diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp')
-rw-r--r-- | tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py | 96 |
1 files changed, 0 insertions, 96 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py deleted file mode 100644 index 286577280..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py +++ /dev/null @@ -1,96 +0,0 @@ -""" - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -""" - -""" - LUFA Generic HID device demo host test script. This script will send a - continuous stream of generic reports to the device, to show a variable LED - pattern on the target board. Send and received report data is printed to - the terminal. - - Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/). -""" - -import sys -from time import sleep -import pywinusb.hid as hid - -# Generic HID device VID, PID and report payload length (length is increased -# by one to account for the Report ID byte that must be pre-pended) -device_vid = 0x03EB -device_pid = 0x204F -report_length = 1 + 8 - - -def get_hid_device_handle(): - hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid, - product_id=device_pid) - - valid_hid_devices = hid_device_filter.get_devices() - - if len(valid_hid_devices) is 0: - return None - else: - return valid_hid_devices[0] - - -def send_led_pattern(device, led1, led2, led3, led4): - # Report data for the demo is the report ID (always zero) followed by the - # LED on/off data - report_data = [0, led1, led2, led3, led4] - - # Zero-extend the array to the length the report should be - report_data.extend([0] * (report_length - len(report_data))) - - # Send the generated report to the device - device.send_output_report(report_data) - - print("Sent LED Pattern: {0}".format(report_data[1:5])) - - -def received_led_pattern(report_data): - print("Received LED Pattern: {0}".format(report_data[1:5])) - - -def main(): - hid_device = get_hid_device_handle() - - if hid_device is None: - print("No valid HID device found.") - sys.exit(1) - - try: - hid_device.open() - - print("Connected to device 0x%04X/0x%04X - %s [%s]" % - (hid_device.vendor_id, hid_device.product_id, - hid_device.product_name, hid_device.vendor_name)) - - # Set up the HID input report handler to receive reports - hid_device.set_raw_data_handler(received_led_pattern) - - p = 0 - while (hid_device.is_plugged()): - # Convert the current pattern index to a bit-mask and send - send_led_pattern(hid_device, - (p >> 3) & 1, - (p >> 2) & 1, - (p >> 1) & 1, - (p >> 0) & 1) - - # Compute next LED pattern in sequence - p = (p + 1) % 16 - - # Delay a bit for visual effect - sleep(.2) - - finally: - hid_device.close() - - -if __name__ == '__main__': - main() |