From 349e0012ba2f378a3de3ac12966bfa6ea9b679ad Mon Sep 17 00:00:00 2001 From: Marco Date: Fri, 25 Aug 2017 18:48:40 +0200 Subject: Basic support for JM60 keyboard This adds basic support for JM60 RGB PCB that was sold by KBDfans https://kbdfans.myshopify.com/ https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html No support for RGB Backlight yet. --- keyboards/jm60/rules.mk | 56 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 keyboards/jm60/rules.mk (limited to 'keyboards/jm60/rules.mk') diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk new file mode 100644 index 000000000..d11c38ecf --- /dev/null +++ b/keyboards/jm60/rules.mk @@ -0,0 +1,56 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F1xx + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +MCU_LDSCRIPT = jm60_bootloader + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f1xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = JM60_BOARD + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m3 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 +OPT_DEFS = + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +CUSTOM_MATRIX = yes # Custom matrix file +BACKLIGHT_ENABLE = no +VISUALIZER_ENABLE = no + +#LED_DRIVER = is31fl3731c +#LED_WIDTH = 16 +#LED_HEIGHT = 5 -- cgit v1.2.3-24-g4f1b