From 79603022422cec39ea44686c84a1050acd0c145e Mon Sep 17 00:00:00 2001 From: Michael Terhar Date: Sat, 26 Aug 2017 23:33:33 -0400 Subject: Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-) --- keyboards/jd45/keymaps/mjt/Makefile | 21 +++++ keyboards/jd45/keymaps/mjt/config.h | 85 +++++++++++++++++++ keyboards/jd45/keymaps/mjt/keymap.c | 80 ++++++++++++++++++ keyboards/jd45/keymaps/mjt/readme.md | 12 +++ keyboards/jd45/keymaps/mjt/rules.mk | 67 +++++++++++++++ keyboards/jd45/keymaps/mjt6u/Makefile | 23 +++++ keyboards/jd45/keymaps/mjt6u/config.h | 84 +++++++++++++++++++ keyboards/jd45/keymaps/mjt6u/keymap.c | 149 +++++++++++++++++++++++++++++++++ keyboards/jd45/keymaps/mjt6u/readme.md | 23 +++++ 9 files changed, 544 insertions(+) create mode 100644 keyboards/jd45/keymaps/mjt/Makefile create mode 100644 keyboards/jd45/keymaps/mjt/config.h create mode 100644 keyboards/jd45/keymaps/mjt/keymap.c create mode 100644 keyboards/jd45/keymaps/mjt/readme.md create mode 100644 keyboards/jd45/keymaps/mjt/rules.mk create mode 100644 keyboards/jd45/keymaps/mjt6u/Makefile create mode 100644 keyboards/jd45/keymaps/mjt6u/config.h create mode 100644 keyboards/jd45/keymaps/mjt6u/keymap.c create mode 100644 keyboards/jd45/keymaps/mjt6u/readme.md (limited to 'keyboards/jd45') diff --git a/keyboards/jd45/keymaps/mjt/Makefile b/keyboards/jd45/keymaps/mjt/Makefile new file mode 100644 index 000000000..c92000665 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/jd45/keymaps/mjt/config.h b/keyboards/jd45/keymaps/mjt/config.h new file mode 100644 index 000000000..276639514 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/config.h @@ -0,0 +1,85 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT JD45 +#define DESCRIPTION q.m.k. keyboard firmware for JD45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +#define USB_MAX_POWER_CONSUMPTION 50 +#define BACKLIGHT_BREATHING + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/jd45/keymaps/mjt/keymap.c b/keyboards/jd45/keymaps/mjt/keymap.c new file mode 100644 index 000000000..1a7302216 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/keymap.c @@ -0,0 +1,80 @@ +#include "jd45.h" + +/* Mike's Layout for JD45 with backlight LEDs acting as layer indicator + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, BSLS, + FN1, A, S, D, F, G, H, J, K, L, QUOT, ENT, + FN0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + NO, LCTL, LALT, LGUI, SPC, BSPC, APP, FN2, ESC, NO ), +[1] = KEYMAP( +GRV, TRNS, UP, TRNS, 7, 8, 9, 0, MINS, EQL, PSCR, LBRC, RBRC, +TRNS, LEFT, DOWN, RGHT, 4, 5, 6, INS, HOME, PGUP, SCLN, TRNS, +TRNS, TRNS, TRNS, TRNS, 1, 2, 3, DEL, END, PGDN, TRNS, TRNS, +TRNS, TRNS, TRNS, SPC, TRNS, DEL, TRNS, FN3, TRNS, TRNS ), +[2] = KEYMAP( +TRNS, TRNS, VOLU, TRNS, F7, F8, F9, F10, F11, F12, PSCR, FN3, FN4, +TRNS, MPRV, VOLD, MNXT, F4, F5, F6, J, K, L, SCLN, TRNS, +TRNS, TRNS, TRNS, TRNS, F1, F2, F3, MUTE, MPRV, MNXT, MSTP, TRNS, +TRNS, TRNS, TRNS, LGUI, TRNS, TRNS, TRNS, TRNS, PAUS, TRNS ) +/* , +[3] = KEYMAP( +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, BTLD, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS )*/ +}; + +enum macro_id { + M_LAYER1, + M_LAYER2 +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_TOGGLE(MOD_LSFT), + // [1] = ACTION_LAYER_TAP_TOGGLE(1), + [1] = ACTION_MACRO(M_LAYER1), + [2] = ACTION_LAYER_TAP_TOGGLE(2), + [3] = ACTION_BACKLIGHT_STEP(), + [4] = ACTION_BACKLIGHT_TOGGLE() +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case M_LAYER1: + // need to add a timer for doubletap: https://github.com/jackhumbert/qmk_firmware/wiki#timer-functionality + // action_function_tap may also handle this... + if (record->event.pressed) + { + breathing_speed_set(3); + breathing_enable(); + layer_on(1); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(1); + } + break; + case M_LAYER2: + if (record->event.pressed) + { + breathing_speed_set(2); + breathing_pulse(); + layer_on(2); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(2); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/jd45/keymaps/mjt/readme.md b/keyboards/jd45/keymaps/mjt/readme.md new file mode 100644 index 000000000..54bdb8346 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/readme.md @@ -0,0 +1,12 @@ +# Mike's JD45 standard layout + +- Backlight that matches active layer +- Works with iPhone Camera Adapter + +## Layers + +Base for letters and mods. + +Function 1 layer adds a centered numpad to the board + +Function 2 layer replaces the numpad numbers with Fkeys. diff --git a/keyboards/jd45/keymaps/mjt/rules.mk b/keyboards/jd45/keymaps/mjt/rules.mk new file mode 100644 index 000000000..6eec21160 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +# UNICODE_ENABLE = YES # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/jd45/keymaps/mjt6u/Makefile b/keyboards/jd45/keymaps/mjt6u/Makefile new file mode 100644 index 000000000..f9cec3b84 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/Makefile @@ -0,0 +1,23 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +DEBUG_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/jd45/keymaps/mjt6u/config.h b/keyboards/jd45/keymaps/mjt6u/config.h new file mode 100644 index 000000000..bf9dc6df3 