From 14b7602a65dedaf51db1c9288144765d43a83a15 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 8 May 2018 15:24:18 -0400 Subject: Adds IS31FL3731 RGB Matrix Implementation (#2910) * adds is31fl3731 rgb matrix implementation * fix build script for force pushes * allow bootloader size to be overwritten * adds planck light implementation * split led config into 2 arrays * idk * betterize register handling * update planck implementation * update planck * refine rgb interface * cleanup names, rgb matrix * start documentation * finish up docs * add effects list * clean-up merge * add RGB_MATRIX_SKIP_FRAMES * add support for at90usb1286 to bootloader options --- bootloader.mk | 23 +- common_features.mk | 9 + docs/feature_rgb_matrix.md | 141 +++++++ drivers/avr/TWIlib.c | 232 +++++++++++ drivers/avr/TWIlib.h | 82 ++++ drivers/avr/is31fl3731.c | 258 ++++++++++++ drivers/avr/is31fl3731.h | 214 ++++++++++ keyboards/planck/light/config.h | 19 +- keyboards/planck/light/light.c | 141 ++++++- keyboards/planck/light/light.h | 4 +- keyboards/planck/light/rules.mk | 4 +- keyboards/planck/rules.mk | 2 +- quantum/color.c | 87 ++++ quantum/color.h | 55 +++ quantum/quantum.c | 23 +- quantum/quantum.h | 6 + quantum/rgb.h | 47 +++ quantum/rgb_matrix.c | 873 ++++++++++++++++++++++++++++++++++++++++ quantum/rgb_matrix.h | 135 +++++++ 19 files changed, 2336 insertions(+), 19 deletions(-) create mode 100644 docs/feature_rgb_matrix.md create mode 100644 drivers/avr/TWIlib.c create mode 100644 drivers/avr/TWIlib.h create mode 100644 drivers/avr/is31fl3731.c create mode 100644 drivers/avr/is31fl3731.h create mode 100644 quantum/color.c create mode 100644 quantum/color.h create mode 100644 quantum/rgb.h create mode 100644 quantum/rgb_matrix.c create mode 100644 quantum/rgb_matrix.h diff --git a/bootloader.mk b/bootloader.mk index 55352f3d4..f30e38dd0 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -32,17 +32,32 @@ ifeq ($(strip $(BOOTLOADER)), atmel-dfu) OPT_DEFS += -DBOOTLOADER_ATMEL_DFU OPT_DEFS += -DBOOTLOADER_DFU - BOOTLOADER_SIZE = 4096 + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 4096 + endif + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 8192 + endif endif ifeq ($(strip $(BOOTLOADER)), lufa-dfu) OPT_DEFS += -DBOOTLOADER_LUFA_DFU OPT_DEFS += -DBOOTLOADER_DFU - BOOTLOADER_SIZE = 4096 + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 4096 + endif + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 8192 + endif endif ifeq ($(strip $(BOOTLOADER)), qmk-dfu) OPT_DEFS += -DBOOTLOADER_QMK_DFU OPT_DEFS += -DBOOTLOADER_DFU - BOOTLOADER_SIZE = 4096 + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 4096 + endif + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 8192 + endif endif ifeq ($(strip $(BOOTLOADER)), halfkay) OPT_DEFS += -DBOOTLOADER_HALFKAY @@ -59,4 +74,4 @@ endif ifdef BOOTLOADER_SIZE OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) -endif \ No newline at end of file +endif diff --git a/common_features.mk b/common_features.mk index 7bd43afdb..7ba7d4815 100644 --- a/common_features.mk +++ b/common_features.mk @@ -114,6 +114,15 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) endif endif +ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) + OPT_DEFS += -DRGB_MATRIX_ENABLE + SRC += is31fl3731.c + SRC += TWIlib.c + SRC += $(QUANTUM_DIR)/color.c + SRC += $(QUANTUM_DIR)/rgb_matrix.c + CIE1931_CURVE = yes +endif + ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) OPT_DEFS += -DTAP_DANCE_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md new file mode 100644 index 000000000..dfc103247 --- /dev/null +++ b/docs/feature_rgb_matrix.md @@ -0,0 +1,141 @@ +# RGB Matrix Lighting + +There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: + + RGB_MATRIX_ENABLE = yes + +Configure the hardware via your `config.h`: + + // This is a 7-bit address, that gets left-shifted and bit 0 + // set to 0 for write, 1 for read (as per I2C protocol) + // The address will vary depending on your wiring: + // 0b1110100 AD <-> GND + // 0b1110111 AD <-> VCC + // 0b1110101 AD <-> SCL + // 0b1110110 AD <-> SDA + #define DRIVER_ADDR_1 0b1110100 + #define DRIVER_ADDR_2 0b1110110 + + #define DRIVER_COUNT 2 + #define DRIVER_1_LED_TOTAL 25 + #define DRIVER_2_LED_TOTAL 24 + #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL + +Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. + +Define these arrays listing all the LEDs in your `.c`: + + const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + /* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3}, + .... + } + +Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf). The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). + + const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + /* {row | col << 4} + * | {x=0..224, y=0..64} + * | | modifier + * | | | */ + {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, + {{0|(1<<4)}, {20.36*1, 21.33*0}, 1}, + .... + } + +The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is: + + x = 224 / ( NUMBER_OF_ROWS - 1 ) * ROW_POSITION + y = 64 / (NUMBER_OF_COLS - 1 ) * COL_POSITION + +Where all variables are decimels/floats. + +`modifier` is a boolean, whether or not a certain key is considered a modifier (used in some effects). + +## Keycodes + +All RGB keycodes are currently shared with the RGBLIGHT system: + + * `RGB_TOG` - toggle + * `RGB_MOD` - cycle through modes + * `RGB_HUI` - increase hue + * `RGB_HUD` - decrease hue + * `RGB_SAI` - increase saturation + * `RGB_SAD` - decrease saturation + * `RGB_VAI` - increase value + * `RGB_VAD` - decrease value + + + * `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system + +## RGB Matrix Effects + +These are the effects that are currently available: + + enum rgb_matrix_effects { + RGB_MATRIX_SOLID_COLOR = 1, + RGB_MATRIX_SOLID_REACTIVE, + RGB_MATRIX_ALPHAS_MODS, + RGB_MATRIX_DUAL_BEACON, + RGB_MATRIX_GRADIENT_UP_DOWN, + RGB_MATRIX_RAINDROPS, + RGB_MATRIX_CYCLE_ALL, + RGB_MATRIX_CYCLE_LEFT_RIGHT, + RGB_MATRIX_CYCLE_UP_DOWN, + RGB_MATRIX_RAINBOW_BEACON, + RGB_MATRIX_RAINBOW_PINWHEELS, + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, + RGB_MATRIX_JELLYBEAN_RAINDROPS, + #ifdef RGB_MATRIX_KEYPRESSES + RGB_MATRIX_SPLASH, + RGB_MATRIX_MULTISPLASH, + RGB_MATRIX_SOLID_SPLASH, + RGB_MATRIX_SOLID_MULTISPLASH, + #endif + RGB_MATRIX_EFFECT_MAX + }; + +## Custom layer