_S); + unregister_code(KC_LGUI); + } + } +} diff --git a/keyboards/planck/keymaps/experimental/readme.md b/keyboards/planck/keymaps/experimental/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/planck/keymaps/experimental/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/planck/keymaps/gabriel/Makefile b/keyboards/planck/keymaps/gabriel/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/gabriel/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/gabriel/keymap.c b/keyboards/planck/keymaps/gabriel/keymap.c new file mode 100644 index 000000000..805484488 --- /dev/null +++ b/keyboards/planck/keymaps/gabriel/keymap.c @@ -0,0 +1,108 @@ +#include "planck.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _LW 1 +#define _RS 2 +#define _FN 3 + +// This a slightly modified 'default' keymap that's closer to the Mac keyboard layout. I like the position +// of 'esc' and 'tab' better this way. I also got rid of the backlighting control key and the dvorak and +// colemak layers. I added an 'fn' layer that makes the 'bspc' a forward delete (like on OSX). +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* MIT Layout (QWERTY layer) + * + * ,-----------------------------------------------------------------------. + * | esc | q | w | e | r | t | y | u | i | o | p | bspc| + * |-----------------------------------------------------------------------| + * | tab | a | s | d | f | g | h | j | k | l | ; | ' | + * |-----------------------------------------------------------------------| + * |shift| z | x | c | v | b | n | m | , | . | / |enter| + * |-----------------------------------------------------------------------| + * | fn | ctl | alt | cmd |lower| spc |raise|left |down | up |right| + * `-----------------------------------------------------------------------' + */ +[_QW] = { /* QWERTY */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {MO(_FN), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +/* MIT Layout (Raised layer) + * + * ,-----------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |-----------------------------------------------------------------------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | | | + * |-----------------------------------------------------------------------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +/* MIT Layout (Lowered layer) + * + * ,-----------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |-----------------------------------------------------------------------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | \ | + * |-----------------------------------------------------------------------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LCBR, KC_RCBR, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +/* MIT Layout (FN layer) + * + * ,-----------------------------------------------------------------------. + * | | | | | | | | | | | | del | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | |home |pgdn |pgup | end | + * `-----------------------------------------------------------------------' + */ +[_FN] = { /* FUNCTION */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DELT}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + backlight_step(); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/jacob/Keyboard Layout.PNG b/keyboards/planck/keymaps/jacob/Keyboard Layout.PNG Binary files differnew file mode 100644 index 000000000..40f0b8942 --- /dev/null +++ b/keyboards/planck/keymaps/jacob/Keyboard Layout.PNG diff --git a/keyboards/planck/keymaps/jacob/Makefile b/keyboards/planck/keymaps/jacob/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/jacob/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/jacob/keymap.c b/keyboards/planck/keymaps/jacob/keymap.c new file mode 100644 index 000000000..5e6e8498e --- /dev/null +++ b/keyboards/planck/keymaps/jacob/keymap.c @@ -0,0 +1,56 @@ +#include "planck.h" +#include "action_layer.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +//Simple Keymap where CTRL, WINKEY, and ALT keys are placed in a more familiar location for Windows users. +//Focus of this particular keymap is to enable easy transition from more traditional keyboards to OLKB Planck. + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +#define _QW 0 +#define _LW 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_RSFT, KC_ENT)}, + {KC_LCTL, KC_LGUI, KC_LALT, M(0), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + }, + [_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + }, + [_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/jacob/readme.md b/keyboards/planck/keymaps/jacob/readme.md new file mode 100644 index 000000000..2a4be4ebc --- /dev/null +++ b/keyboards/planck/keymaps/jacob/readme.md @@ -0,0 +1 @@ +Focus of this particular keymap is to enable easy transition from more traditional keyboards to OLKB Planck.
\ No newline at end of file diff --git a/keyboards/planck/keymaps/jeebak/Makefile b/keyboards/planck/keymaps/jeebak/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/jeebak/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/jeebak/keymap.c b/keyboards/planck/keymaps/jeebak/keymap.c new file mode 100644 index 000000000..ec142ecbb --- /dev/null +++ b/keyboards/planck/keymaps/jeebak/keymap.c @@ -0,0 +1,364 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _TOUCHCURSOR 6 +#define _MOUSE 7 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor +// ^-- Requires KC_TRNS / _______ for the trigger key in the destination layer +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define LT_ML LT(_MOUSE, KC_A) // L-ayer T-ap M-ouse C-ursor (on A) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |----------+------+------+------+------+-------------+------+------+------+------+--------| + * | Ctrl/Esc | ML/A | S | D | F | G | H | J | K | L | ; | " | + * |----------+------+------+------+------+------|------+------+------+------+------+--------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Sft/Ent | + * |----------+------+------+------+------+------+------+------+------+------+------+--------| + * | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {CTL_ESC, LT_ML, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |----------+------+------+------+------+-------------+------+------+------+------+--------| + * | Ctrl/Esc | ML/A | R | S | T | D | H | N | E | I | O | " | + * |----------+------+------+------+------+------|------+------+------+------+------+--------| + * | Shift | Z | X | C | V | B | K | M | , | . | / |Sft/Ent | + * |----------+------+------+------+------+------+------+------+------+------+------+--------| + * | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {CTL_ESC, LT_ML, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |----------+------+------+------+------+-------------+------+------+------+------+--------| + * | Ctrl/Esc | ML/A | O | E | U | I | D | H | T | N | S | / | + * |----------+------+------+------+------+------|------+------+------+------+------+--------| + * | Shift | ; | Q | J | K | X | B | M | W | V | Z |Sft/Ent | + * |----------+------+------+------+------+------+------+------+------+------+------+--------| + * | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {CTL_ESC, LT_ML, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, + {KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Brite | | | | | | | Prev | Stop | Slct | Mute | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_LBRC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_RBRC, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MSTP, KC_MSEL, KC_MUTE} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Brite | | | | | | | Prev | Stop | Slct | Mute | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_MINS, KC_PIPE}, + {KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_DOT, KC_BSLS}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MSTP, KC_MSEL, KC_MUTE} +}, + +/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations + * ,-----------------------------------------------------------------------------------. + * | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + * + * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't + * seem to work on Mac. Presumably they'll work under Windows. + */ + +[_TOUCHCURSOR] = { + {_______, _______, _______, KC_LSFT, KC_LGUI, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______}, + {_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, + {_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Mouse Layer + * ,-----------------------------------------------------------------------------------. + * | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_MOUSE] = { + {_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_ACL2, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______}, + {_______, _______, _______, KC_BTN3, KC_BTN1, KC_BTN4, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______}, + {_______, _______, _______, _______, KC_BTN2, KC_BTN5, KC_WH_D, KC_BTN1, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | |Reset | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/jeebak/readme.md b/keyboards/planck/keymaps/jeebak/readme.md new file mode 100644 index 000000000..eb8104379 --- /dev/null +++ b/keyboards/planck/keymaps/jeebak/readme.md @@ -0,0 +1,107 @@ +jeebak's layout +======================= +This WIP keymap attempts to minimize fingers straying away from the home row. +To aid in this endeavor, when additional modifyer keys to switch layers are +needed, they will be mapped to home row keys. The `keymap.c` file will contain +the exact changes. The diagrams in this README shows the highlights of the +changes from the default mappings. + +I also decided to change all calls to `persistant_default_layer_set()` to +`update_tri_layer()` since this is my personal perference. + +## Base Layers (Qwerty/Colemak/Dvorak) +These base layers are mostly the same as the default mappings. The interesting +changes are shown below. The `Ctrl/Esc`, mapped using `CTL_T(KC_ESC)` will emit +an `Escape` when tapped, and act as a `Control` key when held. A `TODO` item is +to see if it can also act as a `CapsLock` when double-tapped. The right shift +key acts as `Enter` when tapped, and as a `Shift` key when held. The arrow +keys, which have been moved to the +[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been +replaced with the Media keys as shown. The `ML/A` key activates the Mouse layer +when held, and emits an `A` when tapped. +``` + ,-----------------------------------------------------------------------------------------. + | | | | | | | | | | | | | + |----------+------+------+------+------+-------------+------+------+------+------+--------| + | Ctrl/Esc | ML/A | | | | | | | | | | | + |----------+------+------+------+------+------|------+------+------+------+------+--------| + | | | | | | | | | | | |Sft/Ent | + |----------+------+------+------+------+------+------+------+------+------+------+--------| + | PrntScrn | RGUI | Alt | GUI |Lower | TC/Space |Raise | Next | Vol- | Vol+ | Play | + `-----------------------------------------------------------------------------------------' +``` + +## Lower Layer (Symbols and Function Keys) +The symbols and functions keys are essentially the same as the default mapping. +The most notable changes are that the symbol keys from the `RAISE` layer have +been moved here. The remaining Media keys replace those that are now on the +base layers. The `BACKLIT` key has also been moved here. +``` + ,-----------------------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + |------+------+------+------+------+-------------+------+------+------+------+------| + | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + |------+------+------+------+------+------|------+------+------+------+------+------| + | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ | + |------+------+------+------+------+------+------+------+------+------+------+------| + |Brite | | | | | | | Prev | Stop | Slct | Mute | + `-----------------------------------------------------------------------------------' +``` + +## Raise Layer (Numbers and Arithmetic Operators) +All of the numbers and arithmetic operators are available on this layer. Some +keys are duplicated for the convenience of their positions. The `0` and `$` +keys at the far left are for quick access to beginning and end of line in vim. +``` + ,-----------------------------------------------------------------------------------. + | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + |------+------+------+------+------+-------------+------+------+------+------+------| + | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | | + |------+------+------+------+------+------|------+------+------+------+------+------| + | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ | + |------+------+------+------+------+------+------+------+------+------+------+------| + |Brite | | | | | | | Prev | Stop | Slct | Mute | + `-----------------------------------------------------------------------------------' +``` + +## TouchCursor layer plus personal customizations +[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key +as the modifier, with the `IJKL` home row keys representing the inverted-T of +the arrow keys. All of the default TouchCursor keymappings for the right hand +are represented below. My personalizations include all of the keys shown for +the left hand. Having the `Alt` and `Shift` keys readily accessible from the +home row allows quick word jumps and highlighting when used in conjunction with +the arrow keys. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and +`KC_AGAIN` keycodes have been mapped but they don't seem to work on Mac. +Presumably they'll work under Windows. +``` + ,-----------------------------------------------------------------------------------. + | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | | + |------+------+------+------+------+-------------+------+------+------+------+------| + | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | | + |------+------+------+------+------+------|------+------+------+------+------+------| + | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | | + |------+------+------+------+------+------+------+------+------+------+------+------| + | | | | | | | | | | | | + `-----------------------------------------------------------------------------------' +``` + +## Mouse Layer +The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer. +The `A` key is used to activate this layer. All 16 keycodes for the mouse from +the `doc/keycode.txt` file are represented, and logically located, IMHO. The +left and right click buttons are duplicated; on the right hand side, for a +quick click here and there, and again on the left hand side for when the +buttons need to be held for dragging things or highlighting text, thus allowing +the right hand to be free to use the up/down/left/right actions. +``` + ,-----------------------------------------------------------------------------------. + | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | | + |------+------+------+------+------+-------------+------+------+------+------+------| + | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | | + |------+------+------+------+------+------|------+------+------+------+------+------| + | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | | + |------+------+------+------+------+------+------+------+------+------+------+------| + | | | | | | | | | | | | + `-----------------------------------------------------------------------------------' +``` diff --git a/keyboards/planck/keymaps/joe/Makefile b/keyboards/planck/keymaps/joe/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/joe/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/joe/keymap.c b/keyboards/planck/keymaps/joe/keymap.c new file mode 100644 index 000000000..023e1a120 --- /dev/null +++ b/keyboards/planck/keymaps/joe/keymap.c @@ -0,0 +1,89 @@ +#include "keymap.h" +#include "keymap_colemak.