diff options
Diffstat (limited to 'layouts/community/ortho_4x12/wanleg/readme.md')
| -rw-r--r-- | layouts/community/ortho_4x12/wanleg/readme.md | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/layouts/community/ortho_4x12/wanleg/readme.md b/layouts/community/ortho_4x12/wanleg/readme.md new file mode 100644 index 000000000..2f89d1de6 --- /dev/null +++ b/layouts/community/ortho_4x12/wanleg/readme.md @@ -0,0 +1,24 @@ +# Let's Split Flashing +(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`) +## Make the QMK DFU .hex +`make lets_split/rev2:wanleg:production dfu=qmk` + +## Burning EEPROM settings and Firmware +Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it. +**Burn Left Side With QMK DFU and Firmware** +`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a` + +**Burn Right Side With QMK DFU and Firmware** +`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a` + +Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step. + +## Using QMK DFU +Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with +`make lets_split/rev2:<keymap>:dfu dfu=qmk` +The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` + +--- +# JJ40 +## To Do +- [ ] Mousekeys not working with Userspace for some reason (jj40 only)
\ No newline at end of file |