From c8cbee5d718244dd06fda66a0edf5d4cb73b2434 Mon Sep 17 00:00:00 2001 From: Jeremy Bernhardt Date: Sat, 12 Jan 2019 18:51:21 -0600 Subject: Modified URLs to point to new locations --- keyboards/40percentclub/ut47/readme.md | 2 +- keyboards/6ball/readme.md | 2 +- keyboards/9key/readme.md | 2 +- keyboards/acr60/readme.md | 2 +- keyboards/al1/readme.md | 2 +- keyboards/alu84/readme.md | 2 +- keyboards/amj40/readme.md | 2 +- keyboards/amj60/readme.md | 2 +- keyboards/amj96/readme.md | 2 +- keyboards/amjpad/readme.md | 2 +- keyboards/atom47/readme.md | 2 +- keyboards/atom47/rev2/readme.md | 2 +- keyboards/atomic/readme.md | 2 +- keyboards/atreus/readme.md | 2 +- keyboards/atreus62/readme.md | 2 +- keyboards/bantam44/readme.md | 2 +- keyboards/bface/README.md | 2 +- keyboards/bfake/readme.md | 2 +- keyboards/bfo9000/readme.md | 2 +- keyboards/blockey/readme.md | 2 +- keyboards/bmini/readme.md | 2 +- keyboards/canoe/readme.md | 2 +- keyboards/chimera_ergo/readme.md | 2 +- keyboards/chimera_ortho/readme.md | 2 +- keyboards/chocopad/README.md | 2 +- keyboards/christmas_tree/readme.md | 2 +- keyboards/ckeys/nakey/readme.md | 2 +- keyboards/ckeys/obelus/readme.md | 2 +- keyboards/clueboard/17/readme.md | 2 +- keyboards/clueboard/2x1800/readme.md | 2 +- keyboards/clueboard/60/readme.md | 2 +- keyboards/clueboard/66/readme.md | 2 +- keyboards/clueboard/66_hotswap/readme.md | 2 +- keyboards/clueboard/card/readme.md | 2 +- keyboards/cod67/readme.md | 2 +- keyboards/contra/readme.md | 2 +- keyboards/converter/sun_usb/readme.md | 2 +- keyboards/converter/usb_usb/README.md | 2 +- keyboards/crawlpad/readme.md | 2 +- keyboards/cu24/readme.md | 2 +- keyboards/cu75/readme.md | 2 +- keyboards/daisy/readme.md | 2 +- keyboards/dc01/arrow/readme.md | 2 +- keyboards/dc01/left/readme.md | 2 +- keyboards/dc01/numpad/readme.md | 2 +- keyboards/dc01/right/readme.md | 2 +- keyboards/deltasplit75/readme.md | 2 +- keyboards/dilly/README.md | 2 +- keyboards/diverge3/readme.md | 2 +- keyboards/dk60/readme.md | 2 +- keyboards/duck/eagle_viper/readme.md | 2 +- keyboards/duck/eagle_viper/v2/readme.md | 2 +- keyboards/duck/jetfire/readme.md | 2 +- keyboards/duck/lightsaver/readme.md | 2 +- keyboards/duck/octagon/readme.md | 2 +- keyboards/duck/octagon/v1/readme.md | 2 +- keyboards/duck/octagon/v2/readme.md | 2 +- keyboards/dz60/readme.md | 2 +- keyboards/e6v2/le/readme.md | 2 +- keyboards/e6v2/oe/readme.md | 2 +- keyboards/eco/readme.md | 2 +- keyboards/ergo42/readme.md | 2 +- keyboards/ergoinu/readme.md | 2 +- keyboards/ergotravel/readme.md | 2 +- keyboards/facew/readme.md | 2 +- keyboards/fc660c/README.md | 2 +- keyboards/fc980c/README.md | 2 +- keyboards/felix/readme.md | 2 +- keyboards/fleuron/readme.md | 2 +- keyboards/fortitude60/readme.md | 2 +- keyboards/four_banger/readme.md | 2 +- keyboards/fourier/readme.md | 2 +- keyboards/gh60/readme.md | 2 +- keyboards/gh80_3000/readme.md | 2 +- keyboards/gonnerd/readme.md | 2 +- keyboards/hadron/readme.md | 2 +- keyboards/handwired/ibm122m/readme.md | 2 +- keyboards/handwired/not_so_minidox/readme.md | 2 +- keyboards/handwired/numpad20/readme.md | 2 +- keyboards/handwired/qc60/README.md | 2 +- keyboards/handwired/terminus_mini/readme.md | 2 +- keyboards/helix/readme.md | 2 +- keyboards/hhkb/readme.md | 2 +- keyboards/hid_liber/readme.md | 2 +- keyboards/hs60/v1/readme.md | 2 +- keyboards/hs60/v2/readme.md | 2 +- keyboards/iris/keymaps/s1carii/readme.md | 2 +- keyboards/jc65/v32a/readme.md | 2 +- keyboards/jc65/v32u4/readme.md | 2 +- keyboards/jj40/README.md | 2 +- keyboards/jj50/README.md | 2 +- keyboards/jm60/readme.md | 2 +- keyboards/k_type/readme.md | 2 +- keyboards/katana60/readme.md | 2 +- keyboards/kbd66/readme.md | 2 +- keyboards/kbd6x/readme.md | 2 +- keyboards/kbd75/readme.md | 2 +- keyboards/kbd8x/readme.md | 2 +- keyboards/kc60se/readme.md | 2 +- keyboards/kira75/readme.md | 2 +- keyboards/knops/mini/readme.md | 2 +- keyboards/kona_classic/README.md | 2 +- keyboards/laplace/readme.md | 2 +- keyboards/launchpad/readme.md | 2 +- keyboards/lets_split_eh/README.md | 2 +- keyboards/lfkeyboards/lfk65_hs/readme.md | 2 +- keyboards/lfkeyboards/lfk78/readme.md | 2 +- keyboards/lfkeyboards/lfk87/readme.md | 2 +- keyboards/lfkeyboards/mini1800/readme.md | 2 +- keyboards/lfkeyboards/readme.md | 2 +- keyboards/lfkeyboards/smk65/readme.md | 2 +- keyboards/m10a/readme.md | 2 +- keyboards/mechmini/readme.md | 2 +- keyboards/mechmini/v1/README.md | 2 +- keyboards/mechmini/v2/README.md | 2 +- keyboards/meira/readme.md | 2 +- keyboards/melody96/readme.md | 2 +- keyboards/meme/readme.md | 2 +- keyboards/minidox/readme.md | 2 +- keyboards/mitosis/readme.md | 2 +- keyboards/miuni32/readme.md | 2 +- keyboards/mxss/readme.md | 2 +- keyboards/niu_mini/readme.md | 2 +- keyboards/novelpad/README.md | 2 +- keyboards/noxary/268/readme.md | 2 +- keyboards/nyquist/readme.md | 2 +- keyboards/ok60/readme.md | 2 +- keyboards/omnikey_blackheart/readme.md | 2 +- keyboards/paladin64/readme.md | 2 +- keyboards/phantom/readme.md | 2 +- keyboards/planck/keymaps/phreed/readme.md | 4 ++-- keyboards/playkbtw/ca66/readme.md | 2 +- keyboards/preonic/readme.md | 2 +- keyboards/quefrency/readme.md | 2 +- keyboards/qwertyydox/readme.md | 2 +- keyboards/rama/m10_b/readme.md | 2 +- keyboards/rorschach/readme.md | 2 +- keyboards/s60_x/readme.md | 2 +- keyboards/satan/readme.md | 2 +- keyboards/scrabblepad/readme.md | 2 +- keyboards/singa/readme.md | 2 +- keyboards/sixkeyboard/readme.md | 2 +- keyboards/sixshooter/readme.md | 2 +- keyboards/speedo/readme.md | 2 +- keyboards/staryu/readme.md | 2 +- keyboards/sx60/readme.md | 2 +- keyboards/tanuki/readme.md | 2 +- keyboards/telophase/readme.md | 2 +- keyboards/tetris/readme.md | 2 +- keyboards/the_ruler/readme.md | 2 +- keyboards/tkc1800/README.md | 2 +- keyboards/tokyo60/readme.md | 2 +- keyboards/tragicforce68/README.md | 2 +- keyboards/uk78/readme.md | 2 +- keyboards/v60_type_r/readme.md | 2 +- keyboards/vinta/readme.md | 2 +- keyboards/vision_division/readme.md | 2 +- keyboards/viterbi/readme.md | 2 +- keyboards/wavelet/readme.md | 2 +- keyboards/whitefox/readme.md | 2 +- keyboards/xd60/readme.md | 2 +- keyboards/ymd75/README.md | 2 +- keyboards/zen/readme.md | 2 +- keyboards/zlant/readme.md | 2 +- 164 files changed, 165 insertions(+), 165 deletions(-) diff --git a/keyboards/40percentclub/ut47/readme.md b/keyboards/40percentclub/ut47/readme.md index bbae1384a..31be1d9f7 100644 --- a/keyboards/40percentclub/ut47/readme.md +++ b/keyboards/40percentclub/ut47/readme.md @@ -33,7 +33,7 @@ Go to the [default layout README](keymaps/default/readme.md) for more informatio Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap) -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ### Build Guide diff --git a/keyboards/6ball/readme.md b/keyboards/6ball/readme.md index 7316a9816..c9548453a 100644 --- a/keyboards/6ball/readme.md +++ b/keyboards/6ball/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make 6ball:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/9key/readme.md b/keyboards/9key/readme.md index 8c6699129..89629cc8c 100644 --- a/keyboards/9key/readme.md +++ b/keyboards/9key/readme.md @@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment): make 9key:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/acr60/readme.md b/keyboards/acr60/readme.md index a0ba2ecde..54ea265f1 100644 --- a/keyboards/acr60/readme.md +++ b/keyboards/acr60/readme.