From b0805e38b9389ff79e4ba9b4e35ec08b18f7a728 Mon Sep 17 00:00:00 2001 From: LEdiodes Date: Sun, 28 Jan 2018 14:58:42 -0600 Subject: added ATOM47 (Vortex Core QMK powered PCB) & DZ60 Custom config(LEdiodes) (#2310) * added ATOM47 (Vortex Core QMK powered PCB) * fixed broken\unfinished comment block * moved Layer template to default template. * moved Layer template to default template and removed template from the keymap.c file. * Added LEdiodes config * created readme.md contains an image of 60% board(LEdiodes). * updated readme.md with images added images of the PCB and some feature details from https://geekhack.org/index.php?topic=93447.msg2545221#msg2545221 * removed excess words. * followed the readme template to a T. * formatting fix : added a return. --- keyboards/atom47/atom47.c | 31 +++++++++++++ keyboards/atom47/atom47.h | 25 ++++++++++ keyboards/atom47/config.h | 73 ++++++++++++++++++++++++++++++ keyboards/atom47/keymaps/LEdiodes/atom47.c | 31 +++++++++++++ keyboards/atom47/keymaps/LEdiodes/atom47.h | 25 ++++++++++ keyboards/atom47/keymaps/LEdiodes/config.h | 73 ++++++++++++++++++++++++++++++ keyboards/atom47/keymaps/LEdiodes/keymap.c | 35 ++++++++++++++ keyboards/atom47/keymaps/LEdiodes/rules.mk | 65 ++++++++++++++++++++++++++ keyboards/atom47/keymaps/default/keymap.c | 39 ++++++++++++++++ keyboards/atom47/keymaps/default/readme.md | 10 ++++ keyboards/atom47/readme.md | 28 ++++++++++++ keyboards/atom47/rules.mk | 65 ++++++++++++++++++++++++++ 12 files changed, 500 insertions(+) create mode 100644 keyboards/atom47/atom47.c create mode 100644 keyboards/atom47/atom47.h create mode 100644 keyboards/atom47/config.h create mode 100644 keyboards/atom47/keymaps/LEdiodes/atom47.c create mode 100644 keyboards/atom47/keymaps/LEdiodes/atom47.h create mode 100644 keyboards/atom47/keymaps/LEdiodes/config.h create mode 100644 keyboards/atom47/keymaps/LEdiodes/keymap.c create mode 100644 keyboards/atom47/keymaps/LEdiodes/rules.mk create mode 100644 keyboards/atom47/keymaps/default/keymap.c create mode 100644 keyboards/atom47/keymaps/default/readme.md create mode 100644 keyboards/atom47/readme.md create mode 100644 keyboards/atom47/rules.mk (limited to 'keyboards/atom47') diff --git a/keyboards/atom47/atom47.c b/keyboards/atom47/atom47.c new file mode 100644 index 000000000..7b839e796 --- /dev/null +++ b/keyboards/atom47/atom47.c @@ -0,0 +1,31 @@ +#include "atom47.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB &= ~(1<<5); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Vortex +#define PRODUCT Core +#define DESCRIPTION Atom47 PCB for the Vortex Core + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B1,B2,B3,B7} +#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +#endif + +#define RGB_DI_PIN D0 // The pin the LED strip is connected to +#define RGBLED_NUM 1 // Number of LEDs in your strip + +#define QMK_ESC_OUTPUT D7 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED B6 \ No newline at end of file diff --git a/keyboards/atom47/keymaps/LEdiodes/atom47.c b/keyboards/atom47/keymaps/LEdiodes/atom47.c new file mode 100644 index 000000000..7b839e796 --- /dev/null +++ b/keyboards/atom47/keymaps/LEdiodes/atom47.c @@ -0,0 +1,31 @@ +#include "atom47.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB &= ~(1<<5); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Vortex +#define PRODUCT Core +#define DESCRIPTION Atom47 PCB for the Vortex Core + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B1,B2,B3,B7} +#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +#endif + +#define RGB_DI_PIN D0 // The pin the LED strip is connected to +#define RGBLED_NUM 1 // Number of LEDs in your strip + +#define QMK_ESC_OUTPUT D7 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED B6 \ No newline at end of file diff --git a/keyboards/atom47/keymaps/LEdiodes/keymap.c b/keyboards/atom47/keymaps/LEdiodes/keymap.c new file mode 100644 index 000000000..3ea8609b6 --- /dev/null +++ b/keyboards/atom47/keymaps/LEdiodes/keymap.c @@ -0,0 +1,35 @@ +#include QMK_KEYBOARD_H + +// These are all aliases for the function layers. +#define _L0 0 +#define _L1 1 +#define _L2 2 +#define _L3 3 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_L0] = KEYMAP_ANSI( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \ + KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \ + +[_L2] = KEYMAP_ANSI( + _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ + _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L1] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L3] = KEYMAP_ANSI( + _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \ +}; diff --git a/keyboards/atom47/keymaps/LEdiodes/rules.mk b/keyboards/atom47/keymaps/LEdiodes/rules.mk new file mode 100644 index 000000000..d446d3a69 --- /dev/null +++ b/keyboards/atom47/keymaps/LEdiodes/rules.mk @@ -0,0 +1,65 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/atom47/keymaps/default/keymap.c b/keyboards/atom47/keymaps/default/keymap.c new file mode 100644 index 000000000..cd8e622f2 --- /dev/null +++ b/keyboards/atom47/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _FN 1 //Fn +#define _FN1 2 //Fn1 +#define _PN 3 //Pn + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = KEYMAP_ANSI( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \ + KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \ + +[_FN] = KEYMAP_ANSI( + _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ + _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_FN1] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_PN] = KEYMAP_ANSI( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), +}; \ No newline at end of file diff --git a/keyboards/atom47/keymaps/default/readme.md b/keyboards/atom47/keymaps/default/readme.md new file mode 100644 index 000000000..02422eb97 --- /dev/null +++ b/keyboards/atom47/keymaps/default/readme.md @@ -0,0 +1,10 @@ +To be updated... + + +// This layer is just a blank template to be copied for easy layer creation. please don not edit it. + + [_LX] = KEYMAP_ANSI( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), diff --git a/keyboards/atom47/readme.md b/keyboards/atom47/readme.md new file mode 100644 index 000000000..fec7843ae --- /dev/null +++ b/keyboards/atom47/readme.md @@ -0,0 +1,28 @@ +# ATOM47 + +![ATOM47](https://i.imgur.com/rjrFTKT.png) + +## Support +Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot) +Hardware Supported: ATOM47 +Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221) + + +## Features +QMK Firmware +6 Underglow RGB leds +In-switch leds +Through-hole micro usb connector (less likely to break off!) +South facing leds for the QMX/Zealencio users +Multiple layouts +Easily reachable reset button under the spacebar +CapsLock indicator + +## Build +To build the default keymap, simply run `make atom47:default`. + +For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`. + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +![ATOM47](https://i.imgur.com/WebeUOF.png) diff --git a/keyboards/atom47/rules.mk b/keyboards/atom47/rules.mk new file mode 100644 index 000000000..d446d3a69 --- /dev/null +++ b/keyboards/atom47/rules.mk @@ -0,0 +1,65 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -- cgit v1.2.3-24-g4f1b