diff options
Diffstat (limited to 'ps2_usb')
| -rw-r--r-- | ps2_usb/Makefile | 58 | ||||
| -rw-r--r-- | ps2_usb/Makefile.pjrc_usart | 58 | ||||
| -rw-r--r-- | ps2_usb/Makefile.vusb | 92 | ||||
| -rw-r--r-- | ps2_usb/README | 116 | ||||
| -rw-r--r-- | ps2_usb/README.vusb | 37 | ||||
| -rw-r--r-- | ps2_usb/config_pjrc.h | 59 | ||||
| -rw-r--r-- | ps2_usb/config_pjrc_usart.h | 91 | ||||
| -rw-r--r-- | ps2_usb/config_vusb.h | 133 | ||||
| -rw-r--r-- | ps2_usb/keymap.c | 379 | ||||
| -rw-r--r-- | ps2_usb/led.c | 33 | ||||
| -rw-r--r-- | ps2_usb/matrix.c | 452 | ||||
| -rw-r--r-- | ps2_usb/usbconfig.h | 378 |
12 files changed, 0 insertions, 1886 deletions
diff --git a/ps2_usb/Makefile b/ps2_usb/Makefile deleted file mode 100644 index 515e6899f..000000000 --- a/ps2_usb/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# Makefile for PJRC Teensy -# - - -# Target file name (without extension). -TARGET = ps2_usb_pjrc - -# Directory common source filess exist -TOP_DIR = .. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = main.c \ - keymap.c \ - matrix.c \ - led.c \ - ps2.c - -CONFIG_H = config_pjrc.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Build Options -# *Comment out* to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options -------------------------- -PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex - - - -include $(TOP_DIR)/protocol/pjrc.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk diff --git a/ps2_usb/Makefile.pjrc_usart b/ps2_usb/Makefile.pjrc_usart deleted file mode 100644 index 2e570e710..000000000 --- a/ps2_usb/Makefile.pjrc_usart +++ /dev/null @@ -1,58 +0,0 @@ -# -# Makefile for PJRC Teensy -# - - -# Target file name (without extension). -TARGET = ps2_usb_pjrc_usart - -# Directory common source filess exist -TOP_DIR = .. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = main.c \ - keymap.c \ - matrix.c \ - led.c \ - ps2_usart.c - -CONFIG_H = config_pjrc_usart.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Build Options -# *Comment out* to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options -------------------------- -PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex - - - -include $(TOP_DIR)/protocol/pjrc.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk diff --git a/ps2_usb/Makefile.vusb b/ps2_usb/Makefile.vusb deleted file mode 100644 index d85f1d55d..000000000 --- a/ps2_usb/Makefile.vusb +++ /dev/null @@ -1,92 +0,0 @@ -# -# Makefile for V-USB -# - - -# Target file name (without extension). -TARGET = ps2_usb_vusb - -# Directory common source filess exist -TOP_DIR = .. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = main.c \ - keymap.c \ - matrix.c \ - led.c \ - ps2_usart.c - -CONFIG_H = config_vusb.h - - -# V-USB debug level: To use ps2_usart.c level must be 0 -# ps2_usart.c requires USART to receive PS/2 signal. -OPT_DEFS = -DDEBUG_LEVEL=0 - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -#MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 -MCU = atmega168 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 20000000 - - -# Build Options -# comment out to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover -NO_UART = yes # UART is unavailable - - - -#---------------- Programming Options -------------------------- -AVRDUDE = avrdude -# Type: avrdude -c ? to get a full listing. -AVRDUDE_PROGRAMMER = usbasp -AVRDUDE_PORT = -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - -PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - - -include $(TOP_DIR)/protocol/vusb.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk diff --git a/ps2_usb/README b/ps2_usb/README deleted file mode 100644 index c10393e5e..000000000 --- a/ps2_usb/README +++ /dev/null @@ -1,116 +0,0 @@ -PS/2 to USB keyboard converter -============================== -This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2. -This will works on USB AVR(ATMega32U4, AT90USB) or V-USB. - - -Features --------- -Mouse keys - You can emulates mouse move and button click using keyboard. -System/Media control - You can sends Power event, Volume down/up and Mute. -USB NKRO(actually 120KRO+8Modifiers) - You can tolggles NKRO feature. -Keymap customization - You can customize keymaps easily by editing source code. See keymap.c. - - -PS/2 signal handling implementations ------------------------------------- -Following three methods are used to implement PS/2 signal handling. -a. Simple and stupid wait & read loop(intensive use of cycles) - This is implemented with (expected) portable C code for reference. See ps2.c. -b. Interrupt driven - See ps2_intr.c -c. Using USART hardware module(no cycle needed) - This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter. - See