diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb/usb.h')
| -rw-r--r-- | tmk_core/protocol/arm_atsam/usb/usb.h | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/usb.h b/tmk_core/protocol/arm_atsam/usb/usb.h new file mode 100644 index 000000000..9a452881a --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/usb.h @@ -0,0 +1,492 @@ +/** + * \file + * + * \brief SAM USB Driver + * + * Copyright (C) 2014-2016 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> + */ +#ifndef USB_H_INCLUDED +#define USB_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \defgroup asfdoc_sam0_usb_group SAM Universal Serial Bus (USB) + * + * The Universal Serial Bus (USB) module complies with the USB 2.1 specification. + * + * The following peripherals are used by this module: + * - USB (Universal Serial Bus) + * + * The following devices can use this module: + * - Atmel | SMART SAM D51 + * + * The USB module covers following mode: + * \if USB_DEVICE_MODE + * - USB Device Mode + * \endif + * \if USB_HOST_MODE + * - USB Host Mode + * \endif + * + * The USB module covers following speed: + * \if USB_HS_MODE + * - USB High Speed (480Mbit/s) + * \endif + * - USB Full Speed (12Mbit/s) + * \if USB_LS_MODE + * - USB Low Speed (1.5Mbit/s) + * \endif + * + * \if USB_LPM_MODE + * The USB module supports Link Power Management (LPM-L1) protocol. + * \endif + * + * USB support needs whole set of enumeration process, to make the device + * recognizable and usable. The USB driver is designed to interface to the + * USB Stack in Atmel Software Framework (ASF). + * + * \if USB_DEVICE_MODE + * \section asfdoc_sam0_usb_device USB Device Mode + * The ASF USB Device Stack has defined the USB Device Driver (UDD) interface, + * to support USB device operations. The USB module device driver complies with + * this interface, so that the USB Device Stack can work based on the + * USB module. + * + * Refer to <a href="http://www.atmel.com/images/doc8360.pdf"> + * "ASF - USB Device Stack"</a> for more details. + * \endif + * + * \if USB_HOST_MODE + * \section adfdoc_sam0_usb_host USB Host Mode + * The ASF USB Host Stack has defined the USB Host Driver (UHD) interface, + * to support USB host operations. The USB module host driver complies with + * this interface, so that the USB Host Stack can work based on the USB module. + * + * Refer to <a href="http://www.atmel.com/images/doc8486.pdf"> + * "ASF - USB Host Stack"</a> for more details. + * \endif + */ + +/** Enum for the speed status for the USB module */ +enum usb_speed { + USB_SPEED_LOW, + USB_SPEED_FULL, +}; + +/** Enum for the possible callback types for the USB in host module */ +enum usb_host_callback { + USB_HOST_CALLBACK_SOF, + USB_HOST_CALLBACK_RESET, + USB_HOST_CALLBACK_WAKEUP, + USB_HOST_CALLBACK_DNRSM, + USB_HOST_CALLBACK_UPRSM, + USB_HOST_CALLBACK_RAMACER, + USB_HOST_CALLBACK_CONNECT, + USB_HOST_CALLBACK_DISCONNECT, + USB_HOST_CALLBACK_N, +}; + +/** Enum for the possible callback types for the USB pipe in host module */ +enum usb_host_pipe_callback { + USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE, + USB_HOST_PIPE_CALLBACK_ERROR, + USB_HOST_PIPE_CALLBACK_SETUP, + USB_HOST_PIPE_CALLBACK_STALL, + USB_HOST_PIPE_CALLBACK_N, +}; + +/** + * \brief Host pipe types. + */ +enum usb_host_pipe_type { + USB_HOST_PIPE_TYPE_DISABLE, + USB_HOST_PIPE_TYPE_CONTROL, + USB_HOST_PIPE_TYPE_ISO, + USB_HOST_PIPE_TYPE_BULK, + USB_HOST_PIPE_TYPE_INTERRUPT, + USB_HOST_PIPE_TYPE_EXTENDED, +}; + +/** + * \brief Host pipe token types. + */ +enum usb_host_pipe_token { + USB_HOST_PIPE_TOKEN_SETUP, + USB_HOST_PIPE_TOKEN_IN, + USB_HOST_PIPE_TOKEN_OUT, +}; + +/** + * \brief Enumeration for the possible callback types for the USB in device module + */ +enum usb_device_callback { + USB_DEVICE_CALLBACK_SOF, + USB_DEVICE_CALLBACK_RESET, + USB_DEVICE_CALLBACK_WAKEUP, + USB_DEVICE_CALLBACK_RAMACER, + USB_DEVICE_CALLBACK_SUSPEND, + USB_DEVICE_CALLBACK_LPMNYET, + USB_DEVICE_CALLBACK_LPMSUSP, + USB_DEVICE_CALLBACK_N, +}; + +/** + * \brief Enumeration for the possible callback types for the USB endpoint in device module + */ +enum usb_device_endpoint_callback { + USB_DEVICE_ENDPOINT_CALLBACK_TRCPT, + USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL, + USB_DEVICE_ENDPOINT_CALLBACK_RXSTP, + USB_DEVICE_ENDPOINT_CALLBACK_STALL, + USB_DEVICE_EP_CALLBACK_N, +}; + +/** + * \brief Device Endpoint types. + */ +enum usb_device_endpoint_type { + USB_DEVICE_ENDPOINT_TYPE_DISABLE, + USB_DEVICE_ENDPOINT_TYPE_CONTROL, + USB_DEVICE_ENDPOINT_TYPE_ISOCHRONOUS, + USB_DEVICE_ENDPOINT_TYPE_BULK, + USB_DEVICE_ENDPOINT_TYPE_INTERRUPT, +}; + +/** + * \brief Endpoint Size + */ +enum usb_endpoint_size { + USB_ENDPOINT_8_BYTE, + USB_ENDPOINT_16_BYTE, + USB_ENDPOINT_32_BYTE, + USB_ENDPOINT_64_BYTE, + USB_ENDPOINT_128_BYTE, + USB_ENDPOINT_256_BYTE, + USB_ENDPOINT_512_BYTE, + USB_ENDPOINT_1023_BYTE, +}; + +/** + * \brief Link Power Management Handshake. + */ +enum usb_device_lpm_mode { + USB_DEVICE_LPM_NOT_SUPPORT, + USB_DEVICE_LPM_ACK, + USB_DEVICE_LPM_NYET, +}; + +/** + * \brief Module structure + */ +struct usb_module; + +/** + * \name Host Callback Functions Types + * @{ + */ +typedef void (*usb_host_callback_t)(struct usb_module *module_inst); +typedef void (*usb_host_pipe_callback_t)(struct usb_module *module_inst, void *); +/** @} */ + +/** + * \name Device Callback Functions Types + * @{ + */ +typedef void (*usb_device_callback_t)(struct usb_module *module_inst, void* pointer); +typedef void (*usb_device_endpoint_callback_t)(struct usb_module *module_inst, void* pointer); +/** @} */ + +/** USB configurations */ +struct usb_config { + /** \c true for host, \c false for device. */ + bool select_host_mode; + /** When \c true the module is enabled during standby. */ + bool run_in_standby; + /** Generic Clock Generator source channel. */ + // enum gclk_generator source_generator; + uint8_t source_generator; + /** Speed mode */ + //enum usb_speed speed_mode; + uint8_t speed_mode; +}; + +/** + * \brief USB software module instance structure. + * + * USB software module instance structure, used to retain software state + * information of an associated hardware module instance. + * + */ +struct usb_module { + /** Hardware module pointer of the associated USB peripheral. */ + Usb *hw; + + /** Array to store device related callback functions */ + usb_device_callback_t device_callback[USB_DEVICE_CALLBACK_N]; + usb_device_endpoint_callback_t device_endpoint_callback[USB_EPT_NUM][USB_DEVICE_EP_CALLBACK_N]; + /** Bit mask for device callbacks registered */ + uint16_t device_registered_callback_mask; + /** Bit mask for device callbacks enabled */ + uint16_t device_enabled_callback_mask; + /** Bit mask for device endpoint callbacks registered */ + uint8_t