From 3c257c1c6e1685a2ce37951c26d13bcb8fad749d Mon Sep 17 00:00:00 2001 From: Danny Date: Fri, 15 Mar 2019 17:05:50 -0400 Subject: Add avrdude split EE_HANDS flash commands (#5414) * Add EEPROM avrdude flashing commands for setting handedness * Update docs with info on flashing EEPROM handedness files with commands --- docs/config_options.md | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'docs/config_options.md') diff --git a/docs/config_options.md b/docs/config_options.md index 336feee8f..a8a106459 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -208,9 +208,13 @@ There are a few different ways to set handedness for split keyboards (listed in 1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side 2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half + * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files + * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right` 3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default) 4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half +#### Defines for handedness + * `#define SPLIT_HAND_PIN B7` * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses. -- cgit v1.2.3-24-g4f1b