From 35a81f5b8b081e1607a7c04489b01f551c3213cc Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Mon, 26 Oct 2015 16:32:37 -0400
Subject: added ergodox

---
 quantum/config_common.h | 116 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 quantum/config_common.h

(limited to 'quantum/config_common.h')

diff --git a/quantum/config_common.h b/quantum/config_common.h
new file mode 100644
index 000000000..da53fce89
--- /dev/null
+++ b/quantum/config_common.h
@@ -0,0 +1,116 @@
+#ifndef CONFIG_DEFINITIONS_H
+#define CONFIG_DEFINITIONS_H
+
+#define B0 0x20
+#define B1 0x21
+#define B2 0x22
+#define B3 0x23
+#define B4 0x24
+#define B5 0x25
+#define B6 0x26
+#define B7 0x27
+#define C0 0x30
+#define C1 0x31
+#define C2 0x32
+#define C3 0x33
+#define C4 0x34
+#define C5 0x35
+#define C6 0x36
+#define C7 0x37
+#define D0 0x40
+#define D1 0x41
+#define D2 0x42
+#define D3 0x43
+#define D4 0x44
+#define D5 0x45
+#define D6 0x46
+#define D7 0x47
+#define E0 0x50
+#define E1 0x51
+#define E2 0x52
+#define E3 0x53
+#define E4 0x54
+#define E5 0x55
+#define E6 0x56
+#define E7 0x57
+#define F0 0x60
+#define F1 0x61
+#define F2 0x62
+#define F3 0x63
+#define F4 0x64
+#define F5 0x65
+#define F6 0x66
+#define F7 0x67
+
+#define COL2ROW 0x0
+#define ROW2COL 0x1
+
+#ifdef BLUETOOTH_ENABLE
+#ifdef __AVR_ATmega32U4__
+    #define SERIAL_UART_BAUD       9600
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B = (1<<TXEN1);                /* TX: enable */ \
+        UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+                 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
+		sei(); \
+    } while(0)
+#else
+#   error "USART configuration is needed."
+#endif
+
+
+// I'm fairly sure these aren't needed, but oh well - Jack
+
+/*
+ * PS/2 Interrupt configuration
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+#define PS2_INT_INIT()  do {    \
+    EICRA |= ((1<<ISC11) |      \
+              (0<<ISC10));      \
+} while (0)
+#define PS2_INT_ON()  do {      \
+    EIMSK |= (1<<INT1);         \
+} while (0)
+#define PS2_INT_OFF() do {      \
+    EIMSK &= ~(1<<INT1);        \
+} while (0)
+#define PS2_INT_VECT    INT1_vect
+#endif
+
+/*
+ * PS/2 Busywait configuration
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+#endif
+
+#endif
+
+#endif
+
-- 
cgit v1.2.3-24-g4f1b