# MxSS - Polycarb 65% Kit for MX/SMK ![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg) ### Information: - Case: Frosted Polycarbonate, CNC milled - Plate: Brass, mirror-finished and electroplated - Weight: Same as plate - PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish ### Details: - 2.9 degrees angle on the case - Top mount plate - Center USB, Type-B Mini - MX and SMK (White and Orange) switch support - Holtite support - RGB underglow - 1.5kg with plate and weight Keyboard Maintainer: [MxBlue](https://github.com/mxblu) Hardware Supported: Custom PCB, ATMega32u4 Hardware Availability: https://geekhack.org/index.php?topic=94986.0 Make example for this keyboard (after setting up your build environment): make mxss:default See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. # Front LED Operation The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes. There are 3 modes of operation: - FLED_OFF - Front LEDs stay off - FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request) - FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example). ## Custom Keycodes - FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI) - FLED_VAI - Increase front LED brightness - FLED_VAD - Decrease front LED brightness # Further Notes As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.