diff options
Diffstat (limited to 'layouts/community/ortho_3x10')
| -rw-r--r-- | layouts/community/ortho_3x10/wanleg/config.h | 19 | ||||
| -rw-r--r-- | layouts/community/ortho_3x10/wanleg/keymap.c | 5 | ||||
| -rw-r--r-- | layouts/community/ortho_3x10/wanleg/readme.md | 8 | ||||
| -rw-r--r-- | layouts/community/ortho_3x10/wanleg/rules.mk | 2 |
4 files changed, 27 insertions, 7 deletions
diff --git a/layouts/community/ortho_3x10/wanleg/config.h b/layouts/community/ortho_3x10/wanleg/config.h index 6719a4591..dc2245448 100644 --- a/layouts/community/ortho_3x10/wanleg/config.h +++ b/layouts/community/ortho_3x10/wanleg/config.h @@ -2,8 +2,25 @@ //QMK DFU settings (ProMicro boards) // set top left key as bootloader mode escape key on Gherkin -#if defined(KEYBOARD_gherkin) +#if defined(KEYBOARD_40percentclub_gherkin) && !defined(FLIP) #define QMK_LED B0 #define QMK_ESC_OUTPUT B4 // usually COL #define QMK_ESC_INPUT F7 // usually ROW #endif + +//change gherkin orientation (i.e. move USB port from right side to left side) +#if defined(KEYBOARD_40percentclub_gherkin) && defined(FLIP) +//need to fix QMKdfu setting: +#define QMK_ESC_OUTPUT B6 // usually COL +#define QMK_ESC_INPUT D0 // usually ROW +#define QMK_LED B0 + +//need to undefine standard 4x4 array before defining alternate ProMicro array +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS +//standard config: +//#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +//#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } +#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } +#define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 } +#endif diff --git a/layouts/community/ortho_3x10/wanleg/keymap.c b/layouts/community/ortho_3x10/wanleg/keymap.c index 44be300a4..96d36eb31 100644 --- a/layouts/community/ortho_3x10/wanleg/keymap.c +++ b/layouts/community/ortho_3x10/wanleg/keymap.c @@ -26,4 +26,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______________Gherkin_ETC_2_______________ ), +[_FN] = LAYOUT_ortho_3x10_wrapper( + _______________Gherkin_FN_0________________, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), }; diff --git a/layouts/community/ortho_3x10/wanleg/readme.md b/layouts/community/ortho_3x10/wanleg/readme.md index 8696cccf6..255e19c2a 100644 --- a/layouts/community/ortho_3x10/wanleg/readme.md +++ b/layouts/community/ortho_3x10/wanleg/readme.md @@ -1,4 +1,4 @@ - + # Gherkin Wanleg Layout This is the layout I came up with to preserve a standard QWERTY 104 key ANSI layout as much as possible, in as few layers as possible for a 30 key board. Here are the two Tap Dance keys I've set up for this board: @@ -47,9 +47,9 @@ The instructions below have been adapted from https://www.reddit.com/r/olkb/comm | Arduino | ProMicro | | --- | --- | | 10 | RST | -| 11 | 16 | -| 12 | 14 | -| 13 | 15 | +| 11 (MOSI) | 16 | +| 12 (MISO) | 14 | +| 13 (SCK) | 15 | | GND | GND | | 5V | VCC | diff --git a/layouts/community/ortho_3x10/wanleg/rules.mk b/layouts/community/ortho_3x10/wanleg/rules.mk index 90841d2ab..efd11f7f8 100644 --- a/layouts/community/ortho_3x10/wanleg/rules.mk +++ b/layouts/community/ortho_3x10/wanleg/rules.mk @@ -1,3 +1 @@ -SWAP_HANDS_ENABLE = no - BOOTLOADER = qmk-dfu
\ No newline at end of file |