# project specific files
SRC =	keyboards/zeal60/zeal60.c \
		keyboards/zeal60/rgb_backlight.c \
		drivers/issi/is31fl3733.c \
		quantum/color.c \
		drivers/arm/i2c_master.c

## chip/board settings
#   the next two should match the directories in
#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F3xx

# Linker script to use
#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
#   or <this_dir>/ld/
MCU_LDSCRIPT = STM32F303xC

# Startup code to use
#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f3xx

# Board: it should exist either in <chibios>/os/hal/boards/
#  or <this_dir>/boards
BOARD = GENERIC_STM32_F303XC

# Cortex version
MCU  = cortex-m4

# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7

USE_FPU = yes

# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
OPT_DEFS =

# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN

# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS = -p DF11 -v 0483

# Build Options
#   comment out to disable the options.
#
BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
BOOTMAGIC_ENABLE = yes             # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes              # Mouse keys
EXTRAKEY_ENABLE = yes              # Audio control and System control
CONSOLE_ENABLE = no                # Console for debug
COMMAND_ENABLE = no                # Commands for debug and configuration
SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes                  # USB Nkey Rollover
AUDIO_ENABLE = no                  # Audio output on port C6
NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
#SERIAL_LINK_ENABLE = yes

RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes