diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/BuildTests')
23 files changed, 0 insertions, 1718 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Board.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Board.h deleted file mode 100644 index 2eb2c536a..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Board.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Custom Board Hardware Information Driver (Template) - * - * This is a stub driver header file, for implementing custom board - * layout hardware with compatible LUFA board specific drivers. If - * the library is configured to use the BOARD_USER board mode, this - * driver file should be completed and copied into the "/Board/" folder - * inside the application's folder. - * - * This stub is for the board-specific component of the LUFA Board Hardware - * information driver. - */ - -#ifndef __BOARD_USER_H__ -#define __BOARD_USER_H__ - - /* Includes: */ - // TODO: Add any required includes here - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_BOARD_H) - #error Do not include this file directly. Include LUFA/Drivers/Board/Board.h instead. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Indicates the board has a hardware Buttons mounted if defined. */ -// #define BOARD_HAS_BUTTONS - - /** Indicates the board has a hardware Dataflash mounted if defined. */ -// #define BOARD_HAS_DATAFLASH - - /** Indicates the board has a hardware Joystick mounted if defined. */ -// #define BOARD_HAS_JOYSTICK - - /** Indicates the board has a hardware LEDs mounted if defined. */ -// #define BOARD_HAS_LEDS - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Buttons.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Buttons.h deleted file mode 100644 index b14388527..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Buttons.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Custom Board Button Hardware Driver (Template) - * - * This is a stub driver header file, for implementing custom board - * layout hardware with compatible LUFA board specific drivers. If - * the library is configured to use the BOARD_USER board mode, this - * driver file should be completed and copied into the "/Board/" folder - * inside the application's folder. - * - * This stub is for the board-specific component of the LUFA Buttons driver, - * for the control of physical board-mounted GPIO pushbuttons. - */ - -#ifndef __BUTTONS_USER_H__ -#define __BUTTONS_USER_H__ - - /* Includes: */ - // TODO: Add any required includes here - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_BUTTONS_H) - #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead. - #endif - - #define BOARD_DUMMY_BUTTONS_IMPLEMENTATION - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Button mask for the first button on the board. */ - #define BUTTONS_BUTTON1 (1 << 0) - - /* Inline Functions: */ - #if !defined(__DOXYGEN__) - static inline void Buttons_Init(void) - { - - } - - static inline void Buttons_Disable(void) - { - - } - - static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Buttons_GetStatus(void) - { - return 0; - } - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Dataflash.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Dataflash.h deleted file mode 100644 index f32e398ea..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Dataflash.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Custom Board Dataflash Hardware Driver (Template) - * - * This is a stub driver header file, for implementing custom board - * layout hardware with compatible LUFA board specific drivers. If - * the library is configured to use the BOARD_USER board mode, this - * driver file should be completed and copied into the "/Board/" folder - * inside the application's folder. - * - * This stub is for the board-specific component of the LUFA Dataflash - * driver. -*/ - -#ifndef __DATAFLASH_USER_H__ -#define __DATAFLASH_USER_H__ - - /* Includes: */ - // TODO: Add any required includes here - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_DATAFLASH_H) - #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead. - #endif - - #define BOARD_DUMMY_DATAFLASH_IMPLEMENTATION - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Macros: */ - #define DATAFLASH_CHIPCS_MASK 0 - #define DATAFLASH_CHIPCS_DDR 0 - #define DATAFLASH_CHIPCS_PORT 0 - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Constant indicating the total number of dataflash ICs mounted on the selected board. */ - #define DATAFLASH_TOTALCHIPS 1 - - /** Mask for no dataflash chip selected. */ - #define DATAFLASH_NO_CHIP 0 - - /** Mask for the first dataflash chip selected. */ - #define DATAFLASH_CHIP1 0 - - /** Mask for the second dataflash chip selected. */ - #define DATAFLASH_CHIP2 0 - - /** Internal main memory page size for the board's dataflash ICs. */ - #define DATAFLASH_PAGE_SIZE 0 - - /** Total number of pages inside each of the board's dataflash ICs. */ - #define DATAFLASH_PAGES 0 - - /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. - * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. - */ - static inline void Dataflash_Init(void) - { - - } - - /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. - * - * \param[in] Byte Byte of data to send to the dataflash - * - * \return Last response byte from the dataflash - */ - static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) - { - return 0; - } - - /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. - * - * \param[in] Byte Byte of data to send to the dataflash - */ - static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline void Dataflash_SendByte(const uint8_t Byte) - { - - } - - /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. - * - * \return