From c9ca36800884f63cf67d55565824bad0cb6d9be3 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 26 Jan 2017 01:52:43 -0500 Subject: replace jackhumbert with qmk --- doc/PCB_GUIDE.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'doc/PCB_GUIDE.md') diff --git a/doc/PCB_GUIDE.md b/doc/PCB_GUIDE.md index 3fad41dfb..16de71114 100644 --- a/doc/PCB_GUIDE.md +++ b/doc/PCB_GUIDE.md @@ -5,7 +5,7 @@ ### Windows 1. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. 2. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. -3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. +3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. 4. Right-click on the 1-setup-path-win batch script, select "Run as administrator", and accept the User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. 5. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! @@ -32,7 +32,7 @@ Note that, since it will be directly accessing USB hardware, the `dfu-programmer` program needs to be run as root. ## Verify Your Installation -1. Clone the following repository: https://github.com/jackhumbert/qmk_firmware +1. Clone the following repository: https://github.com/qmk/qmk_firmware 2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck` 3. Run `make`. This should output a lot of information about the build process. @@ -80,7 +80,7 @@ when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to ### Keymap -Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/jackhumbert/qmk_firmware/blob/master/quantum/keymap_common.h). +Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/qmk/qmk_firmware/blob/master/quantum/keymap_common.h). You can use modifiers with keycodes like this: -- cgit v1.2.3-24-g4f1b