From dd3803f334eced4feaf3d25ff7cff9303d9a26f2 Mon Sep 17 00:00:00 2001 From: Zeal Jagannatha Date: Tue, 1 Aug 2017 13:36:44 -0700 Subject: Normalize all line endings --- keyboards/deltasplit75/i2c.c | 324 ++++++------ keyboards/deltasplit75/i2c.h | 62 +-- keyboards/deltasplit75/keymaps/default/config.h | 62 +-- keyboards/deltasplit75/matrix.c | 636 ++++++++++++------------ keyboards/deltasplit75/serial.c | 456 ++++++++--------- keyboards/deltasplit75/serial.h | 52 +- keyboards/deltasplit75/split_util.c | 162 +++--- keyboards/deltasplit75/split_util.h | 44 +- 8 files changed, 899 insertions(+), 899 deletions(-) diff --git a/keyboards/deltasplit75/i2c.c b/keyboards/deltasplit75/i2c.c index af806c75b..084c890c4 100644 --- a/keyboards/deltasplit75/i2c.c +++ b/keyboards/deltasplit75/i2c.c @@ -1,162 +1,162 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 100000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - -#endif +#ifndef I2C_H +#define I2C_H + +#include + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + +#endif diff --git a/keyboards/deltasplit75/keymaps/default/config.h b/keyboards/deltasplit75/keymaps/default/config.h index c72c00e68..4fb2554e0 100644 --- a/keyboards/deltasplit75/keymaps/default/config.h +++ b/keyboards/deltasplit75/keymaps/default/config.h @@ -1,31 +1,31 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - - -#define USE_SERIAL - -#define MASTER_LEFT -// #define _MASTER_RIGHT -// #define EE_HANDS - - -#ifdef SUBPROJECT_v2 - #include "../../v2/config.h" -#endif -#ifdef SUBPROJECT_protosplit - #include "../../protosplit/config.h" -#endif +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_v2 + #include "../../v2/config.h" +#endif +#ifdef SUBPROJECT_protosplit + #include "../../protosplit/config.h" +#endif diff --git a/keyboards/deltasplit75/matrix.c b/keyboards/deltasplit75/matrix.c index c3bb0b058..138969004 100644 --- a/keyboards/deltasplit75/matrix.c +++ b/keyboards/deltasplit75/matrix.c @@ -1,318 +1,318 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - - matrix_scan_quantum(); - - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + + matrix_scan_quantum(); + + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/deltasplit75/serial.c b/keyboards/deltasplit75/serial.c index 898ef7d42..6faed09ce 100644 --- a/keyboards/deltasplit75/serial.c +++ b/keyboards/deltasplit75/serial.c @@ -1,228 +1,228 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifdef USE_SERIAL - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include "serial.h" + +#ifdef USE_SERIAL + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/deltasplit75/serial.h b/keyboards/deltasplit75/serial.h index ab2ea0a09..6ef52019a 100644 --- a/keyboards/deltasplit75/serial.h +++ b/keyboards/deltasplit75/serial.h @@ -1,26 +1,26 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_COLS+7)/8 *MATRIX_ROWS/2) -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_COLS+7)/8 *MATRIX_ROWS/2) +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/deltasplit75/split_util.c b/keyboards/deltasplit75/split_util.c index a636f60db..226dc1881 100644 --- a/keyboards/deltasplit75/split_util.c +++ b/keyboards/deltasplit75/split_util.c @@ -1,81 +1,81 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< - -#ifdef EE_HANDS - #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 - #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END -#endif - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -#endif +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +#endif -- cgit v1.2.3-24-g4f1b From 23549791ebe632d1f6dded86c4c61d36f8db878a Mon Sep 17 00:00:00 2001 From: xk Date: Mon, 31 Jul 2017 13:11:28 -0600 Subject: Add keymap xk --- keyboards/lets_split/keymaps/xk/Makefile | 19 ++ keyboards/lets_split/keymaps/xk/config.h | 47 ++++ keyboards/lets_split/keymaps/xk/keymap.c | 353 +++++++++++++++++++++++++++++++ 3 files changed, 419 insertions(+) create mode 100644 keyboards/lets_split/keymaps/xk/Makefile create mode 100644 keyboards/lets_split/keymaps/xk/config.h create mode 100755 keyboards/lets_split/keymaps/xk/keymap.c diff --git a/keyboards/lets_split/keymaps/xk/Makefile b/keyboards/lets_split/keymaps/xk/Makefile new file mode 100644 index 