From e661f1559ebdf90c3bb806b6f5940c5363720738 Mon Sep 17 00:00:00 2001 From: MxBlu Date: Sun, 8 Jul 2018 12:33:36 +1000 Subject: Add MxSS keyboard (#3335) * Added basic MxSS support * Fixed split RSHFT for ISO layouts * Updated readme.md for MxSS * Added initial support for individual control of front RGB LEDs * Changed RGBLED color selection to work using hue and saturation rather than RGB Added code for LED state change on layer change * Avoid needing an entire 8 bits to store the brightness value * Added custom keycodes, along with their handlers * Added EEPROM storage for front LED config * Fixed up ability to use QMK Configurator and updated readme.md * Applied suggested changes from pull request: https://github.com/standard/standard/issues/452 Updated name in license descriptions Updated layouts to snake case Corrected mistakes in info.json Updated layer_colors to a weak attributed array in mxss.c * Defined a new safe range for custom keycodes in keymap.c --- keyboards/mxss/mxss_frontled.h | 81 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 keyboards/mxss/mxss_frontled.h (limited to 'keyboards/mxss/mxss_frontled.h') diff --git a/keyboards/mxss/mxss_frontled.h b/keyboards/mxss/mxss_frontled.h new file mode 100644 index 000000000..1350266ba --- /dev/null +++ b/keyboards/mxss/mxss_frontled.h @@ -0,0 +1,81 @@ +/* Copyright 2018 Jumail Mundekkat / MxBlue + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// EEPROM management code taken from Wilba6582 +// https://github.com/Wilba6582/qmk_firmware/blob/zeal60/keyboards/zeal60/zeal_eeprom.h + +#ifndef MXSS_FRONTLED_H +#define MXSS_FRONTLED_H + +#include "quantum_keycodes.h" + +// RGBLED index for front LEDs +#define RGBLIGHT_FLED1 14 +#define RGBLIGHT_FLED2 15 + +// Brightness increase step for front LEDs +#define FLED_VAL_STEP 8 + +// QMK never uses more then 32bytes of EEPROM, so our region starts there +// Magic value to verify the state of the EEPROM +#define EEPROM_MAGIC 0xC3E7 +#define EEPROM_MAGIC_ADDR ((void*)32) + +// Front LED settings +#define EEPROM_FRONTLED_ADDR ((void*)34) + +// Modes for front LEDs +#define FLED_OFF 0b00 +#define FLED_INDI 0b01 +#define FLED_RGB 0b10 +#define FLED_UNDEF 0b11 + +// Hard-coded color for capslock indicator in FLED_INDI mode, H:0% S:100% = Red +#define FLED_CAPS_H 0 +#define FLED_CAPS_S 255 + +// Config storage format for EEPROM +typedef union { + uint8_t raw; + struct { + uint8_t mode :2; + uint8_t val :6; + }; +} fled_config; + +// Structure to store hue and saturation values +typedef struct _hs_set { + uint16_t hue; + uint8_t sat; +} hs_set; + +// Custom keycodes for front LED control +enum fled_keycodes { + FLED_MOD = SAFE_RANGE, + FLED_VAI, + FLED_VAD, + NEW_SAFE_RANGE // define a new safe range +}; + +bool eeprom_is_valid(void); // Check if EEPROM has been set up +void eeprom_set_valid(bool valid); // Change validity state of EEPROM +void eeprom_update_conf(void); // Store current front LED config to EEPROM + +void fled_mode_cycle(void); // Cycle between the 3 modes for the front LEDs +void fled_val_increase(void); // Increase the brightness of the front LEDs +void fled_val_decrease(void); // Decrease the brightness of the front LEDs + +#endif //MXSS_FRONTLED_H \ No newline at end of file -- cgit v1.2.3-24-g4f1b