From 997bafc8ec4ff793d7ded0b9dc3b2fc3d13b81b5 Mon Sep 17 00:00:00 2001
From: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
Date: Fri, 3 May 2019 17:28:03 -0700
Subject: [Keyboard] Refactor S60x (#5596)

* remove files that contributed to default hex file creation

* fix up rgb pcb rules and config that previously depended on rules and config in a parent directory

* use #pragma once

* turn on backlight breathing and use #pragma once

* fix config.h and rules.mk to not depend on the parent directory

* use #pragma once

* removed keyboard info.jsons in favor of a shared one

* add in hhkb layout and shared info.json file

* fixup readme file

* remove cruft

* use bootmagic lite over yes

* fix config path and use pragma once

* commit PR fixes

* update manufacturer

* set bootloader correctly
---
 keyboards/sentraq/s60_x/rules.mk | 69 ----------------------------------------
 1 file changed, 69 deletions(-)
 delete mode 100644 keyboards/sentraq/s60_x/rules.mk

(limited to 'keyboards/sentraq/s60_x/rules.mk')

diff --git a/keyboards/sentraq/s60_x/rules.mk b/keyboards/sentraq/s60_x/rules.mk
deleted file mode 100644
index 31de8ba39..000000000
--- a/keyboards/sentraq/s60_x/rules.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-
-DEFAULT_FOLDER = sentraq/s60_x/default
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso
-- 
cgit v1.2.3-24-g4f1b