From e26a7b0ed8af7b6b4e99fee718ca265fcc8961f1 Mon Sep 17 00:00:00 2001 From: fougner Date: Mon, 22 Oct 2018 23:01:45 +0200 Subject: Keyboard: initial support for XD87 (#4182) * Keyboard: initial support for XD87 * Add row/col pin configuration for XD87 PCB * Add default ISO layout * Fix incorrect KC in default_tkl_iso The KC_NUBS is duplicated in the TKL ISO layout. Compare with the fullsize ISO which has a KC_NUHS in the corresponding place. * Add support for community layouts * Add TKL ANSI layout * Enable TKL ISO/ANSI community layout * Fix LAYOUT_all * Configure backlighting for XD87 * Various documentation changes --- keyboards/xd87/readme.md | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 keyboards/xd87/readme.md (limited to 'keyboards/xd87/readme.md') diff --git a/keyboards/xd87/readme.md b/keyboards/xd87/readme.md new file mode 100644 index 000000000..0b9389740 --- /dev/null +++ b/keyboards/xd87/readme.md @@ -0,0 +1,26 @@ +# XD87 + +![XD87](https://i.imgur.com/qVyOies.jpg) + + +- Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner) +- Hardware Supported: XD87 PCB v1.1 +- Hardware Availability: + - [KPrepublic.com](https://kprepublic.com/products/xd87-xd87-xd80-custom-mechanical-keyboard-kit80-supports-tkg-tools-support-underglow-rgb-pcb-programmed-gh80-kle) + - [AliExpress](https://www.aliexpress.com/item/xd87-XD87-XD80-Custom-Mechanical-Keyboard-Kit80-Supports-TKG-TOOLS-Support-Underglow-RGB-PCB-programmed-gh80/32892540743.html) + +Make example for this keyboard (after setting up your build environment): + + make xd87:default + +It also supports the tkl_ansi and tkl_iso community layouts: + + # Build firmware with ANSI layout + make xd87:default_tkl_ansi + # Build firmware with ISO layout + make xd87:default_tkl_iso + + +The keyboard can be reset to bootloader by using bootmagic (space+b by default) or short out the small connector between the Delete and End keys. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file -- cgit v1.2.3-24-g4f1b