summaryrefslogtreecommitdiffstats
path: root/keyboards
AgeCommit message (Collapse)AuthorFilesLines
2017-12-12The ruler (#2138)That-Canadian9-0/+382
* Line ending stuff again * Added initital files and layout for the PCB Ruler keyboard/macro pad thing * Updated Readme * Changed make command to new format
2017-12-10Add rasmus keymap and fix default keymap readmeRasmus Schults5-3/+132
2017-12-10adds the gh80_3000 project (#2132)farmakon11-0/+472
2017-12-10Add Lightsaver V3 keyboardRasmus Schults10-0/+678
2017-12-10update planck settingsJack Humbert3-5/+2
2017-12-10Don't "unselect" left-hand rowsSeebs1-11/+3
"unselecting" left-hand rows is a wasted i2c transaction. On the left-hand side, the ergodox uses a GPIO expander. It does *not* change "direction" (input/output) of pins, it just sets pins high or low. But all the pins are written at once. There's no way to change just one pin's value; you send a full byte of all eight row pins. (Not all of them are in use, but that doesn't matter.) So every pin is either +V or ground. This is in contrast with the right-hand side, which is using input mode to make pins be neutral. So there's no need to "deselect" the rows on the left side at all. To select row 0, you set the GPIO register for the rows to 0xFE. The previous code would then set it back to 0xFF, then set it to 0xFD on the next cycle. But we can just omit the intervening step, and set it to 0xFD next cycle, and get the same results. And yes, I tested that the keyboard still works. On my system, scan rate as reported by DEBUG_SCAN_RATE goes from 445 or so to 579 or so, thus, from ~2.24ms to ~1.73ms. Signed-off-by: seebs <seebs@seebs.net>
2017-12-10change the ?= assignments to =Balz Guenat1-11/+11
2017-12-10some planck keymap shiftings and include proper-makingBalz Guenat2-7/+7
2017-12-10clean up bananasplit keymapBalz Guenat4-40/+39
2017-12-09New Planck Layout (#2123)Nico Hormazábal4-0/+427
* added own keymap for planck * Update Readme.md * Update Readme.md * Update Readme.md * Update Readme.md * Update Readme.md
2017-12-09Turn on prevent stuck modifiers for my keymaps.Fredric Silberberg1-2/+1
2017-12-09Updated copyright headers and peer review fixesCole Markham6-11/+6
2017-12-09Update Meira readmeCole Markham1-16/+19
2017-12-09Add support for MeiraCole Markham23-0/+2186
2017-12-09Add support for LFKeyboard products: LFK78, LFK87 and SMK65Scott Wilson37-0/+3180
2017-12-08Updated readmeMartin Gondermann1-1/+1
2017-12-08Updated color for base layer to better match my key caps (Dasher)Martin Gondermann3-11/+2
2017-12-08Pointing to the right build URLGaëtan Ark1-1/+1
The previous URI used to point to the Nyquist keyboard build guide.
2017-12-08Enable tap dance and other features for Whitefoxandy2-0/+19
The custom matrix code was missing calls to matrix_*_quantum, disabling quantum features.
2017-12-08add do60 supportUnknown9-0/+321
2017-12-07Add support for 7x4 ortholinear split KB Ergo42Biacco4222-0/+1674
2017-12-07F5 pin doesn't support PWM, so breathing isn't an optionColin T.A. Gray1-1/+0
2017-12-06Updates to drashna keymaps and userspace (#2093)Drashna Jaelre5-27/+35
* Add "secret" macor * Updating secret macros * Re-add RGB to Ergodox * Fixed issue when RGB was disabled * Consistency changes * Updated bootloader macro * Fixing audio setup * Fix bootloader typo * Update to full list of stings (for completeness) * Template fix * Finally got woodpad to force numlock * Fix for new RGB mode
2017-12-05Katana60 (#2068)Baris Tosun14-0/+768
* Add files via upload * katana60 defaults, initial pull-request * removed icons from google drive * added simple readme files * pull-request updates * readme file updated * readme file formatting * improvements before live * colemak readme * updated readme files * removed makefiles and updated readme
2017-12-05Fix Audio chime overrides in split keyboardsDrashna Jael're8-134/+0
2017-12-05adds led control functions to XD75 layoutColin T.A. Gray3-0/+118
2017-12-05Add Crawlpad 2017 files.Cole Markham7-0/+262
2017-12-03Magicforce68 now in bluetooth flavour (#2051)Harshit Goel6-0/+372
* Added working code for mf68_ble * update read.md * update read.md * update read.md * update readme * Update README.md * Update README.md * added reddit post * Update README.md * Update README.md
2017-12-03Remove unnecessary audio code from orthodox (#2076)Drashna Jaelre1-25/+7
* Remove unnecessary startup/shutdown code * Leave functions intact * Update rev1.c
2017-12-03Add keymap for atreus and minidox (#2079)khitsule6-0/+199
* keymap for atreus and minidox * minidox keymap khitsule cleaned
2017-12-03Modified default keymap to match ps2avrgb defaultEthan Madden1-4/+10
2017-11-28Updates bootloader settings, adds file size check (#2029)Jack Humbert64-432/+225
* pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-11-27JJ40 updates (#2056)RandTrawick8-0/+247
* my bits * fixed safdb * readme * readme * better name, fixed compile error * fixed matrix user * cleanup
2017-11-27Merge pull request #2047 from seebs/seebs/ergodox_brightnessErez Zukerman3-1/+10
Make brightness easier to change
2017-11-26Fix build instructions in the Dactyl readmeErin Call1-3/+5
Reflects the changes in #1784
2017-11-26Initial support for TKC1800 PCB (#2062)TerryMathews7-0/+489
* Initial support for TKC1800 * Correct typo
2017-11-26Fixed bootloader access keyEiji Onchi1-2/+2
2017-11-26Handwired/Dactyl keyboard (#2058)Erin Call14-0/+1675