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make acr60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/al1/readme.md b/keyboards/al1/readme.md index 0032885ff..bdb336a75 100644 --- a/keyboards/al1/readme.md +++ b/keyboards/al1/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make al1:default make al1:splitbs -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/alu84/readme.md b/keyboards/alu84/readme.md index ab20c4138..f98addd0b 100644 --- a/keyboards/alu84/readme.md +++ b/keyboards/alu84/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make alu84:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md index 42c5374d5..fbf1d9f22 100755 --- a/keyboards/amj40/readme.md +++ b/keyboards/amj40/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make amj40:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md index e87b1f9f8..394f86456 100644 --- a/keyboards/amj60/readme.md +++ b/keyboards/amj60/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make amj60:maximized -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amj96/readme.md b/keyboards/amj96/readme.md index 7c1b61c76..f13130047 100644 --- a/keyboards/amj96/readme.md +++ b/keyboards/amj96/readme.md @@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment): make amj96:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Notes - In-switch and underglow LEDs currently not supported. diff --git a/keyboards/amjpad/readme.md b/keyboards/amjpad/readme.md index 27d5e0927..c069af25a 100644 --- a/keyboards/amjpad/readme.md +++ b/keyboards/amjpad/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make amjpad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atom47/readme.md b/keyboards/atom47/readme.md index 66f599c6b..c3cffcea7 100644 --- a/keyboards/atom47/readme.md +++ b/keyboards/atom47/readme.md @@ -21,6 +21,6 @@ Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?t ## Build To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ![Atom47](https://i.imgur.com/JfYnOba.jpg) diff --git a/keyboards/atom47/rev2/readme.md b/keyboards/atom47/rev2/readme.md index 30f44df1d..b63e1bb44 100644 --- a/keyboards/atom47/rev2/readme.md +++ b/keyboards/atom47/rev2/readme.md @@ -20,4 +20,4 @@ To build the default keymap, simply run `make atom47/rev2:default`. For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index 54a6ee9b5..ab2fa4a23 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make atomic:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 0756c186c..50901ee32 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -18,4 +18,4 @@ the repository, not the directory containing this readme. If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md index b2de90011..bb2a24e87 100644 --- a/keyboards/atreus62/readme.md +++ b/keyboards/atreus62/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make atreus62:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md index 0103c1647..08a5167c6 100644 --- a/keyboards/bantam44/readme.md +++ b/keyboards/bantam44/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make bantam44:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bface/README.md b/keyboards/bface/README.md index 4120e3bc2..0dac7caf3 100644 --- a/keyboards/bface/README.md +++ b/keyboards/bface/README.md @@ -41,4 +41,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bfake/readme.md b/keyboards/bfake/readme.md index ca12b4996..1ccc25f2d 100644 --- a/keyboards/bfake/readme.md +++ b/keyboards/bfake/readme.md @@ -41,4 +41,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bfo9000/readme.md b/keyboards/bfo9000/readme.md index 20c9b2ff7..d2175af23 100644 --- a/keyboards/bfo9000/readme.md +++ b/keyboards/bfo9000/readme.md @@ -15,4 +15,4 @@ Example of flashing this keyboard: make bfo9000:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/blockey/readme.md b/keyboards/blockey/readme.md index 24626318f..20cb7e98c 100644 --- a/keyboards/blockey/readme.md +++ b/keyboards/blockey/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make blockey:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bmini/readme.md b/keyboards/bmini/readme.md index 38dc49307..9c7026212 100644 --- a/keyboards/bmini/readme.md +++ b/keyboards/bmini/readme.md @@ -41,4 +41,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/canoe/readme.md b/keyboards/canoe/readme.md index f58ffe4fd..b8ddadea7 100644 --- a/keyboards/canoe/readme.md +++ b/keyboards/canoe/readme.md @@ -41,4 +41,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/chimera_ergo/readme.md b/keyboards/chimera_ergo/readme.md index 619229544..2b5d2d65c 100644 --- a/keyboards/chimera_ergo/readme.md +++ b/keyboards/chimera_ergo/readme.md @@ -12,5 +12,5 @@ Make example for this keyboard (after setting up your build environment): make chimera_ergo:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/chimera_ortho/readme.md b/keyboards/chimera_ortho/readme.md index 18ab3b09e..644300f98 100644 --- a/keyboards/chimera_ortho/readme.md +++ b/keyboards/chimera_ortho/readme.md @@ -15,5 +15,5 @@ Make example for this keyboard (after setting up your build environment): make chimera_ortho:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/chocopad/README.md b/keyboards/chocopad/README.md index ad0f6b356..ae28009c3 100644 --- a/keyboards/chocopad/README.md +++ b/keyboards/chocopad/README.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make chocopad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/christmas_tree/readme.md b/keyboards/christmas_tree/readme.md index e0252328d..b3337dd5b 100644 --- a/keyboards/christmas_tree/readme.md +++ b/keyboards/christmas_tree/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make christmas_tree/V2017:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/ckeys/nakey/readme.md b/keyboards/ckeys/nakey/readme.md index c7250cf50..b85e822ab 100644 --- a/keyboards/ckeys/nakey/readme.md +++ b/keyboards/ckeys/nakey/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make ckeys/nakey:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Quantum MK Firmware diff --git a/keyboards/ckeys/obelus/readme.md b/keyboards/ckeys/obelus/readme.md index 6767956bf..640e0f55e 100644 --- a/keyboards/ckeys/obelus/readme.md +++ b/keyboards/ckeys/obelus/readme.md @@ -15,5 +15,5 @@ Or to make and flash: make ckeys/obelus:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) and [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/17/readme.md b/keyboards/clueboard/17/readme.md index 877adc784..8b449be3f 100644 --- a/keyboards/clueboard/17/readme.md +++ b/keyboards/clueboard/17/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make clueboard/17:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/2x1800/readme.md b/keyboards/clueboard/2x1800/readme.md index cccd8ac15..afc043f48 100644 --- a/keyboards/clueboard/2x1800/readme.md +++ b/keyboards/clueboard/2x1800/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make 2x1800:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/60/readme.md b/keyboards/clueboard/60/readme.md index b81d70d0c..e3255f507 100644 --- a/keyboards/clueboard/60/readme.md +++ b/keyboards/clueboard/60/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make clueboard/60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/66/readme.md b/keyboards/clueboard/66/readme.md index 42a261e2a..b7ca6cb56 100644 --- a/keyboards/clueboard/66/readme.md +++ b/keyboards/clueboard/66/readme.