diff options
Diffstat (limited to 'quantum')
| -rw-r--r-- | quantum/keymap_common.c | 2 | ||||
| -rw-r--r-- | quantum/keymap_extras/keymap_colemak.h | 62 | ||||
| -rw-r--r-- | quantum/keymap_extras/keymap_nordic.h | 6 | ||||
| -rw-r--r-- | quantum/template/README.md | 160 |
4 files changed, 37 insertions, 193 deletions
diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c index 057c0c60e..ae109da16 100644 --- a/quantum/keymap_common.c +++ b/quantum/keymap_common.c @@ -64,7 +64,7 @@ action_t action_for_key(uint8_t layer, keypos_t key) action.code = ACTION_MACRO(keycode & 0xFF); return action; #ifdef BACKLIGHT_ENABLE - } else if (keycode >= BL_0 & keycode <= BL_15) { + } else if (keycode >= BL_0 && keycode <= BL_15) { action_t action; action.code = ACTION_BACKLIGHT_LEVEL(keycode & 0x000F); return action; diff --git a/quantum/keymap_extras/keymap_colemak.h b/quantum/keymap_extras/keymap_colemak.h index 87df01ab5..8a418c615 100644 --- a/quantum/keymap_extras/keymap_colemak.h +++ b/quantum/keymap_extras/keymap_colemak.h @@ -24,7 +24,7 @@ #define CM_E KC_K #define CM_I KC_L #define CM_O KC_SCLN -#define CM_SCLN LSFT(CM_SCLN) +#define CM_COLN LSFT(CM_SCLN) #define CM_Z KC_Z #define CM_X KC_X @@ -39,37 +39,37 @@ // Make it easy to support these in macros // TODO: change macro implementation so these aren't needed -#define KC_CM_Q CM_Q -#define KC_CM_W CM_W -#define KC_CM_F CM_F -#define KC_CM_P CM_P -#define KC_CM_G CM_G -#define KC_CM_J CM_J -#define KC_CM_L CM_L -#define KC_CM_U CM_U -#define KC_CM_Y CM_Y -#define KC_CM_SCLN CM_SCLN +#define KC_CM_Q CM_Q +#define KC_CM_W CM_W +#define KC_CM_F CM_F +#define KC_CM_P CM_P +#define KC_CM_G CM_G +#define KC_CM_J CM_J +#define KC_CM_L CM_L +#define KC_CM_U CM_U +#define KC_CM_Y CM_Y +#define KC_CM_SCLN CM_SCLN -#define KC_CM_A CM_A -#define KC_CM_R CM_R -#define KC_CM_S CM_S -#define KC_CM_T CM_T -#define KC_CM_D CM_D -#define KC_CM_H CM_H -#define KC_CM_N CM_N -#define KC_CM_E CM_E -#define KC_CM_I CM_I -#define KC_CM_O CM_O +#define KC_CM_A CM_A +#define KC_CM_R CM_R +#define KC_CM_S CM_S +#define KC_CM_T CM_T +#define KC_CM_D CM_D +#define KC_CM_H CM_H +#define KC_CM_N CM_N +#define KC_CM_E CM_E +#define KC_CM_I CM_I +#define KC_CM_O CM_O -#define KC_CM_Z CM_Z -#define KC_CM_X CM_X -#define KC_CM_C CM_C -#define KC_CM_V CM_V -#define KC_CM_B CM_B -#define KC_CM_K CM_K -#define KC_CM_M CM_M -#define KC_CM_COMM CM_COMM -#define KC_CM_DOT CM_DOT -#define KC_CM_SLSH CM_SLSH +#define KC_CM_Z CM_Z +#define KC_CM_X CM_X +#define KC_CM_C CM_C +#define KC_CM_V CM_V +#define KC_CM_B CM_B +#define KC_CM_K CM_K +#define KC_CM_M CM_M +#define KC_CM_COMM CM_COMM +#define KC_CM_DOT CM_DOT +#define KC_CM_SLSH CM_SLSH #endif diff --git a/quantum/keymap_extras/keymap_nordic.h b/quantum/keymap_extras/keymap_nordic.h index 02a704216..7ef41fb79 100644 --- a/quantum/keymap_extras/keymap_nordic.h +++ b/quantum/keymap_extras/keymap_nordic.h @@ -48,12 +48,12 @@ #define NO_LBRC ALGR(KC_8) #define NO_RBRC ALGR(KC_9) #define NO_RCBR ALGR(KC_0) -#define NO_PIPE ALGR(NO_ACUT) +#define NO_PIPE ALGR(KC_NUBS) #define NO_EURO ALGR(KC_E) #define NO_TILD ALGR(NO_QUOT) -#define NO_BSLS ALGR(NO_LESS) +#define NO_BSLS ALGR(KC_MINS) #define NO_MU ALGR(KC_M) -#endif
\ No newline at end of file +#endif diff --git a/quantum/template/README.md b/quantum/template/README.md index f34862cd9..dc163a2f4 100644 --- a/quantum/template/README.md +++ b/quantum/template/README.md @@ -3,167 +3,11 @@ ## Quantum MK Firmware -You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. - - BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - MIDI_ENABLE = yes # MIDI controls - # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // - BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - -## Quick aliases to common actions - -Your keymap can include shortcuts to common operations (called "function actions" in tmk). - -### Switching and toggling layers - -`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. - -`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). - -`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. - -### Fun with modifier keys - -* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias -* `RSFT(kc)` - applies right Shift to *kc* -* `LCTL(kc)` - applies left Control to *kc* -* `RCTL(kc)` - applies right Control to *kc* -* `LALT(kc)` - applies left Alt to *kc* -* `RALT(kc)` - applies right Alt to *kc* -* `LGUI(kc)` - applies left GUI (command/win) to *kc* -* `RGUI(kc)` - applies right GUI (command/win) to *kc* - -You can also chain these, like this: - - LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. - -The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. - - KC_TILD ~ - KC_EXLM ! - KC_AT @ - KC_HASH # - KC_DLR $ - KC_PERC % - KC_CIRC ^ - KC_AMPR & - KC_ASTR * - KC_LPRN ( - KC_RPRN ) - KC_UNDS _ - KC_PLUS + - KC_LCBR { - KC_RCBR } - KC_PIPE | - KC_COLN : - -`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. - -These are the values you can use for the `mod` in `MT()` (right-hand modifiers are not available): - - * MOD_LCTL - * MOD_LSFT - * MOD_LALT - * MOD_LGUI - -These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. - -We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: - - * `CTL_T(kc)` - is LCTL when held and *kc* when tapped - * `SFT_T(kc)` - is LSFT when held and *kc* when tapped - * `ALT_T(kc)` - is LALT when held and *kc* when tapped - * `GUI_T(kc)` - is LGUI when held and *kc* when tapped - * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) - -### Temporarily setting the default layer - -`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. - -### Remember: These are just aliases - -These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk ACTION_* functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keymap.md#2-action). - -Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. - -## Macro shortcuts: Send a whole string when pressing just one key - -Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymaps/default.c). - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. -{ - switch(id) { - case 0: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes - } - break; - } - return MACRO_NONE; -}; -``` -A macro can include the following commands: - -* I() change interval of stroke in milliseconds. -* D() press key. -* U() release key. -* T() type key(press and release). -* W() wait (milliseconds). -* END end mark. - -So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. - -Note: Using macros to have your keyboard send passwords for you is a bad idea. - -### Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) - -Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: - - #include "keymap_<layout>.h" - -Where <layout> is "colemak" or "dvorak". After including this line, you will get access to: - - * `CM_*` for all of the Colemak-equivalent characters - * `DV_*` for all of the Dvorak-equivalent characters - -These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. - -To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. - -## Additional language support - -In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `รน` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). - -## Unicode support - -You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. - -## Other firmware shortcut keycodes - -* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) -* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things -* `BL_ON` - turns the backlight on -* `BL_OFF` - turns the backlight off -* `BL_<n>` - sets the backlight to level *n* -* `BL_INC` - increments the backlight level by one -* `BL_DEC` - decrements the backlight level by one -* `BL_TOGG` - toggles the backlight -* `BL_STEP` - steps through the backlight levels - -Enable the backlight from the Makefile. - -## MIDI functionalty - -This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile. - -## Bluetooth functionality - -This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will. +For the full Quantum feature list, see [the parent README.md](/README.md). ## Building -Download or clone the whole firmware and navigate to the keyboard/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button. +Download or clone the whole firmware and navigate to the keyboard/%KEYBOARD% folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. |