From 0a005834624e9b3247bcd48fdc1790df8611ba86 Mon Sep 17 00:00:00 2001 From: Joshua Magee <31995879+jmagee@users.noreply.github.com> Date: Thu, 2 Aug 2018 13:52:24 -0700 Subject: Keyboard: Document the correct path to the let's split EEPROM files. (#3539) * Document the correct path to the let's split EEPROM files. * Document the EEPROM files in /quantum/split_common/ as the canonical location. --- keyboards/vitamins_included/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/vitamins_included/readme.md b/keyboards/vitamins_included/readme.md index 0163f154e..84bab9007 100644 --- a/keyboards/vitamins_included/readme.md +++ b/keyboards/vitamins_included/readme.md @@ -104,7 +104,7 @@ If this is the first time you're flashing the boards, you have to flash EEPROM 2. Run `ls /dev | grep tty` Note down which ports you see 2. Plug the keyboard in, if it's new, it should enter bootloader, if it's not new, see **Entering bootloader** on how to enter bootloader mode 4. Right after entering bootloader, run `ls /dev | grep tty` again. There should be a new tty, this is the bootloader TTY, note it down. If nothing shows see **Entering bootloader** on how to enter bootloader mode -6. For the left hand side, run `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./keyboards/lets_split_vitamins/eeprom-lefthand.eep":a` +6. For the left hand side, run `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep":a` Replace ***/dev/ttyS1*** with the port you noted down earlier. If you're on windows using msys2, replace ***/dev/ttyS1*** with COM2, note that the number is one higher than the tty number. Do the same For the right hand, but change the file to ***eeprom-righthand.eep*** -- cgit v1.2.3-24-g4f1b