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make clueboard/66/rev3:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/66_hotswap/readme.md b/keyboards/clueboard/66_hotswap/readme.md index 014c761b0..8ece12e88 100644 --- a/keyboards/clueboard/66_hotswap/readme.md +++ b/keyboards/clueboard/66_hotswap/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make clueboard/66_hotswap:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/card/readme.md b/keyboards/clueboard/card/readme.md index 27089d465..00d7d285b 100644 --- a/keyboards/clueboard/card/readme.md +++ b/keyboards/clueboard/card/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make clueboard/card:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/cod67/readme.md b/keyboards/cod67/readme.md index 9471a2034..5e64ff758 100644 --- a/keyboards/cod67/readme.md +++ b/keyboards/cod67/readme.md @@ -20,7 +20,7 @@ Make example for this keyboard (after setting up your build environment): make cod67:default:bin -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Rename the resulting `.bin` file to `cod67.bin`. diff --git a/keyboards/contra/readme.md b/keyboards/contra/readme.md index c1915a811..f16598581 100644 --- a/keyboards/contra/readme.md +++ b/keyboards/contra/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make contra:dana -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/converter/sun_usb/readme.md b/keyboards/converter/sun_usb/readme.md index 3470e6091..69bc6ef04 100644 --- a/keyboards/converter/sun_usb/readme.md +++ b/keyboards/converter/sun_usb/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make converter/sun_usb/type5:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Hardware diff --git a/keyboards/converter/usb_usb/README.md b/keyboards/converter/usb_usb/README.md index faee7a5fd..64334a85f 100644 --- a/keyboards/converter/usb_usb/README.md +++ b/keyboards/converter/usb_usb/README.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make converter/usb_usb:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Note that you have to choose the right hardware variant as your subproject, otherwise you will probably have issues. diff --git a/keyboards/crawlpad/readme.md b/keyboards/crawlpad/readme.md index 0bdc0f172..b2ea0e8c2 100644 --- a/keyboards/crawlpad/readme.md +++ b/keyboards/crawlpad/readme.md @@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment): make crawlpad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com). \ No newline at end of file diff --git a/keyboards/cu24/readme.md b/keyboards/cu24/readme.md index 4624c1aa9..ca3f3f5a0 100644 --- a/keyboards/cu24/readme.md +++ b/keyboards/cu24/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make CU24:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/cu75/readme.md b/keyboards/cu75/readme.md index a5193bd70..43603440f 100644 --- a/keyboards/cu75/readme.md +++ b/keyboards/cu75/readme.md @@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment): make CU75:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/daisy/readme.md b/keyboards/daisy/readme.md index 427891d96..c8175c283 100644 --- a/keyboards/daisy/readme.md +++ b/keyboards/daisy/readme.md @@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment): make daisy:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. # Other Keymaps diff --git a/keyboards/dc01/arrow/readme.md b/keyboards/dc01/arrow/readme.md index ae643114a..4c7178d78 100644 --- a/keyboards/dc01/arrow/readme.md +++ b/keyboards/dc01/arrow/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make dc01/arrow:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/dc01/left/readme.md b/keyboards/dc01/left/readme.md index 1613297d0..60b90a800 100644 --- a/keyboards/dc01/left/readme.md +++ b/keyboards/dc01/left/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make dc01/left:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/dc01/numpad/readme.md b/keyboards/dc01/numpad/readme.md index c50fe6b99..3345b5f36 100644 --- a/keyboards/dc01/numpad/readme.md +++ b/keyboards/dc01/numpad/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make dc01/numpad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/dc01/right/readme.md b/keyboards/dc01/right/readme.md index 32664ebb7..a93459305 100644 --- a/keyboards/dc01/right/readme.md +++ b/keyboards/dc01/right/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make dc01/right:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/deltasplit75/readme.md b/keyboards/deltasplit75/readme.md index 990f8902d..096fced97 100644 --- a/keyboards/deltasplit75/readme.md +++ b/keyboards/deltasplit75/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make deltasplit75/v2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Files are available here: [DeltaSplit75 Case Files](https://github.com/xyxjj/DeltaSplit75-Case-files) diff --git a/keyboards/dilly/README.md b/keyboards/dilly/README.md index 866d07ccb..a676313f3 100644 --- a/keyboards/dilly/README.md +++ b/keyboards/dilly/README.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make dilly:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/diverge3/readme.md b/keyboards/diverge3/readme.md index 43add9d99..45ddaa64c 100644 --- a/keyboards/diverge3/readme.md +++ b/keyboards/diverge3/readme.md @@ -14,7 +14,7 @@ Or for the [Workman](https://github.com/ojbucao/workman) layout: make diverge3:workman -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. # Reflashing Animus Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites. \ No newline at end of file diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md index 3e6f68061..b9d9b6711 100644 --- a/keyboards/dk60/readme.md +++ b/keyboards/dk60/readme.md @@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment): make dk60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Open Hardware project! diff --git a/keyboards/duck/eagle_viper/readme.md b/keyboards/duck/eagle_viper/readme.md index ded0fa72e..14fb16669 100644 --- a/keyboards/duck/eagle_viper/readme.md +++ b/keyboards/duck/eagle_viper/readme.md @@ -2,7 +2,7 @@ Non official firmware for custom Korean keyboard with 60% key layout made by Duck. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127) diff --git a/keyboards/duck/eagle_viper/v2/readme.md b/keyboards/duck/eagle_viper/v2/readme.md index b613b63b9..32ad8453c 100644 --- a/keyboards/duck/eagle_viper/v2/readme.md +++ b/keyboards/duck/eagle_viper/v2/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make eagle_viper/v2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Hardware Notes diff --git a/keyboards/duck/jetfire/readme.md b/keyboards/duck/jetfire/readme.md index fe641e622..34b351a72 100644 --- a/keyboards/duck/jetfire/readme.md +++ b/keyboards/duck/jetfire/readme.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make duck/jetfire:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/duck/lightsaver/readme.md b/keyboards/duck/lightsaver/readme.md index 9d4b453c0..a77a90111 100644 --- a/keyboards/duck/lightsaver/readme.md +++ b/keyboards/duck/lightsaver/readme.md @@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment): make lightsaver:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Notes Thanks to Ralf Schmitt for previous implementations in his [TMK fork](https://github.com/xauser/tmk_keyboard/tree/xauser/) and few helping words. diff --git a/keyboards/duck/octagon/readme.md b/keyboards/duck/octagon/readme.md index 7f5b2f7e6..b91a76c70 100644 --- a/keyboards/duck/octagon/readme.md +++ b/keyboards/duck/octagon/readme.md @@ -2,7 +2,7 @@ Non official firmware for custom Korean keyboard with 75% key layout made by Duck. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Newest version is the [Octagon V2](http://duck0113.tistory.com/127) diff --git a/keyboards/duck/octagon/v1/readme.md b/keyboards/duck/octagon/v1/readme.md index f5cb2d789..f614b3577 100644 --- a/keyboards/duck/octagon/v1/readme.md +++ b/keyboards/duck/octagon/v1/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make duck/octagon/v1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Hardware Notes diff --git a/keyboards/duck/octagon/v2/readme.md b/keyboards/duck/octagon/v2/readme.md index 125f09f9c..b409454fc 100644 --- a/keyboards/duck/octagon/v2/readme.md +++ b/keyboards/duck/octagon/v2/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make octagon/v2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Hardware Notes diff --git a/keyboards/dz60/readme.md b/keyboards/dz60/readme.md index 78b290fba..a06db93b5 100644 --- a/keyboards/dz60/readme.md +++ b/keyboards/dz60/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make dz60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/e6v2/le/readme.md b/keyboards/e6v2/le/readme.md index 20848a2bc..844b31568 100644 --- a/keyboards/e6v2/le/readme.md +++ b/keyboards/e6v2/le/readme.md @@ -16,4 +16,4 @@ Or to make and flash: make e6v2/le:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/e6v2/oe/readme.md b/keyboards/e6v2/oe/readme.md index 3e1c57530..9d5dd6261 100644 --- a/keyboards/e6v2/oe/readme.md +++ b/keyboards/e6v2/oe/readme.md @@ -16,4 +16,4 @@ Or to make and flash: make e6v2/oe:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md index 0826337e7..fac80e0a1 100644 --- a/keyboards/eco/readme.md +++ b/keyboards/eco/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make eco/rev2:that_canadian -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/ergo42/readme.md b/keyboards/ergo42/readme.md index 9534bc713..112e62b55 100644 --- a/keyboards/ergo42/readme.md +++ b/keyboards/ergo42/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make ergo42/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/ergoinu/readme.md b/keyboards/ergoinu/readme.md index a0d1c18a2..06e0cf352 100644 --- a/keyboards/ergoinu/readme.md +++ b/keyboards/ergoinu/readme.md @@ -18,4 +18,4 @@ Make example for this keyboard (after setting up your build environment): make ergoinu:default_jis -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/ergotravel/readme.md b/keyboards/ergotravel/readme.md index ad37bc1ac..7c76d5fc0 100644 --- a/keyboards/ergotravel/readme.md +++ b/keyboards/ergotravel/readme.md @@ -23,6 +23,6 @@ Example of flashing this keyboard: make ergotravel/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau) diff --git a/keyboards/facew/readme.md b/keyboards/facew/readme.md index 6d7186704..578dcf888 100644 --- a/keyboards/facew/readme.md +++ b/keyboards/facew/readme.md @@ -50,4 +50,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/fc660c/README.md b/keyboards/fc660c/README.md index 5cb9bcea4..638c55957 100644 --- a/keyboards/fc660c/README.md +++ b/keyboards/fc660c/README.md @@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment): make fc660c:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. To flash the firmware, press the reset button on the controller and run: diff --git a/keyboards/fc980c/README.md b/keyboards/fc980c/README.md index 16ad9021c..768d7d3a3 100644 --- a/keyboards/fc980c/README.md +++ b/keyboards/fc980c/README.md @@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment): make fc980c:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. To flash the firmware, press the reset button on the controller and run: diff --git a/keyboards/felix/readme.md b/keyboards/felix/readme.md index e41782c3c..d671b0c01 100644 --- a/keyboards/felix/readme.md +++ b/keyboards/felix/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make felix:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/fleuron/readme.md b/keyboards/fleuron/readme.md index 077753a28..286ceb7cf 100644 --- a/keyboards/fleuron/readme.md +++ b/keyboards/fleuron/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make fleuron:default to build firmware make fleuron:default:dfu to make and flash with dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/fortitude60/readme.md b/keyboards/fortitude60/readme.md index 58453ccc4..369f5e24b 100644 --- a/keyboards/fortitude60/readme.md +++ b/keyboards/fortitude60/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make fortitude60/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/four_banger/readme.md b/keyboards/four_banger/readme.md index ffb6091f9..913ca6ee8 100644 --- a/keyboards/four_banger/readme.md +++ b/keyboards/four_banger/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make four_banger:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/fourier/readme.md b/keyboards/fourier/readme.md index 9420fb30e..ca29c7aba 100644 --- a/keyboards/fourier/readme.md +++ b/keyboards/fourier/readme.md @@ -15,6 +15,6 @@ Example of flashing this keyboard: make fourier/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Keebio Build Guides](https://docs.keeb.io) diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md index 01a23aca7..a1469accf 100644 --- a/keyboards/gh60/readme.md +++ b/keyboards/gh60/readme.md @@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment): make gh60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## GH60 Hardware Information diff --git a/keyboards/gh80_3000/readme.md b/keyboards/gh80_3000/readme.md index d6beebf90..ca2694704 100644 --- a/keyboards/gh80_3000/readme.md +++ b/keyboards/gh80_3000/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make gh80_3000:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md index 9bc879e3d..223fdf3d3 100644 --- a/keyboards/gonnerd/readme.md +++ b/keyboards/gonnerd/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make gonnerd:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Changing Bootloader diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md index 13ef6c66a..a6119c4a1 100644 --- a/keyboards/hadron/readme.md +++ b/keyboards/hadron/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make hadron:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/handwired/ibm122m/readme.md b/keyboards/handwired/ibm122m/readme.md index 09dac49c0..de89d7596 100644 --- a/keyboards/handwired/ibm122m/readme.md +++ b/keyboards/handwired/ibm122m/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make handwired/ibm122m:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/handwired/not_so_minidox/readme.md b/keyboards/handwired/not_so_minidox/readme.md index bd4060735..c791e6e3f 100644 --- a/keyboards/handwired/not_so_minidox/readme.md +++ b/keyboards/handwired/not_so_minidox/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make not_so_minidox/rev1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Flashing ------- diff --git a/keyboards/handwired/numpad20/readme.md b/keyboards/handwired/numpad20/readme.md index 29c832daf..4e14fbb00 100644 --- a/keyboards/handwired/numpad20/readme.md +++ b/keyboards/handwired/numpad20/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make handwired/numpad20:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/handwired/qc60/README.md b/keyboards/handwired/qc60/README.md index 85570a8a7..8477bb04d 100644 --- a/keyboards/handwired/qc60/README.md +++ b/keyboards/handwired/qc60/README.md @@ -19,4 +19,4 @@ Example of flashing this keyboard: make handwired/qc60/proto:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/handwired/terminus_mini/readme.md b/keyboards/handwired/terminus_mini/readme.md index 94249d6a9..5f0271bb4 100644 --- a/keyboards/handwired/terminus_mini/readme.md +++ b/keyboards/handwired/terminus_mini/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make handwired/terminus_mini:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/helix/readme.md b/keyboards/helix/readme.md index 5ee233e81..a535df052 100644 --- a/keyboards/helix/readme.md +++ b/keyboards/helix/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make helix:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md index 8774a73f7..57eb81439 100644 --- a/keyboards/hhkb/readme.md +++ b/keyboards/hhkb/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make hhkb:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/hid_liber/readme.md b/keyboards/hid_liber/readme.md index 77ea1babb..bc16c165b 100755 --- a/keyboards/hid_liber/readme.md +++ b/keyboards/hid_liber/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make hid_liber:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/hs60/v1/readme.md b/keyboards/hs60/v1/readme.md index 9034e9b88..cbf5f4faa 100644 --- a/keyboards/hs60/v1/readme.md +++ b/keyboards/hs60/v1/readme.md @@ -19,4 +19,4 @@ Make example for this keyboard (after setting up your build environment): make hs60/v1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/hs60/v2/readme.md b/keyboards/hs60/v2/readme.md index 50c91698d..e6658ced9 100644 --- a/keyboards/hs60/v2/readme.md +++ b/keyboards/hs60/v2/readme.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make hs60/v2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/iris/keymaps/s1carii/readme.md b/keyboards/iris/keymaps/s1carii/readme.md index 9b46e8670..6d94b6c87 100644 --- a/keyboards/iris/keymaps/s1carii/readme.md +++ b/keyboards/iris/keymaps/s1carii/readme.md @@ -6,4 +6,4 @@ Make example for this keymap (after setting up your build environment): make iris/rev2:s1carii:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/jc65/v32a/readme.md b/keyboards/jc65/v32a/readme.md index b4d4f7e50..5027f8361 100644 --- a/keyboards/jc65/v32a/readme.md +++ b/keyboards/jc65/v32a/readme.md @@ -29,4 +29,4 @@ Flashing on Windows can be accomplished by downloading [HIDBootFlash](http://vus To put the PS2AVRGB board into reset, hold down the left control key while plugging in the keyboard. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/jc65/v32u4/readme.md b/keyboards/jc65/v32u4/readme.md index 396c19e8d..61ac70e28 100644 --- a/keyboards/jc65/v32u4/readme.md +++ b/keyboards/jc65/v32u4/readme.md @@ -19,4 +19,4 @@ Or to make and flash: make jc65/v32u4:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/jj40/README.md b/keyboards/jj40/README.md index 39e871d87..26d551cf7 100644 --- a/keyboards/jj40/README.md +++ b/keyboards/jj40/README.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make jj40:default:program -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the diff --git a/keyboards/jj50/README.md b/keyboards/jj50/README.md index 2f04f036b..397889535 100644 --- a/keyboards/jj50/README.md +++ b/keyboards/jj50/README.md @@ -25,7 +25,7 @@ $ make jj50:default:program ``` It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the diff --git a/keyboards/jm60/readme.md b/keyboards/jm60/readme.md index b513a2c4c..51473fc09 100644 --- a/keyboards/jm60/readme.md +++ b/keyboards/jm60/readme.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make jm60:default:bin -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Flashing Instructions diff --git a/keyboards/k_type/readme.md b/keyboards/k_type/readme.md index ad4dd8ad8..1118f8655 100644 --- a/keyboards/k_type/readme.md +++ b/keyboards/k_type/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make k_type:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/katana60/readme.md b/keyboards/katana60/readme.md index 918c9b997..5e1c7d390 100644 --- a/keyboards/katana60/readme.md +++ b/keyboards/katana60/readme.md @@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment): make katana60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/) \ No newline at end of file diff --git a/keyboards/kbd66/readme.md b/keyboards/kbd66/readme.md index 71fe1f2e3..2ac555571 100644 --- a/keyboards/kbd66/readme.md +++ b/keyboards/kbd66/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make kbd66:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/kbd6x/readme.md b/keyboards/kbd6x/readme.md index b50646ace..0e8e86562 100644 --- a/keyboards/kbd6x/readme.md +++ b/keyboards/kbd6x/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make kbd6x:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/kbd75/readme.md b/keyboards/kbd75/readme.md index 0545eb66d..4c93a8fbe 100644 --- a/keyboards/kbd75/readme.md +++ b/keyboards/kbd75/readme.