diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-120730/LUFA/Common')
7 files changed, 0 insertions, 1609 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h deleted file mode 100644 index 1e09edf29..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h +++ /dev/null @@ -1,177 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Architecture specific definitions relating to specific processor architectures.
- *
- * \copydetails Group_ArchitectureSpecific
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_ArchitectureSpecific Architecture Specific Definitions
- * \brief Architecture specific definitions relating to specific processor architectures.
- *
- * Architecture specific macros, functions and other definitions, which relate to specific architectures. This
- * definitions may or may not be available in some form on other architectures, and thus should be protected by
- * preprocessor checks in portable code to prevent compile errors.
- *
- * @{
- */
-
-#ifndef __LUFA_ARCHSPEC_H__
-#define __LUFA_ARCHSPEC_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__)
- #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
- /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging
- * interface after is has been disabled in software via \ref JTAG_DISABLE().
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_ENABLE() MACROS{ \
- __asm__ __volatile__ ( \
- "in __tmp_reg__,__SREG__" "\n\t" \
- "cli" "\n\t" \
- "out %1, %0" "\n\t" \
- "out __SREG__, __tmp_reg__" "\n\t" \
- "out %1, %0" "\n\t" \
- : \
- : "r" (MCUCR & ~(1 << JTD)), \
- "M" (_SFR_IO_ADDR(MCUCR)) \
- : "r0"); \
- }MACROE
-
- /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG
- * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO
- * mode.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DISABLE() MACROS{ \
- __asm__ __volatile__ ( \
- "in __tmp_reg__,__SREG__" "\n\t" \
- "cli" "\n\t" \
- "out %1, %0" "\n\t" \
- "out __SREG__, __tmp_reg__" "\n\t" \
- "out %1, %0" "\n\t" \
- : \
- : "r" (MCUCR | (1 << JTD)), \
- "M" (_SFR_IO_ADDR(MCUCR)) \
- : "r0"); \
- }MACROE
- #endif
-
- /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always
- * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
- * removes/reorders code to the point where break points cannot reliably be set.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::)
-
- /** Defines an explicit JTAG break point in the resulting binary via the assembly \c BREAK statement. When
- * a JTAG is used, this causes the program execution to halt when reached until manually resumed.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("break" ::)
-
- /** Macro for testing condition "x" and breaking via \ref JTAG_DEBUG_BREAK() if the condition is false.
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Condition Condition that will be evaluated.
- */
- #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE
-
- /** Macro for testing condition \c "x" and writing debug data to the stdout stream if \c false. The stdout stream
- * must be pre-initialized before this macro is run and linked to an output device, such as the microcontroller's
- * USART peripheral.
- *
- * The output takes the form "{FILENAME}: Function {FUNCTION NAME}, Line {LINE NUMBER}: Assertion {Condition} failed."
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Condition Condition that will be evaluated,
- */
- #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \
- printf_P(PSTR("%s: Function \"%s\", Line %d: " \
- "Assertion \"%s\" failed.\r\n"), \
- __FILE__, __func__, __LINE__, #Condition); } }MACROE
-
- #if !defined(pgm_read_ptr) || defined(__DOXYGEN__)
- /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is currently a wrapper for the
- * avr-libc \c pgm_read_ptr() macro with a \c void* cast, so that its value can be assigned directly
- * to a pointer variable or used in pointer arithmetic without further casting in C. In a future
- * avr-libc distribution this will be part of the standard API and will be implemented in a more formal
- * manner.
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Address Address of the pointer to read.
- *
- * \return Pointer retrieved from PROGMEM space.
- */
- #define pgm_read_ptr(Address) (void*)pgm_read_word(Address)
- #endif
- #elif (ARCH == ARCH_UC3)
- #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::)
- #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::)
- #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE
- #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \
- printf("%s: Function \"%s\", Line %d: " \
- "Assertion \"%s\" failed.\r\n"), \
- __FILE__, __func__, __LINE__, #Condition); } }MACROE
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h deleted file mode 100644 index 8941f7c0c..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h +++ /dev/null @@ -1,84 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Supported library architecture defines.
- *
- * \copydetails Group_Architectures
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_Architectures Hardware Architectures
- * \brief Supported library architecture defines.
- *
- * Architecture macros for selecting the desired target microcontroller architecture. One of these values should be
- * defined as the value of \c ARCH in the user project makefile via the \c -D compiler switch to GCC, to select the
- * target architecture.
