From 9382bf2f765cfbb8f7a9a48157391cac2bb71780 Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 14 Aug 2012 00:46:03 +0900 Subject: Add USB_Host_Shield_2.0 and arduino-1.0.1 in usb_hid. --- .../usb_hid/arduino-1.0.1/cores/arduino/Arduino.h | 215 +++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h (limited to 'protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h') diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h new file mode 100644 index 000000000..830c9952f --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h @@ -0,0 +1,215 @@ +#ifndef Arduino_h +#define Arduino_h + +#include +#include +#include + +#include +#include +#include + +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 +#define INPUT_PULLUP 0x2 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) +#define DEFAULT 0 +#define EXTERNAL 1 +#define INTERNAL 2 +#else +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 +#endif + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) +#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. + +#define analogInPinToBit(P) (P) + +// On the ATmega1280, the addresses of some of the port registers are +// greater than 255, so we can't store them in uint8_t's. +extern const uint16_t PROGMEM port_to_mode_PGM[]; +extern const uint16_t PROGMEM port_to_input_PGM[]; +extern const uint16_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#ifdef ARDUINO_MAIN +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 +#endif + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +#define TIMER3A 8 +#define TIMER3B 9 +#define TIMER3C 10 +#define TIMER4A 11 +#define TIMER4B 12 +#define TIMER4C 13 +#define TIMER4D 14 +#define TIMER5A 15 +#define TIMER5B 16 +#define TIMER5C 17 + +#ifdef __cplusplus +} // extern "C" +#endif + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#endif + +#include "pins_arduino.h" + +#endif -- cgit v1.2.3-24-g4f1b