From 6d7745a110daad815fe5edbb35a2e33702f24aaa Mon Sep 17 00:00:00 2001 From: markspanbroek Date: Mon, 22 Oct 2018 21:37:03 +0200 Subject: Keyboard: Port of TMK XT USB Converter (#3619) * Converter: add XT USB converter from TMK * Converter: port TMK code for USB converter to QMK * Apply requested changes after code review by @drashna - use "pragma once" instead of include guards - use LAYOUT instead of KEYMAP - allow customisation with matrix_init_user() and matrix_scan_user() - set BOOTLOADER instead of BOOTLOADER_SIZE - Add XT_ENABLE to OPT_DEFS * Remove unnecessary lines --- keyboards/converter/xt_usb/README.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 keyboards/converter/xt_usb/README.md (limited to 'keyboards/converter/xt_usb/README.md') diff --git a/keyboards/converter/xt_usb/README.md b/keyboards/converter/xt_usb/README.md new file mode 100644 index 000000000..40b265a18 --- /dev/null +++ b/keyboards/converter/xt_usb/README.md @@ -0,0 +1,17 @@ +XT to USB keyboard converter +============================== +This is a port of TMK's converter/xt_usb to QMK. + +This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.) + + +Connect Wires +------------- +1. Connect **Vcc** and **GND**. +2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`. +3. You need pull-up resistor. **1K-10K Ohm** will be OK. + + +XT keyboard protocol resource +------------------------------ +https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol -- cgit v1.2.3-24-g4f1b