- *
- * The selected architecture should remain consistent with the makefile \c ARCH value, which is used to select the
- * underlying driver source files for each architecture.
- *
- * @{
- */
-
-#ifndef __LUFA_ARCHITECTURES_H__
-#define __LUFA_ARCHITECTURES_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Selects the Atmel 8-bit AVR (AT90USB* and ATMEGA*U* chips) architecture. */
- #define ARCH_AVR8 0
-
- /** Selects the Atmel 32-bit UC3 AVR (AT32UC3* chips) architecture. */
- #define ARCH_UC3 1
-
- /** Selects the Atmel XMEGA AVR (ATXMEGA*U chips) architecture. */
- #define ARCH_XMEGA 2
-
- #if !defined(__DOXYGEN__)
- #define ARCH_ ARCH_AVR8
-
- #if !defined(ARCH)
- #define ARCH ARCH_AVR8
- #endif
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h deleted file mode 100644 index fce75d0ed..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h +++ /dev/null @@ -1,150 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Special function/variable attribute macros.
- *
- * \copydetails Group_FuncVarAttributes
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_FuncVarAttributes Function/Variable Attributes
- * \brief Special function/variable attribute macros.
- *
- * This module contains macros for applying specific attributes to functions and variables to control various
- * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype
- * or variable declaration in any order, and multiple attributes can be specified for a single item via a space
- * separated list.
- *
- * On incompatible versions of GCC or on other compilers, these macros evaluate to nothing unless they are
- * critical to the code's function and thus must throw a compile error when used.
- *
- * @{
- */
-
-#ifndef __LUFA_ATTR_H__
-#define __LUFA_ATTR_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (__GNUC__ >= 3) || defined(__DOXYGEN__)
- /** Indicates to the compiler that the function can not ever return, so that any stack restoring or
- * return code may be omitted by the compiler in the resulting binary.
- */
- #define ATTR_NO_RETURN __attribute__ ((noreturn))
-
- /** Indicates that the function returns a value which should not be ignored by the user code. When
- * applied, any ignored return value from calling the function will produce a compiler warning.
- */
- #define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result))
-
- /** Indicates that the specified parameters of the function are pointers which should never be \c NULL.
- * When applied as a 1-based comma separated list the compiler will emit a warning if the specified
- * parameters are known at compiler time to be \c NULL at the point of calling the function.
- */
- #define ATTR_NON_NULL_PTR_ARG(...) __attribute__ ((nonnull (__VA_ARGS__)))
-
- /** Removes any preamble or postamble from the function. When used, the function will not have any
- * register or stack saving code. This should be used with caution, and when used the programmer
- * is responsible for maintaining stack and register integrity.
- */
- #define ATTR_NAKED __attribute__ ((naked))
-
- /** Prevents the compiler from considering a specified function for in-lining. When applied, the given
- * function will not be in-lined under any circumstances.
- */
- #define ATTR_NO_INLINE __attribute__ ((noinline))
-
- /** Forces the compiler to inline the specified function. When applied, the given function will be
- * in-lined under all circumstances.
- */
- #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline))
-
- /** Indicates that the specified function is pure, in that it has no side-effects other than global
- * or parameter variable access.
- */
- #define ATTR_PURE __attribute__ ((pure))
-
- /** Indicates that the specified function is constant, in that it has no side effects other than
- * parameter access.
- */
- #define ATTR_CONST __attribute__ ((const))
-
- /** Marks a given function as deprecated, which produces a warning if the function is called. */
- #define ATTR_DEPRECATED __attribute__ ((deprecated))
-
- /** Marks a function as a weak reference, which can be overridden by other functions with an
- * identical name (in which case the weak reference is discarded at link time).
- */
- #define ATTR_WEAK __attribute__ ((weak))
- #endif
-
- /** Forces the compiler to not automatically zero the given global variable on startup, so that the
- * current RAM contents is retained. Under most conditions this value will be random due to the
- * behavior of volatile memory once power is removed, but may be used in some specific circumstances,
- * like the passing of values back after a system watchdog reset.
- */
- #define ATTR_NO_INIT __attribute__ ((section (".noinit")))
-
- /** Places the function in one of the initialization sections, which execute before the main function
- * of the application. Refer to the avr-libc manual for more information on the initialization sections.
- *
- * \param[in] SectionIndex Initialization section number where the function should be placed.
- */
- #define ATTR_INIT_SECTION(SectionIndex) __attribute__ ((used, naked, section (".init" #SectionIndex )))
-
- /** Marks a function as an alias for another function.