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = { /* Joe colemak */ + {F(3), KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {F(15), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + }, + [1] = { /* Joe soft Colemak */ + {F(3), CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_MINS}, + {KC_BSPC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_ENT }, + {F(15), CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + }, + [2] = { /* Joe NUMPAD */ + {F(3), KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, LSFT(KC_9), LSFT(KC_0), KC_PSLS, KC_P7, KC_P8, KC_P9 }, + {KC_BSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, LSFT(KC_5), KC_PEQL, KC_PAST, KC_P4, KC_P5, KC_P6 }, + {F(15), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PCMM, KC_PMNS, KC_P1, KC_P2, KC_P3 }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_TRNS, KC_TRNS, F(2), KC_PPLS, KC_P0, KC_PDOT, KC_PENT} + }, + [3] = { /* Joe 1337 haxOr5*/ + {F(3), KC_Q, KC_W, KC_F, KC_P, KC_6, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_MINS}, + {KC_BSPC, KC_4, KC_R, KC_5, KC_7, KC_D, KC_H, KC_N, KC_3, KC_1, KC_0, KC_ENT }, + {F(15), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_QUOT}, + {KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, F(1), KC_SPC, KC_SPC, F(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + }, + [4] = { /* Joe LOWER fn1 */ + {KC_GRV, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(3), M(2), M(1), M(0) }, + {KC_BSPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS}, + {KC_BSLS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LBRC, KC_RBRC, KC_PGUP, KC_EQL }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), KC_TRNS, KC_TRNS, F(2), KC_NO, KC_HOME, KC_PGDN, KC_END } + }, + [5] = { /* Joe UPPER fn2 */ + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, + {KC_DEL, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_WH_U, KC_BTN4, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO }, + {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_L, KC_WH_D, KC_WH_R, KC_NO, KC_NO, LCTL(KC_PGUP), LCTL(LALT(KC_UP)), LCTL(KC_PGDN) }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), KC_NO, KC_NO, F(2), KC_NO, LCTL(LALT(KC_LEFT)), LCTL(LALT(KC_DOWN)), LCTL(LALT(KC_RGHT))} + }, + [6] = { /* Joe SPECIAL fn3 */ + {KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, + {KC_NO, KC_MPLY, KC_MPRV, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET }, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, + {F(6), F(7), F(8), F(9), F(1), KC_TRNS, KC_TRNS, F(2), KC_POWER, KC_WAKE, KC_SLEP, LCTL(LALT(KC_L))} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(4), // fn1 + [2] = ACTION_LAYER_MOMENTARY(5), // fn2 + + /* ESC on tap, fn3 on hold */ + [3] = ACTION_LAYER_TAP_KEY(6, KC_ESC), + + /* toggle layers */ + [6] = ACTION_DEFAULT_LAYER_SET(0), + [7] = ACTION_DEFAULT_LAYER_SET(1), + [8] = ACTION_DEFAULT_LAYER_SET(2), + [9] = ACTION_DEFAULT_LAYER_SET(3), + + /* tab on tap, shift on hold */ + [15] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_TAB), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case 0: + /* :) */ + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_SCLN), TYPE(KC_0), UP(KC_LSFT), END ); + break; + case 1: + /* :( */ + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_SCLN), TYPE(KC_9), UP(KC_LSFT), END ); + break; + case 2: + /* (: | :) */ + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_9), TYPE(KC_SCLN), TYPE(KC_SPC), TYPE(KC_SPC), TYPE(KC_SCLN), TYPE(KC_0), UP(KC_LSFT), TYPE(KC_LEFT), TYPE(KC_LEFT), TYPE(KC_LEFT), END ); + break; + case 3: + /* :( | ): */ + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_SCLN), TYPE(KC_9), TYPE(KC_SPC), TYPE(KC_SPC), TYPE(KC_0), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_LEFT), TYPE(KC_LEFT), TYPE(KC_LEFT), END ); + break; + default: + break; + } + return MACRO_NONE; +} diff --git a/keyboards/planck/keymaps/kyle/Makefile b/keyboards/planck/keymaps/kyle/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/kyle/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/kyle/keymap.c b/keyboards/planck/keymaps/kyle/keymap.c new file mode 100644 index 000000000..f113d0e03 --- /dev/null +++ b/keyboards/planck/keymaps/kyle/keymap.c @@ -0,0 +1,38 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_RCTL, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT}, + {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), LSFT(RSFT(KC_D)), KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS}, + {BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +}; diff --git a/keyboards/planck/keymaps/leo/Makefile b/keyboards/planck/keymaps/leo/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/leo/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/leo/keymap.c b/keyboards/planck/keymaps/leo/keymap.c new file mode 100644 index 000000000..25a5e1579 --- /dev/null +++ b/keyboards/planck/keymaps/leo/keymap.c @@ -0,0 +1,35 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* BASE */ + {KC_ESC, KC_LBRC, KC_QUOT, KC_SCLN, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_TAB, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT}, + {KC_LSFT, KC_DOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_COMM}, + {KC_LCTL, KC_LALT, KC_LGUI, FUNC(3), FUNC(2), KC_SPC, KC_SPC, FUNC(1), FUNC(3), KC_RGUI, KC_RALT, KC_RCTL} +}, +[2] = { /* RAISE */ + {RALT(KC_RBRC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, S(KC_RBRC)}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[3] = { /* LOWER */ + {S(KC_EQL),S(KC_1),S(KC_2),S(KC_3),RALT(KC_5),S(KC_5), S(KC_6), S(KC_7),RALT(KC_7),RALT(KC_0),S(KC_0), KC_MINS}, + {KC_TRNS,RALT(KC_2),S(KC_SLSH),KC_NUBS,S(KC_NUBS),RALT(KC_MINS),RALT(KC_NUBS), KC_NUHS, S(KC_8), S(KC_9), S(KC_MINS), KC_SLSH}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[4] = { /* META */ + {KC_TRNS, KC_HOME, KC_UP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_TRNS, KC_DEL}, + {KC_TRNS, KC_RGHT, KC_DOWN, KC_LEFT, KC_PGUP, KC_TRNS, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_PGDN, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + [3] = ACTION_LAYER_MOMENTARY(4), // to META + +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/lucas/Makefile b/keyboards/planck/keymaps/lucas/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/lucas/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/lucas/keymap.c b/keyboards/planck/keymaps/lucas/keymap.c new file mode 100644 index 000000000..2208780b1 --- /dev/null +++ b/keyboards/planck/keymaps/lucas/keymap.c @@ -0,0 +1,164 @@ +/* +This is the keymap of /u/deepshitgoeshere! +Layer 1 exists so I can have the symbol positions of QWERTY while having my system in german. +The second layer has all the german umlauts I need and with capital and small letters on the +same layer there is no need to press shift+lower. +This keymap is made to work with software implemented QWERTZ. +The "Gaming" layer is mainly customized for CS:GO. +If you have any question about this keymap feel free to shoot me a message on reddit! +*/ + +#include "keymap.h" +#include "keymap_german.h" +#include "backlight.h" +#include "debug.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Colemak + * ,-----------------------------------------------------------------------. + * | Esc | q | w | f | p | g | j | l | u | y | ; | - | + * |-----------------------------------------------------------------------| + * | BS | a | r | s | t | d | h | n | e | i | o | ' | + * |-----------------------------------------------------------------------| + * | SFT | z | x | c | v | b | k | m | , | . | / | Ent | + * |-----------------------------------------------------------------------| + * | CTL | GUI | Tab | ALT |Lower| Space |Raise|Left |Down | Up |Right| + * `-----------------------------------------------------------------------' + */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Z, DE_SCLN, DE_MINS}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, DE_QUOT}, + {M(0), KC_Y, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, DE_COMM, DE_DOT, DE_SLSH, KC_ENT}, + {KC_LCTL, KC_LGUI, KC_TAB, KC_LALT, F(2), F(3), F(3), F(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[1] = { /* Symbols + * ,-----------------------------------------------------------------------. + * | | | | | | | | | | | : | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | " | + * |-----------------------------------------------------------------------| + * | | | | | | | | | < | > | ? | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DE_DOT, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DE_DQOT}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), DE_MORE, DE_QST, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[2] = { /* Raise + * ,-----------------------------------------------------------------------. + * | | Ä | | | | | | | Ü | Ö | |Game | + * |-----------------------------------------------------------------------| + * | Del | ä | | ß | | | | | ü | ö | |FVol+| + * |-----------------------------------------------------------------------| + * | | | | | | | | |Stop | Prv | Nxt |FVol-| + * |-----------------------------------------------------------------------| + * |LCTL |LGUI | Tab |LALT |Lower| Space | |Mute |Vol- |Vol+ | P/P | + * `-----------------------------------------------------------------------' + */ + {KC_NO, S(DE_AE), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, S(DE_UE), S(DE_OE), KC_NO, F(4)}, + {KC_DEL, DE_AE, KC_NO, DE_SS, KC_NO, KC_NO, KC_NO, KC_NO, DE_UE, DE_OE, KC_NO, RALT(KC_F12)}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MSTP, KC_MPRV, KC_MNXT, RALT(KC_F11)}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* Lower + * ,-----------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | + | + * |-----------------------------------------------------------------------| + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | = | + * |-----------------------------------------------------------------------| + * | | | | | | [ | ] | { | } | € | | \ | Ent | + * |-----------------------------------------------------------------------| + * |LCTL |LGUI | Tab |LALT | | Space |Raise|Home |PgDn |PgUp | End | + * `-----------------------------------------------------------------------' + */ + {DE_TILD, DE_EXLM, DE_AT, DE_HASH, DE_DLR, DE_PERC, DE_CIRC, DE_AMPR, DE_ASTR, DE_LPRN, DE_RPRN, DE_PLUS}, + {DE_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_EQL}, + {KC_NO, KC_NO, KC_NO, DE_PIPE, DE_LBRC, DE_RBRC, DE_LCBR, DE_RCBR, DE_EURO, KC_NO, DE_BSLS, KC_ENT}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +}, +[4] = { /* Function + * ,-----------------------------------------------------------------------. + * | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | + * |-----------------------------------------------------------------------| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-----------------------------------------------------------------------| + * | | | | | | KP- | KP+ | | | | |Reset| + * |-----------------------------------------------------------------------| + * | |Light|BL DN|BL UP| | | | |Mute |Vol- |Vol+ | P/P | + * `-----------------------------------------------------------------------' + */ + {KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_NO, KC_NO, KC_NO, RESET, KC_NO}, + {KC_NO, BL_TOGG, BL_DEC, BL_INC, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[5] = { /* Gaming + * ,-----------------------------------------------------------------------. + * | Buy | ESC | q | w | e | r | t | y | u | i | o | p | + * |-----------------------------------------------------------------------| + * | ENT | BS | a | s | d | f | g | h | j | k | l | ; | + * |-----------------------------------------------------------------------| + * | CTL | SFT | z | x | c | v | b | n | m | , | Up | / | + * |-----------------------------------------------------------------------| + * | | | Tab | ALT | | Space |CrJmp| GUI |Left |Down |Right| + * `-----------------------------------------------------------------------' + */ + {MO(6), KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, F(4)}, + {KC_ENT, KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_SCLN}, + {KC_LCTL, KC_LSFT, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, DE_DOT, KC_UP, DE_SLSH}, + {KC_NO, KC_NO, KC_TAB, KC_LALT, KC_NO, KC_SPC, KC_SPC, LCTL(KC_SPC), KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT} +}, +[6] = { /* Gaming + * CS:GO buy binds + * ,-----------------------------------------------------------------------. + * | | | | | | | | | 7 | 8 | 9 | | + * |-----------------------------------------------------------------------| + * | BS | | | | | | | | 6 | 5 | 4 | End | + * |-----------------------------------------------------------------------| + * | CTL | SFT | | | | | | | 1 | 2 | 3 |Pgdn | + * |-----------------------------------------------------------------------| + * | | | Tab | ALT | | Space |CrJmp| | 0 | KP+ |PEnt | + * `-----------------------------------------------------------------------' + */ + {KC_TRNS, KC_NO, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_P7, KC_P8, KC_P9, KC_NO}, + {KC_BSPC, KC_NO, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_P4, KC_P5, KC_P6, KC_END}, + {KC_LCTL, KC_LSFT, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_K, KC_P1, KC_P2, KC_P3, KC_PGDN}, + {KC_NO, KC_NO, KC_TAB, KC_LALT, KC_NO, KC_SPC, KC_SPC, LCTL(KC_SPC), KC_NO, KC_P0, KC_PDOT, KC_PENT} +}, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + [3] = ACTION_LAYER_TAP_KEY(4,KC_SPC), // to Function + [4] = ACTION_LAYER_TOGGLE(5), // toggle Gaming + [5] = ACTION_MODS_TAP_KEY(KC_LSFT, KC_CAPS), //Shift on press, Caps on tap +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: // M(0) + if (record->event.pressed) { + register_code(KC_LSFT); + layer_on(1); + } else { + layer_off(1); + unregister_code(KC_LSFT); + } + break; + case 1: // M(1) + if (record->event.pressed) { + unregister_code(KC_LSFT); + register_code(DE_MORE); + } else { + unregister_code(DE_MORE); + } + break; + } + return MACRO_NONE; + +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/lukas/Makefile b/keyboards/planck/keymaps/lukas/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/lukas/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/lukas/keymap.c b/keyboards/planck/keymaps/lukas/keymap.c new file mode 100644 index 000000000..6fd95378b --- /dev/null +++ b/keyboards/planck/keymaps/lukas/keymap.c @@ -0,0 +1,64 @@ +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// This simple keymap is optimized for xmonad users using super as their modifier key. +// M(1) makes it possible to change virtual screens and swap windows between them. + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +#define _QW 0 +#define _LW 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, M(1), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + }, + [_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + }, + [_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 1: + if (record->event.pressed) { + register_code(KC_LGUI); + layer_on(_RS); + } else { + unregister_code(KC_LGUI); + layer_off(_RS); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/max/Makefile b/keyboards/planck/keymaps/max/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/max/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/max/keymap.c b/keyboards/planck/keymaps/max/keymap.c new file mode 100644 index 000000000..a93b1f47d --- /dev/null +++ b/keyboards/planck/keymaps/max/keymap.c @@ -0,0 +1,38 @@ +#include "keymap.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { /* Qwerty */ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, + {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + // Space is repeated to accommadate for both spacebar wiring positions +}, +[1] = { /* Colemak */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, + {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[2] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TRNS}, + {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_BSLS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[3] = { /* LOWER */ + {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, + {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), KC_TRNS}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, S(KC_BSLS)}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/mollat/Makefile b/keyboards/planck/keymaps/mollat/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/mollat/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/mollat/keymap.c b/keyboards/planck/keymaps/mollat/keymap.c new file mode 100644 index 000000000..e7c71efd4 --- /dev/null +++ b/keyboards/planck/keymaps/mollat/keymap.c @@ -0,0 +1,149 @@ +// +// This layout is based on the following needs: +// +// should be as close as possible to querty/us-international layout (using international/AltGr as o/s driver) +// added german umlauts at known places from de-layout +// all movement keys should be at known places from vi/bash (eg HJKL for cursor keys) +// Fn layer (at CapsLock place like the Pok3r does) for missing keys +// additional layer for tmux window switching +// +// This is work in Progress! If you have suggestions write me at github.com/mollat/qmk_firmware/ and check +// this fork for updates as I probably won't bother jack with my pull requests frequently. +// + +#include "planck.h" + +#define _QWERTY 0 +#define _HIGH 1 +#define _LOW 2 +#define _FN 3 +#define _TMUX 4 +#define _LCTL 5 +#define _MOUSE 6 +#define __________ KC_NO // just for easy reading + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { /* Qwerty */ + { LT(_MOUSE, KC_ESC),KC_Q,KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + { LT(_FN, KC_TAB),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + { __________, __________, KC_LGUI, KC_LALT, KC_LCTL,LT(_TMUX, KC_SPC),LT(_HIGH, KC_SPC),MO(_LOW),KC_RALT,KC_RGUI, __________, __________ } +}, + +// missing keys regarding to the form factor +// keeping the dot and comma for typing faster IP addresses and (german) float values +// putting the backslash on the slash's place +[_HIGH] = { + { KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_MINS }, + { __________, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL }, + { __________, __________, __________, __________, __________, __________, __________, __________, KC_COMM, KC_DOT, KC_BSLS, LSFT(KC_BSLS)}, + { __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________ } +}, + +// classic Fn-Layer triggered with 'CapsLock-key' like on Pok3r +// SPC and ENT are doubled for using repeat (which I switched off, see https://github.com/tmk/tmk_keyboard/issues/287) +// '€' sign is on the '5' position as this is the usual AltGr place on the US Internation layout +// home/end at the 'a' and 'e' position like in bash +// ins at 'i' +// del besides backspace (had no better place for it because of the umlauts) +// pg-down at 'f' (forward in vi), pg-up at 'b' (back in 'vi') +// +[_FN] = { + { __________, __________, __________, KC_END, __________, __________, __________, __________, KC_INS, __________, KC_DEL, RALT(KC_Y) }, + { KC_TRNS, __________, RALT(KC_S), __________, KC_PGDN, RALT(KC_5), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, RALT(KC_P), RALT(KC_Q) }, + { __________, KC_HOME, __________, __________, __________, KC_PGUP, __________, __________, __________, __________, __________, KC_ENT }, + { RESET, __________, __________, __________, __________, KC_SPC, KC_SPC, __________, __________, __________, __________, __________ } +}, + +// function key layer and some shift + (missing key at the small form factor) +[_LOW] = { + { KC_TILD, __________, __________, __________, __________, __________, __________, __________, __________, KC_LCBR, KC_RCBR, KC_UNDS }, + { __________, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_LBRC, KC_RBRC, KC_PLUS }, + { __________, __________, __________, __________, __________, KC_F9, KC_F10, KC_F11, KC_F12, __________, __________, __________ }, + { __________, __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________ } +}, + +// most macros will switch tmux screens +// two macros are for vi's save/quit at 'w' and 'q' +[_TMUX] = { + { __________, M(14), M(13), __________, __________, __________, __________, __________, __________, __________, M(11), __________ }, + { M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), __________, __________ }, + { __________, __________, __________, M(12), __________, __________, M(10), __________, __________, __________, __________, __________ }, + { __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________, __________ } +}, + +// mouse movement can be improved (e.g. can't press hj at once), but I will use this seldom, so I stick with hjkl keys. +[_MOUSE] = { + { KC_TRNS, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________ }, + { __________, __________, __________, __________, KC_WH_D, __________, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, __________, __________ }, + { __________, __________, __________, __________, __________, KC_WH_U, __________, __________, __________, __________, __________, __________ }, + { __________, __________, __________, KC_ACL2, KC_ACL1, KC_ACL0, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, __________, __________, __________ } +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [_LCTL] = ACTION_MODS_TAP_KEY(KC_LCTL, M(12)), // does not work +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_0), END ); + break; + case 1: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_1), END ); + break; + case 2: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_2), END ); + break; + case 3: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_3), END ); + break; + case 4: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_4), END ); + break; + case 5: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_5), END ); + break; + case 6: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_6), END ); + break; + case 7: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_7), END ); + break; + case 8: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_8), END ); + break; + case 9: + // tmux last window + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_L), END ); + break; + // tmux next window + case 10: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_N), END ); + break; + // tmux previous window + case 11: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_P), END ); + break; + // tmux new window + case 12: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_C), END ); + break; + case 13: + // vi save document + return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_W), TYPE(KC_ENT), END ); + break; + case 14: + // vi quit + return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_Q), TYPE(KC_ENT), END ); + break; + // tmux press ctrl-b + case 15: + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), END ); + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/nico/Makefile b/keyboards/planck/keymaps/nico/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/nico/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/nico/keymap.c b/keyboards/planck/keymaps/nico/keymap.c new file mode 100644 index 000000000..e81fd80a4 --- /dev/null +++ b/keyboards/planck/keymaps/nico/keymap.c @@ -0,0 +1,69 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "backlight.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _LW 3 +#define _RS 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_ESC, KC_LALT, KC_LGUI, F(1), KC_SPC, KC_SPC, F(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_ESC, KC_LALT, KC_LGUI, F(1), KC_SPC, KC_SPC, F(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DV] = { /* Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {M(0), KC_ESC, KC_LALT, KC_LGUI, F(1), KC_SPC, KC_SPC, F(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F14, KC_F15, KC_TRNS, KC_MFFD, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F14, KC_F15, KC_TRNS, KC_MFFD, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_KEY(MO(_LW), KC_BSPC), // Tap for backspace, hold for LOWER + [2] = ACTION_LAYER_TAP_KEY(MO(_RS), KC_ENT), // Tap for enter, hold for RAISE +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + backlight_step(); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/pete/Makefile b/keyboards/planck/keymaps/pete/Makefile new file mode 100644 index 000000000..20bba3f49 --- /dev/null +++ b/keyboards/planck/keymaps/pete/Makefile @@ -0,0 +1,15 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +AUDIO_ENABLE = no +NKRO_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/pete/keymap.c b/keyboards/planck/keymaps/pete/keymap.c new file mode 100644 index 000000000..38275b403 --- /dev/null +++ b/keyboards/planck/keymaps/pete/keymap.c @@ -0,0 +1,266 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _FCT 5 +#define _SETUP 6 +#define _MAC 7 +#define _WIN 8 +#define _LIN 9 +#define _MICMUTE 16 +#define _OS 17 + + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define FCT M(_FCT) +#define OS M(_OS) +#define MAC M(_MAC) +#define WIN M(_WIN) +#define LIN M(_LIN) +#define MICMUTE M(_MICMUTE) + +#define MACPRNT LGUI(LSFT(KC_3)) +#define MACPRNT2 LGUI(LSFT(KC_4)) +#define WINPRNT KC_PSCR +#define WINPRNT2 LGUI(KC_PSCR) +#define CYCLWIN LGUI(KC_GRV) +#define MACSLEEP LSFT(LCTL(KC_POWER)) +#define WINSLEEP KC_SLEP + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {OS, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {OS, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {OS, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {_______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {_______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_RAISE, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +[_SETUP] = { /* Setup */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, WIN, MAC, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______} +}, +[_MAC] = { /* Mac */ + {CYCLWIN,MACSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DELT}, + {_______, MICMUTE, KC_MUTE, KC_VOLD, KC_VOLU, MACPRNT,MACPRNT2, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX}, + {_______, BL_STEP, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX}, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDOWN,KC_PGUP,KC_END } +}, +[_WIN] = { /* Windows */ + {CYCLWIN,WINSLEEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_DELT}, + {_______, MICMUTE, KC_MUTE, KC_VOLD, KC_VOLU, WINPRNT,WINPRNT2, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX}, + {_______, BL_STEP, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX}, + {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDOWN,KC_PGUP,KC_END } +}, +[_LIN] = { /* Linux */ + {KC_L, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + +}; + +int currentOs = _MAC; +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = { + {440.0*pow(2.0,(31)/12.0), 12}, + {440.0*pow(2.0,(28)/12.0), 8}, + {440.0*pow(2.0,(19)/12.0), 8}, + {440.0*pow(2.0,(24)/12.0), 8}, + {440.0*pow(2.0,(28)/12.0), 20} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _SETUP); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _SETUP); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _SETUP); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _SETUP); + } + break; + case _FCT: + if (record->event.pressed) { + layer_on(_FCT); + } else { + layer_off(_FCT); + } + break; + case _MICMUTE: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_RALT); + register_code(KC_RGUI); + } else { + unregister_code(KC_RSFT); + unregister_code(KC_RCTL); + unregister_code(KC_RALT); + unregister_code(KC_RGUI); + } + break; + case _OS: + if (record->event.pressed) { + layer_on(currentOs); + } else { + layer_off(_MAC); + layer_off(_WIN); + layer_off(_LIN); + } + break; + case _MAC: + case _WIN: + case _LIN: + if (record->event.pressed) { + layer_off(currentOs); + currentOs = id; + } + break; + } + return MACRO_NONE; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // stops the tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +uint8_t starting_note = 0x0C; +int offset = 0; + +bool process_action_user(keyrecord_t *record) { + + if (IS_LAYER_ON(_MUSIC)) { + if (record->event.pressed) { + play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); + } else { + stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); + } + return false; + } + return true; +} +#endif diff --git a/keyboards/planck/keymaps/pete/readme.md b/keyboards/planck/keymaps/pete/readme.md new file mode 100644 index 000000000..3cf594f3a --- /dev/null +++ b/keyboards/planck/keymaps/pete/readme.md @@ -0,0 +1,14 @@ +# Planck Layout by Pete + +This layout is based on the default layout but uses a FN key in the bottom left corner instead of the shift / backlight key. +On the FN layer you can do the following things + +- Step through back light +- Put a mac to sleep +- The Fxx keys in a block to click with the right hand +- The delete key in the upper right corner +- Quick access to screenshot functions +- Control volume and media playback +- Home/PgDown/PgUp/End buttons where the arrow keys are + +Pressing the lower and raise buttons allows to reset and change from QWERT to Colemak or Dvorak. diff --git a/keyboards/planck/keymaps/pvc/Makefile b/keyboards/planck/keymaps/pvc/Makefile new file mode 100644 index 000000000..0b2f060de --- /dev/null +++ b/keyboards/planck/keymaps/pvc/Makefile @@ -0,0 +1,24 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/pvc/config.h b/keyboards/planck/keymaps/pvc/config.h new file mode 100644 index 000000000..c857a3e89 --- /dev/null +++ b/keyboards/planck/keymaps/pvc/config.h @@ -0,0 +1,88 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/planck/keymaps/pvc/keymap.c b/keyboards/planck/keymaps/pvc/keymap.c new file mode 100644 index 000000000..2fc5f0da1 --- /dev/null +++ b/keyboards/planck/keymaps/pvc/keymap.c @@ -0,0 +1,478 @@ +#include "planck.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "led.h" + +#ifdef AUDIO_ENABLE + #include "audio.h" + #include "song_list.h" +#endif + +#define LAYER_QWERTY 0 +#define LAYER_COLEMAK 1 +#define LAYER_DVORAK 2 +#define LAYER_UPPER 3 +#define LAYER_LOWER 4 +#define LAYER_FUNCTION 5 +#define LAYER_MOUSE 6 +#define LAYER_ADJUST 7 + +#define MACRO_QWERTY 0 +#define MACRO_COLEMAK 1 +#define MACRO_DVORAK 2 +#define MACRO_UPPER 3 +#define MACRO_LOWER 4 +#define MACRO_FUNCTION 5 +#define MACRO_MOUSE 6 +#define MACRO_TIMBRE_1 7 +#define MACRO_TIMBRE_2 8 +#define MACRO_TIMBRE_3 9 +#define MACRO_TIMBRE_4 10 +#define MACRO_TEMPO_U 11 +#define MACRO_TEMPO_D 12 +#define MACRO_TONE_DEFAULT 13 +#define MACRO_MUSIC_TOGGLE 14 +#define MACRO_AUDIO_TOGGLE 16 +#define MACRO_INC_VOICE 18 +#define MACRO_DEC_VOICE 19 +#define MACRO_BACKLIGHT 20 +#define MACRO_BREATH_TOGGLE 21 +#define MACRO_BREATH_SPEED_INC 23 +#define MACRO_BREATH_SPEED_DEC 24 +#define MACRO_BREATH_DEFAULT 25 + +#define M_QWRTY M(MACRO_QWERTY) +#define M_COLMK M(MACRO_COLEMAK) +#define M_DVORK M(MACRO_DVORAK) +#define M_UPPER M(MACRO_UPPER) +#define M_LOWER M(MACRO_LOWER) +#define M_FUNCT M(MACRO_FUNCTION) +#define M_MOUSE M(MACRO_MOUSE) +#define TIMBR_1 M(MACRO_TIMBRE_1) +#define TIMBR_2 M(MACRO_TIMBRE_2) +#define TIMBR_3 M(MACRO_TIMBRE_3) +#define TIMBR_4 M(MACRO_TIMBRE_4) +#define TMPO_UP M(MACRO_TEMPO_U) +#define TMPO_DN M(MACRO_TEMPO_D) +#define TMPO_DF M(MACRO_TONE_DEFAULT) +#define M_BACKL M(MACRO_BACKLIGHT) +#define M_BRTOG M(MACRO_BREATH_TOGGLE) +#define M_BSPDU M(MACRO_BREATH_SPEED_INC) +#define M_BSPDD M(MACRO_BREATH_SPEED_DEC) +#define M_BDFLT M(MACRO_BREATH_DEFAULT) + + +#define VC_UP M(MACRO_INC_VOICE) +#define VC_DOWN M(MACRO_DEC_VOICE) + + +#define SC_UNDO LCTL(KC_Z) +#define SC_REDO LCTL(KC_Y) +#define SC_CUT LCTL(KC_X) +#define SC_COPY LCTL(KC_C) +#define SC_PSTE LCTL(KC_V) +#define SC_SELA LCTL(KC_A) +#define SC_SAVE LCTL(KC_S) +#define SC_OPEN LCTL(KC_O) +#define SC_ACLS LALT(KC_F4) +#define SC_CCLS LCTL(KC_F4) + +#define OS_SHFT KC_FN0 + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define ________________ _______, _______ +#define XXXXXXXXXXXXXXXX XXXXXXX, XXXXXXX + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY + * .-----------------------------------------------------------------------------------------------------------. + * | TAB | Q | W | E | R | T | Y | U | I | O | P | BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | UP | ENTER | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | SHIFT | LEFT | DOWN | RIGHT | + * '-----------------------------------------------------------------------------------------------------------' + */ + + [LAYER_QWERTY] = { // QWERTY + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* COLEMAK + * .-----------------------------------------------------------------------------------------------------------. + * | TAB | Q | W | F | P | G | J | L | U | Y | ; | ESC | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | BACKSP | A | R | S | T | D | H | N | E | I | O | ' | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LSHIFT | Z | X | C | V | B | K | M | , | . | UP | ENTER | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | SHIFT | LEFT | DOWN | RIGHT | + * '-----------------------------------------------------------------------------------------------------------' + */ + + [LAYER_COLEMAK] = { // COLEMAK + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_ESC }, + { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, OS_SHFT, KC_LEFT, KC_DOWN, KC_RGHT }, + }, + +/* DVORAK + * .-----------------------------------------------------------------------------------------------------------. + * | TAB | ' | , | . | P | Y | F | G | C | R | L | BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | ESC | A | O | E | U | I | D | H | T | N | S | / | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | ENTER | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | SPACE | SPACE | LOWER | UP | DOWN | LEFT | RIGHT | + * '-----------------------------------------------------------------------------------------------------------' + */ + + [LAYER_DVORAK] = { // DVORAK + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, + { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC, KC_SPC, M_LOWER, KC_UP, KC_DOWN, KC_LEFT, KC_RGHT }, + }, + +/* UPPER + * .-----------------------------------------------------------------------------------------------------------. + * | PRINT | F1 | F2 | F3 | F4 | NUM LK | / | 7 | 8 | 9 | - | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | CAP LK | F5 | F6 | F7 | F8 | SCR LK | * | 4 | 5 | 6 | + | INS | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | F9 | F10 | F11 | F12 | PAUSE | | 1 | 2 | 3 | ENTER | HOME | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | | | | | 0 | 0 | | RALT | . | ENTER | END | + * '-----------------------------------------------------------------------------------------------------------' + */ + + [LAYER_UPPER] = { // UPPER + { KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_NLCK, KC_PSLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, KC_DEL }, + { KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_SLCK, KC_PAST, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, KC_INS }, + { _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, KC_HOME }, + { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, KC_END }, + }, + +/* LOWER + * .