From 9b879b1267cd5cbebf4d73595c7ca4ed52fe5ef4 Mon Sep 17 00:00:00 2001 From: skullY Date: Sun, 6 Aug 2017 17:51:42 -0700 Subject: break up keymaps and quantum keycodes into files by feature --- docs/quantum_keycodes.md | 340 +---------------------------------------------- 1 file changed, 4 insertions(+), 336 deletions(-) (limited to 'docs/quantum_keycodes.md') diff --git a/docs/quantum_keycodes.md b/docs/quantum_keycodes.md index 0f2b8e72f..2e17ae4b7 100644 --- a/docs/quantum_keycodes.md +++ b/docs/quantum_keycodes.md @@ -1,8 +1,10 @@ # Quantum Keycodes +Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions. + All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification. -On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are used to implement advanced quantum features. If you define your own custom keycodes they will be put into this range as well. Keycodes above `0x00FF` may not be used with any of the mod/layer-tap keys listed +On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are used to implement advanced quantum features. If you define your own custom keycodes they will be put into this range as well. ## QMK keycodes @@ -14,341 +16,7 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are |`KC_LSPO`|Left shift when held, open paranthesis when tapped| |`KC_RSPC`|Right shift when held, close paranthesis when tapped| |`KC_LEAD`|The [leader key](leader_key.md)| +|`KC_LOCK`|The [lock key](key_lock.md)| |`FUNC(n)`/`F(n)`|Call `fn_action(n)`| |`M(n)`|to call macro n| |`MACROTAP(n)`|to macro-tap n idk FIXME| -|`KC_LOCK`|The [lock key](key_lock.md)| - -## Bootmagic Keycodes - -Shortcuts for bootmagic options (these work even when bootmagic is off.) - -|Name|Description| -|----|-----------| -|`MAGIC_SWAP_CONTROL_CAPSLOCK`|Swap Capslock and Left Control| -|`MAGIC_CAPSLOCK_TO_CONTROL`|Treat Capslock like a Control Key| -|`MAGIC_SWAP_LALT_LGUI`|Swap the left Alt and GUI keys| -|`MAGIC_SWAP_RALT_RGUI`|Swap the right Alt and GUI keys| -|`MAGIC_NO_GUI`|Disable the GUI key| -|`MAGIC_SWAP_GRAVE_ESC`|Swap the Grave and Esc key.| -|`MAGIC_SWAP_BACKSLASH_BACKSPACE`|Swap backslack and backspace| -|`MAGIC_HOST_NKRO`|Force NKRO on| -|`MAGIC_SWAP_ALT_GUI`/`AG_SWAP`|Swap Alt and Gui on both sides| -|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`|Disable the Control/Capslock swap| -|`MAGIC_UNCAPSLOCK_TO_CONTROL`|Disable treating Capslock like Control | -|`MAGIC_UNSWAP_LALT_LGUI`|Disable Left Alt and GUI switching| -|`MAGIC_UNSWAP_RALT_RGUI`|Disable Right Alt and GUI switching| -|`MAGIC_UNNO_GUI`|Enable the GUI key | -|`MAGIC_UNSWAP_GRAVE_ESC`|Disable the Grave/Esc swap | -|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|Disable the backslash/backspace swap| -|`MAGIC_UNHOST_NKRO`|Force NKRO off| -|`MAGIC_UNSWAP_ALT_GUI`/`AG_NORM`|Disable the Alt/GUI switching| -|`MAGIC_TOGGLE_NKRO`|Turn NKRO on or off| - - - -## Backlight - -These keycodes control the backlight. Most keyboards use this for single color in-switch lighting. - -|Name|Description| -|----|-----------| -|`BL_x`|Set a specific backlight level between 0-9| -|`BL_ON`|An alias for `BL_9`| -|`BL_OFF`|An alias for `BL_0`| -|`BL_DEC`|Turn the backlight level down by 1| -|`BL_INC`|Turn the backlight level up by 1| -|`BL_TOGG`|Toggle the backlight on or off| -|`BL_STEP`|Step through backlight levels, wrapping around to 0 when you reach the top.