- *
- * \param[in] Func Name of the function which the given function name should alias.
- */
- #define ATTR_ALIAS(Func) __attribute__ ((alias( #Func )))
-
- /** Marks a variable or struct element for packing into the smallest space available, omitting any
- * alignment bytes usually added between fields to optimize field accesses.
- */
- #define ATTR_PACKED __attribute__ ((packed))
-
- /** Indicates the minimum alignment in bytes for a variable or struct element.
- *
- * \param[in] Bytes Minimum number of bytes the item should be aligned to.
- */
- #define ATTR_ALIGNED(Bytes) __attribute__ ((aligned(Bytes)))
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h deleted file mode 100644 index 4c152dab2..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h +++ /dev/null @@ -1,231 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Supported pre-made board hardware defines.
- *
- * \copydetails Group_BoardTypes
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_BoardTypes Board Types
- * \brief Supported pre-made board hardware defines.
- *
- * Board macros for indicating the chosen physical board hardware to the library. These macros should be used when
- * defining the \c BOARD token to the chosen hardware via the \c -D switch in the project makefile. If a custom
- * board is used, the \ref BOARD_NONE or \ref BOARD_USER values should be selected.
- *
- * @{
- */
-
-#ifndef __LUFA_BOARDTYPES_H__
-#define __LUFA_BOARDTYPES_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Selects the user-defined board drivers, which should be placed in the user project's folder
- * under a directory named \c /Board/. Each board driver should be named identically to the LUFA
- * master board driver (i.e., driver in the \c LUFA/Drivers/Board directory) so that the library
- * can correctly identify it.
- */
- #define BOARD_USER 0
-
- /** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers
- * such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */
- #define BOARD_NONE 1
-
- /** Selects the USBKEY specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_USBKEY 2
-
- /** Selects the STK525 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_STK525 3
-
- /** Selects the STK526 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_STK526 4
-
- /** Selects the RZUSBSTICK specific board drivers, including the driver for the boards LEDs. */
- #define BOARD_RZUSBSTICK 5
-
- /** Selects the ATAVRUSBRF01 specific board drivers, including the driver for the board LEDs. */
- #define BOARD_ATAVRUSBRF01 6
-
- /** Selects the BUMBLEB specific board drivers, using the officially recommended peripheral layout. */
- #define BOARD_BUMBLEB 7
-
- /** Selects the XPLAIN (Revision 2 or newer) specific board drivers, including LED and Dataflash drivers. */
- #define BOARD_XPLAIN 8
-
- /** Selects the XPLAIN (Revision 1) specific board drivers, including LED and Dataflash drivers. */
- #define BOARD_XPLAIN_REV1 9
-
- /** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_EVK527 10
-
- /** Selects the Teensy version 1.x specific board drivers, including the driver for the board LEDs. */
- #define BOARD_TEENSY 11
-
- /** Selects the USBTINY MKII specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USBTINYMKII 12
-
- /** Selects the Benito specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_BENITO 13
-
- /** Selects the JM-DB-U2 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_JMDBU2 14
-
- /** Selects the Olimex AVR-USB-162 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_OLIMEX162 15
-
- /** Selects the UDIP specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_UDIP 16
-
- /** Selects the BUI specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BUI 17
-
- /** Selects the Arduino Uno specific board drivers, including the driver for the board LEDs. */
- #define BOARD_UNO 18
-
- /** Selects the Busware CUL V3 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_CULV3 19
-
- /** Selects the Blackcat USB JTAG specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BLACKCAT 20
-
- /** Selects the Maximus specific board drivers, including the driver for the board LEDs. */
- #define BOARD_MAXIMUS 21
-
- /** Selects the Minimus specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_MINIMUS 22
-
- /** Selects the Adafruit U4 specific board drivers, including the Button driver. */
- #define BOARD_ADAFRUITU4 23
-
- /** Selects the Microsin AVR-USB162 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_MICROSIN162 24
-
- /** Selects the Kernel Concepts USBFOO specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USBFOO 25
-
- /** Selects the Sparkfun ATMEGA8U2 specific board drivers, including the driver for the board LEDs. */
- #define BOARD_SPARKFUN8U2 26
-
