#ifndef DACTYL_H #define DACTYL_H #include "quantum.h" #include #include #include "i2cmaster.h" #include #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) #define CPU_16MHz 0x00 // I2C aliases and register addresses (see "mcp23018.md") #define I2C_ADDR 0b0100000 #define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) #define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) #define IODIRA 0x00 // i/o direction register #define IODIRB 0x01 #define GPPUA 0x0C // GPIO pull-up resistor register #define GPPUB 0x0D #define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) #define GPIOB 0x13 #define OLATA 0x14 // output latch register #define OLATB 0x15 extern uint8_t mcp23018_status; void init_dactyl(void); uint8_t init_mcp23018(void); #define KEYMAP( \ \ /* left hand, spatial positions */ \ k00,k01,k02,k03,k04,k05, \ k10,k11,k12,k13,k14,k15, \ k20,k21,k22,k23,k24,k25, \ k30,k31,k32,k33,k34,k35, \ k40,k41,k42,k43,k44, \ k55,k50, \ k54, \ k53,k52,k51, \ \ /* right hand, spatial positions */ \ k06,k07,k08,k09,k0A,k0B, \ k16,k17,k18,k19,k1A,k1B, \ k26,k27,k28,k29,k2A,k2B, \ k36,k37,k38,k39,k3A,k3B, \ k47,k48,k49,k4A,k4B, \ k5B,k56, \ k57, \ k5A,k59,k58 ) \ \ /* matrix positions */ \ { \ { k00, k10, k20, k30, k40, k50 }, \ { k01, k11, k21, k31, k41, k51 }, \ { k02, k12, k22, k32, k42, k52 }, \ { k03, k13, k23, k33, k43, k53 }, \ { k04, k14, k24, k34, k44, k54 }, \ { k05, k15, k25, k35, KC_NO, k55 }, \ \ { k06, k16, k26, k36, KC_NO, k56 }, \ { k07, k17, k27, k37, k47, k57 }, \ { k08, k18, k28, k38, k48, k58 }, \ { k09, k19, k29, k39, k49, k59 }, \ { k0A, k1A, k2A, k3A, k4A, k5A }, \ { k0B, k1B, k2B, k3B, k4B, k5B } \ } #define LAYOUT_dactyl KEYMAP #endif