device_endpoint_registered_callback_mask[USB_EPT_NUM]; + /** Bit mask for device endpoint callbacks enabled */ + uint8_t device_endpoint_enabled_callback_mask[USB_EPT_NUM]; +}; + +/** USB device endpoint configurations */ +struct usb_device_endpoint_config { + /** device address */ + uint8_t ep_address; + /** endpoint size */ + enum usb_endpoint_size ep_size; + /** automatic zero length packet mode, \c true to enable */ + bool auto_zlp; + /** type of endpoint with Bank */ + enum usb_device_endpoint_type ep_type; +}; + +/** USB device endpoint callback status parameter structure */ +struct usb_endpoint_callback_parameter { + uint16_t received_bytes; + uint16_t sent_bytes; + uint16_t out_buffer_size; + uint8_t endpoint_address; +}; + +void usb_enable(struct usb_module *module_inst); +void usb_disable(struct usb_module *module_inst); + +/** + * \brief Get the status of USB module's state machine + * + * \param module_inst Pointer to USB module instance + */ +static inline uint8_t usb_get_state_machine_status(struct usb_module *module_inst) +{ + /* Sanity check arguments */ + Assert(module_inst); + Assert(module_inst->hw); + + return module_inst->hw->DEVICE.FSMSTATUS.reg; +} + +void usb_get_config_defaults(struct usb_config *module_config); +enum status_code usb_init(struct usb_module *module_inst, Usb *const hw, + struct usb_config *module_config); + +/** + * \brief Attach USB device to the bus + * + * \param module_inst Pointer to USB device module instance + */ +static inline void usb_device_attach(struct usb_module *module_inst) +{ + module_inst->hw->DEVICE.CTRLB.reg &= ~USB_DEVICE_CTRLB_DETACH; +} + +/** + * \brief Detach USB device from the bus + * + * \param module_inst Pointer to USB device module instance + */ +static inline void usb_device_detach(struct usb_module *module_inst) +{ + module_inst->hw->DEVICE.CTRLB.reg |= USB_DEVICE_CTRLB_DETACH; +} + +/** + * \brief Get the speed mode of USB device + * + * \param module_inst Pointer to USB device module instance + * \return USB Speed mode (\ref usb_speed). + */ +static inline enum usb_speed usb_device_get_speed(struct usb_module *module_inst) +{ + if (!(module_inst->hw->DEVICE.STATUS.reg & USB_DEVICE_STATUS_SPEED_Msk)) { + return USB_SPEED_FULL; + } else { + return USB_SPEED_LOW; + } +} + +/** + * \brief Get the address of USB device + * + * \param module_inst Pointer to USB device module instance + * \return USB device address value. + */ +static inline uint8_t usb_device_get_address(struct usb_module *module_inst) +{ + return ((uint8_t)(module_inst->hw->DEVICE.DADD.bit.DADD)); +} + +/** + * \brief Set the speed mode of USB device + * + * \param module_inst Pointer to USB device module instance + * \param address USB device address value + */ +static inline void usb_device_set_address(struct usb_module *module_inst, uint8_t address) +{ + module_inst->hw->DEVICE.DADD.reg = USB_DEVICE_DADD_ADDEN | address; +} + +/** + * \brief Get the frame number of USB device + * + * \param module_inst Pointer to USB device module instance + * \return USB device frame number value. + */ +static inline uint16_t usb_device_get_frame_number(struct usb_module *module_inst) +{ + return ((uint16_t)(module_inst->hw->DEVICE.FNUM.bit.FNUM)); +} + +/** + * \brief Get the micro-frame number of USB device + * + * \param module_inst Pointer to USB device module instance + * \return USB device micro-frame number value. + */ +static