- /** Selects the Atmel EVK1101 specific board drivers, including the Button, Joystick and LED drivers. */
- #define BOARD_EVK1101 27
-
- /** Selects the Busware TUL specific board drivers, including the Button and LED drivers. */
- #define BOARD_TUL 28
-
- /** Selects the Atmel EVK1100 specific board drivers, including the Button, Joystick and LED drivers. */
- #define BOARD_EVK1100 29
-
- /** Selects the Atmel EVK1104 specific board drivers, including the Button and LED drivers. */
- #define BOARD_EVK1104 30
-
- /** Selects the Atmel XMEGA A3BU Xplained specific board drivers, including Dataflash, Button and LED drivers. */
- #define BOARD_A3BU_XPLAINED 31
-
- /** Selects the Teensy version 2.x specific board drivers, including the driver for the board LEDs. */
- #define BOARD_TEENSY2 32
-
- /** Selects the USB2AX version 1 and 2 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USB2AX 33
-
- /** Selects the USB2AX version 3 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USB2AX_V3 34
-
- /** Selects the Micropendous 32U2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_32U2 35
-
- /** Selects the Micropendous A specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_A 36
-
- /** Selects the Micropendous 1 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_1 37
-
- /** Selects the Micropendous 2 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_2 38
-
- /** Selects the Micropendous 3 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_3 39
-
- /** Selects the Micropendous 4 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_4 40
-
- /** Selects the Micropendous DIP specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_DIP 41
-
- /** Selects the Micropendous (Arduino-like) revision 1 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_REV1 42
-
- /** Selects the Micropendous (Arduino-like) revision 2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_REV2 43
-
- /** Selects the XMEGA B1 Xplained specific board drivers, including the Button and LED drivers. */
- #define BOARD_B1_XPLAINED 44
-
- /** Selects the Bitwizard Multio specific board drivers, including the driver for the board LEDs. */
- #define BOARD_MULTIO 45
-
- /** Selects the Bitwizard Big-Multio specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BIGMULTIO 46
-
- /** Selects the DorkbotPDX Duce specific board drivers, including the driver for the board LEDs. */
- #define BOARD_DUCE 47
-
- /** Selects the Olimex AVR-USB-32U4 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEX32U4 48
-
- /** Selects the Olimex AVR-USB-T32U4 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEXT32U4 49
-
- /** Selects the Olimex AVR-ISP-MK2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEXISPMK2 50
-
-
- #if !defined(__DOXYGEN__)
- #define BOARD_ BOARD_NONE
-
- #if !defined(BOARD)
- #define BOARD BOARD_NONE
- #endif
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Common.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Common.h deleted file mode 100644 index cf1f49b9d..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Common.h +++ /dev/null @@ -1,381 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \dir
- * \brief Common library header files.
- *
- * This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
- * user applications.
- */
-
-/** \file
- * \brief Common library convenience headers, macros and functions.
- *
- * \copydetails Group_Common
- */
-
-/** \defgroup Group_Common Common Utility Headers - LUFA/Drivers/Common/Common.h
- * \brief Common library convenience headers, macros and functions.
- *
- * Common utility headers containing macros, functions, enums and types which are common to all
- * aspects of the library.
- *
- * @{
- */
-
-/** \defgroup Group_GlobalInt Global Interrupt Macros
- * \brief Convenience macros for the management of interrupts globally within the device.
- *
- * Macros and functions to create and control global interrupts within the device.
- */
-
-#ifndef __LUFA_COMMON_H__
-#define __LUFA_COMMON_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_COMMON_H
-
- /* Includes: */
- #include <stdint.h>
- #include <stdbool.h>
- #include <string.h>
- #include <stddef.h>
-
- #include "Architectures.h"
- #include "BoardTypes.h"
- #include "ArchitectureSpecific.h"
- #include "CompilerSpecific.h"
- #include "Attributes.h"
-
- #if defined(USE_LUFA_CONFIG_HEADER)
- #include "LUFAConfig.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Architecture specific utility includes: */
- #if defined(__DOXYGEN__)
- /** Type define for an unsigned integer the same width as the selected architecture's machine register.
- * This is distinct from the non-specific standard int data type, whose width is machine dependant but
- * which may not reflect the actual machine register width on some targets (e.g. AVR8).
