From af37bb2f78c39c224c995eb57c757c63034a3d9c Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 9 Dec 2017 16:49:07 +1100 Subject: Fix some of the more obvious typos --- docs/faq_debug.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'docs/faq_debug.md') diff --git a/docs/faq_debug.md b/docs/faq_debug.md index 9dfec773f..25226102d 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -11,7 +11,7 @@ When debug console of your device is not ready you will see like this: Waiting for device:......... ``` -once the device is pluged in then *hid_listen* finds it you will get this message: +once the device is plugged in then *hid_listen* finds it you will get this message: ``` Waiting for new device:......................... @@ -82,23 +82,23 @@ Size after: consume extra memory; watch out for BOOTMAGIC_ENABLE, MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE - DFU tools do /not/ allow you to write into the bootloader (unless - you throw in extra fruitsalad of options), so there is little risk + you throw in extra fruit salad of options), so there is little risk there. - EEPROM has around a 100000 write cycle. You shouldn't rewrite the firmware repeatedly and continually; that'll burn the EEPROM eventually. ## NKRO Doesn't work -First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**. +First you have to compile firmware with this build option `NKRO_ENABLE` in **Makefile**. Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS. -If your firmware built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and keeped over power cycles. +If your firmware built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and kept over power cycles. https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch ## TrackPoint Needs Reset Circuit (PS/2 Mouse Support) -Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754. +Without reset circuit you will have inconsistent result due to improper initialize of the hardware. See circuit schematic of TPM754. - http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447 - http://www.mikrocontroller.net/attachment/52583/tpm754.pdf @@ -107,7 +107,7 @@ Without reset circuit you will have inconsistent reuslt due to improper initiali ## Can't Read Column of Matrix Beyond 16 Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16. -In C `1` means one of [int] type which is [16bit] in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use [unsigned long] type with `1UL`. +In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use [unsigned long] type with `1UL`. http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 @@ -181,11 +181,11 @@ Pressing any key during sleep should wake host. - http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf - http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf -Arduino leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem. +Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem. ## Using PF4-7 Pins of USB AVR? -You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affeteced with this. +You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affected with this. If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function. -- cgit v1.2.3-24-g4f1b