From 2c5b5519706e72022f83054d3e3249e3cd4bd1f3 Mon Sep 17 00:00:00 2001 From: jpetermans Date: Mon, 8 May 2017 14:35:08 -0700 Subject: CLeaned out debug code --- keyboards/infinity60/led.c | 4 - keyboards/infinity60/led_controller.c | 275 ++-------------------------------- keyboards/infinity60/led_controller.h | 1 - 3 files changed, 14 insertions(+), 266 deletions(-) (limited to 'keyboards/infinity60') diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c index 92069dc59..d60c76fd8 100644 --- a/keyboards/infinity60/led.c +++ b/keyboards/infinity60/led.c @@ -29,26 +29,22 @@ void led_set(uint8_t usb_led) { msg_t msg; if (usb_led & (1<. /* * LED controller code - * WF uses IS31FL3731C matrix LED driver from ISSI + * IS31FL3731C matrix LED driver from ISSI * datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf */ @@ -56,9 +56,7 @@ along with this program. If not, see . order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...) */ -/* Which LED should be used for CAPS LOCK indicator - * The usual Caps Lock position is C4-6, so the address is - * 0x24 + (4-1)*0x10 + (8-1) = 0x59 */ +// Which LED should be used for CAPS LOCK indicator #if !defined(CAPS_LOCK_LED_ADDRESS) #define CAPS_LOCK_LED_ADDRESS 46 #endif @@ -90,7 +88,6 @@ uint8_t rx[1] __attribute__((aligned(2))); uint8_t full_page[0xB4+1] = {0}; // LED mask (which LEDs are present, selected by bits) -// See page comment above, control alternates CA matrix/CB matrix // IC60 pcb uses only CA matrix. // Each byte is a control pin for 8 leds ordered 8-1 const uint8_t all_on_leds_mask[0x12] = { @@ -182,11 +179,6 @@ static THD_FUNCTION(LEDthread, arg) { uint8_t temp, msg_type, msg_pin, msg_col, msg_led; msg_t msg; -/* //control register variables - uint8_t page, save_page, save_breath1, save_breath2; - msg_t msg, retval; -*/ - // initialize persistent variables pwm_step_status = 4; //full brightness page_status = 0; //start frame 0 (all off/on) @@ -197,77 +189,51 @@ page_status = 0; //start frame 0 (all off/on) // be processed right away) chMBFetch(&led_mailbox, &msg, TIME_INFINITE); msg_col = (msg >> 24) & 0xFF;//if needed - msg_pin = (msg >> 16) & 0XFF;//if needed (SET_FULL_ROW) + msg_pin = (msg >> 16) & 0XFF;//if needed (e.g. SET_FULL_ROW) msg_type = (msg >> 8) & 0xFF; //second byte is msg type msg_led = (msg) & 0xFF; //first byte is action information - xprintf("--------------------\n"); - xprintf("mailbox fetch\nmsg: %X\n", msg); - chThdSleepMilliseconds(20); - xprintf("type: %X - pin: %X\n", msg_type, msg_pin); - chThdSleepMilliseconds(20); - xprintf("col: %X - led: %X\n", msg_col, msg_led); - chThdSleepMilliseconds(10); - switch (msg_type){ - case KEY_LIGHT: - //TODO: lighting key led on keypress - break; - case SET_FULL_ROW: //write full byte to pin address, msg_pin = pin #, msg_led = byte to write //writes only to current page - xprintf("SET_FULL_ROW\n"); write_led_byte(page_status,msg_pin,msg_led); break; case OFF_LED: //on/off/toggle single led, msg_led = row/col of led - xprintf("OFF_LED: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 0); is31_write_data (7, control_register_word, 0x02); break; case ON_LED: - xprintf("ON_LED: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 1); is31_write_data (7, control_register_word, 0x02); break; case TOGGLE_LED: - xprintf("TOGGLE_LED: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 2); is31_write_data (7, control_register_word, 0x02); break; case BLINK_OFF_LED: //on/off/toggle single led, msg_led = row/col of led - xprintf("BLINK_ON: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 4); is31_write_data (7, control_register_word, 0x02); break; case BLINK_ON_LED: - xprintf("BLINK_OFF: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 5); is31_write_data (7, control_register_word, 0x02); break; case BLINK_TOGGLE_LED: - xprintf("BLINK_TOGGLE: %d\n", msg_led); - chThdSleepMilliseconds(10); set_led_bit(7, control_register_word, msg_led, 6); is31_write_data (7, control_register_word, 0x02); break; case TOGGLE_ALL: - xprintf("TOGGLE_ALL: %d\n", msg_led); - chThdSleepMilliseconds(10); //msg_led = unused - is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 0 off + is31_read_register(0, 0x00, &temp); led_control_reg[0] = 0; + //if first byte is on, then toggle frame 0 off if (temp==0 || page_status > 0) { __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); } else { @@ -287,8 +253,6 @@ page_status = 0; //start frame 0 (all off/on) case TOGGLE_BACKLIGHT: //msg_led = on/off - xprintf("TOGGLE_BACKLIGHT\n"); - chThdSleepMilliseconds(10); //populate the 9 byte rows to be written to each pin, first byte is register (pin) address if (msg_led == 1) { @@ -304,13 +268,9 @@ page_status = 0; //start frame 0 (all off/on) } break; - case DISPLAY_PAGE://show single layer indicator or full map of layer - //msg_led = page to toggle on - xprintf("DISPLAY_PAGE\n"); - chThdSleepMilliseconds(10); + case DISPLAY_PAGE: + //msg_led = page to toggle on if (page_status != msg_led) { - xprintf(" - new page\n"); - chThdSleepMilliseconds(10); is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led); page_status = msg_led; @@ -321,33 +281,22 @@ page_status = 0; //start frame 0 (all off/on) case RESET_PAGE: //led_msg = page to reset - xprintf("RESET_PAGE\n"); - chThdSleepMilliseconds(10); led_control_reg[0] = 0; __builtin_memset(led_control_reg+1, 0, 0x12); is31_write_data(msg_led, led_control_reg, 0x13); break; case TOGGLE_NUM_LOCK: - //msg_led = 0 or 1, off/on - xprintf("NUMLOCK: %d\n", msg_led); - chThdSleepMilliseconds(10); + //msg_led = 0 or 1, off/on set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led, page_status); break; - case TOGGLE_CAPS_LOCK: - xprintf("CAPSLOCK: %d\n", msg_led); - chThdSleepMilliseconds(10); - //msg_led = 0 or 1, off/on + //msg_led = 0 or 1, off/on set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led, page_status); break; - //TODO: MODE_BREATH - case STEP_BRIGHTNESS: - xprintf("STEP_BACKLIGHT\n"); - chThdSleepMilliseconds(10); - //led_msg = step pwm up or down + //led_msg = step pwm up or down switch (msg_led) { case 0: if (pwm_step_status == 0) { @@ -375,137 +324,6 @@ page_status = 0; //start frame 0 (all off/on) is31_write_data(0,pwm_register_array,9); } break; - -/* case LED_MSG_SLEEP_LED_ON: - // save current settings - is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page); - is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1); - is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2); - // use pages 7 and 8 for (hardware) breathing (assuming they're empty) - is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF); - is31_write_register(7, BREATHE_LED_ADDRESS, 0x00); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3); - retval = MSG_TIMEOUT; - temp = 6; - while(retval == MSG_TIMEOUT) { - // switch to the other page - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp); - temp = (temp == 6 ? 7 : 6); - // the times should be sufficiently long for IS31 to finish switching pages - retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000)); - } - // received a message (should be a wakeup), so restore previous state - chThdSleepMilliseconds(3000); // need to wait until the page change finishes - // note: any other messages are queued - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page); - break; - case LED_MSG_SLEEP_LED_OFF: - // should not get here; wakeup should be received in the branch above break; - break; -*/ - xprintf("--------------------\n"); - chThdSleepMilliseconds(10); - } - } -} - -/* ============================== - * debug function - * ============================== */ -void print_debug(uint8_t page) { - uint8_t j, debug_temp; - //debugging code - print full led/blink/pwm registers on each frame - xprintf("----layer state----: %X\n", layer_state); - xprintf("page: %d\n", page); - chThdSleepMilliseconds(10); - for(j=0;j<0x24;j++){ - if(j > 0 && j % 9 == 0){ - xprintf("\n"); - } - switch (j) { - case 0: - xprintf("\n--on-off--\n"); - chThdSleepMilliseconds(10); - break; - case 0x12: - xprintf("\n--blink--\n"); - chThdSleepMilliseconds(10); - break; - } - is31_read_register(page,j,&debug_temp); - xprintf("%02X, ", debug_temp); - chThdSleepMilliseconds(10); - } - - xprintf("\n--pwm--\n"); - chThdSleepMilliseconds(10); - for(j=0x24;j<0xB4;j++) { - is31_read_register(page,j,&debug_temp); - xprintf("%02X, ", debug_temp); - chThdSleepMilliseconds(10); - if(j > 0x24 && (j-3) % 8 == 0){ - xprintf("\n"); - } - } - xprintf("\n"); - - //Function Register - xprintf("\n--FUNCTION--\n"); - chThdSleepMilliseconds(10); - for(j=0;j<0x0D;j++) { - is31_read_register(0x0B,j,&debug_temp); - switch(j) { - case 0: - xprintf("Config %02X", debug_temp); - chThdSleepMilliseconds(2); - break; - case 1: - xprintf(" - Pict %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; - case 2: - xprintf("Auto1 %02X", debug_temp); - chThdSleepMilliseconds(2); - break; - case 3: - xprintf(" - Auto2 %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; - case 5: - xprintf("Disp %02X", debug_temp); - chThdSleepMilliseconds(2); - break; - case 6: - xprintf(" - Audio %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; - case 7: - xprintf("Frame %02X", debug_temp); - chThdSleepMilliseconds(2); - break; - case 8: - xprintf(" - Breath1 %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; - case 9: - xprintf("Breath2 %02X - ", debug_temp); - chThdSleepMilliseconds(2); - break; - case 10: - xprintf(" - Shut %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; - case 11: - xprintf("AGC %02X", debug_temp); - chThdSleepMilliseconds(2); - break; - case 12: - xprintf(" - ADC %02X\n", debug_temp); - chThdSleepMilliseconds(2); - break; } } } @@ -515,50 +333,29 @@ void print_debug(uint8_t page) { * ============================== */ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) { - //returns 2 bytes led control register address and byte to write + //returns 2 bytes: led control register address and byte to write //0 - bit off, 1 - bit on, 2 - toggle bit uint8_t control_reg_addr, column_bit, column_byte, bit_temp, blink_on; //check for valid led address if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) { - xprintf("Invalid address: %d\n", led_addr); return; } - xprintf("set_led_bit: %d\n", led_addr); - xprintf("action: %d\n", action); - chThdSleepMilliseconds(10); - //check blink bit + //check for blink bit blink_on = action>>2; action &= ~(1<<2); //strip blink bit //first byte is led control register address 0x00 //msg_led tens column is pin#, ones column is bit position in 8-bit mask control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte - xprintf("pre-reg_addr: %2X\n", control_reg_addr); - chThdSleepMilliseconds(10); control_reg_addr += blink_on == 1 ? 0x12 : 0x00;//shift 12 bytes to blink register - xprintf("blink-reg_addr: %2X\n", control_reg_addr); - chThdSleepMilliseconds(10); - xprintf("page: %2X\n", page); - chThdSleepMilliseconds(10); - - - is31_read_register(page, 0x06, &bit_temp);//maintain status of leds on this byte - xprintf("reg 06: %2X\n", bit_temp); - is31_read_register(page, 0x17, &bit_temp);//maintain status of leds on this byte - xprintf("reg 17: %2X\n", bit_temp); - is31_read_register(page, 0x18, &bit_temp);//maintain status of leds on this byte - xprintf("reg 18: %2X\n", bit_temp); - is31_read_register(page, 0x19, &bit_temp);//maintain status of leds on this byte - xprintf("reg 19: %2X\n", bit_temp); + is31_read_register(page, control_reg_addr, &bit_temp);//maintain status of leds on this byte column_bit = 1<<(led_addr % 10 - 1); column_byte = bit_temp; - xprintf("column_byte read: %2X\n", column_byte); - chThdSleepMilliseconds(10); switch(action) { case 0: column_byte &= ~column_bit; @@ -570,8 +367,6 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint column_byte ^= column_bit; break; } - xprintf("column_byte write: %2X\n", column_byte); - chThdSleepMilliseconds(10); //return word to be written in register led_control_reg[0] = control_reg_addr; @@ -589,7 +384,7 @@ void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) { void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) { uint8_t i; uint8_t pin, col; - uint8_t led_control_register[0x13] = {0};//control register start address + 0x12 bytes + uint8_t led_control_register[0x13] = {0}; __builtin_memset(led_control_register,0,13); @@ -607,30 +402,15 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) { uint8_t lock_temp; uint8_t led_control_word[2] = {0}; - xprintf("---set lock---\n"); - chThdSleepMilliseconds(10); - //blink if all leds are on if (page == 0) { is31_read_register(0, 0x00, &lock_temp); - xprintf("AllOnReg: %2X\n", lock_temp); - chThdSleepMilliseconds(10); if (lock_temp == 0xFF) { - xprintf("AllOntrue\n"); - chThdSleepMilliseconds(10); led_action |= (1<<2); //set blink bit - } else { - xprintf("AllOnfalse\n"); - chThdSleepMilliseconds(10); } } set_led_bit(page,led_control_word,led_addr,led_action); - - xprintf("led_word: %2X", led_control_word[0]); - xprintf("%X\n", led_control_word[1]); - chThdSleepMilliseconds(10); - is31_write_data(page, led_control_word, 0x02); } @@ -679,30 +459,3 @@ void led_controller_init(void) { chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS); chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL); } - -//TODO: Don't know equivalent QMK hooks for these -// -//void hook_usb_suspend_entry(void) { -//#ifdef SLEEP_LED_ENABLE -// chSysLockFromISR(); -// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON); -// chSysUnlockFromISR(); -//#endif /* SLEEP_LED_ENABLE */ -//} -// -//void hook_usb_suspend_loop(void) { -// chThdSleepMilliseconds(100); -// /* Remote wakeup */ -// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) { -// send_remote_wakeup(&USB_DRIVER); -// } -//} -// -//void hook_usb_wakeup(void) { -//#ifdef SLEEP_LED_ENABLE -// chSysLockFromISR(); -// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF); -// chSysUnlockFromISR(); -//#endif /* SLEEP_LED_ENABLE */ -//} -//*/ diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h index 7bdef7ae6..457b21a92 100644 --- a/keyboards/infinity60/led_controller.h +++ b/keyboards/infinity60/led_controller.h @@ -31,7 +31,6 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result); * ============================*/ void led_controller_init(void); -void print_debug (uint8_t page); #define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location #define NUM_LOCK_LED_ADDRESS 85 -- cgit v1.2.3-24-g4f1b