From 5e093ad224fad5497f4f5360c8e430ea267ecac5 Mon Sep 17 00:00:00 2001 From: zk-phi Date: Mon, 11 Mar 2019 13:49:08 +0900 Subject: [Keyboard] Add keyboard hifumi (#5341) * Add keyboard hifumi * Update keyboards/hifumi/Readme.md Co-Authored-By: zk-phi * Update keyboards/hifumi/Readme.md Co-Authored-By: zk-phi * Update keyboards/hifumi/Readme.md Co-Authored-By: zk-phi * Update keyboards/hifumi/keymaps/default/keymap.c Co-Authored-By: zk-phi * Update keyboards/hifumi/keymaps/test/keymap.c Co-Authored-By: zk-phi * Update keyboards/hifumi/Readme.md Co-Authored-By: zk-phi * Add DIODE_DIRECTION * Rename readme.md --- keyboards/hifumi/rules.mk | 62 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 keyboards/hifumi/rules.mk (limited to 'keyboards/hifumi/rules.mk') diff --git a/keyboards/hifumi/rules.mk b/keyboards/hifumi/rules.mk new file mode 100644 index 000000000..98560f058 --- /dev/null +++ b/keyboards/hifumi/rules.mk @@ -0,0 +1,62 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing -- cgit v1.2.3-24-g4f1b