From 099701dd3130d433244b3a4102f36f547aec25ae Mon Sep 17 00:00:00 2001
From: tmk <hasu@tmk-kbd.com>
Date: Fri, 16 Jan 2015 10:21:18 +0900
Subject: hhkb: Integrate RN-42 support, remove hhkb_rn42

---
 keyboard/hhkb_rn42/config.h | 112 --------------------------------------------
 1 file changed, 112 deletions(-)
 delete mode 100644 keyboard/hhkb_rn42/config.h

(limited to 'keyboard/hhkb_rn42/config.h')

diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h
deleted file mode 100644
index 21e73f1c5..000000000
--- a/keyboard/hhkb_rn42/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4242
-#define DEVICE_VER      0x0104
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         HHKB mod
-#define DESCRIPTION     t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#ifdef HHKB_JP
-#   define MATRIX_ROWS 16
-#else
-#   define MATRIX_ROWS 8
-#endif
-#define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) 
-
-
-/* period of tapping(ms) */
-#define TAPPING_TERM    300
-/* tap count needed for toggling a feature */
-#define TAPPING_TOGGLE  5
-/* Oneshot timeout(ms) */
-#define ONESHOT_TIMEOUT 300
-
-/* Boot Magic salt key: Space */
-#define BOOTMAGIC_KEY_SALT      KC_FN6
-
-/* power control of key switch board */
-#define HHKB_POWER_SAVING
-
-/*
- * Hardware Serial(UART)
- *     Baud rate are calculated with round off(+0.5).
- */
-#ifdef __AVR_ATmega32U4__
-    /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
-    #define UCSR1D _SFR_MEM8(0xCB)
-    #define RTSEN 0
-    #define CTSEN 1
-
-    #define SERIAL_UART_BAUD        115200
-    #define SERIAL_UART_DATA        UDR1
-    #define SERIAL_UART_UBRR        ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
-    #define SERIAL_UART_RXD_VECT    USART1_RX_vect
-    #define SERIAL_UART_TXD_READY   (UCSR1A&(1<<UDRE1))
-    #define SERIAL_UART_INIT()      do { \
-        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
-        UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8);  /* baud rate */ \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
-        UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
-        UCSR1C |= (0<<UPM11) | (0<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
-        UCSR1D |= (0<<RTSEN) | (0<<CTSEN);  /* RTS, CTS(no flow control by hardware) */ \
-        DDRD |= (1<<5); PORTD &= ~(1<<5);   /* RTS for flow control by firmware */ \
-        sei(); \
-    } while(0)
-    #define SERIAL_UART_RTS_LO()    do { PORTD &= ~(1<<5); } while (0)
-    #define SERIAL_UART_RTS_HI()    do { PORTD |=  (1<<5); } while (0)
-#else
-    #error "USART configuration is needed."
-#endif
-
-
-/* for debug */
-#define SUART_OUT_PORT  PORTD
-#define SUART_OUT_BIT   0
-#define SUART_IN_PIN    PIND
-#define SUART_IN_BIT    1
-
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
-- 
cgit v1.2.3-24-g4f1b