From 48a992f1c037658bbacccefd2709ffdcda8bb345 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Fri, 14 Sep 2018 04:37:13 +1000 Subject: Zeal60/Zeal65/M60-A implementation (#3879) * Initial version of zeal60 * WIP * Fixes issue #900 * Adding RGB underglow functionality. Fixed a compile-time conflict caused by enabling RGB underglow functionality. * Refactor RPC protocol * Fix last merge * README for RGB underglow updated. * Additional README changes. * Adding RGBW strip software-based current-limiting functionality. * RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead. * Updated README to reflect implementation of built-in current limiting. * Keymap readability improvements. * Minor keymap improvements. * Fixed LED driver init sequence, formatting * Dimming implementation tested, working. * Stab LEDs synced with spacebar hits in effects. * RGB underglow tested and functional. Simplified README for RGB underglow. * Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow. * Improved arrow key positions in keymap. * Added functionality to correct uneven RGB underglow. Refactored related code. * Reverted to safer values for underglow. * Changes for v0.3 * Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden. * Create keymap.c Added split backspace and split shift to ISO layout * Create config.h Turned on LEDs for new layout * Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above. * Added hhkb_wilba keymap * Update keymap.c * Update keymap.c * Update keymap.c * Added indicators, full param setting via host * Added "mousekey" layout * Added Zeal65 support, factory test mode * Keycode safe range changed, caused bugs * Bumped EEPROM version due to change in QMK keycodes * Disable HHKB "blocked" LEDs if KC_NO in keymap * Added "disable_hhkb_blocker_leds" * Required overridden function for keymaps in EEPROM * Added polar coordinate mapping, effect speed * Force Raw HID interface number to 1 always * Fixed last merge from master * Added effect speed to default keymaps * add BACKLIGHT_ prefix to vars * add BACKLIGHT_ prefix to vars * Keymap speed effect; keymap improvements/fixes Readme updated to match changes * Refactored to use common IS31FL3731/I2C drivers * Fixed make rules, backlight disabled feature * Make split rightshift default for Zeal65 * Added M60-A as a "version" of Zeal60. * Renamed IS31FL3731 driver functions * Fix suspend_wakeup_init_kb() being defined twice * First pass refactor dynamic keymaps * Updated to changed I2C and ISSI drivers * Refactor zeal_color.* usage to quantum/color.* * Updated Zeal65, fixed dynamic_keymap * Major refactoring of Zeal60 backlight and API * Lots of little cleanups * Added readme.md * Added readme.md * Added LAYOUT_60*() macros, refactored and cleaned up default keymaps * Fix compile error in suspend.c * Added Zeal65 LAYOUT macros, info.json * Added rama/m60_a, deleted zeal60/keymaps/m60_a * Fixed rama/m60_a/keymaps/proto * Fixed compilation error for suspend.c * Requested changes for PR * Fixed readme.md images * Another readme.md fix * Added drashna's requested changes --- keyboards/zeal60/keymaps/tusing/Makefile | 6 +++ keyboards/zeal60/keymaps/tusing/README.md | 80 +++++++++++++++++++++++++++++++ keyboards/zeal60/keymaps/tusing/config.h | 40 ++++++++++++++++ keyboards/zeal60/keymaps/tusing/keymap.c | 49 +++++++++++++++++++ 4 files changed, 175 insertions(+) create mode 100644 keyboards/zeal60/keymaps/tusing/Makefile create mode 100644 keyboards/zeal60/keymaps/tusing/README.md create mode 100644 keyboards/zeal60/keymaps/tusing/config.h create mode 100644 keyboards/zeal60/keymaps/tusing/keymap.c (limited to 'keyboards/zeal60/keymaps/tusing') diff --git a/keyboards/zeal60/keymaps/tusing/Makefile b/keyboards/zeal60/keymaps/tusing/Makefile new file mode 100644 index 000000000..762905da0 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/Makefile @@ -0,0 +1,6 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes +AUDIO_ENABLE = no # Underglow cannot be used with audio. diff --git a/keyboards/zeal60/keymaps/tusing/README.md b/keyboards/zeal60/keymaps/tusing/README.md new file mode 100644 index 000000000..edddf1c58 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/README.md @@ -0,0 +1,80 @@ +# RGB Underglow Strip on the Zeal60: A Guide + + + +## Requirements + +- WS2812B RGB strip, preferably 60 LEDs/meter +- Wire, solder +- Tape, hot glue, or some sort of adhesive + +## A. Connecting the strip +You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes! + +1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.) + + + +2. Connect DI to PB0. + + + +3. Should look something like this when finished: + + + +*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.) + +## B. Enabling the strip +1. If it is not present already, add the following to your ***keymap's*** ```Makefile```: + + ```Makefile + RGBLIGHT_ENABLE = yes + AUDIO_ENABLE = no #Underglow animations cannot be used with audio. + ``` +2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary: + + ```c + // Set up RGB underglow. + #define RGB_DI_PIN B0 // The pin your RGB strip is wired to + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) + #define RGBLED_NUM 35 // Number of LEDs + #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue + #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat + #define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val + ``` +3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap. + +## C. Dealing with current limits +USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth. + +***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary! + +1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates. + + ```c + // Enable current limiting for RGB underglow. + #define RGBSTRIP_CURRENT_LIMIT 400 // Strip current limit in