effects + +Custom layer effects can be done by defining this in your `.c`: + + void rgb_matrix_indicators_kb(void) { + // rgb_matrix_set_color(index, red, green, blue); + } + +A similar function works in the keymap as `rgb_matrix_indicators_user`. + +## Additional `config.h` Options + + #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) + #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) + #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects + #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended + #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) + +## EEPROM storage + +The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with: + + #define EECONFIG_RGB_MATRIX (uint32_t *)16 + +Where `16` is an unused index from `eeconfig.h`. + +## Suspended state + +To use the suspend feature, add this to your `.c`: + + void suspend_power_down_kb(void) + { + rgb_matrix_set_suspend_state(true); + } + + void suspend_wakeup_init_kb(void) + { + rgb_matrix_set_suspend_state(false); + } diff --git a/drivers/avr/TWIlib.c b/drivers/avr/TWIlib.c new file mode 100644 index 000000000..b39e3054a --- /dev/null +++ b/drivers/avr/TWIlib.c @@ -0,0 +1,232 @@ +/* + * TWIlib.c + * + * Created: 6/01/2014 10:41:33 PM + * Author: Chris Herring + * http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/ + */ + +#include +#include +#include "TWIlib.h" +#include "util/delay.h" + +void TWIInit() +{ + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWIInfo.repStart = 0; + // Set pre-scalers (no pre-scaling) + TWSR = 0; + // Set bit rate + TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; + // Enable TWI and interrupt + TWCR = (1 << TWIE) | (1 << TWEN); +} + +uint8_t isTWIReady() +{ + if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) ) + { + return 1; + } + else + { + return 0; + } +} + +uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart) +{ + if (dataLen <= TXMAXBUFLEN) + { + // Wait until ready + while (!isTWIReady()) {_delay_us(1);} + // Set repeated start mode + TWIInfo.repStart = repStart; + // Copy data into the transmit buffer + uint8_t *data = (uint8_t *)TXdata; + for (int i = 0; i < dataLen; i++) + { + TWITransmitBuffer[i] = data[i]; + } + // Copy transmit info to global variables + TXBuffLen = dataLen; + TXBuffIndex = 0; + + // If a repeated start has been sent, then devices are already listening for an address + // and another start does not need to be sent. + if (TWIInfo.mode == RepeatedStartSent) + { + TWIInfo.mode = Initializing; + TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer + TWISendTransmit(); // Send the data + } + else // Otherwise, just send the normal start signal to begin transmission. + { + TWIInfo.mode = Initializing; + TWISendStart(); + } + + } + else + { + return 1; // return an error if data length is longer than buffer + } + return 0; +} + +uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart) +{ + // Check if number of bytes to read can fit in the RXbuffer + if (bytesToRead < RXMAXBUFLEN) + { + // Reset buffer index and set RXBuffLen to the number of bytes to read + RXBuffIndex = 0; + RXBuffLen = bytesToRead; + // Create the one value array for the address to be transmitted + uint8_t TXdata[1]; + // Shift the address and AND a 1 into the read write bit (set to write mode) + TXdata[0] = (TWIaddr << 1) | 0x01; + // Use the TWITransmitData function to initialize the transfer and address the slave + TWITransmitData(TXdata, 1, repStart); + } + else + { + return 0; + } + return 1; +} + +ISR (TWI_vect) +{ + switch (TWI_STATUS) + { + // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- // + case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received + // Set mode to Master Transmitter + TWIInfo.mode = MasterTransmitter; + case TWI_START_SENT: // Start condition has been transmitted + case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received + if (TXBuffIndex < TXBuffLen) // If there is more data to send + { + TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendTransmit(); // Send the data + } + // This transmission is complete however do not release bus yet + else if (TWIInfo.repStart) + { + TWIInfo.errorCode = 0xFF; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWISendStop(); + } + break; + + // ----\/ ---- MASTER RECEIVER ----\/ ---- // + + case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received + // Switch to Master Receiver mode + TWIInfo.mode = MasterReceiver; + // If there is more than one byte to be read, receive data byte and return an ACK + if (RXBuffIndex < RXBuffLen-1) + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendACK(); + } + // Otherwise when a data byte (the only data byte) is received, return NACK + else + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendNACK(); + } + break; + + case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted. + + /// -- HANDLE DATA BYTE --- /// + TWIReceiveBuffer[RXBuffIndex++] = TWDR; + // If there is more than one byte to be read, receive data byte and return an ACK + if (RXBuffIndex < RXBuffLen-1) + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendACK(); + } + // Otherwise when a data byte (the only data byte) is received, return NACK + else + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendNACK(); + } + break; + + case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission. + + /// -- HANDLE DATA BYTE --- /// + TWIReceiveBuffer[RXBuffIndex++] = TWDR; + // This transmission is complete however do not release bus yet + if (TWIInfo.repStart) + { + TWIInfo.errorCode = 0xFF; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWISendStop(); + } + break; + + // ----\/ ---- MT and MR common ----\/ ---- // + + case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received + case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received + case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received + case TWI_LOST_ARBIT: // Arbitration has been lost + // Return error and send stop and set mode to ready + if (TWIInfo.repStart) + { + TWIInfo.errorCode = TWI_STATUS; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = TWI_STATUS; + TWISendStop(); + } + break; + case TWI_REP_START_SENT: // Repeated start has been transmitted + // Set the mode but DO NOT clear TWINT as the next data is not yet ready + TWIInfo.mode = RepeatedStartSent; + break; + + // ----\/ ---- SLAVE RECEIVER ----\/ ---- // + + // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY + + // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- // + + // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY + + // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- // + case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition + // Rather, it is there to be manually set between operations + break; + case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error + TWIInfo.errorCode = TWI_ILLEGAL_START_STOP; + TWIInfo.mode = Ready; + TWISendStop(); + break; + } + +} diff --git a/drivers/avr/TWIlib.h b/drivers/avr/TWIlib.h new file mode 100644 index 000000000..23fd1f09a --- /dev/null +++ b/drivers/avr/TWIlib.h @@ -0,0 +1,82 @@ +/* + * TWIlib.h + * + * Created: 6/01/2014 10:38:42 PM + * Author: Chris Herring + * http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/ + */ + + +#ifndef TWILIB_H_ +#define TWILIB_H_ +// TWI bit rate (was 100000) +#define TWI_FREQ 400000 +// Get TWI status +#define TWI_STATUS (TWSR & 0xF8) +// Transmit buffer length +#define TXMAXBUFLEN 20 +// Receive buffer length +#define RXMAXBUFLEN 20 +// Global transmit buffer +uint8_t TWITransmitBuffer[TXMAXBUFLEN]; +// Global receive buffer +volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; +// Buffer indexes +volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. +int RXBuffIndex; // Current index in the receive buffer +// Buffer lengths +int TXBuffLen; // The total length of the transmit buffer +int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) + +typedef enum { + Ready, + Initializing, + RepeatedStartSent, + MasterTransmitter, + MasterReceiver, + SlaceTransmitter, + SlaveReciever + } TWIMode; + + typedef struct TWIInfoStruct{ + TWIMode mode; + uint8_t errorCode; + uint8_t repStart; + }TWIInfoStruct; +TWIInfoStruct TWIInfo; + + +// TWI Status Codes +#define TWI_START_SENT 0x08 // Start sent +#define TWI_REP_START_SENT 0x10 // Repeated Start sent +// Master Transmitter Mode +#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received +#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received +#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received +#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received +// Master Receiver Mode +#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received +#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received +#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned +#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned + +// Miscellaneous States +#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost +#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available +#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected +#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only + + +#define TWISendStart() (TWCR = (1<. + */ + +#include "is31fl3731.h" +#include +#include +#include +#include +#include "TWIlib.h" +#include "progmem.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define ISSI_ADDR_DEFAULT 0x74 + +#define ISSI_REG_CONFIG 0x00 +#define ISSI_REG_CONFIG_PICTUREMODE 0x00 +#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08 +#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18 + +#define ISSI_CONF_PICTUREMODE 0x00 +#define ISSI_CONF_AUTOFRAMEMODE 0x04 +#define ISSI_CONF_AUDIOMODE 0x08 + +#define ISSI_REG_PICTUREFRAME 0x01 + +#define ISSI_REG_SHUTDOWN 0x0A +#define ISSI_REG_AUDIOSYNC 0x06 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[TXMAXBUFLEN]; + +// These buffers match the IS31FL3731 PWM registers 0x24-0xB3. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][144]; +bool g_pwm_buffer_update_required = false; + +uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } }; +bool g_led_control_registers_update_required = false; + +// This is the bit pattern in the LED control registers +// (for matrix A, add one to register for matrix B) +// +// reg - b7 b6 b5 b4 b3 b2 b1 b0 +// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01 +// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00 +// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00 +// 0x06 - - , - , - , - , - ,B02,B01,B00 +// 0x08 - - , - , - , - , - , - , - , - +// 0x0A - B17,B16,B15, - , - , - , - , - +// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09 +// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09 +// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09 + + +void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data ) +{ + g_twi_transfer_buffer[0] = (addr << 1) | 0x00; + g_twi_transfer_buffer[1] = reg; + g_twi_transfer_buffer[2] = data; + + // Set the error code to have no relevant information + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + // Continuously attempt to transmit data until a successful transmission occurs + //while ( TWIInfo.errorCode != 0xFF ) + //{ + TWITransmitData( g_twi_transfer_buffer, 3, 0 ); + //} +} + +void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) +{ + // assumes bank is already selected + + // transmit PWM registers in 9 transfers of 16 bytes + // g_twi_transfer_buffer[] is 20 bytes + + // set the I2C address + g_twi_transfer_buffer[0] = (addr << 1) | 0x00; + + // iterate over the pwm_buffer contents at 16 byte intervals + for ( int i = 0; i < 144; i += 16 ) + { + // set the first register, e.g. 0x24, 0x34, 0x44, etc. + g_twi_transfer_buffer[1] = 0x24 + i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer + for ( int j = 0; j < 16; j++ ) + { + g_twi_transfer_buffer[2 + j] = pwm_buffer[i + j]; + } + + // Set the error code to have no relevant information + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + // Continuously attempt to transmit data until a successful transmission occurs + while ( TWIInfo.errorCode != 0xFF ) + { + TWITransmitData( g_twi_transfer_buffer, 16 + 2, 0 ); + } + } +} + +void IS31FL3731_init( uint8_t addr ) +{ + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, first enable software shutdown, + // then set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + // select "function register" bank + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); + + // enable software shutdown + IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 ); + // this delay was copied from other drivers, might not be needed + _delay_ms( 10 ); + + // picture