000000000..46eb7989d --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/Makefile @@ -0,0 +1,19 @@ +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +USE_I2C = yes +TAP_DANCE_ENABLE = yes + +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/keymaps/xk/config.h b/keyboards/lets_split/keymaps/xk/config.h new file mode 100644 index 000000000..d37985043 --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/config.h @@ -0,0 +1,47 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define TAPPING_TOGGLE 1 +#define TAPPING_TERM 200 +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_LAYER_TOGGLE 2 +#define ONESHOT_TIMEOUT 300 + +/* Use I2C or Serial, not both */ + +// #define USE_SERIAL +#define USE_I2C + +#define MOUSEKEY_INTERVAL 50 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 + +#define MOUSEKEY_WHEEL_DELAY 0 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 + +// #define MASTER_LEFT +// #define _MASTER_RIGHT +#define EE_HANDS + + +#define PREVENT_STUCK_MODIFIERS +//#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD + +#endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/xk/keymap.c b/keyboards/lets_split/keymaps/xk/keymap.c new file mode 100755 index 000000000..4d89a67f7 --- /dev/null +++ b/keyboards/lets_split/keymaps/xk/keymap.c @@ -0,0 +1,353 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _COLEMAK 0 +#define _KAMELOC 1 +#define _IKAPILA 2 +#define _IKASHFT 3 +#define _ARROWKY 4 +#define _FNCTION 5 +#define _NINEKEY 6 +#define _NAVIGAT 7 +#define _QWERTY 8 +#define _GRVTABL 15 + +enum custom_keycodes { + COLEMAK = SAFE_RANGE, + KAMELOC, + IKAPILA, + IKASHFT, + ARROWKY, + FNCTION, + NINEKEY, + NAVIGAT, + QWERTY, + GRVTABL, +}; + +//TD Declarations +enum { + VOM = 0, + PRN, + EGT, + HRD, + DSH, + QUT, + ESC, + EQE, + PGN, + UND, + BSDEL, + bsdel_mods, + BOOTME, +}; + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// action-TAP for key/mod behavior LT(layer, kc) +#define XK_TAB LT(_FNCTION, KC_TAB) +#define XK_BSP LT(_KAMELOC, M(3)) + +#define XK_HARD LT(_FNCTION, M(1)) +#define XK_SPC LT(_IKAPILA, KC_SPC) +#define XK_ENT LT(_IKAPILA, KC_ENT) +#define XK_PGDN LT(_NAVIGAT, TD(PGN)) +#define XK_PREN LT(_IKASHFT, M(0)) +#define PIPBOY LT(_FNCTION, KC_BSLS) + +#define XK_DEL LT(_KAMELOC, KC_DEL) +#define XK_GRV LT(_GRVTABL, KC_GRV) + +// mod-TAP for mod/key behavior MT(modkey, kc) +#define ESC_IT MT(MOD_MEH, TD(ESC)) + +#define ALT_IT MT(MOD_LALT, KC_SCLN) +#define CTL_IT MT(MOD_LCTL, KC_SLSH) +#define XK_EGPT MT((MOD_LCTL | MOD_LALT | MOD_LGUI), M(2)) + +#define SFT_IT MT(MOD_RSFT, TG(_NAVIGAT)) +#define SFT_ENT MT(MOD_RSFT, KC_ENT) + +//sticky modifiers +#define KYCTL OSM(MOD_LCTL) +#define KYGUI OSM(MOD_LGUI) +#define KYSFT OSM(MOD_LSFT) +#define KYALT OSM(MOD_LALT) +#define CAKY OSM(MOD_LCTL | MOD_LALT) + +//shortcuts +#define CADEL LALT(LCTL(KC_DEL)) +#define CAINS LALT(LCTL(KC_INS)) +#define TGNKRO MAGIC_TOGGLE_NKRO + +#define NAVCH LCTL(KC_HOME) +#define NAVCPD LCTL(KC_PGDN) +#define NAVCPU LCTL(KC_PGUP) +#define NAVCE LCTL(KC_END) +#define NAVCU LCTL(KC_UP) +#define NAVCD LCTL(KC_DOWN) +#define NAVCL LCTL(KC_LEFT) +#define NAVCR LCTL(KC_RGHT) +#define NAVGU LGUI(KC_UP) +#define NAVGD LGUI(KC_DOWN) +#define NAVGL LGUI(KC_LEFT) +#define NAVGR LGUI(KC_RGHT) + +#define KC_NDSH LCTL(KC_PMNS) +#define KC_MDSH LALT(LCTL(KC_PMNS)) + +//!not sure if this old TMK code will work +//#define BOOTME ACTION_FUNCTION(BOOTLOADER) +#define LCLEAR ACTION_LAYER_SET_CLEAR(0) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* + TAP + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │TAB │ Q │ W │ F │ P │ B │ │ J │ L │ U │ Y │ ; │DEL │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │BKSP│ A │ R │ S │ T │ G │ │ M │ N │ E │ I │ O │ ' │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSFT│ X │ C │ D │ V │ Z │ │ K │ H │ , │ . │ / │LNAV│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OCTL│OALT│L9KY│ [] │OGUI│SPC │ │ENT │PGDN│ () │ {} │ \ │ ` │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + HOLD + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │L FN│ │ │ │ │ │ │ │ │ │ │ALT │L!