ps2_usart.c. - - -Build Converter ---------------- -Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock). -For a. Simple and stupid and b. Interrupt implementaion: - By default Clock is on PF0 and Data on PF1. - You can change this pin configuration by editing config_pjrc.h. - In this photo Vcc is yellow, GND is green, Data is red and Clock is black. - http://img17.imageshack.us/img17/7243/201101181933.jpg -For c. USART implementation: - In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2. - - -Build Frimware --------------- -1. Edit Makefile for build options and MCU setting. - Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0. -2. make - Just type 'make' in a terminal. - Use '-f Makefile.pjrc_intr' option to use b. Interrupt. - Use '-f Makefile.pjrc_usart' option to use c. USART. - Use '-f Makefile.vusb' option to build V-USB converter. -3. program with Teensy Loader. - http://www.pjrc.com/teensy/loader.html - - -Demonstration of Features -------------------------- -In default configuration, you can try several keymaps, mousekeys and USB NKRO. -Use following magic key combinations to enable some features. - -keymaps and NKRO: - Magic+0: Qwerty with mousekeys(default) - Magic+1: Qwerty without mousekeys - Magic+2: Colemak - Magic+3: Dvorak - Magic+4: Workman - Magic+N: toggles NKRO/6KRO(6KRO by default) - Magic+Esc: sends Power Event(Power button) - - where Magic=(LShift+RShift) or (LControl+RShift) - -Fn layer function: - Fn0+(hjkl): Mousekey move(vi cursor like) - Fn0+(yuio): Mouse wheel(left,down,up,right) - Fn0+space: Mouse left button - Fn0+(mnb): Mouse buttons(m=left, n=right, b=middle) - Fn0+(zxc): Media control(Volup, Voldown, Mute) - Fn1+(hjkl): Cursor move(vi cursor like) - Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End) - - where Fn0=;, Fn1=/ - - -Keymap ------- -You can change a keymap by editing code of keymap.c like following. -How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h. -To define keymap layer switching may needs a bit of your effort at this time. - - /* Default Layer: plain keymap - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| - * `---' `---------------' `---------------' `---------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | - * |-----------------------------------------------------------| `-----------' |-----------| +| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - -EOF diff --git a/ps2_usb/README.vusb b/ps2_usb/README.vusb deleted file mode 100644 index c92871bcd..000000000 --- a/ps2_usb/README.vusb +++ /dev/null @@ -1,37 +0,0 @@ -V-USB Support -============= -You can also use this converter on ATmega(168/328) with V-USB instead of Teensy. -The converter on V-USB lacks some features for now: USB NKRO and System/Media control. - -To build a firmware use Makefile.vusb instead of Makefile. - - -Circuit -------- - +---+ +---------------+ -USB GND | | ATmega168 | -=== C3 | | -5V <-------+--------+---|Vcc,AVCC | PS/2 - R1 | | ==== -D- <----+--+-----R2-----|INT1 RXD|------->DATA -D+ <----|---+----R3-----|INT0 XCK|------->CLOCK - Z1 Z2 | | ->5V -GND<----+---+--+--+-----|GND | ->GND - | | | | - | C2-+--|XTAL1 | - | X1 | | - +--C3-+--|XTAL2 | - +---------------+ -R1: 1.5K Ohm -R2,R3: 68 Ohm -Z1,Z2: Zenner 3.6V -C1,C2: 22pF -C3: 0.1uF -X1: Crystal 20MHz(16MHz/12MHz) - - -This is my V-USB converter on breadboard. -[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG] - - -EOF diff --git a/ps2_usb/config_pjrc.h b/ps2_usb/config_pjrc.h deleted file mode 100644 index 883ffab27..000000000 --- a/ps2_usb/config_pjrc.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* controller configuration */ -#include "controller_teensy.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6512 -#define MANUFACTURER t.m.k. -#define PRODUCT PS/2 keyboard converter -#define DESCRIPTION convert PS/2 keyboard to USB - - -/* matrix size */ -#define MATRIX_ROWS 32 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ - keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ -) - - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - - -/* PS/2 lines */ -#define PS2_CLOCK_PORT PORTF -#define PS2_CLOCK_PIN PINF -#define PS2_CLOCK_DDR DDRF -#define PS2_CLOCK_BIT 0 -#define PS2_DATA_PORT PORTF -#define PS2_DATA_PIN PINF -#define PS2_DATA_DDR DDRF -#define PS2_DATA_BIT 1 - -#endif diff --git a/ps2_usb/config_pjrc_usart.h b/ps2_usb/config_pjrc_usart.h deleted file mode 100644 index 83ddbf770..000000000 --- a/ps2_usb/config_pjrc_usart.h +++ /dev/null @@ -1,91 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* controller configuration */ -#include "controller_teensy.