From 0a645225b9c863a106921185a6c2e0c340f10694 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Mon, 15 Apr 2019 22:32:57 -0500 Subject: OLED Driver Feature --- docs/feature_oled_driver.md | 246 ++++++++++++++++++++++++++++++++++++++++++++ docs/hardware_drivers.md | 6 +- 2 files changed, 249 insertions(+), 3 deletions(-) create mode 100644 docs/feature_oled_driver.md (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md new file mode 100644 index 000000000..f261bbef1 --- /dev/null +++ b/docs/feature_oled_driver.md @@ -0,0 +1,246 @@ +# OLED Driver + +## OLED Supported Hardware + +128x32 OLED modules using SSD1306 driver IC over I2C. Supported on AVR based keyboards. Possible but untested hardware includes ARM based keyboards and other sized OLED modules using SSD1306 over I2C, such as 128x64. + +!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. + +## Usage + +To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to set `OLED_DRIVER_ENABLE=yes` in `rules.mk`, e.g.: + +``` +BOOTMAGIC_ENABLE = no +MOUSEKEY_ENABLE = no +STENO_ENABLE = no +EXTRAKEY_ENABLE = yes +OLED_DRIVER_ENABLE = yes +``` + +This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keymap.c` file, you will need to implement the user task call, e.g: + +```C++ +#ifdef OLED_DRIVER_ENABLE +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (biton32(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _FN: + oled_write_P(PSTR("FN\n"), false); + break; + case _ADJ: + oled_write_P(PSTR("ADJ\n"), false); + break; + default: + // Or use the write_ln shortcut + oled_write_P(PSTR("Undefined\n"), false); + } + + // Host Keyboard LED Status + uint8_t led_usb_state = host_keyboard_leds(); + oled_write_P(led_usb_state & (1<Requires user to implement the below defines. | +|`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. | +|`OLED_DISPLAY_HEIGHT` |`32` |The height of the OLED display. | +|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`| +|`OLED_BLOCK_TYPE` |`uint8_t` |The unsigned integer type to use for dirty rendering.| +|`OLED_BLOCK_COUNT` |`8` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| +|`OLED_BLOCK_SIZE` |`64` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| +|`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. | +|`OLED_TARGET_MAP` |`{ 48, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | + + +### 90 Degree Rotation - Technical Mumbo Jumbo + + OLED displays driven by SSD1306 drivers only natively support in hard ware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an `atmega32u4` board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms. + + 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the default 128x32 implementation we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g: + +| | | | | | | +|---|---|---|---|---|---| +| 0 | 1 | | | | | +| 2 | 3 | | | | | +| 4 | 5 | | | | | +| 6 | 7 | | | | | + +However the local buffer is stored as if it was Height x Width display instead of Width x Height, e.g: + +| | | | | | | +|---|---|---|---|---|---| +| 3 | 7 | | | | | +| 2 | 6 | | | | | +| 1 | 5 | | | | | +| 0 | 4 | | | | | + +So those precalculated arrays just index the memory offsets in the order in which each one iterates its data. + +## OLED API + +```C++ +// Initialize the OLED display, rotating the rendered output 180 degrees if true. +// Returns true if the OLED was initialized successfully +bool oled_init(bool flip180); + +// Called at the start of oled_init, weak function overridable by the user +// flip180 - the value passed into oled_init +// Return true if you want the oled to be flip180 +bool oled_init_user(bool flip180); + +// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering +void oled_clear(void); + +// Renders the dirty chunks of the buffer to OLED display +void oled_render(void); + +// Moves cursor to character position indicated by column and line, wraps if out of bounds +// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions +void oled_set_cursor(uint8_t col, uint8_t line); + +// Advances the cursor to the next page, writing ' ' if true +// Wraps to the begining when out of bounds +void oled_advance_page(bool clearPageRemainder); + +// Moves the cursor forward 1 character length +// Advance page if there is not enough room for the next character +// Wraps to the begining when out of bounds +void oled_advance_char(void); + +// Writes a single character to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +void oled_write(const char *data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +void oled_write_ln(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM +void oled_write_P(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM +void oled_write_ln_P(const char *data, bool invert); + +// Can be used to manually turn on the screen if it is off +// Returns true if the screen was on or turns on +bool oled_on(void); + +// Can be used to manually turn off the screen if it is on +// Returns true if the screen was off or turns off +bool oled_off(void); + +// Basically it's oled_render, but with timeout management and oled_task_user calling! +void oled_task(void); + +// Called at the start of oled_task, weak function overridable by the user +void oled_task_user(void); + +// Scrolls the entire display right +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_right(void); + +// Scrolls the entire display left +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_left(void); + +// Turns off display scrolling +// Returns true if the screen was not scrolling or stops scrolling +bool oled_scroll_off(void); + +// Returns the maximum number of characters that will fit on a line +uint8_t oled_max_chars(void); + +// Returns the maximum number of lines that will fit on the oled +uint8_t oled_max_lines(void); +``` + +## SSD1306.h driver conversion guide + +|Old API |Recommended New API | +|---------------------------|-----------------------------------| +|`struct CharacterMatrix` |*removed - delete all references* | +|`iota_gfx_init` |`oled_init` | +|`iota_gfx_on` |`oled_on` | +|`iota_gfx_off` |`oled_off` | +|`iota_gfx_flush` |`oled_render` | +|`iota_gfx_write_char` |`oled_write_char` | +|`iota_gfx_write` |`oled_write` | +|`iota_gfx_write_P` |`oled_write_P` | +|`iota_gfx_clear_screen` |`oled_clear` | +|`matrix_clear` |*removed - delete all references* | +|`matrix_write_char_inner` |`oled_write_char` | +|`matrix_write_char` |`oled_write_char` | +|`matrix_write` |`oled_write` | +|`matrix_write_ln` |`oled_write_ln` | +|`matrix_write_P` |`oled_write_P` | +|`matrix_write_ln_P` |`oled_write_ln_P` | +|`matrix_render` |`oled_render` | +|`iota_gfx_task` |`oled_task` | +|`iota_gfx_task_user` |`oled_task_user` | diff --git a/docs/hardware_drivers.md b/docs/hardware_drivers.md index 4c1266f22..023e92982 100644 --- a/docs/hardware_drivers.md +++ b/docs/hardware_drivers.md @@ -14,9 +14,9 @@ QMK is used on a lot of different hardware. While support for the most common MC Support for addressing pins on the ProMicro by their Arduino name rather than their AVR name. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. -## SSD1306 (AVR Only) +## SSD1306 OLED Driver -Support for SSD1306 based OLED displays. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. +Support for SSD1306 based OLED displays. For more information see the [OLED Driver Feature](feature_oled_driver.md) page. ## uGFX @@ -32,4 +32,4 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in ## IS31FL3733 -Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page. \ No newline at end of file +Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page. -- cgit v1.2.3-24-g4f1b