inline uint16_t usb_device_get_micro_frame_number(struct usb_module *module_inst) +{ + return ((uint16_t)(module_inst->hw->DEVICE.FNUM.reg)); +} + +/** + * \brief USB device send the resume wakeup + * + * \param module_inst Pointer to USB device module instance + */ +static inline void usb_device_send_remote_wake_up(struct usb_module *module_inst) +{ + module_inst->hw->DEVICE.CTRLB.reg |= USB_DEVICE_CTRLB_UPRSM; +} + +/** + * \brief USB device set the LPM mode + * + * \param module_inst Pointer to USB device module instance + * \param lpm_mode LPM mode + */ +static inline void usb_device_set_lpm_mode(struct usb_module *module_inst, + enum usb_device_lpm_mode lpm_mode) +{ + module_inst->hw->DEVICE.CTRLB.bit.LPMHDSK = lpm_mode; +} + +/** + * \name USB Device Callback Management + * @{ + */ +enum status_code usb_device_register_callback(struct usb_module *module_inst, + enum usb_device_callback callback_type, + usb_device_callback_t callback_func); +enum status_code usb_device_unregister_callback(struct usb_module *module_inst, + enum usb_device_callback callback_type); +enum status_code usb_device_enable_callback(struct usb_module *module_inst, + enum usb_device_callback callback_type); +enum status_code usb_device_disable_callback(struct usb_module *module_inst, + enum usb_device_callback callback_type); +/** @} */ + +/** + * \name USB Device Endpoint Configuration + * @{ + */ +void usb_device_endpoint_get_config_defaults(struct usb_device_endpoint_config *ep_config); +enum status_code usb_device_endpoint_set_config(struct usb_module *module_inst, + struct usb_device_endpoint_config *ep_config); +bool usb_device_endpoint_is_configured(struct usb_module *module_inst, uint8_t ep); +/** @} */ + +/** + * \name USB Device Endpoint Callback Management + * @{ + */ +enum status_code usb_device_endpoint_register_callback( + struct usb_module *module_inst, uint8_t ep_num, + enum usb_device_endpoint_callback callback_type, + usb_device_endpoint_callback_t callback_func); +enum status_code usb_device_endpoint_unregister_callback( + struct usb_module *module_inst, uint8_t ep_num, + enum usb_device_endpoint_callback callback_type); +enum status_code usb_device_endpoint_enable_callback( + struct usb_module *module_inst, uint8_t ep, + enum usb_device_endpoint_callback callback_type); +enum status_code usb_device_endpoint_disable_callback( + struct usb_module *module_inst, uint8_t ep, + enum usb_device_endpoint_callback callback_type); +/** @} */ + +/** + * \name USB Device Endpoint Job Management + * @{ + */ +enum status_code usb_device_endpoint_write_buffer_job(struct usb_module *module_inst,uint8_t ep_num, + uint8_t* pbuf, uint32_t buf_size); +enum status_code usb_device_endpoint_read_buffer_job(struct usb_module *module_inst,uint8_t ep_num, + uint8_t* pbuf, uint32_t buf_size); +enum status_code usb_device_endpoint_setup_buffer_job(struct usb_module *module_inst, + uint8_t* pbuf); +void usb_device_endpoint_abort_job(struct usb_module *module_inst, uint8_t ep); +/** @} */ + +/** + * \name USB Device Endpoint Operations + * @{ + */ + +bool usb_device_endpoint_is_halted(struct usb_module *module_inst, uint8_t ep); +void usb_device_endpoint_set_halt(struct usb_module *module_inst, uint8_t ep); +void usb_device_endpoint_clear_halt(struct usb_module *module_inst, uint8_t ep); + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif /* USB_H_INCLUDED */ |