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6513 -#define MANUFACTURER t.m.k. -#define PRODUCT PS/2 keyboard converter(USART) -#define DESCRIPTION convert PS/2 keyboard to USB - - -/* matrix size */ -#define MATRIX_ROWS 32 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ - keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ -) - - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - - -/* PS/2 lines */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - - -// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge -// set DDR of CLOCK as input to be slave -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ - PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ - UCSR1C = ((1 << UMSEL10) | \ - (3 << UPM10) | \ - (0 << USBS1) | \ - (3 << UCSZ10) | \ - (0 << UCPOL1)); \ - UCSR1A = 0; \ - UBRR1H = 0; \ - UBRR1L = 0; \ -} while (0) -#define PS2_USART_RX_INT_ON() do { \ - UCSR1B = ((1 << RXCIE1) | \ - (1 << RXEN1)); \ -} while (0) -#define PS2_USART_RX_POLL_ON() do { \ - UCSR1B = (1 << RXEN1); \ -} while (0) -#define PS2_USART_OFF() do { \ - UCSR1C = 0; \ - UCSR1B &= ~((1 << RXEN1) | \ - (1 << TXEN1)); \ -} while (0) -#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) -#define PS2_USART_RX_DATA UDR1 -#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) -#define PS2_USART_RX_VECT USART1_RX_vect - -#endif diff --git a/ps2_usb/config_vusb.h b/ps2_usb/config_vusb.h deleted file mode 100644 index afd2f7911..000000000 --- a/ps2_usb/config_vusb.h +++ /dev/null @@ -1,133 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2233 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER t.m.k. -#define PRODUCT PS/2 keyboard converter -#define DESCRIPTION convert PS/2 keyboard to USB - - -/* matrix size */ -#define MATRIX_ROWS 32 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ - keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ -) - - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - - -/* PS/2 lines */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 4 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 - - -// Synchronous USART is used to receive data from keyboard. -// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. -// NOTE: This is recomended strongly if you use V-USB library. -#define PS2_USE_USART - -// External or Pin Change Interrupt is used to receive data from keyboard. -// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. -//#define PS2_USE_INT - - -#ifdef PS2_USE_USART -// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge -// set DDR of CLOCK as input to be slave -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ - PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ - UCSR0C = ((1 << UMSEL00) | \ - (3 << UPM00) | \ - (0 << USBS0) | \ - (3 << UCSZ00) | \ - (0 << UCPOL0)); \ - UCSR0A = 0; \ - UBRR0H = 0; \ - UBRR0L = 0; \ -} while (0) -#define PS2_USART_RX_INT_ON() do { \ - UCSR0B = ((1 << RXCIE0) | \ - (1 << RXEN0)); \ -} while (0) -#define PS2_USART_RX_POLL_ON() do { \ - UCSR0B = (1 << RXEN0); \ -} while (0) -#define PS2_USART_OFF() do { \ - UCSR0C = 0; \ - UCSR0B &= ~((1 << RXEN0) | \ - (1 << TXEN0)); \ -} while (0) -#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0)) -#define PS2_USART_RX_DATA UDR0 -#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0))) -#define PS2_USART_RX_VECT USART_RX_vect -#endif - - -#ifdef PS2_USE_INT -/* INT1 -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -*/ - -/* PCINT20 */ -#define PS2_INT_INIT() do { \ - PCICR |= (1<<PCIE2); \ -} while (0) -#define PS2_INT_ON() do { \ - PCMSK2 |= (1<<PCINT20); \ -} while (0) -#define PS2_INT_OFF() do { \ - PCMSK2 &= ~(1<<PCINT20); \ - PCICR &= ~(1<<PCIE2); \ -} while (0) -#define PS2_INT_VECT PCINT2_vect -#endif - -#endif diff --git a/ps2_usb/keymap.c b/ps2_usb/keymap.c deleted file mode 100644 index f1e34a929..000000000 --- a/ps2_usb/keymap.c +++ /dev/null @@ -1,379 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * Keymap for PS/2 keyboard - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "usb_keycodes.