From 8007d9f3a7583adeedd26fa7ab1622e06fed8034 Mon Sep 17 00:00:00 2001
From: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
Date: Fri, 17 Aug 2018 16:04:21 -0700
Subject: Keyboard: Zen refactor and Configurator support (#3677)

* Matrix refactor

* Keymap refactor

* Configurator support

* Readme reformatting
---
 keyboards/zen/readme.md | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

(limited to 'keyboards/zen/readme.md')

diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md
index 36c63d293..beb5e13ac 100644
--- a/keyboards/zen/readme.md
+++ b/keyboards/zen/readme.md
@@ -1,12 +1,20 @@
-Zen Keyboard
-====
+# Zen Keyboard
 
 A split ergo keyboard with a few goals in mind:
- - Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
- - Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholiniear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
- - RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
- - Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
 
-A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/)
+- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
+- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
+- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
+- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
 
-Maintained by u/legonut3
\ No newline at end of file
+Keyboard Maintainer: [Legonut](https://github.com/Legonut)  
+Hardware Supported: Zen rev1  
+Hardware Availability: [RGBKB.net](https://www.rgbkb.net/)
+
+A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/).
+
+Make example for this keyboard (after setting up your build environment):
+
+    make zen/rev1:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-- 
cgit v1.2.3-24-g4f1b