- */
- typedef MACHINE_REG_t uint_reg_t;
- #elif (ARCH == ARCH_AVR8)
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <avr/pgmspace.h>
- #include <avr/eeprom.h>
- #include <avr/boot.h>
- #include <math.h>
- #include <util/delay.h>
-
- typedef uint8_t uint_reg_t;
-
- #define ARCH_HAS_EEPROM_ADDRESS_SPACE
- #define ARCH_HAS_FLASH_ADDRESS_SPACE
- #define ARCH_HAS_MULTI_ADDRESS_SPACE
- #define ARCH_LITTLE_ENDIAN
-
- #include "Endianness.h"
- #elif (ARCH == ARCH_UC3)
- #include <avr32/io.h>
- #include <math.h>
-
- // === TODO: Find abstracted way to handle these ===
- #define PROGMEM
- #define pgm_read_byte(x) *x
- #define memcmp_P(...) memcmp(__VA_ARGS__)
- #define memcpy_P(...) memcpy(__VA_ARGS__)
- // =================================================
-
- typedef uint32_t uint_reg_t;
-
- #define ARCH_BIG_ENDIAN
-
- #include "Endianness.h"
- #elif (ARCH == ARCH_XMEGA)
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <avr/pgmspace.h>
- #include <avr/eeprom.h>
- #include <math.h>
- #include <util/delay.h>
-
- typedef uint8_t uint_reg_t;
-
- #define ARCH_HAS_EEPROM_ADDRESS_SPACE
- #define ARCH_HAS_FLASH_ADDRESS_SPACE
- #define ARCH_HAS_MULTI_ADDRESS_SPACE
- #define ARCH_LITTLE_ENDIAN
-
- #include "Endianness.h"
- #else
- #error Unknown device architecture specified.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Macro for encasing other multi-statement macros. This should be used along with an opening brace
- * before the start of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discrete block and not as a list of separate statements which may cause problems when used as
- * a block (such as inline \c if statements).
- */
- #define MACROS do
-
- /** Macro for encasing other multi-statement macros. This should be used along with a preceding closing
- * brace at the end of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discrete block and not as a list of separate statements which may cause problems when used as
- * a block (such as inline \c if statements).
- */
- #define MACROE while (0)
-
- /** Convenience macro to determine the larger of two values.
- *
- * \attention This macro should only be used with operands that do not have side effects from being evaluated
- * multiple times.
- *
- * \param[in] x First value to compare
- * \param[in] y First value to compare
- *
- * \return The larger of the two input parameters
- */
- #if !defined(MAX) || defined(__DOXYGEN__)
- #define MAX(x, y) (((x) > (y)) ? (x) : (y))
- #endif
-
- /** Convenience macro to determine the smaller of two values.
- *
- * \attention This macro should only be used with operands that do not have side effects from being evaluated
- * multiple times.
- *
- * \param[in] x First value to compare
- * \param[in] y First value to compare
- *
- * \return The smaller of the two input parameters
- */
- #if !defined(MIN) || defined(__DOXYGEN__)
- #define MIN(x, y) (((x) < (y)) ? (x) : (y))
- #endif
-
- #if !defined(STRINGIFY) || defined(__DOXYGEN__)
- /** Converts the given input into a string, via the C Preprocessor. This macro puts literal quotation
- * marks around the input, converting the source into a string literal.
- *
- * \param[in] x Input to convert into a string literal.
- *
- * \return String version of the input.
- */
- #define STRINGIFY(x) #x
-
- /** Converts the given input into a string after macro expansion, via the C Preprocessor. This macro puts
- * literal quotation marks around the expanded input, converting the source into a string literal.
- *
- * \param[in] x Input to expand and convert into a string literal.
- *
- * \return String version of the expanded input.
- */
- #define STRINGIFY_EXPANDED(x) STRINGIFY(x)
- #endif
-
- #if !defined(ISR) || defined(__DOXYGEN__)
- /** Macro for the definition of interrupt service routines, so that the compiler can insert the required
- * prologue and epilogue code to properly manage the interrupt routine without affecting the main thread's
- * state with unintentional side-effects.
- *
- * Interrupt handlers written using this macro may still need to be registered with the microcontroller's
- * Interrupt Controller (if present) before they will properly handle incoming interrupt events.
- *
- * \note This macro is only supplied on some architectures, where the standard library does not include a valid
- * definition. If an existing definition exists, the alternative definition here will be ignored.
- *
- * \ingroup Group_GlobalInt
- *
- * \param[in] Name Unique name of the interrupt service routine.
- */
- #define ISR(Name, ...) void Name (void) __attribute__((__interrupt__)) __VA_ARGS__; void Name (void)
- #endif
-
- /* Inline Functions: */
- /** Function to reverse the individual bits in a byte - i.e. bit 7 is moved to bit 0, bit 6 to bit 1,
- * etc.