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap.h" - - - - -// Following macros help you to define a keymap with the form of actual keyboard layout. - -/* US layout plus all other various keys */ -#define KEYMAP_ALL( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ - \ - K61, /* for European ISO */ \ - K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ - K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ - KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ - KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ - KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ - KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ - K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ - KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ -) { \ - { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ - { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \ - { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \ - { KB_##K18, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \ - { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \ - { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \ - { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \ - { KB_##K38, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \ - { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \ - { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ - { KB_##K50, KB_##K51, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_##K57 }, \ - { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_##K5F }, \ - { KB_NO, KB_##K61, KB_NO, KB_NO, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \ - { KB_NO, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \ - { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ - { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_##K90, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_##K95, KB_NO, KB_NO }, \ - { KB_##K98, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \ - { KB_##KA0, KB_##KA1, KB_NO, KB_##KA3, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \ - { KB_##KA8, KB_NO, KB_NO, KB_##KAB, KB_NO, KB_NO, KB_NO, KB_##KAF }, \ - { KB_##KB0, KB_NO, KB_##KB2, KB_NO, KB_##KB4, KB_NO, KB_NO, KB_##KB7 }, \ - { KB_##KB8, KB_NO, KB_##KBA, KB_##KBB, KB_NO, KB_NO, KB_NO, KB_##KBF }, \ - { KB_##KC0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_##KC8, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_##KCD, KB_NO, KB_NO }, \ - { KB_##KD0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \ - { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \ -} - -/* US layout */ -#define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layout */ -#define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layout */ -#define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ssign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 5, // Fn0 - 6, // Fn1 - 0, // Fn2 - 0, // Fn3 - 0, // Fn4 - 0, // Fn5 - 0, // Fn6 - 0 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KB_SCLN, // Fn0 - KB_SLSH, // Fn1 - KB_NO, // Fn2 - KB_NO, // Fn3 - KB_NO, // Fn4 - KB_NO, // Fn5 - KB_NO, // Fn6 - KB_NO // Fn7 -}; - - -// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode. -// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro. -// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS. -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: default - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| - * `---' `---------------' `---------------' `---------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | - * |-----------------------------------------------------------| `-----------' |-----------| +| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - * ; = Fn0(to Layer 5) - * / = Fn1(to Layer 6) - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 1: plain Qwerty without layer switching - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 2: Colemak http://colemak.com - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| - * |-----------------------------------------------------------| - * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| - * |-----------------------------------------------------------| - * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| - * |-----------------------------------------------------------| - * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | - * |-----------------------------------------------------------| - * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS, - LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 5: Mouse keys - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| - * |-----------------------------------------------------------| - * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| - * |-----------------------------------------------------------| - * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | - * |-----------------------------------------------------------| - * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button - * Vo = Volume, Mut = Mute - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* 6: Cursor keys - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| - * |-----------------------------------------------------------| - * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| - * |-----------------------------------------------------------| - * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); -} - -uint8_t keymap_fn_layer(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_layer[biton(fn_bits)]); -} - -uint8_t keymap_fn_keycode(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); -} diff --git a/ps2_usb/led.c b/ps2_usb/led.c deleted file mode 100644 index e448e84ec..000000000 --- a/ps2_usb/led.c +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "stdint.h" -#include "ps2.