@#│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │L OH│ │ │ │ │ │ │ │ │ │ │ │L OH│ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │SFT │ │ │ │ │ │ │ │ │ │ │CTL │SFT │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │CTL │ALT │L9KY│L!@#│GUI │L123│ │L123│LNAV│L!@#│MEH │L FN│LGRV│ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + DOUBLETAP + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │!F4 │ │ │ │ │ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSML│ │ │ │ │UNDO│ │ │ │ │ │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │OSML│OSML│ESC │ │OSML│ │ │ │PGUP│ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + Switch type + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │Br │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │Br │G │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │G │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │Z │Z │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │Y │Z │Z │Z │Z │Z │ │Z │Z │Z │Z │B │Y │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │Y │Y │C │Z │BLK │BLK │ │BLK │BLK │Z │Z │B │G │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +// Colemak PB&J (Mod-DH) +[_COLEMAK] = KEYMAP( \ + XK_TAB, TD(QUT), KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, ALT_IT, XK_GRV, \ + XK_BSP, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, XK_DEL, \ + KYSFT, KC_X, KC_C, KC_D, KC_V, TD(UND), KC_K, KC_H, KC_COMM, KC_DOT, CTL_IT, SFT_IT, \ + KYCTL, KYALT, ESC_IT, XK_HARD, KYGUI, XK_SPC, XK_ENT, XK_PGDN, XK_PREN, XK_EGPT, PIPBOY, XK_GRV \ +), + +// useful for one-handed typing +[_KAMELOC] = KEYMAP( \ + _______, KC_SCLN, KC_Y, KC_U, KC_L, KC_J, KC_B, KC_P, KC_F, KC_W, TD(QUT), _______, \ + _______, KC_O, KC_I, KC_E, KC_N, KC_M, KC_G, KC_T, KC_S, KC_R, KC_A, _______, \ + _______, KC_SLSH, KC_DOT, KC_COMM, KC_H, KC_K, TD(UND), KC_V, KC_D, KC_C, KC_X, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ ~ │ 1 │ 2 │ 3 │ 4 │ 5 │ │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │DASH│MV- │ V+ │NEXT│PLAY│ │ ← │ ↓ │ ↑ │ → │INS │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ - │ = │ [ │ ] │ \ │ │HOME│PGDN│PGUP│END │ \ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ +[_IKAPILA] = KEYMAP( \ + KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + _______, TD(DSH), TD(VOM), KC_VOLU, KC_MNXT, KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_INS, _______, \ + _______, KC_MINS, KC_EQL, TD(HRD), KC_RBRC, KC_BSLS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_BSLS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ ! │ @ │ # │ $ │ % │ │ ^ │ & │ * │ ( │ ) │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │DASH│MV- │ V+ │NEXT│PLAY│ │HOME│PGDN│PGUP│END │PSCR│ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ _ │ + │ { │ } │ | │ │ ← │ ↓ │ ↑ │ → │ │ │ + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ │ │ │ │ │ │ │ │ │ │ │ │ + └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ +*/ + +[_IKASHFT] = KEYMAP( \ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, TD(DSH), TD(VOM), KC_VOLU, KC_MNXT, KC_MPLY, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_PSCR, _______, \ + _______, KC_UNDS, KC_PLUS, TD(EGT), KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PAUS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* + ┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + │ │ → │ ↑ │ ← │ ↓ │ → │ │ → │ ↓ │ ← │ ↑ │ ↑ │ │ just in case someone hacks my IP with a 10MeG pipe, you know? + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + │ │ ← │ ↓ │ → │ ↑ │ ← │ │ ↑ │ ← │ ↓ │ → │ ← │ │ hacker_evasion layer + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ >>init network SEQUENCE + │ │ ↑ │ ← │ ↓ │ → │ ↑ │ │ ↓ │ ← │ ↑ │ → │ ← │ │ sleep 11; echo "DONE\n" + ├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ throttle INPUT 11001001 OUTPUT 010011001 ? FULL )); \ + │ │ │ │ → │ ← │ ↓ │ │ → │ ↑ │ ← │ ↓ │ ↑ │ │ <event.pressed) { + switch(id) { + case 0: + return MACRO(D(LSHIFT),T(9), T(0),U(LSHIFT), T(LEFT), END); + case 1: + return MACRO(T(LBRC), T(RBRC), T(LEFT), END); + case 2: + return MACRO(D(LSHIFT),T(LBRC), T(RBRC),U(LSHIFT), T(ENT), T(UP), END); + case 3: + return MACRO(T(BSPC), END); +/* static bool bsdel_mods = false; + case BSDEL: { + uint8_t kc = KC_BSPC; + if (record->event.pressed) { + if (keyboard_report->mods) { + kc = KC_DEL; + } + register_code (kc); + bsdel_mods = keyboard_report->mods; + } + else { + if (bsdel_mods) { + kc = KC_DEL; + } + + unregister_code (kc); + } + } +*/ case 4: + if (!record->event.pressed) { +// bootloader(); + } + } + } + return MACRO_NONE; +}; -- cgit v1.2.3-24-g4f1b From 8e66f65c77bf1414b3c2071f33ca1cc0770962c4 Mon Sep 17 00:00:00 2001 From: Balz Guenat Date: Wed, 2 Aug 2017 00:57:08 +0200 Subject: add my keymap --- keyboards/planck/keymaps/coloneljesus/Makefile | 3 + keyboards/planck/keymaps/coloneljesus/config.h | 42 ++++ keyboards/planck/keymaps/coloneljesus/keymap.c | 261 ++++++++++++++++++++++++ keyboards/planck/keymaps/coloneljesus/readme.md | 2 + 4 files changed, 308 insertions(+) create mode 100644 keyboards/planck/keymaps/coloneljesus/Makefile create mode 100644 keyboards/planck/keymaps/coloneljesus/config.h create mode 100644 keyboards/planck/keymaps/coloneljesus/keymap.c create mode 100644 keyboards/planck/keymaps/coloneljesus/readme.md diff --git a/keyboards/planck/keymaps/coloneljesus/Makefile b/keyboards/planck/keymaps/coloneljesus/Makefile new file mode 100644 index 000000000..457a3d01d --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/coloneljesus/config.h b/keyboards/planck/keymaps/coloneljesus/config.h new file mode 100644 index 000000000..b406e2fed --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/config.h @@ -0,0 +1,42 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/coloneljesus/keymap.c b/keyboards/planck/keymaps/coloneljesus/keymap.c new file mode 100644 index 000000000..5025256b7 --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/keymap.c @@ -0,0 +1,261 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "planck.h" +#include "action_layer.h" + +extern keymap_config_t keymap_config; + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt | App |Lower | Space |Raise | - | = | \ | Alt | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LGUI, KC_LALT, KC_APP, LOWER, KC_SPC, KC_SPC, RAISE, KC_MINS, KC_EQL, KC_BSLS, KC_RALT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | { | } | Del | Home | PgDn | PgUp | End | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Mute | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {_______, _______, _______, KC_LCBR, KC_RCBR, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, S(KC_NUHS), S(KC_NUBS), _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | [ | ] | Del | Left | Down | Up | Right| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Mute | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {_______, _______, _______, KC_LBRC, KC_RBRC, KC_DEL, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL }, + {_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} \ No newline at end of file diff --git a/keyboards/planck/keymaps/coloneljesus/readme.md b/keyboards/planck/keymaps/coloneljesus/readme.md new file mode 100644 index 000000000..31107f59c --- /dev/null +++ b/keyboards/planck/keymaps/coloneljesus/readme.md @@ -0,0 +1,2 @@ +# /u/Coloneljesus's Planck Layout + -- cgit v1.2.3-24-g4f1b From a7b6292010abe1f7990a04f94d5b58f7a76eaa57 Mon Sep 17 00:00:00 2001 From: Balz Guenat Date: Wed, 2 Aug 2017 02:37:28 +0200 Subject: added missing media controls and mod-tap rshift/enter --- keyboards/planck/keymaps/coloneljesus/keymap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/planck/keymaps/coloneljesus/keymap.c b/keyboards/planck/keymaps/coloneljesus/keymap.c index 5025256b7..668da5c10 100644 --- a/keyboards/planck/keymaps/coloneljesus/keymap.c +++ b/keyboards/planck/keymaps/coloneljesus/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = { {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_ENT) }, {KC_LCTL, KC_LGUI, KC_LALT, KC_APP, LOWER, KC_SPC, KC_SPC, RAISE, KC_MINS, KC_EQL, KC_BSLS, KC_RALT} }, @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {_______, _______, _______, KC_LCBR, KC_RCBR, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______}, - {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, S(KC_NUHS), S(KC_NUBS), _______, _______, _______}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, S(KC_NUHS), S(KC_NUBS), KC_MPRV, KC_MNXT, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -128,7 +128,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {_______, _______, _______, KC_LBRC, KC_RBRC, KC_DEL, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MPRV, KC_MNXT, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY} }, -- cgit v1.2.3-24-g4f1b From aab5f349a2ebba99ad2838a8e4b833bdaaf82e90 Mon Sep 17 00:00:00 2001 From: MechMerlin Date: Tue, 1 Aug 2017 09:32:49 -0700 Subject: New keymap for mechmerlin --- keyboards/kc60/keymaps/mechmerlin/keymap.c | 40 ++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 keyboards/kc60/keymaps/mechmerlin/keymap.c diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c new file mode 100644 index 000000000..7566586b9 --- /dev/null +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -0,0 +1,40 @@ +// This is the 60% layout preferred by u/merlin36 the host of the MechMerlin YouTube channel. +// The layout is highly influenced by the WKL B.Face and KBP V60 standard layouts. +// Layout designed for use on KC60 with no inswitch or underglow lighting. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(1), KC_RALT, KC_RGUI, KC_RCTL \ + ), + [1] = KEYMAP( /* FN Layer 1 */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_NO, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, TG(2), KC_NO, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + [2] = KEYMAP( /* Arrow Layers */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_UP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; -- cgit v1.2.3-24-g4f1b From 70cc193d14474a59f863b7278cf924ee159ed16d Mon Sep 17 00:00:00 2001 From: MechMerlin Date: Tue, 1 Aug 2017 11:23:46 -0700 Subject: Add a readme.md file for the keymap --- keyboards/kc60/keymaps/mechmerlin/readme.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 keyboards/kc60/keymaps/mechmerlin/readme.md diff --git a/keyboards/kc60/keymaps/mechmerlin/readme.md b/keyboards/kc60/keymaps/mechmerlin/readme.md new file mode 100644 index 000000000..6810c9620 --- /dev/null +++ b/keyboards/kc60/keymaps/mechmerlin/readme.md @@ -0,0 +1,14 @@ +MechMerlin's KC60 Layout +====================== + +This is the 60% layout used by MechMerlin. It has 3 layers, base QWERTY, FN 1, and an arrows only layer. + +## Keymap Notes +- Highly influenced by the KBP V60 and WKL B.Face standard layouts +- Does not support any form of inswitch or underglow lighting as Merlin hates them. +- Arrow toggle switch is FN + Space +- Rest is FN + R + + +### Build +To build this keymap, simply run `make KEYMAP=mechmerlin`. -- cgit v1.2.3-24-g4f1b From 29fcb64bb4f4b7cbb7033e1ce82da6072b7f3092 Mon Sep 17 00:00:00 2001 From: MechMerlin Date: Tue, 1 Aug 2017 11:39:47 -0700 Subject: add KC_Grave and fix typo on readme --- keyboards/kc60/keymaps/mechmerlin/keymap.c | 2 +- keyboards/kc60/keymaps/mechmerlin/readme.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c index 7566586b9..39ac8c45f 100644 --- a/keyboards/kc60/keymaps/mechmerlin/keymap.c +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -13,7 +13,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(1), KC_RALT, KC_RGUI, KC_RCTL \ ), [1] = KEYMAP( /* FN Layer 1 */ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_NO, KC_PGUP, \ diff --git a/keyboards/kc60/keymaps/mechmerlin/readme.md b/keyboards/kc60/keymaps/mechmerlin/readme.md index 6810c9620..10fb927ae 100644 --- a/keyboards/kc60/keymaps/mechmerlin/readme.md +++ b/keyboards/kc60/keymaps/mechmerlin/readme.md @@ -7,7 +7,7 @@ This is the 60% layout used by MechMerlin. It has 3 layers, base QWERTY, FN 1, a - Highly influenced by the KBP V60 and WKL B.Face standard layouts - Does not support any form of inswitch or underglow lighting as Merlin hates them. - Arrow toggle switch is FN + Space -- Rest is FN + R +- Reset is FN + R ### Build -- cgit v1.2.3-24-g4f1b From ea02a3ea237f1af4baa2cfc20f3770e6bd38d875 Mon Sep 17 00:00:00 2001 From: MechMerlin Date: Tue, 1 Aug 2017 12:23:08 -0700 Subject: Update keymap to have HHKB-ish support and readme along with it --- keyboards/kc60/keymaps/mechmerlin/keymap.c | 31 ++++++++++++++++++++++++----- keyboards/kc60/keymaps/mechmerlin/readme.md | 8 +++++++- 2 files changed, 33 insertions(+), 6 deletions(-) diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c