diff options
Diffstat (limited to 'quantum/config_common.h')
-rw-r--r-- | quantum/config_common.h | 153 |
1 files changed, 56 insertions, 97 deletions
diff --git a/quantum/config_common.h b/quantum/config_common.h index 8ed5f4a10..28f68b9c7 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -2,58 +2,61 @@ #define CONFIG_DEFINITIONS_H /* diode directions */ -#define COL2ROW 0 -#define ROW2COL 1 -/* I/O pins */ -#define B0 0x30 -#define B1 0x31 -#define B2 0x32 -#define B3 0x33 -#define B4 0x34 -#define B5 0x35 -#define B6 0x36 -#define B7 0x37 -#define C0 0x60 -#define C1 0x61 -#define C2 0x62 -#define C3 0x63 -#define C4 0x64 -#define C5 0x65 -#define C6 0x66 -#define C7 0x67 -#define D0 0x90 -#define D1 0x91 -#define D2 0x92 -#define D3 0x93 -#define D4 0x94 -#define D5 0x95 -#define D6 0x96 -#define D7 0x97 -#define E0 0xC0 -#define E1 0xC1 -#define E2 0xC2 -#define E3 0xC3 -#define E4 0xC4 -#define E5 0xC5 -#define E6 0xC6 -#define E7 0xC7 -#define F0 0xF0 -#define F1 0xF1 -#define F2 0xF2 -#define F3 0xF3 -#define F4 0xF4 -#define F5 0xF5 -#define F6 0xF6 -#define F7 0xF7 -#define A0 0x00 -#define A1 0x01 -#define A2 0x02 -#define A3 0x03 -#define A4 0x04 -#define A5 0x05 -#define A6 0x06 -#define A7 0x07 +#define COL2ROW 0 +#define ROW2COL 1 +#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */ +/* I/O pins */ +#ifndef F0 + #define B0 0x30 + #define B1 0x31 + #define B2 0x32 + #define B3 0x33 + #define B4 0x34 + #define B5 0x35 + #define B6 0x36 + #define B7 0x37 + #define C0 0x60 + #define C1 0x61 + #define C2 0x62 + #define C3 0x63 + #define C4 0x64 + #define C5 0x65 + #define C6 0x66 + #define C7 0x67 + #define D0 0x90 + #define D1 0x91 + #define D2 0x92 + #define D3 0x93 + #define D4 0x94 + #define D5 0x95 + #define D6 0x96 + #define D7 0x97 + #define E0 0xC0 + #define E1 0xC1 + #define E2 0xC2 + #define E3 0xC3 + #define E4 0xC4 + #define E5 0xC5 + #define E6 0xC6 + #define E7 0xC7 + #define F0 0xF0 + #define F1 0xF1 + #define F2 0xF2 + #define F3 0xF3 + #define F4 0xF4 + #define F5 0xF5 + #define F6 0xF6 + #define F7 0xF7 + #define A0 0x00 + #define A1 0x01 + #define A2 0x02 + #define A3 0x03 + #define A4 0x04 + #define A5 0x05 + #define A6 0x06 + #define A7 0x07 +#endif /* USART configuration */ #ifdef BLUETOOTH_ENABLE @@ -76,53 +79,9 @@ } while(0) # else # error "USART configuration is needed." +# endif #endif -// I'm fairly sure these aren't needed, but oh well - Jack - -/* - * PS/2 Interrupt configuration - */ -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - -/* - * PS/2 Busywait configuration - */ -#ifdef PS2_USE_BUSYWAIT -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 -#endif - -#endif +#define API_SYSEX_MAX_SIZE 32 #endif |