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - uint8_t ps2_led = 0; - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) - ps2_led |= (1<<PS2_LED_SCROLL_LOCK); - if (usb_led & (1<<USB_LED_NUM_LOCK)) - ps2_led |= (1<<PS2_LED_NUM_LOCK); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) - ps2_led |= (1<<PS2_LED_CAPS_LOCK); - ps2_host_set_led(ps2_led); -} diff --git a/ps2_usb/matrix.c b/ps2_usb/matrix.c deleted file mode 100644 index 4187ea060..000000000 --- a/ps2_usb/matrix.c +++ /dev/null @@ -1,452 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "util.h" -#include "debug.h" -#include "ps2.h" -#include "matrix.h" - - -static void matrix_make(uint8_t code); -static void matrix_break(uint8_t code); -#ifdef MATRIX_HAS_GHOST -static bool matrix_has_ghost_in_row(uint8_t row); -#endif - - -/* - * Matrix Array usage: - * 'Scan Code Set 2' is assigned into 256(32x8)cell matrix. - * Hmm, it is very sparse and not efficient :( - * - * Notes: - * Both 'Hanguel/English'(F1) and 'Hanja'(F2) collide with 'Delete'(E0 71) and 'Down'(E0 72). - * These two Korean keys need exceptional handling and are not supported for now. Sorry. - * - * 8bit wide - * +---------+ - * 0| | - * :| XX | 00-7F for normal codes(without E0-prefix) - * f|_________| - * 10| | - * :| E0 YY | 80-FF for E0-prefixed codes - * 1f| | (<YY>|0x80) is used as matrix position. - * +---------+ - * - * Exceptions: - * 0x83: F7(0x83) This is a normal code but beyond 0x7F. - * 0xFC: PrintScreen - * 0xFE: Pause - */ -static uint8_t matrix[MATRIX_ROWS]; -#define ROW(code) (code>>3) -#define COL(code) (code&0x07) - -// matrix positions for exceptional keys -#define F7 (0x83) -#define PRINT_SCREEN (0xFC) -#define PAUSE (0xFE) - -static bool is_modified = false; - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - ps2_host_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - return; -} - -/* - * PS/2 Scan Code Set 2: Exceptional Handling - * - * There are several keys to be handled exceptionally. - * The scan code for these keys are varied or prefix/postfix'd - * depending on modifier key state. - * - * Keyboard Scan Code Specification: - * http://www.microsoft.com/whdc/archive/scancode.mspx - * http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc - * - * - * 1) Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left - * a) when Num Lock is off - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Ohter | <make> | <break> - * LShift | E0 F0 12 <make> | <break> E0 12 - * RShift | E0 F0 59 <make> | <break> E0 59 - * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12 - * - * b) when Num Lock is on - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Other | E0 12 <make> | <break> E0 F0 12 - * Shift'd | <make> | <break> - * - * Handling: These prefix/postfix codes are ignored. - * - * - * 2) Keypad / - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Ohter | <make> | <break> - * LShift | E0 F0 12 <make> | <break> E0 12 - * RShift | E0 F0 59 <make> | <break> E0 59 - * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12 - * - * Handling: These prefix/postfix codes are ignored. - * - * - * 3) PrintScreen - * modifiers | make | break - * ----------+--------------+----------------------------------- - * Other | E0 12 E0 7C | E0 F0 7C E0 F0 12 - * Shift'd | E0 7C | E0 F0 7C - * Control'd | E0 7C | E0 F0 7C - * Alt'd | 84 | F0 84 - * - * Handling: These prefix/postfix codes are ignored, and both scan codes - * 'E0 7C' and 84 are seen as PrintScreen. - * - * 4) Pause - * modifiers | make(no break code) - * ----------+-------------------------------------------------- - * Other | E1 14 77 E1 F0 14 F0 77 - * Control'd | E0 7E E0 F0 7E - * - * Handling: Both code sequences are treated as a whole. - * And we need a ad hoc 'pseudo break code' hack to get the key off - * because it has no break code. - * - */ -uint8_t matrix_scan(void) -{ - - // scan code reading states - static enum { - INIT, - F0, - E0, - E0_F0, - // Pause - E1, - E1_14, - E1_14_77, - E1_14_77_E1, - E1_14_77_E1_F0, - E1_14_77_E1_F0_14, - E1_14_77_E1_F0_14_F0, - // Control'd Pause - E0_7E, - E0_7E_E0, - E0_7E_E0_F0, - } state = INIT; - - - is_modified = false; - - // 'pseudo break code' hack - if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) { - matrix_break(PAUSE); - } - - uint8_t code; - while ((code = ps2_host_recv())) { - switch (state) { - case INIT: - switch (code) { - case 0xE0: - state = E0; - break; - case 0xF0: - state = F0; - break; - case 0xE1: - state = E1; - break; - case 0x83: // F7 - matrix_make(F7); - state = INIT; - break; - case 0x84: // Alt'd PrintScreen - matrix_make(PRINT_SCREEN); - state = INIT; - break; - default: // normal key make - if (code < 0x80) { - matrix_make(code); - } else { - debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case E0: // E0-Prefixed - switch (code) { - case 0x12: // to be ignored - case 0x59: // to be ignored - state = INIT; - break; - case 0x7E: // Control'd Pause - state = E0_7E; - break; - case 0xF0: - state = E0_F0; - break; - default: - if (code < 0x80) { - matrix_make(code|0x80); - } else { - debug("unexpected scan code at E0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case F0: // Break code - switch (code) { - case 0x83: // F7 - matrix_break(F7); - state = INIT; - break; - case 0x84: // Alt'd PrintScreen - matrix_break(PRINT_SCREEN); - state = INIT; - break; - default: - if (code < 0x80) { - matrix_break(code); - } else { - debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case E0_F0: // Break code of E0-prefixed - switch (code) { - case 0x12: // to be ignored - case 0x59: // to be ignored - state = INIT; - break; - default: - if (code < 0x80) { - matrix_break(code|0x80); - } else { - debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - // following are states of Pause - case E1: - switch (code) { - case 0x14: - state = E1_14; - break; - default: - state = INIT; - } - break; - case E1_14: - switch (code) { - case 0x77: - state = E1_14_77; - break; - default: - state = INIT; - } - break; - case E1_14_77: - switch (code) { - case 0xE1: - state = E1_14_77_E1; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1: - switch (code) { - case 0xF0: - state = E1_14_77_E1_F0; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0: - switch (code) { - case 0x14: - state = E1_14_77_E1_F0_14; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0_14: - switch (code) { - case 0xF0: - state = E1_14_77_E1_F0_14_F0; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0_14_F0: - switch (code) { - case 0x77: - matrix_make(PAUSE); - state = INIT; - break; - default: - state = INIT; - } - break; - // Following are states of Control'd Pause - case E0_7E: - if (code == 0xE0) - state = E0_7E_E0; - else - state = INIT; - break; - case E0_7E_E0: - if (code == 0xF0) - state = E0_7E_E0_F0; - else - state = INIT; - break; - case E0_7E_E0_F0: - if (code == 0x7E) - matrix_make(PAUSE); - state = INIT; - break; - default: - state = INIT; - } - phex(code); - } - return 1; -} - -bool matrix_is_modified(void) -{ - return is_modified; -} - -inline -bool matrix_has_ghost(void) -{ -#ifdef MATRIX_HAS_GHOST - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix_has_ghost_in_row(i)) - return true; - } -#endif - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & (1<<col)); -} - -inline -uint8_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 01234567\n"); - for (uint8_t row = 0; row < matrix_rows(); row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); -#ifdef MATRIX_HAS_GHOST - if (matrix_has_ghost_in_row(row)) { - print(" <ghost"); - } -#endif - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop(matrix[i]); - } - return count; -} - -#ifdef MATRIX_HAS_GHOST -inline -static bool matrix_has_ghost_in_row(uint8_t row) -{ - // no ghost exists in case less than 2 keys on - if (((matrix[row] - 1) & matrix[row]) == 0) - return false; - - // ghost exists in case same state as other row - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - if (i != row && (matrix[i] & matrix[row]) == matrix[row]) - return true; - } - return false; -} -#endif - - -inline -static void matrix_make(uint8_t code) -{ - if (!matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] |= 1<<COL(code); - is_modified = true; - } -} - -inline -static void matrix_break(uint8_t code) -{ - if (matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] &= ~(1<<COL(code)); - is_modified = true; - } -} diff --git a/ps2_usb/usbconfig.h b/ps2_usb/usbconfig.h deleted file mode 100644 index 9038f1eb8..000000000 --- a/ps2_usb/usbconfig.h +++ /dev/null @@ -1,378 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config_vusb.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.' -#define USB_CFG_VENDOR_NAME_LEN 6 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r' -#define USB_CFG_DEVICE_NAME_LEN 23 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -#endif /* __usbconfig_h_included__ */ |