From a3104a71105e7743c778c47617dce0468bf8dc1f Mon Sep 17 00:00:00 2001 From: Chuck Lauer Vose Date: Wed, 6 Feb 2019 14:41:17 -0800 Subject: [Keyboard] Initial commit of Laptreus Keyboard (#4967) * Add userspace files for vosechu * Code review corrections * Few more code review corrections * Initial add of Laptreus code * Initial add of Laptreus code * Adding last punctuation to default * Add some debug suggestions to the debug readme * Fixes for PR feedback * Fixing capitalization of readme files * update auto detect connection logic --- keyboards/laptreus/rules.mk | 67 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 keyboards/laptreus/rules.mk (limited to 'keyboards/laptreus/rules.mk') diff --git a/keyboards/laptreus/rules.mk b/keyboards/laptreus/rules.mk new file mode 100644 index 000000000..d17034507 --- /dev/null +++ b/keyboards/laptreus/rules.mk @@ -0,0 +1,67 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = catarina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +#BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +#MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +KEY_LOCK_ENABLE = no +TAP_DANCE_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +BLUETOOTH_ENABLE = no # Legacy bluetooth support +BLUETOOTH = AdafruitBLE -- cgit v1.2.3-24-g4f1b