- *
- * \param[in] Byte Byte of data whose bits are to be reversed.
- *
- * \return Input data with the individual bits reversed (mirrored).
- */
- static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint8_t BitReverse(uint8_t Byte)
- {
- Byte = (((Byte & 0xF0) >> 4) | ((Byte & 0x0F) << 4));
- Byte = (((Byte & 0xCC) >> 2) | ((Byte & 0x33) << 2));
- Byte = (((Byte & 0xAA) >> 1) | ((Byte & 0x55) << 1));
-
- return Byte;
- }
-
- /** Function to perform a blocking delay for a specified number of milliseconds. The actual delay will be
- * at a minimum the specified number of milliseconds, however due to loop overhead and internal calculations
- * may be slightly higher.
- *
- * \param[in] Milliseconds Number of milliseconds to delay
- */
- static inline void Delay_MS(uint16_t Milliseconds) ATTR_ALWAYS_INLINE;
- static inline void Delay_MS(uint16_t Milliseconds)
- {
- #if (ARCH == ARCH_AVR8)
- if (GCC_IS_COMPILE_CONST(Milliseconds))
- {
- _delay_ms(Milliseconds);
- }
- else
- {
- while (Milliseconds--)
- _delay_ms(1);
- }
- #elif (ARCH == ARCH_UC3)
- while (Milliseconds--)
- {
- __builtin_mtsr(AVR32_COUNT, 0);
- while ((uint32_t)__builtin_mfsr(AVR32_COUNT) < (F_CPU / 1000));
- }
- #elif (ARCH == ARCH_XMEGA)
- if (GCC_IS_COMPILE_CONST(Milliseconds))
- {
- _delay_ms(Milliseconds);
- }
- else
- {
- while (Milliseconds--)
- _delay_ms(1);
- }
- #endif
- }
-
- /** Retrieves a mask which contains the current state of the global interrupts for the device. This
- * value can be stored before altering the global interrupt enable state, before restoring the
- * flag(s) back to their previous values after a critical section using \ref SetGlobalInterruptMask().
- *
- * \ingroup Group_GlobalInt
- *
- * \return Mask containing the current Global Interrupt Enable Mask bit(s).
- */
- static inline uint_reg_t GetGlobalInterruptMask(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint_reg_t GetGlobalInterruptMask(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- return SREG;
- #elif (ARCH == ARCH_UC3)
- return __builtin_mfsr(AVR32_SR);
- #elif (ARCH == ARCH_XMEGA)
- return SREG;
- #endif
- }
-
- /** Sets the global interrupt enable state of the microcontroller to the mask passed into the function.
- * This can be combined with \ref GetGlobalInterruptMask() to save and restore the Global Interrupt Enable
- * Mask bit(s) of the device after a critical section has completed.
- *
- * \ingroup Group_GlobalInt
- *
- * \param[in] GlobalIntState Global Interrupt Enable Mask value to use
- */
- static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) ATTR_ALWAYS_INLINE;
- static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- SREG = GlobalIntState;
- #elif (ARCH == ARCH_UC3)
- if (GlobalIntState & AVR32_SR_GM)
- __builtin_ssrf(AVR32_SR_GM_OFFSET);
- else
- __builtin_csrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- SREG = GlobalIntState;
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /** Enables global interrupt handling for the device, allowing interrupts to be handled.
- *
- * \ingroup Group_GlobalInt
- */
- static inline void GlobalInterruptEnable(void) ATTR_ALWAYS_INLINE;
- static inline void GlobalInterruptEnable(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- sei();
- #elif (ARCH == ARCH_UC3)
- __builtin_csrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- sei();
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /** Disabled global interrupt handling for the device, preventing interrupts from being handled.
- *
- * \ingroup Group_GlobalInt
- */
- static inline void GlobalInterruptDisable(void) ATTR_ALWAYS_INLINE;
- static inline void GlobalInterruptDisable(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- cli();
- #elif (ARCH == ARCH_UC3)
- __builtin_ssrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- cli();
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h deleted file mode 100644 index 22afe940b..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h +++ /dev/null @@ -1,97 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Compiler specific definitions for code optimization and correctness.
- *
- * \copydetails Group_CompilerSpecific
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_CompilerSpecific Compiler Specific Definitions
- * \brief Compiler specific definitions for code optimization and correctness.