| - -## RGBLIGHT WS2818 LEDs - -This controls the `RGBLIGHT` functionality. Most keyboards use WS2812 (and compatible) LEDs for underlight or case lighting. - -|Name|Description| -|----|-----------| -|`RGB_TOG`|toggle on/off| -|`RGB_MOD`|cycle through modes| -|`RGB_HUI`|hue increase| -|`RGB_HUD`|hue decrease| -|`RGB_SAI`|saturation increase| -|`RGB_SAD`|saturation decrease| -|`RGB_VAI`|value increase| -|`RGB_VAD`|value decrease| - -## Thermal Printer (experimental) - -|Name|Description| -|----|-----------| -|`PRINT_ON`|Start printing everything the user types| -|`PRINT_OFF`|Stop printing everything the user types| - -## Keyboard output selection - -This is used when multiple keyboard outputs can be selected. Currently this only allows for switching between USB and Bluetooth on keyboards that support both. - -|Name|Description| -|----|-----------| -|`OUT_AUTO`|auto mode| -|`OUT_USB`|usb only| -|`OUT_BT`|bluetooth (when `BLUETOOTH_ENABLE`)| - -## Modifiers - -These are special keycodes that simulate pressing several modifiers at once. - -|Name|Description| -|----|-----------| -|`KC_HYPR`|Hold down LCTL + LSFT + LALT + LGUI| -|`KC_MEH`|Hold down LCTL + LSFT + LALT| - -/* FIXME: Should we have these in QMK too? - * |`KC_LCAG`|`LCTL` + `LALT` + `LGUI`| - * |`KC_ALTG`|`RCTL` + `RALT`| - * |`KC_SCMD`/`KC_SWIN`|`LGUI` + `LSFT`| - * |`KC_LCA`|`LCTL` + `LALT`| - */ - -### Modifiers with keys - -|Name|Description| -|----|-----------| -|`LCTL(kc)`|`LCTL` + `kc`| -|`LSFT(kc)`/`S(kc)`|`LSFT` + `kc`| -|`LALT(kc)`|`LALT` + `kc`| -|`LGUI(kc)`|`LGUI` + `kc`| -|`RCTL(kc)`|`RCTL` + `kc`| -|`RSFT(kc)`|`RSFT` + `kc`| -|`RALT(kc)`|`RALT` + `kc`| -|`RGUI(kc)`|`RGUI` + `kc`| -|`HYPR(kc)`|`LCTL` + `LSFT` + `LALT` + `LGUI` + `kc`| -|`MEH(kc)`|`LCTL` + `LSFT` + `LALT` + `kc`| -|`LCAG(kc)`|`LCTL` + `LALT` + `LGUI` + `kc`| -|`ALTG(kc)`|`RCTL` + `RALT` + `kc`| -|`SCMD(kc)`/`SWIN(kc)`|`LGUI` + `LSFT` + `kc`| -|`LCA(kc)`|`LCTL` + `LALT` + `kc`| - -### One Shot Keys - -Most modifiers work by being held down while you push another key. You can use `OSM()` to setup a "One Shot" modifier. When you tap a one shot mod it will remain is a pressed state until you press another key. - -To specify a your modifier you need to pass the `MOD` form of the key. For example, if you want to setup a One Shot Control you would use `OSM(MOD_LCTL)`. - -|Name|Description| -|----|-----------| -|`OSM(mod)`|use mod for one keypress| -|`OSL(layer)`|switch to layer for one keypress| - -### Mod-tap keys - -These keycodes will press the mod(s) when held, and the key when tapped. They only work with [basic keycodes](basic_keycodes.md). - -|Name|Description| -|----|-----------| -|`CTL_T(kc)`/`LCTL_T(kc)`|`LCTL` when held, `kc` when tapped| -|`RCTL_T(kc)`|`RCTL` when held, `kc` when tapped| -|`SFT_T(kc)`/`LSFT_T(kc)`|`LSFT` when held, `kc` when tapped| -|`RSFT_T(kc)`|`RSFT` when held, `kc` when tapped| -|`ALT_T(kc)`/`LALT_T(kc)`|`LALT` when held, `kc` when tapped| -|`RALT_T(kc)`/`ALGR_T(kc)`|`RALT` when held, `kc` when tapped| -|`GUI_T(kc)`/`LGUI_T(kc)`|`LGUI` when held, `kc` when tapped| -|`RGUI_T(kc)`|`RGUI` when held, `kc` when tapped| -|`C_S_T(kc)`|`LCTL` + `LSFT` when held, `kc` when tapped| -|`MEH_T(kc)`|`LCTL` + `LSFT` + `LALT` when held, `kc` when