-----------------------------------------------------------------------------------------------------------. + * | | $ | { | [ | ( | % | # | ) | ] | } | @ | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | ^ | * | + | - | ; | : | _ | ' | " | ` | PG DN | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | & | ! | ~ | / | \ | = | < | > | ? | HOME | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | | | | | | | | | | | | END | + * '-----------------------------------------------------------------------------------------------------------' + */ + + [LAYER_LOWER] = { // LOWER + { _______, KC_DLR, KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT, KC_PGUP }, + { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT, KC_GRV, KC_PGDN }, + { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL, KC_LT, KC_GT, KC_QUES, KC_HOME }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END }, + }, + + +/* FUNCTION + * .-----------------------------------------------------------------------------------------------------------. + * | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | PAUSE | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | CAP LK | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | PRINT | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | LWIN | FN | LALT | UPPER | PLAY | PLAY | LOWER | VOL UP | VOL DN | NEXT | PREV | + * '-----------------------------------------------------------------------------------------------------------' + */ + [LAYER_FUNCTION] = { // FUNCTION + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PAUS }, + { KC_CAPS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_PSCR }, + { KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE }, + { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT }, + }, + +#ifdef MOUSEKEY_ENABLE + + [LAYER_MOUSE] = { // MOUSE + { KC_ESC, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC }, + { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, + { _______, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, KC_MS_U, KC_MS_D, KC_MS_L, KC_MS_R }, + }, + +#endif + + [LAYER_ADJUST] = { // ADJUST + { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, MU_TOG, AU_TOG }, + { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, M_BACKL, RESET, _______, M_MOUSE, _______, _______, MUV_IN, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MUV_DE, _______ }, + }, + +/* + [LAYER_EMPTY] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, }, + { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, }, + }, +*/ + +}; + +#ifdef AUDIO_ENABLE + +float tone_my_startup[][2] = SONG(ODE_TO_JOY); +float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE); +float tone_music_on[][2] = SONG(DOE_A_DEER); +float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); +float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND); +float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND); +float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +#endif /* AUDIO_ENABLE */ + +void persistant_default_layer_set(uint16_t default_layer) +{ + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_ONESHOT(MOD_LSFT), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + + // MACRODOWN only works in this function + switch(id) + { + + case MACRO_QWERTY: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_QWERTY); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_COLEMAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_COLEMAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_DVORAK: + if (record->event.pressed) + { + persistant_default_layer_set(1UL<<LAYER_DVORAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO); + #endif /* AUDIO_ENABLE */ + } + break; + + case MACRO_LOWER: + if (record->event.pressed) + { + layer_on(LAYER_LOWER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_LOWER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_UPPER: + if (record->event.pressed) + { + layer_on(LAYER_UPPER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + else + { + layer_off(LAYER_UPPER); + update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); + } + break; + + case MACRO_FUNCTION: + if (record->event.pressed) + { + layer_on(LAYER_FUNCTION); + } + else + { + layer_off(LAYER_FUNCTION); + } + break; + + +#ifdef BACKLIGHT_ENABLE + case MACRO_BACKLIGHT: + if (record->event.pressed) + { + backlight_step(); + } +#endif + +#ifdef MOUSEKEY_ENABLE + + case MACRO_MOUSE: + if (record->event.pressed) + { + layer_invert(LAYER_MOUSE); + } + break; + +#endif /* MOUSEKEY_ENABLE */ + +#ifdef AUDIO_ENABLE + + case MACRO_TIMBRE_1: + if (record->event.pressed) set_timbre(TIMBRE_12); + break; + + case MACRO_TIMBRE_2: + if (record->event.pressed) set_timbre(TIMBRE_25); + break; + + case MACRO_TIMBRE_3: + if (record->event.pressed) set_timbre(TIMBRE_50); + break; + + case MACRO_TIMBRE_4: + if (record->event.pressed) set_timbre(TIMBRE_75); + break; + + case MACRO_TEMPO_U: + if (record->event.pressed) increase_tempo(10); + break; + + case MACRO_TEMPO_D: + if (record->event.pressed) decrease_tempo(10); + break; + + case MACRO_TONE_DEFAULT: + if (record->event.pressed) + { + set_timbre(TIMBRE_DEFAULT); + set_tempo(TEMPO_DEFAULT); + } + break; + +#endif /* AUDIO_ENABLE */ + + default: + break; + + } + return MACRO_NONE; +}; + + +#ifdef AUDIO_ENABLE + +void matrix_init_user(void) +{ + set_voice(default_voice); + startup_user(); + println("Matrix Init"); +} + +void led_set_user(uint8_t usb_led) +{ + static uint8_t old_usb_led = 0; + + _delay_ms(10); // gets rid of tick + + if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning on... + PLAY_NOTE_ARRAY(tone_caps_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK))) + { + // If CAPS LK LED is turning off... + PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LK LED is turning on... + PLAY_NOTE_ARRAY(tone_numlk_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK))) + { + // If NUM LED is turning off... + PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO); + } + else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LK LED is turning on... + PLAY_NOTE_ARRAY(tone_scroll_on, false, LEGATO); + } + else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK))) + { + // If SCROLL LED is turning off... + PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO); + } + old_usb_led = usb_led; +} + + +void startup_user() +{ + _delay_ms(10); // gets rid of tick + PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO); + _delay_ms(2000); + stop_all_notes(); +} + +void audio_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO); +} + +void music_on_user(void) +{ + PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, STACCATO); +} + +#endif /* AUDIO_ENABLE */
\ No newline at end of file diff --git a/keyboards/planck/keymaps/readme.md b/keyboards/planck/keymaps/readme.md new file mode 100644 index 000000000..54fb5f6d9 --- /dev/null +++ b/keyboards/planck/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Planck keymaps + +* **default** default Planck layout +* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tak3over/Makefile b/keyboards/planck/keymaps/tak3over/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/planck/keymaps/tak3over/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tak3over/keymap.c b/keyboards/planck/keymaps/tak3over/keymap.c new file mode 100644 index 000000000..7d8243dfa --- /dev/null +++ b/keyboards/planck/keymaps/tak3over/keymap.c @@ -0,0 +1,130 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. +// +//Dropped the Dvorak layer and added two my layer buttons. Both Raise and lower can be accessed from either side now. + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _LW 2 +#define _RS 3 +#define _FN 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI |Func |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QW] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, MO(_FN), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI |Func |Lower | Space |Raise | Left | Down | Up |Right + * `-----------------------------------------------------------------------------------' + */ +[_CM] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, MO(_FN), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 | _ | + | { | } |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI |Func |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_RS] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | Reset| Ins | Home | PGUP |Colemk| Left | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Brite| Del | End | PGDN |Qwerty| Del | _ | + | { | } |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI |Func |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_LW] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, RESET, KC_INS, KC_HOME, KC_PGUP, DF(_CM), KC_LEFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, M(0), KC_DEL, KC_END, KC_PGDN, DF(_QW), KC_DEL, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +/* Function + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | GUI | X | C | V | Z | Left | Down | Up |Right | Del | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |Shift | Ctrl | X | C | V | Z | Next | Mute | Vol- | Vol+ | Play |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI |Func |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_FN] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_RGUI, KC_X, KC_C, KC_V, KC_Z, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_DEL, KC_BSLS}, + {KC_TRNS, KC_RCTL, KC_X, KC_C, KC_V, KC_Z, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/unicode/Makefile b/keyboards/planck/keymaps/unicode/Makefile new file mode 100644 index 000000000..110af7501 --- /dev/null +++ b/keyboards/planck/keymaps/unicode/Makefile @@ -0,0 +1,11 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +UNICODE_ENABLE = yes # Unicode + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/unicode/keymap.c b/keyboards/planck/keymaps/unicode/keymap.c new file mode 100644 index 000000000..d73e7e09d --- /dev/null +++ b/keyboards/planck/keymaps/unicode/keymap.c @@ -0,0 +1,326 @@ +/* + Copyright + 2015 Jack Humbert <jack.humb@gmail.com> + 2016 Francois Marlier <fmarlier@gmail.com> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + + For more info on how this works per OS, see here + https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input +*/ + + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 +#define PLOVER M(12) +#define EXT_PLV M(13) +#define TOG_OUT M(14) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, UC_q, UC_w, UC_f, UC_p, UC_g, UC_j, UC_l, UC_u, UC_y, UC_SCLN, UC_BSPC}, + {KC_ESC, UC_a, UC_r, UC_s, UC_t, UC_d, UC_h, UC_n, UC_e, UC_i, UC_o, UC_QUOT}, + {KC_LSFT, UC_z, UC_x, UC_c, UC_v, UC_b, UC_k, UC_m, UC_COMM, UC_DOT, UC_SLSH, KC_ENT}, + {KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {TOG_OUT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {440.0*pow(2.0,(31)/12.0), 12}, + {440.0*pow(2.0,(28)/12.0), 8}, + {440.0*pow(2.0,(19)/12.0), 8}, + {440.0*pow(2.0,(24)/12.0), 8}, + {440.0*pow(2.0,(28)/12.0), 20} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); + +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 12: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + break; + case 13: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + break; + case 14: + if (record->event.pressed) { + return MACRO( D(E), D(R), D(F), D(V), D(O), D(L), U(E), U(R), U(F), U(V), U(O), U(L), END ); + } + break; + } + return MACRO_NONE; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // stops the tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} +#endif + + diff --git a/keyboards/planck/keymaps/yang/Makefile b/keyboards/planck/keymaps/yang/Makefile new file mode 100644 index 000000000..6b18762fa --- /dev/null +++ b/keyboards/planck/keymaps/yang/Makefile @@ -0,0 +1,10 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +AUDIO_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/yang/WS2812-wiring.jpg b/keyboards/planck/keymaps/yang/WS2812-wiring.jpg Binary files differnew file mode 100644 index 000000000..2c65cd283 --- /dev/null +++ b/keyboards/planck/keymaps/yang/WS2812-wiring.jpg diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h new file mode 100644 index 000000000..feb5a1190 --- /dev/null +++ b/keyboards/planck/keymaps/yang/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/planck/keymaps/yang/keymap.c b/keyboards/planck/keymaps/yang/keymap.c new file mode 100644 index 000000000..0ce849050 --- /dev/null +++ b/keyboards/planck/keymaps/yang/keymap.c @@ -0,0 +1,90 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _LW 3 +#define _RS 4 +#define _RGB 5 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DV] = { /* Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_RGB] = { /* RGBLIGHT */ + {KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, + {KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + +} +}; + +/*enum function_id { + +};*/ + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_RGB, KC_SPC), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + + } +} diff --git a/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg b/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg Binary files differnew file mode 100644 index 000000000..c636b9a83 --- /dev/null +++ b/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c new file mode 100644 index 000000000..3ebd82af4 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_brett.c @@ -0,0 +1,42 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS, + TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP, + MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, 0, 0, TRNS, PGDN), +[2] = KEYMAP( /* LOWER */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, + TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c new file mode 100644 index 000000000..d4ec987ab --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_dotcom.c @@ -0,0 +1,34 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + FN1, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, LBRC, + LCTL, BSLS, QUOT, LALT, FN22, SPC, LEFT, UP, DOWN, RGHT, RBRC), +[1] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, TRNS, TRNS, TRNS, + TRNS, FN18, FN19, FN22, EQL, MINS, FN20, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, VOLD, VOLU, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c new file mode 100644 index 000000000..4237949d5 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_jack.c @@ -0,0 +1,50 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Jack */ + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + RSFT, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Jack colemak */ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, BSPC, + ESC, A, R, S, T, D, H, N, E, I, O, QUOT, + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, ENT, + FN3, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[2] = KEYMAP( /* Jack RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), +[3] = KEYMAP( /* Jack LOWER */ + FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c new file mode 100644 index 000000000..b8251c857 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_joe.c @@ -0,0 +1,83 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Joe qwerty */ + ESC, Q, W, E, R, T, Y, U, I, O, P, MINS, + BSPC, A, S, D, F, G, H, J, K, L, SCLN, ENTER, + FN7, Z, X, C, V, B, N, M, COMM, DOT, SLSH, QUOT, + LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, UP, DOWN, RGHT), +[1] = KEYMAP( /* Joe colemak */ + ESC, Q, W, F, P, G, J, L, U, Y, SCLN, MINS, + BSPC, A, R, S, T, D, H, N, E, I, O, ENTER, + FN7, Z, X, C, V, B, K, M, COMM, DOT, SLSH, QUOT, + LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, UP, DOWN, RGHT), +[2] = KEYMAP( /* Joe UPPER */ + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + DEL, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, MENU, CAPS, INS, PSCR, TRNS, FN5, FN6, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, FN0, FN26, FN27, FN28, FN29), +[3] = KEYMAP( /* Joe LOWER */ + GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN8, FN9, FN30, + BSPC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, + BSLS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, TRNS, EQL, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, HOME, PGUP, PGDN, END), +[4] = KEYMAP( /* Joe LOWER + UPPER */ + FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, SLEP, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MUTE, VOLD, VOLU, MPLY), +}; + +enum macro_id { + M_Q0, + M_Q1, + M_Q2 +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [1] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [5] = ACTION_MODS_KEY(MOD_LCTL, KC_PGUP), + [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PGDN), + + /* tab on tap, shift on hold */ + [7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_TAB), + + [8] = ACTION_MACRO(M_Q0), + [9] = ACTION_MACRO(M_Q1), + + [26] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_LEFT), + [27] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_UP), + [28] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_DOWN), + [29] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_RGHT), + + [30] = ACTION_MACRO(M_Q2), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + switch (id) { + case M_Q0: + /* :( | ): */ + return event.pressed ? + MACRO( D(LSFT), T(P), T(9), T(SPC), T(SPC), T(0), T(P), U(LSFT), T(LEFT), T(LEFT), T(LEFT), END ) : + MACRO_NONE; + case M_Q1: + /* (: | :) */ + return event.pressed ? + MACRO( D(LSFT), T(9), T(P), T(SPC), T(SPC), T(P), T(0), U(LSFT), T(LEFT), T(LEFT), T(LEFT), END ) : + MACRO_NONE; + case M_Q2: + /* :) */ + return event.pressed ? + MACRO( D(LSFT), T(P), T(0), U(LSFT), END ) : + MACRO_NONE; + } + return MACRO_NONE; +} diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c new file mode 100644 index 000000000..196b2d777 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_matthew.c @@ -0,0 +1,70 @@ +// by Matthew Pepers - https://github.com/pepers + +/* grid planck layout - modified programmer dvorak +,-----------------------------------------------------------------------------------------------. +| pause | @ | | | ^ | | | | | * | # | $ | del | +| esc | ; : | , < | . > | P | Y | F | G | G | C | R | bkspc | +| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| & | / | { | ( | [ | = | ! | ] | ) | } | \ | + | +| ` ~ | A | O | E | U | I | D | H | T | N | S | - _ | +| % | 7 | 5 | 3 | 1 | 9 | 0 | 2 | 4 | 6 | 8 | ? | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| | | | | | | | | | | | prtsc | +| tab | ' " | Q | J | K | X | B | M | W | V | Z | retrn | +| | | | | | | | | | | | insrt | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| | | | | | | | | | | | | +| lctrl | lgui | lalt | ralt | lower | shift | space | raise | left | down | up | right | +| | | | | | | | | home | pgdn | pgup | end | +`-----------------------------------------------------------------------------------------------' +*/ + +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: dvorak */ + [0] = KEYMAP_GRID( ESC, SCLN, COMM, DOT, P, Y, F, G, C, R, L, BSPC, \ + GRV, A, O, E, U, I, D, H, T, N, S, MINS, \ + TAB, QUOT, Q, J, K, X, B, M, W, V, Z, ENT, \ + LCTL, LGUI, LALT, RALT, FN1, LSFT, SPC, FN2, LEFT, DOWN, UP, RGHT), + + /* 1: lower (FN1) */ + [1] = KEYMAP_GRID( F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, \ + FN17, 7, 5, 3, 1, 9, 0, 2, 4, 6, 8, FN18, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, INS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END), + + /* 2: raise (FN2) */ + [2] = KEYMAP_GRID(PAUS, FN19, FN20, FN21, TRNS, TRNS, TRNS, TRNS, FN22, FN23, FN24, DEL, \ + FN10, SLSH, FN11, FN12, LBRC, EQL, FN13, RBRC, FN14, FN15, BSLS, FN16, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // lower Fn layer + [2] = ACTION_LAYER_MOMENTARY(2), // raise Fn layer + + // lower row1 + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // ? + + // raise row0 + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLASH), // | + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + + // raise row1 + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRACKET), // { + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRACKET), // } + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_EQUAL), // + +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_mitch.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_mitch.c new file mode 100644 index 000000000..e5a86b402 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_mitch.c @@ -0,0 +1,49 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3, + ESC, DEL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( + GRV, GRV, FN22, FN19, FN10, TRNS, TRNS, 7, 8, 9, 0, BSPC, + TRNS, LBRC, RBRC, FN23, FN24, TRNS, TRNS, 4, 5, 6, TRNS, BSLS, + TRNS, MINS, FN20, EQL, FN21, TRNS, TRNS, 1, 2, 3, TRNS, ENT, + TRNS, TRNS, TRNS, TRNS, TRNS, SPC, FN1, TRNS, PGDN, PGUP, TRNS), +[2] = KEYMAP( + FN26, FN10, FN11, FN12, FN13, FN14, FN15, FN17, FN18, FN19, FN10, DEL, + TRNS, TRNS, MUTE, VOLD, VOLU, TRNS, BSPC, FN14, FN15, FN16, TRNS, FN25, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN11, FN12, FN13, TRNS, ENT, + TRNS, TRNS, TRNS, TRNS, FN2, ENT, TRNS, TRNS, PGDN, PGUP, TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // Switch layer raise + [2] = ACTION_LAYER_MOMENTARY(2), // Switch layer lower + + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), // Right shift serves as Enter on tap + + // Numeric shift modifiers + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + + // Other shift modifiers + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _ + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~ + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // | + + // Switch windows in app + [26] = ACTION_MODS_KEY(MOD_LGUI, KC_GRV), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c new file mode 100644 index 000000000..f0be4b030 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_nathan.c @@ -0,0 +1,153 @@ +// Author: Nathan Ross Powell <nathanrospowell@gmail.com> +// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c + +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: main layer + * ,-----------------------------------------------------------------------. + * |Tab | q | w | e | r | t | y | u | i | o | p | BS | + * |-----------------------------------------------------------------------| + * |Ctrl | a | s | d | f | g | h | j | k | l | ; | Ret | + * |-----------------------------------------------------------------------| + * |Shift| z | x | c | v | b | n | m | [ | ( | { | < | + * |-----------------------------------------------------------------------| + * |Meta | \ | / | Alt |Lower|Space|Space|Upper|Left |Down | Up |Right| + * `-----------------------------------------------------------------------' + */ + [0] = KEYMAP_GRID( + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, + RSFT, Z, X, C, V, B, N, M, LBRC, FN10, FN11, FN12, + LGUI, BSLS, SLSH, LALT, FN0, SPC, SPC, FN1, LEFT, DOWN, UP, RGHT), + + /* 1: fn left/lower layer + * The top row are Visual Studio combos: + * 'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line' + * 2nd row are key combos: + * 'ctrl-alt-delete', 'ctrl-shift-escape' + * 3rd row are macros keys: + * 'P0' - 'P5' execute a script on Windows machines + * ,-----------------------------------------------------------------------. + * | ESC | F5 | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del | + * |-----------------------------------------------------------------------| + * | |C/A/D|C/S/E| Ins |Print|Pause|SLock|Num0 |Num4 |Num5 |Num6 |Num= | + * |-----------------------------------------------------------------------| + * | | P0 | P1 | P2 | P3 | P4 | P5 |Num. |Num1 |Num2 |Num3 |Num/ | + * |-----------------------------------------------------------------------| + * | |User | | | | | | |Home |PgDn |PgUp | End | + * `-----------------------------------------------------------------------' + */ + [1] = KEYMAP_GRID( + ESC, F5, F9, F10, F11, FN30, FN31, NLCK, P7, P8, P9, DEL, + TRNS, FN16, FN17, INS, PSCR, PAUS, SLCK, P0, P4, P5, P6, PEQL, + TRNS, FN2, FN3, FN4, FN5, FN6, FN7, PDOT, P1, P2, P3, PSLS, + TRNS, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END ), + + /* 2: fn right/raise layer + * ,-----------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 |F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-----------------------------------------------------------------------| + * | | ! | @ | # | $ | % | ^ | & | * | - | + | = | + * |-----------------------------------------------------------------------| + * | | _ | ' | " | ` | ~ | , | . | ] | ) | } | > | + * |-----------------------------------------------------------------------| + * | |NextT|PrevT| | | | Esc | |Mute |Vol- |Vol+ | P/P | + * `-----------------------------------------------------------------------' + */ + [2] = KEYMAP_GRID( + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + TRNS, FN18, FN19, FN20, FN21, FN22, FN23, FN24, FN25, MINS, FN26, PAST, + TRNS, FN27, QUOT, FN28, GRV, FN29, COMM, DOT, RBRC, FN13, FN14, FN15, + TRNS, MNXT, MPRV, TRNS, TRNS, TRNS, ESC, TRNS, MUTE, VOLD, VOLU, MPLY ), +}; + +enum macro_id { + M_P0, + M_P1, + M_P2, + M_P3, + M_P4, + M_P5, + M_USERNAME +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer + [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer + // Program macros + [2] = ACTION_MACRO(M_P0), + [3] = ACTION_MACRO(M_P1), + [4] = ACTION_MACRO(M_P2), + [5] = ACTION_MACRO(M_P3), + [6] = ACTION_MACRO(M_P4), + [7] = ACTION_MACRO(M_P5), + [8] = ACTION_MACRO(M_USERNAME), + // Braces + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // < + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // > + // Combo + [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete + [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_ESC), // Ctrl+Shft+Escape + // Symbols + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _ + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // " + [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~ + // Debugging + [30] = ACTION_MODS_KEY(MOD_LSFT, KC_F11), // Step into + [31] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F10), // Set cursor to line + }; + +// Run a script and pass a key number to it. This is Windows specific and the script needs to be on your path. +// *open run dialog* keypress.py [PRG_NUM] +#define ADD_PYTHON_PROGRAM_ON_WIN( PRG_NUM ) MACRO( D(LGUI), T(R), U(LGUI), W(100), T(K), T(E), T(Y), T(P), T(R), T(E), T(S), T(S), T(DOT), T(P), T(Y), T(SPC), T(PRG_NUM), END ) +// *return* +#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END ) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + switch (id) { + case M_P0: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 0 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P1: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 1 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P2: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 2 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P3: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 3 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P4: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 4 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P5: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 5 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_USERNAME: + return event.pressed ? + MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) : + MACRO_NONE; + } + return MACRO_NONE; +} diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c new file mode 100644 index 000000000..51d45be75 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_paul.c @@ -0,0 +1,49 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Paul */ + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + ESC, LCTL, LALT, LGUI, FN2, SPC, FN3, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Paul FN */ + TRNS, TRNS, TRNS, FN8, FN9, TRNS, TRNS, TRNS, TRNS, MUTE, VOLD, VOLU, + FN1, TRNS, TRNS, HOME, END, TRNS, TRNS, TRNS, TRNS, MPRV, MPLY, MNXT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, RGHT), +[2] = KEYMAP( /* Paul LOWER */ + FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +[3] = KEYMAP( /* Paul RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN3, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn1 overlay (FN) + [2] = ACTION_LAYER_MOMENTARY(2), // to Fn2 overlay (LOWER) + [3] = ACTION_LAYER_MOMENTARY(3), // to Fn3 overlay (RAISE) + + [8] = ACTION_MODS_KEY(MOD_LSFT, KC_HOME), + [9] = ACTION_MODS_KEY(MOD_LSFT, KC_END), + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_peasant.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_peasant.c new file mode 100644 index 000000000..f6493e33a --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_peasant.c @@ -0,0 +1,51 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Native */ + ESC, Q, W, E, R, T, Y, U, I, O, P, FN2, + BSPC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + TAB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + DEL, LCTL, NO, LSFT, LALT, SPC, NO, LEFT, DOWN, UP, RGHT), + [1] = KEYMAP( /* QWERTY->PHOTOSHOP */ + DELETE, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, FN1, + O, G, S, U, T, FN27, F21, F10, F11, F7, F8, F9, + TAB, FN4, FN5, FN6, F1, FN7, F18, F19, F23, F20, F22, FN9, + COMM, DOT, FN10, FN11, FN3, SPC, FN12, F2, FN8, F3, F14), + [2] = KEYMAP( /* 2: FN3 PHOTOSHOP */ + ESC, FN25, FN26, NO, NO, NO, NO, NO, NO, NO, NO, NO, + NO, NO, NO, NO, NO, NO, NO, NO, NO, FN19, FN20, FN21, + C, NO, FN22, FN5, NO, FN23, NO, NO, NO, NO, FN13, NO, + FN14, FN15, FN16, FN17, FN3, SPC, FN18, NO, NO, F24, NO), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout + [2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets + [3] = ACTION_LAYER_ON_OFF(2), // Photoshop function layer + + [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK + [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse + [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M), // marquee select + [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC), // fill + [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X), // warp + [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12), // merge all new layer + [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), // zoom out + [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H), // RBG sliders + [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S), // save + [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5), // layer mask from transparancy + [14] = ACTION_MODS_KEY(MOD_LALT, KC_LBRC), // prev layer + [15] = ACTION_MODS_KEY(MOD_LALT, KC_RBRC), // next layer + [16] = ACTION_MODS_KEY(MOD_LCTL, KC_EQL), // zoom in + [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H), // HSV sliders + [18] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F11), // save as PNG + [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7), // gaussian blur + [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8), // motion blur + [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X), // liquify filter + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // prev layer blending + [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LALT, KC_N), // normal layer blending + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // next layer blending + [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z), // step back + [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y), // step forward + [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R), // rasterize + +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c new file mode 100644 index 000000000..f721716fd --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_reed.c @@ -0,0 +1,74 @@ +#include "keymap.h" + +/* + * BUILD: + * Simply run the command below in the keyboards/planck directory + * to build against this keymap + * + * make KEYMAP=reed COMMON_KEYMAP=true + * + * + * DETAILS: + * + * This layout works off of Jack's layout, making some changes that I + * feel significantly improve the function of the keyboard. Major changes + * include adding a "gaming mode" that will allow users to still access + * the number keys 1 through 4 easily for games that require it. Also + * included is the ability to use the tap/hold function for easy use of + * right shift and thumb shift with their tapped companions. + * + */ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP_GRID( /* Reed */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, + LCTL, CAPS, LALT, LGUI, FN2, FN7, SPC, FN1, LEFT, DOWN, UP, RGHT), + +[1] = KEYMAP_GRID( /* Reed EXTREME GAMING */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, + LCTL, 1, 2, 3, 4, SPC, FN2, FN1, LEFT, DOWN, UP, RGHT), + +[2] = KEYMAP_GRID( /* Reed RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), + +[3] = KEYMAP_GRID( /* Reed LOWER */ + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL, + TRNS, TRNS, INS, HOME, PGUP, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, TRNS, DEL, END, PGDN, F11, F12, F13, TRNS, VOLD, VOLU, TRNS, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - RAISE + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - LOWER + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + // Actions for the tap/hold modifiers listed above + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPC), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c new file mode 100644 index 000000000..fb0eb7dad --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_sean.c @@ -0,0 +1,53 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Matrix Dvorak */ + QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L, + A, O, E, U, I, ESC, BSPC, D, H, T, N, S, + SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z, + LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + + [1] = KEYMAP( /* Matrix Qwerty */ + Q, W, E, R, T, QUOT, EQL, Y, U, I, O, P, + A, S, D, F, G, ESC, BSPC, H, J, K, L, SCLN, + Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH, + LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + + [2] = KEYMAP( /* fn1 lower */ + F1, F2, F3, F4, F5, NO, NO, F6, F7, F8, F9, F10, + 1, 2, 3, 4, 5, F18, DEL, 6, 7, 8, 9, 0, + FN3, FN4, FN28, GRV, MINS, TRNS, INS, BSLS, LBRC, RBRC, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END), + + [3] = KEYMAP( /* fn2 raise */ + MRWD, MPLY, MFFD, NO, NO, FN21, FN22, EJCT, PWR, LSFT,PAUSE, RSFT, + FN11, FN12, FN13, FN14, FN15, F18, DEL, FN16, FN17, FN18, FN19, FN20, + FN3, FN4, FN28, FN23, FN24, TRNS, INS, FN25, FN26, FN27, MPRV, MNXT, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, NO, VOLD, VOLU, MUTE), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay LOWER + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay RAISE + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [27] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c new file mode 100644 index 000000000..2191758c8 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_shane.c @@ -0,0 +1,98 @@ +#include "keymap.h" +#include "action_layer.h" +#include "action.h" +#include "action_util.h" + +/* + Shane's Planck Layout + http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441 +*/ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_AND_SWAP( /* Base */ + TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, BSPC, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, + /*ALPHA*/FN3, /*HYPER*/ /*SUPER*/LGUI, /*META*/LALT, LCTL, FN2, FN6, FN1, LEFT, DOWN, UP, RGHT), + [2] = KEYMAP_AND_SWAP( /* More modifiers */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RCTL, RALT, RGUI, TRNS), + [4] = KEYMAP_AND_SWAP( /* WASD */ + TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, LEFT, DOWN, RIGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + [6] = KEYMAP_AND_SWAP( /* Raise/FN1 */ + FN23, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, EQL, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, BSLS, TRNS, + PAUS, TRNS, TRNS, TRNS, TRNS, BSPC, TRNS, MUTE, PGUP, PGDN, MNXT), + [8] = KEYMAP_AND_SWAP( /* Lower/FN2 */ + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN19, FN20, TRNS, + TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN24, FN25, LBRC, RBRC, TRNS, TRNS, + FN4, TRNS, TRNS, TRNS, TRNS, ENT, TRNS, MPLY, VOLD, VOLU, MPRV), +}; + +enum function_id { + SPACE_FN, +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case SPACE_FN: + if (record->event.pressed) { + // Change the keyboard maps. + // Whatever even layer's are on, turn on the odd one's too. + for (uint8_t i = 0; i < 9; i += 2) { + if (layer_state & (1UL << i)) + layer_on(i + 1); + } + layer_on(1); + } else { + // turn off all the even layers. + for (uint8_t i = 0; i < 9; i += 2) + layer_off(i + 1); + + if (record->tap.count != 0) { + // Space was tapped rather than used like a modifier. + // So send a space up and down event. + add_key(KC_SPC); + send_keyboard_report(); + del_key(KC_SPC); + send_keyboard_report(); + } + } + break; + } +} + + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(6), // to fist Fn overlay + [2] = ACTION_LAYER_MOMENTARY(8), // to second Fn overlay + [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers + [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [6] = ACTION_FUNCTION_TAP(SPACE_FN), + + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +};
\ No newline at end of file diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c new file mode 100644 index 000000000..8058c2e10 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_simon.c @@ -0,0 +1,44 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Jack */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, DOT, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SCLN, DEL, + LCTL, ENT, LALT, CAPS, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Jack RAISE */ + TRNS, F1, F2, F3, F4, NO, FN11, FN9, FN12, NO, FN14, TRNS, + TRNS, F5, F6, F7, F8, FN16, SLSH, MINS, EQL, LBRC, FN8, TRNS, + TRNS, F9, F10, F11, F12, F15, F16, FN22, SCLN, MINS, QUOT, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +[2] = KEYMAP( /* Jack LOWER */ + FN22, 1, 2, 3, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + TRNS, 4, 5, 6, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, 7, 8, 9, 0, FN28, FN15, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + + [8] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + [9] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c new file mode 100644 index 000000000..64d0b7403 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_tim.c @@ -0,0 +1,44 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + LCTL, LALT, DEL, LGUI, FN2, SPC, FN1, F2, F5, F9, F12), +[2] = KEYMAP( /* RAISE */ + TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), +[3] = KEYMAP( /* LOWER */ + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + [29] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), +}; diff --git a/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c b/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c new file mode 100644 index 000000000..22326ebe4 --- /dev/null +++ b/keyboards/planck/old_keymap_files/common_keymaps/keymap_wilba.c @@ -0,0 +1,56 @@ +#include "keymap.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Wilba */ + FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Wilba Alternate */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), +[2] = KEYMAP( /* Wilba LOWER */ + TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, + TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS, + TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), +[3] = KEYMAP( /* Wilba RAISE */ + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // LOWER + [2] = ACTION_LAYER_MOMENTARY(3), // RAISE + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _ + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~ + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // | + + [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), + + [27] = ACTION_BACKLIGHT_TOGGLE(), + [28] = ACTION_BACKLIGHT_INCREASE(), + [29] = ACTION_BACKLIGHT_DECREASE() + +}; diff --git a/keyboards/planck/old_keymap_files/keymap_common.c b/keyboards/planck/old_keymap_files/keymap_common.c new file mode 100644 index 000000000..db4f18a95 --- /dev/null +++ b/keyboards/planck/old_keymap_files/keymap_common.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "keymap.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboards/planck/old_keymap_files/keymap_common.h b/keyboards/planck/old_keymap_files/keymap_common.h new file mode 100644 index 000000000..d46df9287 --- /dev/null +++ b/keyboards/planck/old_keymap_files/keymap_common.h @@ -0,0 +1,129 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +// #include "print.h" +#include "debug.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +// MIT Layout +/* + * ,-----------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ +} + +// Grid Layout +/* + * ,-----------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ +#define KEYMAP_GRID( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ +} + +#define KEYMAP_REVERSE( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ + ) { \ + { KC_##K0B, KC_##K0A, KC_##K09, KC_##K08, KC_##K07, KC_##K06, KC_##K05, KC_##K04, KC_##K03, KC_##K02, KC_##K01, KC_##K00 }, \ + { KC_##K1B, KC_##K1A, KC_##K19, KC_##K18, KC_##K17, KC_##K16, KC_##K15, KC_##K14, KC_##K13, KC_##K12, KC_##K11, KC_##K10 }, \ + { KC_##K2B, KC_##K2A, KC_##K29, KC_##K28, KC_##K27, KC_##K26, KC_##K25, KC_##K24, KC_##K23, KC_##K22, KC_##K21, KC_##K20 }, \ + { KC_##K3B, KC_##K3A, KC_##K39, KC_##K38, KC_##K37, KC_##K35, KC_##K35, KC_##K34, KC_##K33, KC_##K32, KC_##K31, KC_##K30 }, \ + } + +#define KEYMAP_AND_REVERSE(args...) KEYMAP(args), KEYMAP_REVERSE(args) + +#define KEYMAP_SWAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ + ) { \ + { KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05 }, \ + { KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15 }, \ + { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25 }, \ + { KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K35, KC_##K35, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34 }, \ +} + +#define KEYMAP_AND_SWAP(args...) KEYMAP(args), KEYMAP_SWAP(args) + +/* + Keymap for the Planck 48 key variant. + */ +#define KEYMAP_48( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }, \ +} + + +#endif diff --git a/keyboards/planck/out.txt b/keyboards/planck/out.txt new file mode 100644 index 000000000..644a6a777 --- /dev/null +++ b/keyboards/planck/out.txt @@ -0,0 +1,66 @@ +-------- begin -------- +avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2 +Copyright (C) 2014 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +Compiling: ../../keyboards/planck/planck.c [32;01m[OK][0m +Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c [33;01m[WARNINGS][0m + | + | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro': + | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration] + | breathing_speed_set(2); + | ^ + | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration] + | breathing_pulse(); + | ^ + | +Compiling: ../../quantum/quantum.c [32;01m[OK][0m +Compiling: ../../quantum/keymap.c [32;01m[OK][0m +Compiling: ../../quantum/keycode_config.c [32;01m[OK][0m +Compiling: ../../quantum/matrix.c [32;01m[OK][0m +Compiling: ../../quantum/audio/audio.c [32;01m[OK][0m +Compiling: ../../quantum/audio/voices.c [32;01m[OK][0m +Compiling: ../../quantum/audio/luts.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/lufa.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/descriptor.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/host.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/keyboard.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_tapping.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_macro.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_layer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/print.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/debug.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/suspend.c [32;01m[OK][0m +Assembling: ../../tmk_core/common/avr/xprintf.S [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/timer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/bootloader.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/magic.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/eeconfig.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/mousekey.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/command.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/backlight.c [32;01m[OK][0m +Linking: .build/planck_experimental.elf [31;01m[ERRORS][0m + | + | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro': + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set' + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse' + | collect2.exe: error: ld returned 1 exit status + | diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c new file mode 100644 index 000000000..8d70bb4e5 --- /dev/null +++ b/keyboards/planck/planck.c @@ -0,0 +1,9 @@ +#include "planck.h" + +void matrix_init_kb(void) { + // Turn status LED on + DDRE |= (1<<6); + PORTE |= (1<<6); + + matrix_init_user(); +}
\ No newline at end of file diff --git a/keyboards/planck/planck.h b/keyboards/planck/planck.h new file mode 100644 index 000000000..8cfee5d1c --- /dev/null +++ b/keyboards/planck/planck.h @@ -0,0 +1,39 @@ +#ifndef PLANCK_H +#define PLANCK_H + +#ifdef SUBPROJECT_rev3 + #include "rev3.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4.h" +#endif + +#include "quantum.h" + +#define PLANCK_MIT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ +} + +#define PLANCK_GRID( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} + +#endif diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md new file mode 100644 index 000000000..f89fdeb93 --- /dev/null +++ b/keyboards/planck/readme.md @@ -0,0 +1,31 @@ +Planck keyboard firmware +====================== +DIY/Assembled compact ortholinear 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. + +### Notable forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) diff --git a/keyboards/planck/rev3/Makefile b/keyboards/planck/rev3/Makefile new file mode 100644 index 000000000..3ed1445e4 --- /dev/null +++ b/keyboards/planck/rev3/Makefile @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/rev3/config.h b/keyboards/planck/rev3/config.h new file mode 100644 index 000000000..cc37874e8 --- /dev/null +++ b/keyboards/planck/rev3/config.h @@ -0,0 +1,8 @@ +#ifndef REV3_CONFIG_H +#define REV3_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0003 + +#endif diff --git a/keyboards/planck/rev3/rev3.c b/keyboards/planck/rev3/rev3.c new file mode 100644 index 000000000..9ccd1d880 --- /dev/null +++ b/keyboards/planck/rev3/rev3.c @@ -0,0 +1 @@ +#include "rev3.h"
\ No newline at end of file diff --git a/keyboards/planck/rev3/rev3.h b/keyboards/planck/rev3/rev3.h new file mode 100644 index 000000000..628951d97 --- /dev/null +++ b/keyboards/planck/rev3/rev3.h @@ -0,0 +1,6 @@ +#ifndef REV3_H +#define REV3_H + +#include "../planck.h" + +#endif
\ No newline at end of file diff --git a/keyboards/planck/rev4/Makefile b/keyboards/planck/rev4/Makefile new file mode 100644 index 000000000..ed09f85a4 --- /dev/null +++ b/keyboards/planck/rev4/Makefile @@ -0,0 +1,5 @@ +AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/rev4/config.h b/keyboards/planck/rev4/config.h new file mode 100644 index 000000000..98189fba7 --- /dev/null +++ b/keyboards/planck/rev4/config.h @@ -0,0 +1,8 @@ +#ifndef REV4_CONFIG_H +#define REV4_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0004 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/rev4/rev4.c b/keyboards/planck/rev4/rev4.c new file mode 100644 index 000000000..98a75d2ed --- /dev/null +++ b/keyboards/planck/rev4/rev4.c @@ -0,0 +1 @@ +#include "rev4.h"
\ No newline at end of file diff --git a/keyboards/planck/rev4/rev4.h b/keyboards/planck/rev4/rev4.h new file mode 100644 index 000000000..e4cf1800b --- /dev/null +++ b/keyboards/planck/rev4/rev4.h @@ -0,0 +1,6 @@ +#ifndef REV4_H +#define REV4_H + +#include "../planck.h" + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/Makefile b/keyboards/preonic/Makefile new file mode 100644 index 000000000..08e9205cb --- /dev/null +++ b/keyboards/preonic/Makefile @@ -0,0 +1,73 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h new file mode 100644 index 000000000..3fb978c2f --- /dev/null +++ b/keyboards/preonic/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Preonic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/preonic/keymaps/0xdec/Makefile b/keyboards/preonic/keymaps/0xdec/Makefile new file mode 100644 index 000000000..6600e3689 --- /dev/null +++ b/keyboards/preonic/keymaps/0xdec/Makefile @@ -0,0 +1,21 @@ +# Build Options + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/0xdec/README.md b/keyboards/preonic/keymaps/0xdec/README.md new file mode 100644 index 000000000..603d3d455 --- /dev/null +++ b/keyboards/preonic/keymaps/0xdec/README.md @@ -0,0 +1,30 @@ +Ergonomic Colemak Keymap +======================== +An ergonomically optimized Colemak keymap for the grid-layout Preonic + +Modes +---------- + +#### Colemak + +> Base layer + +- All alphanumerics and symbols available on the base layer + +---------- + +#### Game + +> QWERTY layout for use with games or number entry + +- Standard QWERTY layout +- Integrated right-hand numpad in phone layout + +---------- + +#### Function (Raise) + +> Functions and mode switching + +- Turns NEIO into arrow cluster, with nav cluster below (Home, Page Down, Page Up, End) +- Reset key at lower left (Esc) diff --git a/keyboards/preonic/keymaps/0xdec/config.h b/keyboards/preonic/keymaps/0xdec/config.h new file mode 100644 index 000000000..5fc9b6f34 --- /dev/null +++ b/keyboards/preonic/keymaps/0xdec/config.h @@ -0,0 +1,10 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// Number of backlight levels +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 5 + +#endif diff --git a/keyboards/preonic/keymaps/0xdec/keymap.c b/keyboards/preonic/keymaps/0xdec/keymap.c new file mode 100644 index 000000000..6c4b8a6fa --- /dev/null +++ b/keyboards/preonic/keymaps/0xdec/keymap.c @@ -0,0 +1,173 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Layer names +#define _COLEMAK 0 +#define _GAME 1 +#define _RAISE 2 + +enum preonic_keycodes { + COLEMAK = SAFE_RANGE, + GAME, + RAISE +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | = | Q | W | F | P | G | J | L | U | Y | [ | ] | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | - | A | R | S | T | D | H | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ; | Z | X | C | V | B | K | M | , | . | / | ENTER| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ESC | ALT | GUI | SHIFT| CTRL | BKSP | SPACE| RAISE| SHIFT| | DEL | TAB | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_BSLS}, + {KC_EQL ,KC_Q ,KC_W ,KC_F ,KC_P ,KC_G ,KC_J ,KC_L ,KC_U ,KC_Y ,KC_LBRC,KC_RBRC}, + {KC_MINS,KC_A ,KC_R ,KC_S ,KC_T ,KC_D ,KC_H ,KC_N ,KC_E ,KC_I ,KC_O ,KC_QUOT}, + {KC_SCLN,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_K ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_ENT }, + {KC_ESC ,KC_LALT,KC_LGUI,KC_LSFT,KC_LCTL,KC_BSPC,KC_SPC ,RAISE ,KC_RSFT,_______,KC_DEL ,KC_TAB } +}, + +/* Game + * ,-----------------------------------------------------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 |NUM LK| ÷ | × | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+ + * | TAB | Q | W | E | R | T | Y | U | 1 | 2 | 3 | + | + * |------+------+------+------+------+------+------+------+------+------+------+------+ + * | CTRL | A | S | D | F | G | H | J | 4 | 5 | 6 | = | + * |------+------+------+------+------+------+------+------+------+------+------+------+ + * | SHIFT| Z | X | C | V | B | N | M | 7 | 8 | 9 | ENTER| + * |------+------+------+------+------+------+------+------+------+------+------+------+ + * | | ALT | GUI | SPACE| CTRL | BKSP | SPACE| RAISE| , | 0 | . | TAB | + * `-----------------------------------------------------------------------------------' + */ +[_GAME] = { + {KC_ESC ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_6 ,KC_7 ,KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS}, + {KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_Y ,KC_U ,KC_P1 ,KC_P2 ,KC_P3 ,KC_PPLS}, + {KC_LCTL,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_H ,KC_J ,KC_P4 ,KC_P5 ,KC_P6 ,KC_PEQL}, + {KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_N ,KC_M ,KC_P7 ,KC_P8 ,KC_P9 ,KC_PENT}, + {XXXXXXX,KC_LALT,KC_LGUI,KC_SPC ,KC_LCTL,KC_BSPC,KC_SPC ,RAISE ,KC_PCMM,KC_P0 ,KC_PDOT,KC_TAB } +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | SLEEP| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 |PRTSCR| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | SYM | F11 | F12 | |AU TOG| VOL+ |BL INC|COLMAK| GAME | MUSIC| MENU |SCRLCK| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | PREV | STOP | PLAY | NEXT | VOL- |BL DEC| LEFT | DOWN | UP | RIGHT| PAUSE| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | BACK | STOP | RFRSH| FRWRD| MUTE |BL TOG| HOME | PGDN | PGUP | END |INSERT| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | RESET| | | | | DEL | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_SLEP,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_PSCR}, + {XXXXXXX,KC_F11 ,KC_F12 ,XXXXXXX,AU_TOG ,KC_VOLU,BL_INC ,COLEMAK,GAME ,MU_TOG ,KC_MENU,KC_SLCK}, + {KC_CAPS,KC_MPRV,KC_MSTP,KC_MPLY,KC_MNXT,KC_VOLD,BL_DEC ,KC_LEFT,KC_DOWN,KC_UP ,KC_RGHT,KC_PAUS}, + {XXXXXXX,KC_WBAK,KC_WSTP,KC_WREF,KC_WFWD,KC_MUTE,BL_TOGG,KC_HOME,KC_PGDN,KC_PGUP,KC_END ,KC_INS }, + {RESET ,_______,_______,_______,_______,KC_DEL ,_______,_______,_______,_______,_______,_______} +} + +}; + + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_game[][2] = { + {NOTE_E6, 10} ,{NOTE_E6, 10} ,{NOTE_REST, 10} ,{NOTE_E6, 10} , + {NOTE_REST, 10} ,{NOTE_C6, 10} ,{NOTE_E6, 10} ,{NOTE_REST, 10} , + {NOTE_G6, 10} ,{NOTE_REST, 30}, + {NOTE_G5, 10} ,{NOTE_REST, 30} +}; +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +void startup_user() { + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} +void shutdown_user() { + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) { + music_scale_user(); +} +void music_scale_user(void) { + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case GAME: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_game, false, STACCATO); + #endif + persistant_default_layer_set(1UL<<_GAME); + } + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + break; + default: + return true; + break; + } + + return false; +}; diff --git a/keyboards/preonic/keymaps/CMD-Preonic/README.md b/keyboards/preonic/keymaps/CMD-Preonic/README.md new file mode 100644 index 000000000..2b80c2b3a --- /dev/null +++ b/keyboards/preonic/keymaps/CMD-Preonic/README.md @@ -0,0 +1,77 @@ +CMD-Preonic +=================== +The CMD project seeks to improve productivity by optimizing usage of the left hand via clever use of the function layers. + +>Note: This project is currently optimized for grid layout, and has not been confirmed to work 100% on MIT layout, although it is expected to work correctly. + +---------- + +Modes +------------- + +#### QWERTY + +>CMD-Qwerty is very similar to the default Preonic with a few key differences: + + - Dual-role Raise/Enter Key at Caps Lock position. -Don't need to take your hand off the mouse to submit URLs + - Space_Function under left space (Grid layout) -Don't need to take your thumb off of the spacebar to use lower. + - Dedicated arrow keys replaced with ( - , = , [ , and ] ) - big improvement for programmers who are used to fn layer. + +---------- + +#### Game + +> Disables extra features to facilitate easier usage of the Preonic while gaming. this mode is toggled in the adjust layer. + + - Dual Role Function key becomes Caps Lock. + - Space_Function disabled and replaced with normal spacebar. + - Windows Key disabled. + +---------- + +#### Numpad + +> Enables left-hand numpad + + - Left-side numpad + - Can be toggled on in Adjust layer (under . key) + +---------- + +#### Arrow - (Lower) + +> Makes arrow keys easily accessible to Left Hand, and much more. + + - Arrow keys at WASD, Backspace at Q, Delete at E. + - Media Keys near arrow cluster, mute at A. + - Web Nav keys. + - Mouse cluster at YGHJ. + - Numpad in right side of board. + - Can be toggled on in Adjust layer (Under , key) + +---------- + +#### Function- (Raise) + +> Basic Functions. Open Keys for customization. + + - Turns WASD into Navigation cluster (Home, End, Page up and Page Down) + - Pok3r style right hand arrow cluster for accessibility (familiar for many users.) + - Doubles as shift key for top row numbers. + - Print Screen, Insert, etc. + +---------- + +#### Adjust- (Raise + Lower) + +> Switch Modes + + - Default modes moved to the left and new layer toggle modes located to the right. + - Sleep and Wake keys added. + - Reset button moved under Spacebar(s). + +Notes: +------------- + +Please feel free to reach out to Commandlinedesign@gmail.com with suggestions. +Special Thanks to Jack for QMK firmware and the Preonic! diff --git a/keyboards/preonic/keymaps/CMD-Preonic/keymap.c b/keyboards/preonic/keymaps/CMD-Preonic/keymap.c new file mode 100644 index 000000000..5d217e261 --- /dev/null +++ b/keyboards/preonic/keymaps/CMD-Preonic/keymap.c @@ -0,0 +1,332 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _GAME 3 +#define _ARROW 12 +#define _NUMPAD 13 +#define _LOWER 14 +#define _RAISE 15 +#define _ADJUST 16 + +// Macro name shortcuts +#define QWERTY M(_QWERTY) +#define COLEMAK M(_COLEMAK) +#define DVORAK M(_DVORAK) +#define GAME M(_GAME) +#define ARROW M(_ARROW) +#define NUMPAD M(_NUMPAD) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define M_BL 5 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space | Raise| - | = | [ | ] | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH}, + {LT(_RAISE, KC_ENT), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, LT(_LOWER, KC_SPC), KC_SPC, RAISE, KC_MINUS, KC_EQUAL, KC_LBRC, KC_RBRC} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space | Raise| - | = | [ | ] | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, _______}, + {_______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space | Raise| - | = | [ | ] | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, _______}, + {_______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, _______}, + {_______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* GAME + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | XXX | Lower | Space | Raise| - | = | [ | ] | + * `-----------------------------------------------------------------------------------' + */ +[_GAME] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH}, + {KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {_______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* NUMPAD + * ,-----------------------------------------------------------------------------------. + * | Esc | / | * | - | 4 | 5 | 6 | 7 | 8 | 9 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | 7 | 8 | 9 | + | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | 4 | 5 | 6 | + | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | 1 | 2 | 3 | Enter| V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | 0 | 0 | . | Enter| Lower| Space | Raise| - | = | [ | ] | + * `-----------------------------------------------------------------------------------' + */ +[_NUMPAD] = { + {KC_ESC, KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_P7, KC_P8, KC_P9, KC_PPLS, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_P4, KC_P5, KC_P6, KC_PPLS, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_P1, KC_P2, KC_P3, KC_PENT, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_P0, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, _______, _______}, +}, +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Mute | BkSpc| Up | Del | Forwd| MBtn1| MUp| MBtn2| / | 7 | 8 | 9 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Left | Down | Right| Refr MLeft| MDn |MRight| * | 4 | 5 | 6 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Vol+| Prev | Play | Next | Back | MWDn| MBtn3| MWUp | - | 1 | 2 | 3 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Vol- | | | | | | | + | Enter| 0 | . | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL}, + {KC_MUTE, KC_BSPC, KC_UP, KC_DEL, KC_WWW_FORWARD, KC_BTN1, KC_MS_U, KC_BTN2, KC_PSLS, KC_P7, KC_P8, KC_P9}, + {_______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_WWW_REFRESH, KC_MS_L, KC_MS_D, KC_MS_R, KC_PAST, KC_P4, KC_P5, KC_P6}, + {KC_VOLU, KC_MPRV, KC_MPLY, KC_MNXT, KC_WWW_BACK, KC_WH_D, KC_BTN3, KC_WH_U, KC_PMNS, KC_P1, KC_P2, KC_P3}, + {KC_VOLD, _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PENT, KC_P0, KC_PDOT} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Bksp | PgUp | Del | | | | PgUp | Up | PgDn | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Home | PgDn | End | | | Home | Left | Down | Right| ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Pause| Ins | | | Print|Screen| End | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {_______, KC_BSPC, KC_PGUP, KC_DEL, _______, _______, _______, KC_PGUP, KC_UP, _______, _______, _______}, + {_______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______}, + {_______, KC_PAUSE, KC_INS, _______, KC_PSCR, KC_PSCR, _______, KC_END, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | |qwerty|ColMak|Dvorak| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |AGNorm|AGSwap| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud On|AudOff|MidiOn|MdiOff| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus On|MusOff| Sleep| Wake | Arrow| Game |NUMPAD| | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | Reset | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______}, + {_______, RESET, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, MI_ON, MI_OFF, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, KC_SYSTEM_SLEEP, KC_SYSTEM_WAKE, ARROW, GAME, NUMPAD, _______, _______}, + {_______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______} +} + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE +float start_up[][2] = { + {440.0*pow(2.0,(14)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8}, + {440.0*pow(2.0,(18)/12.0), 20}, + {440.0*pow(2.0,(26)/12.0), 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + break; + case _COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + break; + case _DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + break; + case _GAME: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_GAME); + } + break; + case _NUMPAD: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_NUMPAD); + } + break; + case _ARROW: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_LOWER); + } + break; + case _LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case _RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case M_BL: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(start_up, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE + +void play_goodbye_tone() +{ + PLAY_NOTE_ARRAY(goodbye, false, 0); + _delay_ms(150); +} + +#endif diff --git a/keyboards/preonic/keymaps/CMD-Preonic/makefile b/keyboards/preonic/keymaps/CMD-Preonic/makefile new file mode 100644 index 000000000..2f7787e86 --- /dev/null +++ b/keyboards/preonic/keymaps/CMD-Preonic/makefile @@ -0,0 +1,23 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/default/Makefile b/keyboards/preonic/keymaps/default/Makefile new file mode 100644 index 000000000..581e08cd0 --- /dev/null +++ b/keyboards/preonic/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c new file mode 100644 index 000000000..78b4997a8 --- /dev/null +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -0,0 +1,280 @@ +#include "preonic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/preonic/keymaps/default/readme.md b/keyboards/preonic/keymaps/default/readme.md new file mode 100644 index 000000000..e911968dd --- /dev/null +++ b/keyboards/preonic/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default Preonic layout - largely based on the Planck's
\ No newline at end of file diff --git a/keyboards/preonic/preonic.c b/keyboards/preonic/preonic.c new file mode 100644 index 000000000..889c3fc8f --- /dev/null +++ b/keyboards/preonic/preonic.c @@ -0,0 +1,10 @@ +#include "preonic.h" + +void matrix_init_kb(void) { + + // Turn status LED on + DDRE |= (1<<6); + PORTE |= (1<<6); + + matrix_init_user(); +};
\ No newline at end of file diff --git a/keyboards/preonic/preonic.h b/keyboards/preonic/preonic.h new file mode 100644 index 000000000..0e0b101e4 --- /dev/null +++ b/keyboards/preonic/preonic.h @@ -0,0 +1,36 @@ +#ifndef PREONIC_H +#define PREONIC_H + +#include "quantum.h" + +#define PREONIC_MIT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, k45, k45, k47, k48, k49, k4a, k4b } \ +} + +#define PREONIC_GRID( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b } \ +} + +#endif diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md new file mode 100644 index 000000000..f0be255a0 --- /dev/null +++ b/keyboards/preonic/readme.md @@ -0,0 +1,25 @@ +Preonic keyboard firmware +====================== +DIY/Assembled compact ortholinear 50% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/preonic folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap, create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/readme.md b/keyboards/readme.md new file mode 100644 index 000000000..f6c90b1f6 --- /dev/null +++ b/keyboards/readme.md @@ -0,0 +1,45 @@ +# Included Keyboards +QMK runs on a diverse range of keyboards. Some of these keyboards are officially supported and see constant community contributions, while others are part of the repository for historical reasons. + +## Official QMK Keyboards + +These keyboards are manufactured by the maintainers of QMK. + +### Ortholinear Keyboards - Jack Humbert + +What makes OLKB keyboards shine is a combo of lean aesthetics, compact size, and killer tactile feel. These are available through [olkb.com](http://olkb.com) as well as through [Massdrop](http://massdrop.com) from time to time, as easy to assemble kits. + +* [Planck](/keyboards/planck/) - A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine. +* [Preonic](/keyboards/preonic/) - Like the Planck, but bigger. 50%. +* [Atomic](/keyboards/atomic/) - Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_. That is the Atomic. A 60% keyboard. + +### ErgoDox EZ - Erez Zukerman + +Made in Taiwan using advanced robotic manufacturing, the ErgoDox EZ is a fully-assembled, premium ergonomic keyboard. Its split design allows you to place both halves shoulder width, and its custom-made wrist rests and tilt/tent kit make for incredibly comfortable typing. Available on [ergodox-ez.com](https://ergodox-ez.com). + +* [ErgoDox EZ](/keyboards/ergodox/) - Our one and only product. Yes, it's that awesome. Comes with either printed or blank keycaps, and 7 different keyswitch types. + +### Clueboard - Zach White + +Designed and built in Felton, CA, Clueboards keyboard emphasize quality and locally sourced components, available on [clueboard.co](http://clueboard.co) + +* [Clueboard](/keyboards/clueboard/) - The 66% custom keyboard. +* [Cluepad](/keyboards/cluepad/) - A mechanical numpad with QMK superpowers. + + +## Community-supported QMK Keyboards + +These keyboards are part of the QMK repository, but their manufacturers are not official maintainers of the repository. + +* [alps64](/keyboards/alps64/) — A 60% keyboard for Alps keyswitches. +* [arrow_pad](/keyboards/arrow_pad) — A custom creation by IBNobody. +* [atreus](/keyboards/atreus) — Made by Technomancy. +* [bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard. +* [gh60](/keyboards/gh60) — A 60% Geekhack community-driven project. +* [hhkb](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK. +* [jd45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe. +* [kc60](/keyboards/kc60) — A programmable Chinese-made keyboard, lost in the mists of time. +* [phantom](/keyboards/phantom) — A tenkeyless kit by Teel, also from Geekhack. +* [retro_refit](/keyboards/retro_refit) — Another creation by IBNobody. +* [satan](/keyboards/satan) — A GH60 variant. +* [sixkeyboard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys. diff --git a/keyboards/retro_refit/Makefile b/keyboards/retro_refit/Makefile new file mode 100644 index 000000000..2dd8cc5f7 --- /dev/null +++ b/keyboards/retro_refit/Makefile @@ -0,0 +1,74 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +ifndef QUANTUM_DIR + include ../../Makefile +endif + diff --git a/keyboards/retro_refit/config.h b/keyboards/retro_refit/config.h new file mode 100644 index 000000000..f2194e550 --- /dev/null +++ b/keyboards/retro_refit/config.h @@ -0,0 +1,123 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nobody +#define PRODUCT retro_refit +#define DESCRIPTION Retro Refit + +/* key matrix size */ +#define MATRIX_ROWS 11 +#define MATRIX_COLS 8 + +// See note in retro_refit.h for an explanation of how this matrix is wired up +#define MATRIX_ROW_PINS { D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, D2, D3, C7, D5 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ +#define FORCE_NKRO + +/* + * Magic key options + * These options allow the magic key functionality to be changed. This is useful + * if your keyboard/keypad is missing keys and you want magic key support. + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* remap magic keys */ +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +#define MAGIC_KEY_LOCK BSLS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/retro_refit/keymaps/default/keymap.c b/keyboards/retro_refit/keymaps/default/keymap.c new file mode 100644 index 000000000..405402d5e --- /dev/null +++ b/keyboards/retro_refit/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "retro_refit.