From 20031ab982db135a10e3d28c5440af622c7cc029 Mon Sep 17 00:00:00 2001 From: Antonio García-Domínguez Date: Tue, 10 Oct 2017 18:07:09 +0100 Subject: Contribute GH60 layout (#1820) * Add first version of my layout * Tweaked layout * gh60/bluezio: SpaceFn CapsLock interferes with Ctrl+Arrows --- keyboards/gh60/keymaps/bluezio/keymap.c | 42 ++++++++++++++++++++ keyboards/gh60/keymaps/bluezio/rules.mk | 69 +++++++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 keyboards/gh60/keymaps/bluezio/keymap.c create mode 100644 keyboards/gh60/keymaps/bluezio/rules.mk (limited to 'keyboards/gh60/keymaps') diff --git a/keyboards/gh60/keymaps/bluezio/keymap.c b/keyboards/gh60/keymaps/bluezio/keymap.c new file mode 100644 index 000000000..ab8909f47 --- /dev/null +++ b/keyboards/gh60/keymaps/bluezio/keymap.c @@ -0,0 +1,42 @@ +#include "gh60.h" +#include "action_layer.h" + +// lshift split, backspace split, full ANSI enter, full right shift +#define KEYMAP_BZIO( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ + } + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: HHKB with hyper key where ctrl used to be, and right half of left + shift used as a key lock */ + KEYMAP_BZIO( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,\ + KC_LSFT, KC_LOCK, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_HYPR, KC_LGUI, KC_LALT, LT(1, KC_SPC), KC_RALT, KC_RGUI, KC_APP, KC_RCTL), + + /* 1: spacefn with WASD arrows/navigation block and extra space key for + realignment of source code, plus IJKL mouse arrows, volume up/down in <>, + and caps lock where it used to be */ + KEYMAP_BZIO( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_PGUP, KC_UP, KC_PGDOWN, KC_INSERT, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DELETE, KC_MS_BTN1, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_HOME, KC_SPC, KC_END, KC_PSCREEN, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/gh60/keymaps/bluezio/rules.mk b/keyboards/gh60/keymaps/bluezio/rules.mk new file mode 100644 index 000000000..bfd26779c --- /dev/null +++ b/keyboards/gh60/keymaps/bluezio/rules.mk @@ -0,0 +1,69 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +# CONSOLE_ENABLE = yes # Console for debug(+400) +# COMMAND_ENABLE = yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +KEY_LOCK_ENABLE = yes # KC_LOCK + +LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift -- cgit v1.2.3-24-g4f1b