From 39ece819791eed7f57e0a0492c1aa774be5c4b24 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 7 Jul 2017 11:56:01 -0400 Subject: delete old lufa --- .../LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c | 294 ------------- .../LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h | 84 ---- .../Bootloaders/MassStorage/Lib/VirtualFAT.c | 482 --------------------- .../Bootloaders/MassStorage/Lib/VirtualFAT.h | 302 ------------- 4 files changed, 1162 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c delete mode 100644 tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.h (limited to 'tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib') diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c deleted file mode 100644 index ace118a48..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage - * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, - * which wrap around standard SCSI device commands for controlling the actual storage medium. - */ - -#define INCLUDE_FROM_SCSI_C -#include "SCSI.h" - -/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's - * features and capabilities. - */ -static const SCSI_Inquiry_Response_t InquiryData = - { - .DeviceType = DEVICE_TYPE_BLOCK, - .PeripheralQualifier = 0, - - .Removable = true, - - .Version = 0, - - .ResponseDataFormat = 2, - .NormACA = false, - .TrmTsk = false, - .AERC = false, - - .AdditionalLength = 0x1F, - - .SoftReset = false, - .CmdQue = false, - .Linked = false, - .Sync = false, - .WideBus16Bit = false, - .WideBus32Bit = false, - .RelAddr = false, - - .VendorID = "LUFA", - .ProductID = "Bootloader", - .RevisionID = {'0','.','0','0'}, - }; - -/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE - * command is issued. This gives information on exactly why the last command failed to complete. - */ -static SCSI_Request_Sense_Response_t SenseData = - { - .ResponseCode = 0x70, - .AdditionalLength = 0x0A, - }; - - -/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches - * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns - * a command failure due to a ILLEGAL REQUEST. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise - */ -bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess = false; - - /* Run the appropriate SCSI command hander function based on the passed command */ - switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) - { - case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); - break; - case SCSI_CMD_REQUEST_SENSE: - CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); - break; - case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); - break; - case SCSI_CMD_WRITE_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); - break; - case SCSI_CMD_READ_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); - break; - case SCSI_CMD_MODE_SENSE_6: - CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); - break; - case SCSI_CMD_START_STOP_UNIT: -#if !defined(NO_APP_START_ON_EJECT) - /* If the user ejected the volume, signal bootloader exit at next opportunity. */ - RunBootloader = ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[4] & 0x03) != 0x02); -#endif - case SCSI_CMD_SEND_DIAGNOSTIC: - case SCSI_CMD_TEST_UNIT_READY: - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - case SCSI_CMD_VERIFY_10: - /* These commands should just succeed, no handling required */ - CommandSuccess = true; - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - break; - default: - /* Update the SENSE key to reflect the invalid command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_COMMAND, - SCSI_ASENSEQ_NO_QUALIFIER); - break; - } - - /* Check if command was successfully processed */ - if (CommandSuccess) - { - SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return true; - } - - return false; -} - -/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features - * and capabilities to the host. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); - uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); - - /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ - if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || - MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) - { - /* Optional but unsupported bits set - update the SENSE key and fail the request */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); - - /* Pad out remaining bytes with 0x00 */ - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, - * including the error code and additional error information so that the host can determine why a command failed to complete. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; - uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); - - Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity - * on the selected Logical Unit (drive), as a number of OS-sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - Endpoint_Write_32_BE(LUN_MEDIA_BLOCKS - 1); - Endpoint_Write_32_BE(SECTOR_SIZE_BYTES); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - - return true; -} - -/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address - * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual - * reading and writing of the data. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead) -{ - uint16_t BlockAddress; - uint16_t TotalBlocks; - - /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ - BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); - - /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ - TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - - /* Check if the block address is outside the maximum allowable value for the LUN */ - if (BlockAddress >= LUN_MEDIA_BLOCKS) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ - for (uint16_t i = 0; i < TotalBlocks; i++) - { - if (IsDataRead == DATA_READ) - VirtualFAT_ReadBlock(BlockAddress + i); - else - VirtualFAT_WriteBlock(BlockAddress + i); - } - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * SECTOR_SIZE_BYTES); - - return true; -} - -/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about - * the SCSI device, as well as the device's Write Protect status. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Send an empty header response indicating Write Protect flag is off */ - Endpoint_Write_32_LE(0); - Endpoint_ClearIN(); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; - - return true; -} - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h deleted file mode 100644 index 3529fde60..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/SCSI.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for SCSI.c. - */ - -#ifndef _SCSI_H_ -#define _SCSI_H_ - - /* Includes: */ - #include - #include - - #include - - #include "../BootloaderMassStorage.h" - #include "../Descriptors.h" - #include "VirtualFAT.h" - - /* Macros: */ - /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This - * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about - * the last command failure) in a quick and easy manner. - * - * \param[in] Key New SCSI sense key to set the sense code to - * \param[in] Acode New SCSI additional sense key to set the additional sense code to - * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to - */ - #define SCSI_SET_SENSE(Key, Acode, Aqual) do { SenseData.SenseKey = (Key); \ - SenseData.AdditionalSenseCode = (Acode); \ - SenseData.AdditionalSenseQualifier = (Aqual); } while (0) - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ - #define DATA_READ true - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ - #define DATA_WRITE false - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ - #define DEVICE_TYPE_BLOCK 0x00 - - /* Function Prototypes: */ - bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; - - #if defined(INCLUDE_FROM_SCSI_C) - static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; - static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; - static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; - static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead) AUX_BOOT_SECTION; - static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; - #endif - -#endif - diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c deleted file mode 100644 index 907b4e5ff..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Virtualized FAT12 filesystem implementation, to perform self-programming - * in response to read and write requests to the virtual filesystem by the - * host PC. - */ - -#define INCLUDE_FROM_VIRTUAL_FAT_C -#include "VirtualFAT.h" - -/** FAT filesystem boot sector block, must be the first sector on the physical - * disk so that the host can identify the presence of a FAT filesystem. This - * block is truncated; normally a large bootstrap section is located near the - * end of the block for booting purposes however as this is not meant to be a - * bootable disk it is omitted for space reasons. - * - * \note When returning the boot block to the host, the magic signature 0xAA55 - * must be added to the very end of the block to identify it as a boot - * block. - */ -static const FATBootBlock_t BootBlock = - { - .Bootstrap = {0xEB, 0x3C, 0x90}, - .Description = "mkdosfs", - .SectorSize = SECTOR_SIZE_BYTES, - .SectorsPerCluster = SECTOR_PER_CLUSTER, - .ReservedSectors = 1, - .FATCopies = 2, - .RootDirectoryEntries = (SECTOR_SIZE_BYTES / sizeof(FATDirectoryEntry_t)), - .TotalSectors16 = LUN_MEDIA_BLOCKS, - .MediaDescriptor = 0xF8, - .SectorsPerFAT = 1, - .SectorsPerTrack = (LUN_MEDIA_BLOCKS % 64), - .Heads = (LUN_MEDIA_BLOCKS / 64), - .HiddenSectors = 0, - .TotalSectors32 = 0, - .PhysicalDriveNum = 0, - .ExtendedBootRecordSig = 0x29, - .VolumeSerialNumber = 0x12345678, - .VolumeLabel = "LUFA BOOT ", - .FilesystemIdentifier = "FAT12 ", - }; - -/** FAT 8.3 style directory entry, for the virtual FLASH contents file. */ -static FATDirectoryEntry_t FirmwareFileEntries[] = - { - /* Root volume label entry; disk label is contained in the Filename and - * Extension fields (concatenated) with a special attribute flag - other - * fields are ignored. Should be the same as the label in the boot block. - */ - [DISK_FILE_ENTRY_VolumeID] = - { - .MSDOS_Directory = - { - .Name = "LUFA BOOT ", - .Attributes = FAT_FLAG_VOLUME_NAME, - .Reserved = {0}, - .CreationTime = 0, - .CreationDate = 0, - .StartingCluster = 0, - .Reserved2 = 0, - } - }, - - /* VFAT Long File Name entry for the virtual firmware file; required to - * prevent corruption from systems that are unable to detect the device - * as being a legacy MSDOS style FAT12 volume. */ - [DISK_FILE_ENTRY_FLASH_LFN] = - { - .VFAT_LongFileName = - { - .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, - .Attribute = FAT_FLAG_LONG_FILE_NAME, - .Reserved1 = 0, - .Reserved2 = 0, - - .Checksum = FAT_CHECKSUM('F','L','A','S','H',' ',' ',' ','B','I','N'), - - .Unicode1 = 'F', - .Unicode2 = 'L', - .Unicode3 = 'A', - .Unicode4 = 'S', - .Unicode5 = 'H', - .Unicode6 = '.', - .Unicode7 = 'B', - .Unicode8 = 'I', - .Unicode9 = 'N', - .Unicode10 = 0, - .Unicode11 = 0, - .Unicode12 = 0, - .Unicode13 = 0, - } - }, - - /* MSDOS file entry for the virtual Firmware image. */ - [DISK_FILE_ENTRY_FLASH_MSDOS] = - { - .MSDOS_File = - { - .Filename = "FLASH ", - .Extension = "BIN", - .Attributes = 0, - .Reserved = {0}, - .CreationTime = FAT_TIME(1, 1, 0), - .CreationDate = FAT_DATE(14, 2, 1989), - .StartingCluster = 2, - .FileSizeBytes = FLASH_FILE_SIZE_BYTES, - } - }, - - [DISK_FILE_ENTRY_EEPROM_LFN] = - { - .VFAT_LongFileName = - { - .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, - .Attribute = FAT_FLAG_LONG_FILE_NAME, - .Reserved1 = 0, - .Reserved2 = 0, - - .Checksum = FAT_CHECKSUM('E','E','P','R','O','M',' ',' ','B','I','N'), - - .Unicode1 = 'E', - .Unicode2 = 'E', - .Unicode3 = 'P', - .Unicode4 = 'R', - .Unicode5 = 'O', - .Unicode6 = 'M', - .Unicode7 = '.', - .Unicode8 = 'B', - .Unicode9 = 'I', - .Unicode10 = 'N', - .Unicode11 = 0, - .Unicode12 = 0, - .Unicode13 = 0, - } - }, - - [DISK_FILE_ENTRY_EEPROM_MSDOS] = - { - .MSDOS_File = - { - .Filename = "EEPROM ", - .Extension = "BIN", - .Attributes = 0, - .Reserved = {0}, - .CreationTime = FAT_TIME(1, 1, 0), - .CreationDate = FAT_DATE(14, 2, 1989), - .StartingCluster = 2 + FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES), - .FileSizeBytes = EEPROM_FILE_SIZE_BYTES, - } - }, - }; - -/** Starting cluster of the virtual FLASH.BIN file on disk, tracked so that the - * offset from the start of the data sector can be determined. On Windows - * systems files are usually replaced using the original file's disk clusters, - * while Linux appears to overwrite with an offset which must be compensated for. - */ -static const uint16_t* FLASHFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_FLASH_MSDOS].MSDOS_File.StartingCluster; - -/** Starting cluster of the virtual EEPROM.BIN file on disk, tracked so that the - * offset from the start of the data sector can be determined. On Windows - * systems files are usually replaced using the original file's disk clusters, - * while Linux appears to overwrite with an offset which must be compensated for. - */ -static const uint16_t* EEPROMFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_EEPROM_MSDOS].MSDOS_File.StartingCluster; - -/** Reads a byte of EEPROM out from the EEPROM memory space. - * - * \note This function is required as the avr-libc EEPROM functions do not cope - * with linker relaxations, and a jump longer than 4K of FLASH on the - * larger USB AVRs will break the linker. This function is marked as - * never inlinable and placed into the normal text segment so that the - * call to the EEPROM function will be short even if the AUX boot section - * is used. - * - * \param[in] Address Address of the EEPROM location to read from - * - * \return Read byte of EEPROM data. - */ -static uint8_t ReadEEPROMByte(const uint8_t* const Address) -{ - return eeprom_read_byte(Address); -} - -/** Writes a byte of EEPROM out to the EEPROM memory space. - * - * \note This function is required as the avr-libc EEPROM functions do not cope - * with linker relaxations, and a jump longer than 4K of FLASH on the - * larger USB AVRs will break the linker. This function is marked as - * never inlinable and placed into the normal text segment so that the - * call to the EEPROM function will be short even if the AUX boot section - * is used. - * - * \param[in] Address Address of the EEPROM location to write to - * \param[in] Data New data to write to the EEPROM location - */ -static void WriteEEPROMByte(uint8_t* const Address, - const uint8_t Data) -{ - eeprom_update_byte(Address, Data); -} - -/** Updates a FAT12 cluster entry in the FAT file table with the specified next - * chain index. If the cluster is the last in the file chain, the magic value - * \c 0xFFF should be used. - * - * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the - * first file data cluster on the disk. See the FAT specification. - * - * \param[out] FATTable Pointer to the FAT12 allocation table - * \param[in] Index Index of the cluster entry to update - * \param[in] ChainEntry Next cluster index in the file chain - */ -static void UpdateFAT12ClusterEntry(uint8_t* const FATTable, - const uint16_t Index, - const uint16_t ChainEntry) -{ - /* Calculate the starting offset of the cluster entry in the FAT12 table */ - uint8_t FATOffset = (Index + (Index >> 1)); - bool UpperNibble = ((Index & 1) != 0); - - /* Check if the start of the entry is at an upper nibble of the byte, fill - * out FAT12 entry as required */ - if (UpperNibble) - { - FATTable[FATOffset] = (FATTable[FATOffset] & 0x0F) | ((ChainEntry & 0x0F) << 4); - FATTable[FATOffset + 1] = (ChainEntry >> 4); - } - else - { - FATTable[FATOffset] = ChainEntry; - FATTable[FATOffset + 1] = (FATTable[FATOffset] & 0xF0) | (ChainEntry >> 8); - } -} - -/** Updates a FAT12 cluster chain in the FAT file table with a linear chain of - * the specified length. - * - * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the - * first file data cluster on the disk. See the FAT specification. - * - * \param[out] FATTable Pointer to the FAT12 allocation table - * \param[in] Index Index of the start of the cluster chain to update - * \param[in] ChainLength Length of the chain to write, in clusters - */ -static void UpdateFAT12ClusterChain(uint8_t* const FATTable, - const uint16_t Index, - const uint8_t ChainLength) -{ - for (uint8_t i = 0; i < ChainLength; i++) - { - uint16_t CurrentCluster = Index + i; - uint16_t NextCluster = CurrentCluster + 1; - - /* Mark last cluster as end of file */ - if (i == (ChainLength - 1)) - NextCluster = 0xFFF; - - UpdateFAT12ClusterEntry(FATTable, CurrentCluster, NextCluster); - } -} - -/** Reads or writes a block of data from/to the physical device FLASH using a - * block buffer stored in RAM, if the requested block is within the virtual - * firmware file's sector ranges in the emulated FAT file system. - * - * \param[in] BlockNumber Physical disk block to read from/write to - * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM - * \param[in] Read If \c true, the requested block is read, if - * \c false, the requested block is written - */ -static void ReadWriteFLASHFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) -{ - uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*FLASHFileStartCluster - 2) * SECTOR_PER_CLUSTER; - uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(FLASH_FILE_SIZE_BYTES) - 1); - - /* Range check the write request - abort if requested block is not within the - * virtual firmware file sector range */ - if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) - return; - - #if (FLASHEND > 0xFFFF) - uint32_t FlashAddress = (uint32_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - #else - uint16_t FlashAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - #endif - - if (Read) - { - /* Read out the mapped block of data from the device's FLASH */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - { - #if (FLASHEND > 0xFFFF) - BlockBuffer[i] = pgm_read_byte_far(FlashAddress++); - #else - BlockBuffer[i] = pgm_read_byte(FlashAddress++); - #endif - } - } - else - { - /* Write out the mapped block of data to the device's FLASH */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i += 2) - { - if ((FlashAddress % SPM_PAGESIZE) == 0) - { - /* Erase the given FLASH page, ready to be programmed */ - BootloaderAPI_ErasePage(FlashAddress); - } - - /* Write the next data word to the FLASH page */ - BootloaderAPI_FillWord(FlashAddress, (BlockBuffer[i + 1] << 8) | BlockBuffer[i]); - FlashAddress += 2; - - if ((FlashAddress % SPM_PAGESIZE) == 0) - { - /* Write the filled FLASH page to memory */ - BootloaderAPI_WritePage(FlashAddress - SPM_PAGESIZE); - } - } - } -} - -/** Reads or writes a block of data from/to the physical device EEPROM using a - * block buffer stored in RAM, if the requested block is within the virtual - * firmware file's sector ranges in the emulated FAT file system. - * - * \param[in] BlockNumber Physical disk block to read from/write to - * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM - * \param[in] Read If \c true, the requested block is read, if - * \c false, the requested block is written - */ -static void ReadWriteEEPROMFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) -{ - uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*EEPROMFileStartCluster - 2) * SECTOR_PER_CLUSTER; - uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(EEPROM_FILE_SIZE_BYTES) - 1); - - /* Range check the write request - abort if requested block is not within the - * virtual firmware file sector range */ - if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) - return; - - uint16_t EEPROMAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; - - if (Read) - { - /* Read out the mapped block of data from the device's EEPROM */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - BlockBuffer[i] = ReadEEPROMByte((uint8_t*)EEPROMAddress++); - } - else - { - /* Write out the mapped block of data to the device's EEPROM */ - for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) - WriteEEPROMByte((uint8_t*)EEPROMAddress++, BlockBuffer[i]); - } -} - -/** Writes a block of data to the virtual FAT filesystem, from the USB Mass - * Storage interface. - * - * \param[in] BlockNumber Index of the block to write. - */ -void VirtualFAT_WriteBlock(const uint16_t BlockNumber) -{ - uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; - - /* Buffer the entire block to be written from the host */ - Endpoint_Read_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); - Endpoint_ClearOUT(); - - switch (BlockNumber) - { - case DISK_BLOCK_BootBlock: - case DISK_BLOCK_FATBlock1: - case DISK_BLOCK_FATBlock2: - /* Ignore writes to the boot and FAT blocks */ - - break; - - case DISK_BLOCK_RootFilesBlock: - /* Copy over the updated directory entries */ - memcpy(FirmwareFileEntries, BlockBuffer, sizeof(FirmwareFileEntries)); - - break; - - default: - ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, false); - ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, false); - - break; - } -} - -/** Reads a block of data from the virtual FAT filesystem, and sends it to the - * host via the USB Mass Storage interface. - * - * \param[in] BlockNumber Index of the block to read. - */ -void VirtualFAT_ReadBlock(const uint16_t BlockNumber) -{ - uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; - memset(BlockBuffer, 0x00, sizeof(BlockBuffer)); - - switch (BlockNumber) - { - case DISK_BLOCK_BootBlock: - memcpy(BlockBuffer, &BootBlock, sizeof(FATBootBlock_t)); - - /* Add the magic signature to the end of the block */ - BlockBuffer[SECTOR_SIZE_BYTES - 2] = 0x55; - BlockBuffer[SECTOR_SIZE_BYTES - 1] = 0xAA; - - break; - - case DISK_BLOCK_FATBlock1: - case DISK_BLOCK_FATBlock2: - /* Cluster 0: Media type/Reserved */ - UpdateFAT12ClusterEntry(BlockBuffer, 0, 0xF00 | BootBlock.MediaDescriptor); - - /* Cluster 1: Reserved */ - UpdateFAT12ClusterEntry(BlockBuffer, 1, 0xFFF); - - /* Cluster 2 onwards: Cluster chain of FLASH.BIN */ - UpdateFAT12ClusterChain(BlockBuffer, *FLASHFileStartCluster, FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES)); - - /* Cluster 2+n onwards: Cluster chain of EEPROM.BIN */ - UpdateFAT12ClusterChain(BlockBuffer, *EEPROMFileStartCluster, FILE_CLUSTERS(EEPROM_FILE_SIZE_BYTES)); - - break; - - case DISK_BLOCK_RootFilesBlock: - memcpy(BlockBuffer, FirmwareFileEntries, sizeof(FirmwareFileEntries)); - - break; - - default: - ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, true); - ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, true); - - break; - } - - /* Write the entire read block Buffer to the host */ - Endpoint_Write_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); - Endpoint_ClearIN(); -} diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.h b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.h deleted file mode 100644 index 380132c53..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/Lib/VirtualFAT.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _VIRTUALFAT_H_ -#define _VIRTUALFAT_H_ - - /* Includes: */ - #include - #include - - #include - - #include "../BootloaderAPI.h" - - /* Macros: */ - /** Size of the virtual FLASH.BIN file in bytes. */ - #define FLASH_FILE_SIZE_BYTES (FLASHEND - (FLASHEND - BOOT_START_ADDR) - AUX_BOOT_SECTION_SIZE) - - /** Size of the virtual EEPROM.BIN file in bytes. */ - #define EEPROM_FILE_SIZE_BYTES E2END - - /** Number of sectors that comprise a single logical disk cluster. */ - #define SECTOR_PER_CLUSTER 4 - - /** Size of a single logical sector on the disk. */ - #define SECTOR_SIZE_BYTES 512 - - /** Size of a logical cluster on the disk, in bytes */ - #define CLUSTER_SIZE_BYTES (SECTOR_PER_CLUSTER * SECTOR_SIZE_BYTES) - - /** Number of sectors required to store a given size in bytes. - * - * \param[in] size Size of the data that needs to be stored - * - * \return Number of sectors required to store the given data on the disk. - */ - #define FILE_SECTORS(size) ((size / SECTOR_SIZE_BYTES) + ((size % SECTOR_SIZE_BYTES) ? 1 : 0)) - - /** Number of clusters required to store a given size in bytes. - * - * \param[in] size Size of the data that needs to be stored - * - * \return Number of clusters required to store the given data on the disk. - */ - #define FILE_CLUSTERS(size) ((size / CLUSTER_SIZE_BYTES) + ((size % CLUSTER_SIZE_BYTES) ? 1 : 0)) - - /** Total number of logical sectors/blocks on the disk. */ - #define LUN_MEDIA_BLOCKS (FILE_SECTORS(FLASH_FILE_SIZE_BYTES) + FILE_SECTORS(EEPROM_FILE_SIZE_BYTES) + 32) - - /** Converts a given time in HH:MM:SS format to a FAT filesystem time. - * - * \note The minimum seconds resolution of FAT is 2, thus odd seconds - * will be truncated to the previous integer multiple of 2 seconds. - * - * \param[in] hh Hours (0-23) - * \param[in] mm Minutes (0-59) - * \param[in] ss Seconds (0-59) - * - * \return Given time encoded as a FAT filesystem timestamp - */ - #define FAT_TIME(hh, mm, ss) ((hh << 11) | (mm << 5) | (ss >> 1)) - - /** Converts a given date in DD/MM/YYYY format to a FAT filesystem date. - * - * \param[in] dd Days in the month (1-31) - * \param[in] mm Months in the year (1-12) - * \param[in] yyyy Year (1980 - 2107) - * - * \return Given date encoded as a FAT filesystem datestamp - */ - #define FAT_DATE(dd, mm, yyyy) (((yyyy - 1980) << 9) | (mm << 5) | (dd << 0)) - - /** Bit-rotates a given 8-bit value once to the right. - * - * \param x Value to rotate right once - * - * \return Bit-rotated input value, rotated once to the right. - */ - #define _ROT8(x) ((((x) & 0xFE) >> 1) | (((x) & 1) ? 0x80 : 0x00)) - - /** Computes the LFN entry checksum of a MSDOS 8.3 format file entry, - * to associate a LFN entry with its short file entry. - * - * \param n0 MSDOS Filename character 1 - * \param n1 MSDOS Filename character 2 - * \param n2 MSDOS Filename character 3 - * \param n3 MSDOS Filename character 4 - * \param n4 MSDOS Filename character 5 - * \param n5 MSDOS Filename character 6 - * \param n6 MSDOS Filename character 7 - * \param n7 MSDOS Filename character 8 - * \param e0 MSDOS Extension character 1 - * \param e1 MSDOS Extension character 2 - * \param e2 MSDOS Extension character 3 - * - * \return LFN checksum of the given MSDOS 8.3 filename. - */ - #define FAT_CHECKSUM(n0, n1, n2, n3, n4, n5, n6, n7, e0, e1, e2) \ - (uint8_t)(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(_ROT8(n0)+n1)+n2)+n3)+n4)+n5)+n6)+n7)+e0)+e1)+e2) - - /** \name FAT Filesystem Flags */ - //@{ - /** FAT attribute flag to indicate a read-only file. */ - #define FAT_FLAG_READONLY (1 << 0) - - /** FAT attribute flag to indicate a hidden file. */ - #define FAT_FLAG_HIDDEN (1 << 1) - - /** FAT attribute flag to indicate a system file. */ - #define FAT_FLAG_SYSTEM (1 << 2) - - /** FAT attribute flag to indicate a Volume name entry. */ - #define FAT_FLAG_VOLUME_NAME (1 << 3) - - /** FAT attribute flag to indicate a directory entry. */ - #define FAT_FLAG_DIRECTORY (1 << 4) - - /** FAT attribute flag to indicate a file ready for archiving. */ - #define FAT_FLAG_ARCHIVE (1 << 5) - - /** FAT pseudo-attribute flag to indicate a Long File Name entry. */ - #define FAT_FLAG_LONG_FILE_NAME 0x0F - - /** Ordinal flag marker for FAT Long File Name entries to mark the last entry. */ - #define FAT_ORDINAL_LAST_ENTRY (1 << 6) - //@} - - /* Enums: */ - /** Enum for the Root FAT file entry indexes on the disk. This can be used - * to retrieve the current contents of a known directory entry. - */ - enum - { - /** Volume ID directory entry, giving the name of the virtual disk. */ - DISK_FILE_ENTRY_VolumeID = 0, - /** Long File Name FAT file entry of the virtual FLASH.BIN image file. */ - DISK_FILE_ENTRY_FLASH_LFN = 1, - /** Legacy MSDOS FAT file entry of the virtual FLASH.BIN image file. */ - DISK_FILE_ENTRY_FLASH_MSDOS = 2, - /** Long File Name FAT file entry of the virtual EEPROM.BIN image file. */ - DISK_FILE_ENTRY_EEPROM_LFN = 3, - /** Legacy MSDOS FAT file entry of the virtual EEPROM.BIN image file. */ - DISK_FILE_ENTRY_EEPROM_MSDOS = 4, - }; - - /** Enum for the physical disk blocks of the virtual disk. */ - enum - { - /** Boot sector disk block. */ - DISK_BLOCK_BootBlock = 0, - /** First copy of the FAT table block. */ - DISK_BLOCK_FATBlock1 = 1, - /** Second copy of the FAT table block. */ - DISK_BLOCK_FATBlock2 = 2, - /** Root file and directory entries block. */ - DISK_BLOCK_RootFilesBlock = 3, - /** Start block of the disk data section. */ - DISK_BLOCK_DataStartBlock = 4, - }; - - /* Type Definitions: */ - /** FAT boot block structure definition, used to identify the core - * parameters of a FAT file system stored on a disk. - * - * \note This definition is truncated to save space; the magic signature - * \c 0xAA55 must be appended to the very end of the block for it - * to be detected by the host as a valid boot block. - */ - typedef struct - { - uint8_t Bootstrap[3]; - uint8_t Description[8]; - uint16_t SectorSize; - uint8_t SectorsPerCluster; - uint16_t ReservedSectors; - uint8_t FATCopies; - uint16_t RootDirectoryEntries; - uint16_t TotalSectors16; - uint8_t MediaDescriptor; - uint16_t SectorsPerFAT; - uint16_t SectorsPerTrack; - uint16_t Heads; - uint32_t HiddenSectors; - uint32_t TotalSectors32; - uint16_t PhysicalDriveNum; - uint8_t ExtendedBootRecordSig; - uint32_t VolumeSerialNumber; - uint8_t VolumeLabel[11]; - uint8_t FilesystemIdentifier[8]; - /* uint8_t BootstrapProgram[448]; */ - /* uint16_t MagicSignature; */ - } FATBootBlock_t; - - /** FAT directory entry structure, for the various kinds of File and - * directory descriptors on a FAT disk. - */ - typedef union - { - /** VFAT Long File Name file entry. */ - struct - { - uint8_t Ordinal; - uint16_t Unicode1; - uint16_t Unicode2; - uint16_t Unicode3; - uint16_t Unicode4; - uint16_t Unicode5; - uint8_t Attribute; - uint8_t Reserved1; - uint8_t Checksum; - uint16_t Unicode6; - uint16_t Unicode7; - uint16_t Unicode8; - uint16_t Unicode9; - uint16_t Unicode10; - uint16_t Unicode11; - uint16_t Reserved2; - uint16_t Unicode12; - uint16_t Unicode13; - } VFAT_LongFileName; - - /** Legacy FAT MSDOS 8.3 file entry. */ - struct - { - uint8_t Filename[8]; - uint8_t Extension[3]; - uint8_t Attributes; - uint8_t Reserved[10]; - uint16_t CreationTime; - uint16_t CreationDate; - uint16_t StartingCluster; - uint32_t FileSizeBytes; - } MSDOS_File; - - /** Legacy FAT MSDOS (sub-)directory entry. */ - struct - { - uint8_t Name[11]; - uint8_t Attributes; - uint8_t Reserved[10]; - uint16_t CreationTime; - uint16_t CreationDate; - uint16_t StartingCluster; - uint32_t Reserved2; - } MSDOS_Directory; - } FATDirectoryEntry_t; - - /* Function Prototypes: */ - #if defined(INCLUDE_FROM_VIRTUAL_FAT_C) - static uint8_t ReadEEPROMByte(const uint8_t* const Address) ATTR_NO_INLINE; - - static void WriteEEPROMByte(uint8_t* const Address, - const uint8_t Data) ATTR_NO_INLINE; - - static void UpdateFAT12ClusterEntry(uint8_t* const FATTable, - const uint16_t Index, - const uint16_t ChainEntry) AUX_BOOT_SECTION; - - static void UpdateFAT12ClusterChain(uint8_t* const FATTable, - const uint16_t StartIndex, - const uint8_t ChainLength) AUX_BOOT_SECTION; - - static void ReadWriteFLASHFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) AUX_BOOT_SECTION; - - static void ReadWriteEEPROMFileBlock(const uint16_t BlockNumber, - uint8_t* BlockBuffer, - const bool Read) AUX_BOOT_SECTION; - #endif - - void VirtualFAT_WriteBlock(const uint16_t BlockNumber) AUX_BOOT_SECTION; - void VirtualFAT_ReadBlock(const uint16_t BlockNumber) AUX_BOOT_SECTION; - -#endif -- cgit v1.2.3-24-g4f1b