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = + KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, NLCK, SLCK, PSCR, PAUS, \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, HOME, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, PGUP, \ + BSLS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, PGDN, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, END, \ + LCTL, LGUI, LALT, SPC, INS, DEL, LEFT, DOWN, RGHT), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/retro_refit/readme.md b/keyboards/retro_refit/readme.md new file mode 100644 index 000000000..b01a1a9ca --- /dev/null +++ b/keyboards/retro_refit/readme.md @@ -0,0 +1,24 @@ +retro_refit keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: +``` +$ make KEYMAP=[default|jack|<name>] +``` +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboards/retro_refit/retro_refit.c b/keyboards/retro_refit/retro_refit.c new file mode 100644 index 000000000..3d610eba3 --- /dev/null +++ b/keyboards/retro_refit/retro_refit.c @@ -0,0 +1,47 @@ +#include "retro_refit.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + // Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS) + DDRD |= (1<<6); + PORTD |= (1<<6); + + matrix_init_user(); +}; + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRD |= (1<<0); + PORTD &= ~(1<<0); + } else { + // Hi-Z + DDRD &= ~(1<<0); + PORTD &= ~(1<<0); + } + if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // output low + DDRD |= (1<<1); + PORTD &= ~(1<<1); + } else { + // Hi-Z + DDRD &= ~(1<<1); + PORTD &= ~(1<<1); + } + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { + // output low + DDRC |= (1<<6); + PORTC &= ~(1<<6); + } else { + // Hi-Z + DDRC &= ~(1<<6); + PORTC &= ~(1<<6); + } + + led_set_user(usb_led); +};
\ No newline at end of file diff --git a/keyboards/retro_refit/retro_refit.h b/keyboards/retro_refit/retro_refit.h new file mode 100644 index 000000000..109acdc39 --- /dev/null +++ b/keyboards/retro_refit/retro_refit.h @@ -0,0 +1,38 @@ +#ifndef RETRO_REFIT_H +#define RETRO_REFIT_H + +#include "quantum.h" + +// This macro is an example of using a non-standard row-column matrix. The +// keyboard in question had 11 rows and 8 columns, but the rows were not all +// horizontal, and the columns were not all vertical. For example, row 2 +// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and +// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", +// "Left Alt", "Up Arrow", and "Down Arrow". +// +// The macro makes programming the keys easier and in a more straight-forward +// manner because it realigns the keys into a 6x15 sensible keyboard layout +// instead of the obtuse 11x8 matrix. + +#define KEYMAP( \ + K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \ + K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \ + K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \ + K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \ + K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \ + K10, K06, K25, K07, K86, K85, K95, K90, K93 \ +) { \ +{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \ +{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \ +{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \ +{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \ +{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \ +{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \ +{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \ +{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \ +{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \ +{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \ +{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile new file mode 100644 index 000000000..a0879fc9c --- /dev/null +++ b/keyboards/satan/Makefile @@ -0,0 +1,70 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h new file mode 100644 index 000000000..7e9f91cc8 --- /dev/null +++ b/keyboards/satan/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER SATAN +#define PRODUCT GH60 +#define DESCRIPTION QMK keyboard firmware for Satan GH60 with WS2812 support + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/satan/controller.jpg b/keyboards/satan/controller.jpg Binary files differnew file mode 100644 index 000000000..76ffa4500 --- /dev/null +++ b/keyboards/satan/controller.jpg diff --git a/keyboards/satan/keymaps/default/Makefile b/keyboards/satan/keymaps/default/Makefile new file mode 100644 index 000000000..2a7ff2779 --- /dev/null +++ b/keyboards/satan/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c new file mode 100644 index 000000000..3806137e7 --- /dev/null +++ b/keyboards/satan/keymaps/default/keymap.c @@ -0,0 +1,98 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______, _______), + #else + KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/default/readme.md b/keyboards/satan/keymaps/default/readme.md new file mode 100644 index 000000000..c366147df --- /dev/null +++ b/keyboards/satan/keymaps/default/readme.md @@ -0,0 +1 @@ +# default Satan GH60 layout diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c new file mode 100644 index 000000000..8181955cf --- /dev/null +++ b/keyboards/satan/keymaps/poker/keymap.c @@ -0,0 +1,116 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), + +/* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | + * |-----------------------------------------------------------| + * | |Left|Down|Rig| | | | | | |Home|PgUp| | + * |-----------------------------------------------------------| + * | | |App| | | |Vdn|Vup|Mute|End|PgDn| | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS,KC_TRNS, KC_UP, KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap _RL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_RL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/sethbc/Makefile b/keyboards/satan/keymaps/sethbc/Makefile new file mode 100644 index 000000000..2a7ff2779 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/sethbc/keymap.c b/keyboards/satan/keymaps/sethbc/keymap.c new file mode 100644 index 000000000..82c779081 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/keymap.c @@ -0,0 +1,85 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +// Fillers to make layering more clear +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \ | ~ | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|bksp | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift| fn | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_HHKB( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL), + +[_FL] = KEYMAP_HHKB( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, \ + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_DEL, \ + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, \ + KC_CAPS, _______, RGB_TOG,RGB_MOD,RGB_HUI, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_DEL, \ + _______, KC_VOLD, RGB_HUD,RGB_SAI,RGB_SAD, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + _______, RGB_VAI,RGB_VAD,_______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/keymaps/sethbc/readme.md b/keyboards/satan/keymaps/sethbc/readme.md new file mode 100644 index 000000000..ed0eb8701 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/readme.md @@ -0,0 +1,3 @@ +# sethbc's Satan GH60 layout + +HHKB style split right shift and split backspace. Largely based on the HHKB layout. diff --git a/keyboards/satan/keymaps/stanleylai/config.h b/keyboards/satan/keymaps/stanleylai/config.h new file mode 100644 index 000000000..7f4bb441c --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/config.h @@ -0,0 +1,15 @@ +#include "../../config.h" + +// Backlight configuration +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 3 + +// Underlight configuration +#undef RGBLED_NUM +#define RGBLED_NUM 6 // Number of LEDs +#undef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 8 +#undef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 8 +#undef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/satan/keymaps/stanleylai/keymap.c b/keyboards/satan/keymaps/stanleylai/keymap.c new file mode 100644 index 000000000..623427e97 --- /dev/null +++ b/keyboards/satan/keymaps/stanleylai/keymap.c @@ -0,0 +1,84 @@ +#include "satan.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RGBL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// See base_layer.png and rgb_layer.png for layout reference + +// Base Default Layer +// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions. +[_BL] = KEYMAP_HHKB( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(_FL), \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + +// Function layer +[_FL] = KEYMAP_HHKB( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \ + KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + +// RGB Layer +[_RGBL] = KEYMAP_HHKB( + #ifdef RGBLIGHT_ENABLE + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #else + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/satan/pinout.txt b/keyboards/satan/pinout.txt new file mode 100644 index 000000000..d1ad4ac88 --- /dev/null +++ b/keyboards/satan/pinout.txt @@ -0,0 +1 @@ +For WS2812B LED strip support, connect DIN from strip to PE2 on ATmega32u4 controller (see reference image controller.jpg)
\ No newline at end of file diff --git a/keyboards/satan/power.jpg b/keyboards/satan/power.jpg Binary files differnew file mode 100644 index 000000000..0514eef5c --- /dev/null +++ b/keyboards/satan/power.jpg diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md new file mode 100644 index 000000000..aaf189746 --- /dev/null +++ b/keyboards/satan/readme.md @@ -0,0 +1,4 @@ +Satan GH60 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/satan/satan.c b/keyboards/satan/satan.c new file mode 100644 index 000000000..d2c5d5c20 --- /dev/null +++ b/keyboards/satan/satan.c @@ -0,0 +1,30 @@ +#include "satan.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h new file mode 100644 index 000000000..513446bf3 --- /dev/null +++ b/keyboards/satan/satan.h @@ -0,0 +1,69 @@ +#ifndef SATAN_H +#define SATAN_H + +#include "quantum.h" + +/* Satan GH60 matrix layout + * ,-----------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | + * |-----------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |-----------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |-----------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | + * |-----------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `-----------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \ + {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \ + {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \ +} + +/* Satan HHKB matrix layout + * ,------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 | + * |------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | + * |------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | + * |------------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | + * |------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | + * `------------------------------------------------------------' + */ + +#define KEYMAP_HHKB( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ + k40, k41, k42, k45, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \ + {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c, k4d} \ +} + + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/sixkeyboard/Makefile b/keyboards/sixkeyboard/Makefile new file mode 100644 index 000000000..6f273064a --- /dev/null +++ b/keyboards/sixkeyboard/Makefile @@ -0,0 +1,75 @@ + + +SRC = matrix.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega16u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +CUSTOM_MATRIX = yes + +ifndef QUANTUM_DIR + include ../../Makefile +endif + diff --git a/keyboards/sixkeyboard/config.h b/keyboards/sixkeyboard/config.h new file mode 100644 index 000000000..bf58bb2b7 --- /dev/null +++ b/keyboards/sixkeyboard/config.h @@ -0,0 +1,115 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER techkeys.us +#define PRODUCT sixkeykeyboard +#define DESCRIPTION A little 6-key macro pad + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 3 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ +#define FORCE_NKRO + +/* + * Magic key options + * These options allow the magic key functionality to be changed. This is useful + * if your keyboard/keypad is missing keys and you want magic key support. + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* remap magic keys */ +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK BSLS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/sixkeyboard/keymaps/default/keymap.c b/keyboards/sixkeyboard/keymaps/default/keymap.c new file mode 100644 index 000000000..641ed790e --- /dev/null +++ b/keyboards/sixkeyboard/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "sixkeyboard.h" +#include "matrix.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = { + {KC_A, KC_B, KC_C}, + {KC_D, KC_E, KC_F} + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + // jump to bootloaer when all keys are pressed + if (matrix_get_row(0) == 0b111 && matrix_get_row(1) == 0b111) { + clear_keyboard(); + bootloader_jump(); + } +};
\ No newline at end of file diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c new file mode 100644 index 000000000..ed1b70e28 --- /dev/null +++ b/keyboards/sixkeyboard/matrix.c @@ -0,0 +1,130 @@ +/* + +Note for ErgoDox EZ customizers: Here be dragons! +This is not a file you want to be messing with. +All of the interesting stuff for you is under keymaps/ :) +Love, Erez + +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "sixkeyboard.h" + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + + DDRC &= ~(1<<7); + PORTC |= (1<<7); + DDRB &= ~(1<<7 | 1<<5); + PORTB |= (1<<7 | 1<<5); + DDRD &= ~(1<<6 | 1<<4 | 1<<1); + PORTD |= (1<<6 | 1<<4 | 1<<1); + + matrix_init_kb(); + +} + +uint8_t matrix_scan(void) +{ + matrix[0] = (PINC&(1<<7) ? 0 : (1<<0)) | (PINB&(1<<7) ? 0 : (1<<1)) | (PINB&(1<<5) ? 0 : (1<<2)); + matrix[1] = (PIND&(1<<6) ? 0 : (1<<0)) | (PIND&(1<<1) ? 0 : (1<<1)) | (PIND&(1<<4) ? 0 : (1<<2)); + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + diff --git a/keyboards/sixkeyboard/readme.md b/keyboards/sixkeyboard/readme.md new file mode 100644 index 000000000..7d78a0cae --- /dev/null +++ b/keyboards/sixkeyboard/readme.md @@ -0,0 +1,18 @@ +# Techkeys SixKeyBoard + +[Get one here!](http://techkeys.us/collections/accessories/products/sixkeyboard) + +The schematic is like this: + +``` + switches leds +,--+--+--. ,--+--+--. +|C7|B7|B5| |C6|B6|B4| ++--+--+--+ +--+--+--+ +|D6|D1|D4| |D5|D2|D3| +`--+--+--' `--+--+--' +``` + +The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit. + +There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.
\ No newline at end of file diff --git a/keyboards/sixkeyboard/sixkeyboard.c b/keyboards/sixkeyboard/sixkeyboard.c new file mode 100644 index 000000000..85190f616 --- /dev/null +++ b/keyboards/sixkeyboard/sixkeyboard.c @@ -0,0 +1,30 @@ +#include "sixkeyboard.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + DDRC |= (1<<4); + PORTC &= ~(1<<4); + + + DDRC |= (1<<6); + PORTC &= ~(1<<6); + + DDRB |= (1<<6); + PORTB &= ~(1<<6); + + DDRB |= (1<<4); + PORTB &= ~(1<<4); + + DDRD |= (1<<5); + PORTD &= ~(1<<5); + + DDRD |= (1<<2); + PORTD &= ~(1<<2); + + DDRD |= (1<<3); + PORTD &= ~(1<<3); + + matrix_init_user(); +};
\ No newline at end of file diff --git a/keyboards/sixkeyboard/sixkeyboard.h b/keyboards/sixkeyboard/sixkeyboard.h new file mode 100644 index 000000000..66f53bf7e --- /dev/null +++ b/keyboards/sixkeyboard/sixkeyboard.h @@ -0,0 +1,18 @@ +#ifndef SIXKEYBOARD_H +#define SIXKEYBOARD_H + +#include "quantum.h" + +// This macro is an example of using a non-standard row-column matrix. The +// keyboard in question had 11 rows and 8 columns, but the rows were not all +// horizontal, and the columns were not all vertical. For example, row 2 +// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and +// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", +// "Left Alt", "Up Arrow", and "Down Arrow". +// +// The macro makes programming the keys easier and in a more straight-forward +// manner because it realigns the keys into a 6x15 sensible keyboard layout +// instead of the obtuse 11x8 matrix. + + +#endif
\ No newline at end of file |
