diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/LUFA/Common')
7 files changed, 0 insertions, 1656 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h deleted file mode 100644 index 292e27b37..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Architecture specific definitions relating to specific processor architectures. - * - * \copydetails Group_ArchitectureSpecific - * - * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's - * functionality. - */ - -/** \ingroup Group_Common - * \defgroup Group_ArchitectureSpecific Architecture Specific Definitions - * \brief Architecture specific definitions relating to specific processor architectures. - * - * Architecture specific macros, functions and other definitions, which relate to specific architectures. This - * definitions may or may not be available in some form on other architectures, and thus should be protected by - * preprocessor checks in portable code to prevent compile errors. - * - * @{ - */ - -#ifndef __LUFA_ARCHSPEC_H__ -#define __LUFA_ARCHSPEC_H__ - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__) - #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) - /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging - * interface after is has been disabled in software via \ref JTAG_DISABLE(). - * - * \note This macro is not available for all architectures. - */ - #define JTAG_ENABLE() do { \ - __asm__ __volatile__ ( \ - "in __tmp_reg__,__SREG__" "\n\t" \ - "cli" "\n\t" \ - "out %1, %0" "\n\t" \ - "out __SREG__, __tmp_reg__" "\n\t" \ - "out %1, %0" "\n\t" \ - : \ - : "r" (MCUCR & ~(1 << JTD)), \ - "M" (_SFR_IO_ADDR(MCUCR)) \ - : "r0"); \ - } while (0) - - /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG - * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO - * mode. - * - * \note This macro is not available for all architectures. - */ - #define JTAG_DISABLE() do { \ - __asm__ __volatile__ ( \ - "in __tmp_reg__,__SREG__" "\n\t" \ - "cli" "\n\t" \ - "out %1, %0" "\n\t" \ - "out __SREG__, __tmp_reg__" "\n\t" \ - "out %1, %0" "\n\t" \ - : \ - : "r" (MCUCR | (1 << JTD)), \ - "M" (_SFR_IO_ADDR(MCUCR)) \ - : "r0"); \ - } while (0) - #endif - - /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always - * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer - * removes/reorders code to the point where break points cannot reliably be set. - * - * \note This macro is not available for all architectures. - */ - #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) - - /** Defines an explicit JTAG break point in the resulting binary via the assembly \c BREAK statement. When - * a JTAG is used, this causes the program execution to halt when reached until manually resumed. - * - * \note This macro is not available for all architectures. - */ - #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("break" ::) - - /** Macro for testing condition "x" and breaking via \ref JTAG_DEBUG_BREAK() if the condition is false. - * - * \note This macro is not available for all architectures. - * - * \param[in] Condition Condition that will be evaluated. - */ - #define JTAG_ASSERT(Condition) do { \ - if (!(Condition)) \ - JTAG_DEBUG_BREAK(); \ - } while (0) - - /** Macro for testing condition \c "x" and writing debug data to the stdout stream if \c false. The stdout stream - * must be pre-initialized before this macro is run and linked to an output device, such as the microcontroller's - * USART peripheral. - * - * The output takes the form "{FILENAME}: Function {FUNCTION NAME}, Line {LINE NUMBER}: Assertion {Condition} failed." - * - * \note This macro is not available for all architectures. - * - * \param[in] Condition Condition that will be evaluated, - */ - #define STDOUT_ASSERT(Condition) do { \ - if (!(Condition)) \ - printf_P(PSTR("%s: Function \"%s\", Line %d: " \ - "Assertion \"%s\" failed.\r\n"), \ - __FILE__, __func__, __LINE__, #Condition); \ - } while (0) - - #if !defined(pgm_read_ptr) || defined(__DOXYGEN__) - /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is a wrapper for the avr-libc - * \c pgm_read_word() macro with a \c void* cast, so that its value can be assigned directly to a - * pointer variable or used in pointer arithmetic without further casting in C. - * - * \note This macro is not available for all architectures. - * - * \param[in] Address Address of the pointer to read. - * - * \return Pointer retrieved from PROGMEM space. - */ - #define pgm_read_ptr(Address) (void*)pgm_read_word(Address) - #endif - #elif (ARCH == ARCH_UC3) - #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) - #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::) - #define JTAG_ASSERT(Condition) do { \ - if (!(Condition)) \ - JTAG_DEBUG_BREAK(); \ - } while (0) - #define STDOUT_ASSERT(Condition) do { \ - if (!(Condition)) \ - printf("%s: Function \"%s\", Line %d: " \ - "Assertion \"%s\" failed.\r\n", \ - __FILE__, __func__, __LINE__, #Condition); \ - } while (0) - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h deleted file mode 100644 index 265b41244..