tapped| -|`LCAG_T(kc)`|`LCTL` + `LALT` + `LGUI` when held, `kc` when tapped| -|`RCAG_T(kc)`|`RCTL` + `RALT` + `RGUI` when held, `kc` when tapped| -|`ALL_T(kc)`|`LCTL` + `LSFT` + `LALT` + `LGUI` when held, `kc` when tapped [more info](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| -|`SCMD_T(kc)`/`SWIN_T(kc)`|`LGUI` + `LSFT` when held, `kc` when tapped| -|`LCA_T(kc)`|`LCTL` + `LALT` when held, `kc` when tapped| - -## US ANSI Shifted symbols - -These keycodes correspond to characters that are "shifted" on a standard US ANSI keyboards. They do not have dedicated keycodes but are instead typed by holding down shift and then sending a keycode. - -It's important to remember that all of these keycodes send a left shift - this may cause unintended actions if unaccounted for. The short code is preferred in most situations. - -|Short Name|Long Name|Description| -|----------|---------|-----------| -|`KC_TILD`|`KC_TILDE`|tilde `~`| -|`KC_EXLM`|`KC_EXCLAIM`|exclamation mark `!`| -|`KC_AT`||at sign `@`| -|`KC_HASH`||hash sign `#`| -|`KC_DLR`|`KC_DOLLAR`|dollar sign `$`| -|`KC_PERC`|`KC_PERCENT`|percent sign `%`| -|`KC_CIRC`|`KC_CIRCUMFLEX`|circumflex `^`| -|`KC_AMPR`|`KC_AMPERSAND`|ampersand `&`| -|`KC_ASTR`|`KC_ASTERISK`|asterisk `*`| -|`KC_LPRN`|`KC_LEFT_PAREN`|left parenthesis `(`| -|`KC_RPRN`|`KC_RIGHT_PAREN`|right parenthesis `)`| -|`KC_UNDS`|`KC_UNDERSCORE`|underscore `_`| -|`KC_PLUS`||plus sign `+`| -|`KC_LCBR`|`KC_LEFT_CURLY_BRACE`|left curly brace `{`| -|`KC_RCBR`|`KC_RIGHT_CURLY_BRACE`|right curly brace `}`| -|`KC_LT`/`KC_LABK`|`KC_LEFT_ANGLE_BRACKET`|left angle bracket `<`| -|`KC_GT`/`KC_RABK`|`KC_RIGHT_ANGLE_BRACKET`|right angle bracket `>`| -|`KC_COLN`|`KC_COLON`|colon `:`| -|`KC_PIPE`||pipe `\|`| -|`KC_QUES`|`KC_QUESTION`|question mark `?`| -|`KC_DQT`/`KC_DQUO`|`KC_DOUBLE_QUOTE`|double quote `"`| - -## Layer Changes - -These are keycodes that can be used to change the current layer. - -|Name|Description| -|----|-----------| -|`LT(layer, kc)`|turn on layer (0-15) when held, kc ([basic keycodes](basic_keycodes.md)) when tapped| -|`TO(layer)`|turn on layer when depressed| -|`MO(layer)`|momentarily turn on layer when depressed (requires `KC_TRNS` on destination layer)| -|`DF(layer)`|sets the base (default) layer| -|`TG(layer)`|toggle layer on/off| -|`TT(layer)`|tap toggle? idk FIXME| -|`OSL(layer)`|switch to layer for one keycode| - -## Unicode - -These keycodes can be used in conjuction with the [Unicode](unicode_and_additional_language_support.md) support. - -|`UNICODE(n)`/`UC(n)`|if `UNICODE_ENABLE`, this will send characters up to `0x7FFF`| -|`X(n)`|if `UNICODEMAP_ENABLE`, also sends unicode via a different method| - -# `SAFE_RANGE`, or safely defining custom keycodes - -Sometimes you want to define your own custom keycodes to make your keymap easier to read. QMK provides `SAFE_RANGE` to help you do that. `SAFE_RANGE` is the first available keycode in the `0x0000`-`0xFFFF` range and you can use it when creating your own custom keycode enum: - -``` -enum my_keycodes { - FOO = SAFE_RANGE, - BAR -}; -``` - -You can then use `process_record_user()` to do something with your keycode: - -``` -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case FOO: - // Do something here - break; - case BAR: - // Do something here - break; - } -} -``` -- cgit v1.2.3-24-g4f1b