index 39ac8c45f..d9a48f4e0 100644 --- a/keyboards/kc60/keymaps/mechmerlin/keymap.c +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -10,22 +10,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(1), KC_RALT, KC_RGUI, KC_RCTL \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(2), KC_RALT, KC_RGUI, KC_RCTL \ ), - [1] = KEYMAP( /* FN Layer 1 */ + [1] = KEYMAP( /* HHKB-ish Base Layout */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, MO(3), KC_RALT, KC_RGUI, KC_RCTL \ + ), + [2] = KEYMAP( /* FN Layer 1 - Basic QWERTY */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_NO, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, TG(2), KC_NO, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_TRNS, KC_TRNS, KC_TRNS, TG(4), KC_NO, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + [3] = KEYMAP( /* FN Layer 2 - HHKB-ish Base Layout */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), - [2] = KEYMAP( /* Arrow Layers */ + [4] = KEYMAP( /* Arrow Layers - Basic QWERTY ONLY */ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_UP, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT \ ), + [5] = KEYMAP( /* Blank Layer for later usage */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), }; diff --git a/keyboards/kc60/keymaps/mechmerlin/readme.md b/keyboards/kc60/keymaps/mechmerlin/readme.md index 10fb927ae..3a67ab17f 100644 --- a/keyboards/kc60/keymaps/mechmerlin/readme.md +++ b/keyboards/kc60/keymaps/mechmerlin/readme.md @@ -1,13 +1,19 @@ MechMerlin's KC60 Layout ====================== -This is the 60% layout used by MechMerlin. It has 3 layers, base QWERTY, FN 1, and an arrows only layer. +This is the 60% layout used by u/merlin36, host of the MechMerlin YouTube channel. +It has 5 layers, base QWERTY, base HHKB, FN 1, FN 2(HHKB), and an arrows only layer. + +Merlin's KC60 was acquired from Massdrop: https://www.massdrop.com/buy/kc60-mechanical-keyboard and is the Co-Star stabilizer version + +If you would like to program your KC60 using the manufacturer recommended approach, please follow the guide on keychatter: https://www.keychatter.com/2015/07/05/programming-the-kc60/. ## Keymap Notes - Highly influenced by the KBP V60 and WKL B.Face standard layouts - Does not support any form of inswitch or underglow lighting as Merlin hates them. - Arrow toggle switch is FN + Space - Reset is FN + R +- HHKB keymap is approximate as keyboard is not built like HHKB ### Build -- cgit v1.2.3-24-g4f1b From bc5c67b3b28cc6b40ec3153d4f323b69f6df8d9a Mon Sep 17 00:00:00 2001 From: MechMerlin Date: Tue, 1 Aug 2017 16:08:05 -0700 Subject: Change TG to TO --- keyboards/kc60/keymaps/mechmerlin/keymap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c index d9a48f4e0..352b40eb2 100644 --- a/keyboards/kc60/keymaps/mechmerlin/keymap.c +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -22,14 +22,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [2] = KEYMAP( /* FN Layer 1 - Basic QWERTY */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_NO, KC_PGUP, \ KC_TRNS, KC_TRNS, KC_TRNS, TG(4), KC_NO, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ ), [3] = KEYMAP( /* FN Layer 2 - HHKB-ish Base Layout */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_RIGHT, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_NO, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), -- cgit v1.2.3-24-g4f1b From bb30ff5f71f34e638ffc0ac58b99c75c9214fe7b Mon Sep 17 00:00:00 2001 From: Mark John Garcia Merin Date: Tue, 1 Aug 2017 18:57:49 -0700 Subject: Fix HHKBish layout arrows --- keyboards/kc60/keymaps/mechmerlin/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/kc60/keymaps/mechmerlin/keymap.c b/keyboards/kc60/keymaps/mechmerlin/keymap.c index 352b40eb2..97d458dec 100644 --- a/keyboards/kc60/keymaps/mechmerlin/keymap.c +++ b/keyboards/kc60/keymaps/mechmerlin/keymap.c @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [3] = KEYMAP( /* FN Layer 2 - HHKB-ish Base Layout */ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_BSPC, \ - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_NO, KC_TRNS, \ KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_NO, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), -- cgit