- *
- * Compiler specific definitions to expose certain compiler features which may increase the level of code optimization
- * for a specific compiler, or correct certain issues that may be present such as memory barriers for use in conjunction
- * with atomic variable access.
- *
- * Where possible, on alternative compilers, these macros will either have no effect, or default to returning a sane value
- * so that they can be used in existing code without the need for extra compiler checks in the user application code.
- *
- * @{
- */
-
-#ifndef __LUFA_COMPILERSPEC_H__
-#define __LUFA_COMPILERSPEC_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if defined(__GNUC__) || defined(__DOXYGEN__)
- /** Forces GCC to use pointer indirection (via the device's pointer register pairs) when accessing the given
- * struct pointer. In some cases GCC will emit non-optimal assembly code when accessing a structure through
- * a pointer, resulting in a larger binary. When this macro is used on a (non \c const) structure pointer before
- * use, it will force GCC to use pointer indirection on the elements rather than direct store and load
- * instructions.
- *
- * \param[in, out] StructPtr Pointer to a structure which is to be forced into indirect access mode.
- */
- #define GCC_FORCE_POINTER_ACCESS(StructPtr) __asm__ __volatile__("" : "=b" (StructPtr) : "0" (StructPtr))
-
- /** Forces GCC to create a memory barrier, ensuring that memory accesses are not reordered past the barrier point.
- * This can be used before ordering-critical operations, to ensure that the compiler does not re-order the resulting
- * assembly output in an unexpected manner on sections of code that are ordering-specific.
- */
- #define GCC_MEMORY_BARRIER() __asm__ __volatile__("" ::: "memory");
-
- /** Determines if the specified value can be determined at compile-time to be a constant value when compiling under GCC.
- *
- * \param[in] x Value to check compile-time constantness of.
- *
- * \return Boolean true if the given value is known to be a compile time constant, false otherwise.
- */
- #define GCC_IS_COMPILE_CONST(x) __builtin_constant_p(x)
- #else
- #define GCC_FORCE_POINTER_ACCESS(StructPtr)
- #define GCC_MEMORY_BARRIER()
- #define GCC_IS_COMPILE_CONST(x) 0
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h b/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h deleted file mode 100644 index d0812e4e3..000000000 --- a/tmk_core/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h +++ /dev/null @@ -1,489 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endianness and Byte Ordering macros and functions.
- *
- * \copydetails Group_Endianness
- */
-
-/** \ingroup Group_Endianness
- * \defgroup Group_ByteSwapping Byte Reordering
- * \brief Macros and functions for forced byte reordering.
- */
-
-/** \ingroup Group_Endianness
- * \defgroup Group_EndianConversion Endianness Conversion
- * \brief Macros and functions for automatic endianness conversion.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_Endianness Endianness and Byte Ordering
- * \brief Convenience macros and functions relating to byte (re-)ordering
- *
- * Common library convenience macros and functions relating to byte (re-)ordering.
- *
- * @{
- */
-
-#ifndef __LUFA_ENDIANNESS_H__
-#define __LUFA_ENDIANNESS_H__
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- #if !(defined(ARCH_BIG_ENDIAN) || defined(ARCH_LITTLE_ENDIAN))
- #error ARCH_BIG_ENDIAN or ARCH_LITTLE_ENDIAN not set for the specified architecture.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Swaps the byte ordering of a 16-bit value at compile-time. Do not use this macro for swapping byte orderings
- * of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used
- * inside struct or other variable initializers outside of a function, something that is not possible with the
- * inline function variant.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] x 16-bit value whose byte ordering is to be swapped.
- *
- * \return Input value with the byte ordering reversed.
- */
- #define SWAPENDIAN_16(x) (uint16_t)((((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8))
-
- /** Swaps the byte ordering of a 32-bit value at compile-time. Do not use this macro for swapping byte orderings
- * of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used
- * inside struct or other variable initializers outside of a function, something that is not possible with the
- * inline function variant.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] x 32-bit value whose byte ordering is to be swapped.
- *
- * \return Input value with the byte ordering reversed.