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Supported library architecture defines. - * - * \copydetails Group_Architectures - * - * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's - * functionality. - */ - -/** \ingroup Group_Common - * \defgroup Group_Architectures Hardware Architectures - * \brief Supported library architecture defines. - * - * Architecture macros for selecting the desired target microcontroller architecture. One of these values should be - * defined as the value of \c ARCH in the user project makefile via the \c -D compiler switch to GCC, to select the - * target architecture. - * - * The selected architecture should remain consistent with the makefile \c ARCH value, which is used to select the - * underlying driver source files for each architecture. - * - * @{ - */ - -#ifndef __LUFA_ARCHITECTURES_H__ -#define __LUFA_ARCHITECTURES_H__ - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Selects the Atmel 8-bit AVR (AT90USB* and ATMEGA*U* chips) architecture. */ - #define ARCH_AVR8 0 - - /** Selects the Atmel 32-bit UC3 AVR (AT32UC3* chips) architecture. */ - #define ARCH_UC3 1 - - /** Selects the Atmel XMEGA AVR (ATXMEGA* chips) architecture. */ - #define ARCH_XMEGA 2 - - #if !defined(__DOXYGEN__) - #define ARCH_ ARCH_AVR8 - - #if !defined(ARCH) - #define ARCH ARCH_AVR8 - #endif - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h deleted file mode 100644 index dc5c6be4c..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Special function/variable attribute macros. - * - * \copydetails Group_FuncVarAttributes - * - * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's - * functionality. - */ - -/** \ingroup Group_Common - * \defgroup Group_FuncVarAttributes Function/Variable Attributes - * \brief Special function/variable attribute macros. - * - * This module contains macros for applying specific attributes to functions and variables to control various - * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype - * or variable declaration in any order, and multiple attributes can be specified for a single item via a space - * separated list. - * - * On incompatible versions of GCC or on other compilers, these macros evaluate to nothing unless they are - * critical to the code's function and thus must throw a compile error when used. - * - * @{ - */ - -#ifndef __LUFA_ATTR_H__ -#define __LUFA_ATTR_H__ - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if (__GNUC__ >= 3) || defined(__DOXYGEN__) - /** Indicates to the compiler that the function can not ever return, so that any stack restoring or - * return code may be omitted by the compiler in the resulting binary. - */ - #define ATTR_NO_RETURN __attribute__ ((noreturn)) - - /** Indicates that the function returns a value which should not be ignored by the user code. When - * applied, any ignored return value from calling the function will produce a compiler warning. - */ - #define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result)) - - /** Indicates that the specified parameters of the function are pointers which should never be \c NULL. - * When applied as a 1-based comma separated list the compiler will emit a warning if the specified - * parameters are known at compiler time to be \c NULL at the point of calling the function. - */ - #define ATTR_NON_NULL_PTR_ARG(...) __attribute__ ((nonnull (__VA_ARGS__))) - - /** Removes any preamble or postamble from the function. When used, the function will not have any - * register or stack saving code. This should be used with caution, and when used the programmer - * is responsible for maintaining stack and register integrity. - */ - #define ATTR_NAKED __attribute__ ((naked)) - - /** Prevents the compiler from considering a specified function for in-lining. When applied, the given - * function will not be in-lined under any circumstances. - */ - #define ATTR_NO_INLINE __attribute__ ((noinline)) - - /** Forces the compiler to inline the specified function. When applied, the given function will be - * in-lined under all circumstances. - */ - #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) - - /** Indicates that the specified function is pure, in that it has no side-effects other than global - * or parameter variable access. - */ - #define ATTR_PURE __attribute__ ((pure)) - - /** Indicates that the specified function is constant, in that it has no side effects other than - * parameter access. - */ - #define ATTR_CONST __attribute__ ((const)) - - /** Marks a given function as deprecated, which produces a warning if the function is called. */ - #define ATTR_DEPRECATED __attribute__ ((deprecated)) - - /** Marks a function as a weak reference, which can be overridden by other functions with an - * identical name (in which case the weak reference is discarded at link time). - */ - #define ATTR_WEAK __attribute__ ((weak)) - #endif - - /** Forces the compiler to not automatically zero the given global variable on startup, so that the - * current RAM contents is retained. Under most conditions this value will be random due to the - * behavior of volatile memory once power is removed, but may be used in some specific circumstances, - * like the passing of values back after a system watchdog reset. - */ - #define ATTR_NO_INIT __attribute__ ((section (".noinit"))) - - /** Places the function in one of the initialization sections, which execute before the main function - * of the application. Refer to the avr-libc manual for more information on the initialization sections. - * - * \param[in] SectionIndex Initialization section number where the function should be placed. - */ - #define ATTR_INIT_SECTION(SectionIndex) __attribute__ ((used, naked, section (".init" #SectionIndex ))) - - /** Marks a function as an alias for another function. - * - * \param[in] Func Name of the function which the given function name should alias. - */ - #define ATTR_ALIAS(Func) __attribute__ ((alias( #Func ))) - - /** Marks a variable or struct element for packing into the smallest space available, omitting any - * alignment bytes usually added between fields to optimize field accesses. - */ - #define ATTR_PACKED __attribute__ ((packed)) - - /** Indicates the minimum alignment in bytes for a variable or struct element. - * - * \param[in] Bytes Minimum number of bytes the item should be aligned to. - */ - #define ATTR_ALIGNED(Bytes) __attribute__ ((aligned(Bytes))) -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h deleted file mode 100644 index 06ff4ddb4..