v1.2.3-24-g4f1b From d28b2c395b66d24eb15bacedb8b84c8a3828ac57 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Wed, 2 Aug 2017 07:49:06 +0200 Subject: tap-dance: key + layer helper This adds the `ACTION_TAP_DANCE_DUAL_ROLE` helper, which makes it easy to have keys that act as a key on the first tap, and as a layer toggle on the second. Fixes #1532, reported by @Ptomerty. Signed-off-by: Gergely Nagy --- quantum/process_keycode/process_tap_dance.c | 18 ++++++++++++++++++ quantum/process_keycode/process_tap_dance.h | 14 ++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/quantum/process_keycode/process_tap_dance.c b/quantum/process_keycode/process_tap_dance.c index 4fd45810b..00870c4e7 100644 --- a/quantum/process_keycode/process_tap_dance.c +++ b/quantum/process_keycode/process_tap_dance.c @@ -41,6 +41,24 @@ void qk_tap_dance_pair_reset (qk_tap_dance_state_t *state, void *user_data) { } } +void qk_tap_dance_dual_role_finished (qk_tap_dance_state_t *state, void *user_data) { + qk_tap_dance_dual_role_t *pair = (qk_tap_dance_dual_role_t *)user_data; + + if (state->count == 1) { + register_code16 (pair->kc); + } else if (state->count == 2) { + layer_invert (pair->layer); + } +} + +void qk_tap_dance_dual_role_reset (qk_tap_dance_state_t *state, void *user_data) { + qk_tap_dance_dual_role_t *pair = (qk_tap_dance_dual_role_t *)user_data; + + if (state->count == 1) { + unregister_code16 (pair->kc); + } +} + static inline void _process_tap_dance_action_fn (qk_tap_dance_state_t *state, void *user_data, qk_tap_dance_user_fn_t fn) diff --git a/quantum/process_keycode/process_tap_dance.h b/quantum/process_keycode/process_tap_dance.h index f42c154a0..37a27c536 100644 --- a/quantum/process_keycode/process_tap_dance.h +++ b/quantum/process_keycode/process_tap_dance.h @@ -54,11 +54,22 @@ typedef struct uint16_t kc2; } qk_tap_dance_pair_t; +typedef struct +{ + uint16_t kc; + uint8_t layer; +} qk_tap_dance_dual_role_t; + #define ACTION_TAP_DANCE_DOUBLE(kc1, kc2) { \ .fn = { NULL, qk_tap_dance_pair_finished, qk_tap_dance_pair_reset }, \ .user_data = (void *)&((qk_tap_dance_pair_t) { kc1, kc2 }), \ } +#define ACTION_TAP_DANCE_DUAL_ROLE(kc, layer) { \ + .fn = { NULL, qk_tap_dance_dual_role_finished, qk_tap_dance_dual_role_reset }, \ + .user_data = (void *)&((qk_tap_dance_dual_role_t) { kc, layer }), \ + } + #define ACTION_TAP_DANCE_FN(user_fn) { \ .fn = { NULL, user_fn, NULL }, \ .user_data = NULL, \ @@ -86,6 +97,9 @@ void reset_tap_dance (qk_tap_dance_state_t *state); void qk_tap_dance_pair_finished (qk_tap_dance_state_t *state, void *user_data); void qk_tap_dance_pair_reset (qk_tap_dance_state_t *state, void *user_data); +void qk_tap_dance_dual_role_finished (qk_tap_dance_state_t *state, void *user_data); +void qk_tap_dance_dual_role_reset (qk_tap_dance_state_t *state, void *user_data); + #else #define TD(n) KC_NO -- cgit v1.2.3-24-g4f1b From 7371209ffb71da745424f2842000facef45d35e6 Mon Sep 17 00:00:00 2001 From: Eagleheardt Date: Wed, 2 Aug 2017 20:23:36 -0500 Subject: Adds Eagleheardt's XD60 keymap (#1528) * Add files via upload * Update readme.md * Update readme.md * Add files via upload --- keyboards/xd60/keymaps/BASE/keymap.c | 46 +++++++++++++++++++++++++++++++++++ keyboards/xd60/keymaps/BASE/readme.md | 5 ++++ keyboards/xd60/keymaps/base/keymap.c | 46 +++++++++++++++++++++++++++++++++++ keyboards/xd60/keymaps/base/readme.md | 9 +++++++ 4 files changed, 106 insertions(+) create mode 100644 keyboards/xd60/keymaps/BASE/keymap.c create mode 100644 keyboards/xd60/keymaps/BASE/readme.md create mode 100644 keyboards/xd60/keymaps/base/keymap.c create mode 100644 keyboards/xd60/keymaps/base/readme.md diff --git a/keyboards/xd60/keymaps/BASE/keymap.c b/keyboards/xd60/keymaps/BASE/keymap.c new file mode 100644 index 000000000..b3ccd5e58 --- /dev/null +++ b/keyboards/xd60/keymaps/BASE/keymap.c @@ -0,0 +1,46 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC , KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_NO, KC_RSFT ,KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO ,KC_PGUP, KC_INS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +// Custom Actions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +// Macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; + } + + return