Last response byte from the dataflash - */ - static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Dataflash_ReceiveByte(void) - { - return 0; - } - - /** Determines the currently selected dataflash chip. - * - * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected - * or a DATAFLASH_CHIPn mask (where n is the chip number). - */ - static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Dataflash_GetSelectedChip(void) - { - return 0; - } - - /** Selects the given dataflash chip. - * - * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of a \c DATAFLASH_CHIPn mask (where n is - * the chip number). - */ - static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; - static inline void Dataflash_SelectChip(const uint8_t ChipMask) - { - - } - - /** Deselects the current dataflash chip, so that no dataflash is selected. */ - static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE; - static inline void Dataflash_DeselectChip(void) - { - - } - - /** Selects a dataflash IC from the given page number, which should range from 0 to - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one - * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside - * the total number of pages contained in the boards dataflash ICs, all dataflash ICs - * are deselected. - * - * \param[in] PageAddress Address of the page to manipulate, ranging from - * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). - */ - static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) - { - - } - - /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive - * a new command. - */ - static inline void Dataflash_ToggleSelectedChipCS(void) - { - - } - - /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main - * memory page program or main memory to buffer transfer. - */ - static inline void Dataflash_WaitWhileBusy(void) - { - - } - - /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-bit address. - * - * \param[in] PageAddress Page address within the selected dataflash IC - * \param[in] BufferByte Address within the dataflash's buffer - */ - static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, const uint16_t BufferByte) - { - - } - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Joystick.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Joystick.h deleted file mode 100644 index 4aa45ab67..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/Joystick.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Custom Board Joystick Hardware Driver (Template) - * - * This is a stub driver header file, for implementing custom board - * layout hardware with compatible LUFA board specific drivers. If - * the library is configured to use the BOARD_USER board mode, this - * driver file should be completed and copied into the "/Board/" folder - * inside the application's folder. - * - * This stub is for the board-specific component of the LUFA Joystick - * driver, for a digital four-way (plus button) joystick. -*/ - -#ifndef __JOYSTICK_USER_H__ -#define __JOYSTICK_USER_H__ - - /* Includes: */ - // TODO: Add any required includes here - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_JOYSTICK_H) - #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead. - #endif - - #define BOARD_DUMMY_JOYSTICK_IMPLEMENTATION - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Mask for the joystick being pushed in the left direction. */ - #define JOY_LEFT 0 - - /** Mask for the joystick being pushed in the right direction. */ - #define JOY_RIGHT 0 - - /** Mask for the joystick being pushed in the upward direction. */ - #define JOY_UP 0 - - /** Mask for the joystick being pushed in the downward direction. */ - #define JOY_DOWN 0 - - /** Mask for the joystick being pushed inward. */ - #define JOY_PRESS 0 - - /* Inline Functions: */ - #if !defined(__DOXYGEN__) - static inline void Joystick_Init(void) - { - - } - - static inline void Joystick_Disable(void) - { - - } - - static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Joystick_GetStatus(void) - { - return 0; - } - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/LEDs.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/LEDs.h deleted file mode 100644 index a146e99c3..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Board/LEDs.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Custom Board LED Hardware Driver (Template) - * - * This is a stub driver header file, for implementing custom board - * layout hardware with compatible LUFA board specific drivers. If - * the library is configured to use the BOARD_USER board mode, this - * driver file should be completed and copied into the "/Board/" folder - * inside the application's folder. - * - * This stub is for the board-specific component of the LUFA LEDs driver, - * for the LEDs (up to four) mounted on most development boards. -*/ - -#ifndef __LEDS_USER_H__ -#define __LEDS_USER_H__ - - /* Includes: */ - // TODO: Add any required includes here - -/* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_LEDS_H) - #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. - #endif - - #define BOARD_DUMMY_LEDS_IMPLEMENTATION - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** LED mask for the first LED on the board. */ - #define LEDS_LED1 (1 << 0) - - /** LED mask for the second LED on the board. */ - #define LEDS_LED2 (1 << 1) - - /** LED mask for the third LED on the board. */ - #define LEDS_LED3 (1 << 2) - - /** LED mask for the fourth LED on the board. */ - #define LEDS_LED4 (1 << 3) - - /** LED mask for all the LEDs on the board. */ - #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4) - - /** LED mask for none of the board LEDs. */ - #define LEDS_NO_LEDS 0 - - /* Inline Functions: */ - #if !defined(__DOXYGEN__) - static inline void LEDs_Init(void) - { - - } - - static inline void LEDs_Disable(void) - { - - } - - static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) - { - - } - - static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) - { - - } - - static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) - { - - } - - static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) - { - - } - - static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) - { - - } - - static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; - static inline uint8_t LEDs_GetLEDs(void) - { - return 0; - } - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/BoardDeviceMap.cfg b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/BoardDeviceMap.cfg deleted file mode 100644 index 3fee2f1e3..