mode + IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE ); + // display frame 0 + IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 ); + // audio sync off + IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 ); + + // select bank 0 + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 ); + + // turn off all LEDs in the LED control register + for ( int i = 0x00; i <= 0x11; i++ ) + { + IS31FL3731_write_register( addr, i, 0x00 ); + } + + // turn off all LEDs in the blink control register (not really needed) + for ( int i = 0x12; i <= 0x23; i++ ) + { + IS31FL3731_write_register( addr, i, 0x00 ); + } + + // set PWM on all LEDs to 0 + for ( int i = 0x24; i <= 0xB3; i++ ) + { + IS31FL3731_write_register( addr, i, 0x00 ); + } + + // select "function register" bank + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); + + // disable software shutdown + IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 ); + + // select bank 0 and leave it selected. + // most usage after initialization is just writing PWM buffers in bank 0 + // as there's not much point in double-buffering + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 ); +} + +void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + if ( index >= 0 && index < DRIVER_LED_TOTAL ) { + is31_led led = g_is31_leds[index]; + + // Subtract 0x24 to get the second index of g_pwm_buffer + g_pwm_buffer[led.driver][led.r - 0x24] = red; + g_pwm_buffer[led.driver][led.g - 0x24] = green; + g_pwm_buffer[led.driver][led.b - 0x24] = blue; + g_pwm_buffer_update_required = true; + } +} + +void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + for ( int i = 0; i < DRIVER_LED_TOTAL; i++ ) + { + IS31FL3731_set_color( i, red, green, blue ); + } +} + +void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) +{ + is31_led led = g_is31_leds[index]; + + uint8_t control_register_r = (led.r - 0x24) / 8; + uint8_t control_register_g = (led.g - 0x24) / 8; + uint8_t control_register_b = (led.b - 0x24) / 8; + uint8_t bit_r = (led.r - 0x24) % 8; + uint8_t bit_g = (led.g - 0x24) % 8; + uint8_t bit_b = (led.b - 0x24) % 8; + + if ( red ) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if ( green ) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if ( blue ) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required = true; + + +} + +void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_pwm_buffer_update_required ) + { + IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] ); + IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + } + g_pwm_buffer_update_required = false; +} + +void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_led_control_registers_update_required ) + { + for ( int i=0; i<18; i++ ) + { + IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] ); + IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] ); + } + } +} + diff --git a/drivers/avr/is31fl3731.h b/drivers/avr/is31fl3731.h new file mode 100644 index 000000000..3d30fc67b --- /dev/null +++ b/drivers/avr/is31fl3731.h @@ -0,0 +1,214 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#ifndef IS31FL3731_DRIVER_H +#define IS31FL3731_DRIVER_H + +#include +#include + +typedef struct is31_led { + uint8_t driver:2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) is31_led; + +extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3731_init( uint8_t addr ); +void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data ); +void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); + +void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); + +void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); + +#define C1_1 0x24 +#define C1_2 0x25 +#define C1_3 0x26 +#define C1_4 0x27 +#define C1_5 0x28 +#define C1_6 0x29 +#define C1_7 0x2A +#define C1_8 0x2B + +#define C1_9 0x2C +#define C1_10 0x2D +#define C1_11 0x2E +#define C1_12 0x2F +#define C1_13 0x30 +#define C1_14 0x31 +#define C1_15 0x32 +#define C1_16 0x33 + +#define C2_1 0x34 +#define C2_2 0x35 +#define C2_3 0x36 +#define C2_4 0x37 +#define C2_5 0x38 +#define C2_6 0x39 +#define C2_7 0x3A +#define C2_8 0x3B + +#define C2_9 0x3C +#define C2_10 0x3D +#define C2_11 0x3E +#define C2_12 0x3F +#define C2_13 0x40 +#define C2_14 0x41 +#define C2_15 0x42 +#define C2_16 0x43 + +#define C3_1 0x44 +#define C3_2 0x45 +#define C3_3 0x46 +#define C3_4 0x47 +#define C3_5 0x48 +#define C3_6 0x49 +#define C3_7 0x4A +#define C3_8 0x4B + +#define C3_9 0x4C +#define C3_10 0x4D +#define C3_11 0x4E +#define C3_12 0x4F +#define C3_13 0x50 +#define C3_14 0x51 +#define C3_15 0x52 +#define C3_16 0x53 + +#define C4_1 0x54 +#define C4_2 0x55 +#define C4_3 0x56 +#define C4_4 0x57 +#define C4_5 0x58 +#define C4_6 0x59 +#define C4_7 0x5A +#define C4_8 0x5B + +#define C4_9 0x5C +#define C4_10 0x5D +#define C4_11 0x5E +#define C4_12 0x5F +#define C4_13 0x60 +#define C4_14 0x61 +#define C4_15 0x62 +#define C4_16 0x63 + +#define C5_1 0x64 +#define C5_2 0x65 +#define C5_3 0x66 +#define C5_4 0x67 +#define C5_5 0x68 +#define C5_6 0x69 +#define C5_7 0x6A +#define C5_8 0x6B + +#define C5_9 0x6C +#define C5_10 0x6D +#define C5_11 0x6E +#define C5_12 0x6F +#define C5_13 0x70 +#define C5_14 0x71 +#define C5_15 0x72 +#define C5_16 0x73 + +#define C6_1 0x74 +#define C6_2 0x75 +#define C6_3 0x76 +#define C6_4 0x77 +#define C6_5 0x78 +#define C6_6 0x79 +#define C6_7 0x7A +#define C6_8 0x7B + +#define C6_9 0x7C +#define C6_10 0x7D +#define C6_11 0x7E +#define C6_12 0x7F +#define C6_13 0x80 +#define C6_14 0x81 +#define C6_15 0x82 +#define C6_16 0x83 + +#define C7_1 0x84 +#define C7_2 0x85 +#define C7_3 0x86 +#define C7_4 0x87 +#define C7_5 0x88 +#define C7_6 0x89 +#define C7_7 0x8A +#define C7_8 0x8B + +#define C7_9 0x8C +#define C7_10 0x8D +#define C7_11 0x8E +#define C7_12 0x8F +#define C7_13 0x90 +#define C7_14 0x91 +#define C7_15 0x92 +#define C7_16 0x93 + +#define C8_1 0x94 +#define C8_2 0x95 +#define C8_3 0x96 +#define C8_4 0x97 +#define C8_5 0x98 +#define C8_6 0x99 +#define C8_7 0x9A +#define C8_8 0x9B + +#define C8_9 0x9C +#define C8_10 0x9D +#define C8_11 0x9E +#define C8_12 0x9F +#define C8_13 0xA0 +#define C8_14 0xA1 +#define C8_15 0xA2 +#define C8_16 0xA3 + +#define C9_1 0xA4 +#define C9_2 0xA5 +#define C9_3 0xA6 +#define C9_4 0xA7 +#define C9_5 0xA8 +#define C9_6 0xA9 +#define C9_7 0xAA +#define C9_8 0xAB + +#define C9_9 0xAC +#define C9_10 0xAD +#define C9_11 0xAE +#define C9_12 0xAF +#define C9_13 0xB0 +#define C9_14 0xB1 +#define C9_15 0xB2 +#define C9_16 0xB3 + + + +#endif // IS31FL3731_DRIVER_H diff --git a/keyboards/planck/light/config.h b/keyboards/planck/light/config.h index 71c924904..17c015ed0 100644 --- a/keyboards/planck/light/config.h +++ b/keyboards/planck/light/config.h @@ -24,5 +24,22 @@ #define NO_USB_STARTUP_CHECK +#define PLANCK_MIT_LAYOUT -#endif \ No newline at end of file +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 25 +#define DRIVER_2_LED_TOTAL 24 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL + + +#endif diff --git a/keyboards/planck/light/light.c b/keyboards/planck/light/light.c index 96261616c..cef57c5e6 100644 --- a/keyboards/planck/light/light.c +++ b/keyboards/planck/light/light.c @@ -1,5 +1,4 @@ -/* Copyright 2017 Jason Williams - * Copyright 2017 Jack Humbert +/* Copyright 2017 Jack Humbert * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,6 +16,127 @@ #include "light.h" +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3}, + {0, C1_4, C2_4, C3_4}, + {0, C1_5, C2_5, C3_5}, + {0, C1_11, C2_11, C3_11}, + {0, C1_12, C2_12, C3_12}, + {0, C1_13, C2_13, C3_13}, + {1, C1_3, C2_3, C3_3}, + {1, C1_4, C2_4, C3_4}, + {1, C1_5, C2_5, C3_5}, + {1, C1_11, C2_11, C3_11}, + {1, C1_12, C2_12, C3_12}, + {1, C1_13, C2_13, C3_13}, + + {0, C1_6, C2_6, C3_6}, + {0, C1_7, C2_7, C3_7}, + {0, C1_8, C2_8, C3_8}, + {0, C1_14, C2_14, C3_14}, + {0, C1_15, C2_15, C3_15}, + {0, C1_16, C2_16, C3_16}, + {1, C1_6, C2_6, C3_6}, + {1, C1_7, C2_7, C3_7}, + {1, C1_8, C2_8, C3_8}, + {1, C1_14, C2_14, C3_14}, + {1, C1_15, C2_15, C3_15}, + {1, C1_16, C2_16, C3_16}, + + {0, C9_1, C8_1, C7_1}, + {0, C9_2, C8_2, C7_2}, + {0, C9_3, C8_3, C7_3}, + {0, C9_9, C8_9, C7_9}, + {0, C9_10, C8_10, C7_10}, + {0, C9_11, C8_11, C7_11}, + {1, C9_1, C8_1, C7_1}, + {1, C9_2, C8_2, C7_2}, + {1, C9_3, C8_3, C7_3}, + {1, C9_9, C8_9, C7_9}, + {1, C9_10, C8_10, C7_10}, + {1, C9_11, C8_11, C7_11}, + + {0, C9_4, C8_4, C7_4}, + {0, C9_5, C8_5, C7_5}, + {0, C9_6, C8_6, C7_6}, + {0, C9_12, C8_12, C7_12}, + {0, C9_13, C8_13, C7_13}, + {0, C9_14, C8_14, C7_14}, + {0, C9_15, C8_15, C6_14}, // middle 2u switch + {1, C9_4, C8_4, C7_4}, + {1, C9_5, C8_5, C7_5}, + {1, C9_6, C8_6, C7_6}, + {1, C9_12, C8_12, C7_12}, + {1, C9_13, C8_13, C7_13}, + {1, C9_14, C8_14, C7_14} +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + /*{row | col << 4} + | {x=0..224, y=0..64} + | | modifier + | | | */ + {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, + {{0|(1<<4)}, {20.36*1, 21.33*0}, 0}, + {{0|(2<<4)}, {20.36*2, 21.33*0}, 0}, + {{0|(3<<4)}, {20.36*3, 21.33*0}, 0}, + {{0|(4<<4)}, {20.36*4, 21.33*0}, 0}, + {{0|(5<<4)}, {20.36*5, 21.33*0}, 0}, + {{0|(6<<4)}, {20.36*6, 21.33*0}, 0}, + {{0|(7<<4)}, {20.36*7, 21.33*0}, 0}, + {{0|(8<<4)}, {20.36*8, 21.33*0}, 0}, + {{0|(9<<4)}, {20.36*9, 21.33*0}, 0}, + {{0|(10<<4)}, {20.36*10,21.33*0}, 0}, + {{0|(11<<4)}, {20.36*11,21.33*0}, 1}, + + {{1|(0<<4)}, {20.36*0, 21.33*1}, 1}, + {{1|(1<<4)}, {20.36*1, 21.33*1}, 0}, + {{1|(2<<4)}, {20.36*2, 21.33*1}, 0}, + {{1|(3<<4)}, {20.36*3, 21.33*1}, 0}, + {{1|(4<<4)}, {20.36*4, 21.33*1}, 0}, + {{1|(5<<4)}, {20.36*5, 21.33*1}, 0}, + {{1|(6<<4)}, {20.36*6, 21.33*1}, 0}, + {{1|(7<<4)}, {20.36*7, 21.33*1}, 0}, + {{1|(8<<4)}, {20.36*8, 21.33*1}, 0}, + {{1|(9<<4)}, {20.36*9, 21.33*1}, 0}, + {{1|(10<<4)}, {20.36*10,21.33*1}, 0}, + {{1|(11<<4)}, {20.36*11,21.33*1}, 1}, + + {{2|(0<<4)}, {20.36*0, 21.33*2}, 1}, + {{2|(1<<4)}, {20.36*1, 21.33*2}, 0}, + {{2|(2<<4)}, {20.36*2, 21.33*2}, 0}, + {{2|(3<<4)}, {20.36*3, 21.33*2}, 0}, + {{2|(4<<4)}, {20.36*4, 21.33*2}, 0}, + {{2|(5<<4)}, {20.36*5, 21.33*2}, 0}, + {{2|(6<<4)}, {20.36*6, 21.33*2}, 0}, + {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, + {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, + {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, + {{2|(10<<4)}, {20.36*10,21.33*2}, 0}, + {{2|(11<<4)}, {20.36*11,21.33*2}, 1}, + + {{3|(0<<4)}, {20.36*0, 21.33*3}, 1}, + {{3|(1<<4)}, {20.36*1, 21.33*3}, 1}, + {{3|(2<<4)}, {20.36*2, 21.33*3}, 1}, + {{3|(3<<4)}, {20.36*3, 21.33*3}, 1}, + {{3|(4<<4)}, {20.36*4, 21.33*3}, 1}, + {{3|(5<<4)}, {20.36*5, 21.33*3}, 0}, + {{3|(5<<4)}, {20.36*5.5,21.33*3}, 0}, + {{3|(6<<4)}, {20.36*6, 21.33*3}, 0}, + {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, + {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, + {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(10<<4)}, {20.36*10,21.33*3}, 1}, + {{3|(11<<4)}, {20.36*11,21.33*3}, 1} +}; + void matrix_init_kb(void) { // Turn status LED on @@ -27,13 +147,22 @@ void matrix_init_kb(void) { } bool process_record_kb(uint16_t keycode, keyrecord_t *record) -{ +{ return process_record_user(keycode, record); } -uint16_t backlight_task_counter = 0; - void matrix_scan_kb(void) { matrix_scan_user(); -} \ No newline at end of file +} + +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +} + diff --git a/keyboards/planck/light/light.h b/keyboards/planck/light/light.h index 111f19865..a395f30e8 100644 --- a/keyboards/planck/light/light.h +++ b/keyboards/planck/light/light.h @@ -1,5 +1,4 @@ -/* Copyright 2017 Jason Williams - * Copyright 2017 Jack Humbert +/* Copyright 2017 Jack Humbert * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,5 +18,6 @@ #define LIGHT_H #include "planck.h" +#include "rgb_matrix.h" #endif \ No newline at end of file diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index 3d7006b52..c10b8fd1d 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -1,7 +1,5 @@ MIDI_ENABLE = yes AUDIO_ENABLE = yes # Audio output on port C6 -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGB_MATRIX_ENABLE = yes MCU = at90usb1286 \ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 511c06d70..e194dcd51 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -48,7 +48,7 @@ ifeq ($(strip $(KEYBOARD)), planck/rev5) BOOTLOADER = qmk-dfu endif ifeq ($(strip $(KEYBOARD)), planck/light) - BOOTLOADER = qmk-dfu + BOOTLOADER = atmel-dfu endif # Interrupt driven control endpoint task(+60) diff --git a/quantum/color.c b/quantum/color.c new file mode 100644 index 000000000..8ede053e7 --- /dev/null +++ b/quantum/color.c @@ -0,0 +1,87 @@ +/* Copyright 2017 Jason Williams + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#include "color.h" +#include "led_tables.h" +#include "progmem.h" + +RGB