From 60b30c036397cb5627fa374bb930794b225daa29 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 7 Jul 2017 11:55:23 -0400 Subject: Squashed 'lib/lufa/' content from commit 385d40300 git-subtree-dir: lib/lufa git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b --- Demos/Device/LowLevel/MassStorage/MassStorage.c | 332 ++++++++++++++++++++++++ 1 file changed, 332 insertions(+) create mode 100644 Demos/Device/LowLevel/MassStorage/MassStorage.c (limited to 'Demos/Device/LowLevel/MassStorage/MassStorage.c') diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c new file mode 100644 index 000000000..f30969c67 --- /dev/null +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c @@ -0,0 +1,332 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the Mass Storage demo. This file contains the main tasks of the demo and + * is responsible for the initial application hardware configuration. + */ + +#define INCLUDE_FROM_MASSSTORAGE_C +#include "MassStorage.h" + +/** Structure to hold the latest Command Block Wrapper issued by the host, containing a SCSI command to execute. */ +MS_CommandBlockWrapper_t CommandBlock; + +/** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */ +MS_CommandStatusWrapper_t CommandStatus = { .Signature = MS_CSW_SIGNATURE }; + +/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */ +volatile bool IsMassStoreReset = false; + + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + MassStorage_Task(); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif + + /* Hardware Initialization */ + LEDs_Init(); + Dataflash_Init(); + USB_Init(); + + /* Check if the Dataflash is working, abort if not */ + if (!(DataflashManager_CheckDataflashOperation())) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); + } + + /* Clear Dataflash sector protections, if enabled */ + DataflashManager_ResetDataflashProtections(); +} + +/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */ +void EVENT_USB_Device_Connect(void) +{ + /* Indicate USB enumerating */ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + + /* Reset the MSReset flag upon connection */ + IsMassStoreReset = false; +} + +/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via + * the status LEDs and stops the Mass Storage management task. + */ +void EVENT_USB_Device_Disconnect(void) +{ + /* Indicate USB not ready */ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration + * of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started. + */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + /* Setup Mass Storage Data Endpoints */ + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); + + /* Indicate endpoint configuration success or failure */ + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to + * the device from the USB host before passing along unhandled control requests to the library for processing + * internally. + */ +void EVENT_USB_Device_ControlRequest(void) +{ + /* Process UFI specific control requests */ + switch (USB_ControlRequest.bRequest) + { + case MS_REQ_MassStorageReset: + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + Endpoint_ClearStatusStage(); + + /* Indicate that the current transfer should be aborted */ + IsMassStoreReset = true; + } + + break; + case MS_REQ_GetMaxLUN: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + + /* Indicate to the host the number of supported LUNs (virtual disks) on the device */ + Endpoint_Write_8(TOTAL_LUNS - 1); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + } +} + +/** Task to manage the Mass Storage interface, reading in Command Block Wrappers from the host, processing the SCSI commands they + * contain, and returning Command Status Wrappers back to the host to indicate the success or failure of the last issued command. + */ +void MassStorage_Task(void) +{ + /* Device must be connected and configured for the task to run */ + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + /* Process sent command block from the host if one has been sent */ + if (ReadInCommandBlock()) + { + /* Indicate busy */ + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + /* Check direction of command, select Data IN endpoint if data is from the device */ + if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN) + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); + + /* Decode the received SCSI command, set returned status code */ + CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail; + + /* Load in the CBW tag into the CSW to link them together */ + CommandStatus.Tag = CommandBlock.Tag; + + /* Load in the data residue counter into the CSW */ + CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength; + + /* Stall the selected data pipe if command failed (if data is still to be transferred) */ + if ((CommandStatus.Status == MS_SCSI_COMMAND_Fail) && (CommandStatus.DataTransferResidue)) + Endpoint_StallTransaction(); + + /* Return command status block to the host */ + ReturnCommandStatus(); + + /* Indicate ready */ + LEDs_SetAllLEDs(LEDMASK_USB_READY); + } + + /* Check if a Mass Storage Reset occurred */ + if (IsMassStoreReset) + { + /* Reset the data endpoint banks */ + Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPADDR); + Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPADDR); + + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); + Endpoint_ClearStall(); + Endpoint_ResetDataToggle(); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); + Endpoint_ClearStall(); + Endpoint_ResetDataToggle(); + + /* Clear the abort transfer flag */ + IsMassStoreReset = false; + } +} + +/** Function to read in a command block from the host, via the bulk data OUT endpoint. This function reads in the next command block + * if one has been issued, and performs validation to ensure that the block command is valid. + * + * \return Boolean \c true if a valid command block has been read in from the endpoint, \c false otherwise + */ +static bool ReadInCommandBlock(void) +{ + uint16_t BytesTransferred; + + /* Select the Data Out endpoint */ + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); + + /* Abort if no command has been sent from the host */ + if (!(Endpoint_IsOUTReceived())) + return false; + + /* Read in command block header */ + BytesTransferred = 0; + while (Endpoint_Read_Stream_LE(&CommandBlock, (sizeof(CommandBlock) - sizeof(CommandBlock.SCSICommandData)), + &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer) + { + /* Check if the current command is being aborted by the host */ + if (IsMassStoreReset) + return false; + } + + /* Verify the command block - abort if invalid */ + if ((CommandBlock.Signature != MS_CBW_SIGNATURE) || + (CommandBlock.LUN >= TOTAL_LUNS) || + (CommandBlock.Flags & 0x1F) || + (CommandBlock.SCSICommandLength == 0) || + (CommandBlock.SCSICommandLength > sizeof(CommandBlock.SCSICommandData))) + { + /* Stall both data pipes until reset by host */ + Endpoint_StallTransaction(); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); + Endpoint_StallTransaction(); + + return false; + } + + /* Read in command block command data */ + BytesTransferred = 0; + while (Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData, CommandBlock.SCSICommandLength, + &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer) + { + /* Check if the current command is being aborted by the host */ + if (IsMassStoreReset) + return false; + } + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearOUT(); + + return true; +} + +/** Returns the filled Command Status Wrapper back to the host via the bulk data IN endpoint, waiting for the host to clear any + * stalled data endpoints as needed. + */ +static void ReturnCommandStatus(void) +{ + uint16_t BytesTransferred; + + /* Select the Data Out endpoint */ + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); + + /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ + while (Endpoint_IsStalled()) + { + /* Check if the current command is being aborted by the host */ + if (IsMassStoreReset) + return; + } + + /* Select the Data In endpoint */ + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); + + /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ + while (Endpoint_IsStalled()) + { + /* Check if the current command is being aborted by the host */ + if (IsMassStoreReset) + return; + } + + /* Write the CSW to the endpoint */ + BytesTransferred = 0; + while (Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus), + &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer) + { + /* Check if the current command is being aborted by the host */ + if (IsMassStoreReset) + return; + } + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); +} + -- cgit v1.2.3-24-g4f1b