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Supported pre-made board hardware defines. - * - * \copydetails Group_BoardTypes - * - * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's - * functionality. - */ - -/** \ingroup Group_Common - * \defgroup Group_BoardTypes Board Types - * \brief Supported pre-made board hardware defines. - * - * Board macros for indicating the chosen physical board hardware to the library. These macros should be used when - * defining the \c BOARD token to the chosen hardware via the \c -D switch in the project makefile. If a custom - * board is used, the \ref BOARD_NONE or \ref BOARD_USER values should be selected. - * - * @{ - */ - -#ifndef __LUFA_BOARDTYPES_H__ -#define __LUFA_BOARDTYPES_H__ - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Selects the user-defined board drivers, which should be placed in the user project's folder - * under a directory named \c /Board/. Each board driver should be named identically to the LUFA - * master board driver (i.e., driver in the \c LUFA/Drivers/Board directory) so that the library - * can correctly identify it. - */ - #define BOARD_USER 0 - - /** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers - * such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */ - #define BOARD_NONE 1 - - /** Selects the USBKEY specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ - #define BOARD_USBKEY 2 - - /** Selects the STK525 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ - #define BOARD_STK525 3 - - /** Selects the STK526 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ - #define BOARD_STK526 4 - - /** Selects the RZUSBSTICK specific board drivers, including the driver for the boards LEDs. */ - #define BOARD_RZUSBSTICK 5 - - /** Selects the ATAVRUSBRF01 specific board drivers, including the driver for the board LEDs. */ - #define BOARD_ATAVRUSBRF01 6 - - /** Selects the BUMBLEB specific board drivers, using the officially recommended peripheral layout. */ - #define BOARD_BUMBLEB 7 - - /** Selects the XPLAIN (Revision 2 or newer) specific board drivers, including LED and Dataflash drivers. */ - #define BOARD_XPLAIN 8 - - /** Selects the XPLAIN (Revision 1) specific board drivers, including LED and Dataflash drivers. */ - #define BOARD_XPLAIN_REV1 9 - - /** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ - #define BOARD_EVK527 10 - - /** Selects the Teensy version 1.x specific board drivers, including the driver for the board LEDs. */ - #define BOARD_TEENSY 11 - - /** Selects the USBTINY MKII specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_USBTINYMKII 12 - - /** Selects the Benito specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_BENITO 13 - - /** Selects the JM-DB-U2 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_JMDBU2 14 - - /** Selects the Olimex AVR-USB-162 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_OLIMEX162 15 - - /** Selects the UDIP specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_UDIP 16 - - /** Selects the BUI specific board drivers, including the driver for the board LEDs. */ - #define BOARD_BUI 17 - - /** Selects the Arduino Uno specific board drivers, including the driver for the board LEDs. */ - #define BOARD_UNO 18 - - /** Selects the Busware CUL V3 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_CULV3 19 - - /** Selects the Blackcat USB JTAG specific board drivers, including the driver for the board LEDs. */ - #define BOARD_BLACKCAT 20 - - /** Selects the Maximus specific board drivers, including the driver for the board LEDs. */ - #define BOARD_MAXIMUS 21 - - /** Selects the Minimus specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_MINIMUS 22 - - /** Selects the Adafruit U4 specific board drivers, including the Button driver. */ - #define BOARD_ADAFRUITU4 23 - - /** Selects the Microsin AVR-USB162 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_MICROSIN162 24 - - /** Selects the Kernel Concepts USBFOO specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_USBFOO 25 - - /** Selects the Sparkfun ATMEGA8U2 specific board drivers, including the driver for the board LEDs. */ - #define BOARD_SPARKFUN8U2 26 - - /** Selects the Atmel EVK1101 specific board drivers, including the Button, Joystick and LED drivers. */ - #define BOARD_EVK1101 27 - - /** Selects the Busware TUL specific board drivers, including the Button and LED drivers. */ - #define BOARD_TUL 28 - - /** Selects the Atmel EVK1100 specific board drivers, including the Button, Joystick and LED drivers. */ - #define BOARD_EVK1100 29 - - /** Selects the Atmel EVK1104 specific board drivers, including the Button and LED drivers. */ - #define BOARD_EVK1104 30 - - /** Selects the Atmel XMEGA A3BU Xplained specific board drivers, including Dataflash, Button and LED drivers. */ - #define BOARD_A3BU_XPLAINED 31 - - /** Selects the Teensy version 2.x specific board drivers, including the driver for the board LEDs. */ - #define BOARD_TEENSY2 32 - - /** Selects the USB2AX version 1 and 2 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_USB2AX 33 - - /** Selects the USB2AX version 3 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_USB2AX_V3 34 - - /** Selects the Micropendous 32U2 specific board drivers, including the Button and LED drivers. */ - #define BOARD_MICROPENDOUS_32U2 35 - - /** Selects the Micropendous A specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_A 36 - - /** Selects the Micropendous 1 specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_1 37 - - /** Selects the Micropendous 2 specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_2 38 - - /** Selects the Micropendous 3 specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_3 39 - - /** Selects the Micropendous 4 specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_4 40 - - /** Selects the Micropendous DIP specific board drivers, including the driver for the board Button. */ - #define BOARD_MICROPENDOUS_DIP 41 - - /** Selects the Micropendous (Arduino-like) revision 1 specific board drivers, including the Button and LED drivers. */ - #define BOARD_MICROPENDOUS_REV1 42 - - /** Selects the Micropendous (Arduino-like) revision 2 specific board drivers, including the Button and LED drivers. */ - #define BOARD_MICROPENDOUS_REV2 43 - - /** Selects the XMEGA B1 Xplained specific board drivers, including the Button and LED drivers. */ - #define BOARD_B1_XPLAINED 44 - - /** Selects the Bitwizard Multio specific board drivers, including the driver for the board LEDs. */ - #define BOARD_MULTIO 45 - - /** Selects the Bitwizard Big-Multio specific board drivers, including the driver for the board LEDs. */ - #define BOARD_BIGMULTIO 46 - - /** Selects the DorkbotPDX Duce specific board drivers, including the driver for the board LEDs. */ - #define BOARD_DUCE 47 - - /** Selects the Olimex AVR-USB-32U4 specific board drivers, including the Button and LED drivers. */ - #define BOARD_OLIMEX32U4 48 - - /** Selects the Olimex AVR-USB-T32U4 specific board drivers, including the Button and LED drivers. */ - #define BOARD_OLIMEXT32U4 49 - - /** Selects the Olimex AVR-ISP-MK2 specific board drivers, including the Button and LED drivers. */ - #define BOARD_OLIMEXISPMK2 50 - - /** Selects the Arduino Leonardo specific board drivers, including the driver for the board LEDs. */ - #define BOARD_LEONARDO 51 - - /** Selects the UC3-A3 Xplained specific board drivers, including the Button and LED drivers. */ - #define BOARD_UC3A3_XPLAINED 52 - - /** Selects the USB2AX version 3.1 specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_USB2AX_V31 53 - - /** Selects the Stange-ISP specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_STANGE_ISP 54 - - /** Selects the XMEGA C3 XPLAINED specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_C3_XPLAINED 55 - - /** Selects the U2S specific board drivers, including the Button and LEDs drivers. */ - #define BOARD_U2S 56 - - /** Selects the Arduino YUN specific board drivers, including the driver for the board LEDs. */ - #define BOARD_YUN 57 - - /** Selects the Arduino Micro specific board drivers, including the driver for the board LEDs. */ - #define BOARD_MICRO 58 - - #if !defined(__DOXYGEN__) - #define BOARD_ BOARD_NONE - - #if !defined(BOARD) - #define BOARD BOARD_NONE - #endif - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Common.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Common.h deleted file mode 100644 index 3e12e4f33..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Common.h +++ /dev/null @@ -1,393 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \dir - * \brief Common library header files. - * - * This folder contains header files which are common to all parts of the LUFA library. They may be used freely in - * user applications. - */ - -/** \file - * \brief Common library convenience headers, macros and functions. - * - * \copydetails Group_Common - */ - -/** \defgroup Group_Common Common Utility Headers - LUFA/Drivers/Common/Common.h - * \brief Common library convenience headers, macros and functions. - * - * Common utility headers containing macros, functions, enums and types which are common to all - * aspects of the library. - * - * @{ - */ - -/** \defgroup Group_GlobalInt Global Interrupt Macros - * \brief Convenience macros for the management of interrupts globally within the device. - * - * Macros and functions to create and control global interrupts within the device. - */ - -#ifndef __LUFA_COMMON_H__ -#define __LUFA_COMMON_H__ - - /* Macros: */ - #define __INCLUDE_FROM_COMMON_H - - /* Includes: */ - #include <stdint.h> - #include <stdbool.h> - #include <string.h> - #include <stddef.h> - - #include "Architectures.h" - #include "BoardTypes.h" - #include "ArchitectureSpecific.h" - #include "CompilerSpecific.h" - #include "Attributes.h" - - #if defined(USE_LUFA_CONFIG_HEADER) - #include "LUFAConfig.h" - #endif - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Architecture specific utility includes: */ - #if defined(__DOXYGEN__) - /** Type define for an unsigned integer