hsv_to_rgb( HSV hsv ) +{ + RGB rgb; + uint8_t region, p, q, t; + uint16_t h, s, v, remainder; + + if ( hsv.s == 0 ) + { + rgb.r = hsv.v; + rgb.g = hsv.v; + rgb.b = hsv.v; + return rgb; + } + + h = hsv.h; + s = hsv.s; + v = hsv.v; + + region = h / 43; + remainder = (h - (region * 43)) * 6; + + p = (v * (255 - s)) >> 8; + q = (v * (255 - ((s * remainder) >> 8))) >> 8; + t = (v * (255 - ((s * (255 - remainder)) >> 8))) >> 8; + + switch ( region ) + { + case 0: + rgb.r = v; + rgb.g = t; + rgb.b = p; + break; + case 1: + rgb.r = q; + rgb.g = v; + rgb.b = p; + break; + case 2: + rgb.r = p; + rgb.g = v; + rgb.b = t; + break; + case 3: + rgb.r = p; + rgb.g = q; + rgb.b = v; + break; + case 4: + rgb.r = t; + rgb.g = p; + rgb.b = v; + break; + default: + rgb.r = v; + rgb.g = p; + rgb.b = q; + break; + } + + rgb.r = pgm_read_byte( &CIE1931_CURVE[rgb.r] ); + rgb.g = pgm_read_byte( &CIE1931_CURVE[rgb.g] ); + rgb.b = pgm_read_byte( &CIE1931_CURVE[rgb.b] ); + + return rgb; +} + diff --git a/quantum/color.h b/quantum/color.h new file mode 100644 index 000000000..9d51d45ad --- /dev/null +++ b/quantum/color.h @@ -0,0 +1,55 @@ +/* Copyright 2017 Jason Williams + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#ifndef COLOR_H +#define COLOR_H + +#include +#include + + +#if defined(__GNUC__) +#define PACKED __attribute__ ((__packed__)) +#else +#define PACKED +#endif + +#if defined(_MSC_VER) +#pragma pack( push, 1 ) +#endif + +typedef struct PACKED +{ + uint8_t r; + uint8_t g; + uint8_t b; +} RGB; + +typedef struct PACKED +{ + uint8_t h; + uint8_t s; + uint8_t v; +} HSV; + +#if defined(_MSC_VER) +#pragma pack( pop ) +#endif + +RGB hsv_to_rgb( HSV hsv ); + +#endif // COLOR_H diff --git a/quantum/quantum.c b/quantum/quantum.c index 2662e5ef1..e1bc8b242 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -230,6 +230,9 @@ bool process_record_quantum(keyrecord_t *record) { process_clicky(keycode, record) && #endif //AUDIO_CLICKY process_record_kb(keycode, record) && + #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES) + process_rgb_matrix(keycode, record) && + #endif #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) process_midi(keycode, record) && #endif @@ -307,7 +310,7 @@ bool process_record_quantum(keyrecord_t *record) { } return false; #endif - #ifdef RGBLIGHT_ENABLE + #if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) case RGB_TOG: if (record->event.pressed) { rgblight_toggle(); @@ -835,9 +838,18 @@ void matrix_init_quantum() { #ifdef AUDIO_ENABLE audio_init(); #endif + #ifdef RGB_MATRIX_ENABLE + rgb_matrix_init_drivers(); + #endif matrix_init_kb(); } +uint8_t rgb_matrix_task_counter = 0; + +#ifndef RGB_MATRIX_SKIP_FRAMES + #define RGB_MATRIX_SKIP_FRAMES 1 +#endif + void matrix_scan_quantum() { #if defined(AUDIO_ENABLE) matrix_scan_music(); @@ -855,9 +867,16 @@ void matrix_scan_quantum() { backlight_task(); #endif + #ifdef RGB_MATRIX_ENABLE + rgb_matrix_task(); + if (rgb_matrix_task_counter == 0) { + rgb_matrix_update_pwm_buffers(); + } + rgb_matrix_task_counter = ((rgb_matrix_task_counter + 1) % (RGB_MATRIX_SKIP_FRAMES + 1)); + #endif + matrix_scan_kb(); } - #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) static const uint8_t backlight_pin = BACKLIGHT_PIN; diff --git a/quantum/quantum.h b/quantum/quantum.h index 195f578de..2958a0abd 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -27,9 +27,15 @@ #ifdef BACKLIGHT_ENABLE #include "backlight.h" #endif +#if !defined(RGBLIGHT_ENABLE) && !defined(RGB_MATRIX_ENABLE) + #include "rgb.h" +#endif #ifdef RGBLIGHT_ENABLE #include "rgblight.h" #endif +#ifdef RGB_MATRIX_ENABLE + #include "rgb_matrix.h" +#endif #include "action_layer.h" #include "eeconfig.h" #include diff --git a/quantum/rgb.h b/quantum/rgb.h new file mode 100644 index 000000000..fbdda293f --- /dev/null +++ b/quantum/rgb.h @@ -0,0 +1,47 @@ +/* Copyright 2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef RGB_H +#define RGB_H + +__attribute__((weak)) +void rgblight_toggle(void) {}; + +__attribute__((weak)) +void rgblight_step(void) {}; + +__attribute__((weak)) +void rgblight_step_reverse(void) {}; + +__attribute__((weak)) +void rgblight_increase_hue(void) {}; + +__attribute__((weak)) +void rgblight_decrease_hue(void) {}; + +__attribute__((weak)) +void rgblight_increase_sat(void) {}; + +__attribute__((weak)) +void rgblight_decrease_sat(void) {}; + +__attribute__((weak)) +void rgblight_increase_val(void) {}; + +__attribute__((weak)) +void rgblight_decrease_val(void) {}; + +#endif \ No newline at end of file diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c new file mode 100644 index 000000000..6cb0478f7 --- /dev/null +++ b/quantum/rgb_matrix.c @@ -0,0 +1,873 @@ +/* Copyright 2017 Jason Williams + * Copyright 2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#include "rgb_matrix.h" +#include +#include "TWIlib.h" +#include +#include +#include "progmem.h" +#include "config.h" +#include "eeprom.h" +#include "lufa.h" +#include + +rgb_config_t rgb_matrix_config; + +#ifndef RGB_DISABLE_AFTER_TIMEOUT + #define RGB_DISABLE_AFTER_TIMEOUT 0 +#endif + +#ifndef RGB_DISABLE_WHEN_USB_SUSPENDED + #define RGB_DISABLE_WHEN_USB_SUSPENDED false +#endif + +#ifndef EECONFIG_RGB_MATRIX + #define EECONFIG_RGB_MATRIX EECONFIG_RGBLIGHT +#endif + +bool g_suspend_state = false; + +// Global tick at 20 Hz +uint32_t g_tick = 0; + +// Ticks since this key was last hit. +uint8_t g_key_hit[DRIVER_LED_TOTAL]; + +// Ticks since any key was last hit. +uint32_t g_any_key_hit = 0; + +#ifndef PI +#define PI 3.14159265 +#endif + +uint32_t eeconfig_read_rgb_matrix(void) { + return eeprom_read_dword(EECONFIG_RGB_MATRIX); +} +void eeconfig_update_rgb_matrix(uint32_t val) { + eeprom_update_dword(EECONFIG_RGB_MATRIX, val); +} +void eeconfig_update_rgb_matrix_default(void) { + dprintf("eeconfig_update_rgb_matrix_default\n"); + rgb_matrix_config.enable = 1; + rgb_matrix_config.mode = RGB_MATRIX_CYCLE_LEFT_RIGHT; + rgb_matrix_config.hue = 0; + rgb_matrix_config.sat = 255; + rgb_matrix_config.val = 255; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} +void eeconfig_debug_rgb_matrix(void) { + dprintf("rgb_matrix_config eprom\n"); + dprintf("rgb_matrix_config.enable = %d\n", rgb_matrix_config.enable); + dprintf("rgb_matrix_config.mode = %d\n", rgb_matrix_config.mode); + dprintf("rgb_matrix_config.hue = %d\n", rgb_matrix_config.hue); + dprintf("rgb_matrix_config.sat = %d\n", rgb_matrix_config.sat); + dprintf("rgb_matrix_config.val = %d\n", rgb_matrix_config.val); +} + +// Last led hit +#define LED_HITS_TO_REMEMBER 8 +uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255}; +uint8_t g_last_led_count = 0; + +void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t *led_count) { + rgb_led led; + *led_count = 0; + + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + // map_index_to_led(i, &led); + led = g_rgb_leds[i]; + if (row == led.matrix_co.row && column == led.matrix_co.col) { + led_i[*led_count] = i; + (*led_count)++; + } + } +} + + +void rgb_matrix_update_pwm_buffers(void) { + IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); + IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); +} + +void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { + IS31FL3731_set_color( index, red, green, blue ); +} + +void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { + IS31FL3731_set_color_all( red, green, blue ); +} + + +bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { + if ( record->event.pressed ) { + uint8_t led[8], led_count; + map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); + if (led_count > 0) { + for (uint8_t i = LED_HITS_TO_REMEMBER; i > 1; i--) { + g_last_led_hit[i - 1] = g_last_led_hit[i - 2]; + } + g_last_led_hit[0] = led[0]; + g_last_led_count = MIN(LED_HITS_TO_REMEMBER, g_last_led_count + 1); + } + for(uint8_t i = 0; i < led_count; i++) + g_key_hit[led[i]] = 0; + g_any_key_hit = 0; + } else { + #ifdef RGB_MATRIX_KEYRELEASES + uint8_t led[8], led_count; + map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); + for(uint8_t i = 0; i < led_count; i++) + g_key_hit[led[i]] = 255; + + g_any_key_hit = 255; + #endif + } + return true; +} + +void rgb_matrix_set_suspend_state(bool state) { + g_suspend_state = state; +} + +void rgb_matrix_test(void) { + // Mask out bits 4 and 5 + // This 2-bit value will stay the same for 16 ticks. + switch ( (g_tick & 0x30) >> 4 ) + { + case 0: + { + rgb_matrix_set_color_all( 20, 0, 0 ); + break; + } + case 1: + { + rgb_matrix_set_color_all( 0, 20, 0 ); + break; + } + case 2: + { + rgb_matrix_set_color_all( 0, 0, 20 ); + break; + } + case 3: + { + rgb_matrix_set_color_all( 20, 20, 20 ); + break; + } + } +} + +// This tests the LEDs +// Note that it will change the LED control registers +// in the LED drivers, and leave them in an invalid +// state for other backlight effects. +// ONLY USE THIS FOR TESTING LEDS! +void rgb_matrix_single_LED_test(void) { + static uint8_t color = 0; // 0,1,2 for R,G,B + static uint8_t row = 0; + static uint8_t column = 0; + + static uint8_t tick = 0; + tick++; + + if ( tick > 2 ) + { + tick = 0; + column++; + } + if ( column > MATRIX_COLS ) + { + column = 0; + row++; + } + if ( row > MATRIX_ROWS ) + { + row = 0; + color++; + } + if ( color > 2 ) + { + color = 0; + } + + uint8_t led[8], led_count; + map_row_column_to_led(row,column,led,&led_count); + for(uint8_t i = 0; i < led_count; i++) { + rgb_matrix_set_color_all( 40, 40, 40 ); + rgb_matrix_test_led( led[i], color==0, color==1, color==2 ); + } +} + +// All LEDs off +void rgb_matrix_all_off(void) { + rgb_matrix_set_color_all( 0, 0, 0 ); +} + +// Solid color +void rgb_matrix_solid_color(void) { + HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; + RGB rgb = hsv_to_rgb( hsv ); + rgb_matrix_set_color_all( rgb.r, rgb.g, rgb.b ); +} + +void rgb_matrix_solid_reactive(void) { + // Relies on hue being 8-bit and wrapping + for ( int i=0; i 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + // Divide delta by 4, this gives the delta per row + deltaH /= 4; + + int16_t s1 = rgb_matrix_config.sat; + int16_t s2 = rgb_matrix_config.hue; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv = { .h = 0, .s = 255, .v = rgb_matrix_config.val }; + RGB rgb; + Point point; + for ( int i=0; i>4); + // Relies on hue being 8-bit and wrapping + hsv.h = rgb_matrix_config.hue + ( deltaH * y ); + hsv.s = rgb_matrix_config.sat + ( deltaS * y ); + rgb = hsv_to_rgb( hsv ); + rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void rgb_matrix_raindrops(bool initialize) { + int16_t h1 = rgb_matrix_config.hue; + int16_t h2 = (rgb_matrix_config.hue + 180) % 360; + int16_t deltaH = h2 - h1; + deltaH /= 4; + + // Take the shortest path between hues + if ( deltaH > 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + + int16_t s1 = rgb_matrix_config.sat; + int16_t s2 = rgb_matrix_config.sat; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv; + RGB rgb; + + // Change one LED every tick + uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % DRIVER_LED_TOTAL : 255; + + for ( int i=0; i 0 && g_any_key_hit > RGB_DISABLE_AFTER_TIMEOUT * 60 * 20)); + uint8_t effect = suspend_backlight ? 0 : rgb_matrix_config.mode; + + // Keep track of the effect used last time, + // detect change in effect, so each effect can + // have an optional initialization. + static uint8_t effect_last = 255; + bool initialize = effect != effect_last; + effect_last = effect; + + // this gets ticked at 20 Hz. + // each effect can opt to do calculations + // and/or request PWM buffer updates. + switch ( effect ) { + case RGB_MATRIX_SOLID_COLOR: + rgb_matrix_solid_color(); + break; + case RGB_MATRIX_SOLID_REACTIVE: + rgb_matrix_solid_reactive(); + break; + case RGB_MATRIX_ALPHAS_MODS: + rgb_matrix_alphas_mods(); + break; + case RGB_MATRIX_DUAL_BEACON: + rgb_matrix_dual_beacon(); + break; + case RGB_MATRIX_GRADIENT_UP_DOWN: + rgb_matrix_gradient_up_down(); + break; + case RGB_MATRIX_RAINDROPS: + rgb_matrix_raindrops( initialize ); + break; + case RGB_MATRIX_CYCLE_ALL: + rgb_matrix_cycle_all(); + break; + case RGB_MATRIX_CYCLE_LEFT_RIGHT: + rgb_matrix_cycle_left_right(); + break; + case RGB_MATRIX_CYCLE_UP_DOWN: + rgb_matrix_cycle_up_down(); + break; + case RGB_MATRIX_RAINBOW_BEACON: + rgb_matrix_rainbow_beacon(); + break; + case RGB_MATRIX_RAINBOW_PINWHEELS: + rgb_matrix_rainbow_pinwheels(); + break; + case RGB_MATRIX_RAINBOW_MOVING_CHEVRON: + rgb_matrix_rainbow_moving_chevron(); + break; + case RGB_MATRIX_JELLYBEAN_RAINDROPS: + rgb_matrix_jellybean_raindrops( initialize ); + break; + #ifdef RGB_MATRIX_KEYPRESSES + case RGB_MATRIX_SPLASH: + rgb_matrix_splash(); + break; + case RGB_MATRIX_MULTISPLASH: + rgb_matrix_multisplash(); + break; + case RGB_MATRIX_SOLID_SPLASH: + rgb_matrix_solid_splash(); + break; + case RGB_MATRIX_SOLID_MULTISPLASH: + rgb_matrix_solid_multisplash(); + break; + #endif + default: + rgb_matrix_custom(); + break; + } + + if ( ! suspend_backlight ) { + rgb_matrix_indicators(); + } + +} + +void rgb_matrix_indicators(void) { + rgb_matrix_indicators_kb(); + rgb_matrix_indicators_user(); +} + +__attribute__((weak)) +void rgb_matrix_indicators_kb(void) {} + +__attribute__((weak)) +void rgb_matrix_indicators_user(void) {} + + +// void rgb_matrix_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) +// { +// if ( row >= MATRIX_ROWS ) +// { +// // Special value, 255=none, 254=all +// *index = row; +// } +// else +// { +// // This needs updated to something like +// // uint8_t led[8], led_count; +// // map_row_column_to_led(row,column,led,&led_count); +// // for(uint8_t i = 0; i < led_count; i++) +// map_row_column_to_led( row, column, index ); +// } +// } + +void rgb_matrix_init_drivers(void) { + //sei(); + + // Initialize TWI + TWIInit(); + IS31FL3731_init( DRIVER_ADDR_1 ); + IS31FL3731_init( DRIVER_ADDR_2 ); + + for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) { + bool enabled = true; + // This only caches it for later + IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); + + // TODO: put the 1 second startup delay here? + + // clear the key hits + for ( int led=0; ledh = eeprom_read_byte(address); +// hsv->s = eeprom_read_byte(address+1); +// hsv->v = eeprom_read_byte(address+2); +// } + +// void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ) +// { +// uint8_t led[8], led_count; +// map_row_column_to_led(row,column,led,&led_count); +// for(uint8_t i = 0; i < led_count; i++) { +// if ( led[i] < DRIVER_LED_TOTAL ) +// { +// void *address = backlight_get_custom_key_color_eeprom_address(led[i]); +// eeprom_update_byte(address, hsv.h); +// eeprom_update_byte(address+1, hsv.s); +// eeprom_update_byte(address+2, hsv.v); +// } +// } +// } + +void rgb_matrix_test_led( uint8_t index, bool red, bool green, bool blue ) { + for ( int i=0; i= RGB_MATRIX_EFFECT_MAX) + rgb_matrix_config.mode = 1; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_step_reverse(void) { + rgb_matrix_config.mode--; + if (rgb_matrix_config.mode <= 1) + rgb_matrix_config.mode = (RGB_MATRIX_EFFECT_MAX - 1); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_increase_hue(void) { + rgb_matrix_config.hue = increment( rgb_matrix_config.hue, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_decrease_hue(void) { + rgb_matrix_config.hue = decrement( rgb_matrix_config.hue, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_increase_sat(void) { + rgb_matrix_config.sat = increment( rgb_matrix_config.sat, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_decrease_sat(void) { + rgb_matrix_config.sat = decrement( rgb_matrix_config.sat, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_increase_val(void) { + rgb_matrix_config.val = increment( rgb_matrix_config.val, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_decrease_val(void) { + rgb_matrix_config.val = decrement( rgb_matrix_config.val, 8, 0, 255 ); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +void rgblight_mode(uint8_t mode) { + rgb_matrix_config.mode = mode; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); +} + +uint32_t rgblight_get_mode(void) { + return rgb_matrix_config.mode; +} diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h new file mode 100644 index 000000000..ef93c6d5c --- /dev/null +++ b/quantum/rgb_matrix.h @@ -0,0 +1,135 @@ +/* Copyright 2017 Jason Williams + * Copyright 2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef RGB_MATRIX_H +#define RGB_MATRIX_H + +#include +#include +#include "color.h" +#include "is31fl3731.h" +#include "quantum.h" + +typedef struct Point { + uint8_t x; + uint8_t y; +} __attribute__((packed)) Point; + +typedef struct rgb_led { + union { + uint8_t raw; + struct { + uint8_t row:4; // 16 max + uint8_t col:4; // 16 max + }; + } matrix_co; + Point point; + uint8_t modifier:1; +} __attribute__((packed)) rgb_led; + + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; + +typedef struct +{ + HSV color; + uint8_t index; +} rgb_indicator; + +typedef union { + uint32_t raw; + struct { + bool enable :1; + uint8_t mode :6; + uint16_t hue :9; + uint8_t sat :8; + uint8_t val :8; + }; +} rgb_config_t; + +enum rgb_matrix_effects { + RGB_MATRIX_SOLID_COLOR = 1, + RGB_MATRIX_SOLID_REACTIVE, + RGB_MATRIX_ALPHAS_MODS, + RGB_MATRIX_DUAL_BEACON, + RGB_MATRIX_GRADIENT_UP_DOWN, + RGB_MATRIX_RAINDROPS, + RGB_MATRIX_CYCLE_ALL, + RGB_MATRIX_CYCLE_LEFT_RIGHT, + RGB_MATRIX_CYCLE_UP_DOWN, + RGB_MATRIX_RAINBOW_BEACON, + RGB_MATRIX_RAINBOW_PINWHEELS, + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, + RGB_MATRIX_JELLYBEAN_RAINDROPS, +#ifdef RGB_MATRIX_KEYPRESSES + RGB_MATRIX_SPLASH, + RGB_MATRIX_MULTISPLASH, + RGB_MATRIX_SOLID_SPLASH, + RGB_MATRIX_SOLID_MULTISPLASH, +#endif + RGB_MATRIX_EFFECT_MAX +}; + +void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); + +// This runs after another backlight effect and replaces +// colors already set +void rgb_matrix_indicators(void); +void rgb_matrix_indicators_kb(void); +void rgb_matrix_indicators_user(void); + +void rgb_matrix_single_LED_test(void); + +void rgb_matrix_init_drivers(void); + +void rgb_matrix_set_suspend_state(bool state); +void rgb_matrix_set_indicator_state(uint8_t state); + + +void rgb_matrix_task(void); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void rgb_matrix_update_pwm_buffers(void); + +bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record); + +void rgb_matrix_increase(void); +void rgb_matrix_decrease(void); + +// void *backlight_get_key_color_eeprom_address(uint8_t led); +// void backlight_get_key_color( uint8_t led, HSV *hsv ); +// void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ); + +void rgb_matrix_test_led( uint8_t index, bool red, bool green, bool blue ); +uint32_t rgb_matrix_get_tick(void); + +void rgblight_toggle(void); +void rgblight_step(void); +void rgblight_step_reverse(void); +void rgblight_increase_hue(void); +void rgblight_decrease_hue(void); +void rgblight_increase_sat(void); +void rgblight_decrease_sat(void); +void rgblight_increase_val(void); +void rgblight_decrease_val(void); +void rgblight_mode(uint8_t mode); +uint32_t rgblight_get_mode(void); + +#endif -- cgit v1.2.3-24-g4f1b