* Copy the ergodox_ez code to handwired/dactyl Differences from the Ergodox: * Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under handwired * Omitted several keymaps. They'll eventually be broken (since the Dactyl has fewer keys), and I don't want to try to fix them. * Omitted the keymap images for the default layout, since they depict a different keyboard. * Everything that said Ergodox now says Dactyl, naturally. * [whitespace] Delete trailing whitespace My editor does this automatically so it's just gonna keep cropping up... * Cut the dactyl down to the right number of columns (Remember, throughout matrix.c, everything called "row" is really a column, and vice-versa). * Remove LED-related code * Tighten up the Dactyl's build options * Whitespace cleanup in twimaster.c * Hardtabs -> spaces * No more trailing whitespace * Typo fix * Correct the CPU frequency units The Teensy's CPU definitely doesn't run at 16 petahertz... * Restore access to ONEHAND_ENABLE I turned it off in 26d47cb42622d990a7c3335e7fcc151aa3edfbf0 while desperately debugging; I just wanted to ensure it wasn't causing the problem I was seeing. It was not, in fact, causing the problem, so it's back. Also fixed the swap matrix in dactyl.c, since it still referred to columns that exist in the Ergodox but not the Dactyl. * Clearer phrasing about TWI's effect on scan rate * Fix up the Dactyl's firmware-loading instructions Sadly, the Dactyl has no hole for the onboard reset button. * Dvorak keymap for the Dactyl * The Erincalling Layout * Erincalling layout: Add a := key I've been working in Go, which uses := a lot, and it's awkward to type in this layout. * Dactyl README: link to the dactyl-keyboard repo * Add a missing copyright line I don't know how much this matters? Honestly, it's enough for me that my name is on the git commit. But hey, let's be consistent until there's a specific reason not to be, right? * Dactyl: remove commented-out code I hate it I hate it I hate it There's not even any information about what it was trying to do!!!! >:( * Add a note about the row/column ridiculousness * [whitespace] realign some constants * Don't claim B4 is tied to VCC It doesn't matter at all? I honestly don't know what the reason ever was. It looks like it dates back to the original ErgoDox and I've never seen one sentence about the purpose. I've been skipping that wire for some time, and I promise it works fine. * Dactyl keymaps: Send RALT for right-hand alt key Not terribly important but I just like things tidy OK * typo fix * Refer to "dactyl.h" explicitly QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange! * Dactyl: Don't use QMK_SUBPROJECT_H at all It's still breaking in CI, even though it was a never a problem locally.
2017-11-26Fc660c port (#2060)Balz Guenat9-0/+697
* Port Hasu's FC660C controller to QMK * fix column mask
2017-11-26added addcninblue's layout (#2049)Add Chan3-0/+230
* added addcninblue's layout * vim layer
2017-11-26Keymap update (#2045)Callum Oakley3-160/+254
* linux shake-around * move terminal and browser spawning keys * add a shift to window resizing keys to free combo up for window management * "jump to tab" shortcuts for firefox * change window resize modifiers * change wm keys * change wm keys again, and reformat keymap to 80chars * typos * language key * qwerty layer for SO, general cleanup
2017-11-26Update my keymap (#2042)shela2-11/+23
* fix bug * update keymap
2017-11-26Adds my XD75 layout (#2040)Colin T.A. Gray3-0/+360
* adds my xd75 layout * add secret strings to 'secrets.h' behind compile flag, assign defaults * macro keys now have defaults (hidden in colinta.h) before any recording, and after clearing the dynamic macros. * fixed whitespace - using 4 spaces instead of 2
2017-11-26improve ergodox ez performanceSeebs2-20/+34
With these changes, the ergodox ez goes from 315 scans per second when no keys are pressed (~3.17ms/scan) to 447 (~2.24ms/scan). The changes to the pin read are just condensing the logic, and replacing a lot of conditional operations with a single bitwise inversion. The change to row scanning is more significant, and merits explanation. In general, you can only scan one row of a keyboard at a time, because if you scan two rows, you no longer know which row is pulling a given column down. But in the Ergodox design, this isn't the case; the left hand is controlled by an I2C-based GPIO expander, and the columns and rows are *completely separate* electrically from the columns and rows on the right-hand side. So simply reading rows in parallel offers two significant improvements. One is that we no longer need the 30us delay after each right-hand row, because we're spending more than 30us communicating with the left hand over i2c. Another is that we're no longer wastefully sending i2c messages to the left hand to unselect rows when no rows had actually been selected in the first place. These delays were, between them, coming out to nearly 30% of the time spent in each scan. Signed-off-by: seebs <seebs@seebs.net>
2017-11-26fix typoSeebs1-1/+1
2017-11-26Add my Atreus62 keymapPaul Ewing1-0/+97
2017-11-24I forgot to add a README.md for the FC980CBalz Guenat1-0/+175
sorry for forgetting it in the first PR.
2017-11-23Make brightness easier to changeSeebs3-1/+10
Don't make the #defines unconditional, make them optional so users can override them with per-keymap settings more easily.
2017-11-23QMK port of Hasu's fc980c alt controller (#2043)Balz Guenat11-0/+642
* fc980c port, builds but yet untested. * add my own keymap
2017-11-22this number just looks wrong, should be 4096 not 4996Colin T.A. Gray1-1/+1
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-07-01 07:06:36 +0200