the same width as the selected architecture's machine register. - * This is distinct from the non-specific standard int data type, whose width is machine dependant but - * which may not reflect the actual machine register width on some targets (e.g. AVR8). - */ - typedef MACHINE_REG_t uint_reg_t; - #elif (ARCH == ARCH_AVR8) - #include <avr/io.h> - #include <avr/interrupt.h> - #include <avr/pgmspace.h> - #include <avr/eeprom.h> - #include <avr/boot.h> - #include <math.h> - #include <util/delay.h> - - typedef uint8_t uint_reg_t; - - #define ARCH_HAS_EEPROM_ADDRESS_SPACE - #define ARCH_HAS_FLASH_ADDRESS_SPACE - #define ARCH_HAS_MULTI_ADDRESS_SPACE - #define ARCH_LITTLE_ENDIAN - - #include "Endianness.h" - #elif (ARCH == ARCH_UC3) - #include <avr32/io.h> - #include <math.h> - - // === TODO: Find abstracted way to handle these === - #define PROGMEM - #define pgm_read_byte(x) *x - #define memcmp_P(...) memcmp(__VA_ARGS__) - #define memcpy_P(...) memcpy(__VA_ARGS__) - // ================================================= - - typedef uint32_t uint_reg_t; - - #define ARCH_BIG_ENDIAN - - #include "Endianness.h" - #elif (ARCH == ARCH_XMEGA) - #include <avr/io.h> - #include <avr/interrupt.h> - #include <avr/pgmspace.h> - #include <avr/eeprom.h> - #include <math.h> - #include <util/delay.h> - - typedef uint8_t uint_reg_t; - - #define ARCH_HAS_EEPROM_ADDRESS_SPACE - #define ARCH_HAS_FLASH_ADDRESS_SPACE - #define ARCH_HAS_MULTI_ADDRESS_SPACE - #define ARCH_LITTLE_ENDIAN - - #include "Endianness.h" - #else - #error Unknown device architecture specified. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if !defined(__DOXYGEN__) - // Obsolete, retained for compatibility with user code - #define MACROS do - #define MACROE while (0) - #endif - - /** Convenience macro to determine the larger of two values. - * - * \attention This macro should only be used with operands that do not have side effects from being evaluated - * multiple times. - * - * \param[in] x First value to compare - * \param[in] y First value to compare - * - * \return The larger of the two input parameters - */ - #if !defined(MAX) || defined(__DOXYGEN__) - #define MAX(x, y) (((x) > (y)) ? (x) : (y)) - #endif - - /** Convenience macro to determine the smaller of two values. - * - * \attention This macro should only be used with operands that do not have side effects from being evaluated - * multiple times. - * - * \param[in] x First value to compare. - * \param[in] y First value to compare. - * - * \return The smaller of the two input parameters - */ - #if !defined(MIN) || defined(__DOXYGEN__) - #define MIN(x, y) (((x) < (y)) ? (x) : (y)) - #endif - - #if !defined(STRINGIFY) || defined(__DOXYGEN__) - /** Converts the given input into a string, via the C Preprocessor. This macro puts literal quotation - * marks around the input, converting the source into a string literal. - * - * \param[in] x Input to convert into a string literal. - * - * \return String version of the input. - */ - #define STRINGIFY(x) #x - - /** Converts the given input into a string after macro expansion, via the C Preprocessor. This macro puts - * literal quotation marks around the expanded input, converting the source into a string literal. - * - * \param[in] x Input to expand and convert into a string literal. - * - * \return String version of the expanded input. - */ - #define STRINGIFY_EXPANDED(x) STRINGIFY(x) - #endif - - #if !defined(CONCAT) || defined(__DOXYGEN__) - /** Concatenates the given input into a single token, via the C Preprocessor. - * - * \param[in] x First item to concatenate. - * \param[in] y Second item to concatenate. - * - * \return Concatenated version of the input. - */ - #define CONCAT(x, y) x ## y - - /** CConcatenates the given input into a single token after macro expansion, via the C Preprocessor. - * - * \param[in] x First item to concatenate. - * \param[in] y Second item to concatenate. - * - * \return Concatenated version of the expanded input. - */ - #define CONCAT_EXPANDED(x, y) CONCAT(x, y) - #endif - - #if !defined(ISR) || defined(__DOXYGEN__) - /** Macro for the definition of interrupt service routines, so that the compiler can insert the required - * prologue and epilogue code to properly manage the interrupt routine without affecting the main thread's - * state with unintentional side-effects. - * - * Interrupt handlers written using this macro may still need to be registered with the microcontroller's - * Interrupt Controller (if present) before they will properly handle incoming interrupt events. - * - * \note This macro is only supplied on some architectures, where the standard library does not include a valid - * definition. If an existing definition exists, the alternative definition here will be ignored. - * - * \ingroup Group_GlobalInt - * - * \param[in] Name Unique name of the interrupt service routine. - */ - #define ISR(Name, ...) void Name (void) __attribute__((__interrupt__)) __VA_ARGS__; void Name (void) - #endif - - /* Inline Functions: */ - /** Function to reverse the individual bits in a byte - i.e. bit 7 is moved to bit 0, bit 6 to bit 1, - * etc. - * - * \param[in] Byte Byte of data whose bits are to be reversed. - * - * \return Input data with the individual bits reversed (mirrored). - */ - static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST; - static inline uint8_t BitReverse(uint8_t Byte) - { - Byte = (((Byte & 0xF0) >> 4) | ((Byte & 0x0F) << 4)); - Byte = (((Byte & 0xCC) >> 2) | ((Byte & 0x33) << 2)); - Byte = (((Byte & 0xAA) >> 1) | ((Byte & 0x55) << 1)); - - return Byte; - } - - /** Function to perform a blocking delay for a specified number of milliseconds. The actual delay will be - * at a minimum the specified number of milliseconds, however due to loop overhead and internal calculations - * may be slightly higher. - * - * \param[in] Milliseconds Number of milliseconds to delay - */ - static inline void Delay_MS(uint16_t Milliseconds) ATTR_ALWAYS_INLINE; - static inline void Delay_MS(uint16_t Milliseconds) - { - #if (ARCH == ARCH_AVR8) - if (GCC_IS_COMPILE_CONST(Milliseconds)) - { - _delay_ms(Milliseconds); - } - else - { - while (Milliseconds--) - _delay_ms(1); - } - #elif (ARCH == ARCH_UC3) - while (Milliseconds--) - { - __builtin_mtsr(AVR32_COUNT, 0); - while ((uint32_t)__builtin_mfsr(AVR32_COUNT) < (F_CPU / 1000)); - } - #elif (ARCH == ARCH_XMEGA) - if (GCC_IS_COMPILE_CONST(Milliseconds)) - { - _delay_ms(Milliseconds); - } - else - { - while (Milliseconds--) - _delay_ms(1); - } - #endif - } - - /** Retrieves a mask which contains the current state of the global interrupts for the device. This - * value can be stored before altering the global interrupt enable state, before restoring the - * flag(s) back to their previous values after a critical section using \ref SetGlobalInterruptMask(). - * - * \ingroup Group_GlobalInt - * - * \return Mask containing the current Global Interrupt Enable Mask bit(s). - */ - static inline uint_reg_t GetGlobalInterruptMask(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; - static inline uint_reg_t GetGlobalInterruptMask(void) - { - GCC_MEMORY_BARRIER(); - - #if (ARCH == ARCH_AVR8) - return SREG; - #elif (ARCH == ARCH_UC3) - return __builtin_mfsr(AVR32_SR); - #elif (ARCH == ARCH_XMEGA) - return SREG; - #endif - } - - /** Sets the global interrupt enable state of the microcontroller to the mask passed into the function. - * This can be combined with \ref GetGlobalInterruptMask() to save and restore the Global Interrupt Enable - * Mask bit(s) of the device after a critical section has completed. - * - * \ingroup Group_GlobalInt - * - * \param[in] GlobalIntState Global Interrupt Enable Mask value to use - */ - static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) ATTR_ALWAYS_INLINE; - static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) - { - GCC_MEMORY_BARRIER(); - - #if (ARCH == ARCH_AVR8) - SREG = GlobalIntState; - #elif (ARCH == ARCH_UC3) - if (GlobalIntState & AVR32_SR_GM) - __builtin_ssrf(AVR32_SR_GM_OFFSET); - else - __builtin_csrf(AVR32_SR_GM_OFFSET); - #elif (ARCH == ARCH_XMEGA) - SREG = GlobalIntState; - #endif - - GCC_MEMORY_BARRIER(); - } - - /** Enables global interrupt handling for the device, allowing interrupts to be handled. - * - * \ingroup Group_GlobalInt - */ - static inline void GlobalInterruptEnable(void) ATTR_ALWAYS_INLINE; - static inline void GlobalInterruptEnable(void) - { - GCC_MEMORY_BARRIER(); - - #if (ARCH == ARCH_AVR8) - sei(); - #elif (ARCH == ARCH_UC3) - __builtin_csrf(AVR32_SR_GM_OFFSET); - #elif (ARCH == ARCH_XMEGA) - sei(); - #endif - - GCC_MEMORY_BARRIER(); - } - - /** Disabled global interrupt handling for the device, preventing interrupts from being handled. - * - * \ingroup Group_GlobalInt - */ - static inline void GlobalInterruptDisable(void) ATTR_ALWAYS_INLINE; - static inline void GlobalInterruptDisable(void) - { - GCC_MEMORY_BARRIER(); - - #if (ARCH == ARCH_AVR8) - cli(); - #elif (ARCH == ARCH_UC3) - __builtin_ssrf(AVR32_SR_GM_OFFSET); - #elif (ARCH == ARCH_XMEGA) - cli(); - #endif - - GCC_MEMORY_BARRIER(); - } - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h deleted file mode 100644 index 9979fffbb..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Compiler specific definitions for code optimization and correctness. - * - * \copydetails Group_CompilerSpecific - * - * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's - * functionality. - */ - -/** \ingroup Group_Common - * \defgroup Group_CompilerSpecific Compiler Specific Definitions - * \brief Compiler specific definitions for code optimization and correctness. - * - * Compiler specific definitions to expose certain compiler features which may increase the level of code optimization - * for a specific compiler, or correct certain issues that may be present such as memory barriers for use in conjunction - * with atomic variable access. - * - * Where possible, on alternative compilers, these macros will either have no effect, or default to returning a sane value - * so that they can be used in existing code without the need for extra compiler checks in the user application code. - * - * @{ - */ - -#ifndef __LUFA_COMPILERSPEC_H__ -#define __LUFA_COMPILERSPEC_H__ - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if defined(__GNUC__) || defined(__DOXYGEN__) - /** Forces GCC to use pointer indirection (via the device's pointer register pairs) when accessing the given - * struct pointer. In some cases GCC will emit non-optimal assembly code when accessing a structure through - * a pointer, resulting in a larger binary. When this macro is used on a (non \c const) structure pointer before - * use, it will force GCC to use pointer indirection on the elements rather than direct store and load - * instructions. - * - * \param[in, out] StructPtr