From 4e73b0b8d7750bcddc445b5a52008d4c6cea977d Mon Sep 17 00:00:00 2001 From: skullY Date: Wed, 16 Aug 2017 15:08:16 -0700 Subject: Make the bulk of our keyboards match the readme.md standard --- keyboards/gonnerd/readme.md | 38 ++++++++++++++------------------------ 1 file changed, 14 insertions(+), 24 deletions(-) (limited to 'keyboards/gonnerd') diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md index 807df308a..388816abb 100644 --- a/keyboards/gonnerd/readme.md +++ b/keyboards/gonnerd/readme.md @@ -1,5 +1,17 @@ -GON NerD keyboard firmware -====================== +GON NerD +======== + +A Korean Custom TKL. + +Keyboard Maintainer: QMK Community +Hardware Supported: GON NerD TKL PCB +Hardware Availability: http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html + +Make example for this keyboard (after setting up your build environment): + + make gonnerd-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. ## Changing Bootloader @@ -14,25 +26,3 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. - -## Building - -Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. -- cgit v1.2.3-24-g4f1b