MACRO_NONE; +}; + +// Loop +void matrix_scan_user(void) { + // Empty +}; diff --git a/keyboards/xd60/keymaps/BASE/readme.md b/keyboards/xd60/keymaps/BASE/readme.md new file mode 100644 index 000000000..89f9acaa9 --- /dev/null +++ b/keyboards/xd60/keymaps/BASE/readme.md @@ -0,0 +1,5 @@ +![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg) + +All of the keys which CAN have a function should be assigned one. + +The keys with KC_NO cannot be assigned a value diff --git a/keyboards/xd60/keymaps/base/keymap.c b/keyboards/xd60/keymaps/base/keymap.c new file mode 100644 index 000000000..b3ccd5e58 --- /dev/null +++ b/keyboards/xd60/keymaps/base/keymap.c @@ -0,0 +1,46 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC , KC_NO, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_NO, KC_RSFT ,KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_RSFT, KC_NO ,KC_PGUP, KC_INS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +// Custom Actions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +// Macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; + } + + return MACRO_NONE; +}; + +// Loop +void matrix_scan_user(void) { + // Empty +}; diff --git a/keyboards/xd60/keymaps/base/readme.md b/keyboards/xd60/keymaps/base/readme.md new file mode 100644 index 000000000..d2a87bd72 --- /dev/null +++ b/keyboards/xd60/keymaps/base/readme.md @@ -0,0 +1,9 @@ +# Default Keymap for XIUDI's 60% XD60 PCB + +![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png) + +## Additional Notes +Default Keymap for XD60 as indicated on the original sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. -- cgit v1.2.3-24-g4f1b From b6280f979ca26e5d2c4685eb8d102ae532735642 Mon Sep 17 00:00:00 2001 From: Eagleheardt Date: Wed, 2 Aug 2017 20:29:22 -0500 Subject: Picture and details update I fixed the picture of the layout and added a bit of an explanation. It now matches the readme file from the uppercase BASE folder --- keyboards/xd60/keymaps/base/readme.md | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/keyboards/xd60/keymaps/base/readme.md b/keyboards/xd60/keymaps/base/readme.md index d2a87bd72..89f9acaa9 100644 --- a/keyboards/xd60/keymaps/base/readme.md +++ b/keyboards/xd60/keymaps/base/readme.md @@ -1,9 +1,5 @@ -# Default Keymap for XIUDI's 60% XD60 PCB +![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg) -![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png) +All of the keys which CAN have a function should be assigned one. -## Additional Notes -Default Keymap for XD60 as indicated on the original sale page. - -## Build -To build the default keymap, simply run `make xd60-default`. +The keys with KC_NO cannot be assigned a value -- cgit v1.2.3-24-g4f1b From 07ba06d0b6e516bcfa4cbccbed9cfd8dc131072a Mon Sep 17 00:00:00 2001 From: Balz Guenat Date: Thu, 3 Aug 2017 03:58:01 +0200 Subject: fix section in porting guide that refered to Makefile instead of rules.mk --- docs/porting_your_keyboard_to_qmk.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/porting_your_keyboard_to_qmk.md b/docs/porting_your_keyboard_to_qmk.md index 05787042f..5a5025c35 100644 --- a/docs/porting_your_keyboard_to_qmk.md +++ b/docs/porting_your_keyboard_to_qmk.md @@ -20,7 +20,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the `BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number. -## `/keyboards//Makefile` +## `/keyboards//rules.mk` The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`. -- cgit v1.2.3-24-g4f1b From 83b35bf6f68d16910b2acfaffa21c82f4ffbfd3a Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 3 Aug 2017 11:57:18 -0400 Subject: Update readme.md --- readme.md | 1 + 1 file changed, 1 insertion(+) diff --git a/readme.md b/readme.md index 6cdce7240..781b9f615 100644 --- a/readme.md +++ b/readme.md @@ -1,5 +1,6 @@ # Quantum Mechanical Keyboard Firmware +[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags) [![Build Status](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware) [![Gitter](https://img.shields.io/gitter/room/qmk/qmk_firmware.js.svg)](https://gitter.im/qmk/qmk_firmware) [![Docs Status](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm) -- cgit v1.2.3-24-g4f1b