- */
- #define SWAPENDIAN_32(x) (uint32_t)((((x) & 0xFF000000UL) >> 24UL) | (((x) & 0x00FF0000UL) >> 8UL) | \
- (((x) & 0x0000FF00UL) << 8UL) | (((x) & 0x000000FFUL) << 24UL))
-
- #if defined(ARCH_BIG_ENDIAN) && !defined(le16_to_cpu)
- #define le16_to_cpu(x) SwapEndian_16(x)
- #define le32_to_cpu(x) SwapEndian_32(x)
- #define be16_to_cpu(x) (x)
- #define be32_to_cpu(x) (x)
- #define cpu_to_le16(x) SwapEndian_16(x)
- #define cpu_to_le32(x) SwapEndian_32(x)
- #define cpu_to_be16(x) (x)
- #define cpu_to_be32(x) (x)
- #define LE16_TO_CPU(x) SWAPENDIAN_16(x)
- #define LE32_TO_CPU(x) SWAPENDIAN_32(x)
- #define BE16_TO_CPU(x) (x)
- #define BE32_TO_CPU(x) (x)
- #define CPU_TO_LE16(x) SWAPENDIAN_16(x)
- #define CPU_TO_LE32(x) SWAPENDIAN_32(x)
- #define CPU_TO_BE16(x) (x)
- #define CPU_TO_BE32(x) (x)
- #elif !defined(le16_to_cpu)
- /** \name Run-time endianness conversion */
- //@{
-
- /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref LE16_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define le16_to_cpu(x) (x)
-
- /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref LE32_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define le32_to_cpu(x) (x)
-
- /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref BE16_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define be16_to_cpu(x) SwapEndian_16(x)
-
- /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref BE32_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define be32_to_cpu(x) SwapEndian_32(x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_LE16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_le16(x) (x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_LE32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_le32(x) (x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_BE16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_be16(x) SwapEndian_16(x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_BE32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_be32(x) SwapEndian_32(x)
-
- //@}
-
- /** \name Compile-time endianness conversion */
- //@{
-
- /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run time endianness
- * conversion, use \ref le16_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define LE16_TO_CPU(x) (x)
-
- /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run time endianness
- * conversion, use \ref le32_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define LE32_TO_CPU(x) (x)
-
- /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref be16_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define BE16_TO_CPU(x) SWAPENDIAN_16(x)
-
- /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref be32_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define BE32_TO_CPU(x) SWAPENDIAN_32(x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_le16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_LE16(x) (x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_le32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_LE32(x) (x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_be16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_BE16(x) SWAPENDIAN_16(x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_be32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_BE32(x) SWAPENDIAN_32(x)
-
- //! @}
- #endif
-
- /* Inline Functions: */
- /** Function to reverse the byte ordering of the individual bytes in a 16 bit value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] Word Word of data whose bytes are to be swapped.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline uint16_t SwapEndian_16(const uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint16_t SwapEndian_16(const uint16_t Word)
- {
- if (GCC_IS_COMPILE_CONST(Word))
- return SWAPENDIAN_16(Word);
-
- uint8_t Temp;
-
- union
- {
- uint16_t Word;
- uint8_t Bytes[2];
- } Data;
-
- Data.Word = Word;
-
- Temp = Data.Bytes[0];
- Data.Bytes[0] = Data.Bytes[1];
- Data.Bytes[1] = Temp;
-
- return Data.Word;
- }
-
- /** Function to reverse the byte ordering of the individual bytes in a 32 bit value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] DWord Double word of data whose bytes are to be swapped.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline uint32_t SwapEndian_32(const uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint32_t SwapEndian_32(const uint32_t DWord)
- {
- if (GCC_IS_COMPILE_CONST(DWord))
- return SWAPENDIAN_32(DWord);
-
- uint8_t Temp;
-
- union
- {
- uint32_t DWord;
- uint8_t Bytes[4];
- } Data;
-
- Data.DWord = DWord;
-
- Temp = Data.Bytes[0];
- Data.Bytes[0] = Data.Bytes[3];
- Data.Bytes[3] = Temp;
-
- Temp = Data.Bytes[1];
- Data.Bytes[1] = Data.Bytes[2];
- Data.Bytes[2] = Temp;
-
- return Data.DWord;
- }
-
- /** Function to reverse the byte ordering of the individual bytes in a n byte value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed.
- * \param[in] Length Length of the data in bytes.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline void SwapEndian_n(void* const Data,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(1);
- static inline void SwapEndian_n(void* const Data,
- uint8_t Length)
- {
- uint8_t* CurrDataPos = (uint8_t*)Data;
-
- while (Length > 1)
- {
- uint8_t Temp = *CurrDataPos;
- *CurrDataPos = *(CurrDataPos + Length - 1);
- *(CurrDataPos + Length - 1) = Temp;
-
- CurrDataPos++;
- Length -= 2;
- }
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
|