mA. (USB amperage - 500mA for keyboard) + #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness. + ``` + *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`. +2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out! + +## D. Sources and resources +### A. Connecting the strip. +* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/) +* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png) +* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3) +* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ ) + +### B. Enabling the strip. +* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod) +* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang) +* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY) + +### C. Dealing with current limits. +* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/) +* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG) +* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2) +* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954) +* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7) \ No newline at end of file diff --git a/keyboards/zeal60/keymaps/tusing/config.h b/keyboards/zeal60/keymaps/tusing/config.h new file mode 100644 index 000000000..93f260946 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/config.h @@ -0,0 +1,40 @@ +#pragma once + +/* Enable/disable LEDs based on layout. */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + +// Set up RGB underglow. +#define RGB_DI_PIN B0 // The pin your RGB strip is wired to +#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) +#define RGBLED_NUM 35 // Number of LEDs +#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue +#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat +#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val + +// Enable current limiting for RGB underglow. +#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard) +#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness. + +// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c. +// This allows to mitigate uneven brightness from LED underglow strips. +// #define LED_BRIGHTNESS_CORRECTION + +// Prevent modifiers on layer 1 from persisting after we let go +#define PREVENT_STUCK_MODIFIERS + diff --git a/keyboards/zeal60/keymaps/tusing/keymap.c b/keyboards/zeal60/keymaps/tusing/keymap.c new file mode 100644 index 000000000..41d2effd4 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/keymap.c @@ -0,0 +1,49 @@ +// Default layout for Zeal60 +#include QMK_KEYBOARD_H + +// For readability. +#define _______ KC_TRNS +#define _x_ KC_NO +#define AUD_PRV LCTL(KC_MPRV) // Previous music track +#define AUD_PLY LCTL(KC_MPLY) // Pause music +#define AUD_NXT LCTL(KC_MNXT) // Next music track + +// Zeal60-specific keys: +// EF_INC, EF_DEC, // next/previous backlight effect +// H1_INC, H1_DEC, // Color 1 hue increase/decrease +// S1_INC, S1_DEC, // Color 1 saturation increase/decrease +// H2_INC, H2_DEC, // Color 2 hue increase/decrease +// S2_INC, S2_DEC, // Color 2 saturation increase/decrease +// BR_INC, BR_DEC, // backlight brightness increase/decrease + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// Default layer: Pressing caps-lock momentarily switches to Layer 1. +// This is the default layer. Pressing an empty keycode on another layer will take you here. + [0] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, _x_ }, + {KC_LSFT, _x_ , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_ }, + {KC_LCTL, KC_LGUI, KC_LALT, _x_ , _x_ , _x_ , _x_ , KC_SPC, _x_ , _x_ , KC_LEFT, KC_UP, KC_DOWN, KC_RGHT} + }, + +// Layer 1: Pressing enter switches to layer 2, where backlight controls live. +// This is a momentary layer: once you let go of caps, you'll be back in layer 1. + [1] = { + {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL }, + {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, KC_DEL, _______}, + {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2) , _x_ }, + {KC_CAPS, _x_ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _x_ }, + {KC_RCTL, KC_RGUI, KC_RALT, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , KC_HOME, KC_PGUP, KC_PGDN, KC_END} + }, + +// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.) +// This is a persistent layer. Get back to the default layer by pressing enter. + [2] = { + {RESET, EF_DEC, EF_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, _______, _______, _______, _______, _______, _______, _______}, + {_______, H1_DEC, H1_INC, S1_DEC, S1_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, H2_DEC, H2_INC, S2_DEC, S2_INC, _______, _______, _______, _______, _______, _______, _______, TO(0) , _x_ }, + {RGB_MOD, _x_ , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _x_ }, + {RGB_TOG, RGB_VAD, RGB_VAI, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , _______, _______, _______, _______} + } +}; -- cgit v1.2.3-24-g4f1b From 743449472e58651ec8111e6f70811103fb0a28bd Mon Sep 17 00:00:00 2001 From: Joe Wasson Date: Mon, 17 Sep 2018 10:48:02 -0700 Subject: Make `PREVENT_STUCK_MODIFIERS` the default (#3107) * Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps. --- keyboards/zeal60/keymaps/tusing/config.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'keyboards/zeal60/keymaps/tusing') diff --git a/keyboards/zeal60/keymaps/tusing/config.h b/keyboards/zeal60/keymaps/tusing/config.h index 93f260946..64aaece50 100644 --- a/keyboards/zeal60/keymaps/tusing/config.h +++ b/keyboards/zeal60/keymaps/tusing/config.h @@ -34,7 +34,3 @@ // Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c. // This allows to mitigate uneven brightness from LED underglow strips. // #define LED_BRIGHTNESS_CORRECTION - -// Prevent modifiers on layer 1 from persisting after we let go -#define PREVENT_STUCK_MODIFIERS - -- cgit v1.2.3-24-g4f1b