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make kbd75/rev1:default make kbd75/rev2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/kbd8x/readme.md b/keyboards/kbd8x/readme.md index fe4981975..8c50af68f 100644 --- a/keyboards/kbd8x/readme.md +++ b/keyboards/kbd8x/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make kbd8x:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/kc60se/readme.md b/keyboards/kc60se/readme.md index da004c40d..d6edbdb35 100644 --- a/keyboards/kc60se/readme.md +++ b/keyboards/kc60se/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make kc60se:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/kira75/readme.md b/keyboards/kira75/readme.md index f2c0f3228..5ab0b3f2c 100644 --- a/keyboards/kira75/readme.md +++ b/keyboards/kira75/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make kira75:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/knops/mini/readme.md b/keyboards/knops/mini/readme.md index 86cff4a61..4df6c207a 100644 --- a/keyboards/knops/mini/readme.md +++ b/keyboards/knops/mini/readme.md @@ -18,4 +18,4 @@ Make example for this keyboard (after setting up your build environment): make knops/mini:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/kona_classic/README.md b/keyboards/kona_classic/README.md index bd818ed92..0ea5b00ea 100644 --- a/keyboards/kona_classic/README.md +++ b/keyboards/kona_classic/README.md @@ -44,4 +44,4 @@ Make example for this keyboard (after setting up your build environment): make kona_classic:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/laplace/readme.md b/keyboards/laplace/readme.md index 71b328008..7871992f7 100644 --- a/keyboards/laplace/readme.md +++ b/keyboards/laplace/readme.md @@ -15,6 +15,6 @@ Example of flashing this keyboard: make laplace:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Keebio Build Guides](https://docs.keeb.io) diff --git a/keyboards/launchpad/readme.md b/keyboards/launchpad/readme.md index 80b5de321..812812194 100644 --- a/keyboards/launchpad/readme.md +++ b/keyboards/launchpad/readme.md @@ -23,7 +23,7 @@ Make example for this keyboard (after setting up your build environment): make launchpad/rev1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- diff --git a/keyboards/lets_split_eh/README.md b/keyboards/lets_split_eh/README.md index 185e74dab..180cb33d7 100644 --- a/keyboards/lets_split_eh/README.md +++ b/keyboards/lets_split_eh/README.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make lets_split_eh/eh:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/lfkeyboards/lfk65_hs/readme.md b/keyboards/lfkeyboards/lfk65_hs/readme.md index 382538c68..8824804d7 100644 --- a/keyboards/lfkeyboards/lfk65_hs/readme.md +++ b/keyboards/lfkeyboards/lfk65_hs/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make lfkeyboards/lfk65_hs:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/lfkeyboards/lfk78/readme.md b/keyboards/lfkeyboards/lfk78/readme.md index 3ca0b2e04..7cef9735d 100644 --- a/keyboards/lfkeyboards/lfk78/readme.md +++ b/keyboards/lfkeyboards/lfk78/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make lfkeyboards/lfk78:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/lfkeyboards/lfk87/readme.md b/keyboards/lfkeyboards/lfk87/readme.md index 15e551710..44a36c479 100644 --- a/keyboards/lfkeyboards/lfk87/readme.md +++ b/keyboards/lfkeyboards/lfk87/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make lfkeyboards/lfk87:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/lfkeyboards/mini1800/readme.md b/keyboards/lfkeyboards/mini1800/readme.md index 96de85df1..e2839275c 100644 --- a/keyboards/lfkeyboards/mini1800/readme.md +++ b/keyboards/lfkeyboards/mini1800/readme.md @@ -9,4 +9,4 @@ Make example for this keyboard (after setting up your build environment): make lfkeyboards/mini1800:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/lfkeyboards/readme.md b/keyboards/lfkeyboards/readme.md index 0fd05adef..0c262f30b 100644 --- a/keyboards/lfkeyboards/readme.md +++ b/keyboards/lfkeyboards/readme.md @@ -5,4 +5,4 @@ This is the parent directory for all LFKeyboard keyboards. Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/lfkeyboards/smk65/readme.md b/keyboards/lfkeyboards/smk65/readme.md index 8265e36e6..0d04ac5f7 100644 --- a/keyboards/lfkeyboards/smk65/readme.md +++ b/keyboards/lfkeyboards/smk65/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make lfkeyboards/smk65:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/m10a/readme.md b/keyboards/m10a/readme.md index 6e48b2285..7123e6462 100644 --- a/keyboards/m10a/readme.md +++ b/keyboards/m10a/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make m10a:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/mechmini/readme.md b/keyboards/mechmini/readme.md index 427cbbd03..fc43eb124 100644 --- a/keyboards/mechmini/readme.md +++ b/keyboards/mechmini/readme.md @@ -19,7 +19,7 @@ Make example for this keyboard (after setting up your build environment), this w make mechmini:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Mechmini Notes diff --git a/keyboards/mechmini/v1/README.md b/keyboards/mechmini/v1/README.md index 9f44a9c2c..b4a1924c4 100644 --- a/keyboards/mechmini/v1/README.md +++ b/keyboards/mechmini/v1/README.md @@ -11,7 +11,7 @@ Make example for this keyboard (after setting up your build environment): make mechmini/v1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Mechmini Notes diff --git a/keyboards/mechmini/v2/README.md b/keyboards/mechmini/v2/README.md index a43afc674..fdc9fef9b 100644 --- a/keyboards/mechmini/v2/README.md +++ b/keyboards/mechmini/v2/README.md @@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment), this w make mechmini/v2:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Mechmini Notes diff --git a/keyboards/meira/readme.md b/keyboards/meira/readme.md index 6d5d9b553..10c27ee94 100644 --- a/keyboards/meira/readme.md +++ b/keyboards/meira/readme.md @@ -18,7 +18,7 @@ or make meira/featherble:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information on generic QMK configuration and setup. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information on generic QMK configuration and setup. Both the Pro Micro and the Feather BLE use the Catalina bootloader, which is typically programmed using avrdude. diff --git a/keyboards/melody96/readme.md b/keyboards/melody96/readme.md index b43398dd3..3df1e48b4 100644 --- a/keyboards/melody96/readme.md +++ b/keyboards/melody96/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make melody96:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/meme/readme.md b/keyboards/meme/readme.md index 9d3bce948..94b55d746 100644 --- a/keyboards/meme/readme.md +++ b/keyboards/meme/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make meme:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md index 9ec306421..74afedc18 100644 --- a/keyboards/minidox/readme.md +++ b/keyboards/minidox/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make minidox/rev1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Build Guide diff --git a/keyboards/mitosis/readme.md b/keyboards/mitosis/readme.md index e1b071101..d3cf12af8 100644 --- a/keyboards/mitosis/readme.md +++ b/keyboards/mitosis/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): make mitosis:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Notes diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md index 7fc72d601..359424151 100644 --- a/keyboards/miuni32/readme.md +++ b/keyboards/miuni32/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make miuni32-default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/mxss/readme.md b/keyboards/mxss/readme.md index 54e07e27b..181b6366a 100644 --- a/keyboards/mxss/readme.md +++ b/keyboards/mxss/readme.md @@ -29,7 +29,7 @@ Make example for this keyboard (after setting up your build environment): make mxss:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. # Front LED Operation diff --git a/keyboards/niu_mini/readme.md b/keyboards/niu_mini/readme.md index 91f0cd4b6..af05d34fa 100644 --- a/keyboards/niu_mini/readme.md +++ b/keyboards/niu_mini/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make niu_mini:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/novelpad/README.md b/keyboards/novelpad/README.md index 70bd6b6be..5c73644a2 100644 --- a/keyboards/novelpad/README.md +++ b/keyboards/novelpad/README.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make novelpad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/noxary/268/readme.md b/keyboards/noxary/268/readme.md index 68308a475..adc1add18 100644 --- a/keyboards/noxary/268/readme.md +++ b/keyboards/noxary/268/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make noxary/268:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md index 1b417a658..e3d75b448 100644 --- a/keyboards/nyquist/readme.md +++ b/keyboards/nyquist/readme.md @@ -15,6 +15,6 @@ Example of flashing this keyboard: make nyquist/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io) diff --git a/keyboards/ok60/readme.md b/keyboards/ok60/readme.md index de67ab628..014c30426 100644 --- a/keyboards/ok60/readme.md +++ b/keyboards/ok60/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make ok60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/omnikey_blackheart/readme.md b/keyboards/omnikey_blackheart/readme.md index e375d53f9..04bb49818 100644 --- a/keyboards/omnikey_blackheart/readme.md +++ b/keyboards/omnikey_blackheart/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make omnikey_blackheart:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/paladin64/readme.md b/keyboards/paladin64/readme.md index 41f66e2ac..8d62bb6b7 100644 --- a/keyboards/paladin64/readme.md +++ b/keyboards/paladin64/readme.md @@ -16,4 +16,4 @@ Or to make and flash: make paladin64:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md index c0cb3bc20..b25630958 100644 --- a/keyboards/phantom/readme.md +++ b/keyboards/phantom/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make phantom:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/planck/keymaps/phreed/readme.md b/keyboards/planck/keymaps/phreed/readme.md index c8fd93243..963740058 100644 --- a/keyboards/planck/keymaps/phreed/readme.md +++ b/keyboards/planck/keymaps/phreed/readme.md @@ -34,5 +34,5 @@ To flash the keyboard make planck/rev3:phreed:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the -[make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the +[make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/playkbtw/ca66/readme.md b/keyboards/playkbtw/ca66/readme.md index 9e1ff7397..c415efd5f 100644 --- a/keyboards/playkbtw/ca66/readme.md +++ b/keyboards/playkbtw/ca66/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make playkbtw/ca66:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/preonic/readme.md b/keyboards/preonic/readme.md index e116021fd..5b3c0ec58 100644 --- a/keyboards/preonic/readme.md +++ b/keyboards/preonic/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make preonic:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/quefrency/readme.md b/keyboards/quefrency/readme.md index 8fb1c6bc1..66d033b6b 100644 --- a/keyboards/quefrency/readme.md +++ b/keyboards/quefrency/readme.md @@ -17,6 +17,6 @@ Example of flashing this keyboard: Handedness detection is already hardwired onto the PCB, so no need to deal with `EE_HANDS` or flashing .eep files. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Keebio Build Guides](https://docs.keeb.io) diff --git a/keyboards/qwertyydox/readme.md b/keyboards/qwertyydox/readme.md index 1fa984e03..2314aac47 100644 --- a/keyboards/qwertyydox/readme.md +++ b/keyboards/qwertyydox/readme.md @@ -23,5 +23,5 @@ Example of flashing this keyboard: make qwertyydox/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/rama/m10_b/readme.md b/keyboards/rama/m10_b/readme.md index 6fb04c604..9facb5cd3 100644 --- a/keyboards/rama/m10_b/readme.md +++ b/keyboards/rama/m10_b/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make rama/m10_b:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/rorschach/readme.md b/keyboards/rorschach/readme.md index 537553720..8858b7214 100644 --- a/keyboards/rorschach/readme.md +++ b/keyboards/rorschach/readme.md @@ -15,6 +15,6 @@ Example of flashing this keyboard: make rorschach/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Iris Build Guide](https://docs.keeb.io/iris-build-guide.html) diff --git a/keyboards/s60_x/readme.md b/keyboards/s60_x/readme.md index ddb0d4ba6..1e4b4cc31 100644 --- a/keyboards/s60_x/readme.md +++ b/keyboards/s60_x/readme.md @@ -16,4 +16,4 @@ Make example for rgb version of this keyboard: make s60_x/rgb:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md index fddadcd47..a2552edf8 100644 --- a/keyboards/satan/readme.md +++ b/keyboards/satan/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make satan:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/scrabblepad/readme.md b/keyboards/scrabblepad/readme.md index e434eef95..0227b988f 100644 --- a/keyboards/scrabblepad/readme.md +++ b/keyboards/scrabblepad/readme.md @@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment): make scrabblepad:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/singa/readme.md b/keyboards/singa/readme.md index 7a374db25..bdde361a8 100644 --- a/keyboards/singa/readme.md +++ b/keyboards/singa/readme.md @@ -46,4 +46,4 @@ macOS: 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/sixkeyboard/readme.md b/keyboards/sixkeyboard/readme.md index 512b9a6af..6979e1d48 100644 --- a/keyboards/sixkeyboard/readme.md +++ b/keyboards/sixkeyboard/readme.md @@ -9,7 +9,7 @@ Make example for this keyboard (after setting up your build environment): make sixkeyboard:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Hardware Info diff --git a/keyboards/sixshooter/readme.md b/keyboards/sixshooter/readme.md index 18229bdbf..1fcf26a51 100644 --- a/keyboards/sixshooter/readme.md +++ b/keyboards/sixshooter/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make sixshooter:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/speedo/readme.md b/keyboards/speedo/readme.md index ee94623ac..882c16583 100644 --- a/keyboards/speedo/readme.md +++ b/keyboards/speedo/readme.md @@ -10,7 +10,7 @@ Make example for this keyboard (after setting up your build environment): make speedo:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Flashing the Firmware See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the *.hex* file to the Teensy 2.0 controller. diff --git a/keyboards/staryu/readme.md b/keyboards/staryu/readme.md index bca7482bc..1b2f9e8f5 100644 --- a/keyboards/staryu/readme.md +++ b/keyboards/staryu/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make staryu:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/sx60/readme.md b/keyboards/sx60/readme.md index 4b7f9e74a..e65363c5a 100644 --- a/keyboards/sx60/readme.md +++ b/keyboards/sx60/readme.md @@ -17,4 +17,4 @@ Or to make and flash: make SX60:default:dfu -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/tanuki/readme.md b/keyboards/tanuki/readme.md index 331df5b2e..129e2a951 100644 --- a/keyboards/tanuki/readme.md +++ b/keyboards/tanuki/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make tanuki:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/telophase/readme.md b/keyboards/telophase/readme.md index 86b29d01d..97bce57bb 100644 --- a/keyboards/telophase/readme.md +++ b/keyboards/telophase/readme.md @@ -9,7 +9,7 @@ Make example for this keyboard (after setting up your build environment): make telophase:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Mitosis Notes diff --git a/keyboards/tetris/readme.md b/keyboards/tetris/readme.md index b74740854..b2741caf1 100644 --- a/keyboards/tetris/readme.md +++ b/keyboards/tetris/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make tetris:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/the_ruler/readme.md b/keyboards/the_ruler/readme.md index 3573514b6..63a6ffeee 100644 --- a/keyboards/the_ruler/readme.md +++ b/keyboards/the_ruler/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make the_ruler:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/tkc1800/README.md b/keyboards/tkc1800/README.md index 7a0528ce3..4d1b8e0f2 100644 --- a/keyboards/tkc1800/README.md +++ b/keyboards/tkc1800/README.md @@ -15,4 +15,4 @@ Make example for this keyboard (after setting up your build environment): make tkc1800 -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/tokyo60/readme.md b/keyboards/tokyo60/readme.md index 3f6b3b76b..d0bc6e6ce 100644 --- a/keyboards/tokyo60/readme.md +++ b/keyboards/tokyo60/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): ​ make tokyo60:default ​ -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/tragicforce68/README.md b/keyboards/tragicforce68/README.md index c7a6cc77d..7cca1b505 100644 --- a/keyboards/tragicforce68/README.md +++ b/keyboards/tragicforce68/README.md @@ -15,4 +15,4 @@ Example of flashing this keyboard: make tragicforce68:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/uk78/readme.md b/keyboards/uk78/readme.md index 8a1ba5e8a..6592e38ec 100644 --- a/keyboards/uk78/readme.md +++ b/keyboards/uk78/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make uk78:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/v60_type_r/readme.md b/keyboards/v60_type_r/readme.md index c7039c2e7..06ff749b8 100644 --- a/keyboards/v60_type_r/readme.md +++ b/keyboards/v60_type_r/readme.md @@ -40,7 +40,7 @@ or make v60_type_r:vimouse -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/vinta/readme.md b/keyboards/vinta/readme.md index 193f36121..278c5e2c4 100644 --- a/keyboards/vinta/readme.md +++ b/keyboards/vinta/readme.md @@ -14,7 +14,7 @@ Make example for this keyboard (after setting up your build environment): make vinta:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. #### Developer's Note diff --git a/keyboards/vision_division/readme.md b/keyboards/vision_division/readme.md index 350ced334..72fdb9542 100644 --- a/keyboards/vision_division/readme.md +++ b/keyboards/vision_division/readme.md @@ -11,4 +11,4 @@ Make example for this keyboard (after setting up your build environment): make vision_division:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/viterbi/readme.md b/keyboards/viterbi/readme.md index 13f3e6056..9aad7896b 100644 --- a/keyboards/viterbi/readme.md +++ b/keyboards/viterbi/readme.md @@ -16,6 +16,6 @@ Example of flashing this keyboard: make viterbi/rev1:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Viterbi Build Guide](https://docs.keeb.io) diff --git a/keyboards/wavelet/readme.md b/keyboards/wavelet/readme.md index bacd57037..90c5ac808 100644 --- a/keyboards/wavelet/readme.md +++ b/keyboards/wavelet/readme.md @@ -15,6 +15,6 @@ Example of flashing this keyboard: make wavelet:default:avrdude -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. A build guide for this keyboard can be found here: [Levinson Build Guide](https://docs.keeb.io) diff --git a/keyboards/whitefox/readme.md b/keyboards/whitefox/readme.md index 2de1d4c7d..9b848a69d 100644 --- a/keyboards/whitefox/readme.md +++ b/keyboards/whitefox/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make whitefox:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md index 19c22dac6..24f07c47b 100644 --- a/keyboards/xd60/readme.md +++ b/keyboards/xd60/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make xd60:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/ymd75/README.md b/keyboards/ymd75/README.md index 6b1bce6a5..eed6ce13e 100644 --- a/keyboards/ymd75/README.md +++ b/keyboards/ymd75/README.md @@ -25,7 +25,7 @@ $ make ymd75:default:program It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. I've found that I need to remove the previous build/file before making a new one as it doesn't overwrite it; but this might just be my personal experience. -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md index beb5e13ac..0fb0ffb3b 100644 --- a/keyboards/zen/readme.md +++ b/keyboards/zen/readme.md @@ -17,4 +17,4 @@ Make example for this keyboard (after setting up your build environment): make zen/rev1:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/zlant/readme.md b/keyboards/zlant/readme.md index 8f50e6d4c..eaec14074 100644 --- a/keyboards/zlant/readme.md +++ b/keyboards/zlant/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make zlant:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. -- cgit v1.2.3-24-g4f1b