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/BoardDeviceMap.cfg +++ /dev/null @@ -1,87 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -# ============================================================================= -# Board configuration map script, processed with the "BoardDriverTest" -# makefile. This script file maps the possible LUFA target BOARD makefile -# values in user projects to a specific architecture and device. This mapping is -# then used by the makefile to build all possible drivers for that board, to -# detect any missing or erroneous functions. To add a new board mapping, use -# the syntax: -# -# BOARD DEFINE = {ARCH} : {MCU} : -# -# And re-run the makefile. Note that each board may have only one target. -# ============================================================================= -# -# -# ----------------- AVR8 Boards ------------------ -BOARD_ADAFRUITU4 = AVR8 : atmega32u4 : -BOARD_ATAVRUSBRF01 = AVR8 : at90usb1287 : -BOARD_BENITO = AVR8 : at90usb162 : -BOARD_BIGMULTIO = AVR8 : atmega32u4 : -BOARD_BLACKCAT = AVR8 : at90usb162 : -BOARD_BUI = AVR8 : at90usb646 : -BOARD_BUMBLEB = AVR8 : at90usb162 : -BOARD_CULV3 = AVR8 : atmega32u4 : -BOARD_DUCE = AVR8 : atmega32u2 : -BOARD_EVK527 = AVR8 : atmega32u4 : -BOARD_JMDBU2 = AVR8 : atmega32u2 : -BOARD_LEONARDO = AVR8 : atmega32u4 : -BOARD_MAXIMUS = AVR8 : at90usb162 : -BOARD_MICROPENDOUS_32U2 = AVR8 : atmega32u2 : -BOARD_MICROPENDOUS_A = AVR8 : at90usb1287 : -BOARD_MICROPENDOUS_1 = AVR8 : at90usb162 : -BOARD_MICROPENDOUS_2 = AVR8 : atmega32u4 : -BOARD_MICROPENDOUS_3 = AVR8 : at90usb1287 : -BOARD_MICROPENDOUS_4 = AVR8 : at90usb1287 : -BOARD_MICROPENDOUS_DIP = AVR8 : at90usb1287 : -BOARD_MICROPENDOUS_REV1 = AVR8 : at90usb1287 : -BOARD_MICROPENDOUS_REV2 = AVR8 : at90usb1287 : -BOARD_MICROSIN162 = AVR8 : atmega162 : -BOARD_MINIMUS = AVR8 : atmega32u2 : -BOARD_MULTIO = AVR8 : at90usb162 : -BOARD_NONE = AVR8 : at90usb1287 : -BOARD_OLIMEX162 = AVR8 : at90usb162 : -BOARD_OLIMEX32U4 = AVR8 : atmega32u4 : -BOARD_OLIMEXT32U4 = AVR8 : atmega32u4 : -BOARD_OLIMEXISPMK2 = AVR8 : at90usb162 : -BOARD_RZUSBSTICK = AVR8 : at90usb1287 : -BOARD_SPARKFUN8U2 = AVR8 : atmega8u2 : -BOARD_STK525 = AVR8 : at90usb647 : -BOARD_STK526 = AVR8 : at90usb162 : -BOARD_TEENSY = AVR8 : at90usb162 : -BOARD_TEENSY2 = AVR8 : at90usb646 : -BOARD_TUL = AVR8 : atmega32u4 : -BOARD_UDIP = AVR8 : atmega32u2 : -BOARD_UNO = AVR8 : atmega8u2 : -BOARD_USB2AX = AVR8 : atmega32u2 : -BOARD_USB2AX_V3 = AVR8 : atmega32u2 : -BOARD_USB2AX_V31 = AVR8 : atmega32u2 : -BOARD_USBFOO = AVR8 : atmega162 : -BOARD_USBKEY = AVR8 : at90usb1287 : -BOARD_USBTINYMKII = AVR8 : at90usb162 : -BOARD_USER = AVR8 : at90usb1287 : -BOARD_XPLAIN = AVR8 : at90usb1287 : -BOARD_XPLAIN_REV1 = AVR8 : at90usb1287 : -BOARD_STANGE_ISP = AVR8 : at90usb162 : -BOARD_U2S = AVR8 : atmega32u2 : -BOARD_YUN = AVR8 : atmega32u4 : -BOARD_MICRO = AVR8 : atmega32u4 : -# -# ----------------- XMEGA Boards ----------------- -BOARD_A3BU_XPLAINED = XMEGA : atxmega256a3bu : -BOARD_B1_XPLAINED = XMEGA : atxmega128b1 : -BOARD_C3_XPLAINED = XMEGA : atxmega384c3 : -# -# ------------------ UC3 Boards ------------------ -BOARD_EVK1100 = UC3 : uc3a0512 : -BOARD_EVK1101 = UC3 : uc3b0256 : -BOARD_EVK1104 = UC3 : uc3a3256 : -BOARD_UC3A3_XPLAINED = UC3 : uc3a3256 : -# diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Test.c b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Test.c deleted file mode 100644 index 0105886b2..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/Test.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include <LUFA/Common/Common.h> -#include <LUFA/Drivers/Board/Board.h> -#include <LUFA/Drivers/Board/Buttons.h> -#include <LUFA/Drivers/Board/Dataflash.h> -#include <LUFA/Drivers/Board/LEDs.h> -#include <LUFA/Drivers/Board/Joystick.h> - -#if defined(BOARD_HAS_BUTTONS) == defined(BOARD_DUMMY_BUTTONS_IMPLEMENTATION) - #error Mismatch between BOARD_HAS_BUTTONS and implementation. -#endif - -#if defined(BOARD_HAS_DATAFLASH) == defined(BOARD_DUMMY_DATAFLASH_IMPLEMENTATION) - #error Mismatch between BOARD_HAS_DATAFLASH and implementation. -#endif - -#if defined(BOARD_HAS_LEDS) == defined(BOARD_DUMMY_LEDS_IMPLEMENTATION) - #error Mismatch between BOARD_HAS_LEDS and implementation. -#endif - -#if defined(BOARD_HAS_JOYSTICK) == defined(BOARD_DUMMY_JOYSTICK_IMPLEMENTATION) - #error Mismatch between BOARD_HAS_JOYSTICK and implementation. -#endif - -int main(void) -{ - uint_reg_t Dummy; - - /* ============================= - * Buttons Compile Check - * ============================= */ - // cppcheck-suppress redundantAssignment - Dummy = BUTTONS_BUTTON1; - Buttons_Init(); - // cppcheck-suppress redundantAssignment - Dummy = Buttons_GetStatus(); - Buttons_Disable(); - - /* ============================= - * Dataflash Compile Check - * ============================= */ - // cppcheck-suppress