From 57ef8a54e42b4dfd3ab5eb2648f4e838aaa5e547 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 15 Dec 2017 14:06:29 -0500 Subject: deletes the extra mechmini readme [doh] --- keyboards/mechmini/README.md | 64 -------------------------------------------- 1 file changed, 64 deletions(-) delete mode 100644 keyboards/mechmini/README.md (limited to 'keyboards/mechmini') diff --git a/keyboards/mechmini/README.md b/keyboards/mechmini/README.md deleted file mode 100644 index b95153051..000000000 --- a/keyboards/mechmini/README.md +++ /dev/null @@ -1,64 +0,0 @@ -mechmini -======== - -A compact ortholinear/staggered keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: mechmini PCB -Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb - -Make example for this keyboard (after setting up your build environment): - - make mechmini:default - -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. - -## Mechmini Notes - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./program` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make mechmini:program -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it -in the bootloader: - -``` -$ make mechmini -$ bootloadHID -r mechmini_default.hex -``` - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while pressing `L_Ctrl`. This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. -- cgit v1.2.3-24-g4f1b