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/config.h @@ -0,0 +1,84 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT JD45 +#define DESCRIPTION q.m.k. keyboard firmware for JD45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +#define USB_MAX_POWER_CONSUMPTION 50 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/jd45/keymaps/mjt6u/keymap.c b/keyboards/jd45/keymaps/mjt6u/keymap.c new file mode 100644 index 000000000..44f0c31db --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/keymap.c @@ -0,0 +1,149 @@ +#include "jd45.h" + +enum jd45_layers +{ + _QWERTY, + _QWERTYNUMMODS, + _NUMSYM, + _FUNCTION, + _NUMPAD, + _FKEYNUMPAD, + _ADJUST +}; + +enum jd45_keycodes +{ + NUMSYM = SAFE_RANGE, + MACSLEEP, + USEFNMODS, + USENUMMODS, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +#define LONGPRESS_DELAY 150 +#define LAYER_TOGGLE_DELAY 900 + +#define _______ KC_TRNS +#define __MOD__ KC_TRNS +#define XXXXXXX KC_NO +#define F_FNSPC F(0) +#define F_NUMSPC F(1) +#define F_FNTAB F(2) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = { + {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC}, + {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + { XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_FNSPC, XXXXXXX, XXXXXXX, MO(_FUNCTION), MO(_ADJUST) } +}, +[_QWERTYNUMMODS] = { + {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC}, + {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + {XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_NUMSPC, XXXXXXX, XXXXXXX, MO(_FKEYNUMPAD), MO(_ADJUST) } +}, +[_NUMSYM] = { +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_DEL}, + {__MOD__, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______}, + {_______, _______, _______, _______, _______, KC_SPC, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______}, +{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} +}, +[_FUNCTION] = { +{__MOD__, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, +{__MOD__, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______, _______}, +{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, +{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__ , __MOD__} +}, +[_NUMPAD] = { +{KC_GRV, _______, KC_UP, _______, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PSCR, KC_LBRC, KC_RBRC}, +{_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_4, KC_5, KC_6, KC_INS, KC_HOME, KC_PGUP, _______, _______}, +{_______, _______, _______, _______, KC_1, KC_2, KC_3, KC_DEL, KC_END, KC_PGDN, _______, _______}, +{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} +}, +[_FKEYNUMPAD] = { +{_______, _______, KC_VOLU, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, _______, _______}, +{_______, KC_MPRV, KC_VOLD, KC_MNXT, KC_F4, KC_F5, KC_F6, KC_J, KC_K, KC_L, KC_SCLN, _______}, +{_______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_MUTE, KC_MPRV, KC_MNXT, KC_MSTP, _______}, +{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__ } +}, +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, KC_PSCR, _______, _______}, + { _______, _______, _______, _______, USEFNMODS, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, MACSLEEP, _______, _______}, + { _______, _______, _______, _______, _______, _______, USENUMMODS, _______, _______, _______, _______, _______}, + {XXXXXXX, _______, _______,XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} + } +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_NUMSYM, KC_SPC), + [1] = ACTION_LAYER_TAP_KEY(_NUMPAD, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(_FUNCTION, KC_TAB), +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +static bool singular_key = false; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + println(" "); + print("process record"); + + switch (keycode) { + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + case USEFNMODS: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnpc, false, 0); + #endif + print("Space-FN"); + } + return false; + break; + case USENUMMODS: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTYNUMMODS); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnmac, false, 0); + #endif + print("Space-Numpad"); + } + return false; + break; + default: + singular_key = false; + break; + } + + return true; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + // debug_enable = true; +} diff --git a/keyboards/jd45/keymaps/mjt6u/readme.md b/keyboards/jd45/keymaps/mjt6u/readme.md new file mode 100644 index 000000000..a43ddf5fc --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/readme.md @@ -0,0 +1,23 @@ +# Mike's JD45 with 6u Spacebar + +- Early draft of numsym that misses a lot of symbols +- Numpad layer available for evaluation +- Works with iPhone Camera Adapter +- Dynamic macros + +## Layers + +Qwerty for letters and mods. + +Qwertymods layer switches some Modifiers around + +Numsym puts the number keys across the top row like a Planck. Arrows are on hjkl +which makes the other NumSym dynamic from my other boards fall apart + +Function layer replaces the top row numbers with Fkeys. + +Numpad layer makes a number pad in the center. + +Fkeynumpad replaces the numpad numbers with Fkeys. + +Adjust layer has macros and configuration. -- cgit v1.2.3-24-g4f1b