From c5780647d8f95fc8c51e2864498fa602c49c90e5 Mon Sep 17 00:00:00 2001 From: Joe Wasson Date: Thu, 27 Jul 2017 12:08:26 -0700 Subject: Fix typo in docs. --- docs/stenography.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/stenography.md b/docs/stenography.md index 11fa85126..fcac51201 100644 --- a/docs/stenography.md +++ b/docs/stenography.md @@ -47,7 +47,7 @@ void matrix_init_user() { Once you have your keyboard flashed launch Plover. Click the 'Configure...' button. In the 'Machine' tab select the Stenotype Machine that corresponds to your desired protocol. Click the 'Configure...' button on this tab and enter the serial port or click 'Scan'. Baud rate is fine at 9600 (although you should be able to set as high as 115200 with no issues). Use the default settings for everything else (Data Bits: 8, Stop Bits: 1, Parity: N, no flow control). -On the display tab click 'Open stroke display'. With Plover disables you should be able to hit keys on your keyboard and see them show up in the stroke display window. Use this to make sure you have set up your keymap correctly. You are now ready to steno! +On the display tab click 'Open stroke display'. With Plover disabled you should be able to hit keys on your keyboard and see them show up in the stroke display window. Use this to make sure you have set up your keymap correctly. You are now ready to steno! ## Learning Stenography -- cgit v1.2.3-24-g4f1b