/* Copyright 2018 Jason Williams (Wilba) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x5241 // "RW" #define PRODUCT_ID 0x006B // 6-B #define DEVICE_VER 0x0001 #define MANUFACTURER RAMA.WORKS #define PRODUCT RAMA M6-B #define DESCRIPTION RAMA M6-B Macropad /* key matrix size */ #define MATRIX_ROWS 1 #define MATRIX_COLS 6 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { E6 } #define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } #define UNUSED_PINS /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is userful for the Windows task manager shortcut (ctrl+shift+esc). */ // #define GRAVE_ESC_CTRL_OVERRIDE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Magic Key Options * * Magic keys are hotkey commands that allow control over firmware functions of * the keyboard. They are best used in combination with the HID Listen program, * found here: https://www.pjrc.com/teensy/hid_listen.html * * The options below allow the magic key functionality to be changed. This is * useful if your keyboard/keypad is missing keys and you want magic key support. * */ #define RGB_BACKLIGHT_ENABLED 1 // This conditionally compiles the backlight code for M6-B specifics #define RGB_BACKLIGHT_M6_B // enable/disable LEDs based on layout #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 #define RGB_BACKLIGHT_USE_ISO_ENTER 0 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 // disable backlight when USB suspended (PC sleep/hibernate/shutdown) #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 // the default brightness #define RGB_BACKLIGHT_BRIGHTNESS 255 // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 // the default effect speed (0-3) #define RGB_BACKLIGHT_EFFECT_SPEED 0 // the default color1 and color2 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods // Each value is for a row, bit 0 is column 0 // Alpha=0 Mod=1 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage // TODO: refactor with new user EEPROM code (coming soon) #define EEPROM_MAGIC 0x451F #define EEPROM_MAGIC_ADDR 32 // Bump this every time we change what we store // This will automatically reset the EEPROM with defaults // and avoid loading invalid data from the EEPROM #define EEPROM_VERSION 0x08 #define EEPROM_VERSION_ADDR 34 // Backlight config starts after EEPROM version #define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 // Dynamic keymap starts after backlight config (35+43) #define DYNAMIC_KEYMAP_EEPROM_ADDR 78 // Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48) #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126 #define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898 #define DYNAMIC_KEYMAP_MACRO_COUNT 16