redundantAssignment - Dummy = DATAFLASH_TOTALCHIPS + DATAFLASH_NO_CHIP + DATAFLASH_CHIP1 + DATAFLASH_PAGE_SIZE + DATAFLASH_PAGES; - Dataflash_Init(); - Dataflash_TransferByte(0); - Dataflash_SendByte(0); - // cppcheck-suppress redundantAssignment - Dummy = Dataflash_ReceiveByte(); - // cppcheck-suppress redundantAssignment - Dummy = Dataflash_GetSelectedChip(); - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_DeselectChip(); - Dataflash_SelectChipFromPage(0); - Dataflash_ToggleSelectedChipCS(); - Dataflash_WaitWhileBusy(); - Dataflash_SendAddressBytes(0, 0); - - /* ============================= - * LEDs Compile Check - * ============================= */ - // cppcheck-suppress redundantAssignment - Dummy = LEDS_LED1 + LEDS_LED2 + LEDS_LED3 + LEDS_LED4; - LEDs_Init(); - LEDs_TurnOnLEDs(LEDS_ALL_LEDS); - LEDs_TurnOffLEDs(LEDS_ALL_LEDS); - LEDs_SetAllLEDs(LEDS_ALL_LEDS); - LEDs_ChangeLEDs(LEDS_ALL_LEDS, LEDS_NO_LEDS); - LEDs_ToggleLEDs(LEDS_ALL_LEDS); - // cppcheck-suppress redundantAssignment - Dummy = LEDs_GetLEDs(); - LEDs_Disable(); - - /* ============================= - * Joystick Compile Check - * ============================= */ - // cppcheck-suppress redundantAssignment - Dummy = JOY_LEFT + JOY_RIGHT + JOY_UP + JOY_DOWN + JOY_PRESS; - Joystick_Init(); - // cppcheck-suppress redundantAssignment - Dummy = Joystick_GetStatus(); - Joystick_Disable(); - - (void)Dummy; -} - - diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile deleted file mode 100644 index cfd9da798..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile +++ /dev/null @@ -1,68 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Makefile for the board driver build test. This -# test attempts to build a dummy project with all -# possible board targets using their respective -# compiler. - -# Path to the LUFA library core -LUFA_PATH := ../../LUFA/ - -# Build test cannot be run with multiple parallel jobs -.NOTPARALLEL: - -all: begin makeboardlist testboards clean end - -begin: - @echo Executing build test "BoardDriverTest". - @echo - -end: - @echo Build test "BoardDriverTest" complete. - @echo - -makeboardlist: - @grep "BOARD_" $(patsubst %/,%,$(LUFA_PATH))/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt - -testboards: - @echo "buildtest:" > BuildMakefile - - @while read line; \ - do \ - build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \ - \ - build_board=$$line; \ - build_arch=`echo $$build_cfg | cut -d':' -f1`; \ - build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ - \ - if ( test -z "$$build_cfg" ); then \ - echo "No matching information set for board $$build_board"; \ - else \ - echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \ - \ - printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \ - printf "\t$(MAKE) -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \ - fi; \ - done < BoardList.txt - - $(MAKE) -f BuildMakefile buildtest - -clean: - rm -f BuildMakefile - rm -f BoardList.txt - $(MAKE) -f makefile.test clean BOARD=NONE ARCH=AVR8 MCU=at90usb1287 - $(MAKE) -f makefile.test clean BOARD=NONE ARCH=XMEGA MCU=atxmega128a1u - $(MAKE) -f makefile.test clean BOARD=NONE ARCH=UC3 MCU=uc3a0256 - -%: - -.PHONY: all begin end makeboardlist testboards clean - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile.test b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile.test deleted file mode 100644 index 7391b514a..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BoardDriverTest/makefile.test +++ /dev/null @@ -1,27 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -------------------------------------- -# LUFA Project Makefile. -# -------------------------------------- - -# Run "make help" for target help. - -MCU = -ARCH = -BOARD = -F_CPU = $(F_USB) -F_USB = 8000000 -OPTIMIZATION = 1 -TARGET = Test -SRC = $(TARGET).c -LUFA_PATH = ../../LUFA -CC_FLAGS = -Werror -DEBUG_LEVEL = 0 - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_build.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg deleted file mode 100644 index 9e15c8cf4..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg +++ /dev/null @@ -1,167 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -# ============================================================================= -# Bootloader configuration map script, processed with the "BootloaderTest" -# makefile. This script file defines the targets for each LUFA bootloader, -# which are then built as part of the build test to ensure that there are no -# failures on all standard configurations. To add a new build target for a -# bootloader to this script, use the format: -# -# BOOTLOADER = {ARCH} : {MCU} : {BOARD} : {FLASH SIZE KB} : {BOOT SIZE KB} : {F_USB MHZ} -# -# And re-run the makefile. -# ============================================================================= -# -# -# ------------ CDC Bootloader -------------------- -CDC = AVR8 : at90usb1287 : XPLAIN : 128 : 8 : 8 : -CDC = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -CDC = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -CDC = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -CDC = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : -CDC = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : -CDC = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : -CDC = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : -CDC = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : -CDC = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : -CDC = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : -CDC = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : -CDC = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : -CDC = AVR8 : at90usb82 : NONE : 8 : 4 : 8 : -CDC = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : -CDC = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : -CDC = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : -CDC = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : -CDC = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : -CDC = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : -CDC = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : -CDC = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : -CDC = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : -CDC = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : -CDC = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : -CDC = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : -CDC = AVR8 : at90usb82 : NONE : 8 : 4 : 16 : -# -# ------------ DFU Bootloader -------------------- -DFU = AVR8 : at90usb1287 : XPLAIN : 128 : 8 : 8 : -DFU = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -DFU = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -DFU = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -DFU = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : -DFU = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : -DFU = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : -DFU = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : -DFU = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : -DFU = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : -DFU = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : -DFU = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : -DFU = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : -DFU = AVR8 : at90usb82 : NONE : 8 : 4 : 8 : -DFU = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : -DFU = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : -DFU = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : -DFU = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : -DFU = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : -DFU = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : -DFU = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : -DFU = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : -DFU = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : -DFU = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : -DFU = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : -DFU = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : -DFU = AVR8 : at90usb82 : NONE : 8 : 4 : 16 : -# -# ------------ HID Bootloader -------------------- -HID = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -HID = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -HID = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -HID = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : -HID = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : -HID = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : -HID = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : -HID = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : -HID = AVR8 : atmega32u2 : NONE : 32 : 2 : 8 : -HID = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : -HID = AVR8 : atmega16u2 : NONE : 16 : 2 : 8 : -HID = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : -HID = AVR8 : atmega8u2 : NONE : 8 : 2 : 8 : -HID = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : -HID = AVR8 : at90usb162 : NONE : 16 : 2 : 8 : -HID = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : -HID = AVR8 : at90usb162 : NONE : 16 : 2 : 8 : -HID = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : -HID = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -HID = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -HID = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -HID = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : -HID = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : -HID = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : -HID = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : -HID = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : -HID = AVR8 : atmega32u2 : NONE : 32 : 2 : 16 : -HID = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : -HID = AVR8 : atmega16u2 : NONE : 16 : 2 : 16 : -HID = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : -HID = AVR8 : atmega8u2 : NONE : 8 : 2 : 16 : -HID = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : -HID = AVR8 : at90usb162 : NONE : 16 : 2 : 16 : -HID = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : -HID = AVR8 : at90usb162 : NONE : 16 : 2 : 16 : -HID = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : -# -# ---------- Printer Bootloader ------------------ -Printer = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -Printer = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -Printer = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -Printer = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : -Printer = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : -Printer = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : -Printer = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : -Printer = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : -Printer = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : -Printer = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : -Printer = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : -Printer = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : -Printer = AVR8 : at90usb82 : NONE : 8 : 4 : 8 : -Printer = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : -Printer = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : -Printer = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : -Printer = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : -Printer = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : -Printer = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : -Printer = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : -Printer = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : -Printer = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : -Printer = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : -Printer = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : -Printer = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : -Printer = AVR8 : at90usb82 : NONE : 8 : 4 : 16 : -# -# ---------- Mass Storage Bootloader ----------------- -MassStorage = AVR8 : at90usb1287 : XPLAIN : 128 : 8 : 8 : -MassStorage = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : -MassStorage = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : -MassStorage = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : -MassStorage = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : -MassStorage = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : -MassStorage = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : -MassStorage = AVR8 : atmega32u4 : LEONARDO : 32 : 4 : 16 : -MassStorage = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : -MassStorage = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : -MassStorage = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : -MassStorage = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : -MassStorage = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : -MassStorage = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : -MassStorage = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : -MassStorage = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : -MassStorage = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : -MassStorage = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : -MassStorage = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : -MassStorage = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : -# diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/makefile deleted file mode 100644 index 52ebb9cdb..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/BootloaderTest/makefile +++ /dev/null @@ -1,64 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Makefile for the bootloader build test. This -# test attempts to build all the bootloaders -# with all supported device configurations. - -# Path to the LUFA library core -LUFA_PATH := ../../LUFA/ - -# Build test cannot be run with multiple parallel jobs -.NOTPARALLEL: - -all: begin testbootloaders clean end - -begin: - @echo Executing build test "BootloaderTest". - @echo - -end: - @echo Build test "BootloaderTest" complete. - @echo - -testbootloaders: - @echo "buildtest:" > BuildMakefile - - @while read line; \ - do \ - build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \ - \ - if ( test -n "$$build_cfg" ); then \ - build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \ - build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \ - \ - build_arch=`echo $$build_cfg | cut -d':' -f1`; \ - build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ - build_board=`echo $$build_cfg | cut -d':' -f3`; \ - build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \ - build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \ - build_fusb=`echo $$build_cfg | cut -d':' -f6`; \ - \ - printf "Found '%s' bootloader configuration (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s | BOARD: %s | F_USB: %sMHz)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch $$build_board $$build_fusb; \ - \ - printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB, BOARD: %s, F_USB: %sMHz\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize $$build_board $$build_fusb >> BuildMakefile; \ - printf "\t$(MAKE) -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s F_USB=%s000000 DEBUG_LEVEL=0\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize $$build_fusb >> BuildMakefile; \ - fi; \ - done < BootloaderDeviceMap.cfg - - $(MAKE) -f BuildMakefile buildtest - -clean: - rm -f BuildMakefile - -%: - -.PHONY: all begin end testbootloaders clean - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Dummy.S b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Dummy.S deleted file mode 100644 index dcfe98186..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Dummy.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -.section .text - - -# Mandatory entry point for successful compilation and link -.global main -main: - - -# Mandatory callback needed for base compile of the USB driver -.global CALLBACK_USB_GetDescriptor -CALLBACK_USB_GetDescriptor: diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Modules.h b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Modules.h deleted file mode 100644 index cc16fd6b9..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Modules.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include <LUFA/Common/Common.h> - -#include <LUFA/Platform/Platform.h> - -#include <LUFA/Drivers/USB/USB.h> -#include <LUFA/Drivers/Misc/RingBuffer.h> -#include <LUFA/Drivers/Misc/TerminalCodes.h> - -#if (ARCH == ARCH_AVR8) - #if defined(ADC) - #include <LUFA/Drivers/Peripheral/ADC.h> - #endif - - #include <LUFA/Drivers/Peripheral/Serial.h> - #include <LUFA/Drivers/Peripheral/SerialSPI.h> - #include <LUFA/Drivers/Peripheral/SPI.h> - - #if defined(TWCR) - #include <LUFA/Drivers/Peripheral/TWI.h> - #endif -#elif (ARCH == ARCH_XMEGA) - #include <LUFA/Drivers/Peripheral/Serial.h> - #include <LUFA/Drivers/Peripheral/SerialSPI.h> - #include <LUFA/Drivers/Peripheral/SPI.h> - #include <LUFA/Drivers/Peripheral/TWI.h> -#endif diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_C.c b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_C.c deleted file mode 100644 index 349ac6eec..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_C.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "Modules.h" diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_CPP.cpp b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_CPP.cpp deleted file mode 100644 index 349ac6eec..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/Test_CPP.cpp +++ /dev/null @@ -1,31 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "Modules.h" diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile deleted file mode 100644 index 2cd33cf87..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile +++ /dev/null @@ -1,66 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Makefile for the module build test. This test -# attempts to build as many modules as possible -# under all supported architectures, and include -# all module headers in a simple C and C++ -# application. - -# Path to the LUFA library core -LUFA_PATH := ../../LUFA/ - -# Build test cannot be run with multiple parallel jobs -.NOTPARALLEL: - -# List of device families per architecture, one device per architecture sub-family -AVR8_FAMILIES := at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162 -XMEGA_FAMILIES := atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4 -UC3_FAMILIES := uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256 - -# List of all device families, with a family postfix -DEVICE_FAMILIES := $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FAMILIES:%=%.uc3) - - -all: begin $(DEVICE_FAMILIES) clean end - -arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end -arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end -arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end - -begin: - @echo Executing build test "ModuleTest". - @echo - -end: - @echo Build test "ModuleTest" complete. - @echo - -%.avr8: - @echo Building ModuleTest for ARCH=AVR8 MCU=$(@:%.avr8=%)... - $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%) - -%.xmega: - @echo Building ModuleTest for ARCH=XMEGA MCU=$(@:%.xmega=%)... - $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%) - -%.uc3: - @echo Building ModuleTest for ARCH=UC3 MCU=$(@:%.uc3=%)... - $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%) - -clean: - $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES)) - $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES)) - $(MAKE) -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES)) - -%: - -.PHONY: all arch_avr8 arch_xmega arch_uc3 begin end - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile.test b/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile.test deleted file mode 100644 index 1307d5e37..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/ModuleTest/makefile.test +++ /dev/null @@ -1,88 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -------------------------------------- -# LUFA Project Makefile. -# -------------------------------------- - -# Run "make help" for target help. - -MCU = -ARCH = -BOARD = NONE -F_CPU = $(F_USB) -OPTIMIZATION = 1 -TARGET = Test -SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB) -LUFA_PATH = ../../LUFA -DEBUG_LEVEL = 0 - -ifeq ($(ARCH), AVR8) - F_USB = 8000000 -else ifeq ($(ARCH), XMEGA) - F_USB = 48000000 -else ifeq ($(ARCH), UC3) - F_USB = 48000000 -endif - -# Generic C/C++ compiler flags -CC_FLAGS = -Wextra -CC_FLAGS += -Werror -CC_FLAGS += -Wformat=2 -CC_FLAGS += -Winit-self -CC_FLAGS += -Wswitch-enum -CC_FLAGS += -Wunused -CC_FLAGS += -Wundef -CC_FLAGS += -Wpointer-arith -CC_FLAGS += -Wcast-align -CC_FLAGS += -Wwrite-strings -CC_FLAGS += -Wlogical-op -CC_FLAGS += -Wmissing-declarations -CC_FLAGS += -Wmissing-field-initializers -CC_FLAGS += -Wmissing-format-attribute -CC_FLAGS += -Woverlength-strings -CC_FLAGS += -Wswitch-default -CC_FLAGS += -Wfloat-equal -CC_FLAGS += -Waggregate-return -CC_FLAGS += -Wmissing-include-dirs - -# Disable warnings not supported by the version of GCC used for UC3 targets (FIXME) -ifneq ($(ARCH), UC3) - CC_FLAGS += -Wdouble-promotion -endif - -# Only enable redundant declaration warnings for AVR8 target (FIXME) -ifeq ($(ARCH), AVR8) - CC_FLAGS += -Wredundant-decls -endif - -# C compiler only flags -C_FLAGS += -Wmissing-parameter-type -C_FLAGS += -Wmissing-prototypes -C_FLAGS += -Wnested-externs -C_FLAGS += -Wbad-function-cast -C_FLAGS += -Wstrict-prototypes -C_FLAGS += -Wold-style-definition - -# Disable warnings not supported by the version of GCC used for UC3 targets (FIXME) -ifneq ($(ARCH), UC3) - C_FLAGS += -Wunsuffixed-float-constants - C_FLAGS += -Wjump-misses-init -endif - -# Only check C++ compatibility on the build files, to ensure headers are C++ compatible -Test_C.c Test_CPP.c: CC_FLAGS += -Wc++-compat - -# Potential additional warnings to enable in the future (FIXME) -#CC_FLAGS += -Wcast-qual -#CC_FLAGS += -Wconversion -#CC_FLAGS += -Wsign-conversion -#CC_FLAGS += -pedantic - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_sources.mk -include $(LUFA_PATH)/Build/lufa_build.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Dummy.S b/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Dummy.S deleted file mode 100644 index b5655add5..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Dummy.S +++ /dev/null @@ -1,42 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -.section .text - - -# Mandatory entry point for successful compilation and link -.global main -main: - # Force code generation of the base USB stack - call USB_Init - -# Mandatory callback needed for base compile of the USB driver -.global CALLBACK_USB_GetDescriptor -CALLBACK_USB_GetDescriptor: diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Test.c b/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Test.c deleted file mode 100644 index 7a83794df..