Pointer to a structure which is to be forced into indirect access mode. - */ - #define GCC_FORCE_POINTER_ACCESS(StructPtr) __asm__ __volatile__("" : "=b" (StructPtr) : "0" (StructPtr)) - - /** Forces GCC to create a memory barrier, ensuring that memory accesses are not reordered past the barrier point. - * This can be used before ordering-critical operations, to ensure that the compiler does not re-order the resulting - * assembly output in an unexpected manner on sections of code that are ordering-specific. - */ - #define GCC_MEMORY_BARRIER() __asm__ __volatile__("" ::: "memory"); - - /** Determines if the specified value can be determined at compile-time to be a constant value when compiling under GCC. - * - * \param[in] x Value to check compile-time constantness of. - * - * \return Boolean \c true if the given value is known to be a compile time constant, \c false otherwise. - */ - #define GCC_IS_COMPILE_CONST(x) __builtin_constant_p(x) - #else - #define GCC_FORCE_POINTER_ACCESS(StructPtr) - #define GCC_MEMORY_BARRIER() - #define GCC_IS_COMPILE_CONST(x) 0 - #endif - -#endif - -/** @} */ - diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h deleted file mode 100644 index 2eb3ad094..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h +++ /dev/null @@ -1,493 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Endianness and Byte Ordering macros and functions. - * - * \copydetails Group_Endianness - */ - -/** \ingroup Group_Endianness - * \defgroup Group_ByteSwapping Byte Reordering - * \brief Macros and functions for forced byte reordering. - */ - -/** \ingroup Group_Endianness - * \defgroup Group_EndianConversion Endianness Conversion - * \brief Macros and functions for automatic endianness conversion. - */ - -/** \ingroup Group_Common - * \defgroup Group_Endianness Endianness and Byte Ordering - * \brief Convenience macros and functions relating to byte (re-)ordering - * - * Common library convenience macros and functions relating to byte (re-)ordering. - * - * @{ - */ - -#ifndef __LUFA_ENDIANNESS_H__ -#define __LUFA_ENDIANNESS_H__ - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_COMMON_H) - #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. - #endif - - #if !(defined(ARCH_BIG_ENDIAN) || defined(ARCH_LITTLE_ENDIAN)) - #error ARCH_BIG_ENDIAN or ARCH_LITTLE_ENDIAN not set for the specified architecture. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Swaps the byte ordering of a 16-bit value at compile-time. Do not use this macro for swapping byte orderings - * of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used - * inside struct or other variable initializers outside of a function, something that is not possible with the - * inline function variant. - * - * \hideinitializer - * - * \ingroup Group_ByteSwapping - * - * \param[in] x 16-bit value whose byte ordering is to be swapped. - * - * \return Input value with the byte ordering reversed. - */ - #define SWAPENDIAN_16(x) (uint16_t)((((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)) - - /** Swaps the byte ordering of a 32-bit value at compile-time. Do not use this macro for swapping byte orderings - * of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used - * inside struct or other variable initializers outside of a function, something that is not possible with the - * inline function variant. - * - * \hideinitializer - * - * \ingroup Group_ByteSwapping - * - * \param[in] x 32-bit value whose byte ordering is to be swapped. - * - * \return Input value with the byte ordering reversed. - */ - #define SWAPENDIAN_32(x) (uint32_t)((((x) & 0xFF000000UL) >> 24UL) | (((x) & 0x00FF0000UL) >> 8UL) | \ - (((x) & 0x0000FF00UL) << 8UL) | (((x) & 0x000000FFUL) << 24UL)) - - #if defined(ARCH_BIG_ENDIAN) && !defined(le16_to_cpu) - #define le16_to_cpu(x) SwapEndian_16(x) - #define le32_to_cpu(x) SwapEndian_32(x) - #define be16_to_cpu(x) (x) - #define be32_to_cpu(x) (x) - #define cpu_to_le16(x) SwapEndian_16(x) - #define cpu_to_le32(x) SwapEndian_32(x) - #define cpu_to_be16(x) (x) - #define cpu_to_be32(x) (x) - #define LE16_TO_CPU(x) SWAPENDIAN_16(x) - #define LE32_TO_CPU(x) SWAPENDIAN_32(x) - #define BE16_TO_CPU(x) (x) - #define BE32_TO_CPU(x) (x) - #define CPU_TO_LE16(x) SWAPENDIAN_16(x) - #define CPU_TO_LE32(x) SWAPENDIAN_32(x) - #define CPU_TO_BE16(x) (x) - #define CPU_TO_BE32(x) (x) - #elif !defined(le16_to_cpu) - /** \name Run-time endianness conversion */ - //@{ - - /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref LE16_TO_CPU instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define le16_to_cpu(x) (x) - - /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref LE32_TO_CPU instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define le32_to_cpu(x) (x) - - /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref BE16_TO_CPU instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define be16_to_cpu(x) SwapEndian_16(x) - - /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref BE32_TO_CPU instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define be32_to_cpu(x) SwapEndian_32(x) - - /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it - * is in Little Endian format regardless of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref CPU_TO_LE16 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define cpu_to_le16(x) (x) - - /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it - * is in Little Endian format regardless of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref CPU_TO_LE32 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define cpu_to_le32(x) (x) - - /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it - * is in Big Endian format regardless of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref CPU_TO_BE16 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define cpu_to_be16(x) SwapEndian_16(x) - - /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it - * is in Big Endian format regardless of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for run-time conversion of data - for compile-time endianness - * conversion, use \ref CPU_TO_BE32 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define cpu_to_be32(x) SwapEndian_32(x) - - //@} - - /** \name Compile-time endianness conversion */ - //@{ - - /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run time endianness - * conversion, use \ref le16_to_cpu instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define LE16_TO_CPU(x) (x) - - /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run time endianness - * conversion, use \ref le32_to_cpu instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define LE32_TO_CPU(x) (x) - - /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref be16_to_cpu instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define BE16_TO_CPU(x) SWAPENDIAN_16(x) - - /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the - * Endianness of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref be32_to_cpu instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define BE32_TO_CPU(x) SWAPENDIAN_32(x) - - /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it - * is in Little Endian format regardless of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref cpu_to_le16 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define CPU_TO_LE16(x) (x) - - /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it - * is in Little Endian format regardless of the currently selected CPU architecture. - * - * On little endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref cpu_to_le32 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define CPU_TO_LE32(x) (x) - - /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it - * is in Big Endian format regardless of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref cpu_to_be16 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define CPU_TO_BE16(x) SWAPENDIAN_16(x) - - /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it - * is in Big Endian format regardless of the currently selected CPU architecture. - * - * On big endian architectures, this macro does nothing. - * - * \note This macro is designed for compile-time conversion of data - for run-time endianness - * conversion, use \ref cpu_to_be32 instead. - * - * \ingroup Group_EndianConversion - * - * \param[in] x Data to perform the endianness conversion on. - * - * \return Endian corrected version of the input value. - */ - #define CPU_TO_BE32(x) SWAPENDIAN_32(x) - - //! @} - #endif - - /* Inline Functions: */ - /** Function to reverse the byte ordering of the individual bytes in a 16 bit value. - * - * \ingroup Group_ByteSwapping - * - * \param[in] Word Word of data whose bytes are to be swapped. - * - * \return Input data with the individual bytes reversed. - */ - static inline uint16_t SwapEndian_16(const uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST; - static inline uint16_t SwapEndian_16(const uint16_t Word) - { - if (GCC_IS_COMPILE_CONST(Word)) - return SWAPENDIAN_16(Word); - - uint8_t Temp; - - union - { - uint16_t Word; - uint8_t Bytes[2]; - } Data; - - Data.Word = Word; - - Temp = Data.Bytes[0]; - Data.Bytes[0] = Data.Bytes[1]; - Data.Bytes[1] = Temp; - - return Data.Word; - } - - /** Function to reverse the byte ordering of the individual bytes in a 32 bit value. - * - * \ingroup Group_ByteSwapping - * - * \param[in] DWord Double word of data whose bytes are to be swapped. - * - * \return Input data with the individual bytes reversed. - */ - static inline uint32_t SwapEndian_32(const uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST; - static inline uint32_t SwapEndian_32(const uint32_t DWord) - { - if (GCC_IS_COMPILE_CONST(DWord)) - return SWAPENDIAN_32(DWord); - - uint8_t Temp; - - union - { - uint32_t DWord; - uint8_t Bytes[4]; - } Data; - - Data.DWord = DWord; - - Temp = Data.Bytes[0]; - Data.Bytes[0] = Data.Bytes[3]; - Data.Bytes[3] = Temp; - - Temp = Data.Bytes[1]; - Data.Bytes[1] = Data.Bytes[2]; - Data.Bytes[2] = Temp; - - return Data.DWord; - } - - /** Function to reverse the byte ordering of the individual bytes in a n byte value. - * - * \ingroup Group_ByteSwapping - * - * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed. - * \param[in] Length Length of the data in bytes. - * - * \return Input data with the individual bytes reversed. - */ - static inline void SwapEndian_n(void* const Data, - uint8_t Length) ATTR_NON_NULL_PTR_ARG(1); - static inline void SwapEndian_n(void* const Data, - uint8_t Length) - { - uint8_t* CurrDataPos = (uint8_t*)Data; - - while (Length > 1) - { - uint8_t Temp = *CurrDataPos; - *CurrDataPos = *(CurrDataPos + Length - 1); - *(CurrDataPos + Length - 1) = Temp; - - CurrDataPos++; - Length -= 2; - } - } - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |