From 39ece819791eed7f57e0a0492c1aa774be5c4b24 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 7 Jul 2017 11:56:01 -0400 Subject: delete old lufa --- .../protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h | 422 --------------------- 1 file changed, 422 deletions(-) delete mode 100644 tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h (limited to 'tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h') diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h deleted file mode 100644 index a8df26fd1..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/USB.h +++ /dev/null @@ -1,422 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Master include file for the library USB functionality. - * - * Master include file for the library USB functionality. - * - * This file should be included in all user projects making use of the USB portions of the library, instead of - * the individual USB driver submodule headers. - */ - -/** \defgroup Group_USB USB Core - LUFA/Drivers/USB/USB.h - * - * \brief Core driver for the microcontroller hardware USB module - * - * \section Sec_USB_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Core/ConfigDescriptors.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/DeviceStandardReq.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/Events.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/HostStandardReq.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/USBTask.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/Device_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/Endpoint_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/EndpointStream_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/Host_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/Pipe_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/PipeStream_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/USBController_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Core/ARCH/USBInterrupt_ARCH.c (Makefile source module name: LUFA_SRC_USB) - * - LUFA/Drivers/USB/Class/Common/HIDParser.c (Makefile source module name: LUFA_SRC_USB) - * - * \section Sec_USB_ModDescription Module Description - * Driver and framework for the USB controller of the selected architecture and microcontroller model. This module - * consists of many submodules, and is designed to provide an easy way to configure and control USB host, device - * or OTG mode USB applications. - * - * The USB stack requires the sole control over the USB controller in the microcontroller only; i.e. it does not - * require any additional timers or other peripherals to operate. This ensures that the USB stack requires as few - * resources as possible. - * - * The USB stack can be used in Device Mode for connections to USB Hosts (see \ref Group_Device), in Host mode for - * hosting of other USB devices (see \ref Group_Host), or as a dual role device which can either act as a USB host - * or device depending on what peripheral is connected (see \ref Group_OTG). Both modes also require a common set - * of USB management functions found \ref Group_USBManagement. - */ - -/** \defgroup Group_USBClassDrivers USB Class Drivers - * - * \brief Drivers for the various standardized USB device classes - * - * Drivers for both host and device mode of the standard USB classes, for rapid application development. - * Class drivers give a framework which sits on top of the low level library API, allowing for standard - * USB classes to be implemented in a project with minimal user code. These drivers can be used in - * conjunction with the library low level APIs to implement interfaces both via the class drivers and via - * the standard library APIs. - * - * Multiple device mode class drivers can be used within a project, including multiple instances of the - * same class driver. In this way, USB Hosts and Devices can be made quickly using the internal class drivers - * so that more time and effort can be put into the end application instead of the USB protocol. - * - * The available class drivers and their modes are listed below. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB ClassDevice ModeHost Mode
Android Open AccessoryNoYes
Audio 1.0YesYes
CDC-ACMYesYes
HIDYesYes
MIDIYesYes
Mass StorageYesYes
PrinterYesYes
RNDISYesYes
Still ImageNoYes
- * - * - * \section Sec_USB_UsingClassDrivers Using the Class Drivers - * To make the Class drivers easy to integrate into a user application, they all implement a standardized - * design with similarly named/used function, enums, defines and types. The two different modes are implemented - * slightly differently, and thus will be explained separately. For information on a specific class driver, read - * the class driver's module documentation. - * - * \subsection Sec_USB_ClassDriverDevice Device Mode Class Drivers - * Implementing a Device Mode Class Driver in a user application requires a number of steps to be followed. Firstly, - * the module configuration and state structure must be added to the project source. These structures are named in a - * similar manner between classes, that of USB_ClassInfo_{Class Name}_Device_t, and are used to hold the - * complete state and configuration for each class instance. Multiple class instances is where the power of the class - * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_* - * structure. - * - * Inside the ClassInfo structure lies two sections, a \c Config section, and a \c State section. The \c Config - * section contains the instance's configuration parameters, and must have all fields set by the user application - * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters - * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. - * - * The following is an example of a properly initialized instance of the Audio Class Driver structure: - * - * \code - * USB_ClassInfo_Audio_Device_t My_Audio_Interface = - * { - * .Config = - * { - * .StreamingInterfaceNumber = 1, - * .DataINEndpoint = - * { - * .Address = (ENDPOINT_DIR_IN | 1), - * .Size = 64, - * .Banks = 1, - * }, - * }, - * }; - * \endcode - * - * \note The class driver's configuration parameters should match those used in the device's descriptors that are - * sent to the host. - * - * To initialize the Class driver instance, the driver's {Class Name}_Device_ConfigureEndpoints() function - * should be called in response to the \ref EVENT_USB_Device_ConfigurationChanged() event. This function will return a - * boolean true value if the driver successfully initialized the instance. Like all the class driver functions, this function - * takes in the address of the specific instance you wish to initialize - in this manner, multiple separate instances of - * the same class type can be initialized like this: - * - * \code - * void EVENT_USB_Device_ConfigurationChanged(void) - * { - * LEDs_SetAllLEDs(LEDMASK_USB_READY); - * - * if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface))) - * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - * } - * \endcode - * - * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's - * {Class Name}_Device_USBTask() function in the main program loop. The exact implementation of this - * function varies between class drivers, and can be used for any internal class driver purpose to maintain each - * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each - * separate instance, just like the main USB maintenance routine \ref USB_USBTask(): - * - * \code - * int main(void) - * { - * SetupHardware(); - * - * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - * - * for (;;) - * { - * if (USB_DeviceState != DEVICE_STATE_Configured) - * Create_And_Process_Samples(); - * - * Audio_Device_USBTask(&My_Audio_Interface); - * USB_USBTask(); - * } - * } - * \endcode - * - * The final standardized Device Class Driver function is the Control Request handler function - * {Class Name}_Device_ProcessControlRequest(), which should be called when the - * \ref EVENT_USB_Device_ControlRequest() event fires. This function should also be called for - * each class driver instance, using the address of the instance to operate on as the function's - * parameter. The request handler will abort if it is determined that the current request is not - * targeted at the given class driver instance, thus these methods can safely be called - * one-after-another in the event handler with no form of error checking: - * - * \code - * void EVENT_USB_Device_ControlRequest(void) - * { - * Audio_Device_ProcessControlRequest(&My_Audio_Interface); - * } - * \endcode - * - * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_* - * in the function's name) which must also be added to the user application - refer to each - * individual class driver's documentation for mandatory callbacks. In addition, each class driver may - * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which - * the user application may choose to implement, or ignore if not needed. - * - * The individual Device Mode Class Driver documentation contains more information on the non-standardized, - * class-specific functions which the user application can then use on the driver instances, such as data - * read and write routines. See each driver's individual documentation for more information on the - * class-specific functions. - * - * \subsection Sec_USB_ClassDriverHost Host Mode Class Drivers - * Implementing a Host Mode Class Driver in a user application requires a number of steps to be followed. Firstly, - * the module configuration and state structure must be added to the project source. These structures are named in a - * similar manner between classes, that of USB_ClassInfo_{Class Name}_Host_t, and are used to hold the - * complete state and configuration for each class instance. Multiple class instances is where the power of the class - * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_* - * structure. - * - * Inside the \c USB_ClassInfo_* structure lies two sections, a \c Config section, and a \c State section. The \c Config - * section contains the instance's configuration parameters, and must have all fields set by the user application - * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters - * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. - * - * The following is an example of a properly initialized instance of the MIDI Host Class Driver structure: - * - * \code - * USB_ClassInfo_MIDI_Host_t My_MIDI_Interface = - * { - * .Config = - * { - * .DataINPipe = - * { - * .Address = (PIPE_DIR_IN | 1), - * .Size = 64, - * .Banks = 1, - * }, - * .DataOUTPipe = - * { - * .Address = (PIPE_DIR_OUT | 2), - * .Size = 64, - * .Banks = 1, - * }, - * }, - * }; - * \endcode - * - * To initialize the Class driver instance, the driver's {Class Name}_Host_ConfigurePipes() function - * should be called in response to the \c EVENT_USB_Host_DeviceEnumerationComplete() event firing. This function will - * will return an error code from the class driver's {Class Name}_EnumerationFailure_ErrorCodes_t enum - * to indicate if the driver successfully initialized the instance and bound it to an interface in the attached device. - * Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize - - * in this manner, multiple separate instances of the same class type can be initialized. A fragment of a Class Driver - * based Host mode application may look like the following: - * - * \code - * void EVENT_USB_Host_DeviceEnumerationComplete(void) - * { - * LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - * - * uint16_t ConfigDescriptorSize; - * uint8_t ConfigDescriptorData[512]; - * - * if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, - * sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) - * { - * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - * return; - * } - * - * if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface, - * ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError) - * { - * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - * return; - * } - * - * if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) - * { - * LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - * return; - * } - * - * LEDs_SetAllLEDs(LEDMASK_USB_READY); - * } - * \endcode - * - * Note that the function also requires the device's configuration descriptor so that it can determine which interface - * in the device to bind to - this can be retrieved as shown in the above fragment using the - * \ref USB_Host_GetDeviceConfigDescriptor() function. If the device does not implement the interface the class driver - * is looking for, if all the matching interfaces are already bound to class driver instances or if an error occurs while - * binding to a device interface (for example, a device endpoint bank larger that the maximum supported bank size is used) - * the configuration will fail. - * - * To complete the device enumeration after binding the host mode Class Drivers to the attached device, a call to - * \c USB_Host_SetDeviceConfiguration() must be made. If the device configuration is not set within the - * \c EVENT_USB_Host_DeviceEnumerationComplete() event, the host still will assume the device enumeration has failed. - * - * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's - * {Class Name}_Host_USBTask() function in the main program loop. The exact implementation of this - * function varies between class drivers, and can be used for any internal class driver purpose to maintain each - * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each - * separate instance, just like the main USB maintenance routine \ref USB_USBTask(): - * - * \code - * int main(void) - * { - * SetupHardware(); - * - * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - * - * for (;;) - * { - * if (USB_HostState != HOST_STATE_Configured) - * Create_And_Process_Samples(); - * - * MIDI_Host_USBTask(&My_Audio_Interface); - * USB_USBTask(); - * } - * } - * \endcode - * - * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_* - * in the function's name) which must also be added to the user application - refer to each - * individual class driver's documentation for mandatory callbacks. In addition, each class driver may - * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which - * the user application may choose to implement, or ignore if not needed. - * - * The individual Host Mode Class Driver documentation contains more information on the non-standardized, - * class-specific functions which the user application can then use on the driver instances, such as data - * read and write routines. See each driver's individual documentation for more information on the - * class-specific functions. - */ - -#ifndef __USB_H__ -#define __USB_H__ - - /* Macros: */ - #define __INCLUDE_FROM_USB_DRIVER - - /* Includes: */ - #include "../../Common/Common.h" - #include "Core/USBMode.h" - - /* Includes: */ - #include "Core/USBTask.h" - #include "Core/Events.h" - #include "Core/StdDescriptors.h" - #include "Core/ConfigDescriptors.h" - #include "Core/USBController.h" - #include "Core/USBInterrupt.h" - - #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) - #include "Core/Host.h" - #include "Core/Pipe.h" - #include "Core/HostStandardReq.h" - #include "Core/PipeStream.h" - #endif - - #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) - #include "Core/Device.h" - #include "Core/Endpoint.h" - #include "Core/DeviceStandardReq.h" - #include "Core/EndpointStream.h" - #endif - - #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) - #include "Core/OTG.h" - #endif - - #include "Class/AndroidAccessoryClass.h" - #include "Class/AudioClass.h" - #include "Class/CDCClass.h" - #include "Class/HIDClass.h" - #include "Class/MassStorageClass.h" - #include "Class/MIDIClass.h" - #include "Class/PrinterClass.h" - #include "Class/RNDISClass.h" - #include "Class/StillImageClass.h" - -#endif - -- cgit v1.2.3-24-g4f1b