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/Test.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include <LUFA/Common/Common.h> -#include <LUFA/Drivers/USB/USB.h> diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile deleted file mode 100644 index cd88754db..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Makefile for the single USB mode build test. -# This test attempts to build the USB module -# under fixed device and fixed host modes under -# all supported architectures - -# Path to the LUFA library core -LUFA_PATH := ../../LUFA/ - -# Build test cannot be run with multiple parallel jobs -.NOTPARALLEL: - -all: begin compile clean end - -begin: - @echo Executing build test "SingleUSBModeTest". - @echo - -end: - @echo Build test "SingleUSBModeTest" complete. - @echo - -compile: - @echo Building SingleUSBModeTest for ARCH=AVR8 in device only mode... - $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY' - - @echo Building SingleUSBModeTest for ARCH=AVR8 in host only mode... - $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY' - - @echo Building SingleUSBModeTest for ARCH=XMEGA in device only mode... - $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY' - - @echo Building SingleUSBModeTest for ARCH=UC3 in device only mode... - $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY' - - @echo Building SingleUSBModeTest for ARCH=UC3 in host only mode... - $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY' - -clean: - $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=at90usb1287 - $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u - $(MAKE) -f makefile.test clean ARCH=UC3 MCU=uc3a0256 - -%: - -.PHONY: begin end compile clean - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile.test b/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile.test deleted file mode 100644 index 242e530ea..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/SingleUSBModeTest/makefile.test +++ /dev/null @@ -1,69 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -------------------------------------- -# LUFA Project Makefile. -# -------------------------------------- - -# Run "make help" for target help. - -MCU = -ARCH = -BOARD = NONE -F_CPU = $(F_USB) -DEBUG_LEVEL = 0 - -ifeq ($(ARCH), AVR8) - F_USB = 8000000 -else ifeq ($(ARCH), XMEGA) - F_USB = 48000000 -else ifeq ($(ARCH), UC3) - F_USB = 48000000 -endif - -OPTIMIZATION = 1 -TARGET = Test -SRC = Test.c Dummy.S $(LUFA_SRC_USB) -LUFA_PATH = ../../LUFA - -# Generic C/C++ compiler flags -CC_FLAGS = -Wextra -CC_FLAGS += -Werror -CC_FLAGS += -Wformat=2 -CC_FLAGS += -Winit-self -CC_FLAGS += -Wswitch-enum -CC_FLAGS += -Wunused -CC_FLAGS += -Wundef -CC_FLAGS += -Wpointer-arith -CC_FLAGS += -Wcast-align -CC_FLAGS += -Wwrite-strings -CC_FLAGS += -Wlogical-op -CC_FLAGS += -Wmissing-declarations -CC_FLAGS += -Wmissing-field-initializers -CC_FLAGS += -Wmissing-format-attribute -CC_FLAGS += -Woverlength-strings - -# Only enable rendundant declaration warnings for AVR8 target (FIXME) -ifeq ($(ARCH), AVR8) - CC_FLAGS += -Wredundant-decls -endif - -# C compiler only flags -C_FLAGS += -Wmissing-parameter-type -C_FLAGS += -Wnested-externs - -# Potential additional warnings to enable in the future (FIXME) -#CC_FLAGS += -Wswitch-default -#CC_FLAGS += -Wc++-compat -#CC_FLAGS += -Wcast-qual -#CC_FLAGS += -Wconversion -#CC_FLAGS += -Wjump-misses-init -#CC_FLAGS += -pedantic - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_sources.mk -include $(LUFA_PATH)/Build/lufa_build.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/StaticAnalysisTest/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/StaticAnalysisTest/makefile deleted file mode 100644 index f5dc1c007..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/StaticAnalysisTest/makefile +++ /dev/null @@ -1,47 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Static anlysis of the entire LUFA source tree, using the free cross-platform "cppcheck" tool. - -# Path to the LUFA library core -LUFA_PATH := ../../LUFA/ - -CPPCHECK_EXCLUDES := FATFs/ \ - PetiteFATFs/ \ - uip/ - -CPPCHECK_INCLUDES := $(patsubst %/,%,$(LUFA_PATH))/CodeTemplates/ \ - $(patsubst %/,%,$(LUFA_PATH))/../Projects/AVRISP-MKII/ - -CPPCHECK_FLAGS := -U TEMPLATE_FUNC_NAME -U __GNUC__ -U __DOXYGEN__ - -CPPCHECK_SUPPRESS := variableScope missingInclude unusedFunction - -SRC := $(patsubst %/,%,$(LUFA_PATH))/.. - -# Build test cannot be run with multiple parallel jobs -.NOTPARALLEL: - -all: begin cppcheck end - -begin: - @echo Executing build test "StaticAnalysisTest". - @echo - -end: - @echo Build test "StaticAnalysisTest" complete. - @echo - -%: - - -.PHONY: all begin end - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa_core.mk -include $(LUFA_PATH)/Build/lufa_cppcheck.mk diff --git a/tmk_core/protocol/lufa/LUFA-git/BuildTests/makefile b/tmk_core/protocol/lufa/LUFA-git/BuildTests/makefile deleted file mode 100644 index 1f09b3fec..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/BuildTests/makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2014. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# - -# Makefile to build all the LUFA Build Tests. Build Tests are -# used to verify the correctness of the LUFA library, and are -# not intended to be modified or compiled by non-developers. - -all: - -%: - @echo Executing \"make $@\" on all LUFA build tests. - @echo - $(MAKE) -C BoardDriverTest $@ - $(MAKE) -C BootloaderTest $@ - $(MAKE) -C ModuleTest $@ - $(MAKE) -C SingleUSBModeTest $@ - $(MAKE) -C StaticAnalysisTest $@ - @echo - @echo LUFA build test \"make $@\" operation complete. |