diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/d51_util.h')
| -rw-r--r-- | tmk_core/protocol/arm_atsam/d51_util.h | 80 |
1 files changed, 54 insertions, 26 deletions
diff --git a/tmk_core/protocol/arm_atsam/d51_util.h b/tmk_core/protocol/arm_atsam/d51_util.h index 7a35f7989..71431942c 100644 --- a/tmk_core/protocol/arm_atsam/d51_util.h +++ b/tmk_core/protocol/arm_atsam/d51_util.h @@ -20,37 +20,65 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "samd51j18a.h" -//TODO: PS: Should bring these ports out to keyboard level configuration - -//Debug LED PA27 -#define led_ena REG_PORT_DIRSET0 = 0x08000000 //PA27 Output -#define led_on REG_PORT_OUTSET0 = 0x08000000 //PA27 High -#define led_off REG_PORT_OUTCLR0 = 0x08000000 //PA27 Low - -//Debug Port PB30 -#define m15_ena REG_PORT_DIRSET1 = 0x40000000 //PB30 Output -#define m15_on REG_PORT_OUTSET1 = 0x40000000 //PB30 High -#define m15_off REG_PORT_OUTCLR1 = 0x40000000 //PB30 Low - -//Debug Port PB23 -#define m27_ena REG_PORT_DIRSET1 = 0x800000 //PB23 Output -#define m27_on REG_PORT_OUTSET1 = 0x800000 //PB23 High -#define m27_off REG_PORT_OUTCLR1 = 0x800000 //PB23 Low - -//Debug Port PB31 -#define m28_ena REG_PORT_DIRSET1 = 0x80000000 //PB31 Output -#define m28_on REG_PORT_OUTSET1 = 0x80000000 //PB31 High -#define m28_off REG_PORT_OUTCLR1 = 0x80000000 //PB31 Low - -#define m15_loop(M15X) {uint8_t M15L=M15X; while(M15L--){m15_on;CLK_delay_us(1);m15_off;}} +/* Debug LED */ +#if DEBUG_LED_ENABLE == 1 +#define DBG_LED_ENA PORT->Group[DEBUG_LED_PORT].DIRSET.reg = (1 << DEBUG_LED_PIN) +#define DBG_LED_DIS PORT->Group[DEBUG_LED_PORT].DIRCLR.reg = (1 << DEBUG_LED_PIN) +#define DBG_LED_ON PORT->Group[DEBUG_LED_PORT].OUTSET.reg = (1 << DEBUG_LED_PIN) +#define DBG_LED_OFF PORT->Group[DEBUG_LED_PORT].OUTCLR.reg = (1 << DEBUG_LED_PIN) +#else +#define DBG_LED_ENA +#define DBG_LED_DIS +#define DBG_LED_ON +#define DBG_LED_OFF +#endif + +/* Debug Port 1 */ +#if DEBUG_PORT1_ENABLE == 1 +#define DBG_1_ENA PORT->Group[DEBUG_PORT1_PORT].DIRSET.reg = (1 << DEBUG_PORT1_PIN) +#define DBG_1_DIS PORT->Group[DEBUG_PORT1_PORT].DIRCLR.reg = (1 << DEBUG_PORT1_PIN) +#define DBG_1_ON PORT->Group[DEBUG_PORT1_PORT].OUTSET.reg = (1 << DEBUG_PORT1_PIN) +#define DBG_1_OFF PORT->Group[DEBUG_PORT1_PORT].OUTCLR.reg = (1 << DEBUG_PORT1_PIN) +#else +#define DBG_1_ENA +#define DBG_1_DIS +#define DBG_1_ON +#define DBG_1_OFF +#endif + +/* Debug Port 2 */ +#if DEBUG_PORT2_ENABLE == 1 +#define DBG_2_ENA PORT->Group[DEBUG_PORT2_PORT].DIRSET.reg = (1 << DEBUG_PORT2_PIN) +#define DBG_2_DIS PORT->Group[DEBUG_PORT2_PORT].DIRCLR.reg = (1 << DEBUG_PORT2_PIN) +#define DBG_2_ON PORT->Group[DEBUG_PORT2_PORT].OUTSET.reg = (1 << DEBUG_PORT2_PIN) +#define DBG_2_OFF PORT->Group[DEBUG_PORT2_PORT].OUTCLR.reg = (1 << DEBUG_PORT2_PIN) +#else +#define DBG_2_ENA +#define DBG_2_DIS +#define DBG_2_ON +#define DBG_2_OFF +#endif + +/* Debug Port 3 */ +#if DEBUG_PORT3_ENABLE == 1 +#define DBG_3_ENA PORT->Group[DEBUG_PORT3_PORT].DIRSET.reg = (1 << DEBUG_PORT3_PIN) +#define DBG_3_DIS PORT->Group[DEBUG_PORT3_PORT].DIRCLR.reg = (1 << DEBUG_PORT3_PIN) +#define DBG_3_ON PORT->Group[DEBUG_PORT3_PORT].OUTSET.reg = (1 << DEBUG_PORT3_PIN) +#define DBG_3_OFF PORT->Group[DEBUG_PORT3_PORT].OUTCLR.reg = (1 << DEBUG_PORT3_PIN) +#else +#define DBG_3_ENA +#define DBG_3_DIS +#define DBG_3_ON +#define DBG_3_OFF +#endif -void m15_print(uint32_t x); +void dbg_print(uint32_t x); void dled_print(uint32_t x, uint8_t long_pause); void debug_code_init(void); void debug_code_disable(void); -#ifdef DEBUG_BOOT_TRACING +#ifdef DEBUG_BOOT_TRACING_ENABLE #define DBGC(n) debug_code = n @@ -190,6 +218,6 @@ enum debug_code_list { #define DBGC(n) {} -#endif //DEBUG_BOOT_TRACING +#endif //DEBUG_BOOT_TRACING_ENABLE #endif //_D51_UTIL_H_ |